diff --git a/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/.cproject b/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/.cproject new file mode 100644 index 000000000..43d91937e --- /dev/null +++ b/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/.cproject @@ -0,0 +1,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file diff --git a/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/.project b/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/.project new file mode 100644 index 000000000..afee97a63 --- /dev/null +++ b/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/.project @@ -0,0 +1,58 @@ + + + RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + board + 2 + CHIBIOS/os/hal/boards/ST_NUCLEO64_G474RE + + + fatfs + 2 + CHIBIOS/ext/fatfs + + + os + 2 + CHIBIOS/os + + + test + 2 + virtual:/virtual + + + test/oslib + 2 + CHIBIOS/test/oslib + + + test/rt + 2 + CHIBIOS/test/rt + + + diff --git a/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/Makefile b/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/Makefile new file mode 100644 index 000000000..22d328552 --- /dev/null +++ b/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/Makefile @@ -0,0 +1,198 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data. +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO). +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# FPU-related options. +ifeq ($(USE_FPU_OPT),) + USE_FPU_OPT = -mfloat-abi=$(USE_FPU) -mfpu=fpv4-sp-d16 +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, target, sources and paths +# + +# Define project name here +PROJECT = ch + +# Target settings. +MCU = cortex-m4 + +# Imported source files and paths. +CHIBIOS := ../../.. +CONFDIR := ./cfg +BUILDDIR := ./build +DEPDIR := ./.dep + +# Licensing files. +include $(CHIBIOS)/os/license/license.mk +# Common files. +include $(CHIBIOS)/os/common/utils/utils.mk +# Startup files. +include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32l4xx.mk +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32L4xx+/platform.mk +include $(CHIBIOS)/os/hal/boards/ST_STM32L4R9I_DISCOVERY/board.mk +include $(CHIBIOS)/os/hal/osal/rt-nil/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMv7-M-ALT/compilers/GCC/mk/port.mk +include $(CHIBIOS)/os/sb/host/compilers/GCC/sbhost.mk +# VFS files (optional). +include $(CHIBIOS)/os/vfs/vfs.mk +include $(CHIBIOS)/os/vfs/vfs_syscalls.mk +# Auto-build files in ./source recursively. +include $(CHIBIOS)/tools/mk/autobuild.mk +# Other files (optional). +include $(CHIBIOS)/os/test/test.mk +include $(CHIBIOS)/test/rt/rt_test.mk +include $(CHIBIOS)/test/oslib/oslib_test.mk +include $(CHIBIOS)/os/hal/lib/streams/streams.mk +include $(CHIBIOS)/os/various/shell/shell.mk +include $(CHIBIOS)/os/various/fatfs_bindings/fatfs.mk + +# Define linker script file here +LDSCRIPT= ./STM32L4R9xI_SB.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(ALLCSRC) \ + $(TESTSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = $(ALLCPPSRC) + +# List ASM source files here. +ASMSRC = $(ALLASMSRC) + +# List ASM with preprocessor source files here. +ASMXSRC = $(ALLXASMSRC) + +# Inclusion directories. +INCDIR = $(CONFDIR) $(ALLINC) $(TESTINC) + +# Define C warning options here. +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes -Wcast-align=strict + +# Define C++ warning options here. +CPPWARN = -Wall -Wextra -Wundef + +# +# Project, target, sources and paths +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user section +############################################################################## + +############################################################################## +# Common rules +# + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk +include $(RULESPATH)/arm-none-eabi.mk +include $(RULESPATH)/rules.mk + +# +# Common rules +############################################################################## + +############################################################################## +# Custom rules +# + +# +# Custom rules +############################################################################## diff --git a/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/STM32L4R9xI_SB.ld b/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/STM32L4R9xI_SB.ld new file mode 100644 index 000000000..27f6c7a03 --- /dev/null +++ b/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/STM32L4R9xI_SB.ld @@ -0,0 +1,85 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32L4R9xI memory setup. + */ +MEMORY +{ + flash0 (rx) : org = 0x08000000, len = 2M /* Host code. */ + flash1 (rx) : org = 0x00000000, len = 0 + flash2 (rx) : org = 0x00000000, len = 0 + flash3 (rx) : org = 0x00000000, len = 0 + flash4 (rx) : org = 0x00000000, len = 0 + flash5 (rx) : org = 0x00000000, len = 0 + flash6 (rx) : org = 0x00000000, len = 0 + flash7 (rx) : org = 0x00000000, len = 0 + ram0 (wx) : org = 0x20000000, len = 640k - 256k /* Host data. */ + ram1 (wx) : org = 0x20060000, len = 128k /* Sandbox 1. */ + ram2 (wx) : org = 0x20080000, len = 128k /* Sandbox 2. */ + ram3 (wx) : org = 0x00000000, len = 0 + ram4 (wx) : org = 0x00000000, len = 0 + ram5 (wx) : org = 0x00000000, len = 0 + ram6 (wx) : org = 0x00000000, len = 0 + ram7 (wx) : org = 0x00000000, len = 0 +} + +/* For each data/text section two region are defined, a virtual region + and a load region (_LMA suffix).*/ + +/* Flash region to be used for exception vectors.*/ +REGION_ALIAS("VECTORS_FLASH", flash0); +REGION_ALIAS("VECTORS_FLASH_LMA", flash0); + +/* Flash region to be used for constructors and destructors.*/ +REGION_ALIAS("XTORS_FLASH", flash0); +REGION_ALIAS("XTORS_FLASH_LMA", flash0); + +/* Flash region to be used for code text.*/ +REGION_ALIAS("TEXT_FLASH", flash0); +REGION_ALIAS("TEXT_FLASH_LMA", flash0); + +/* Flash region to be used for read only data.*/ +REGION_ALIAS("RODATA_FLASH", flash0); +REGION_ALIAS("RODATA_FLASH_LMA", flash0); + +/* Flash region to be used for various.*/ +REGION_ALIAS("VARIOUS_FLASH", flash0); +REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); + +/* Flash region to be used for RAM(n) initialization data.*/ +REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); + +/* RAM region to be used for Main stack. This stack accommodates the processing + of all exceptions and interrupts.*/ +REGION_ALIAS("MAIN_STACK_RAM", ram0); + +/* RAM region to be used for the process stack. This is the stack used by + the main() function.*/ +REGION_ALIAS("PROCESS_STACK_RAM", ram0); + +/* RAM region to be used for data segment.*/ +REGION_ALIAS("DATA_RAM", ram0); +REGION_ALIAS("DATA_RAM_LMA", flash0); + +/* RAM region to be used for BSS segment.*/ +REGION_ALIAS("BSS_RAM", ram0); + +/* RAM region to be used for the default heap.*/ +REGION_ALIAS("HEAP_RAM", ram0); + +/* Generic rules inclusion.