From 03b9e4ed20e3909b327e3f88cface7ecf0bc2b4a Mon Sep 17 00:00:00 2001 From: Giovanni Di Sirio Date: Sun, 21 Oct 2018 16:44:12 +0000 Subject: [PATCH] More projects updated. git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@12381 110e8d01-0319-4d1e-a829-52ad28d1bb01 --- demos/STM32/RT-STM32F100-DISCOVERY/Makefile | 113 ++- .../RT-STM32F100-DISCOVERY/{ => cfg}/chconf.h | 0 .../{ => cfg}/halconf.h | 0 .../{ => cfg}/mcuconf.h | 0 demos/STM32/RT-STM32F103-MAPLEMINI/Makefile | 121 ++- .../RT-STM32F103-MAPLEMINI/{ => cfg}/chconf.h | 0 .../{ => cfg}/halconf.h | 0 .../{ => cfg}/mcuconf.h | 0 .../{ => source}/usbcfg.c | 0 .../{ => source}/usbcfg.h | 0 .../Makefile | 113 ++- .../{ => cfg}/chconf.h | 0 .../{ => cfg}/ffconf.h | 0 .../{ => cfg}/halconf.h | 0 .../{ => cfg}/mcuconf.h | 0 .../RT-STM32F103-OLIMEX_STM32_P103/Makefile | 113 ++- .../{ => cfg}/chconf.h | 0 .../{ => cfg}/halconf.h | 0 .../{ => cfg}/mcuconf.h | 0 .../Makefile | 115 ++- .../{ => cfg}/chconf.h | 0 .../{ => cfg}/ffconf.h | 0 .../{ => cfg}/halconf.h | 0 .../{ => cfg}/mcuconf.h | 0 .../{ => source}/usbcfg.c | 0 .../{ => source}/usbcfg.h | 0 demos/STM32/RT-STM32F103RB-NUCLEO64/Makefile | 113 ++- .../{ => cfg}/chconf.h | 0 .../{ => cfg}/halconf.h | 0 .../{ => cfg}/mcuconf.h | 0 .../RT-STM32F103_INEMO_DISCOVERY/.cproject | 55 -- .../RT-STM32F103_INEMO_DISCOVERY/.project | 43 -- .../RT-STM32F103_INEMO_DISCOVERY/Makefile | 224 ------ .../RT-STM32F103_INEMO_DISCOVERY/chconf.h | 714 ------------------ ..._DISCOVERY (OpenOCD, Flash and Run).launch | 52 -- .../RT-STM32F103_INEMO_DISCOVERY/halconf.h | 532 ------------- .../STM32/RT-STM32F103_INEMO_DISCOVERY/main.c | 158 ---- .../RT-STM32F103_INEMO_DISCOVERY/mcuconf.h | 214 ------ .../RT-STM32F103_INEMO_DISCOVERY/readme.txt | 27 - .../RT-STM32F103_INEMO_DISCOVERY/usbcfg.c | 342 --------- .../RT-STM32F103_INEMO_DISCOVERY/usbcfg.h | 26 - .../RT-STM32F107-OLIMEX_P107-LWIP/Makefile | 118 ++- 42 files changed, 310 insertions(+), 2883 deletions(-) rename demos/STM32/RT-STM32F100-DISCOVERY/{ => cfg}/chconf.h (100%) rename demos/STM32/RT-STM32F100-DISCOVERY/{ => cfg}/halconf.h (100%) rename demos/STM32/RT-STM32F100-DISCOVERY/{ => cfg}/mcuconf.h (100%) rename demos/STM32/RT-STM32F103-MAPLEMINI/{ => cfg}/chconf.h (100%) rename demos/STM32/RT-STM32F103-MAPLEMINI/{ => cfg}/halconf.h (100%) rename demos/STM32/RT-STM32F103-MAPLEMINI/{ => cfg}/mcuconf.h (100%) rename demos/STM32/RT-STM32F103-MAPLEMINI/{ => source}/usbcfg.c (100%) rename demos/STM32/RT-STM32F103-MAPLEMINI/{ => source}/usbcfg.h (100%) rename demos/STM32/RT-STM32F103-OLIMEX_STM32_P103-FATFS/{ => cfg}/chconf.h (100%) rename demos/STM32/RT-STM32F103-OLIMEX_STM32_P103-FATFS/{ => cfg}/ffconf.h (100%) rename demos/STM32/RT-STM32F103-OLIMEX_STM32_P103-FATFS/{ => cfg}/halconf.h (100%) rename demos/STM32/RT-STM32F103-OLIMEX_STM32_P103-FATFS/{ => cfg}/mcuconf.h (100%) rename demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/{ => cfg}/chconf.h (100%) rename demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/{ => cfg}/halconf.h (100%) rename demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/{ => cfg}/mcuconf.h (100%) rename demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/{ => cfg}/chconf.h (100%) rename demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/{ => cfg}/ffconf.h (100%) rename demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/{ => cfg}/halconf.h (100%) rename demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/{ => cfg}/mcuconf.h (100%) rename demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/{ => source}/usbcfg.c (100%) rename demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/{ => source}/usbcfg.h (100%) rename demos/STM32/RT-STM32F103RB-NUCLEO64/{ => cfg}/chconf.h (100%) rename demos/STM32/RT-STM32F103RB-NUCLEO64/{ => cfg}/halconf.h (100%) rename demos/STM32/RT-STM32F103RB-NUCLEO64/{ => cfg}/mcuconf.h (100%) delete mode 100644 demos/STM32/RT-STM32F103_INEMO_DISCOVERY/.cproject delete mode 100644 demos/STM32/RT-STM32F103_INEMO_DISCOVERY/.project delete mode 100644 demos/STM32/RT-STM32F103_INEMO_DISCOVERY/Makefile delete mode 100644 demos/STM32/RT-STM32F103_INEMO_DISCOVERY/chconf.h delete mode 100644 demos/STM32/RT-STM32F103_INEMO_DISCOVERY/debug/RT-STM32F103_INEMO_DISCOVERY (OpenOCD, Flash and Run).launch delete mode 100644 demos/STM32/RT-STM32F103_INEMO_DISCOVERY/halconf.h delete mode 100644 demos/STM32/RT-STM32F103_INEMO_DISCOVERY/main.c delete mode 100644 demos/STM32/RT-STM32F103_INEMO_DISCOVERY/mcuconf.h delete mode 100644 demos/STM32/RT-STM32F103_INEMO_DISCOVERY/readme.txt delete mode 100644 demos/STM32/RT-STM32F103_INEMO_DISCOVERY/usbcfg.c delete mode 100644 demos/STM32/RT-STM32F103_INEMO_DISCOVERY/usbcfg.h diff --git a/demos/STM32/RT-STM32F100-DISCOVERY/Makefile b/demos/STM32/RT-STM32F100-DISCOVERY/Makefile index 95a1cf742..6fd983d11 100644 --- a/demos/STM32/RT-STM32F100-DISCOVERY/Makefile +++ b/demos/STM32/RT-STM32F100-DISCOVERY/Makefile @@ -18,7 +18,7 @@ ifeq ($(USE_CPPOPT),) USE_CPPOPT = -fno-rtti endif -# Enable this if you want the linker to remove unused code and data +# Enable this if you want the linker to remove unused code and data. ifeq ($(USE_LINK_GC),) USE_LINK_GC = yes endif @@ -28,16 +28,11 @@ ifeq ($(USE_LDOPT),) USE_LDOPT = endif -# Enable this if you want link time optimizations (LTO) +# Enable this if you want link time optimizations (LTO). ifeq ($(USE_LTO),) USE_LTO = yes endif -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - # Enable this if you want to see the full log while compiling. ifeq ($(USE_VERBOSE_COMPILE),) USE_VERBOSE_COMPILE = no @@ -74,19 +69,30 @@ ifeq ($(USE_FPU),) USE_FPU = no endif +# FPU-related options. +ifeq ($(USE_FPU_OPT),) + USE_FPU_OPT = -mfloat-abi=$(USE_FPU) -mfpu=fpv4-sp-d16 +endif + # # Architecture or project specific options ############################################################################## ############################################################################## -# Project, sources and paths +# Project, target, sources and paths # # Define project name here PROJECT = ch -# Imported source files and paths -CHIBIOS = ../../.. +# Target settings. +MCU = cortex-m3 + +# Imported source files and paths. +CHIBIOS := ../../.. +CONFDIR := ./cfg +BUILDDIR := ./build +DEPDIR := ./.dep # Licensing files. include $(CHIBIOS)/os/license/license.mk @@ -100,6 +106,8 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk # RTOS files (optional). include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk +# Auto-build files in ./source recursively. +include $(CHIBIOS)/tools/mk/autobuild.mk # Other files (optional). include $(CHIBIOS)/test/lib/test.mk include $(CHIBIOS)/test/rt/rt_test.mk @@ -118,73 +126,23 @@ CSRC = $(ALLCSRC) \ # setting. CPPSRC = $(ALLCPPSRC) -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here +# List ASM source files here. ASMSRC = $(ALLASMSRC) + +# List ASM with preprocessor source files here. ASMXSRC = $(ALLXASMSRC) -INCDIR = $(ALLINC) $(TESTINC) +# Inclusion directories. +INCDIR = $(CONFDIR) $(ALLINC) $(TESTINC) -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here +# Define C warning options here. CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes -# Define C++ warning options here +# Define C++ warning options here. CPPWARN = -Wall -Wextra -Wundef # -# Compiler settings +# Project, target, sources and paths ############################################################################## ############################################################################## @@ -207,8 +165,25 @@ ULIBDIR = ULIBS = # -# End of user defines +# End of user section ############################################################################## +############################################################################## +# Common rules +# + RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk +include $(RULESPATH)/arm-none-eabi.mk include $(RULESPATH)/rules.mk + +# +# Common rules +############################################################################## + +############################################################################## +# Custom rules +# + +# +# Custom rules +############################################################################## diff --git a/demos/STM32/RT-STM32F100-DISCOVERY/chconf.h b/demos/STM32/RT-STM32F100-DISCOVERY/cfg/chconf.h similarity index 100% rename from demos/STM32/RT-STM32F100-DISCOVERY/chconf.h rename to demos/STM32/RT-STM32F100-DISCOVERY/cfg/chconf.h diff --git a/demos/STM32/RT-STM32F100-DISCOVERY/halconf.h b/demos/STM32/RT-STM32F100-DISCOVERY/cfg/halconf.h similarity index 100% rename from demos/STM32/RT-STM32F100-DISCOVERY/halconf.h rename to demos/STM32/RT-STM32F100-DISCOVERY/cfg/halconf.h diff --git a/demos/STM32/RT-STM32F100-DISCOVERY/mcuconf.h b/demos/STM32/RT-STM32F100-DISCOVERY/cfg/mcuconf.h similarity index 100% rename from demos/STM32/RT-STM32F100-DISCOVERY/mcuconf.h rename to demos/STM32/RT-STM32F100-DISCOVERY/cfg/mcuconf.h diff --git a/demos/STM32/RT-STM32F103-MAPLEMINI/Makefile b/demos/STM32/RT-STM32F103-MAPLEMINI/Makefile index b8467b941..3743f0549 100644 --- a/demos/STM32/RT-STM32F103-MAPLEMINI/Makefile +++ b/demos/STM32/RT-STM32F103-MAPLEMINI/Makefile @@ -3,9 +3,6 @@ # NOTE: Can be overridden externally. # -# En/disable usage of maplemini bootloader support -USE_MAPLEMINI_BOOTLOADER ?= 1 - # Compiler options here. ifeq ($(USE_OPT),) USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -DUSE_MAPLEMINI_BOOTLOADER=${USE_MAPLEMINI_BOOTLOADER} @@ -21,7 +18,7 @@ ifeq ($(USE_CPPOPT),) USE_CPPOPT = -fno-rtti endif -# Enable this if you want the linker to remove unused code and data +# Enable this if you want the linker to remove unused code and data. ifeq ($(USE_LINK_GC),) USE_LINK_GC = yes endif @@ -31,16 +28,11 @@ ifeq ($(USE_LDOPT),) USE_LDOPT = endif -# Enable this if you want link time optimizations (LTO) +# Enable this if you want link time optimizations (LTO). ifeq ($(USE_LTO),) USE_LTO = yes endif -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - # Enable this if you want to see the full log while compiling. ifeq ($(USE_VERBOSE_COMPILE),) USE_VERBOSE_COMPILE = no @@ -77,19 +69,30 @@ ifeq ($(USE_FPU),) USE_FPU = no endif +# FPU-related options. +ifeq ($(USE_FPU_OPT),) + USE_FPU_OPT = -mfloat-abi=$(USE_FPU) -mfpu=fpv4-sp-d16 +endif + # # Architecture or project specific options ############################################################################## ############################################################################## -# Project, sources and paths +# Project, target, sources and paths # # Define project name here PROJECT = ch -# Imported source files and paths -CHIBIOS = ../../.. +# Target settings. +MCU = cortex-m3 + +# Imported source files and paths. +CHIBIOS := ../../.. +CONFDIR := ./cfg +BUILDDIR := ./build +DEPDIR := ./.dep # Licensing files. include $(CHIBIOS)/os/license/license.mk @@ -103,6 +106,8 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk # RTOS files (optional). include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk +# Auto-build files in ./source recursively. +include $(CHIBIOS)/tools/mk/autobuild.mk # Other files (optional). include $(CHIBIOS)/test/lib/test.mk include $(CHIBIOS)/test/rt/rt_test.mk @@ -121,79 +126,29 @@ endif # setting. CSRC = $(ALLCSRC) \ $(TESTSRC) \ - usbcfg.c main.c + main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. CPPSRC = $(ALLCPPSRC) -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here +# List ASM source files here. ASMSRC = $(ALLASMSRC) + +# List ASM with preprocessor source files here. ASMXSRC = $(ALLXASMSRC) -INCDIR = $(ALLINC) $(TESTINC) +# Inclusion directories. +INCDIR = $(CONFDIR) $(ALLINC) $(TESTINC) -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here +# Define C warning options here. CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes -# Define C++ warning options here +# Define C++ warning options here. CPPWARN = -Wall -Wextra -Wundef # -# Compiler settings +# Project, target, sources and paths ############################################################################## ############################################################################## @@ -202,9 +157,6 @@ CPPWARN = -Wall -Wextra -Wundef # List all user C define here, like -D_DEBUG=1 UDEFS = -ifeq ($(USE_MAPLEMINI_BOOTLOADER),1) - UDEFS += -DCORTEX_VTOR_INIT=0x5000 -endif # Define ASM defines here UADEFS = @@ -219,8 +171,25 @@ ULIBDIR = ULIBS = # -# End of user defines +# End of user section ############################################################################## +############################################################################## +# Common rules +# + RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk +include $(RULESPATH)/arm-none-eabi.mk include $(RULESPATH)/rules.mk + +# +# Common rules +############################################################################## + +############################################################################## +# Custom rules +# + +# +# Custom rules +############################################################################## diff --git a/demos/STM32/RT-STM32F103-MAPLEMINI/chconf.h b/demos/STM32/RT-STM32F103-MAPLEMINI/cfg/chconf.h similarity index 100% rename from demos/STM32/RT-STM32F103-MAPLEMINI/chconf.h