d5286e70aa
proc_bsr: refactor and add extra print_state() method
...
allows to call the print_state() routine from other places in the BSR
2020-10-28 12:05:53 +01:00
514deaf25b
fix resetting of phy and mac during reestablishment
2020-10-22 19:55:46 +02:00
a366500a78
rrc_proc: init cs_result to none
...
detected by Coverity CID 363053
2020-10-18 15:56:16 +02:00
665b3996bb
now the phy controller handles the scenario where the phy cell selection failed to be initialized
2020-10-16 15:54:42 +01:00
937067a205
proc_phr: rename start_periodic_timer() and make sure its only started if a valid config is present
2020-10-13 17:38:45 +02:00
fab86382c1
mac,rrc: add interface to set SR config explicitly without touching any other MAC function
...
when releasing PUCCH/SRS (see 5.3.13 in 36.331) we need to reset the SR config as well.
In our case, SR is handled by MAC so we need to (re-)configure MAC, not all of
MAC though, just SR.
2020-10-13 17:38:45 +02:00
e7239163e9
silence noisy unhandled in_sync_ev logs
2020-10-12 18:24:14 +01:00
f185272367
added comments explaining the meaning of the cell reselection procedures
2020-10-12 13:42:46 +01:00
49e7b8e36e
- Change periodicity of cell reselection after a new serving cell has been selected
...
- Enable PHY intra measurements during RRC_IDLE
2020-10-12 13:42:46 +01:00
585d7c923a
refactor and simplification of cell selection procedure. Using now a SIB3 threshold to decide whether to select neighbor cell while in RRC_IDLE
2020-10-12 13:42:46 +01:00
5a4e71a6e4
Created k_enb_context structure that holds k_enb, NCC and NH to make it easier to restore context from failed handover.
2020-10-08 09:46:34 +01:00
bcb422736c
Save and restore NH on handover and handover failure.
2020-10-08 09:46:34 +01:00
3eb525563a
Fix issue reading MNC length in USIM.
2020-10-07 10:04:50 +01:00
6ae47b6510
SRSUE: Deafult PUCCH/SRS does not imply full PHY dedicated defaults
2020-10-07 09:58:23 +02:00
22a6dc305f
Moved common variables and functions from the usim and pcsc_usim classes into usim_base class.
2020-10-05 12:14:46 +01:00
4ebe92f6a3
refactor phy configuration in the rrc to keep track of activated scells, and cells configurations
2020-10-02 18:50:29 +01:00
d910c910a4
rrc::meas_cell now uses stack timers instead of system timers.
2020-10-02 17:53:02 +01:00
023d32975a
avoid use of pointers to meas_cells in ho_proc as they may become dangling
2020-10-02 17:53:02 +01:00
072b7be582
renamed rrc::cell_t to rrc::meas_cell
2020-10-02 17:53:02 +01:00
0ef8e1fdac
rrc: include pci when logging serving cell measurement
...
this should facilitate easier log parsing and plotting
if the cell measurements _always_ include the PCI, even
in the case of the serving cell
15:49:11.357447 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=+0.1 Hz
15:49:11.391610 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.4 Hz
15:49:11.427325 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.6 Hz
15:49:11.463101 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.7 Hz
15:49:11.499817 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.51 dBm, cfo=+0.1 Hz
15:49:11.499828 [RRC ] [I] MEAS: New measurement neighbour cell: earfcn=2850, pci=0, rsrp=-12.16 dBm, cfo=-0.8 Hz
15:49:11.535027 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.46 dBm, cfo=-0.8 Hz
15:49:11.571707 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.46 dBm, cfo=-0.9 Hz
15:49:11.607932 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.8 Hz
2020-10-01 20:15:41 +02:00
ddbf4e1645
metrics_stdout: print new table header if neighbour cells change
...
this fixes an issue where the stdout metrics isn't readable if the only
neighbour cell gets removed during the 10s where no table header is printed.