*/ +INCLUDE rules.ld diff --git a/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/cfg/chconf.h b/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/cfg/chconf.h new file mode 100644 index 000000000..86e033771 --- /dev/null +++ b/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/cfg/chconf.h @@ -0,0 +1,843 @@ +/* + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file rt/templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ +#define _CHIBIOS_RT_CONF_VER_7_0_ + +/*===========================================================================*/ +/** + * @name System settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Handling of instances. + * @note If enabled then threads assigned to various instances can + * interact each other using the same synchronization objects. + * If disabled then each OS instance is a separate world, no + * direct interactions are handled by the OS. + */ +#if !defined(CH_CFG_SMP_MODE) +#define CH_CFG_SMP_MODE FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16, 32 or 64 bits. + */ +#if !defined(CH_CFG_ST_RESOLUTION) +#define CH_CFG_ST_RESOLUTION 32 +#endif + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#if !defined(CH_CFG_ST_FREQUENCY) +#define CH_CFG_ST_FREQUENCY 10000 +#endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE 32 +#endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE 32 +#endif + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#if !defined(CH_CFG_ST_TIMEDELTA) +#define CH_CFG_ST_TIMEDELTA 2 +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#if !defined(CH_CFG_TIME_QUANTUM) +#define CH_CFG_TIME_QUANTUM 0 +#endif + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#if !defined(CH_CFG_NO_IDLE_THREAD) +#define CH_CFG_NO_IDLE_THREAD FALSE +#endif + +/** + * @brief Kernel hardening level. + * @details This option is the level of functional-safety checks enabled + * in the kerkel. The meaning is: + * - 0: No checks, maximum performance. + * - 1: Reasonable checks. + * - 2: All checks. + * . + */ +#if !defined(CH_CFG_HARDENING_LEVEL) +#define CH_CFG_HARDENING_LEVEL 0 +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_OPTIMIZE_SPEED) +#define CH_CFG_OPTIMIZE_SPEED TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_TM) +#define CH_CFG_USE_TM TRUE +#endif + +/** + * @brief Time Stamps APIs. + * @details If enabled then the time stamps APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_TIMESTAMP) +#define CH_CFG_USE_TIMESTAMP TRUE +#endif + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_REGISTRY) +#define CH_CFG_USE_REGISTRY TRUE +#endif + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_WAITEXIT) +#define CH_CFG_USE_WAITEXIT TRUE +#endif + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_SEMAPHORES) +#define CH_CFG_USE_SEMAPHORES TRUE +#endif + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +#endif + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MUTEXES) +#define CH_CFG_USE_MUTEXES TRUE +#endif + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +#endif + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_CONDVARS) +#define CH_CFG_USE_CONDVARS TRUE +#endif + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE +#endif + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_EVENTS) +#define CH_CFG_USE_EVENTS TRUE +#endif + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE +#endif + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MESSAGES) +#define CH_CFG_USE_MESSAGES TRUE +#endif + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE +#endif + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#if !defined(CH_CFG_USE_DYNAMIC) +#define CH_CFG_USE_DYNAMIC TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name OSLIB options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_MAILBOXES) +#define CH_CFG_USE_MAILBOXES TRUE +#endif + +/** + * @brief Memory checks APIs. + * @details If enabled then the memory checks APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMCHECKS) +#define CH_CFG_USE_MEMCHECKS TRUE +#endif + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMCORE) +#define CH_CFG_USE_MEMCORE TRUE +#endif + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#if !defined(CH_CFG_MEMCORE_SIZE) +#define CH_CFG_MEMCORE_SIZE 0 +#endif + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#if !defined(CH_CFG_USE_HEAP) +#define CH_CFG_USE_HEAP TRUE +#endif + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMPOOLS) +#define CH_CFG_USE_MEMPOOLS TRUE +#endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS TRUE +#endif + +/** + * @brief Pipes APIs. + * @details If enabled then the pipes APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_PIPES) +#define CH_CFG_USE_PIPES TRUE +#endif + +/** + * @brief Objects Caches APIs. + * @details If enabled then the objects caches APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_CACHES) +#define CH_CFG_USE_OBJ_CACHES TRUE +#endif + +/** + * @brief Delegate threads APIs. + * @details If enabled then the delegate threads APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_DELEGATES) +#define CH_CFG_USE_DELEGATES TRUE +#endif + +/** + * @brief Jobs Queues APIs. + * @details If enabled then the jobs queues APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_JOBS) +#define CH_CFG_USE_JOBS TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY TRUE +#endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +#endif + +/** + * @brief Enables the registry of generic objects. + */ +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE +#endif + +/** + * @brief Enables factory for generic buffers. + */ +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE +#endif + +/** + * @brief Enables factory for semaphores. + */ +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES TRUE +#endif + +/** + * @brief Enables factory for mailboxes. + */ +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES TRUE +#endif + +/** + * @brief Enables factory for objects FIFOs. + */ +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE +#endif + +/** + * @brief Enables factory for Pipes. + */ +#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) +#define CH_CFG_FACTORY_PIPES TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_STATISTICS) +#define CH_DBG_STATISTICS FALSE +#endif + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) +#define CH_DBG_SYSTEM_STATE_CHECK TRUE +#endif + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_CHECKS) +#define CH_DBG_ENABLE_CHECKS TRUE +#endif + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_ASSERTS) +#define CH_DBG_ENABLE_ASSERTS TRUE +#endif + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_MASK) +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED +#endif + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) +#define CH_DBG_TRACE_BUFFER_SIZE 128 +#endif + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#if !defined(CH_DBG_ENABLE_STACK_CHECK) +#define CH_DBG_ENABLE_STACK_CHECK FALSE +#endif + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_FILL_THREADS) +#define CH_DBG_FILL_THREADS FALSE +#endif + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#if !defined(CH_DBG_THREADS_PROFILING) +#define CH_DBG_THREADS_PROFILING FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add system custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK() { \ + /* Add system initialization code here.*/ \ +} + +/** + * @brief OS instance structure extension. + * @details User fields added to the end of the @p os_instance_t structure. + */ +#define CH_CFG_OS_INSTANCE_EXTRA_FIELDS \ + /* Add OS instance custom fields here.*/ + +/** + * @brief OS instance initialization hook. + * + * @param[in] oip pointer to the @p os_instance_t structure + */ +#define CH_CFG_OS_INSTANCE_INIT_HOOK(oip) { \ + /* Add OS instance initialization code here.