2017-06-01 03:25:57 -07:00
|
|
|
#####################################################################
|
|
|
|
# srsENB configuration file
|
|
|
|
#####################################################################
|
|
|
|
|
|
|
|
#####################################################################
|
|
|
|
# eNB configuration
|
|
|
|
#
|
|
|
|
# enb_id: 20-bit eNB identifier.
|
|
|
|
# cell_id: 8-bit cell identifier.
|
|
|
|
# tac: 16-bit Tracking Area Code.
|
|
|
|
# mcc: Mobile Country Code
|
|
|
|
# mnc: Mobile Network Code
|
|
|
|
# mme_addr: IP address of MME for S1 connnection
|
|
|
|
# gtp_bind_addr: Local IP address to bind for GTP connection
|
2017-08-31 11:25:22 -07:00
|
|
|
# n_prb: Number of Physical Resource Blocks (6,15,25,50,75,100)
|
2017-06-01 03:25:57 -07:00
|
|
|
#
|
|
|
|
#####################################################################
|
|
|
|
[enb]
|
|
|
|
enb_id = 0x19B
|
|
|
|
cell_id = 0x01
|
|
|
|
phy_cell_id = 1
|
|
|
|
tac = 0x0007
|
|
|
|
mcc = 001
|
|
|
|
mnc = 01
|
|
|
|
mme_addr = 127.0.1.100
|
|
|
|
gtp_bind_addr = 127.0.1.1
|
|
|
|
n_prb = 25
|
|
|
|
|
|
|
|
#####################################################################
|
|
|
|
# eNB configuration files
|
|
|
|
#
|
|
|
|
# sib_config: SIB1, SIB2 and SIB3 configuration file
|
|
|
|
# rr_config: Radio Resources configuration file
|
|
|
|
# drb_config: DRB configuration file
|
|
|
|
#####################################################################
|
|
|
|
[enb_files]
|
|
|
|
sib_config = sib.conf
|
|
|
|
rr_config = rr.conf
|
|
|
|
drb_config = drb.conf
|
|
|
|
|
|
|
|
#####################################################################
|
|
|
|
# RF configuration
|
|
|
|
#
|
|
|
|
# dl_earfcn: EARFCN code for DL
|
|
|
|
# tx_gain: Transmit gain (dB).
|
|
|
|
# rx_gain: Optional receive gain (dB). If disabled, AGC if enabled
|
|
|
|
#
|
|
|
|
# Optional parameters:
|
|
|
|
# device_name: Device driver family. Supported options: "auto" (uses first found), "UHD" or "bladeRF"
|
|
|
|
# device_args: Arguments for the device driver. Options are "auto" or any string.
|
|
|
|
# Default for UHD: "recv_frame_size=9232,send_frame_size=9232"
|
|
|
|
# Default for bladeRF: ""
|
|
|
|
# #time_adv_nsamples: Transmission time advance (in number of samples) to compensate for RF delay
|
|
|
|
# from antenna to timestamp insertion.
|
|
|
|
# Default "auto". B210 USRP: 100 samples, bladeRF: 27.
|
|
|
|
# burst_preamble_us: Preamble length to transmit before start of burst.
|
|
|
|
# Default "auto". B210 USRP: 400 us, bladeRF: 0 us.
|
|
|
|
#####################################################################
|
|
|
|
[rf]
|
|
|
|
dl_earfcn = 3400
|
2017-10-01 12:04:41 -07:00
|
|
|
tx_gain = 70
|
|
|
|
rx_gain = 40
|
2017-06-01 03:25:57 -07:00
|
|
|
|
|
|
|
#device_name = auto
|
|
|
|
#device_args = auto
|
|
|
|
#time_adv_nsamples = auto
|
|
|
|
#burst_preamble_us = auto
|
|
|
|
|
|
|
|
|
|
|
|
#####################################################################
|
|
|
|
# MAC-layer packet capture configuration
|
|
|
|
#
|
|
|
|
# Packets are captured to file in the compact format decoded by
|
|
|
|
# the Wireshark mac-lte-framed dissector and with DLT 147.
|
|
|
|
# To use the dissector, edit the preferences for DLT_USER to
|
|
|
|
# add an entry with DLT=147, Payload Protocol=mac-lte-framed.
|
|
|
|
# For more information see: https://wiki.wireshark.org/MAC-LTE
|
|
|
|
#
|
|
|
|
# enable: Enable MAC layer packet captures (true/false)
|
|
|
|
# filename: File path to use for packet captures
|
|
|
|
#####################################################################
|
|
|
|
[pcap]
