git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@1054 35acf78f-673a-0410-8e92-d51de3d6d3f4
This commit is contained in:
gdisirio
parent
ffd4f37b45
commit
40b2d98d86
|
|
@ -0,0 +1,60 @@
|
||||||
|
/*
|
||||||
|
ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio.
|
||||||
|
|
||||||
|
This file is part of ChibiOS/RT.
|
||||||
|
|
||||||
|
ChibiOS/RT is free software; you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation; either version 3 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
ChibiOS/RT is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @file ports/ARM7-LPC214x/pal_lld.c
|
||||||
|
* @brief LPC214x FIO low level driver code
|
||||||
|
* @addtogroup LPC214x_PAL
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <ch.h>
|
||||||
|
#include <pal.h>
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief LPC214x I/O ports configuration.
|
||||||
|
* @details Ports A-D clocks enabled, AFIO clock enabled.
|
||||||
|
*
|
||||||
|
* @param[in] config the LPC214x ports configuration
|
||||||
|
*/
|
||||||
|
void _pal_lld_init(const LPC214xFIOConfig *config) {
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Pads mode setup.
|
||||||
|
* @details This function programs a pads group belonging to the same port
|
||||||
|
* with the specified mode.
|
||||||
|
*
|
||||||
|
* @param[in] port the port identifier
|
||||||
|
* @param[in] mask the group mask
|
||||||
|
* @param[in] mode the mode
|
||||||
|
*
|
||||||
|
* @note This function is not meant to be invoked directly by the application
|
||||||
|
* code.
|
||||||
|
* @note @p PAL_MODE_UNCONNECTED is implemented as push pull output.
|
||||||
|
* @note Writing on pads programmed as pull-up or pull-down has the side
|
||||||
|
* effect to modify the resistor setting because the output latched data
|
||||||
|
* is used for the resistor selection.
|
||||||
|
*/
|
||||||
|
void _pal_lld_setgroupmode(ioportid_t port,
|
||||||
|
ioportmask_t mask,
|
||||||
|
uint_fast8_t mode) {
|
||||||
|
}
|
||||||
|
|
||||||
|
/** @} */
|
||||||
|
|
@ -19,7 +19,7 @@
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* @file ports/ARM7-LPC214x/pal_lld.h
|
* @file ports/ARM7-LPC214x/pal_lld.h
|
||||||
* @brief LPC214x FIO low level driver
|
* @brief LPC214x FIO low level driver header
|
||||||
* @addtogroup LPC214x_PAL
|
* @addtogroup LPC214x_PAL
|
||||||
* @{
|
* @{
|
||||||
*/
|
*/
|
||||||
|
|
@ -31,10 +31,32 @@
|
||||||
#include "lpc214x.h"
|
#include "lpc214x.h"
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
/*===========================================================================*/
|
||||||
|
/* Unsupported modes and specific modes */
|
||||||
|
/*===========================================================================*/
|
||||||
|
|
||||||
|
#undef PAL_MODE_INPUT_PULLUP
|
||||||
|
#undef PAL_MODE_INPUT_PULLDOWN
|
||||||
|
#undef PAL_MODE_OUTPUT_OPENDRAIN
|
||||||
|
|
||||||
/*===========================================================================*/
|
/*===========================================================================*/
|
||||||
/* I/O Ports Types and constants. */
|
/* I/O Ports Types and constants. */
|
||||||
/*===========================================================================*/
|
/*===========================================================================*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief LPC214x FIO static initializer.
|
||||||
|
* @details An instance of this structure must be passed to @p palInit() at
|
||||||
|
* system startup time in order to initialized the digital I/O
|
||||||
|
* subsystem. This represents only the initial setup, specific pads
|
||||||
|
* or whole ports can be reprogrammed at later time.
|
||||||
|
*/
|
||||||
|
typedef struct {
|
||||||
|
/** @brief Port 0 setup data.*/
|
||||||
|
ioportmask_t P0Data;
|
||||||
|
/** @brief Port 1 setup data.*/
|
||||||
|
ioportmask_t P1Data;
|
||||||
|
} LPC214xFIOConfig;
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* @brief Width, in bits, of an I/O port.
|
* @brief Width, in bits, of an I/O port.
|
||||||
*/
|
*/
|
||||||
|
|
@ -183,6 +205,17 @@ typedef FIO * ioportid_t;
|
||||||
(port)->FIO_DIR = (dir); \
|
(port)->FIO_DIR = (dir); \
|
||||||
}
|
}
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
void _pal_lld_init(const LPC214xFIOConfig *config);
|
||||||
|
void _pal_lld_setgroupmode(ioportid_t port,
|
||||||
|
ioportmask_t mask,
|
||||||
|
uint_fast8_t mode);
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
#endif /* _PAL_LLD_H_ */
|
#endif /* _PAL_LLD_H_ */
|
||||||
|
|
||||||
/** @} */
|
/** @} */
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,164 @@
|
||||||
|
/*
|
||||||
|
ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio.