*/ \ +} + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p _thread_init() function. + * + * @note It is invoked from within @p _thread_init() and implicitly from all + * the threads creation APIs. + * + * @param[in] tp pointer to the @p thread_t structure + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @param[in] tp pointer to the @p thread_t structure + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + * + * @param[in] ntp thread being switched in + * @param[in] otp thread being switched out + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** + * @brief Runtime Faults Collection Unit hook. + * @details This hook is invoked each time new faults are collected and stored. + */ +#define CH_CFG_RUNTIME_FAULTS_HOOK(mask) { \ + /* Faults handling code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#define PORT_USE_SYSCALL TRUE +#define PORT_SWITCHED_REGIONS_NUMBER 2 + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/cfg/ffconf.h b/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/cfg/ffconf.h new file mode 100644 index 000000000..b76edc527 --- /dev/null +++ b/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/cfg/ffconf.h @@ -0,0 +1,304 @@ +/* CHIBIOS FIX */ +#include "ch.h" +#define FATFS_CHIBIOS_EXTENSIONS + +/*---------------------------------------------------------------------------/ +/ FatFs Functional Configurations +/---------------------------------------------------------------------------*/ + +#define FFCONF_DEF 86631 /* Revision ID */ + +/*---------------------------------------------------------------------------/ +/ Function Configurations +/---------------------------------------------------------------------------*/ + +#define FF_FS_READONLY 0 +/* This option switches read-only configuration. (0:Read/Write or 1:Read-only) +/ Read-only configuration removes writing API functions, f_write(), f_sync(), +/ f_unlink(), f_mkdir(), f_chmod(), f_rename(), f_truncate(), f_getfree() +/ and optional writing functions as well. */ + + +#define FF_FS_MINIMIZE 0 +/* This option defines minimization level to remove some basic API functions. +/ +/ 0: Basic functions are fully enabled. +/ 1: f_stat(), f_getfree(), f_unlink(), f_mkdir(), f_truncate() and f_rename() +/ are removed. +/ 2: f_opendir(), f_readdir() and f_closedir() are removed in addition to 1. +/ 3: f_lseek() function is removed in addition to 2. */ + + +#define FF_USE_FIND 0 +/* This option switches filtered directory read functions, f_findfirst() and +/ f_findnext(). (0:Disable, 1:Enable 2:Enable with matching altname[] too) */ + + +#define FF_USE_MKFS 0 +/* This option switches f_mkfs() function. (0:Disable or 1:Enable) */ + + +#define FF_USE_FASTSEEK 0 +/* This option switches fast seek function. (0:Disable or 1:Enable) */ + + +#define FF_USE_EXPAND 0 +/* This option switches f_expand function. (0:Disable or 1:Enable) */ + + +#define FF_USE_CHMOD 0 +/* This option switches attribute manipulation functions, f_chmod() and f_utime(). +/ (0:Disable or 1:Enable) Also FF_FS_READONLY needs to be 0 to enable this option. */ + + +#define FF_USE_LABEL 0 +/* This option switches volume label functions, f_getlabel() and f_setlabel(). +/ (0:Disable or 1:Enable) */ + + +#define FF_USE_FORWARD 0 +/* This option switches f_forward() function. (0:Disable or 1:Enable) */ + + +#define FF_USE_STRFUNC 0 +#define FF_PRINT_LLI 0 +#define FF_PRINT_FLOAT 0 +#define FF_STRF_ENCODE 0 +/* FF_USE_STRFUNC switches string functions, f_gets(), f_putc(), f_puts() and +/ f_printf(). +/ +/ 0: Disable. FF_PRINT_LLI, FF_PRINT_FLOAT and FF_STRF_ENCODE have no effect. +/ 1: Enable without LF-CRLF conversion. +/ 2: Enable with LF-CRLF conversion. +/ +/ FF_PRINT_LLI = 1 makes f_printf() support long long argument and FF_PRINT_FLOAT = 1/2 + makes f_printf() support floating point argument. These features want C99 or later. +/ When FF_LFN_UNICODE >= 1 with LFN enabled, string functions convert the character +/ encoding in it. FF_STRF_ENCODE selects assumption of character encoding ON THE FILE +/ to be read/written via those functions. +/ +/ 0: ANSI/OEM in current CP +/ 1: Unicode in UTF-16LE +/ 2: Unicode in UTF-16BE +/ 3: Unicode in UTF-8 +*/ + + +/*---------------------------------------------------------------------------/ +/ Locale and Namespace Configurations +/---------------------------------------------------------------------------*/ + +#define FF_CODE_PAGE 850 +/* This option specifies the OEM code page to be used on the target system. +/ Incorrect code page setting can cause a file open failure. +/ +/ 437 - U.S. +/ 720 - Arabic +/ 737 - Greek +/ 771 - KBL +/ 775 - Baltic +/ 850 - Latin 1 +/ 852 - Latin 2 +/ 855 - Cyrillic +/ 857 - Turkish +/ 860 - Portuguese +/ 861 - Icelandic +/ 862 - Hebrew +/ 863 - Canadian French +/ 864 - Arabic +/ 865 - Nordic +/ 866 - Russian +/ 869 - Greek 2 +/ 932 - Japanese (DBCS) +/ 936 - Simplified Chinese (DBCS) +/ 949 - Korean (DBCS) +/ 950 - Traditional Chinese (DBCS) +/ 0 - Include all code pages above and configured by f_setcp() +*/ + + +#define FF_USE_LFN 3 +#define FF_MAX_LFN 255 +/* The FF_USE_LFN switches the support for LFN (long file name). +/ +/ 0: Disable LFN. FF_MAX_LFN has no effect. +/ 1: Enable LFN with static working buffer on the BSS. Always NOT thread-safe. +/ 2: Enable LFN with dynamic working buffer on the STACK. +/ 3: Enable LFN with dynamic working buffer on the HEAP. +/ +/ To enable the LFN, ffunicode.c needs to be added to the project. The LFN function +/ requiers certain internal working buffer occupies (FF_MAX_LFN + 1) * 2 bytes and +/ additional (FF_MAX_LFN + 44) / 15 * 32 bytes when exFAT is enabled. +/ The FF_MAX_LFN defines size of the working buffer in UTF-16 code unit and it can +/ be in range of 12 to 255. It is recommended to be set it 255 to fully support LFN +/ specification. +/ When use stack for the working buffer, take care on stack overflow. When use heap +/ memory for the working buffer, memory management functions, ff_memalloc() and +/ ff_memfree() exemplified in ffsystem.c, need to be added to the project. */ + + +#define FF_LFN_UNICODE 0 +/* This option switches the character encoding on the API when LFN is enabled. +/ +/ 0: ANSI/OEM in current CP (TCHAR = char) +/ 1: Unicode in UTF-16 (TCHAR = WCHAR) +/ 2: Unicode in UTF-8 (TCHAR = char) +/ 3: Unicode in UTF-32 (TCHAR = DWORD) +/ +/ Also behavior of string I/O functions will be affected by this option. +/ When LFN is not enabled, this option has no effect. */ + + +#define FF_LFN_BUF 255 +#define FF_SFN_BUF 12 +/* This set of options defines size of file name members in the FILINFO structure +/ which is used to read out directory items. These values should be suffcient for +/ the file names to read. The maximum possible length of the read file name depends +/ on character encoding. When LFN is not enabled, these options have no effect. */ + + +#define FF_FS_RPATH 0 +/* This option configures support for relative path. +/ +/ 0: Disable relative path and remove related functions. +/ 1: Enable relative path. f_chdir() and f_chdrive() are available. +/ 2: f_getcwd() function is available in addition to 1. +*/ + + +/*---------------------------------------------------------------------------/ +/ Drive/Volume Configurations +/---------------------------------------------------------------------------*/ + +#define FF_VOLUMES 1 +/* Number of volumes (logical drives) to be used. (1-10) */ + + +#define FF_STR_VOLUME_ID 0 +#define FF_VOLUME_STRS "RAM","NAND","CF","SD","SD2","USB","USB2","USB3" +/* FF_STR_VOLUME_ID switches support for volume ID in arbitrary strings. +/ When FF_STR_VOLUME_ID is set to 1 or 2, arbitrary strings can be used as drive +/ number in the path name. FF_VOLUME_STRS defines the volume ID strings for each +/ logical drives. Number of items must not be less than FF_VOLUMES. Valid +/ characters for the volume ID strings are A-Z, a-z and 0-9, however, they are +/ compared in case-insensitive. If FF_STR_VOLUME_ID >= 1 and FF_VOLUME_STRS is +/ not defined, a user defined volume string table needs to be defined as: +/ +/ const char* VolumeStr[FF_VOLUMES] = {"ram","flash","sd","usb",... +*/ + + +#define FF_MULTI_PARTITION 0 +/* This option switches support for multiple volumes on the physical drive. +/ By default (0), each logical drive number is bound to the same physical drive +/ number and only an FAT volume found on the physical drive will be mounted. +/ When this function is enabled (1), each logical drive number can be bound to +/ arbitrary physical drive and partition listed in the VolToPart[]. Also f_fdisk() +/ funciton will be available. */ + + +#define FF_MIN_SS 512 +#define FF_MAX_SS 512 +/* This set of options configures the range of sector size to be supported. (512, +/ 1024, 2048 or 4096) Always set both 512 for most systems, generic memory card and +/ harddisk, but a larger value may be required for on-board flash memory and some +/ type of optical media. When FF_MAX_SS is larger than FF_MIN_SS, FatFs is configured +/ for variable sector size mode and disk_ioctl() function needs to implement +/ GET_SECTOR_SIZE command. */ + + +#define FF_LBA64 0 +/* This option switches support for 64-bit LBA. (0:Disable or 1:Enable) +/ To enable the 64-bit LBA, also exFAT needs to be enabled. (FF_FS_EXFAT == 1) */ + + +#define FF_MIN_GPT 0x10000000 +/* Minimum number of sectors to switch GPT as partitioning format in f_mkfs and +/ f_fdisk function. 