From 4fb21e032efb6898b89328daa3d6e4c0d4b6bbef Mon Sep 17 00:00:00 2001 From: gdisirio Date: Wed, 6 Feb 2008 14:41:28 +0000 Subject: [PATCH] git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@190 35acf78f-673a-0410-8e92-d51de3d6d3f4 --- demos/ARM7-AT91SAM7X-GCC/Makefile | 197 ++ .../ARM7-AT91SAM7X-GCC/at91lib/AT91SAM7X256.h | 2918 +++++++++++++++++ demos/ARM7-AT91SAM7X-GCC/board.c | 25 + demos/ARM7-AT91SAM7X-GCC/board.h | 26 + demos/ARM7-AT91SAM7X-GCC/ch.ld | 87 + demos/ARM7-AT91SAM7X-GCC/chconf.h | 169 + demos/ARM7-AT91SAM7X-GCC/main.c | 39 + demos/ARM7-AT91SAM7X-GCC/readme.txt | 26 + ports/ARM7-AT91SAM7X/GCC/chcore.c | 235 ++ ports/ARM7-AT91SAM7X/GCC/chcore.h | 129 + ports/ARM7-AT91SAM7X/GCC/chtypes.h | 47 + ports/ARM7-AT91SAM7X/GCC/crt0.s | 178 + readme.txt | 3 + 13 files changed, 4079 insertions(+) create mode 100644 demos/ARM7-AT91SAM7X-GCC/Makefile create mode 100644 demos/ARM7-AT91SAM7X-GCC/at91lib/AT91SAM7X256.h create mode 100644 demos/ARM7-AT91SAM7X-GCC/board.c create mode 100644 demos/ARM7-AT91SAM7X-GCC/board.h create mode 100644 demos/ARM7-AT91SAM7X-GCC/ch.ld create mode 100644 demos/ARM7-AT91SAM7X-GCC/chconf.h create mode 100644 demos/ARM7-AT91SAM7X-GCC/main.c create mode 100644 demos/ARM7-AT91SAM7X-GCC/readme.txt create mode 100644 ports/ARM7-AT91SAM7X/GCC/chcore.c create mode 100644 ports/ARM7-AT91SAM7X/GCC/chcore.h create mode 100644 ports/ARM7-AT91SAM7X/GCC/chtypes.h create mode 100644 ports/ARM7-AT91SAM7X/GCC/crt0.s diff --git a/demos/ARM7-AT91SAM7X-GCC/Makefile b/demos/ARM7-AT91SAM7X-GCC/Makefile new file mode 100644 index 000000000..87f1db472 --- /dev/null +++ b/demos/ARM7-AT91SAM7X-GCC/Makefile @@ -0,0 +1,197 @@ +# +# !!!! Do NOT edit this makefile with an editor which replace tabs by spaces !!!! +# +############################################################################################## +# +# On command line: +# +# make all = Create project +# +# make clean = Clean project files. +# +# To rebuild project do "make clean" and "make all". +# + +############################################################################################## +# Start of default section +# + +TRGT = arm-elf- +CC = $(TRGT)gcc +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +MCU = arm7tdmi + +# List all default C defines here, like -D_DEBUG=1 +DDEFS = + +# List all default ASM defines here, like -D_DEBUG=1 +DADEFS = + +# List all default directories to look for include files here +DINCDIR = + +# List the default directory to look for the libraries here +DLIBDIR = + +# List all default libraries here +DLIBS = + +# +# End of default section +############################################################################################## + +############################################################################################## +# Start of user section +# + +# Define project name here +PROJECT = ch + +# Define linker script file here +LDSCRIPT= ch.ld + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List ARM-mode C source files here +ASRC = \ + ../../src/chinit.c ../../src/chdebug.c ../../src/chlists.c ../../src/chdelta.c \ + ../../src/chschd.c ../../src/chthreads.c ../../src/chsem.c ../../src/chmtx.c \ + ../../src/chevents.c ../../src/chmsg.c ../../src/chsleep.c ../../src/chqueues.c \ + ../../src/chserial.c \ + ../../src/lib/evtimer.c ../../test/test.c \ + board.c main.c + +# List THUMB-mode C sources here +# NOTE: If any module is compiled in thumb mode then -mthumb-interwork is +# enabled for all modules and that lowers performance. +TSRC = + +# List ASM source files here +ASMSRC = ../../ports/ARM7-AT91SAM7X/GCC/crt0.s + +# List all user directories here +UINCDIR = ../../src/include ../../src/lib ../../ports/ARM7-AT91SAM7X/GCC + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -D THUMB + +# Common options here +# NOTE: -ffixed-r7 is only needed if you enabled CH_CURRP_REGISTER_CACHE in +# chconf.h. +# NOTE: -falign-functions=16 may improve the performance, not always, but +# increases the code size. +OPT = -O2 -ggdb -fomit-frame-pointer -fno-strict-aliasing +#OPT += -ffixed-r7 +OPT += -falign-functions=16 + +# Define warning options here +WARN = -Wall -Wstrict-prototypes + +# +# End of user defines +############################################################################################## + +INCDIR = $(patsubst %,-I%,$(DINCDIR) $(UINCDIR)) +LIBDIR = $(patsubst %,-L%,$(DLIBDIR) $(ULIBDIR)) +DEFS = $(DDEFS) $(UDEFS) +ADEFS = $(DADEFS) $(UADEFS) +AOBJS = $(ASRC:.c=.o) +TOBJS = $(TSRC:.c=.o) +OBJS = $(ASMOBJS) $(AOBJS) $(TOBJS) +ASMOBJS = $(ASMSRC:.s=.o) +LIBS = $(DLIBS) $(ULIBS) +MCFLAGS = -mcpu=$(MCU) + +ASFLAGS = $(MCFLAGS) -Wa,-amhls=$(<:.s=.lst) $(ADEFS) +CPFLAGS = $(MCFLAGS) $(OPT) $(WARN) -Wa,-alms=$(<:.c=.lst) $(DEFS) +LDFLAGS = $(MCFLAGS) -nostartfiles -T$(LDSCRIPT) -Wl,-Map=$(PROJECT).map,--cref,--no-warn-mismatch $(LIBDIR) +ODFLAGS = -x --syms + +# Thumb interwork enabled only if needed because it kills performance. +ifneq ($(TSRC),) + CPFLAGS += -D THUMB_PRESENT + ifneq ($(ASRC),) + # Mixed ARM and THUMB case. + CPFLAGS += -mthumb-interwork + LDFLAGS += -mthumb-interwork + else + # Pure THUMB case, THUMB C code cannot be called by ARM asm code directly. + CPFLAGS += -D THUMB_NO_INTERWORKING + LDFLAGS += -mthumb + ASFLAGS += -D THUMB_NO_INTERWORKING + endif +endif + +# Generate dependency information +CPFLAGS += -MD -MP -MF .dep/$(@F).d + +# +# Makefile rules +# + +all: $(OBJS) $(PROJECT).elf $(PROJECT).hex $(PROJECT).bin $(PROJECT).dmp + +$(AOBJS) : %.o : %.c + @echo + $(CC) -c $(CPFLAGS) $(AOPT) -I . $(INCDIR) $< -o $@ + +$(TOBJS) : %.o : %.c + @echo + $(CC) -c $(CPFLAGS) $(TOPT) -I . $(INCDIR) $< -o $@ + +$(ASMOBJS) : %.o : %.s + @echo + $(AS) -c $(ASFLAGS) -I . $(INCDIR) $< -o $@ + +%elf: $(OBJS) + @echo + $(CC) $(ASMOBJS) $(AOBJS) $(TOBJS) $(LDFLAGS) $(LIBS) -o $@ + +%hex: %elf + $(HEX) $< $@ + +%bin: %elf + $(BIN) $< $@ + +%dmp: %elf + $(OD) $(ODFLAGS) $< > $@ + +clean: + -rm -f $(OBJS) + -rm -f $(PROJECT).elf + -rm -f $(PROJECT).dmp + -rm -f $(PROJECT).map + -rm -f $(PROJECT).hex + -rm -f $(PROJECT).bin + -rm -f $(ASRC:.c=.c.bak) + -rm -f $(ASRC:.c=.lst) + -rm -f $(TSRC:.c=.c.bak) + -rm -f $(TSRC:.c=.lst) + -rm -f $(ASMSRC:.s=.s.bak) + -rm -f $(ASMSRC:.s=.lst) + -rm -fR .dep + +# +# Include the dependency files, should be the last of the makefile +# +-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) + +# *** EOF *** diff --git a/demos/ARM7-AT91SAM7X-GCC/at91lib/AT91SAM7X256.h b/demos/ARM7-AT91SAM7X-GCC/at91lib/AT91SAM7X256.h new file mode 100644 index 000000000..20b0e747d --- /dev/null +++ b/demos/ARM7-AT91SAM7X-GCC/at91lib/AT91SAM7X256.h @@ -0,0 +1,2918 @@ +// ---------------------------------------------------------------------------- +// ATMEL Microcontroller Software Support - ROUSSET - +// ---------------------------------------------------------------------------- +// Copyright (c) 2006, Atmel Corporation +// +// All rights reserved. +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions are met: +// +// - Redistributions of source code must retain the above copyright notice, +// this list of conditions and the disclaimer below. +// +// - Redistributions in binary form must reproduce the above copyright notice, +// this list of conditions and the disclaimer below