--------Signal--------------Neighbor----DL-------------------------------------UL----------------------
cc pci rsrp pl cfo pci rsrp mcs snr turbo brate bler ta_us mcs buff brate bler
0 2 -66 61 -3.3k 1 -76 11 18 1.1 8.4M 3% 0.0 21 262 167k 0%
0 2 -65 60 -3.3k 1 -76 12 19 1.1 9.6M 2% 0.0 22 476 214k 0%
0 2 -65 60 -3.3k 1 -76 16 22 1.3 13M 3% 0.0 23 1.1k 734k 0%
0 2 -64 59 -3.3k 1 -76 17 23 1.3 15M 2% 0.0 23 602 424k 0%
0 2 -63 58 -3.3k 1 -77 20 25 1.4 19M 3% 0.0 23 501 304k 0%
0 2 -62 57 -3.3k 1 -77 22 27 1.8 20M 10% 0.0 22 417 418k 0%
0 2 -61 56 -3.3k 1 -77 24 28 1.8 25M 9% 0.0 23 396 439k 0%
0 2 -61 56 -3.3k 1 -77 26 29 1.5 23M 22% 0.0 23 841 407k 0%
0 2 -60 55 -3.3k 1 -77 27 31 1.3 27M 11% 0.0 23 890 1.1M 0%
0 2 -59 54 -3.3k 1 -77 27 32 1.00 30M 3% 0.0 23 583 524k 0%
0 2 -59 54 -3.3k 1 -77 27 32 0.92 32M 1% 0.0 23 1.1k 503k 0%
--------Signal--------------DL-------------------------------------UL----------------------
cc pci rsrp pl cfo mcs snr turbo brate bler ta_us mcs buff brate bler
0 2 -59 54 -3.3k 27 31 1.1 30M 4% 0.0 23 1.2k 529k 0%
0 2 -60 55 -3.3k 27 30 1.4 25M 18% 0.0 23 540 442k 0%
0 2 -61 56 -3.3k 26 29 1.6 23M 21% 0.0 23 536 429k 0%
0 2 -62 57 -3.3k 24 28 1.8 23M 13% 0.0 23 834 456k 0%
0 2 -62 57 -3.3k 1 -78 21 26 1.6 20M 7% 0.0 23 723 425k 0%
0 2 -63 58 -3.3k 1 -76 17 22 1.1 15M 3% 0.0 23 470 267k 0%
0 2 -64 59 -3.3k 1 -77 17 22 1.3 15M 3% 0.0 23 167 280k 0%
0 2 -65 60 -3.3k 1 -76 14 21 1.3 11M 2% 0.0 22 57 223k 0%
0 2 -65 60 -3.3k 1 -76 12 19 1.2 9.0M 3% 0.0 21 135 182k 0%
0 2 -66 61 -3.4k 1 -70 9.3 17 1.0 6.9M 2% 0.0 21 246 126k 0%
0 2 -67 62 -3.3k 1 -75 8.2 16 1.1 4.9M 3% 0.0 20 0.0 122k 0%
2020-10-01 20:09:16 +02:00
2f0125ef4e
Fix issue recovering key state, when the first HO fails (specifically, is_first_ncc was not recovered). Minor improvements in key logging.
2020-10-01 18:48:07 +01:00
1f2cca8909
in the rrc reconf procedure, handle the scenario where the rrc reconfiguration message does not config the phy
2020-10-01 11:25:21 +01:00
c6f4776a6f
send the nassdus sooner in the rrc reconf procedure
2020-10-01 11:25:21 +01:00
fc49b5a030
implemented rrc reconfiguration procedure that includes a continuation when phy configuration is complete
2020-10-01 11:25:21 +01:00
b3eb9651d6
disable cqi in scells during handover procedure
2020-09-29 12:10:42 +01:00
8a9a95a937
ensure sibs are acquired if cell selection calls cell search
2020-09-29 11:06:32 +01:00
045f647914
fix edge case where serving cell is good enough for reestablishment but the sibs are not yet acquired
2020-09-28 23:45:13 +01:00
5ecbe8fb17
cleanup of the reestablishment procedure state machine. It does not need to wait for the serving cell configuration because such procedure is already included in the cell selection procedure
2020-09-28 18:39:28 +01:00
b3bfe336a9
Make sure that remote address test has a ip mask
2020-09-28 16:08:28 +02:00
5783c01cbb
tf_packet_filter: Improve support for the different filter types
2020-09-28 16:08:28 +02:00
0997daa7a0
now the handover procedure in the srsUE does not wait for the phy cell selection result. It only waits for the RA result
2020-09-25 13:03:50 +01:00
c75c463263
Use SNR instead of SINR for RLF threshold ( #1769 )
...
