mirror of https://github.com/PentHertz/srsLTE.git
ue, config: Add srate parameter to ue config file.
This commit is contained in:
Fabian Eckermann
Andre Puschmann
parent
0c562336d2
commit
628b1d42f6
|
|
@ -6,18 +6,19 @@
|
|||
# RF configuration
|
||||
#
|
||||
# freq_offset: Uplink and Downlink optional frequency offset (in Hz)
|
||||
# tx_gain: Transmit gain (dB).
|
||||
# tx_gain: Transmit gain (dB).
|
||||
# rx_gain: Optional receive gain (dB). If disabled, AGC if enabled
|
||||
# srate: Optional fixed sampling rate (Hz), corresponding to cell bandwidth. Must be set for 5G-SA.
|
||||
#
|
||||
# nof_antennas: Number of antennas per carrier (all carriers have the same number of antennas)
|
||||
# device_name: Device driver family. Supported options: "auto" (uses first found), "UHD" or "bladeRF"
|
||||
# device_args: Arguments for the device driver. Options are "auto" or any string.
|
||||
# device_name: Device driver family. Supported options: "auto" (uses first found), "UHD" or "bladeRF"
|
||||
# device_args: Arguments for the device driver. Options are "auto" or any string.
|
||||
# Default for UHD: "recv_frame_size=9232,send_frame_size=9232"
|
||||
# Default for bladeRF: ""
|
||||
# device_args_2: Arguments for the RF device driver 2.
|
||||
# device_args_3: Arguments for the RF device driver 3.
|
||||
# time_adv_nsamples: Transmission time advance (in number of samples) to compensate for RF delay
|
||||
# from antenna to timestamp insertion.
|
||||
# from antenna to timestamp insertion.
|
||||
# Default "auto". B210 USRP: 100 samples, bladeRF: 27.
|
||||
# continuous_tx: Transmit samples continuously to the radio or on bursts (auto/yes/no).
|
||||
# Default is auto (yes for UHD, no for rest)
|
||||
|
|
@ -26,6 +27,7 @@
|
|||
freq_offset = 0
|
||||
tx_gain = 80
|
||||
#rx_gain = 40
|
||||
#srate = 11.52e6
|
||||
|
||||
#nof_antennas = 1
|
||||
|
||||
|
|
@ -45,10 +47,10 @@ tx_gain = 80
|
|||
|
||||
#####################################################################
|
||||
# EUTRA RAT configuration
|
||||
#
|
||||
#
|
||||
# dl_earfcn: Downlink EARFCN list.
|
||||
#
|
||||
# Optional parameters:
|
||||
# Optional parameters:
|
||||
# dl_freq: Override DL frequency corresponding to dl_earfcn
|
||||
# ul_freq: Override UL frequency corresponding to dl_earfcn
|
||||
# nof_carriers: Number of carriers
|
||||
|
|
@ -59,8 +61,8 @@ dl_earfcn = 3350
|
|||
|
||||
#####################################################################
|
||||
# NR RAT configuration
|
||||
#
|
||||
# Optional parameters:
|
||||
#
|
||||
# Optional parameters:
|
||||
# bands: List of support NR bands seperated by a comma (default 78)
|
||||
# nof_carriers: Number of NR carriers (must be at least 1 for NR support)
|
||||
#####################################################################
|
||||
|
|
@ -71,19 +73,19 @@ dl_earfcn = 3350
|
|||
#####################################################################
|
||||
# Packet capture configuration
|
||||
#
|
||||
# Packet capture is supported at the MAC, MAC_NR, and NAS layer.
|
||||
# MAC-layer packets are captured to file a the compact format decoded
|
||||
# by the Wireshark. For decoding, use the UDP dissector and the UDP
|
||||
# heuristic dissection. Edit the preferences (Edit > Preferences >
|
||||
# Protocols > DLT_USER) for DLT_USER to add an entry for DLT=149 with
|
||||
# Packet capture is supported at the MAC, MAC_NR, and NAS layer.
|
||||
# MAC-layer packets are captured to file a the compact format decoded
|
||||
# by the Wireshark. For decoding, use the UDP dissector and the UDP
|
||||
# heuristic dissection. Edit the preferences (Edit > Preferences >
|
||||