in the documentation and/or +// other materials provided with the distribution. +// +// Atmel's name may not be used to endorse or promote products derived from +// this software without specific prior written permission. +// +// DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR +// IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE +// DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, +// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, +// OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF +// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING +// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, +// EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// ---------------------------------------------------------------------------- +// File Name : AT91SAM7X256.h +// Object : AT91SAM7X256 definitions +// Generated : AT91 SW Application Group 06/19/2007 (15:41:06) +// +// CVS Reference : /AT91SAM7X256.pl/1.16/Wed Aug 30 14:16:22 2006// +// CVS Reference : /SYS_SAM7X.pl/1.3/Wed Feb 2 15:48:15 2005// +// CVS Reference : /MC_SAM7X.pl/1.2/Fri May 20 14:22:29 2005// +// CVS Reference : /PMC_SAM7X.pl/1.4/Tue Feb 8 14:00:19 2005// +// CVS Reference : /RSTC_SAM7X.pl/1.2/Wed Jul 13 15:25:17 2005// +// CVS Reference : /UDP_6ept.pl/1.1/Wed Aug 30 14:20:52 2006// +// CVS Reference : /PWM_SAM7X.pl/1.1/Tue May 10 12:38:54 2005// +// CVS Reference : /AIC_6075B.pl/1.3/Fri May 20 14:21:42 2005// +// CVS Reference : /PIO_6057A.pl/1.2/Thu Feb 3 10:29:42 2005// +// CVS Reference : /RTTC_6081A.pl/1.2/Thu Nov 4 13:57:22 2004// +// CVS Reference : /PITC_6079A.pl/1.2/Thu Nov 4 13:56:22 2004// +// CVS Reference : /WDTC_6080A.pl/1.3/Thu Nov 4 13:58:52 2004// +// CVS Reference : /VREG_6085B.pl/1.1/Tue Feb 1 16:40:38 2005// +// CVS Reference : /PDC_6074C.pl/1.2/Thu Feb 3 09:02:11 2005// +// CVS Reference : /DBGU_6059D.pl/1.1/Mon Jan 31 13:54:41 2005// +// CVS Reference : /SPI_6088D.pl/1.3/Fri May 20 14:23:02 2005// +// CVS Reference : /US_6089C.pl/1.1/Mon Jan 31 13:56:02 2005// +// CVS Reference : /SSC_6078B.pl/1.1/Wed Jul 13 15:25:46 2005// +// CVS Reference : /TWI_6061A.pl/1.2/Wed Oct 25 15:03:34 2006// +// CVS Reference : /TC_6082A.pl/1.7/Wed Mar 9 16:31:51 2005// +// CVS Reference : /CAN_6019B.pl/1.1/Mon Jan 31 13:54:30 2005// +// CVS Reference : /EMACB_6119A.pl/1.6/Wed Jul 13 15:25:00 2005// +// CVS Reference : /ADC_6051C.pl/1.1/Mon Jan 31 13:12:40 2005// +// ---------------------------------------------------------------------------- + +#ifndef AT91SAM7X256_H +#define AT91SAM7X256_H + +#ifndef __ASSEMBLY__ +typedef volatile unsigned int AT91_REG;// Hardware register definition +#define AT91_CAST(a) (a) +#else +#define AT91_CAST(a) +#endif + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR System Peripherals +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_SYS { + AT91_REG AIC_SMR[32]; // Source Mode Register + AT91_REG AIC_SVR[32]; // Source Vector Register + AT91_REG AIC_IVR; // IRQ Vector Register + AT91_REG AIC_FVR; // FIQ Vector Register + AT91_REG AIC_ISR; // Interrupt Status Register + AT91_REG AIC_IPR; // Interrupt Pending Register + AT91_REG AIC_IMR; // Interrupt Mask Register + AT91_REG AIC_CISR; // Core Interrupt Status Register + AT91_REG Reserved0[2]; // + AT91_REG AIC_IECR; // Interrupt Enable Command Register + AT91_REG AIC_IDCR; // Interrupt Disable Command Register + AT91_REG AIC_ICCR; // Interrupt Clear Command Register + AT91_REG AIC_ISCR; // Interrupt Set Command Register + AT91_REG AIC_EOICR; // End of Interrupt Command Register + AT91_REG AIC_SPU; // Spurious Vector Register + AT91_REG AIC_DCR; // Debug Control Register (Protect) + AT91_REG Reserved1[1]; // + AT91_REG AIC_FFER; // Fast Forcing Enable Register + AT91_REG AIC_FFDR; // Fast Forcing Disable Register + AT91_REG AIC_FFSR; // Fast Forcing Status Register + AT91_REG Reserved2[45]; // + AT91_REG DBGU_CR; // Control Register + AT91_REG DBGU_MR; // Mode Register + AT91_REG DBGU_IER; // Interrupt Enable Register + AT91_REG DBGU_IDR; // Interrupt Disable Register + AT91_REG DBGU_IMR; // Interrupt Mask Register + AT91_REG DBGU_CSR; // Channel Status Register + AT91_REG DBGU_RHR; // Receiver Holding Register + AT91_REG DBGU_THR; // Transmitter Holding Register + AT91_REG DBGU_BRGR; // Baud Rate Generator Register + AT91_REG Reserved3[7]; // + AT91_REG DBGU_CIDR; // Chip ID Register + AT91_REG DBGU_EXID; // Chip ID Extension Register + AT91_REG DBGU_FNTR; // Force NTRST Register + AT91_REG Reserved4[45]; // + AT91_REG DBGU_RPR; // Receive Pointer Register + AT91_REG DBGU_RCR; // Receive Counter Register + AT91_REG DBGU_TPR; // Transmit Pointer Register + AT91_REG DBGU_TCR; // Transmit Counter Register + AT91_REG DBGU_RNPR; // Receive Next Pointer Register + AT91_REG DBGU_RNCR; // Receive Next Counter Register + AT91_REG DBGU_TNPR; // Transmit Next Pointer Register + AT91_REG DBGU_TNCR; // Transmit Next Counter Register + AT91_REG DBGU_PTCR; // PDC Transfer Control Register + AT91_REG DBGU_PTSR; // PDC Transfer Status Register + AT91_REG Reserved5[54]; // + AT91_REG PIOA_PER; // PIO Enable Register + AT91_REG PIOA_PDR; // PIO Disable Register + AT91_REG PIOA_PSR; // PIO Status Register + AT91_REG Reserved6[1]; // + AT91_REG PIOA_OER; // Output Enable Register + AT91_REG PIOA_ODR; // Output Disable Registerr + AT91_REG PIOA_OSR; // Output Status Register + AT91_REG Reserved7[1]; // + AT91_REG PIOA_IFER; // Input Filter Enable Register + AT91_REG PIOA_IFDR; // Input Filter Disable Register + AT91_REG PIOA_IFSR; // Input Filter Status Register + AT91_REG Reserved8[1]; // + AT91_REG PIOA_SODR; // Set Output Data Register + AT91_REG PIOA_CODR; // Clear Output Data Register + AT91_REG PIOA_ODSR; // Output Data Status Register + AT91_REG PIOA_PDSR; // Pin Data Status Register + AT91_REG PIOA_IER; // Interrupt Enable Register + AT91_REG PIOA_IDR; // Interrupt Disable Register + AT91_REG PIOA_IMR; // Interrupt Mask Register + AT91_REG PIOA_ISR; // Interrupt Status Register + AT91_REG PIOA_MDER; // Multi-driver Enable Register + AT91_REG PIOA_MDDR; // Multi-driver Disable Register + AT91_REG PIOA_MDSR; // Multi-driver Status Register + AT91_REG Reserved9[1]; // + AT91_REG PIOA_PPUDR; // Pull-up Disable Register + AT91_REG PIOA_PPUER; // Pull-up Enable Register + AT91_REG PIOA_PPUSR; // Pull-up Status Register + AT91_REG Reserved10[1]; // + AT91_REG PIOA_ASR; // Select A Register + AT91_REG PIOA_BSR; // Select B Register + AT91_REG PIOA_ABSR; // AB Select Status Register + AT91_REG Reserved11[9]; // + AT91_REG PIOA_OWER; // Output Write Enable Register + AT91_REG PIOA_OWDR; // Output Write Disable Register + AT91_REG PIOA_OWSR; // Output Write Status Register + AT91_REG Reserved12[85]; // + AT91_REG PIOB_PER; // PIO Enable Register + AT91_REG PIOB_PDR; // PIO Disable Register + AT91_REG PIOB_PSR; // PIO Status Register + AT91_REG Reserved13[1]; // + AT91_REG PIOB_OER; // Output Enable Register + AT91_REG PIOB_ODR; // Output Disable Registerr + AT91_REG PIOB_OSR; // Output Status Register + AT91_REG Reserved14[1]; // + AT91_REG PIOB_IFER; // Input Filter Enable Register + AT91_REG PIOB_IFDR; // Input Filter Disable Register + AT91_REG PIOB_IFSR; // Input Filter Status Register + AT91_REG Reserved15[1]; // + AT91_REG PIOB_SODR; // Set