0x100000000 max. This option has no effect when FF_LBA64 == 0. */ + + +#define FF_USE_TRIM 0 +/* This option switches support for ATA-TRIM. (0:Disable or 1:Enable) +/ To enable Trim function, also CTRL_TRIM command should be implemented to the +/ disk_ioctl() function. */ + + + +/*---------------------------------------------------------------------------/ +/ System Configurations +/---------------------------------------------------------------------------*/ + +#define FF_FS_TINY 0 +/* This option switches tiny buffer configuration. (0:Normal or 1:Tiny) +/ At the tiny configuration, size of file object (FIL) is shrinked FF_MAX_SS bytes. +/ Instead of private sector buffer eliminated from the file object, common sector +/ buffer in the filesystem object (FATFS) is used for the file data transfer. */ + + +#define FF_FS_EXFAT 1 +/* This option switches support for exFAT filesystem. (0:Disable or 1:Enable) +/ To enable exFAT, also LFN needs to be enabled. (FF_USE_LFN >= 1) +/ Note that enabling exFAT discards ANSI C (C89) compatibility. */ + + +#define FF_FS_NORTC 0 +#define FF_NORTC_MON 1 +#define FF_NORTC_MDAY 1 +#define FF_NORTC_YEAR 2020 +/* The option FF_FS_NORTC switches timestamp functiton. If the system does not have +/ any RTC function or valid timestamp is not needed, set FF_FS_NORTC = 1 to disable +/ the timestamp function. Every object modified by FatFs will have a fixed timestamp +/ defined by FF_NORTC_MON, FF_NORTC_MDAY and FF_NORTC_YEAR in local time. +/ To enable timestamp function (FF_FS_NORTC = 0), get_fattime() function need to be +/ added to the project to read current time form real-time clock. FF_NORTC_MON, +/ FF_NORTC_MDAY and FF_NORTC_YEAR have no effect. +/ These options have no effect in read-only configuration (FF_FS_READONLY = 1). */ + + +#define FF_FS_NOFSINFO 0 +/* If you need to know correct free space on the FAT32 volume, set bit 0 of this +/ option, and f_getfree() function at first time after volume mount will force +/ a full FAT scan. Bit 1 controls the use of last allocated cluster number. +/ +/ bit0=0: Use free cluster count in the FSINFO if available. +/ bit0=1: Do not trust free cluster count in the FSINFO. +/ bit1=0: Use last allocated cluster number in the FSINFO if available. +/ bit1=1: Do not trust last allocated cluster number in the FSINFO. +*/ + + +#define FF_FS_LOCK 0 +/* The option FF_FS_LOCK switches file lock function to control duplicated file open +/ and illegal operation to open objects. This option must be 0 when FF_FS_READONLY +/ is 1. +/ +/ 0: Disable file lock function. To avoid volume corruption, application program +/ should avoid illegal open, remove and rename to the open objects. +/ >0: Enable file lock function. The value defines how many files/sub-directories +/ can be opened simultaneously under file lock control. Note that the file +/ lock control is independent of re-entrancy. */ + + +#define FF_FS_REENTRANT 0 +#define FF_FS_TIMEOUT TIME_MS2I(1000) +#define FF_SYNC_t semaphore_t* +/* The option FF_FS_REENTRANT switches the re-entrancy (thread safe) of the FatFs +/ module itself. Note that regardless of this option, file access to different +/ volume is always re-entrant and volume control functions, f_mount(), f_mkfs() +/ and f_fdisk() function, are always not re-entrant. Only file/directory access +/ to the same volume is under control of this function. +/ +/ 0: Disable re-entrancy. FF_FS_TIMEOUT and FF_SYNC_t have no effect. +/ 1: Enable re-entrancy. Also user provided synchronization handlers, +/ ff_req_grant(), ff_rel_grant(), ff_del_syncobj() and ff_cre_syncobj() +/ function, must be added to the project. Samples are available in +/ option/syscall.c. +/ +/ The FF_FS_TIMEOUT defines timeout period in unit of time tick. +/ The FF_SYNC_t defines O/S dependent sync object type. e.g. HANDLE, ID, OS_EVENT*, +/ SemaphoreHandle_t and etc. A header file for O/S definitions needs to be +/ included somewhere in the scope of ff.h. */ + + + +/*--- End of configuration options ---*/ diff --git a/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/cfg/halconf.h b/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/cfg/halconf.h new file mode 100644 index 000000000..ebdff0fa6 --- /dev/null +++ b/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/cfg/halconf.h @@ -0,0 +1,550 @@ +/* + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#define _CHIBIOS_HAL_CONF_ +#define _CHIBIOS_HAL_CONF_VER_8_0_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EFlash subsystem. + */ +#if !defined(HAL_USE_EFL) || defined(__DOXYGEN__) +#define HAL_USE_EFL FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC TRUE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL TRUE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SIO subsystem. + */ +#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) +#define HAL_USE_SIO FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the TRNG subsystem. + */ +#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) +#define HAL_USE_TRNG FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/** + * @brief Enables the WSPI subsystem. + */ +#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) +#define HAL_USE_WSPI FALSE +#endif + +/*===========================================================================*/ +/* PAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) +#define PAL_USE_CALLBACKS FALSE +#endif + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) +#define PAL_USE_WAIT FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/** + * @brief Enforces the driver to use direct callbacks rather than OSAL events. + */ +#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) +#define CAN_ENFORCE_USE_CALLBACKS FALSE +#endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ +/* DAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) +#define DAC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define DAC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the zero-copy API. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/** + * @brief OCR initialization constant for V20 cards. + */ +#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) +#define SDC_INIT_OCR_V20 0x50FF8000U +#endif + +/** + * @brief OCR initialization constant for non-V20 cards. + */ +#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) +#define SDC_INIT_OCR 0x80100000U +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SIO driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SIO_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SIO_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Support for thread synchronization API. + */ +#if !defined(SIO_USE_SYNCHRONIZATION) || defined(__DOXYGEN__) +#define SIO_USE_SYNCHRONIZATION TRUE +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Inserts an assertion on function errors before returning. + */ +#if !defined(SPI_USE_ASSERT_ON_ERROR) || defined(__DOXYGEN__) +#define SPI_USE_ASSERT_ON_ERROR TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/** + * @brief Handling method for SPI CS line. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) +#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +/*===========================================================================*/ +/* WSPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) +#define WSPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define WSPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/cfg/mcuconf.h b/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/cfg/mcuconf.h new file mode 100644 index 000000000..033e5e59b --- /dev/null +++ b/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/cfg/mcuconf.h @@ -0,0 +1,393 @@ +/* + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32L4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#ifndef MCUCONF_H +#define MCUCONF_H + +#define STM32L4xx_MCUCONF +#define STM32L4R5_MCUCONF +#define STM32L4S5_MCUCONF +#define STM32L4R7_MCUCONF +#define STM32L4S7_MCUCONF +#define STM32L4R9_MCUCONF +#define STM32L4S9_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_CLOCK_DYNAMIC FALSE +#define STM32_VOS STM32_VOS_RANGE1 +#define STM32_PWR_BOOST TRUE +#define STM32_PWR_CR2 (PWR_CR2_PLS_LEV0 | PWR_CR2_IOSV) +#define STM32_PWR_CR3 (PWR_CR3_EIWF) +#define STM32_PWR_CR4 (0U) +#define STM32_PWR_PUCRA (0U) +#define STM32_PWR_PDCRA (0U) +#define STM32_PWR_PUCRB (0U) +#define STM32_PWR_PDCRB (0U) +#define STM32_PWR_PUCRC (0U) +#define STM32_PWR_PDCRC (0U) +#define STM32_PWR_PUCRD (0U) +#define STM32_PWR_PDCRD (0U) +#define STM32_PWR_PUCRE (0U) +#define STM32_PWR_PDCRE (0U) +#define STM32_PWR_PUCRF (0U) +#define STM32_PWR_PDCRF (0U) +#define STM32_PWR_PUCRG (0U) +#define STM32_PWR_PDCRG (0U) +#define STM32_PWR_PUCRH (0U) +#define STM32_PWR_PDCRH (0U) +#define STM32_PWR_PUCRI (0U) +#define STM32_PWR_PDCRI (0U) +#define STM32_HSI16_ENABLED FALSE +#define STM32_HSI48_ENABLED FALSE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_MSIPLL_ENABLED FALSE +#define STM32_MSIRANGE STM32_MSIRANGE_4M +#define STM32_MSISRANGE STM32_MSISRANGE_4M +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE 4 +#define STM32_PLLN_VALUE 60 +#define STM32_PLLPDIV_VALUE 0 +#define STM32_PLLP_VALUE 7 +#define STM32_PLLQ_VALUE 4 +#define STM32_PLLR_VALUE 2 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV1 +#define STM32_PPRE2 STM32_PPRE2_DIV1 +#define STM32_STOPWUCK STM32_STOPWUCK_MSI +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_MCOPRE STM32_MCOPRE_DIV1 +#define STM32_LSCOSEL STM32_LSCOSEL_NOCLOCK +#define STM32_PLLSAI1M_VALUE 4 +#define STM32_PLLSAI1N_VALUE 60 +#define STM32_PLLSAI1PDIV_VALUE 6 +#define STM32_PLLSAI1P_VALUE 7 +#define STM32_PLLSAI1Q_VALUE 6 +#define STM32_PLLSAI1R_VALUE 6 +#define STM32_PLLSAI2M_VALUE 4 +#define STM32_PLLSAI2N_VALUE 60 +#define STM32_PLLSAI2PDIV_VALUE 6 +#define STM32_PLLSAI2P_VALUE 7 +#define STM32_PLLSAI2Q_VALUE 6 +#define STM32_PLLSAI2R_VALUE 6 +#define STM32_PLLSAI2DIVR STM32_PLLSAI2DIVR_DIV16 + +/* + * Peripherals clock sources. + */ +#define STM32_USART1SEL STM32_USART1SEL_SYSCLK +#define STM32_USART2SEL STM32_USART2SEL_SYSCLK +#define STM32_USART3SEL STM32_USART3SEL_SYSCLK +#define STM32_UART4SEL STM32_UART4SEL_SYSCLK +#define STM32_UART5SEL STM32_UART5SEL_SYSCLK +#define STM32_LPUART1SEL STM32_LPUART1SEL_SYSCLK +#define STM32_I2C1SEL STM32_I2C1SEL_SYSCLK +#define STM32_I2C2SEL STM32_I2C2SEL_SYSCLK +#define STM32_I2C3SEL STM32_I2C3SEL_SYSCLK +#define STM32_I2C4SEL STM32_I2C4SEL_SYSCLK +#define STM32_LPTIM1SEL STM32_LPTIM1SEL_PCLK1 +#define STM32_LPTIM2SEL STM32_LPTIM2SEL_PCLK1 +#define STM32_CLK48SEL STM32_CLK48SEL_PLLSAI1 +#define STM32_ADCSEL STM32_ADCSEL_SYSCLK +#define STM32_DFSDMSEL STM32_DFSDMSEL_PCLK2 +#define STM32_ADFSDMSEL STM32_ADFSDMSEL_SAI1CLK +#define STM32_SAI1SEL STM32_SAI1SEL_OFF +#define STM32_SAI2SEL STM32_SAI2SEL_OFF +#define STM32_DSISEL STM32_DSISEL_DSIPHY +#define STM32_SDMMCSEL STM32_SDMMCSEL_48CLK +#define STM32_OSPISEL STM32_OSPISEL_SYSCLK +#define STM32_RTCSEL STM32_RTCSEL_LSI + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY 6 +#define STM32_IRQ_EXTI1_PRIORITY 6 +#define STM32_IRQ_EXTI2_PRIORITY 6 +#define STM32_IRQ_EXTI3_PRIORITY 6 +#define STM32_IRQ_EXTI4_PRIORITY 6 +#define STM32_IRQ_EXTI5_9_PRIORITY 6 +#define STM32_IRQ_EXTI10_15_PRIORITY 6 +#define STM32_IRQ_EXTI1635_38_PRIORITY 6 +#define STM32_IRQ_EXTI18_PRIORITY 6 +#define STM32_IRQ_EXTI19_PRIORITY 6 +#define STM32_IRQ_EXTI20_PRIORITY 6 +#define STM32_IRQ_EXTI21_22_PRIORITY 6 + +#define STM32_IRQ_SDMMC1_PRIORITY 9 + +#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY 7 +#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY 7 +#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7 +#define STM32_IRQ_TIM1_CC_PRIORITY 7 +#define STM32_IRQ_TIM2_PRIORITY 7 +#define STM32_IRQ_TIM3_PRIORITY 7 +#define STM32_IRQ_TIM4_PRIORITY 7 +#define STM32_IRQ_TIM5_PRIORITY 7 +#define STM32_IRQ_TIM6_PRIORITY 7 +#define STM32_IRQ_TIM7_PRIORITY 7 +#define STM32_IRQ_TIM8_UP_PRIORITY 7 +#define STM32_IRQ_TIM8_CC_PRIORITY 7 + +#define STM32_IRQ_USART1_PRIORITY 12 +#define STM32_IRQ_USART2_PRIORITY 12 +#define STM32_IRQ_USART3_PRIORITY 12 +#define STM32_IRQ_UART4_PRIORITY 12 +#define STM32_IRQ_UART5_PRIORITY 12 +#define STM32_IRQ_LPUART1_PRIORITY 12 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_COMPACT_SAMPLES FALSE +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC12_IRQ_PRIORITY 5 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC123_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV2 +#define STM32_ADC_ADC123_PRESC ADC_CCR_PRESC_DIV2 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * DAC driver system settings. + */ +#define STM32_DAC_DUAL_MODE FALSE +#define STM32_DAC_USE_DAC1_CH1 FALSE +#define STM32_DAC_USE_DAC1_CH2 FALSE +#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 +#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 +#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID_ANY + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_USE_TIM15 FALSE +#define STM32_GPT_USE_TIM16 FALSE +#define STM32_GPT_USE_TIM17 FALSE + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_USE_I2C4 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_I2C_I2C4_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_I2C_I2C4_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C4_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_I2C4_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_USE_TIM15 FALSE +#define STM32_ICU_USE_TIM16 FALSE +#define STM32_ICU_USE_TIM17 FALSE + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_USE_TIM15 FALSE +#define STM32_PWM_USE_TIM16 FALSE +#define STM32_PWM_USE_TIM17 FALSE + +/* + * RTC driver system settings. + */ +#define STM32_RTC_PRESA_VALUE 32 +#define STM32_RTC_PRESS_VALUE 1024 +#define STM32_RTC_CR_INIT 0 +#define STM32_RTC_TAMPCR_INIT 0 + +/* + * SDC driver system settings. + */ +#define STM32_SDC_USE_SDMMC1 TRUE +#define STM32_SDC_SDMMC_UNALIGNED_SUPPORT TRUE +#define STM32_SDC_SDMMC_WRITE_TIMEOUT 1000000 +#define STM32_SDC_SDMMC_READ_TIMEOUT 1000000 +#define STM32_SDC_SDMMC_CLOCK_DELAY 10 +#define STM32_SDC_SDMMC_PWRSAV TRUE +#define STM32_SDC_SDMMC1_IRQ_PRIORITY 9 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 TRUE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USE_LPUART1 TRUE + +/* + * SIO driver system settings. + */ +#define STM32_SIO_USE_USART1 FALSE +#define STM32_SIO_USE_USART2 FALSE +#define STM32_SIO_USE_USART3 FALSE +#define STM32_SIO_USE_UART4 FALSE +#define STM32_SIO_USE_UART5 FALSE +#define STM32_SIO_USE_LPUART1 FALSE + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * TRNG driver system settings. + */ +#define STM32_TRNG_USE_RNG1 TRUE + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USE_UART4 FALSE +#define STM32_UART_USE_UART5 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_UART4_DMA_PRIORITY 0 +#define STM32_UART_UART5_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1 FALSE +#define STM32_USB_OTG1_IRQ_PRIORITY 14 +#define STM32_USB_OTG1_RX_FIFO_SIZE 