rename to demos/STM32/RT-STM32F103-MAPLEMINI/cfg/chconf.h diff --git a/demos/STM32/RT-STM32F103-MAPLEMINI/halconf.h b/demos/STM32/RT-STM32F103-MAPLEMINI/cfg/halconf.h similarity index 100% rename from demos/STM32/RT-STM32F103-MAPLEMINI/halconf.h rename to demos/STM32/RT-STM32F103-MAPLEMINI/cfg/halconf.h diff --git a/demos/STM32/RT-STM32F103-MAPLEMINI/mcuconf.h b/demos/STM32/RT-STM32F103-MAPLEMINI/cfg/mcuconf.h similarity index 100% rename from demos/STM32/RT-STM32F103-MAPLEMINI/mcuconf.h rename to demos/STM32/RT-STM32F103-MAPLEMINI/cfg/mcuconf.h diff --git a/demos/STM32/RT-STM32F103-MAPLEMINI/usbcfg.c b/demos/STM32/RT-STM32F103-MAPLEMINI/source/usbcfg.c similarity index 100% rename from demos/STM32/RT-STM32F103-MAPLEMINI/usbcfg.c rename to demos/STM32/RT-STM32F103-MAPLEMINI/source/usbcfg.c diff --git a/demos/STM32/RT-STM32F103-MAPLEMINI/usbcfg.h b/demos/STM32/RT-STM32F103-MAPLEMINI/source/usbcfg.h similarity index 100% rename from demos/STM32/RT-STM32F103-MAPLEMINI/usbcfg.h rename to demos/STM32/RT-STM32F103-MAPLEMINI/source/usbcfg.h diff --git a/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103-FATFS/Makefile b/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103-FATFS/Makefile index 2acbee8d5..52b3cf1d1 100755 --- a/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103-FATFS/Makefile +++ b/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103-FATFS/Makefile @@ -18,7 +18,7 @@ ifeq ($(USE_CPPOPT),) USE_CPPOPT = -fno-rtti endif -# Enable this if you want the linker to remove unused code and data +# Enable this if you want the linker to remove unused code and data. ifeq ($(USE_LINK_GC),) USE_LINK_GC = yes endif @@ -28,16 +28,11 @@ ifeq ($(USE_LDOPT),) USE_LDOPT = endif -# Enable this if you want link time optimizations (LTO) +# Enable this if you want link time optimizations (LTO). ifeq ($(USE_LTO),) USE_LTO = yes endif -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - # Enable this if you want to see the full log while compiling. ifeq ($(USE_VERBOSE_COMPILE),) USE_VERBOSE_COMPILE = no @@ -74,19 +69,30 @@ ifeq ($(USE_FPU),) USE_FPU = no endif +# FPU-related options. +ifeq ($(USE_FPU_OPT),) + USE_FPU_OPT = -mfloat-abi=$(USE_FPU) -mfpu=fpv4-sp-d16 +endif + # # Architecture or project specific options ############################################################################## ############################################################################## -# Project, sources and paths +# Project, target, sources and paths # # Define project name here PROJECT = ch -# Imported source files and paths -CHIBIOS = ../../.. +# Target settings. +MCU = cortex-m3 + +# Imported source files and paths. +CHIBIOS := ../../.. +CONFDIR := ./cfg +BUILDDIR := ./build +DEPDIR := ./.dep # Licensing files. include $(CHIBIOS)/os/license/license.mk @@ -100,6 +106,8 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk # RTOS files (optional). include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk +# Auto-build files in ./source recursively. +include $(CHIBIOS)/tools/mk/autobuild.mk # Other files (optional). include $(CHIBIOS)/test/lib/test.mk include $(CHIBIOS)/test/rt/rt_test.mk @@ -121,73 +129,23 @@ CSRC = $(ALLCSRC) \ # setting. CPPSRC = $(ALLCPPSRC) -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here +# List ASM source files here. ASMSRC = $(ALLASMSRC) + +# List ASM with preprocessor source files here. ASMXSRC = $(ALLXASMSRC) -INCDIR = $(ALLINC) $(TESTINC) +# Inclusion directories. +INCDIR = $(CONFDIR) $(ALLINC) $(TESTINC) -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here +# Define C warning options here. CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes -# Define C++ warning options here +# Define C++ warning options here. CPPWARN = -Wall -Wextra -Wundef # -# Compiler settings +# Project, target, sources and paths ############################################################################## ############################################################################## @@ -210,8 +168,25 @@ ULIBDIR = ULIBS = # -# End of user defines +# End of user section ############################################################################## +############################################################################## +# Common rules +# + RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk +include $(RULESPATH)/arm-none-eabi.mk include $(RULESPATH)/rules.mk + +# +# Common rules +############################################################################## + +############################################################################## +# Custom rules +# + +# +# Custom rules +############################################################################## diff --git a/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103-FATFS/chconf.h b/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103-FATFS/cfg/chconf.h similarity index 100% rename from demos/STM32/RT-STM32F103-OLIMEX_STM32_P103-FATFS/chconf.h rename to demos/STM32/RT-STM32F103-OLIMEX_STM32_P103-FATFS/cfg/chconf.h diff --git a/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103-FATFS/ffconf.h b/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103-FATFS/cfg/ffconf.h similarity index 100% rename from demos/STM32/RT-STM32F103-OLIMEX_STM32_P103-FATFS/ffconf.h rename to demos/STM32/RT-STM32F103-OLIMEX_STM32_P103-FATFS/cfg/ffconf.h diff --git a/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103-FATFS/halconf.h b/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103-FATFS/cfg/halconf.h similarity index 100% rename from demos/STM32/RT-STM32F103-OLIMEX_STM32_P103-FATFS/halconf.h rename to demos/STM32/RT-STM32F103-OLIMEX_STM32_P103-FATFS/cfg/halconf.h diff --git a/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103-FATFS/mcuconf.h b/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103-FATFS/cfg/mcuconf.h similarity index 100% rename from demos/STM32/RT-STM32F103-OLIMEX_STM32_P103-FATFS/mcuconf.h rename to demos/STM32/RT-STM32F103-OLIMEX_STM32_P103-FATFS/cfg/mcuconf.h diff --git a/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/Makefile b/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/Makefile index 4bd7af4e6..d7e341a62 100644 --- a/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/Makefile +++ b/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/Makefile @@ -18,7 +18,7 @@ ifeq ($(USE_CPPOPT),) USE_CPPOPT = -fno-rtti endif -# Enable this if you want the linker to remove unused code and data +# Enable this if you want the linker to remove unused code and data. ifeq ($(USE_LINK_GC),) USE_LINK_GC = yes endif @@ -28,16 +28,11 @@ ifeq ($(USE_LDOPT),) USE_LDOPT = endif -# Enable this if you want link time optimizations (LTO) +# Enable this if you want link time optimizations (LTO). ifeq ($(USE_LTO),) USE_LTO = yes endif -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - # Enable this if you want to see the full log while compiling. ifeq ($(USE_VERBOSE_COMPILE),) USE_VERBOSE_COMPILE = no @@ -74,19 +69,30 @@ ifeq ($(USE_FPU),) USE_FPU = no endif +# FPU-related options. +ifeq ($(USE_FPU_OPT),) + USE_FPU_OPT = -mfloat-abi=$(USE_FPU) -mfpu=fpv4-sp-d16 +endif + # # Architecture or project specific options ############################################################################## ############################################################################## -# Project, sources and paths +# Project, target, sources and paths # # Define project name here PROJECT = ch -# Imported source files and paths -CHIBIOS = ../../.. +# Target settings. +MCU = cortex-m3 + +# Imported source files and paths. +CHIBIOS := ../../.. +CONFDIR := ./cfg +BUILDDIR := ./build +DEPDIR := ./.dep # Licensing files. include $(CHIBIOS)/os/license/license.mk @@ -100,6 +106,8 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk # RTOS files (optional). include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk +# Auto-build files in ./source recursively. +include $(CHIBIOS)/tools/mk/autobuild.mk # Other files (optional). include $(CHIBIOS)/test/lib/test.mk include $(CHIBIOS)/test/rt/rt_test.mk @@ -118,73 +126,23 @@ CSRC = $(ALLCSRC) \ # setting. CPPSRC = $(ALLCPPSRC) -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here +# List ASM source files here. ASMSRC = $(ALLASMSRC) + +# List ASM with preprocessor source files here. ASMXSRC = $(ALLXASMSRC) -INCDIR = $(ALLINC) $(TESTINC) +# Inclusion directories. +INCDIR = $(CONFDIR) $(ALLINC) $(TESTINC) -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here +# Define C warning options here. CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes -# Define C++ warning options here +# Define C++ warning options here. CPPWARN = -Wall -Wextra -Wundef # -# Compiler settings +# Project, target, sources and paths ############################################################################## ############################################################################## @@ -207,8 +165,25 @@ ULIBDIR = ULIBS = # -# End of user defines +# End of user section ############################################################################## +############################################################################## +# Common rules +# + RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk +include $(RULESPATH)/arm-none-eabi.mk include $(RULESPATH)/rules.mk + +# +# Common rules +############################################################################## + +############################################################################## +# Custom rules +# + +# +# Custom rules +############################################################################## diff --git a/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/chconf.h b/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/cfg/chconf.h similarity index 100% rename from demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/chconf.h rename to demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/cfg/chconf.h diff --git a/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/halconf.h b/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/cfg/halconf.h similarity index 100% rename from demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/halconf.h rename to demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/cfg/halconf.h diff --git a/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/mcuconf.h b/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/cfg/mcuconf.h similarity index 100% rename from demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/mcuconf.h rename to demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/cfg/mcuconf.h diff --git a/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/Makefile b/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/Makefile index dfab1e962..59c6a7efe 100644 --- a/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/Makefile +++ b/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/Makefile @@ -18,7 +18,7 @@ ifeq ($(USE_CPPOPT),) USE_CPPOPT = -fno-rtti endif -# Enable this if you want the linker to remove unused code and data +# Enable this if you want the linker to remove unused code and data. ifeq ($(USE_LINK_GC),) USE_LINK_GC = yes endif @@ -28,16 +28,11 @@ ifeq ($(USE_LDOPT),) USE_LDOPT = endif -# Enable this if you want link time optimizations (LTO) +# Enable this if you want link time optimizations (LTO). ifeq ($(USE_LTO),) USE_LTO = yes endif -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - # Enable this if you want to see the full log while compiling. ifeq ($(USE_VERBOSE_COMPILE),) USE_VERBOSE_COMPILE = no @@ -74,19 +69,30 @@ ifeq ($(USE_FPU),) USE_FPU = no endif +# FPU-related options. +ifeq ($(USE_FPU_OPT),) + USE_FPU_OPT = -mfloat-abi=$(USE_FPU) -mfpu=fpv4-sp-d16 +endif + # # Architecture or project specific options ############################################################################## ############################################################################## -# Project, sources and paths +# Project, target, sources and paths # # Define project name here PROJECT = ch -# Imported source files and paths -CHIBIOS = ../../.. +# Target settings. +MCU = cortex-m3 + +# Imported source files and paths. +CHIBIOS := ../../.. +CONFDIR := ./cfg +BUILDDIR := ./build +DEPDIR := ./.dep # Licensing files. include $(CHIBIOS)/os/license/license.mk @@ -100,6 +106,8 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk # RTOS files (optional). include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk +# Auto-build files in ./source recursively. +include $(CHIBIOS)/tools/mk/autobuild.mk # Other files (optional). include $(CHIBIOS)/test/lib/test.mk include $(CHIBIOS)/test/rt/rt_test.mk @@ -115,79 +123,29 @@ LDSCRIPT= $(STARTUPLD)/STM32F103xG.ld # setting. CSRC = $(ALLCSRC) \ $(TESTSRC) \ - usbcfg.c main.c + main.c # C++ sources that can be compiled in ARM or THUMB mode depending on the global # setting. CPPSRC = $(ALLCPPSRC) -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here +# List ASM source files here. ASMSRC = $(ALLASMSRC) + +# List ASM with preprocessor source files here. ASMXSRC = $(ALLXASMSRC) -INCDIR = $(ALLINC) $(TESTINC) +# Inclusion directories. +INCDIR = $(CONFDIR) $(ALLINC) $(TESTINC) -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here +# Define C warning options here. CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes -# Define C++ warning options here +# Define C++ warning options here. CPPWARN = -Wall -Wextra -Wundef # -# Compiler settings +# Project, target, sources and paths ############################################################################## ############################################################################## @@ -210,8 +168,25 @@ ULIBDIR = ULIBS = # -# End of user defines +# End of user section ############################################################################## +############################################################################## +# Common rules +# + RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk +include $(RULESPATH)/arm-none-eabi.mk include $(RULESPATH)/rules.mk + +# +# Common rules +############################################################################## + +############################################################################## +# Custom rules +# + +# +# Custom rules +############################################################################## diff --git a/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/chconf.h b/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/cfg/chconf.h similarity index 100% rename from demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/chconf.h rename to demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/cfg/chconf.h diff --git a/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/ffconf.h b/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/cfg/ffconf.h similarity index 100% rename from demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/ffconf.h rename to demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/cfg/ffconf.h diff --git a/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/halconf.h b/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/cfg/halconf.h similarity index 100% rename from demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/halconf.h rename to demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/cfg/halconf.h diff --git a/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/mcuconf.h b/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/cfg/mcuconf.h similarity index 100% rename from demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/mcuconf.h rename to demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/cfg/mcuconf.h diff --git a/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/usbcfg.c b/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/source/usbcfg.c similarity index 100% rename from demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/usbcfg.c rename to demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/source/usbcfg.c diff --git a/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/usbcfg.h b/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/source/usbcfg.h similarity index 100% rename from demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/usbcfg.h rename to demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/source/usbcfg.h diff --git a/demos/STM32/RT-STM32F103RB-NUCLEO64/Makefile b/demos/STM32/RT-STM32F103RB-NUCLEO64/Makefile index c0fef3a03..76eb6fb18 100644 --- a/demos/STM32/RT-STM32F103RB-NUCLEO64/Makefile +++ b/demos/STM32/RT-STM32F103RB-NUCLEO64/Makefile @@ -18,7 +18,7 @@ ifeq ($(USE_CPPOPT),) USE_CPPOPT = -fno-rtti endif -# Enable this if you want the linker to remove unused code and data +# Enable this if you want the linker to remove unused code and data. ifeq ($(USE_LINK_GC),) USE_LINK_GC = yes endif @@ -28,16 +28,11 @@ ifeq ($(USE_LDOPT),) USE_LDOPT = endif -# Enable this if you want link time optimizations (LTO) +# Enable this if you want link time optimizations (LTO). ifeq ($(USE_LTO),) USE_LTO = yes endif -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - # Enable this if you want to see the full log while compiling. ifeq ($(USE_VERBOSE_COMPILE),) USE_VERBOSE_COMPILE = no @@ -74,19 +69,30 @@ ifeq ($(USE_FPU),) USE_FPU = no endif +# FPU-related options. +ifeq ($(USE_FPU_OPT),) + USE_FPU_OPT = -mfloat-abi=$(USE_FPU) -mfpu=fpv4-sp-d16 +endif + # # Architecture or project specific options ############################################################################## ############################################################################## -# Project, sources and paths +# Project, target, sources and paths # # Define project name here PROJECT = ch -# Imported source files and paths -CHIBIOS = ../../.. +# Target settings. +MCU = cortex-m3 + +# Imported source files and paths. +CHIBIOS := ../../.. +CONFDIR := ./cfg +BUILDDIR := ./build +DEPDIR := ./.dep # Licensing files. include $(CHIBIOS)/os/license/license.mk @@ -100,6 +106,8 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk # RTOS files (optional). include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk +# Auto-build files in ./source recursively. +include $(CHIBIOS)/tools/mk/autobuild.mk # Other files (optional). include $(CHIBIOS)/test/lib/test.mk include $(CHIBIOS)/test/rt/rt_test.mk @@ -118,73 +126,23 @@ CSRC = $(ALLCSRC) \ # setting. CPPSRC = $(ALLCPPSRC) -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here +# List ASM source files here. ASMSRC = $(ALLASMSRC) + +# List ASM with preprocessor source files here. ASMXSRC = $(ALLXASMSRC) -INCDIR = $(ALLINC) $(TESTINC) +# Inclusion directories. +INCDIR = $(CONFDIR) $(ALLINC) $(TESTINC) -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here +# Define C warning options here. CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes -# Define C++ warning options here +# Define C++ warning options here. CPPWARN = -Wall -Wextra -Wundef # -# Compiler settings +# Project, target, sources and paths ############################################################################## ############################################################################## @@ -207,8 +165,25 @@ ULIBDIR = ULIBS = # -# End of user defines +# End of user section ############################################################################## +############################################################################## +# Common rules +# + RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk +include $(RULESPATH)/arm-none-eabi.mk include $(RULESPATH)/rules.mk + +# +# Common rules +############################################################################## + +############################################################################## +# Custom rules +# + +# +# Custom rules +############################################################################## diff --git a/demos/STM32/RT-STM32F103RB-NUCLEO64/chconf.h b/demos/STM32/RT-STM32F103RB-NUCLEO64/cfg/chconf.h similarity index 100% rename from demos/STM32/RT-STM32F103RB-NUCLEO64/chconf.h rename to demos/STM32/RT-STM32F103RB-NUCLEO64/cfg/chconf.h diff --git a/demos/STM32/RT-STM32F103RB-NUCLEO64/halconf.h b/demos/STM32/RT-STM32F103RB-NUCLEO64/cfg/halconf.h similarity index 100% rename from demos/STM32/RT-STM32F103RB-NUCLEO64/halconf.h rename to demos/STM32/RT-STM32F103RB-NUCLEO64/cfg/halconf.h diff --git a/demos/STM32/RT-STM32F103RB-NUCLEO64/mcuconf.h b/demos/STM32/RT-STM32F103RB-NUCLEO64/cfg/mcuconf.h similarity index 100% rename from demos/STM32/RT-STM32F103RB-NUCLEO64/mcuconf.h rename to demos/STM32/RT-STM32F103RB-NUCLEO64/cfg/mcuconf.h diff --git a/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/.cproject b/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/.cproject deleted file mode 100644 index beada35ba..000000000 --- a/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/.cproject +++ /dev/null @@ -1,55 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/.project b/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/.project deleted file mode 100644 index 052c359ba..000000000 --- a/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/.project +++ /dev/null @@ -1,43 +0,0 @@ - - - RT-STM32F103_INEMO_DISCOVERY - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_INEMO_M1_DISCOVERY - - - os - 2 - CHIBIOS/os - - - test - 2 - CHIBIOS/test - - - diff --git a/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/Makefile b/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/Makefile deleted file mode 100644 index 73a5c0785..000000000 --- a/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/Makefile +++ /dev/null @@ -1,224 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -# Startup files. -include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f1xx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F1xx/platform.mk -include $(CHIBIOS)/os/hal/boards/ST_INEMO_M1_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk -include $(CHIBIOS)/os/hal/lib/streams/streams.mk -include $(CHIBIOS)/os/various/shell/shell.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/STM32F103xE.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - $(STREAMSSRC) \ - $(SHELLSRC) \ - usbcfg.c main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(STREAMSINC) $(SHELLINC) - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk -include $(RULESPATH)/rules.mk diff --git a/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/chconf.h b/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/chconf.h deleted file mode 100644 index dcd31d1eb..000000000 --- a/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/chconf.h +++ /dev/null @@ -1,714 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 16 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 2000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM TRUE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/debug/RT-STM32F103_INEMO_DISCOVERY (OpenOCD, Flash and Run).launch b/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/debug/RT-STM32F103_INEMO_DISCOVERY (OpenOCD, Flash and Run).launch deleted file mode 100644 index 28db54120..000000000 --- a/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/debug/RT-STM32F103_INEMO_DISCOVERY (OpenOCD, Flash and Run).launch +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/halconf.h b/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/halconf.h deleted file mode 100644 index 86d17e425..000000000 --- a/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/halconf.h +++ /dev/null @@ -1,532 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_6_0_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB TRUE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/main.c b/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/main.c deleted file mode 100644 index 3bcfb3059..000000000 --- a/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/main.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include -#include - -#include "ch.h" -#include "hal.h" - -#include "shell.h" -#include "chprintf.h" - -#include "usbcfg.h" - -/*===========================================================================*/ -/* Command line related. */ -/*===========================================================================*/ - -#define SHELL_WA_SIZE THD_WORKING_AREA_SIZE(2048) - -/* Can be measured using dd if=/dev/xxxx of=/dev/null bs=512 count=10000.*/ -static void cmd_write(BaseSequentialStream *chp, int argc, char *argv[]) { - static uint8_t buf[] = - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: write\r\n"); - return; - } - - while (chnGetTimeout((BaseChannel *)chp, TIME_IMMEDIATE) == Q_TIMEOUT) { -#if 1 - /* Writing in channel mode.*/ - chnWrite(&SDU1, buf, sizeof buf - 1); -#else - /* Writing in buffer mode.*/ - (void) obqGetEmptyBufferTimeout(&SDU1.obqueue, TIME_INFINITE); - memcpy(SDU1.obqueue.ptr, buf, SERIAL_USB_BUFFERS_SIZE); - obqPostFullBuffer(&SDU1.obqueue, SERIAL_USB_BUFFERS_SIZE); -#endif - } - chprintf(chp, "\r\n\nstopped\r\n"); -} - -static const ShellCommand commands[] = { - {"write", cmd_write}, - {NULL, NULL} -}; - -static const ShellConfig shell_cfg1 = { - (BaseSequentialStream *)&SDU1, - commands -}; - -/*===========================================================================*/ -/* Generic code. */ -/*===========================================================================*/ - -/* - * Red LED blinker thread, times are in milliseconds. - */ -static THD_WORKING_AREA(waThread1, 128); -static THD_FUNCTION(Thread1, arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (true) { - systime_t time = serusbcfg.usbp->state == USB_ACTIVE ? 