|
||||||
|
|
||||||
|
This file is part of ChibiOS/RT.
|
||||||
|
|
||||||
|
ChibiOS/RT is free software; you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation; either version 3 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
ChibiOS/RT is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @file ports/ARMCM3-STM32F103/pal_lld.c
|
||||||
|
* @brief STM32 GPIO low level driver code
|
||||||
|
* @addtogroup STM32F103_PAL
|
||||||
|
* @{
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <ch.h>
|
||||||
|
#include <pal.h>
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief STM32 I/O ports configuration.
|
||||||
|
* @details Ports A-D clocks enabled, AFIO clock enabled.
|
||||||
|
*
|
||||||
|
* @param[in] config the STM32 ports configuration
|
||||||
|
*/
|
||||||
|
void _pal_lld_init(const STM32GPIOConfig *config) {
|
||||||
|
uint32_t clocks = RCC_APB2ENR_AFIOEN;
|
||||||
|
|
||||||
|
#if defined(_GPIOA)
|
||||||
|
clocks |= RCC_APB2ENR_IOPAEN;
|
||||||
|
#endif
|
||||||
|
#if defined(_GPIOB)
|
||||||
|
clocks |= RCC_APB2ENR_IOPBEN;
|
||||||
|
#endif
|
||||||
|
#if defined(_GPIOC)
|
||||||
|
clocks |= RCC_APB2ENR_IOPCEN;
|
||||||
|
#endif
|
||||||
|
#if defined(_GPIOD)
|
||||||
|
clocks |= RCC_APB2ENR_IOPDEN;
|
||||||
|
#endif
|
||||||
|
#if defined(_GPIOE)
|
||||||
|
clocks |= RCC_APB2ENR_IOPEEN;
|
||||||
|
#endif
|
||||||
|
RCC->APB2ENR |= clocks;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Resets the GPIO ports and AFIO.
|
||||||
|
*/
|
||||||
|
RCC->APB2RSTR = RCC_APB2RSTR_IOPARST | RCC_APB2RSTR_IOPBRST |
|
||||||
|
RCC_APB2RSTR_IOPCRST | RCC_APB2RSTR_IOPDRST |
|
||||||
|
RCC_APB2RSTR_IOPERST | RCC_APB2RSTR_IOPFRST |
|
||||||
|
RCC_APB2RSTR_IOPGRST | RCC_APB2RSTR_AFIORST;
|
||||||
|
RCC->APB2RSTR = 0;
|
||||||
|
|
||||||
|
#if defined(_GPIOA)
|
||||||
|
IOPORT_A->ODR = config->PAData.odr;
|
||||||
|
IOPORT_A->CRH = config->PAData.crh;
|
||||||
|
IOPORT_A->CRL = config->PAData.crl;
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if defined(_GPIOB)
|
||||||
|
IOPORT_B->ODR = config->PBData.odr;
|
||||||
|
IOPORT_B->CRH = config->PBData.crh;
|
||||||
|
IOPORT_B->CRL = config->PBData.crl;
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if defined(_GPIOC)
|
||||||
|
IOPORT_C->ODR = config->PCData.odr;
|
||||||
|
IOPORT_C->CRH = config->PCData.crh;
|
||||||
|
IOPORT_C->CRL = config->PCData.crl;
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if defined(_GPIOD)
|
||||||
|
IOPORT_D->ODR = config->PDData.odr;
|
||||||
|
IOPORT_D->CRH = config->PDData.crh;
|
||||||
|
IOPORT_D->CRL = config->PDData.crl;
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if defined(_GPIOE)
|
||||||
|
IOPORT_E->ODR = config->PEData.odr;
|
||||||
|
IOPORT_E->CRH = config->PEData.crh;
|
||||||
|
IOPORT_E->CRL = config->PEData.crl;
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if defined(_GPIOF)
|
||||||
|
IOPORT_F->ODR = config->PFData.odr;
|
||||||
|
IOPORT_F->CRH = config->PFData.crh;
|
||||||
|
IOPORT_F->CRL = config->PFData.crl;
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if defined(_GPIOG)
|
||||||
|
IOPORT_G->ODR = config->PGData.odr;
|
||||||
|
IOPORT_G->CRH = config->PGData.crh;
|
||||||
|
IOPORT_G->CRL = config->PGData.crl;
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Pads mode setup.