Output Data Register + AT91_REG PIOB_CODR; // Clear Output Data Register + AT91_REG PIOB_ODSR; // Output Data Status Register + AT91_REG PIOB_PDSR; // Pin Data Status Register + AT91_REG PIOB_IER; // Interrupt Enable Register + AT91_REG PIOB_IDR; // Interrupt Disable Register + AT91_REG PIOB_IMR; // Interrupt Mask Register + AT91_REG PIOB_ISR; // Interrupt Status Register + AT91_REG PIOB_MDER; // Multi-driver Enable Register + AT91_REG PIOB_MDDR; // Multi-driver Disable Register + AT91_REG PIOB_MDSR; // Multi-driver Status Register + AT91_REG Reserved16[1]; // + AT91_REG PIOB_PPUDR; // Pull-up Disable Register + AT91_REG PIOB_PPUER; // Pull-up Enable Register + AT91_REG PIOB_PPUSR; // Pull-up Status Register + AT91_REG Reserved17[1]; // + AT91_REG PIOB_ASR; // Select A Register + AT91_REG PIOB_BSR; // Select B Register + AT91_REG PIOB_ABSR; // AB Select Status Register + AT91_REG Reserved18[9]; // + AT91_REG PIOB_OWER; // Output Write Enable Register + AT91_REG PIOB_OWDR; // Output Write Disable Register + AT91_REG PIOB_OWSR; // Output Write Status Register + AT91_REG Reserved19[341]; // + AT91_REG PMC_SCER; // System Clock Enable Register + AT91_REG PMC_SCDR; // System Clock Disable Register + AT91_REG PMC_SCSR; // System Clock Status Register + AT91_REG Reserved20[1]; // + AT91_REG PMC_PCER; // Peripheral Clock Enable Register + AT91_REG PMC_PCDR; // Peripheral Clock Disable Register + AT91_REG PMC_PCSR; // Peripheral Clock Status Register + AT91_REG Reserved21[1]; // + AT91_REG PMC_MOR; // Main Oscillator Register + AT91_REG PMC_MCFR; // Main Clock Frequency Register + AT91_REG Reserved22[1]; // + AT91_REG PMC_PLLR; // PLL Register + AT91_REG PMC_MCKR; // Master Clock Register + AT91_REG Reserved23[3]; // + AT91_REG PMC_PCKR[4]; // Programmable Clock Register + AT91_REG Reserved24[4]; // + AT91_REG PMC_IER; // Interrupt Enable Register + AT91_REG PMC_IDR; // Interrupt Disable Register + AT91_REG PMC_SR; // Status Register + AT91_REG PMC_IMR; // Interrupt Mask Register + AT91_REG Reserved25[36]; // + AT91_REG RSTC_RCR; // Reset Control Register + AT91_REG RSTC_RSR; // Reset Status Register + AT91_REG RSTC_RMR; // Reset Mode Register + AT91_REG Reserved26[5]; // + AT91_REG RTTC_RTMR; // Real-time Mode Register + AT91_REG RTTC_RTAR; // Real-time Alarm Register + AT91_REG RTTC_RTVR; // Real-time Value Register + AT91_REG RTTC_RTSR; // Real-time Status Register + AT91_REG PITC_PIMR; // Period Interval Mode Register + AT91_REG PITC_PISR; // Period Interval Status Register + AT91_REG PITC_PIVR; // Period Interval Value Register + AT91_REG PITC_PIIR; // Period Interval Image Register + AT91_REG WDTC_WDCR; // Watchdog Control Register + AT91_REG WDTC_WDMR; // Watchdog Mode Register + AT91_REG WDTC_WDSR; // Watchdog Status Register + AT91_REG Reserved27[5]; // + AT91_REG VREG_MR; // Voltage Regulator Mode Register +} AT91S_SYS, *AT91PS_SYS; +#else + +#endif + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Advanced Interrupt Controller +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_AIC { + AT91_REG AIC_SMR[32]; // Source Mode Register + AT91_REG AIC_SVR[32]; // Source Vector Register + AT91_REG AIC_IVR; // IRQ Vector Register + AT91_REG AIC_FVR; // FIQ Vector Register + AT91_REG AIC_ISR; // Interrupt Status Register + AT91_REG AIC_IPR; // Interrupt Pending Register + AT91_REG AIC_IMR; // Interrupt Mask Register + AT91_REG AIC_CISR; // Core Interrupt Status Register + AT91_REG Reserved0[2]; // + AT91_REG AIC_IECR; // Interrupt Enable Command Register + AT91_REG AIC_IDCR; // Interrupt Disable Command Register + AT91_REG AIC_ICCR; // Interrupt Clear Command Register + AT91_REG AIC_ISCR; // Interrupt Set Command Register + AT91_REG AIC_EOICR; // End of Interrupt Command Register + AT91_REG AIC_SPU; // Spurious Vector Register + AT91_REG AIC_DCR; // Debug Control Register (Protect) + AT91_REG Reserved1[1]; // + AT91_REG AIC_FFER; // Fast Forcing Enable Register + AT91_REG AIC_FFDR; // Fast Forcing Disable Register + AT91_REG AIC_FFSR; // Fast Forcing Status Register +} AT91S_AIC, *AT91PS_AIC; +#else +#define AIC_SMR (AT91_CAST(AT91_REG *) 0x00000000) // (AIC_SMR) Source Mode Register +#define AIC_SVR (AT91_CAST(AT91_REG *) 0x00000080) // (AIC_SVR) Source Vector Register +#define AIC_IVR (AT91_CAST(AT91_REG *) 0x00000100) // (AIC_IVR) IRQ Vector Register +#define AIC_FVR (AT91_CAST(AT91_REG *) 0x00000104) // (AIC_FVR) FIQ Vector Register +#define AIC_ISR (AT91_CAST(AT91_REG *) 0x00000108) // (AIC_ISR) Interrupt Status Register +#define AIC_IPR (AT91_CAST(AT91_REG *) 0x0000010C) // (AIC_IPR) Interrupt Pending Register +#define AIC_IMR (AT91_CAST(AT91_REG *) 0x00000110) // (AIC_IMR) Interrupt Mask Register +#define AIC_CISR (AT91_CAST(AT91_REG *) 0x00000114) // (AIC_CISR) Core Interrupt Status Register +#define AIC_IECR (AT91_CAST(AT91_REG *) 0x00000120) // (AIC_IECR) Interrupt Enable Command Register +#define AIC_IDCR (AT91_CAST(AT91_REG *) 0x00000124) // (AIC_IDCR) Interrupt Disable Command Register +#define AIC_ICCR (AT91_CAST(AT91_REG *) 0x00000128) // (AIC_ICCR) Interrupt Clear Command Register +#define AIC_ISCR (AT91_CAST(AT91_REG *) 0x0000012C) // (AIC_ISCR) Interrupt Set Command Register +#define AIC_EOICR (AT91_CAST(AT91_REG *) 0x00000130) // (AIC_EOICR) End of Interrupt Command Register +#define AIC_SPU (AT91_CAST(AT91_REG *) 0x00000134) // (AIC_SPU) Spurious Vector Register +#define AIC_DCR (AT91_CAST(AT91_REG *) 0x00000138) // (AIC_DCR) Debug Control Register (Protect) +#define AIC_FFER (AT91_CAST(AT91_REG *) 0x00000140) // (AIC_FFER) Fast Forcing Enable Register +#define AIC_FFDR (AT91_CAST(AT91_REG *) 0x00000144) // (AIC_FFDR) Fast Forcing Disable Register +#define AIC_FFSR (AT91_CAST(AT91_REG *) 0x00000148) // (AIC_FFSR) Fast Forcing Status Register + +#endif +// -------- AIC_SMR : (AIC Offset: 0x0) Control Register -------- +#define AT91C_AIC_PRIOR (0x7 << 0) // (AIC) Priority Level +#define AT91C_AIC_PRIOR_LOWEST (0x0) // (AIC) Lowest priority level +#define AT91C_AIC_PRIOR_HIGHEST (0x7) // (AIC) Highest priority level +#define AT91C_AIC_SRCTYPE (0x3 << 5) // (AIC) Interrupt Source Type +#define AT91C_AIC_SRCTYPE_INT_HIGH_LEVEL (0x0 << 5) // (AIC) Internal Sources Code Label High-level Sensitive +#define AT91C_AIC_SRCTYPE_EXT_LOW_LEVEL (0x0 << 5) // (AIC) External Sources Code Label Low-level Sensitive +#define AT91C_AIC_SRCTYPE_INT_POSITIVE_EDGE (0x1 << 5) // (AIC) Internal Sources Code Label Positive Edge triggered +#define AT91C_AIC_SRCTYPE_EXT_NEGATIVE_EDGE (0x1 << 5) // (AIC) External Sources Code Label Negative Edge triggered +#define AT91C_AIC_SRCTYPE_HIGH_LEVEL (0x2 << 5) // (AIC) Internal Or External Sources Code Label High-level Sensitive +#define AT91C_AIC_SRCTYPE_POSITIVE_EDGE (0x3 << 5) // (AIC) Internal Or External Sources Code Label Positive Edge triggered +// -------- AIC_CISR : (AIC Offset: 0x114) AIC Core Interrupt Status Register -------- +#define AT91C_AIC_NFIQ (0x1 << 0) // (AIC) NFIQ Status +#define AT91C_AIC_NIRQ (0x1 << 1) // (AIC) NIRQ Status +// -------- AIC_DCR : (AIC Offset: 0x138) AIC Debug Control Register (Protect) -------- +#define AT91C_AIC_DCR_PROT (0x1 << 0) // (AIC) Protection Mode +#define AT91C_AIC_DCR_GMSK (0x1 << 1) // (AIC) General Mask + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Peripheral DMA Controller +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_PDC { + AT91_REG PDC_RPR; // Receive Pointer Register + AT91_REG PDC_RCR; // Receive Counter Register + AT91_REG PDC_TPR; // Transmit Pointer Register + AT91_REG PDC_TCR; // Transmit Counter Register + AT91_REG PDC_RNPR; // Receive Next Pointer Register + AT91_REG PDC_RNCR; // Receive Next Counter Register + AT91_REG PDC_TNPR; // Transmit Next Pointer Register + AT91_REG PDC_TNCR; // Transmit Next Counter Register + AT91_REG PDC_PTCR; // PDC Transfer Control Register + AT91_REG PDC_PTSR; // PDC Transfer Status Register +} AT91S_PDC, *AT91PS_PDC; +#else +#define PDC_RPR (AT91_CAST(AT91_REG *) 0x00000000) // (PDC_RPR) Receive Pointer Register +#define PDC_RCR (AT91_CAST(AT91_REG *) 0x00000004) // (PDC_RCR) Receive Counter Register +#define PDC_TPR (AT91_CAST(AT91_REG *) 0x00000008) // (PDC_TPR) Transmit Pointer Register +#define PDC_TCR (AT91_CAST(AT91_REG *) 0x0000000C) // (PDC_TCR) Transmit Counter Register +#define PDC_RNPR (AT91_CAST(AT91_REG *) 0x00000010) // (PDC_RNPR) Receive Next Pointer Register +#define PDC_RNCR (AT91_CAST(AT91_REG *) 0x00000014) // (PDC_RNCR) Receive Next Counter Register +#define PDC_TNPR (AT91_CAST(AT91_REG *) 0x00000018) // (PDC_TNPR) Transmit Next Pointer Register +#define PDC_TNCR (AT91_CAST(AT91_REG *) 0x0000001C) // (PDC_TNCR) Transmit Next Counter Register +#define PDC_PTCR (AT91_CAST(AT91_REG *) 0x00000020) // (PDC_PTCR) PDC Transfer Control Register +#define PDC_PTSR (AT91_CAST(AT91_REG *) 0x00000024) // (PDC_PTSR) PDC Transfer Status Register + +#endif +// -------- PDC_PTCR : (PDC Offset: 0x20) PDC Transfer Control Register -------- +#define AT91C_PDC_RXTEN (0x1 << 0) // (PDC) Receiver Transfer Enable +#define AT91C_PDC_RXTDIS (0x1 << 1) // (PDC) Receiver Transfer Disable +#define AT91C_PDC_TXTEN (0x1 << 8) // (PDC) Transmitter Transfer Enable +#define AT91C_PDC_TXTDIS (0x1 << 9) // (PDC) Transmitter Transfer Disable +// -------- PDC_PTSR : (PDC Offset: 0x24) PDC Transfer Status Register -------- + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Debug Unit +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_DBGU { + AT91_REG DBGU_CR; // Control Register + AT91_REG DBGU_MR; // Mode Register + AT91_REG DBGU_IER; // Interrupt Enable Register + AT91_REG DBGU_IDR; // Interrupt Disable Register + AT91_REG DBGU_IMR; // Interrupt Mask Register + AT91_REG DBGU_CSR; // Channel Status Register + AT91_REG DBGU_RHR; // Receiver Holding Register + AT91_REG DBGU_THR; // Transmitter Holding Register + AT91_REG DBGU_BRGR; // Baud Rate Generator Register + AT91_REG Reserved0[7]; // + AT91_REG DBGU_CIDR; // Chip ID Register + AT91_REG DBGU_EXID; // Chip ID Extension Register + AT91_REG DBGU_FNTR; // Force NTRST Register + AT91_REG Reserved1[45]; // + AT91_REG DBGU_RPR; // Receive Pointer Register + AT91_REG DBGU_RCR; // Receive Counter Register + AT91_REG DBGU_TPR; // Transmit Pointer Register + AT91_REG DBGU_TCR; // Transmit Counter Register + AT91_REG DBGU_RNPR; // Receive Next Pointer Register + AT91_REG DBGU_RNCR; // Receive Next Counter Register + AT91_REG DBGU_TNPR; // Transmit Next Pointer Register + AT91_REG DBGU_TNCR; // Transmit Next Counter Register + AT91_REG DBGU_PTCR; // PDC Transfer Control Register + AT91_REG DBGU_PTSR; // PDC Transfer Status Register +} AT91S_DBGU, *AT91PS_DBGU; +#else +#define DBGU_CR (AT91_CAST(AT91_REG *) 0x00000000) // (DBGU_CR) Control Register +#define DBGU_MR (AT91_CAST(AT91_REG *) 0x00000004) // (DBGU_MR) Mode Register +#define DBGU_IER (AT91_CAST(AT91_REG *) 0x00000008) // (DBGU_IER) Interrupt Enable Register +#define DBGU_IDR (AT91_CAST(AT91_REG *) 0x0000000C) // (DBGU_IDR) Interrupt Disable Register +#define DBGU_IMR (AT91_CAST(AT91_REG *) 0x00000010) // (DBGU_IMR) Interrupt Mask Register +#define DBGU_CSR (AT91_CAST(AT91_REG *) 0x00000014) // (DBGU_CSR) Channel Status Register +#define DBGU_RHR (AT91_CAST(AT91_REG *) 0x00000018) // (DBGU_RHR) Receiver Holding Register +#define DBGU_THR (AT91_CAST(AT91_REG *) 0x0000001C) // (DBGU_THR) Transmitter Holding Register +#define DBGU_BRGR (AT91_CAST(AT91_REG *) 0x00000020) // (DBGU_BRGR) Baud Rate Generator Register +#define DBGU_CIDR (AT91_CAST(AT91_REG *) 0x00000040) // (DBGU_CIDR) Chip ID Register +#define DBGU_EXID (AT91_CAST(AT91_REG *) 0x00000044) // (DBGU_EXID) Chip ID Extension Register +#define DBGU_FNTR (AT91_CAST(AT91_REG *) 0x00000048) // (DBGU_FNTR) Force NTRST Register + +#endif +// -------- DBGU_CR : (DBGU Offset: 0x0) Debug Unit Control Register -------- +#define AT91C_US_RSTRX (0x1 << 2) // (DBGU) Reset Receiver +#define AT91C_US_RSTTX (0x1 << 3) // (DBGU) Reset Transmitter +#define AT91C_US_RXEN (0x1 << 4) // (DBGU) Receiver Enable +#define AT91C_US_RXDIS (0x1 << 5) // (DBGU) Receiver Disable +#define AT91C_US_TXEN (0x1 << 6) // (DBGU) Transmitter Enable +#define AT91C_US_TXDIS (0x1 << 7) // (DBGU) Transmitter Disable +#define AT91C_US_RSTSTA (0x1 << 8) // (DBGU) Reset Status Bits +// -------- DBGU_MR : (DBGU Offset: 0x4) Debug Unit Mode Register -------- +#define AT91C_US_PAR (0x7 << 9) // (DBGU) Parity type +#define AT91C_US_PAR_EVEN (0x0 << 9) // (DBGU) Even Parity +#define AT91C_US_PAR_ODD (0x1 << 9) // (DBGU) Odd Parity +#define AT91C_US_PAR_SPACE (0x2 << 9) // (DBGU) Parity forced to 0 (Space) +#define AT91C_US_PAR_MARK (0x3 << 9) // (DBGU) Parity forced to 1 (Mark) +#define AT91C_US_PAR_NONE (0x4 << 9) // (DBGU) No Parity +#define AT91C_US_PAR_MULTI_DROP (0x6 << 9) // (DBGU) Multi-drop mode +#define AT91C_US_CHMODE (0x3 << 14) // (DBGU) Channel Mode +#define AT91C_US_CHMODE_NORMAL (0x0 << 14) // (DBGU) Normal Mode: The USART channel operates as an RX/TX USART. +#define AT91C_US_CHMODE_AUTO (0x1 << 14) // (DBGU) Automatic Echo: Receiver Data Input is connected to the TXD pin. +#define AT91C_US_CHMODE_LOCAL (0x2 << 14) // (DBGU) Local Loopback: Transmitter Output Signal is connected to Receiver Input Signal. +#define AT91C_US_CHMODE_REMOTE (0x3 << 14) // (DBGU) Remote Loopback: RXD pin is internally connected to TXD pin. +// -------- DBGU_IER : (DBGU Offset: 0x8) Debug Unit Interrupt Enable Register -------- +#define AT91C_US_RXRDY (0x1 << 0) // (DBGU) RXRDY Interrupt +#define AT91C_US_TXRDY (0x1 << 1) // (DBGU) TXRDY Interrupt +#define AT91C_US_ENDRX (0x1 << 3) // (DBGU) End of Receive Transfer Interrupt +#define AT91C_US_ENDTX (0x1 << 4) // (DBGU) End of Transmit Interrupt +#define AT91C_US_OVRE (0x1 << 5) // (DBGU) Overrun Interrupt +#define AT91C_US_FRAME (0x1 << 6) // (DBGU) Framing Error Interrupt +#define AT91C_US_PARE (0x1 << 7) // (DBGU) Parity Error Interrupt +#define AT91C_US_TXEMPTY (0x1 << 9) // (DBGU) TXEMPTY Interrupt +#define AT91C_US_TXBUFE (0x1 << 11) // (DBGU) TXBUFE Interrupt +#define AT91C_US_RXBUFF (0x1 << 12) // (DBGU) RXBUFF Interrupt +#define AT91C_US_COMM_TX (0x1 << 30) // (DBGU) COMM_TX Interrupt +#define AT91C_US_COMM_RX (0x1 << 31) // (DBGU) COMM_RX Interrupt +// -------- DBGU_IDR : (DBGU Offset: 0xc) Debug Unit Interrupt Disable Register -------- +// -------- DBGU_IMR : (DBGU Offset: 0x10) Debug Unit Interrupt Mask Register -------- +// -------- DBGU_CSR : (DBGU Offset: 0x14) Debug Unit Channel Status Register -------- +// -------- DBGU_FNTR : (DBGU