2017-06-01 03:25:57 -07:00
|
|
|
#####################################################################
|
|
|
|
# srsENB configuration file
|
|
|
|
#####################################################################
|
|
|
|
|
|
|
|
#####################################################################
|
|
|
|
# eNB configuration
|
|
|
|
#
|
|
|
|
# enb_id: 20-bit eNB identifier.
|
|
|
|
# mcc: Mobile Country Code
|
|
|
|
# mnc: Mobile Network Code
|
|
|
|
# mme_addr: IP address of MME for S1 connnection
|
|
|
|
# gtp_bind_addr: Local IP address to bind for GTP connection
|
2018-07-16 01:06:33 -07:00
|
|
|
# s1c_bind_addr: Local IP address to bind for S1AP connection
|
2017-08-31 11:25:22 -07:00
|
|
|
# n_prb: Number of Physical Resource Blocks (6,15,25,50,75,100)
|
2018-02-26 07:42:52 -08:00
|
|
|
# tm: Transmission mode 1-4 (TM1 default)
|
|
|
|
# nof_ports: Number of Tx ports (1 port default, set to 2 for TM2/3/4)
|
2017-06-01 03:25:57 -07:00
|
|
|
#
|
|
|
|
#####################################################################
|
|
|
|
[enb]
|
|
|
|
enb_id = 0x19B
|
|
|
|
mcc = 001
|
|
|
|
mnc = 01
|
2018-01-21 03:13:08 -08:00
|
|
|
mme_addr = 127.0.1.100
|
2018-07-09 02:52:17 -07:00
|
|
|
gtp_bind_addr = 127.0.1.1
|
|
|
|
s1c_bind_addr = 127.0.1.1
|
2018-01-21 03:13:08 -08:00
|
|
|
n_prb = 50
|
2018-02-26 07:42:52 -08:00
|
|
|
#tm = 4
|
|
|
|
#nof_ports = 2
|
|
|
|
|
2017-06-01 03:25:57 -07:00
|
|
|
#####################################################################
|
|
|
|
# eNB configuration files
|
|
|
|
#
|
2018-07-02 08:51:09 -07:00
|
|
|
# sib_config: SIB1, SIB2 and SIB3 configuration file
|
|
|
|
# note: when enabling mbms, use the sib.conf.mbsfn configuration file which includes SIB13
|
2017-06-01 03:25:57 -07:00
|
|
|
# rr_config: Radio Resources configuration file
|
|
|
|
# drb_config: DRB configuration file
|
|
|
|
#####################################################################
|
|
|
|
[enb_files]