|
|
|
|
enable = false
|
|
|
|
filename = /tmp/enb.pcap
|
|
|
|
|
|
|
|
#####################################################################
|
|
|
|
# Log configuration
|
|
|
|
#
|
|
|
|
# Log levels can be set for individual layers. "all_level" sets log
|
|
|
|
# level for all layers unless otherwise configured.
|
|
|
|
# Format: e.g. phy_level = info
|
|
|
|
#
|
|
|
|
# In the same way, packet hex dumps can be limited for each level.
|
|
|
|
# "all_hex_limit" sets the hex limit for all layers unless otherwise
|
|
|
|
# configured.
|
|
|
|
# Format: e.g. phy_hex_limit = 32
|
|
|
|
#
|
|
|
|
# Logging layers: phy, mac, rlc, pdcp, rrc, nas, gtpu, usim, all
|
|
|
|
# Logging levels: debug, info, warning, error, none
|
|
|
|
#
|
2017-09-21 12:21:35 -07:00
|
|
|
# filename: File path to use for log output. Can be set to stdout
|
|
|
|
# to print logs to standard output
|
2017-10-05 12:17:17 -07:00
|
|
|
#####################################################################
|
2017-06-01 03:25:57 -07:00
|
|
|
[log]
|
|
|
|
all_level = info
|
|
|
|
all_hex_limit = 32
|
|
|
|
filename = /tmp/enb.log
|
|
|
|
|
|
|
|
[gui]
|
|
|
|
enable = false
|
|
|
|
|
|
|
|
#####################################################################
|
|
|
|
# Scheduler configuration options
|
|
|
|
#
|
|
|
|
# pdsch_mcs: Optional fixed PDSCH MCS (ignores reported CQIs if specified)
|
|
|
|
# pdsch_max_mcs: Optional PDSCH MCS limit
|
|
|
|
# pusch_mcs: Optional fixed PUSCH MCS (ignores reported CQIs if specified)
|
|
|
|
# pusch_max_mcs: Optional PUSCH MCS limit
|
|
|
|
# #nof_ctrl_symbols: Number of control symbols
|
|
|
|
#
|
|
|
|
#####################################################################
|
|
|
|
[scheduler]
|
|
|
|
#pdsch_mcs = -1
|
|
|
|
#pdsch_max_mcs = -1
|
|
|
|
#pusch_mcs = -1
|
2017-08-29 07:22:45 -07:00
|
|
|
#pusch_max_mcs = -1
|
2017-06-02 04:32:26 -07:00
|
|
|
nof_ctrl_symbols = 2
|
2017-06-01 03:25:57 -07:00
|
|
|
|
|
|
|
#####################################################################
|
|
|
|
# Expert configuration options
|
|
|
|
#
|
|
|
|
# pdsch_max_its: Maximum number of turbo decoder iterations (Default 4)
|
|
|
|
# nof_phy_threads: Selects the number of PHY threads (maximum 4, minimum 1, default 2)
|
|
|
|
# metrics_period_secs: Sets the period at which metrics are requested from the UE.
|
|
|
|
# pregenerate_signals: Pregenerate uplink signals after attach. Improves CPU performance.
|
|
|
|
# tx_amplitude: Transmit amplitude factor (set 0-1 to reduce PAPR)
|
|
|
|
# link_failure_nof_err: Number of PUSCH failures after which a radio-link failure is triggered.
|
|
|
|
# a link failure is when SNR<0 and CRC=KO
|
2017-06-02 04:32:26 -07:00
|
|
|
# max_prach_offset_us: Maximum allowed RACH offset (in us)
|
|
|
|
#
|
2017-06-01 03:25:57 -07:00
|
|
|
#####################################################################
|
|
|
|
[expert]
|
|
|
|
#pdsch_max_its = 4
|
|
|
|
#nof_phy_threads = 2
|
|
|
|
#pregenerate_signals = false
|
2017-08-22 06:06:32 -07:00
|
|
|
#tx_amplitude = 0.6
|
2017-06-02 07:28:31 -07:00
|
|
|
#link_failure_nof_err = 50
|
2017-08-22 06:06:32 -07:00
|
|
|
#rrc_inactivity_timer = 10000
|
2017-06-02 04:32:26 -07:00
|
|
|
#max_prach_offset_us = 30
|
2017-06-01 03:25:57 -07:00
|
|
|
|
|
|
|
#####################################################################
|
|
|
|
# Manual RF calibration
|
|
|
|
#
|
|
|
|
# Applies DC offset and IQ imbalance to TX and RX modules.
|
|
|
|
# Currently this configuration is only used if the detected device is a bladeRF
|
|
|
|
#
|
|
|
|
# tx_corr_dc_gain: TX DC offset gain correction
|
|
|
|
# tx_corr_dc_phase: TX DC offset phase correction
|
|
|
|
# tx_corr_iq_i: TX IQ imbalance inphase correction
|
|
|
|
# tx_corr_iq_q: TX IQ imbalance quadrature correction
|
|
|
|
# same can be configured for rx_*
|
|
|
|
#####################################################################
|
|
|
|
[rf_calibration]
|
|
|
|
tx_corr_dc_gain = 20
|
|
|
|
tx_corr_dc_phase = 184
|
|
|
|
tx_corr_iq_i = 19
|
|
|
|
tx_corr_iq_q = 97
|