##################################################################### # srsEPC configuration file ##################################################################### ##################################################################### # MME configuration # # mme_code: 8-bit MME code identifies the MME within a group. # mme_group: 16-bit MME group identifier. # tac: 16-bit Tracking Area Code. # mcc: Mobile Country Code # mnc: Mobile Network Code # full_net_name Display Name of the Network # short_net_name Short Display Name of the Network # apn: Set Access Point Name (APN) # mme_bind_addr: IP bind addr to listen for eNB S1-MME connnections # dns_addr: DNS server address for the UEs # encryption_algo: Preferred encryption algorithm for NAS layer # (supported: EEA0 (default), EEA1, EEA2, EEA3) # integrity_algo: Preferred integrity protection algorithm for NAS # (supported: EIA0 (rejected by most UEs), EIA1 (default), EIA2, EIA3 # paging_timer: Value of paging timer in seconds (T3413) # request_imeisv: Request UE's IMEI-SV in security mode command # ##################################################################### [mme] mme_code = 0x1a mme_group = 0x0001 tac = 0x0007 mcc = 001 mnc = 01 mme_bind_addr = 127.0.1.100 apn = srsapn dns_addr = 8.8.8.8 encryption_algo = EEA0 integrity_algo = EIA1 paging_timer = 2 request_imeisv = false ##################################################################### # HSS configuration # # db_file: Location of .csv file that stores UEs information. # ##################################################################### [hss] db_file = user_db.csv ##################################################################### # SP-GW configuration # # gtpu_bind_addr: GTP-U bind address. # sgi_if_addr: SGi TUN interface IP address. # sgi_if_name: SGi TUN interface name. # max_paging_queue: Maximum packets in paging queue (per UE). # ##################################################################### [spgw] gtpu_bind_addr = 127.0.1.100 sgi_if_addr = 172.16.0.1 sgi_if_name = srs_spgw_sgi max_paging_queue = 100 #################################################################### # PCAP configuration # # Packets are captured to file in the compact format decoded by # the Wireshark s1ap dissector and with DLT 150. # To use the dissector, edit the preferences for DLT_USER to # add an entry with DLT=150, Payload Protocol=s1ap. # # enable: Enable or disable the PCAP. # filename: File name where to save the PCAP. # #################################################################### [pcap] enable = false filename = /tmp/epc.pcap #################################################################### # Log configuration # # Log levels can be set for individual layers. "all_level" sets log # level for all layers unless otherwise configured. # Format: e.g. s1ap_level = info # # In the same way, packet hex dumps can be limited for each level. # "all_hex_limit" sets the hex limit for all layers unless otherwise # configured. # Format: e.g. s1ap_hex_limit = 32 # # Logging layers: nas, s1ap, mme_gtpc, spgw_gtpc, gtpu, spgw, hss, all # Logging levels: debug, info, warning, error, none # # filename: File path to use for log output. Can be set to stdout # to print logs to standard output ##################################################################### [log] all_level = info all_hex_limit = 32 filename = /tmp/epc.log #nas_level = debug #s1ap_level = debug #mme_gtpc_level = debug #spgw_gtpc_level = debug #gtpu_level = debug #spgw_level = debug #hss_level = debug