# Protocols > DLT_USER) for DLT_USER to add an entry for DLT=149 with
|
||||
# Protocol=udp. Further, enable the heuristic dissection in UDP under:
|
||||
# Analyze > Enabled Protocols > MAC-LTE > mac_lte_udp and MAC-NR > mac_nr_udp
|
||||
# For more information see: https://wiki.wireshark.org/MAC-LTE
|
||||
# Using the same filename for mac_filename and mac_nr_filename writes both
|
||||
# MAC-LTE and MAC-NR to the same file allowing a better analysis.
|
||||
# MAC-LTE and MAC-NR to the same file allowing a better analysis.
|
||||
# NAS-layer packets are dissected with DLT=148, and Protocol = nas-eps.
|
||||
#
|
||||
# enable: Enable packet captures of layers (mac/mac_nr/nas/none) multiple option list
|
||||
# enable: Enable packet captures of layers (mac/mac_nr/nas/none) multiple option list
|
||||
# mac_filename: File path to use for MAC packet capture
|
||||
# mac_nr_filename: File path to use for MAC NR packet capture
|
||||
# nas_filename: File path to use for NAS packet capture
|
||||
|
|
@ -141,7 +143,7 @@ algo = xor
|
|||
k = 00112233445566778899aabbccddeeff
|
||||
imsi = 001010123456789
|
||||
imei = 353490069873319
|
||||
#reader =
|
||||
#reader =
|
||||
#pin = 1234
|
||||
|
||||
#####################################################################
|
||||
|
|
@ -303,18 +305,18 @@ enable = false
|
|||
#
|
||||
# rx_gain_offset: RX Gain offset to add to rx_gain to calibrate RSRP readings
|
||||
# prach_gain: PRACH gain (dB). If defined, forces a gain for the tranmsission of PRACH only.,
|
||||
# Default is to use tx_gain in [rf] section.
|
||||
# cqi_max: Upper bound on the maximum CQI to be reported. Default 15.
|
||||
# Default is to use tx_gain in [rf] section.
|
||||
# cqi_max: Upper bound on the maximum CQI to be reported. Default 15.
|
||||
# cqi_fixed: Fixes the reported CQI to a constant value. Default disabled.
|
||||
# snr_ema_coeff: Sets the SNR exponential moving average coefficient (Default 0.1)
|
||||
# snr_estim_alg: Sets the noise estimation algorithm. (Default refs)
|
||||
# Options: pss: use difference between received and known pss signal,
|
||||
# Options: pss: use difference between received and known pss signal,
|
||||
# refs: use difference between noise references and noiseless (after filtering)
|
||||
# empty: use empty subcarriers in the boarder of pss/sss signal
|
||||
# pdsch_max_its: Maximum number of turbo decoder iterations (Default 4)
|
||||
# pdsch_meas_evm: Measure PDSCH EVM, increases CPU load (default false)
|
||||
# nof_phy_threads: Selects the number of PHY threads (maximum 4, minimum 1, default 3)
|
||||
# equalizer_mode: Selects equalizer mode. Valid modes are: "mmse", "zf" or any
|
||||
# equalizer_mode: Selects equalizer mode. Valid modes are: "mmse", "zf" or any
|
||||
# non-negative real number to indicate a regularized zf coefficient.
|
||||
# Default is MMSE.
|
||||
# correct_sync_error: Channel estimator measures and pre-compensates time synchronization error. Increases CPU usage,
|
||||
|
|
@ -322,7 +324,7 @@ enable = false
|
|||
# sfo_ema: EMA coefficient to average sample offsets used to compute SFO
|
||||
# sfo_correct_period: Period in ms to correct sample time to adjust for SFO
|
||||
# sss_algorithm: Selects the SSS estimation algorithm. Can choose between
|
||||
# {full, partial, diff}.
|
||||
# {full, partial, diff}.
|
||||
# estimator_fil_auto: The channel estimator smooths the channel estimate with an adaptative filter.
|
||||
# estimator_fil_stddev: Sets the channel estimator smooth gaussian filter standard deviation.
|
||||
# estimator_fil_order: Sets the channel estimator smooth gaussian filter order (even values perform better).
|
||||
|
|
|
|||
Loading…
Reference in New Issue