|
|
|
|
sib_config = sib.conf
|
|
|
|
rr_config = rr.conf
|
|
|
|
drb_config = drb.conf
|
|
|
|
|
|
|
|
#####################################################################
|
|
|
|
# RF configuration
|
|
|
|
#
|
2020-03-06 01:58:02 -08:00
|
|
|
# dl_earfcn: EARFCN code for DL (only valid if a single cell is configured in rr.conf)
|
2017-06-01 03:25:57 -07:00
|
|
|
# tx_gain: Transmit gain (dB).
|
|
|
|
# rx_gain: Optional receive gain (dB). If disabled, AGC if enabled
|
|
|
|
#
|
2017-10-10 03:33:10 -07:00
|
|
|
# Optional parameters:
|
|
|
|
# dl_freq: Override DL frequency corresponding to dl_earfcn
|
|
|
|
# ul_freq: Override UL frequency corresponding to dl_earfcn (must be set if dl_freq is set)
|
2017-06-01 03:25:57 -07:00
|
|
|
# device_name: Device driver family. Supported options: "auto" (uses first found), "UHD" or "bladeRF"
|
|
|
|
# device_args: Arguments for the device driver. Options are "auto" or any string.
|
|
|
|
# Default for UHD: "recv_frame_size=9232,send_frame_size=9232"
|
|
|
|
# Default for bladeRF: ""
|
2020-03-06 06:26:48 -08:00
|
|
|
# time_adv_nsamples: Transmission time advance (in number of samples) to compensate for RF delay
|
2017-06-01 03:25:57 -07:00
|
|
|
# from antenna to timestamp insertion.
|
|
|
|
# Default "auto". B210 USRP: 100 samples, bladeRF: 27.
|
|
|
|
#####################################################################
|
|
|
|
[rf]
|
2020-03-06 01:58:02 -08:00
|
|
|
#dl_earfcn = 3400
|
2018-01-21 03:13:08 -08:00
|
|
|
tx_gain = 80
|
2017-10-01 12:04:41 -07:00
|
|
|
rx_gain = 40
|
2017-06-01 03:25:57 -07:00
|
|
|
|
|
|
|
#device_name = auto
|
2019-07-12 08:27:50 -07:00
|
|
|
|
|
|
|
# For best performance in 2x2 MIMO and >= 15 MHz use the following device_args settings:
|
2019-09-27 09:59:55 -07:00
|
|
|
# USRP B210: num_recv_frames=64,num_send_frames=64
|
|
|
|
|
|
|
|
# For best performance when BW<5 MHz (25 PRB), use the following device_args settings:
|
|
|
|
# USRP B210: send_frame_size=512,recv_frame_size=512
|
2019-07-12 08:27:50 -07:00
|
|
|
|
2017-06-01 03:25:57 -07:00
|
|
|
#device_args = auto
|
|
|
|
#time_adv_nsamples = auto
|
|
|
|
|
2020-04-25 12:40:23 -07:00
|
|
|
# Example for ZMQ-based operation with TCP transport for I/Q samples
|
|
|
|
#device_name = zmq
|
|
|
|
#device_args = fail_on_disconnect=true,tx_port=tcp://*:2000,rx_port=tcp://localhost:2001,id=enb,base_srate=23.04e6
|
2017-06-01 03:25:57 -07:00
|
|
|
|
|
|
|
#####################################################################
|
2020-03-06 09:48:12 -08:00
|
|
|
# Packet capture configuration
|
2017-06-01 03:25:57 -07:00
|
|
|
#
|
2020-03-06 09:48:12 -08:00
|
|
|
# MAC Packets are captured to file in the compact format decoded by
|
2017-06-01 03:25:57 -07:00
|
|
|
# the Wireshark mac-lte-framed dissector and with DLT 147.
|
|
|
|
# To use the dissector, edit the preferences for DLT_USER to
|
|
|
|
# add an entry with DLT=147, Payload Protocol=mac-lte-framed.
|
|
|
|
# For more information see: https://wiki.wireshark.org/MAC-LTE
|
|
|
|
#
|
2019-08-04 03:14:13 -07:00
|
|
|
# Please note that this setting will by default only capture MAC
|
|
|
|
# frames on dedicated channels, and not SIB. You have to build with
|
|
|
|
# WRITE_SIB_PCAP enabled in srsenb/src/stack/mac/mac.cc if you want
|
|
|
|
# SIB to be part of the MAC pcap file.
|
|
|
|
#
|
2020-03-06 09:48:12 -08:00
|
|
|
# S1AP Packets are captured to file in the compact format decoded by
|
|
|
|
# the Wireshark s1ap dissector and with DLT 150.
|
|
|
|
# To use the dissector, edit the preferences for DLT_USER to
|
|
|
|
# add an entry with DLT=150, Payload Protocol=s1ap.
|
|
|
|
#
|
|
|
|
# mac_enable: Enable MAC layer packet captures (true/false)
|
|
|
|
# mac_filename: File path to use for packet captures
|
|
|
|
# s1ap_enable: Enable or disable the PCAP.
|
|
|
|
# s1ap_filename: File name where to save the PCAP.
|
|
|
|
#
|
2017-06-01 03:25:57 -07:00
|
|
|
#####################################################################
|
|
|
|
[pcap]