|
||||||
|
* @details This function programs a pads group belonging to the same port
|
||||||
|
* with the specified mode.
|
||||||
|
*
|
||||||
|
* @param[in] port the port identifier
|
||||||
|
* @param[in] mask the group mask
|
||||||
|
* @param[in] mode the mode
|
||||||
|
*
|
||||||
|
* @note This function is not meant to be invoked directly by the application
|
||||||
|
* code.
|
||||||
|
* @note @p PAL_MODE_UNCONNECTED is implemented as push pull output at 2MHz.
|
||||||
|
* @note Writing on pads programmed as pull-up or pull-down has the side
|
||||||
|
* effect to modify the resistor setting because the output latched data
|
||||||
|
* is used for the resistor selection.
|
||||||
|
*/
|
||||||
|
void _pal_lld_setgroupmode(ioportid_t port,
|
||||||
|
ioportmask_t mask,
|
||||||
|
uint_fast8_t mode) {
|
||||||
|
static const uint8_t cfgtab[] = {
|
||||||
|
4, /* PAL_MODE_RESET, implemented as input.*/
|
||||||
|
2, /* PAL_MODE_UNCONNECTED, implemented as push pull output 2MHz.*/
|
||||||
|
4, /* PAL_MODE_INPUT */
|
||||||
|
8, /* PAL_MODE_INPUT_PULLUP */
|
||||||
|
8, /* PAL_MODE_INPUT_PULLDOWN */
|
||||||
|
3, /* PAL_MODE_OUTPUT_PUSHPULL, 50MHz.*/
|
||||||
|
7, /* PAL_MODE_OUTPUT_OPENDRAIN, 50MHz.*/
|
||||||
|
};
|
||||||
|
uint32_t mh, ml, crh, crl, cfg;
|
||||||
|
unsigned i;
|
||||||
|
|
||||||
|
if (mode == PAL_MODE_INPUT_PULLUP)
|
||||||
|
port->BSRR = mask;
|
||||||
|
else if (mode == PAL_MODE_INPUT_PULLDOWN)
|
||||||
|
port->BRR = mask;
|
||||||
|
cfg = cfgtab[mode];
|
||||||
|
mh = ml = crh = crl = 0;
|
||||||
|
for (i = 0; i < 8; i++) {
|
||||||
|
ml <<= 4;
|
||||||
|
mh <<= 4;
|
||||||
|
crl <<= 4;
|
||||||
|
crh <<= 4;
|
||||||
|
if ((mask & 1) == 0)
|
||||||
|
ml |= 0xf;
|
||||||
|
else
|
||||||
|
crl |= cfg;
|
||||||
|
if ((mask & 0x10000) == 0)
|
||||||
|
mh |= 0xf;
|
||||||
|
else
|
||||||
|
crh |= cfg;
|
||||||
|
mask >>= 1;
|
||||||
|
}
|
||||||
|
port->CRH = (port->CRH & mh) | crh;
|
||||||
|
port->CRL = (port->CRL & ml) | crl;
|
||||||
|
}
|
||||||
|
|
||||||
|
/** @} */
|
||||||
|
|
@ -27,6 +27,10 @@
|
||||||
#ifndef _PAL_LLD_H_
|
#ifndef _PAL_LLD_H_
|
||||||
#define _PAL_LLD_H_
|
#define _PAL_LLD_H_
|
||||||
|
|
||||||
|
/*===========================================================================*/
|
||||||
|
/* Unsupported modes and specific modes */
|
||||||
|
/*===========================================================================*/
|
||||||
|
|
||||||
/*===========================================================================*/
|
/*===========================================================================*/
|
||||||
/* I/O Ports Types and constants. */
|
/* I/O Ports Types and constants. */
|
||||||
/*===========================================================================*/
|
/*===========================================================================*/
|
||||||
|
|
@ -313,17 +317,6 @@ typedef uint32_t ioportid_t;
|
||||||
*/
|
*/
|
||||||
#define pal_lld_setpadmode(port, pad, mode)
|
#define pal_lld_setpadmode(port, pad, mode)
|
||||||
|
|
||||||
#ifdef __cplusplus
|
|
||||||
extern "C" {
|
|
||||||
#endif
|
|
||||||
ioportmask_t palReadBus(IOBus *bus);
|
|
||||||
void palWriteBus(IOBus *bus, ioportmask_t bits);
|
|
||||||
void palSetBusMode(IOBus *bus, uint_fast8_t mode);
|
|
||||||
#ifdef __cplusplus
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
|
|
||||||
#endif /* _PAL_LLD_H_ */
|
#endif /* _PAL_LLD_H_ */
|
||||||
|
|
||||||
/** @} */
|
/** @} */
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue