git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@2504 35acf78f-673a-0410-8e92-d51de3d6d3f4

testhal/STM32/ADC/main.c

@@ -82,14 +82,23 @@ static msg_t Thread1(void *arg) {
 }
 
 /*
- * Entry point, note, the main() function is already a thread in the system
- * on entry.
+ * Application entry point.
  */
 int main(int argc, char **argv) {
 
   (void)argc;
   (void)argv;
 
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
   /*
    * Setting up analog inputs used by the demo.
    */

testhal/STM32/CAN/main.c

@@ -78,14 +78,23 @@ static msg_t can_tx(void * p) {
 }
 
 /*
- * Entry point, note, the main() function is already a thread in the system
- * on entry.
+ * Application entry point.
  */
 int main(int argc, char **argv) {
 
   (void)argc;
   (void)argv;
 
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
   /*
    * Activates the CAN driver 1.
    */

testhal/STM32/PWM/main.c

@@ -60,14 +60,23 @@ static PWMConfig pwmcfg = {
 };
 
 /*
- * Entry point, note, the main() function is already a thread in the system
- * on entry.
+ * Application entry point.
  */
 int main(int argc, char **argv) {
 
   (void)argc;
   (void)argv;
 
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
   /*
    * Creates the blinker thread.
    */

testhal/STM32/SPI/main.c

@@ -87,8 +87,7 @@ static msg_t spi_thread_2(void *p) {
 }
 
 /*
- * Entry point, note, the main() function is already a thread in the system
- * on entry.
+ * Application entry point.
  */
 int main(int argc, char **argv) {
   unsigned i;
@@ -96,6 +95,16 @@ int main(int argc, char **argv) {
   (void)argc;
   (void)argv;
 
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
   /*
    * SPI1 I/O pins setup.
    */

testhal/STM32/UART/main.c

@@ -111,14 +111,23 @@ static UARTConfig uart_cfg_1 = {
 };
 
 /*
- * Entry point, note, the main() function is already a thread in the system
- * on entry.
+ * Application entry point.
  */
 int main(int argc, char **argv) {
 
   (void)argc;
   (void)argv;
 
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
   /*
    * Activates the serial driver 2 using the driver default configuration.
    */

testhal/STM8S/SPI/demo/main.c

@@ -46,14 +46,19 @@ static ROMCONST uint8_t digits[32] = {
 static uint8_t buffer[32];
 
 /*
- * Entry point.
+ * Application entry point.
  */
 void main(void) {
 
   /*
-   * Board/HAL initialization.
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
    */
-  hwinit();
+  halInit();
+  chSysInit();
 
   /*
    * OS initialization.