|
2020-03-09 08:20:41 -07:00
|
|
|
enable = false
|
|
|
|
filename = /tmp/enb.pcap
|
2020-03-06 09:48:12 -08:00
|
|
|
s1ap_enable = false
|
|
|
|
s1ap_filename = /tmp/enb_s1ap.pcap
|
2017-06-01 03:25:57 -07:00
|
|
|
|
|
|
|
#####################################################################
|
|
|
|
# Log configuration
|
|
|
|
#
|
|
|
|
# Log levels can be set for individual layers. "all_level" sets log
|
|
|
|
# level for all layers unless otherwise configured.
|
|
|
|
# Format: e.g. phy_level = info
|
|
|
|
#
|
|
|
|
# In the same way, packet hex dumps can be limited for each level.
|
|
|
|
# "all_hex_limit" sets the hex limit for all layers unless otherwise
|
|
|
|
# configured.
|
|
|
|
# Format: e.g. phy_hex_limit = 32
|
|
|
|
#
|
2020-05-05 06:36:33 -07:00
|
|
|
# Logging layers: rf, phy, phy_lib, mac, rlc, pdcp, rrc, gtpu, s1ap, stack, all
|
2017-06-01 03:25:57 -07:00
|
|
|
# Logging levels: debug, info, warning, error, none
|
|
|
|
#
|
2017-09-21 12:21:35 -07:00
|
|
|
# filename: File path to use for log output. Can be set to stdout
|
|
|
|
# to print logs to standard output
|
2018-01-16 03:44:22 -08:00
|
|
|
# file_max_size: Maximum file size (in kilobytes). When passed, multiple files are created.
|
|
|
|
# If set to negative, a single log file will be created.
|
2017-10-05 12:17:17 -07:00
|
|
|
#####################################################################
|
2017-06-01 03:25:57 -07:00
|
|
|
[log]
|
2018-07-17 00:43:30 -07:00
|
|
|
all_level = warning
|
2017-06-01 03:25:57 -07:00
|
|
|
all_hex_limit = 32
|
|
|
|
filename = /tmp/enb.log
|
2018-01-16 03:44:22 -08:00
|
|
|
file_max_size = -1
|
2017-06-01 03:25:57 -07:00
|
|
|
|
|
|
|
[gui]
|
|
|
|
enable = false
|
|
|
|
|
|
|
|
#####################################################################
|
|
|
|
# Scheduler configuration options
|
|
|
|
#
|
2019-10-23 09:09:39 -07:00
|
|
|
# max_aggr_level: Optional maximum aggregation level index (l=log2(L) can be 0, 1, 2 or 3)
|
2017-06-01 03:25:57 -07:00
|
|
|
# pdsch_mcs: Optional fixed PDSCH MCS (ignores reported CQIs if specified)
|
|
|
|
# pdsch_max_mcs: Optional PDSCH MCS limit
|
|
|
|
# pusch_mcs: Optional fixed PUSCH MCS (ignores reported CQIs if specified)
|
|
|
|
# pusch_max_mcs: Optional PUSCH MCS limit
|
2020-03-18 06:27:56 -07:00
|
|
|
# min_nof_ctrl_symbols: Minimum number of control symbols
|
|
|
|
# max_nof_ctrl_symbols: Maximum number of control symbols
|
2017-06-01 03:25:57 -07:00
|
|
|
#
|
|
|
|
#####################################################################
|
|
|
|
[scheduler]
|
2019-10-23 09:09:39 -07:00
|
|
|
#max_aggr_level = -1
|
2017-06-01 03:25:57 -07:00
|
|
|
#pdsch_mcs = -1
|
|
|
|
#pdsch_max_mcs = -1
|
|
|
|
#pusch_mcs = -1
|
2017-10-07 14:40:59 -07:00
|
|
|
pusch_max_mcs = 16
|
2020-03-18 06:27:56 -07:00
|
|
|
#min_nof_ctrl_symbols = 1
|
|
|
|
#max_nof_ctrl_symbols = 3
|
2017-06-01 03:25:57 -07:00
|
|
|
|
2019-07-19 07:09:28 -07:00
|
|
|
#####################################################################
|
|
|
|
# eMBMS configuration options
|
|
|
|
#
|
|
|
|
# enable: Enable MBMS transmission in the eNB
|
|
|
|
# m1u_multiaddr: Multicast addres the M1-U socket will register to
|
|
|
|
# m1u_if_addr: Address of the inteferface the M1-U interface will listen for multicast packets.
|
2020-05-01 07:23:27 -07:00
|
|
|
# mcs: Modulation and Coding scheme for MBMS traffic.
|
2019-07-19 07:09:28 -07:00
|
|
|
#
|
|
|
|
#####################################################################
|
2019-11-18 08:35:35 -08:00
|
|
|
[embms]
|
2019-07-19 07:09:28 -07:00
|
|
|
#enable = false
|
|
|
|
#m1u_multiaddr = 239.255.0.1
|
|
|
|
#m1u_if_addr = 127.0.1.201
|
2020-05-01 07:23:27 -07:00
|
|
|
#mcs = 20
|
2019-07-19 07:09:28 -07:00
|
|
|
|
2019-10-23 09:09:39 -07:00
|
|
|
|
|
|
|
|
|
|
|
#####################################################################
|
|
|
|
# Channel emulator options:
|
|
|
|
# enable: Enable/Disable internal Downlink/Uplink channel emulator
|
|
|
|
#
|
2020-03-22 16:03:12 -07:00
|
|
|
# -- AWGN Generator
|
|
|
|
# awgn.enable: Enable/disable AWGN generator
|
|
|
|
# awgn.n0: Noise power in dBfs
|
|
|
|
#
|
2019-10-23 09:09:39 -07:00
|
|
|
# -- Fading emulator
|
|
|
|
# fading.enable: Enable/disable fading simulator
|
|
|
|
# fading.model: Fading model + maximum doppler (E.g. none, epa5, eva70, etu300, etc)
|
|
|
|
#
|
|
|
|
# -- Delay Emulator delay(t) = delay_min + (delay_max - delay_min) * (1 + sin(2pi*t/period)) / 2
|
|
|
|
# Maximum speed [m/s]: (delay_max - delay_min) * pi * 300 / period
|
|
|
|
# delay.enable: Enable/disable delay simulator
|
|
|
|
# delay.period_s: Delay period in seconds.
|
|
|
|
# delay.init_time_s: Delay initial time in seconds.
|
|
|
|
# delay.maximum_us: Maximum delay in microseconds
|
|
|
|
# delay.minumum_us: Minimum delay in microseconds
|
|
|
|
#
|
|
|
|
# -- Radio-Link Failure (RLF) Emulator
|
|
|
|
# rlf.enable: Enable/disable RLF simulator
|
|
|
|
# rlf.t_on_ms: Time for On state of the channel (ms)
|
|
|
|
# rlf.t_off_ms: Time for Off state of the channel (ms)
|
|
|
|
#
|
|
|
|
# -- High Speed Train Doppler model simulator
|
|
|
|
# hst.enable: Enable/Disable HST simulator
|
|
|
|
# hst.period_s: HST simulation period in seconds
|
|
|
|
# hst.fd_hz: Doppler frequency in Hz
|
|
|
|
# hst.init_time_s: Initial time in seconds
|
|
|
|
#####################################################################
|
|
|
|
[channel.dl]
|
|
|
|
#enable = false
|
|
|
|
|
2020-03-22 16:03:12 -07:00
|
|
|
[channel.dl.awgn]
|
|
|
|
#enable = false
|
|
|
|
#n0 = -30
|
|
|
|
|
2019-10-23 09:09:39 -07:00
|
|
|
[channel.dl.fading]
|
|
|
|
#enable = false
|
|
|
|
#model = none
|
|
|
|
|
|
|
|
[channel.dl.delay]
|
|
|
|
#enable = false
|
|
|
|
#period_s = 3600
|
|
|
|