250 : 500; - palClearPad(GPIOA, GPIOA_LED_BLUE); - chThdSleepMilliseconds(time); - palSetPad(GPIOA, GPIOA_LED_BLUE); - chThdSleepMilliseconds(time); - } -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initializes a serial-over-USB CDC driver. - */ - sduObjectInit(&SDU1); - sduStart(&SDU1, &serusbcfg); - - /* - * Activates the USB driver and then the USB bus pull-up on D+. - * Note, a delay is inserted in order to not have to disconnect the cable - * after a reset. - */ - usbDisconnectBus(serusbcfg.usbp); - chThdSleepMilliseconds(1500); - usbStart(serusbcfg.usbp, &usbcfg); - usbConnectBus(serusbcfg.usbp); - - /* - * Shell manager initialization. - */ - shellInit(); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Normal main() thread activity, spawning shells. - */ - while (true) { - if (SDU1.config->usbp->state == USB_ACTIVE) { - thread_t *shelltp = chThdCreateFromHeap(NULL, SHELL_WA_SIZE, - "shell", NORMALPRIO + 1, - shellThread, (void *)&shell_cfg1); - chThdWait(shelltp); /* Waiting termination. */ - } - chThdSleepMilliseconds(1000); - } -} diff --git a/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/mcuconf.h b/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/mcuconf.h deleted file mode 100644 index a89194897..000000000 --- a/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/mcuconf.h +++ /dev/null @@ -1,214 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * IRQ system settings. - */ -#define STM32_IRQ_EXTI0_PRIORITY 6 -#define STM32_IRQ_EXTI1_PRIORITY 6 -#define STM32_IRQ_EXTI2_PRIORITY 6 -#define STM32_IRQ_EXTI3_PRIORITY 6 -#define STM32_IRQ_EXTI4_PRIORITY 6 -#define STM32_IRQ_EXTI5_9_PRIORITY 6 -#define STM32_IRQ_EXTI10_15_PRIORITY 6 -#define STM32_IRQ_EXTI16_PRIORITY 6 -#define STM32_IRQ_EXTI17_PRIORITY 6 -#define STM32_IRQ_EXTI18_PRIORITY 6 -#define STM32_IRQ_EXTI19_PRIORITY 6 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* MCUCONF_H */ diff --git a/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/readme.txt b/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/readme.txt deleted file mode 100644 index 378f1a673..000000000 --- a/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/readme.txt +++ /dev/null @@ -1,27 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - USB-CDC driver demo for STM32. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STEVAL-MKI121V1 board. - -** The Demo ** - -The application demonstrates the use of the STM32 USB driver on an INEMO-M1 -STEVAL-MKI121V1 board.. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/usbcfg.c b/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/usbcfg.c deleted file mode 100644 index f3e69c237..000000000 --- a/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/usbcfg.c +++ /dev/null @@ -1,342 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" - -/* Virtual serial port over USB.*/ -SerialUSBDriver SDU1; - -/* - * Endpoints to be used for USBD1. - */ -#define USBD1_DATA_REQUEST_EP 1 -#define USBD1_DATA_AVAILABLE_EP 1 -#define USBD1_INTERRUPT_REQUEST_EP 2 - -/* - * USB Device Descriptor. - */ -static const uint8_t vcom_device_descriptor_data[18] = { - USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */ - 0x02, /* bDeviceClass (CDC). */ - 0x00, /* bDeviceSubClass. */ - 0x00, /* bDeviceProtocol. */ - 0x40, /* bMaxPacketSize. */ - 0x0483, /* idVendor (ST). */ - 0x5740, /* idProduct. */ - 0x0200, /* bcdDevice. */ - 1, /* iManufacturer. */ - 2, /* iProduct. */ - 3, /* iSerialNumber. */ - 1) /* bNumConfigurations. */ -}; - -/* - * Device Descriptor wrapper. - */ -static const USBDescriptor vcom_device_descriptor = { - sizeof vcom_device_descriptor_data, - vcom_device_descriptor_data -}; - -/* Configuration Descriptor tree for a CDC.*/ -static const uint8_t vcom_configuration_descriptor_data[67] = { - /* Configuration Descriptor.*/ - USB_DESC_CONFIGURATION(67, /* wTotalLength. */ - 0x02, /* bNumInterfaces. */ - 0x01, /* bConfigurationValue. */ - 0, /* iConfiguration. */ - 0xC0, /* bmAttributes (self powered). */ - 50), /* bMaxPower (100mA). */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x01, /* bNumEndpoints. */ - 0x02, /* bInterfaceClass (Communications - Interface Class, CDC section - 4.2). */ - 0x02, /* bInterfaceSubClass (Abstract - Control Model, CDC section 4.3). */ - 0x01, /* bInterfaceProtocol (AT commands, - CDC section 4.4). */ - 0), /* iInterface. */ - /* Header Functional Descriptor (CDC section 5.2.3).*/ - USB_DESC_BYTE (5), /* bLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header - Functional Descriptor. */ - USB_DESC_BCD (0x0110), /* bcdCDC. */ - /* Call Management Functional Descriptor. */ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */ - USB_DESC_BYTE (0x01), /* bDataInterface. */ - /* ACM Functional Descriptor.*/ - USB_DESC_BYTE (4), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract - Control Management Descriptor). */ - USB_DESC_BYTE (0x02), /* bmCapabilities. */ - /* Union Functional Descriptor.*/ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bMasterInterface (Communication - Class Interface). */ - USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class - Interface). */ - /* Endpoint 2 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_INTERRUPT_REQUEST_EP|0x80, - 0x03, /* bmAttributes (Interrupt). */ - 0x0008, /* wMaxPacketSize. */ - 0xFF), /* bInterval. */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x02, /* bNumEndpoints. */ - 0x0A, /* bInterfaceClass (Data Class - Interface, CDC section 4.5). */ - 0x00, /* bInterfaceSubClass (CDC section - 4.6). */ - 0x00, /* bInterfaceProtocol (CDC section - 4.7). */ - 0x00), /* iInterface. */ - /* Endpoint 3 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_DATA_AVAILABLE_EP, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00), /* bInterval. */ - /* Endpoint 1 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00) /* bInterval. */ -}; - -/* - * Configuration Descriptor wrapper. - */ -static const USBDescriptor vcom_configuration_descriptor = { - sizeof vcom_configuration_descriptor_data, - vcom_configuration_descriptor_data -}; - -/* - * U.S. English language identifier. - */ -static const uint8_t vcom_string0[] = { - USB_DESC_BYTE(4), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */ -}; - -/* - * Vendor string. - */ -static const uint8_t vcom_string1[] = { - USB_DESC_BYTE(38), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0, - 'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0, - 'c', 0, 's', 0 -}; - -/* - * Device Description string. - */ -static const uint8_t vcom_string2[] = { - USB_DESC_BYTE(56), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0, - 'R', 0, 'T', 0, ' ', 0, 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0, - 'a', 0, 'l', 0, ' ', 0, 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0, - 'o', 0, 'r', 0, 't', 0 -}; - -/* - * Serial Number string. - */ -static const uint8_t vcom_string3[] = { - USB_DESC_BYTE(8), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - '0' + CH_KERNEL_MAJOR, 0, - '0' + CH_KERNEL_MINOR, 0, - '0' + CH_KERNEL_PATCH, 0 -}; - -/* - * Strings wrappers array. - */ -static const USBDescriptor vcom_strings[] = { - {sizeof vcom_string0, vcom_string0}, - {sizeof vcom_string1, vcom_string1}, - {sizeof vcom_string2, vcom_string2}, - {sizeof vcom_string3, vcom_string3} -}; - -/* - * Handles the GET_DESCRIPTOR callback. All required descriptors must be - * handled here. - */ -static const USBDescriptor *get_descriptor(USBDriver *usbp, - uint8_t dtype, - uint8_t dindex, - uint16_t lang) { - - (void)usbp; - (void)lang; - switch (dtype) { - case USB_DESCRIPTOR_DEVICE: - return &vcom_device_descriptor; - case USB_DESCRIPTOR_CONFIGURATION: - return &vcom_configuration_descriptor; - case USB_DESCRIPTOR_STRING: - if (dindex < 4) - return &vcom_strings[dindex]; - } - return NULL; -} - -/** - * @brief IN EP1 state. - */ -static USBInEndpointState ep1instate; - -/** - * @brief OUT EP1 state. - */ -static USBOutEndpointState ep1outstate; - -/** - * @brief EP1 initialization structure (both IN and OUT). - */ -static const USBEndpointConfig ep1config = { - USB_EP_MODE_TYPE_BULK, - NULL, - sduDataTransmitted, - sduDataReceived, - 0x0040, - 0x0040, - &ep1instate, - &ep1outstate, - 2, - NULL -}; - -/** - * @brief IN EP2 state. - */ -static USBInEndpointState ep2instate; - -/** - * @brief EP2 initialization structure (IN only). - */ -static const USBEndpointConfig ep2config = { - USB_EP_MODE_TYPE_INTR, - NULL, - sduInterruptTransmitted, - NULL, - 0x0010, - 0x0000, - &ep2instate, - NULL, - 1, - NULL -}; - -/* - * Handles the USB driver global events. - */ -static void usb_event(USBDriver *usbp, usbevent_t event) { - extern SerialUSBDriver SDU1; - - switch (event) { - case USB_EVENT_ADDRESS: - return; - case USB_EVENT_CONFIGURED: - chSysLockFromISR(); - - /* Enables the endpoints specified into the configuration. - Note, this callback is invoked from an ISR so I-Class functions - must be used.*/ - usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config); - usbInitEndpointI(usbp, USBD1_INTERRUPT_REQUEST_EP, &ep2config); - - /* Resetting the state of the CDC subsystem.*/ - sduConfigureHookI(&SDU1); - - chSysUnlockFromISR(); - return; - case USB_EVENT_RESET: - /* Falls into.*/ - case USB_EVENT_UNCONFIGURED: - /* Falls into.*/ - case USB_EVENT_SUSPEND: - chSysLockFromISR(); - - /* Disconnection event on suspend.*/ - sduSuspendHookI(&SDU1); - - chSysUnlockFromISR(); - return; - case USB_EVENT_WAKEUP: - chSysLockFromISR(); - - /* Connection event on wakeup.*/ - sduWakeupHookI(&SDU1); - - chSysUnlockFromISR(); - return; - case USB_EVENT_STALLED: - return; - } - return; -} - -/* - * Handles the USB driver global events. - */ -static void sof_handler(USBDriver *usbp) { - - (void)usbp; - - osalSysLockFromISR(); - sduSOFHookI(&SDU1); - osalSysUnlockFromISR(); -} - -/* - * USB driver configuration. - */ -const USBConfig usbcfg = { - usb_event, - get_descriptor, - sduRequestsHook, - sof_handler -}; - -/* - * Serial over USB driver configuration. - */ -const SerialUSBConfig serusbcfg = { - &USBD1, - USBD1_DATA_REQUEST_EP, - USBD1_DATA_AVAILABLE_EP, - USBD1_INTERRUPT_REQUEST_EP -}; diff --git a/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/usbcfg.h b/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/usbcfg.h deleted file mode 100644 index 886cd0222..000000000 --- a/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/usbcfg.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef USBCFG_H -#define USBCFG_H - -extern const USBConfig usbcfg; -extern SerialUSBConfig serusbcfg; -extern SerialUSBDriver SDU1; - -#endif /* USBCFG_H */ - -/** @} */ diff --git a/demos/STM32/RT-STM32F107-OLIMEX_P107-LWIP/Makefile b/demos/STM32/RT-STM32F107-OLIMEX_P107-LWIP/Makefile index 894f4c1de..f618fd163 100644 --- a/demos/STM32/RT-STM32F107-OLIMEX_P107-LWIP/Makefile +++ b/demos/STM32/RT-STM32F107-OLIMEX_P107-LWIP/Makefile @@ -18,7 +18,7 @@ ifeq ($(USE_CPPOPT),) USE_CPPOPT = -fno-rtti endif -# Enable this if you want the linker to remove unused code and data +# Enable this if you want the linker to remove unused code and data. ifeq ($(USE_LINK_GC),) USE_LINK_GC = yes endif @@ -28,16 +28,11 @@ ifeq ($(USE_LDOPT),) USE_LDOPT = endif -# Enable this if you want link time optimizations (LTO) +# Enable this if you want link time optimizations (LTO). ifeq ($(USE_LTO),) USE_LTO = yes endif -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - # Enable this if you want to see the full log while compiling. ifeq ($(USE_VERBOSE_COMPILE),) USE_VERBOSE_COMPILE = no @@ -74,20 +69,30 @@ ifeq ($(USE_FPU),) USE_FPU = no endif +# FPU-related options. +ifeq ($(USE_FPU_OPT),) + USE_FPU_OPT = -mfloat-abi=$(USE_FPU) -mfpu=fpv4-sp-d16 +endif + # # Architecture or project specific options ############################################################################## ############################################################################## -# Project, sources and paths +# Project, target, sources and paths # # Define project name here PROJECT = ch -CONFDIR := ./cfg -# Imported source files and paths -CHIBIOS = ../../.. +# Target settings. +MCU = cortex-m3 + +# Imported source files and paths. +CHIBIOS := ../../.. +CONFDIR := ./cfg +BUILDDIR := ./build +DEPDIR := ./.dep # Licensing files. include $(CHIBIOS)/os/license/license.mk @@ -101,6 +106,8 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk # RTOS files (optional). include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk +# Auto-build files in ./source recursively. +include $(CHIBIOS)/tools/mk/autobuild.mk # Other files (optional). include $(CHIBIOS)/test/lib/test.mk include $(CHIBIOS)/test/rt/rt_test.mk @@ -121,77 +128,23 @@ CSRC = $(ALLCSRC) \ # setting. CPPSRC = $(ALLCPPSRC) -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here +# List ASM source files here. ASMSRC = $(ALLASMSRC) + +# List ASM with preprocessor source files here. ASMXSRC = $(ALLXASMSRC) -INCDIR = $(ALLINC) $(TESTINC) $(CONFDIR) +# Inclusion directories. +INCDIR = $(CONFDIR) $(ALLINC) $(TESTINC) -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here +# Define C warning options here. CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes -# Define C++ warning options here +# Define C++ warning options here. CPPWARN = -Wall -Wextra -Wundef # -# Compiler settings +# Project, target, sources and paths ############################################################################## ############################################################################## @@ -214,8 +167,25 @@ ULIBDIR = ULIBS = # -# End of user defines +# End of user section ############################################################################## +############################################################################## +# Common rules +# + RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk +include $(RULESPATH)/arm-none-eabi.mk include $(RULESPATH)/rules.mk + +# +# Common rules +############################################################################## + +############################################################################## +# Custom rules +# + +# +# Custom rules +##############################################################################