512 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +/* + * WSPI driver system settings. + */ +#define STM32_WSPI_USE_OCTOSPI1 TRUE +#define STM32_WSPI_USE_OCTOSPI2 TRUE +#define STM32_WSPI_OCTOSPI1_PRESCALER_VALUE 1 +#define STM32_WSPI_OCTOSPI2_PRESCALER_VALUE 1 +#define STM32_WSPI_OCTOSPI1_IRQ_PRIORITY 10 +#define STM32_WSPI_OCTOSPI2_IRQ_PRIORITY 10 +#define STM32_WSPI_OCTOSPI1_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_WSPI_OCTOSPI2_DMA_STREAM STM32_DMA_STREAM_ID_ANY +#define STM32_WSPI_OCTOSPI1_DMA_PRIORITY 1 +#define STM32_WSPI_OCTOSPI2_DMA_PRIORITY 1 +#define STM32_WSPI_OCTOSPI1_DMA_IRQ_PRIORITY 10 +#define STM32_WSPI_OCTOSPI2_DMA_IRQ_PRIORITY 10 +#define STM32_WSPI_DMA_ERROR_HOOK(qspip) osalSysHalt("DMA failure") + +#endif /* MCUCONF_H */ diff --git a/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/cfg/sbconf.h b/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/cfg/sbconf.h new file mode 100644 index 000000000..cfd1a98f5 --- /dev/null +++ b/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/cfg/sbconf.h @@ -0,0 +1,57 @@ +/* + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file sb/templates/sbconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup SB_CONFIG + * @details Sandboxes-related settings and hooks. + * @{ + */ + +#ifndef SBCONF_H +#define SBCONF_H + +#define __CHIBIOS_SB_CONF__ +#define __CHIBIOS_SB_CONF_VER_3_0__ + +/** + * @brief Number of memory regions for each sandbox. + */ +#if !defined(SB_CFG_NUM_REGIONS) || defined(__DOXYGEN__) +#define SB_CFG_NUM_REGIONS 2 +#endif + +/** + * @brief Enables Posix API in sandboxes using VFS. + */ +#if !defined(SB_CFG_ENABLE_VFS) || defined(__DOXYGEN__) +#define SB_CFG_ENABLE_VFS TRUE +#endif + +/** + * @brief Number of file descriptors for each sandbox. + */ +#if !defined(SB_CFG_FD_NUM) || defined(__DOXYGEN__) +#define SB_CFG_FD_NUM 12 +#endif + +#endif /* SBCONF_H */ + +/** @} */ diff --git a/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/cfg/vfsconf.h b/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/cfg/vfsconf.h new file mode 100644 index 000000000..c11cc733f --- /dev/null +++ b/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/cfg/vfsconf.h @@ -0,0 +1,162 @@ +/* + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/vfsconf.h + * @brief VFS configuration header. + * + * @addtogroup VFS_CONF + * @{ + */ + +#ifndef VFSCONF_H +#define VFSCONF_H + +#define _CHIBIOS_VFS_CONF_ +#define _CHIBIOS_VFS_CONF_VER_1_0_ + +/*===========================================================================*/ +/** + * @name VFS general settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Maximum filename length. + */ +#if !defined(VFS_CFG_NAMELEN_MAX) || defined(__DOXYGEN__) +#define VFS_CFG_NAMELEN_MAX 15 +#endif + +/** + * @brief Maximum paths length. + */ +#if !defined(VFS_CFG_PATHLEN_MAX) || defined(__DOXYGEN__) +#define VFS_CFG_PATHLEN_MAX 1023 +#endif + +/** + * @brief Number of shared path buffers. + */ +#if !defined(VFS_CFG_PATHBUFS_NUM) || defined(__DOXYGEN__) +#define VFS_CFG_PATHBUFS_NUM 1 +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name VFS drivers + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Enables the VFS Overlay Driver. + */ +#if !defined(VFS_CFG_ENABLE_DRV_OVERLAY) || defined(__DOXYGEN__) +#define VFS_CFG_ENABLE_DRV_OVERLAY TRUE +#endif + +/** + * @brief Enables the VFS Streams Driver. + */ +#if !defined(VFS_CFG_ENABLE_DRV_STREAMS) || defined(__DOXYGEN__) +#define VFS_CFG_ENABLE_DRV_STREAMS TRUE +#endif + +/** + * @brief Enables the VFS FatFS Driver. + */ +#if !defined(VFS_CFG_ENABLE_DRV_FATFS) || defined(__DOXYGEN__) +#define VFS_CFG_ENABLE_DRV_FATFS TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Overlay driver settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Maximum number of overlay directories. + */ +#if !defined(DRV_CFG_OVERLAY_DRV_MAX) || defined(__DOXYGEN__) +#define DRV_CFG_OVERLAY_DRV_MAX 2 +#endif + +/** + * @brief Number of directory nodes pre-allocated in the pool. + */ +#if !defined(DRV_CFG_OVERLAY_NODES_NUM) || defined(__DOXYGEN__) +#define DRV_CFG_OVERLAY_DIR_NODES_NUM 1 +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Streams driver settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Number of directory nodes pre-allocated in the pool. + */ +#if !defined(DRV_CFG_STREAMS_DIR_NODES_NUM) || defined(__DOXYGEN__) +#define DRV_CFG_STREAMS_DIR_NODES_NUM 1 +#endif + +/** + * @brief Number of file nodes pre-allocated in the pool. + */ +#if !defined(DRV_CFG_STREAMS_FILE_NODES_NUM) || defined(__DOXYGEN__) +#define DRV_CFG_STREAMS_FILE_NODES_NUM 2 +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name FatFS driver settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Number of directory nodes pre-allocated in the pool. + */ +#if !defined(DRV_CFG_FATFS_DIR_NODES_NUM) || defined(__DOXYGEN__) +#define DRV_CFG_FATFS_DIR_NODES_NUM 1 +#endif + +/** + * @brief Number of file nodes pre-allocated in the pool. + */ +#if !defined(DRV_CFG_FATFS_FILE_NODES_NUM) || defined(__DOXYGEN__) +#define DRV_CFG_FATFS_FILE_NODES_NUM 2 +#endif + +/** @} */ + +#endif /* VFSCONF_H */ + +/** @} */ diff --git a/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/debug/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC (build-ch.elf)(OpenOCD, Flash and Run).launch b/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/debug/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC (build-ch.elf)(OpenOCD, Flash and Run).launch new file mode 100644 index 000000000..b52fefe1d --- /dev/null +++ b/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/debug/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC (build-ch.elf)(OpenOCD, Flash and Run).launch @@ -0,0 +1,48 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/debug/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC (build-ch.elf)(OpenOCD, Just Run).launch b/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/debug/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC (build-ch.elf)(OpenOCD, Just Run).launch new file mode 100644 index 000000000..f60bdc5c1 --- /dev/null +++ b/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/debug/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC (build-ch.elf)(OpenOCD, Just Run).launch @@ -0,0 +1,48 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/main.c b/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/main.c new file mode 100644 index 000000000..9b6e0ffa6 --- /dev/null +++ b/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/main.c @@ -0,0 +1,306 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" +#include "sb.h" +#include "chprintf.h" + +#include "rt_test_root.h" +#include "oslib_test_root.h" + +#include "nullstreams.h" + +#include "startup_defs.h" + +#include "sdmon.h" + +/*===========================================================================*/ +/* VFS-related. */ +/*===========================================================================*/ + +#if VFS_CFG_ENABLE_DRV_FATFS == TRUE +/* VFS FatFS driver used by all file systems.*/ +static vfs_fatfs_driver_c fatfs_driver; +#endif + +/* VFS overlay driver object representing the absolute root directory.*/ +static vfs_overlay_driver_c root_overlay_driver; + +/* Segregated roots for the two sandboxes.*/ +static vfs_overlay_driver_c sb1_root_overlay_driver; + +/* VFS streams driver objects representing the /dev private directories.*/ +static vfs_streams_driver_c sb1_dev_driver; + +/* VFS API will use this object as implicit root, defining this + symbol is expected.*/ +vfs_driver_c *vfs_root = (vfs_driver_c *)&root_overlay_driver; + +/* Used for /dev/null.*/ +static NullStream nullstream; + +/* Streams to be exposed under /dev as files.*/ +static const drv_streams_element_t sb1_streams[] = { + {"VSD1", (BaseSequentialStream *)&SD2}, + {"null", (BaseSequentialStream *)&nullstream}, + {NULL, NULL} +}; + +/*===========================================================================*/ +/* SB-related. */ +/*===========================================================================*/ + +/* Sandbox 1 configuration.*/ +static const sb_config_t sb_config1 = { + .code_region = 0U, + .data_region = 1U, + .regions = { + [0] = { + .area = {STARTUP_FLASH1_BASE, STARTUP_FLASH1_SIZE}, + .writeable = false + }, + [1] = { + .area = {STARTUP_RAM1_BASE, STARTUP_RAM1_SIZE}, + .writeable = true + } + }, + .mpuregs = { + [0] = { + (uint32_t)STARTUP_RAM1_BASE, MPU_RASR_ATTR_AP_RW_RW | + MPU_RASR_ATTR_CACHEABLE_WB_WA | + MPU_RASR_SIZE_128K | + MPU_RASR_ENABLE + }, + [1] = { + (uint32_t)0, (uint32_t)0 + } + }, + .vfs_driver = (vfs_driver_c *)&sb1_root_overlay_driver +}; + +/* Sandbox objects.*/ +sb_class_t sbx1; + +static THD_WORKING_AREA(waUnprivileged1, 1024); + +static thread_t *sb1tp; + +/*===========================================================================*/ +/* Main and generic code. */ +/*===========================================================================*/ + +/* + * Green LED blinker thread, times are in milliseconds. + */ +static THD_WORKING_AREA(waThread1, 256); +static THD_FUNCTION(Thread1, arg) { + + (void)arg; + + chRegSetThreadName("blinker"); + while (true) { + palToggleLine(LINE_LED_GREEN); + chThdSleepMilliseconds(sdmon_ready ? 250 : 500); + } +} + +/* + * SB termination event. + */ +static void SBHandler(eventid_t id) { + + (void)id; + + if (chThdTerminatedX(sb1tp)) { + chprintf((BaseSequentialStream *)&SD2, "SB1 terminated\r\n"); + } +} + +/* + * Application entry point. + */ +int main(void) { + event_listener_t elsb; + vfs_node_c *np; + msg_t ret; + static const evhandler_t evhndl[] = { + sdmonInsertHandler, + sdmonRemoveHandler, + SBHandler + }; + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + * - Virtual File System initialization. + * - SandBox manager initialization. + */ + halInit(); + chSysInit(); + vfsInit(); + sbHostInit(); + + /* + * Starting a serial ports for I/O, initializing other streams too. + */ + sdStart(&SD2, NULL); + nullObjectInit(&nullstream); + + /* + * Activates the card insertion monitor. + */ + sdmonInit(); + + /* + * Creating a blinker thread. + */ + chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO+10, Thread1, NULL); + + /* + * Initializing an overlay VFS object as a root on top of a FatFS driver. + * This is accessible from kernel space and covers the whole file system. + */ + drvFatFSObjectInit(&fatfs_driver); + drvOverlayObjectInit(&root_overlay_driver, (vfs_driver_c *)&fatfs_driver, NULL); + + /* + * Initializing overlay drivers for the two sandbox roots. Those also use + * the FatFS driver but are restricted to "/sb1" and "/sb2" directories. + */ + drvOverlayObjectInit(&sb1_root_overlay_driver, (vfs_driver_c *)&fatfs_driver, "/sb1"); +// drvOverlayObjectInit(&sb2_root_overlay_driver, (vfs_driver_c *)&fatfs_driver, "/sb2"); + ret = drvOverlayRegisterDriver(&sb1_root_overlay_driver, + drvStreamsObjectInit(&sb1_dev_driver, &sb1_streams[0]), + "dev"); + if (CH_RET_IS_ERROR(ret)) { + chSysHalt("VFS"); + } +// ret = drvOverlayRegisterDriver(&sb2_root_overlay_driver, +// drvStreamsObjectInit(&sb2_dev_driver, &sb2_streams[0]), +// "dev"); +// if (CH_RET_IS_ERROR(ret)) { +// chSysHalt("VFS"); +// } + + /* + * Initializing overlay driver for the directory shared among the sandboxes. + * It is seen as "/shared". + */ +#if 0 + drvOverlayObjectInit(&sb_shared_overlay_driver, (vfs_driver_c *)&fatfs_driver, "/shared"); + ret = drvOverlayRegisterDriver(&sb1_root_overlay_driver, + (vfs_driver_c *)&sb_shared_overlay_driver, + "shared"); + if (CH_RET_IS_ERROR(ret)) { + chSysHalt("VFS"); + } + ret = drvOverlayRegisterDriver(&sb2_root_overlay_driver, + (vfs_driver_c *)&sb_shared_overlay_driver, + "shared"); + if (CH_RET_IS_ERROR(ret)) { + chSysHalt("VFS"); + } +#endif + + /* + * Sandbox objects initialization. + */ + sbObjectInit(&sbx1, &sb_config1); +// sbObjectInit(&sbx2, &sb_config2); + + /* + * Associating standard input, output and error to sandbox 1. + */ + ret = vfsDrvOpen((vfs_driver_c *)&sb1_root_overlay_driver, + "/dev/VSD1", VO_RDWR, &np); + if (CH_RET_IS_ERROR(ret)) { + chSysHalt("VFS"); + } + sbPosixRegisterDescriptor(&sbx1, STDIN_FILENO, (vfs_node_c *)roAddRef(np)); + sbPosixRegisterDescriptor(&sbx1, STDOUT_FILENO, (vfs_node_c *)roAddRef(np)); + sbPosixRegisterDescriptor(&sbx1, STDERR_FILENO, (vfs_node_c *)roAddRef(np)); + vfsClose(np); + +#if 0 + /* + * Associating standard input, output and error to sandbox 1. + */ + ret = vfsDrvOpen((vfs_driver_c *)&sb2_root_overlay_driver, + "/dev/VSD1", VO_RDWR, &np); + if (CH_RET_IS_ERROR(ret)) { + chSysHalt("VFS"); + } + sbPosixRegisterDescriptor(&sbx2, STDIN_FILENO, (vfs_node_c *)roAddRef(np)); + sbPosixRegisterDescriptor(&sbx2, STDOUT_FILENO, (vfs_node_c *)roAddRef(np)); + sbPosixRegisterDescriptor(&sbx2, STDERR_FILENO, (vfs_node_c *)roAddRef(np)); + vfsClose(np); +#endif + + /* Starting sandboxed thread 1.*/ + sb1tp = sbStartThread(&sbx1, "sbx1", + waUnprivileged1, sizeof (waUnprivileged1), + NORMALPRIO - 1); + if (sb1tp == NULL) { + chSysHalt("sbx1 failed"); + } + +#if 0 + /* Starting sandboxed thread 2.*/ + sb2tp = sbStartThread(&sbx2, "sbx2", + waUnprivileged2, sizeof (waUnprivileged2), + NORMALPRIO - 1); + if (sb2tp == NULL) { + chSysHalt("sbx2 failed"); + } +#endif + + /* + * Listening to sandbox events. + */ + chEvtRegister(&sb.termination_es, &elsb, (eventid_t)2); + + /* + * Normal main() thread activity, in this demo it monitors the user button + * and checks for sandboxes state. + */ + while (true) { + chEvtDispatch(evhndl, chEvtWaitOneTimeout(ALL_EVENTS, TIME_MS2I(500))); + + /* Checking for user button, launching sandbox if pressed.*/ + if (palReadLine(LINE_BUTTON)) { + if (!sbIsThreadRunningX(&sbx1)) { + ret = sbElfLoadFile((vfs_driver_c *)&sb1_root_overlay_driver, + "/bin/app.elf", + &sbx1.config->regions[0].area); + if (CH_RET_IS_ERROR(ret)) { + chSysHalt("ELF"); + } + } +#if 0 + static uint8_t loadbuf[1024]; + static memory_area_t ma = {loadbuf, sizeof (loadbuf)}; + ret = sbElfLoadFile((vfs_driver_c *)&sb1_root_overlay_driver, "/bin/app.elf", &ma); + if (CH_RET_IS_ERROR(ret)) { + chSysHalt("ELF"); + } +#endif + } + } +} diff --git a/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/source/sdmon.c b/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/source/sdmon.c new file mode 100644 index 000000000..43dd1045c --- /dev/null +++ b/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/source/sdmon.c @@ -0,0 +1,151 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" +#include "vfs.h" + +/*===========================================================================*/ +/* Module local definitions. */ +/*===========================================================================*/ + +#define POLLING_INTERVAL 10 +#define POLLING_DELAY 10 + +/*===========================================================================*/ +/* Module exported variables. */ +/*===========================================================================*/ + +event_source_t sdmon_inserted_event, sdmon_removed_event; +bool sdmon_ready; + +/*===========================================================================*/ +/* Module local types. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Module local variables. */ +/*===========================================================================*/ + +static virtual_timer_t tmr; +static unsigned cnt; + +/*===========================================================================*/ +/* Module local functions. */ +/*===========================================================================*/ + +/** + * @brief Insertion monitor timer callback function. + * + * @param[in] p pointer to the @p BaseBlockDevice object + * + * @notapi + */ +static void tmrfunc(virtual_timer_t *vtp, void *p) { + BaseBlockDevice *bbdp = p; + + chSysLockFromISR(); + + if (cnt > 0) { + if (blkIsInserted(bbdp)) { + if (--cnt == 0) { + chEvtBroadcastI(&sdmon_inserted_event); + } + } + else + cnt = POLLING_INTERVAL; + } + else { + if (!blkIsInserted(bbdp)) { + cnt = POLLING_INTERVAL; + chEvtBroadcastI(&sdmon_removed_event); + } + } + chVTSetI(vtp, TIME_MS2I(POLLING_DELAY), tmrfunc, bbdp); + + chSysUnlockFromISR(); +} + +/*===========================================================================*/ +/* Module exported functions. */ +/*===========================================================================*/ + +/** + * @brief Polling monitor start. + * + * @notapi + */ +void sdmonInit(void) { + static event_listener_t el0, el1; + + /* Activates the SDC driver using default configuration.*/ + sdcStart(&SDCD1, NULL); + + chEvtObjectInit(&sdmon_inserted_event); + chEvtObjectInit(&sdmon_removed_event); + + chEvtRegister(&sdmon_inserted_event, &el0, (eventid_t)0); + chEvtRegister(&sdmon_removed_event, &el1, (eventid_t)1); + + sdmon_ready = false; + cnt = POLLING_INTERVAL; + chVTSet(&tmr, TIME_MS2I(POLLING_DELAY), tmrfunc, (void *)&SDCD1); +} + +/* + * Card insertion event. + */ +void sdmonInsertHandler(eventid_t id) { + msg_t err; + + (void)id; + +#if HAL_USE_SDC + if (sdcConnect(&SDCD1)) { + return; + } +#else + if (mmcConnect(&MMCD1)) { + return; + } +#endif + + err = drvFatFSMount("0:", 1); + if (CH_RET_IS_ERROR(err)) { +#if HAL_USE_SDC + sdcDisconnect(&SDCD1); +#else + if (mmcDisconnect(&MMCD1)) { +#endif + return; + } + sdmon_ready = true; +} + +/* + * Card removal event. + */ +void sdmonRemoveHandler(eventid_t id) { + + (void)id; + +#if HAL_USE_SDC + sdcDisconnect(&SDCD1); +#else + mmcDisconnect(&MMCD1); +#endif + sdmon_ready = false; +} diff --git a/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/source/sdmon.h b/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/source/sdmon.h new file mode 100644 index 000000000..b22f16979 --- /dev/null +++ b/demos/STM32/RT-STM32L4R9-DISCOVERY-RAM_SB_HOST_DYNAMIC/source/sdmon.h @@ -0,0 +1,63 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef SDMON_H +#define SDMON_H + +/*===========================================================================*/ +/* Module constants. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Module pre-compile time settings. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Derived constants and error checks. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Module data structures and types. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Module macros. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* External declarations. */ +/*===========================================================================*/ + +extern event_source_t sdmon_inserted_event, sdmon_removed_event; +extern bool sdmon_ready; + +#ifdef __cplusplus +extern "C" { +#endif + void sdmonInit(void); + void sdmonInsertHandler(eventid_t id); + void sdmonRemoveHandler(eventid_t id); +#ifdef __cplusplus +} +#endif + +/*===========================================================================*/ +/* External declarations. */ +/*===========================================================================*/ + +#endif /* SDMON_H */ + +/** @} */ diff --git a/os/sb/host/sbelf.c b/os/sb/host/sbelf.c index 62a9c8dc4..9207ccc29 100644 --- a/os/sb/host/sbelf.c +++ b/os/sb/host/sbelf.c @@ -94,7 +94,7 @@ typedef struct { */ typedef struct elf_load_context { vfs_file_node_c *fnp; - memory_area_t *map; + const memory_area_t *map; uint8_t *next; uint32_t entry; @@ -430,7 +430,7 @@ static msg_t load_relocate_section(elf_load_context_t *ctxp, static msg_t init_elf_context(elf_load_context_t *ctxp, vfs_file_node_c *fnp, - memory_area_t *map) { + const memory_area_t *map) { static uint8_t elf32_header[16] = { 0x7f, 0x45, 0x4c, 0x46, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 @@ -471,7 +471,7 @@ static msg_t init_elf_context(elf_load_context_t *ctxp, /* Module exported functions. */ /*===========================================================================*/ -msg_t sbElfLoad(vfs_file_node_c *fnp, memory_area_t *map) { +msg_t sbElfLoad(vfs_file_node_c *fnp, const memory_area_t *map) { msg_t ret; do { @@ -582,7 +582,9 @@ msg_t sbElfLoad(vfs_file_node_c *fnp, memory_area_t *map) { return ret; } -msg_t sbElfLoadFile(vfs_driver_c *drvp, const char *path, memory_area_t *map) { +msg_t sbElfLoadFile(vfs_driver_c *drvp, + const char *path, + const memory_area_t *map) { vfs_file_node_c *fnp; msg_t ret; diff --git a/os/sb/host/sbelf.h b/os/sb/host/sbelf.h index 773b07f11..62ca61c9e 100644 --- a/os/sb/host/sbelf.h +++ b/os/sb/host/sbelf.h @@ -57,8 +57,11 @@ #ifdef __cplusplus extern "C" { #endif - msg_t sbElfLoad(vfs_file_node_c *fnp, memory_area_t *map); - msg_t sbElfLoadFile(vfs_driver_c *drvp, const char *path, memory_area_t *map); + msg_t sbElfLoad(vfs_file_node_c *fnp, + const memory_area_t *map); + msg_t sbElfLoadFile(vfs_driver_c *drvp, + const char *path, + const memory_area_t *map); #ifdef __cplusplus } #endif diff --git a/os/sb/host/sbhost.c b/os/sb/host/sbhost.c index fdcd4a0e4..be7b46ce0 100644 --- a/os/sb/host/sbhost.c +++ b/os/sb/host/sbhost.c @@ -172,6 +172,50 @@ thread_t *sbStartThread(sb_class_t *sbcp, const char *name, return utp; } +/** + * @brief Verifies if the sandbox thread is running. + * + * @param[in] sbcp pointer to a @p sb_class_t structure + * @return The thread status. + * + * @api + */ +bool sbIsThreadRunningX(sb_class_t *sbcp) { + + if (sbcp->tp == NULL) { + return false; + } + + return chThdTerminatedX(sbcp->tp); +} + +#if (CH_CFG_USE_WAITEXIT == TRUE) || defined(__DOXYGEN__) +/** + * @brief Blocks the execution of the invoking thread until the specified + * sandbox thread terminates then the exit code is returned. + * @pre The configuration option @p CH_CFG_USE_WAITEXIT must be enabled in + * order to use this function. + * + * @param[in] sbcp pointer to a @p sb_class_t structure + * @return The exit code from the terminated sandbox thread. + * @retval MSG_RESET Sandbox thread not started. + * + * @api + */ +msg_t sbWaitThread(sb_class_t *sbcp) { + msg_t msg; + + if (sbcp->tp == NULL) { + return MSG_RESET; + } + + msg = chThdWait(sbcp->tp); + sbcp->tp = NULL; + + return msg; +} +#endif + #if (CH_CFG_USE_MESSAGES == TRUE) || defined(__DOXYGEN__) /** * @brief Sends a message to a sandboxed thread. diff --git a/os/sb/host/sbhost.h b/os/sb/host/sbhost.h index d25bc34cb..af17fd36f 100644 --- a/os/sb/host/sbhost.h +++ b/os/sb/host/sbhost.h @@ -95,9 +95,15 @@ extern "C" { thread_t *sbStartThread(sb_class_t *sbcp, const char *name, void *wsp, size_t size, tprio_t prio); + bool sbIsThreadRunningX(sb_class_t *sbcp); +#if CH_CFG_USE_WAITEXIT == TRUE + msg_t sbWaitThread(sb_class_t *sbcp); +#endif +#if CH_CFG_USE_MESSAGES == TRUE msg_t sbSendMessageTimeout(sb_class_t *sbcp, msg_t msg, sysinterval_t timeout); +#endif #ifdef __cplusplus } #endif @@ -118,24 +124,6 @@ static inline void sbHostInit(void) { #endif } -#if (CH_CFG_USE_WAITEXIT == TRUE) || defined(__DOXYGEN__) -/** - * @brief Blocks the execution of the invoking thread until the sandbox - * thread terminates then the exit code is returned. - * @pre The configuration option @p CH_CFG_USE_WAITEXIT must be enabled in - * order to use this function. - * - * @param[in] sbcp pointer to the sandbox object - * @return The exit code from the terminated thread. - * - * @api - */ -static inline msg_t sbWait(sb_class_t *sbcp) { - - return chThdWait(sbcp->tp); -} -#endif /* CH_CFG_USE_WAITEXIT == TRUE */ - #if (CH_CFG_USE_MESSAGES == TRUE) || defined(__DOXYGEN__) /** * @brief Sends a message to a sandboxed thread.