* Use SNR instead of SINR for RLF threshold
* Send in/out-sync only for cc_idx=0
2020-09-24 22:26:05 +02:00
86f4d469c6
Added some functions to save and restore AS keys for the case of failed handover in the USIM
2020-09-24 13:30:08 +01:00
b94d24ed98
Take into account CRS from neigbhour cells when measuring interference ( #1757 )
...
* Take into account CRS from neigbhour cells when measuring interference
* fix std::isnormal compilation
* Fixed compilation of test
* Address comments
* Remove unused overrides
2020-09-23 21:46:03 +02:00
cf89d6645b
add comments explaining each function of the reest procedure
2020-09-23 14:59:38 +01:00
d068d594af
implemented rrc reestablishment procedure part after sending reest request
2020-09-23 14:59:38 +01:00
73e21daeb2
refactor reestablishment procedure to more closely follow TS.
2020-09-23 14:59:38 +01:00
1afc137032
[REBASE] Make PHY non-blocking and fefactor HO procedure ( #1753 )
...
* Make PHY non-blocking and fefactor HO procedure
* makes entire PHY non-blocking through command interface
* adds dedicated queue for cell_search/cell_select commands
* refactor HO procedure to run faster, in one stack cycle. Looks closer to the specs
* force ue to always apply SIB2 configuration during reestablishment
* Run update_measurements in all workers
Co-authored-by: Ismael Gomez <ismagom@gmail.com>
2020-09-22 21:47:16 +02:00
7f8af023b8
added a callback that always gets triggered when the phy cell selection completes. This callback checks if cell selection failed, and if so, sets the rsrp of the selected cell to -infinity
2020-09-22 17:09:18 +01:00
5968157ea5
Protect better the access to shared variables in phy_common and metrics ( #1750 )
2020-09-22 14:32:08 +02:00
5acc1c9a73
- Cleaned up style in the PRACH class:
...
* Removed magic numbers.
* Reduced indentation of statements with early exists.
* Removed elses after a return statement.
* Trimmed unnecessary include files.
* Default initialized members in the class.
2020-09-21 09:50:20 +02:00
79f5b62551
- Calculate PRACH buffers on the fly when required instead of pregenerating all of them.
2020-09-21 09:50:20 +02:00
b616944a13
ue,rrc: fix security config during HO/reestablishment
...
we fix a number of very related issues for HO/reestablishment
in the success/error case:
* this patch removes the hard-coded check that intra-cell HO aren't
allowed. There are cases where eNBs use this method to update
the security context.
* the patch also fixes an issue after failed HO where the security context
of the source eNB should be used for the reestablishment.
* update security keys according to specs when mobilitycontrol
indicated change of key
2020-09-21 09:27:07 +02:00
6827c2df21
rrc_meas: disable layer3 filtering until quantity config is received
...
the filter alpha was initialized to zero by default which causes an
issue because the first measurement for a cell can't be updated,
because the filtering function will always return the current value.
According to 36.331 Sec 5.5.3.2 Note 2, a k-value of 0 should turn
off filtering, which should be used as the default value until
an update is received from the network.
2020-09-21 09:27:07 +02:00
5e8a4c898d
Bring back the circular array object. ( #1712 )
2020-09-09 17:16:47 +02:00
52355024e7
SRSUE PHY: move mutex lock to cc worker and unlock for stack calls
2020-09-04 14:01:25 +02:00
f49fbd6d02
Fix the order of HO/reest measurement actions ( #1696 )
2020-09-04 12:18:12 +02:00
aec18a93d1
mux,bsr: refactor UL buffer status reporting
...
this patch fixes the UL BSR as per TS 36.321, it includes following
main changes:
* report UL buffer state to reflect the UEs transmit buffer after
the MAC UL PDU containing the BSR has been built.
In other words, if the UE, for example, can transmit all outstanding
data in an UL grant, it will not report any pending data to transmit.
* refactor MUX routines and subheader space calculation
2020-09-03 15:00:36 +02:00
06a5bdaab2
Process all calls to RLF in the main RRC task
2020-09-01 11:03:02 +02:00
Andre Puschmann
Francisco Paisana
Pedro Alvarez
Xavier Arteaga
Sylvain Munaut
Ismael Gomez
faluco
faluco