#init_time_s = 0
|
|
|
|
#maximum_us = 100
|
|
|
|
#minimum_us = 10
|
|
|
|
|
|
|
|
[channel.dl.rlf]
|
|
|
|
#enable = false
|
|
|
|
#t_on_ms = 10000
|
|
|
|
#t_off_ms = 2000
|
|
|
|
|
|
|
|
[channel.dl.hst]
|
|
|
|
#enable = false
|
|
|
|
#period_s = 7.2
|
|
|
|
#fd_hz = 750.0
|
|
|
|
#init_time_s = 0.0
|
|
|
|
|
|
|
|
[channel.ul]
|
|
|
|
#enable = false
|
|
|
|
|
2020-03-22 16:03:12 -07:00
|
|
|
[channel.ul.awgn]
|
|
|
|
#enable = false
|
|
|
|
#n0 = -30
|
|
|
|
|
2019-10-23 09:09:39 -07:00
|
|
|
[channel.ul.fading]
|
|
|
|
#enable = false
|
|
|
|
#model = none
|
|
|
|
|
|
|
|
[channel.ul.delay]
|
|
|
|
#enable = false
|
|
|
|
#period_s = 3600
|
|
|
|
#init_time_s = 0
|
|
|
|
#maximum_us = 100
|
|
|
|
#minimum_us = 10
|
|
|
|
|
|
|
|
[channel.ul.rlf]
|
|
|
|
#enable = false
|
|
|
|
#t_on_ms = 10000
|
|
|
|
#t_off_ms = 2000
|
|
|
|
|
|
|
|
[channel.ul.hst]
|
|
|
|
#enable = false
|
|
|
|
#period_s = 7.2
|
|
|
|
#fd_hz = -750.0
|
|
|
|
#init_time_s = 0.0
|
|
|
|
|
|
|
|
|
2017-06-01 03:25:57 -07:00
|
|
|
#####################################################################
|
|
|
|
# Expert configuration options
|
|
|
|
#
|
2018-09-04 08:51:35 -07:00
|
|
|
# pusch_max_its: Maximum number of turbo decoder iterations (Default 4)
|
|
|
|
# pusch_8bit_decoder: Use 8-bit for LLR representation and turbo decoder trellis computation (Experimental)
|
2017-06-01 03:25:57 -07:00
|
|
|
# nof_phy_threads: Selects the number of PHY threads (maximum 4, minimum 1, default 2)
|
2018-11-20 02:59:04 -08:00
|
|
|
# metrics_period_secs: Sets the period at which metrics are requested from the eNB.
|
|
|
|
# metrics_csv_enable: Write eNB metrics to CSV file.
|
|
|
|
# metrics_csv_filename: File path to use for CSV metrics.
|
2017-06-01 03:25:57 -07:00
|
|
|
# pregenerate_signals: Pregenerate uplink signals after attach. Improves CPU performance.
|
|
|
|
# tx_amplitude: Transmit amplitude factor (set 0-1 to reduce PAPR)
|
2018-09-04 08:51:35 -07:00
|
|
|
# max_prach_offset_us: Maximum allowed RACH offset (in us)
|
2019-07-19 07:09:28 -07:00
|
|
|
# eea_pref_list: Ordered preference list for the selection of encryption algorithm (EEA) (default: EEA0, EEA2, EEA1).
|
2019-02-15 04:45:00 -08:00
|
|
|
# eia_pref_list: Ordered preference list for the selection of integrity algorithm (EIA) (default: EIA2, EIA1, EIA0).
|
2017-06-02 04:32:26 -07:00
|
|
|
#
|
2017-06-01 03:25:57 -07:00
|
|
|
#####################################################################
|
|
|
|
[expert]
|
2018-09-04 08:51:35 -07:00
|
|
|
#pusch_max_its = 8 # These are half iterations
|
|
|
|
#pusch_8bit_decoder = false
|
2019-04-23 01:53:11 -07:00
|
|
|
#nof_phy_threads = 3
|
2018-11-20 02:59:04 -08:00
|
|
|
#metrics_period_secs = 1
|
|
|
|
#metrics_csv_enable = false
|
|
|
|
#metrics_csv_filename = /tmp/enb_metrics.csv
|
2017-06-01 03:25:57 -07:00
|
|
|
#pregenerate_signals = false
|
2017-08-22 06:06:32 -07:00
|
|
|
#tx_amplitude = 0.6
|
2018-07-06 07:28:54 -07:00
|
|
|
#rrc_inactivity_timer = 60000
|
2017-06-02 04:32:26 -07:00
|
|
|
#max_prach_offset_us = 30
|
2019-02-15 04:45:00 -08:00
|
|
|
#eea_pref_list = EEA0, EEA2, EEA1
|
2020-03-06 09:48:12 -08:00
|
|
|
#eia_pref_list = EIA2, EIA1, EIA0
|