David Rupprecht
848496bb0f
Moved get_earfcn to srslte get_carrier_freq func
2020-12-12 15:59:27 +01:00
David Rupprecht
d4fb2dfb16
Added handling of inter rat measurement config function
...
Make report config more agonistic
2020-12-12 15:59:27 +01:00
David Rupprecht
f4b0042c10
Added minimal interrat and nr measurement testcase
...
Added the handling of nr_r15 meas config
Added seperate handling of reportConfig for eutra
2020-12-12 15:59:27 +01:00
Andre Puschmann
07d2bc4fe8
change license header to agnostic version with hint to root LICENSE file
2020-12-12 15:59:25 +01:00
Francisco Paisana
510959b50f
update nr asn1 files, and asn1 tests
2020-12-12 15:58:32 +01:00
Francisco Paisana
514deaf25b
fix resetting of phy and mac during reestablishment
2020-10-22 19:55:46 +02:00
Andre Puschmann
a366500a78
rrc_proc: init cs_result to none
...
detected by Coverity CID 363053
2020-10-18 15:56:16 +02:00
Francisco Paisana
665b3996bb
now the phy controller handles the scenario where the phy cell selection failed to be initialized
2020-10-16 15:54:42 +01:00
Francisco Paisana
e7239163e9
silence noisy unhandled in_sync_ev logs
2020-10-12 18:24:14 +01:00
Francisco Paisana
f185272367
added comments explaining the meaning of the cell reselection procedures
2020-10-12 13:42:46 +01:00
Francisco Paisana
49e7b8e36e
- Change periodicity of cell reselection after a new serving cell has been selected
...
- Enable PHY intra measurements during RRC_IDLE
2020-10-12 13:42:46 +01:00
Francisco Paisana
585d7c923a
refactor and simplification of cell selection procedure. Using now a SIB3 threshold to decide whether to select neighbor cell while in RRC_IDLE
2020-10-12 13:42:46 +01:00
Xavier Arteaga
6ae47b6510
SRSUE: Deafult PUCCH/SRS does not imply full PHY dedicated defaults
2020-10-07 09:58:23 +02:00
Francisco Paisana
4ebe92f6a3
refactor phy configuration in the rrc to keep track of activated scells, and cells configurations
2020-10-02 18:50:29 +01:00
Francisco Paisana
d910c910a4
rrc::meas_cell now uses stack timers instead of system timers.
2020-10-02 17:53:02 +01:00
Francisco Paisana
023d32975a
avoid use of pointers to meas_cells in ho_proc as they may become dangling
2020-10-02 17:53:02 +01:00
Francisco Paisana
072b7be582
renamed rrc::cell_t to rrc::meas_cell
2020-10-02 17:53:02 +01:00
Andre Puschmann
0ef8e1fdac
rrc: include pci when logging serving cell measurement
...
this should facilitate easier log parsing and plotting
if the cell measurements _always_ include the PCI, even
in the case of the serving cell
15:49:11.357447 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=+0.1 Hz
15:49:11.391610 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.4 Hz
15:49:11.427325 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.6 Hz
15:49:11.463101 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.7 Hz
15:49:11.499817 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.51 dBm, cfo=+0.1 Hz
15:49:11.499828 [RRC ] [I] MEAS: New measurement neighbour cell: earfcn=2850, pci=0, rsrp=-12.16 dBm, cfo=-0.8 Hz
15:49:11.535027 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.46 dBm, cfo=-0.8 Hz
15:49:11.571707 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.46 dBm, cfo=-0.9 Hz
15:49:11.607932 [RRC ] [I] MEAS: New measurement serving cell: earfcn=0, pci=1, rsrp=-11.52 dBm, cfo=-0.8 Hz
2020-10-01 20:15:41 +02:00
Francisco Paisana
1f2cca8909
in the rrc reconf procedure, handle the scenario where the rrc reconfiguration message does not config the phy
2020-10-01 11:25:21 +01:00
Francisco Paisana
c6f4776a6f
send the nassdus sooner in the rrc reconf procedure
2020-10-01 11:25:21 +01:00
Francisco Paisana
fc49b5a030
implemented rrc reconfiguration procedure that includes a continuation when phy configuration is complete
2020-10-01 11:25:21 +01:00
Francisco Paisana
b3eb9651d6
disable cqi in scells during handover procedure
2020-09-29 12:10:42 +01:00
Francisco Paisana
8a9a95a937
ensure sibs are acquired if cell selection calls cell search
2020-09-29 11:06:32 +01:00
Francisco Paisana
045f647914
fix edge case where serving cell is good enough for reestablishment but the sibs are not yet acquired
2020-09-28 23:45:13 +01:00
Francisco Paisana
5ecbe8fb17
cleanup of the reestablishment procedure state machine. It does not need to wait for the serving cell configuration because such procedure is already included in the cell selection procedure
2020-09-28 18:39:28 +01:00
Francisco Paisana
0997daa7a0
now the handover procedure in the srsUE does not wait for the phy cell selection result. It only waits for the RA result
2020-09-25 13:03:50 +01:00
Francisco Paisana
cf89d6645b
add comments explaining each function of the reest procedure
2020-09-23 14:59:38 +01:00
Francisco Paisana
d068d594af
implemented rrc reestablishment procedure part after sending reest request
2020-09-23 14:59:38 +01:00
Francisco Paisana
73e21daeb2
refactor reestablishment procedure to more closely follow TS.
2020-09-23 14:59:38 +01:00
Andre Puschmann
1afc137032
[REBASE] Make PHY non-blocking and fefactor HO procedure ( #1753 )
...
* Make PHY non-blocking and fefactor HO procedure
* makes entire PHY non-blocking through command interface
* adds dedicated queue for cell_search/cell_select commands
* refactor HO procedure to run faster, in one stack cycle. Looks closer to the specs
* force ue to always apply SIB2 configuration during reestablishment
* Run update_measurements in all workers
Co-authored-by: Ismael Gomez <ismagom@gmail.com>
2020-09-22 21:47:16 +02:00
Francisco Paisana
7f8af023b8
added a callback that always gets triggered when the phy cell selection completes. This callback checks if cell selection failed, and if so, sets the rsrp of the selected cell to -infinity
2020-09-22 17:09:18 +01:00
Andre Puschmann
b616944a13
ue,rrc: fix security config during HO/reestablishment
...
we fix a number of very related issues for HO/reestablishment
in the success/error case:
* this patch removes the hard-coded check that intra-cell HO aren't
allowed. There are cases where eNBs use this method to update
the security context.
* the patch also fixes an issue after failed HO where the security context
of the source eNB should be used for the reestablishment.
* update security keys according to specs when mobilitycontrol
indicated change of key
2020-09-21 09:27:07 +02:00
Andre Puschmann
6827c2df21
rrc_meas: disable layer3 filtering until quantity config is received
...
the filter alpha was initialized to zero by default which causes an
issue because the first measurement for a cell can't be updated,
because the filtering function will always return the current value.
According to 36.331 Sec 5.5.3.2 Note 2, a k-value of 0 should turn
off filtering, which should be used as the default value until
an update is received from the network.
2020-09-21 09:27:07 +02:00
Ismael Gomez
f49fbd6d02
Fix the order of HO/reest measurement actions ( #1696 )
2020-09-04 12:18:12 +02:00
Ismael Gomez
06a5bdaab2
Process all calls to RLF in the main RRC task
2020-09-01 11:03:02 +02:00
Francisco Paisana
92221eb780
update of rrc_interface_mac to remove signal from mac to rrc that RA failed in case of handover failure
2020-08-29 20:06:08 +01:00
Francisco Paisana
fddcc3d8ea
In the case of Handover, postpone the activation of the CQI and SR config present in the HO command for after the RA proc completion to the target eNB
2020-08-28 10:14:23 +01:00
Francisco Paisana
5242f9422b
fix deadlock in handover
2020-08-27 13:43:18 +01:00
Francisco Paisana
834c0b3929
integrated new observer pattern into phy controller fsm
2020-08-24 22:10:32 +01:00
Francisco Paisana
48dd436d86
integrated observer pattern into rrc phy ctrl fsm
2020-08-24 22:10:32 +01:00
Francisco Paisana
b1670c005b
remove shadowed variables for reestablishment during handover
2020-08-24 17:48:50 +01:00
Francisco Paisana
8d10aa906e
move defer_task to switch case in the rrc
2020-08-17 22:49:40 +01:00
Francisco Paisana
4fb8011a6d
updated phy controller to use task scheduler
2020-07-14 13:33:50 +01:00
Francisco Paisana
9c5471b094
more ergonomic event callback
2020-07-14 13:33:50 +01:00
Francisco Paisana
58a9610efa
use of stack event loop to propagate cell search and selection results
2020-07-14 13:33:50 +01:00
Francisco Paisana
d48a45976e
moved cell selection/search complete event signalling out of phy_controller
2020-07-14 13:33:50 +01:00
Francisco Paisana
48138b5281
removal of phy cell selection procedure as it now it is replaced by phy controller
2020-07-14 13:33:50 +01:00
Francisco Paisana
489969722e
implemented phy controller FSM to perform cell selection & search. The controller also tracks the phy sync state
2020-07-14 13:33:50 +01:00
Francisco Paisana
5e06430455
removal of stack handler interface
2020-07-13 11:19:25 +01:00
Francisco Paisana
8c920837d6
fix issue when adding neighbour cell that matches serving cell
2020-07-08 00:19:18 +01:00