Offset: 0x48) Debug Unit FORCE_NTRST Register -------- +#define AT91C_US_FORCE_NTRST (0x1 << 0) // (DBGU) Force NTRST in JTAG + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Parallel Input Output Controler +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_PIO { + AT91_REG PIO_PER; // PIO Enable Register + AT91_REG PIO_PDR; // PIO Disable Register + AT91_REG PIO_PSR; // PIO Status Register + AT91_REG Reserved0[1]; // + AT91_REG PIO_OER; // Output Enable Register + AT91_REG PIO_ODR; // Output Disable Registerr + AT91_REG PIO_OSR; // Output Status Register + AT91_REG Reserved1[1]; // + AT91_REG PIO_IFER; // Input Filter Enable Register + AT91_REG PIO_IFDR; // Input Filter Disable Register + AT91_REG PIO_IFSR; // Input Filter Status Register + AT91_REG Reserved2[1]; // + AT91_REG PIO_SODR; // Set Output Data Register + AT91_REG PIO_CODR; // Clear Output Data Register + AT91_REG PIO_ODSR; // Output Data Status Register + AT91_REG PIO_PDSR; // Pin Data Status Register + AT91_REG PIO_IER; // Interrupt Enable Register + AT91_REG PIO_IDR; // Interrupt Disable Register + AT91_REG PIO_IMR; // Interrupt Mask Register + AT91_REG PIO_ISR; // Interrupt Status Register + AT91_REG PIO_MDER; // Multi-driver Enable Register + AT91_REG PIO_MDDR; // Multi-driver Disable Register + AT91_REG PIO_MDSR; // Multi-driver Status Register + AT91_REG Reserved3[1]; // + AT91_REG PIO_PPUDR; // Pull-up Disable Register + AT91_REG PIO_PPUER; // Pull-up Enable Register + AT91_REG PIO_PPUSR; // Pull-up Status Register + AT91_REG Reserved4[1]; // + AT91_REG PIO_ASR; // Select A Register + AT91_REG PIO_BSR; // Select B Register + AT91_REG PIO_ABSR; // AB Select Status Register + AT91_REG Reserved5[9]; // + AT91_REG PIO_OWER; // Output Write Enable Register + AT91_REG PIO_OWDR; // Output Write Disable Register + AT91_REG PIO_OWSR; // Output Write Status Register +} AT91S_PIO, *AT91PS_PIO; +#else +#define PIO_PER (AT91_CAST(AT91_REG *) 0x00000000) // (PIO_PER) PIO Enable Register +#define PIO_PDR (AT91_CAST(AT91_REG *) 0x00000004) // (PIO_PDR) PIO Disable Register +#define PIO_PSR (AT91_CAST(AT91_REG *) 0x00000008) // (PIO_PSR) PIO Status Register +#define PIO_OER (AT91_CAST(AT91_REG *) 0x00000010) // (PIO_OER) Output Enable Register +#define PIO_ODR (AT91_CAST(AT91_REG *) 0x00000014) // (PIO_ODR) Output Disable Registerr +#define PIO_OSR (AT91_CAST(AT91_REG *) 0x00000018) // (PIO_OSR) Output Status Register +#define PIO_IFER (AT91_CAST(AT91_REG *) 0x00000020) // (PIO_IFER) Input Filter Enable Register +#define PIO_IFDR (AT91_CAST(AT91_REG *) 0x00000024) // (PIO_IFDR) Input Filter Disable Register +#define PIO_IFSR (AT91_CAST(AT91_REG *) 0x00000028) // (PIO_IFSR) Input Filter Status Register +#define PIO_SODR (AT91_CAST(AT91_REG *) 0x00000030) // (PIO_SODR) Set Output Data Register +#define PIO_CODR (AT91_CAST(AT91_REG *) 0x00000034) // (PIO_CODR) Clear Output Data Register +#define PIO_ODSR (AT91_CAST(AT91_REG *) 0x00000038) // (PIO_ODSR) Output Data Status Register +#define PIO_PDSR (AT91_CAST(AT91_REG *) 0x0000003C) // (PIO_PDSR) Pin Data Status Register +#define PIO_IER (AT91_CAST(AT91_REG *) 0x00000040) // (PIO_IER) Interrupt Enable Register +#define PIO_IDR (AT91_CAST(AT91_REG *) 0x00000044) // (PIO_IDR) Interrupt Disable Register +#define PIO_IMR (AT91_CAST(AT91_REG *) 0x00000048) // (PIO_IMR) Interrupt Mask Register +#define PIO_ISR (AT91_CAST(AT91_REG *) 0x0000004C) // (PIO_ISR) Interrupt Status Register +#define PIO_MDER (AT91_CAST(AT91_REG *) 0x00000050) // (PIO_MDER) Multi-driver Enable Register +#define PIO_MDDR (AT91_CAST(AT91_REG *) 0x00000054) // (PIO_MDDR) Multi-driver Disable Register +#define PIO_MDSR (AT91_CAST(AT91_REG *) 0x00000058) // (PIO_MDSR) Multi-driver Status Register +#define PIO_PPUDR (AT91_CAST(AT91_REG *) 0x00000060) // (PIO_PPUDR) Pull-up Disable Register +#define PIO_PPUER (AT91_CAST(AT91_REG *) 0x00000064) // (PIO_PPUER) Pull-up Enable Register +#define PIO_PPUSR (AT91_CAST(AT91_REG *) 0x00000068) // (PIO_PPUSR) Pull-up Status Register +#define PIO_ASR (AT91_CAST(AT91_REG *) 0x00000070) // (PIO_ASR) Select A Register +#define PIO_BSR (AT91_CAST(AT91_REG *) 0x00000074) // (PIO_BSR) Select B Register +#define PIO_ABSR (AT91_CAST(AT91_REG *) 0x00000078) // (PIO_ABSR) AB Select Status Register +#define PIO_OWER (AT91_CAST(AT91_REG *) 0x000000A0) // (PIO_OWER) Output Write Enable Register +#define PIO_OWDR (AT91_CAST(AT91_REG *) 0x000000A4) // (PIO_OWDR) Output Write Disable Register +#define PIO_OWSR (AT91_CAST(AT91_REG *) 0x000000A8) // (PIO_OWSR) Output Write Status Register + +#endif + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Clock Generator Controler +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_CKGR { + AT91_REG CKGR_MOR; // Main Oscillator Register + AT91_REG CKGR_MCFR; // Main Clock Frequency Register + AT91_REG Reserved0[1]; // + AT91_REG CKGR_PLLR; // PLL Register +} AT91S_CKGR, *AT91PS_CKGR; +#else +#define CKGR_MOR (AT91_CAST(AT91_REG *) 0x00000000) // (CKGR_MOR) Main Oscillator Register +#define CKGR_MCFR (AT91_CAST(AT91_REG *) 0x00000004) // (CKGR_MCFR) Main Clock Frequency Register +#define CKGR_PLLR (AT91_CAST(AT91_REG *) 0x0000000C) // (CKGR_PLLR) PLL Register + +#endif +// -------- CKGR_MOR : (CKGR Offset: 0x0) Main Oscillator Register -------- +#define AT91C_CKGR_MOSCEN (0x1 << 0) // (CKGR) Main Oscillator Enable +#define AT91C_CKGR_OSCBYPASS (0x1 << 1) // (CKGR) Main Oscillator Bypass +#define AT91C_CKGR_OSCOUNT (0xFF << 8) // (CKGR) Main Oscillator Start-up Time +// -------- CKGR_MCFR : (CKGR Offset: 0x4) Main Clock Frequency Register -------- +#define AT91C_CKGR_MAINF (0xFFFF << 0) // (CKGR) Main Clock Frequency +#define AT91C_CKGR_MAINRDY (0x1 << 16) // (CKGR) Main Clock Ready +// -------- CKGR_PLLR : (CKGR Offset: 0xc) PLL B Register -------- +#define AT91C_CKGR_DIV (0xFF << 0) // (CKGR) Divider Selected +#define AT91C_CKGR_DIV_0 (0x0) // (CKGR) Divider output is 0 +#define AT91C_CKGR_DIV_BYPASS (0x1) // (CKGR) Divider is bypassed +#define AT91C_CKGR_PLLCOUNT (0x3F << 8) // (CKGR) PLL Counter +#define AT91C_CKGR_OUT (0x3 << 14) // (CKGR) PLL Output Frequency Range +#define AT91C_CKGR_OUT_0 (0x0 << 14) // (CKGR) Please refer to the PLL datasheet +#define AT91C_CKGR_OUT_1 (0x1 << 14) // (CKGR) Please refer to the PLL datasheet +#define AT91C_CKGR_OUT_2 (0x2 << 14) // (CKGR) Please refer to the PLL datasheet +#define AT91C_CKGR_OUT_3 (0x3 << 14) // (CKGR) Please refer to the PLL datasheet +#define AT91C_CKGR_MUL (0x7FF << 16) // (CKGR) PLL Multiplier +#define AT91C_CKGR_USBDIV (0x3 << 28) // (CKGR) Divider for USB Clocks +#define AT91C_CKGR_USBDIV_0 (0x0 << 28) // (CKGR) Divider output is PLL clock output +#define AT91C_CKGR_USBDIV_1 (0x1 << 28) // (CKGR) Divider output is PLL clock output divided by 2 +#define AT91C_CKGR_USBDIV_2 (0x2 << 28) // (CKGR) Divider output is PLL clock output divided by 4 + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Power Management Controler +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_PMC { + AT91_REG PMC_SCER; // System Clock Enable Register + AT91_REG PMC_SCDR; // System Clock Disable Register + AT91_REG PMC_SCSR; // System Clock Status Register + AT91_REG Reserved0[1]; // + AT91_REG PMC_PCER; // Peripheral Clock Enable Register + AT91_REG PMC_PCDR; // Peripheral Clock Disable Register + AT91_REG PMC_PCSR; // Peripheral Clock Status Register + AT91_REG Reserved1[1]; // + AT91_REG PMC_MOR; // Main Oscillator Register + AT91_REG PMC_MCFR; // Main Clock Frequency Register + AT91_REG Reserved2[1]; // + AT91_REG PMC_PLLR; // PLL Register + AT91_REG PMC_MCKR; // Master Clock Register + AT91_REG Reserved3[3]; // + AT91_REG PMC_PCKR[4]; // Programmable Clock Register + AT91_REG Reserved4[4]; // + AT91_REG PMC_IER; // Interrupt Enable Register + AT91_REG PMC_IDR; // Interrupt Disable Register + AT91_REG PMC_SR; // Status Register + AT91_REG PMC_IMR; // Interrupt Mask Register +} AT91S_PMC, *AT91PS_PMC; +#else +#define PMC_SCER (AT91_CAST(AT91_REG *) 0x00000000) // (PMC_SCER) System Clock Enable Register +#define PMC_SCDR (AT91_CAST(AT91_REG *) 0x00000004) // (PMC_SCDR) System Clock Disable Register +#define PMC_SCSR (AT91_CAST(AT91_REG *) 0x00000008) // (PMC_SCSR) System Clock Status Register +#define PMC_PCER (AT91_CAST(AT91_REG *) 0x00000010) // (PMC_PCER) Peripheral Clock Enable Register +#define PMC_PCDR (AT91_CAST(AT91_REG *) 0x00000014) // (PMC_PCDR) Peripheral Clock Disable Register +#define PMC_PCSR (AT91_CAST(AT91_REG *) 0x00000018) // (PMC_PCSR) Peripheral Clock Status Register +#define PMC_MCKR (AT91_CAST(AT91_REG *) 0x00000030) // (PMC_MCKR) Master Clock Register +#define PMC_PCKR (AT91_CAST(AT91_REG *) 0x00000040) // (PMC_PCKR) Programmable Clock Register +#define PMC_IER (AT91_CAST(AT91_REG *) 0x00000060) // (PMC_IER) Interrupt Enable Register +#define PMC_IDR (AT91_CAST(AT91_REG *) 0x00000064) // (PMC_IDR) Interrupt Disable Register +#define PMC_SR (AT91_CAST(AT91_REG *) 0x00000068) // (PMC_SR) Status Register +#define PMC_IMR (AT91_CAST(AT91_REG *) 0x0000006C) // (PMC_IMR) Interrupt Mask Register + +#endif +// -------- PMC_SCER : (PMC Offset: 0x0) System Clock Enable Register -------- +#define AT91C_PMC_PCK (0x1 << 0) // (PMC) Processor Clock +#define AT91C_PMC_UDP (0x1 << 7) // (PMC) USB Device Port Clock +#define AT91C_PMC_PCK0 (0x1 << 8) // (PMC) Programmable Clock Output +#define AT91C_PMC_PCK1 (0x1 << 9) // (PMC) Programmable Clock Output +#define AT91C_PMC_PCK2 (0x1 << 10) // (PMC) Programmable Clock Output +#define AT91C_PMC_PCK3 (0x1 << 11) // (PMC) Programmable Clock Output +// -------- PMC_SCDR : (PMC Offset: 0x4) System Clock Disable Register -------- +// -------- PMC_SCSR : (PMC Offset: 0x8) System Clock Status Register -------- +// -------- CKGR_MOR : (PMC Offset: 0x20) Main Oscillator Register -------- +// -------- CKGR_MCFR : (PMC Offset: 0x24) Main Clock Frequency Register -------- +// -------- CKGR_PLLR : (PMC Offset: 0x2c) PLL B Register -------- +// -------- PMC_MCKR : (PMC Offset: 0x30) Master Clock Register -------- +#define AT91C_PMC_CSS (0x3 << 0) // (PMC) Programmable Clock Selection +#define AT91C_PMC_CSS_SLOW_CLK (0x0) // (PMC) Slow Clock is selected +#define AT91C_PMC_CSS_MAIN_CLK (0x1) // (PMC) Main Clock is selected +#define AT91C_PMC_CSS_PLL_CLK (0x3) // (PMC) Clock from PLL is selected +#define AT91C_PMC_PRES (0x7 << 2) // (PMC) Programmable Clock Prescaler +#define AT91C_PMC_PRES_CLK (0x0 << 2) // (PMC) Selected clock +#define AT91C_PMC_PRES_CLK_2 (0x1 << 2) // (PMC) Selected clock divided by 2 +#define AT91C_PMC_PRES_CLK_4 (0x2 << 2) // (PMC) Selected clock divided by 4 +#define AT91C_PMC_PRES_CLK_8 (0x3 << 2) // (PMC) Selected clock divided by 8 +#define AT91C_PMC_PRES_CLK_16 (0x4 << 2) // (PMC) Selected clock divided by 16 +#define AT91C_PMC_PRES_CLK_32 (0x5 << 2) // (PMC) Selected clock divided by 32 +#define AT91C_PMC_PRES_CLK_64 (0x6 << 2) // (PMC) Selected clock divided by 64 +// -------- PMC_PCKR : (PMC Offset: 0x40) Programmable Clock Register -------- +// -------- PMC_IER : (PMC Offset: 0x60) PMC Interrupt Enable Register -------- +#define AT91C_PMC_MOSCS (0x1 << 0) // (PMC) MOSC Status/Enable/Disable/Mask +#define AT91C_PMC_LOCK (0x1 << 2) // (PMC) PLL Status/Enable/Disable/Mask +#define AT91C_PMC_MCKRDY (0x1 << 3) // (PMC) MCK_RDY Status/Enable/Disable/Mask +#define AT91C_PMC_PCK0RDY (0x1 << 8) // (PMC) PCK0_RDY Status/Enable/Disable/Mask +#define AT91C_PMC_PCK1RDY (0x1 << 9) // (PMC) PCK1_RDY Status/Enable/Disable/Mask +#define AT91C_PMC_PCK2RDY (0x1 << 10) // (PMC) PCK2_RDY Status/Enable/Disable/Mask +#define AT91C_PMC_PCK3RDY (0x1 << 11) // (PMC) PCK3_RDY Status/Enable/Disable/Mask +// -------- PMC_IDR : (PMC Offset: 0x64) PMC Interrupt Disable Register -------- +// -------- PMC_SR : (PMC Offset: 0x68) PMC Status Register -------- +// -------- PMC_IMR : (PMC Offset: 0x6c) PMC Interrupt Mask Register -------- + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Reset Controller Interface +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_RSTC { + AT91_REG RSTC_RCR; // Reset Control Register + AT91_REG RSTC_RSR; // Reset Status Register + AT91_REG RSTC_RMR; // Reset Mode Register +} AT91S_RSTC, *AT91PS_RSTC; +#else +#define RSTC_RCR (AT91_CAST(AT91_REG *) 0x00000000) // (RSTC_RCR) Reset Control Register +#define RSTC_RSR (AT91_CAST(AT91_REG *) 0x00000004) // (RSTC_RSR) Reset Status Register +#define RSTC_RMR (AT91_CAST(AT91_REG *) 0x00000008) // (RSTC_RMR) Reset Mode Register + +#endif +// -------- RSTC_RCR : (RSTC Offset: 0x0) Reset Control Register -------- +#define AT91C_RSTC_PROCRST (0x1 << 0) // (RSTC) Processor Reset +#define AT91C_RSTC_PERRST (0x1 << 2) // (RSTC) Peripheral Reset +#define AT91C_RSTC_EXTRST (0x1 << 3) // (RSTC) External Reset +#define AT91C_RSTC_KEY (0xFF << 24) // (RSTC) Password +// -------- RSTC_RSR : (RSTC Offset: 0x4) Reset Status Register -------- +#define AT91C_RSTC_URSTS (0x1 << 0) // (RSTC) User Reset Status +#define AT91C_RSTC_BODSTS (0x1 << 1) // (RSTC) Brownout Detection Status +#define AT91C_RSTC_RSTTYP (0x7 << 8) // (RSTC) Reset Type +#define AT91C_RSTC_RSTTYP_POWERUP (0x0 << 8) // (RSTC) Power-up Reset. VDDCORE rising. +#define AT91C_RSTC_RSTTYP_WAKEUP (0x1 << 8) // (RSTC) WakeUp Reset. VDDCORE rising. +#define AT91C_RSTC_RSTTYP_WATCHDOG (0x2 << 8) // (RSTC) Watchdog Reset. Watchdog overflow occured. +#define AT91C_RSTC_RSTTYP_SOFTWARE (0x3 << 8) // (RSTC) Software Reset. Processor reset required by the software. +#define AT91C_RSTC_RSTTYP_USER (0x4 << 8) // (RSTC) User Reset. NRST pin detected low. +#define AT91C_RSTC_RSTTYP_BROWNOUT (0x5 << 8) // (RSTC) Brownout Reset occured. +#define AT91C_RSTC_NRSTL (0x1 << 16) // (RSTC) NRST pin level +#define AT91C_RSTC_SRCMP (0x1 << 17) // (RSTC) Software Reset Command in Progress. +// -------- RSTC_RMR : (RSTC Offset: 0x8) Reset Mode Register -------- +#define AT91C_RSTC_URSTEN (0x1 << 0) // (RSTC) User Reset Enable +#define AT91C_RSTC_URSTIEN (0x1 << 4) // (RSTC) User Reset Interrupt Enable +#define AT91C_RSTC_ERSTL (0xF << 8) // (RSTC) User Reset Length +#define AT91C_RSTC_BODIEN (0x1 << 16) // (RSTC) Brownout Detection Interrupt Enable + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Real Time Timer Controller Interface +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_RTTC { + AT91_REG RTTC_RTMR; // Real-time Mode Register + AT91_REG RTTC_RTAR; // Real-time Alarm Register + AT91_REG RTTC_RTVR; // Real-time Value Register + AT91_REG RTTC_RTSR; // Real-time Status Register +} AT91S_RTTC, *AT91PS_RTTC; +#else +#define RTTC_RTMR (AT91_CAST(AT91_REG *) 0x00000000) // (RTTC_RTMR) Real-time Mode Register +#define RTTC_RTAR (AT91_CAST(AT91_REG *) 0x00000004) // (RTTC_RTAR) Real-time Alarm Register +#define RTTC_RTVR (AT91_CAST(AT91_REG *) 0x00000008) // (RTTC_RTVR) Real-time Value Register +#define RTTC_RTSR (AT91_CAST(AT91_REG *) 0x0000000C) // (RTTC_RTSR) Real-time Status Register + +#endif +// -------- RTTC_RTMR : (RTTC Offset: 0x0) Real-time Mode Register -------- +#define AT91C_RTTC_RTPRES (0xFFFF << 0) // (RTTC) Real-time Timer Prescaler Value +#define AT91C_RTTC_ALMIEN (0x1 << 16) // (RTTC) Alarm Interrupt Enable +#define AT91C_RTTC_RTTINCIEN (0x1 << 17) // (RTTC) Real Time Timer Increment Interrupt Enable +#define AT91C_RTTC_RTTRST (0x1 << 18) // (RTTC) Real Time Timer Restart +// -------- RTTC_RTAR : (RTTC Offset: 0x4) Real-time Alarm Register -------- +#define AT91C_RTTC_ALMV (0x0 << 0) // (RTTC) Alarm Value +// -------- RTTC_RTVR : (RTTC Offset: 0x8) Current Real-time Value Register -------- +#define AT91C_RTTC_CRTV (0x0 << 0) // (RTTC) Current Real-time Value +// -------- RTTC_RTSR : (RTTC Offset: 0xc) Real-time Status Register -------- +#define AT91C_RTTC_ALMS (0x1 << 0) // (RTTC) Real-time Alarm Status +#define AT91C_RTTC_RTTINC (0x1 << 1) // (RTTC) Real-time Timer Increment + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Periodic Interval Timer Controller Interface +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_PITC { + AT91_REG PITC_PIMR; // Period Interval Mode Register + AT91_REG PITC_PISR; // Period Interval Status Register + AT91_REG PITC_PIVR; // Period Interval Value Register + AT91_REG PITC_PIIR; // Period Interval Image Register +} AT91S_PITC, *AT91PS_PITC; +#else +#define PITC_PIMR (AT91_CAST(AT91_REG *) 0x00000000) // (PITC_PIMR) Period Interval Mode Register +#define PITC_PISR (AT91_CAST(AT91_REG *) 0x00000004) // (PITC_PISR) Period Interval Status Register +#define PITC_PIVR (AT91_CAST(AT91_REG *) 0x00000008) // (PITC_PIVR) Period Interval Value Register +#define PITC_PIIR (AT91_CAST(AT91_REG *) 0x0000000C) // (PITC_PIIR) Period Interval Image Register + +#endif +// -------- PITC_PIMR : (PITC Offset: 0x0) Periodic Interval Mode Register -------- +#define AT91C_PITC_PIV (0xFFFFF << 0) // (PITC) Periodic Interval Value +#define AT91C_PITC_PITEN (0x1 << 24) // (PITC) Periodic Interval Timer Enabled +#define AT91C_PITC_PITIEN (0x1 << 25) // (PITC) Periodic Interval Timer Interrupt Enable +// -------- PITC_PISR : (PITC Offset: 0x4) Periodic Interval Status Register -------- +#define AT91C_PITC_PITS (0x1 << 0) // (PITC) Periodic Interval Timer Status +// -------- PITC_PIVR : (PITC Offset: 0x8) Periodic Interval Value Register -------- +#define AT91C_PITC_CPIV (0xFFFFF << 0) // (PITC) Current Periodic Interval Value +#define AT91C_PITC_PICNT (0xFFF << 20) // (PITC) Periodic Interval Counter +// -------- PITC_PIIR : (PITC Offset: 0xc) Periodic Interval Image Register -------- + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Watchdog Timer Controller Interface +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_WDTC { + AT91_REG WDTC_WDCR; // Watchdog Control Register + AT91_REG WDTC_WDMR; // Watchdog Mode Register + AT91_REG WDTC_WDSR; // Watchdog Status Register +} AT91S_WDTC, *AT91PS_WDTC; +#else +#define WDTC_WDCR (AT91_CAST(AT91_REG *) 0x00000000) // (WDTC_WDCR) Watchdog Control Register +#define WDTC_WDMR (AT91_CAST(AT91_REG *) 0x00000004) // (WDTC_WDMR) Watchdog Mode Register +#define WDTC_WDSR (AT91_CAST(AT91_REG *) 0x00000008) // (WDTC_WDSR) Watchdog Status Register + +#endif +// -------- WDTC_WDCR : (WDTC Offset: 0x0) Periodic Interval Image Register -------- +#define AT91C_WDTC_WDRSTT (0x1 << 0) // (WDTC) Watchdog Restart +#define AT91C_WDTC_KEY (0xFF << 24) // (WDTC) Watchdog KEY Password +// -------- WDTC_WDMR : (WDTC Offset: 0x4) Watchdog Mode Register -------- +#define AT91C_WDTC_WDV (0xFFF << 0) // (WDTC) Watchdog Timer Restart +#define AT91C_WDTC_WDFIEN (0x1 << 12) // (WDTC) Watchdog Fault Interrupt Enable +#define AT91C_WDTC_WDRSTEN (0x1 << 13) // (WDTC) Watchdog Reset Enable +#define AT91C_WDTC_WDRPROC (0x1 << 14) // (WDTC) Watchdog Timer Restart +#define AT91C_WDTC_WDDIS (0x1 << 15) // (WDTC) Watchdog Disable +#define AT91C_WDTC_WDD (0xFFF << 16) // (WDTC) Watchdog Delta Value +#define AT91C_WDTC_WDDBGHLT (0x1 << 28) // (WDTC) Watchdog Debug Halt +#define AT91C_WDTC_WDIDLEHLT (0x1 << 29) // (WDTC) Watchdog Idle Halt +// -------- WDTC_WDSR : (WDTC Offset: 0x8) Watchdog Status Register -------- +#define AT91C_WDTC_WDUNF (0x1 << 0) // (WDTC) Watchdog Underflow +#define AT91C_WDTC_WDERR (0x1 << 1) // (WDTC) Watchdog Error + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Voltage Regulator Mode Controller Interface +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_VREG { + AT91_REG VREG_MR; // Voltage Regulator Mode Register +} AT91S_VREG, *AT91PS_VREG; +#else +#define VREG_MR (AT91_CAST(AT91_REG *) 0x00000000) // (VREG_MR) Voltage Regulator Mode Register + +#endif +// -------- VREG_MR : (VREG Offset: 0x0) Voltage Regulator Mode Register -------- +#define AT91C_VREG_PSTDBY (0x1 << 0) // (VREG) Voltage Regulator Power Standby Mode + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Memory Controller Interface +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_MC { + AT91_REG MC_RCR; // MC Remap Control Register + AT91_REG MC_ASR; // MC Abort Status Register + AT91_REG MC_AASR; // MC Abort Address Status Register + AT91_REG Reserved0[21]; // + AT91_REG MC_FMR; // MC Flash Mode Register + AT91_REG MC_FCR; // MC Flash Command Register + AT91_REG MC_FSR; // MC Flash Status Register +} AT91S_MC, *AT91PS_MC; +#else +#define MC_RCR (AT91_CAST(AT91_REG *) 0x00000000) // (MC_RCR) MC Remap Control Register +#define MC_ASR (AT91_CAST(AT91_REG *) 0x00000004) // (MC_ASR) MC Abort Status Register +#define MC_AASR (AT91_CAST(AT91_REG *) 0x00000008) // (MC_AASR) MC Abort Address Status Register +#define MC_FMR (AT91_CAST(AT91_REG *) 0x00000060) // (MC_FMR) MC Flash Mode Register +#define MC_FCR (AT91_CAST(AT91_REG *) 0x00000064) // (MC_FCR) MC Flash Command Register +#define MC_FSR (AT91_CAST(AT91_REG *) 0x00000068) // (MC_FSR) MC Flash Status Register + +#endif +// -------- MC_RCR : (MC Offset: 0x0) MC Remap Control Register -------- +#define AT91C_MC_RCB (0x1 << 0) // (MC) Remap Command Bit +// -------- MC_ASR : (MC Offset: 0x4) MC Abort Status Register -------- +#define AT91C_MC_UNDADD (0x1 << 0) // (MC) Undefined Addess Abort Status +#define AT91C_MC_MISADD (0x1 << 1) // (MC) Misaligned Addess Abort Status +#define AT91C_MC_ABTSZ (0x3 << 8) // (MC) Abort Size Status +#define AT91C_MC_ABTSZ_BYTE (0x0 << 8) // (MC) Byte +#define AT91C_MC_ABTSZ_HWORD (0x1 << 8) // (MC) Half-word +#define AT91C_MC_ABTSZ_WORD (0x2 << 8) // (MC) Word +#define AT91C_MC_ABTTYP (0x3 << 10) // (MC) Abort Type Status +#define AT91C_MC_ABTTYP_DATAR (0x0 << 10) // (MC) Data Read +#define AT91C_MC_ABTTYP_DATAW (0x1 << 10) // (MC) Data Write +#define AT91C_MC_ABTTYP_FETCH (0x2 << 10) // (MC) Code Fetch +#define AT91C_MC_MST0 (0x1 << 16) // (MC) Master 0 Abort Source +#define AT91C_MC_MST1 (0x1 << 17) // (MC) Master 1 Abort Source +#define AT91C_MC_SVMST0 (0x1 << 24) // (MC) Saved Master 0 Abort Source +#define AT91C_MC_SVMST1 (0x1 << 25) // (MC) Saved Master 1 Abort Source +// -------- MC_FMR : (MC Offset: 0x60) MC Flash Mode Register -------- +#define AT91C_MC_FRDY (0x1 << 0) // (MC) Flash Ready +#define AT91C_MC_LOCKE (0x1 << 2) // (MC) Lock Error +#define AT91C_MC_PROGE (0x1 << 3) // (MC) Programming Error +#define AT91C_MC_NEBP (0x1 << 7) // (MC) No Erase Before Programming +#define AT91C_MC_FWS (0x3 << 8) // (MC) Flash Wait State +#define AT91C_MC_FWS_0FWS (0x0 << 8) // (MC) 1 cycle for Read, 2 for Write operations +#define AT91C_MC_FWS_1FWS (0x1 << 8) // (MC) 2 cycles for Read, 3 for Write operations +#define AT91C_MC_FWS_2FWS (0x2 << 8) // (MC) 3 cycles for Read, 4 for Write operations +#define AT91C_MC_FWS_3FWS (0x3 << 8) // (MC) 4 cycles for Read, 4 for Write operations +#define AT91C_MC_FMCN (0xFF << 16) // (MC) Flash Microsecond Cycle Number +// -------- MC_FCR : (MC Offset: 0x64) MC Flash Command Register -------- +#define AT91C_MC_FCMD (0xF << 0) // (MC) Flash Command +#define AT91C_MC_FCMD_START_PROG (0x1) // (MC) Starts the programming of th epage specified by PAGEN. +#define AT91C_MC_FCMD_LOCK (0x2) // (MC) Starts a lock sequence of the sector defined by the bits 4 to 7 of the field PAGEN. +#define AT91C_MC_FCMD_PROG_AND_LOCK (0x3) // (MC) The lock sequence automatically happens after the programming sequence is completed. +#define AT91C_MC_FCMD_UNLOCK (0x4) // (MC) Starts an unlock sequence of the sector defined by the bits 4 to 7 of the field PAGEN. +#define AT91C_MC_FCMD_ERASE_ALL (0x8) // (MC) Starts the erase of the entire flash.If at least a page is locked, the command is cancelled. +#define AT91C_MC_FCMD_SET_GP_NVM (0xB) // (MC) Set General Purpose NVM bits. +#define AT91C_MC_FCMD_CLR_GP_NVM (0xD) // (MC) Clear General Purpose NVM bits. +#define AT91C_MC_FCMD_SET_SECURITY (0xF) // (MC) Set Security Bit. +#define AT91C_MC_PAGEN (0x3FF << 8) // (MC) Page Number +#define AT91C_MC_KEY (0xFF << 24) // (MC) Writing Protect Key +// -------- MC_FSR : (MC Offset: 0x68) MC Flash Command Register -------- +#define AT91C_MC_SECURITY (0x1 << 4) // (MC) Security Bit Status +#define AT91C_MC_GPNVM0 (0x1 << 8) // (MC) Sector 0 Lock Status +#define AT91C_MC_GPNVM1 (0x1 << 9) // (MC) Sector 1 Lock Status +#define AT91C_MC_GPNVM2 (0x1 << 10) // (MC) Sector 2 Lock Status +#define AT91C_MC_GPNVM3 (0x1 << 11) // (MC) Sector 3 Lock Status +#define AT91C_MC_GPNVM4 (0x1 << 12) // (MC) Sector 4 Lock Status +#define AT91C_MC_GPNVM5 (0x1 << 13) // (MC) Sector 5 Lock Status +#define AT91C_MC_GPNVM6 (0x1 << 14) // (MC) Sector 6 Lock Status +#define AT91C_MC_GPNVM7 (0x1 << 15) // (MC) Sector 7 Lock Status +#define AT91C_MC_LOCKS0 (0x1 << 16) // (MC) Sector 0 Lock Status +#define AT91C_MC_LOCKS1 (0x1 << 17) // (MC) Sector 1 Lock Status +#define AT91C_MC_LOCKS2 (0x1 << 18) // (MC) Sector 2 Lock Status +#define AT91C_MC_LOCKS3 (0x1 << 19) // (MC) Sector 3 Lock Status +#define AT91C_MC_LOCKS4 (0x1 << 20) // (MC) Sector 4 Lock Status +#define AT91C_MC_LOCKS5 (0x1 << 21) // (MC) Sector 5 Lock Status +#define AT91C_MC_LOCKS6 (0x1 << 22) // (MC) Sector 6 Lock Status +#define AT91C_MC_LOCKS7 (0x1 << 23) // (MC) Sector 7 Lock Status +#define AT91C_MC_LOCKS8 (0x1 << 24) // (MC) Sector 8 Lock Status +#define AT91C_MC_LOCKS9 (0x1 << 25) // (MC) Sector 9 Lock Status +#define AT91C_MC_LOCKS10 (0x1 << 26) // (MC) Sector 10 Lock Status +#define AT91C_MC_LOCKS11 (0x1 << 27) // (MC) Sector 11 Lock Status +#define AT91C_MC_LOCKS12 (0x1 << 28) // (MC) Sector 12 Lock Status +#define AT91C_MC_LOCKS13 (0x1 << 29) // (MC) Sector 13 Lock Status +#define AT91C_MC_LOCKS14 (0x1 << 30) // (MC) Sector 14 Lock Status +#define AT91C_MC_LOCKS15 (0x1 << 31) // (MC) Sector 15 Lock Status + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Serial Parallel Interface +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_SPI { + AT91_REG SPI_CR; // Control Register + AT91_REG SPI_MR; // Mode Register + AT91_REG SPI_RDR; // Receive Data Register + AT91_REG SPI_TDR; // Transmit Data Register + AT91_REG SPI_SR; // Status Register + AT91_REG SPI_IER; // Interrupt Enable Register + AT91_REG SPI_IDR; // Interrupt Disable Register + AT91_REG SPI_IMR; // Interrupt Mask Register + AT91_REG Reserved0[4]; // + AT91_REG SPI_CSR[4]; // Chip Select Register + AT91_REG Reserved1[48]; // + AT91_REG SPI_RPR; // Receive Pointer Register + AT91_REG SPI_RCR; // Receive Counter Register + AT91_REG SPI_TPR; // Transmit Pointer Register + AT91_REG SPI_TCR; // Transmit Counter Register + AT91_REG SPI_RNPR; // Receive Next Pointer Register + AT91_REG SPI_RNCR; // Receive Next Counter Register + AT91_REG SPI_TNPR; // Transmit Next Pointer Register + AT91_REG SPI_TNCR; // Transmit Next Counter Register + AT91_REG SPI_PTCR; // PDC Transfer Control Register + AT91_REG SPI_PTSR; // PDC Transfer Status Register +} AT91S_SPI, *AT91PS_SPI; +#else +#define SPI_CR (AT91_CAST(AT91_REG *) 0x00000000) // (SPI_CR) Control Register +#define SPI_MR (AT91_CAST(AT91_REG *) 0x00000004) // (SPI_MR) Mode Register +#define SPI_RDR (AT91_CAST(AT91_REG *) 0x00000008) // (SPI_RDR) Receive Data Register +#define SPI_TDR (AT91_CAST(AT91_REG *) 0x0000000C) // (SPI_TDR) Transmit Data Register +#define SPI_SR (AT91_CAST(AT91_REG *) 0x00000010) // (SPI_SR) Status Register +#define SPI_IER (AT91_CAST(AT91_REG *) 0x00000014) // (SPI_IER) Interrupt Enable Register +#define SPI_IDR (AT91_CAST(AT91_REG *) 0x00000018) // (SPI_IDR) Interrupt Disable Register +#define SPI_IMR (AT91_CAST(AT91_REG *) 0x0000001C) // (SPI_IMR) Interrupt Mask Register +#define SPI_CSR (AT91_CAST(AT91_REG *) 0x00000030) // (SPI_CSR) Chip Select Register + +#endif +// -------- SPI_CR : (SPI Offset: 0x0) SPI Control Register -------- +#define AT91C_SPI_SPIEN (0x1 << 0) // (SPI) SPI Enable +#define AT91C_SPI_SPIDIS (0x1 << 1) // (SPI) SPI Disable +#define AT91C_SPI_SWRST (0x1 << 7) // (SPI) SPI Software reset +#define AT91C_SPI_LASTXFER (0x1 << 24) // (SPI) SPI Last Transfer +// -------- SPI_MR : (SPI Offset: 0x4) SPI Mode Register -------- +#define AT91C_SPI_MSTR (0x1 << 0) // (SPI) Master/Slave Mode +#define AT91C_SPI_PS (0x1 << 1) // (SPI) Peripheral Select +#define AT91C_SPI_PS_FIXED (0x0 << 1) // (SPI) Fixed Peripheral Select +#define AT91C_SPI_PS_VARIABLE (0x1 << 1) // (SPI) Variable Peripheral Select +#define AT91C_SPI_PCSDEC (0x1 << 2) // (SPI) Chip Select Decode +#define AT91C_SPI_FDIV (0x1 << 3) // (SPI) Clock Selection +#define AT91C_SPI_MODFDIS (0x1 << 4) // (SPI) Mode Fault Detection +#define AT91C_SPI_LLB (0x1 << 7) // (SPI) Clock Selection +#define AT91C_SPI_PCS (0xF << 16) // (SPI) Peripheral Chip Select +#define AT91C_SPI_DLYBCS (0xFF << 24) // (SPI) Delay Between Chip Selects +// -------- SPI_RDR : (SPI Offset: 0x8) Receive Data Register -------- +#define AT91C_SPI_RD (0xFFFF << 0) // (SPI) Receive Data +#define AT91C_SPI_RPCS (0xF << 16) // (SPI) Peripheral Chip Select Status +// -------- SPI_TDR : (SPI Offset: 0xc) Transmit Data Register -------- +#define AT91C_SPI_TD (0xFFFF << 0) // (SPI) Transmit Data +#define AT91C_SPI_TPCS (0xF << 16) // (SPI) Peripheral Chip Select Status +// -------- SPI_SR : (SPI Offset: 0x10) Status Register -------- +#define AT91C_SPI_RDRF (0x1 << 0) // (SPI) Receive Data Register Full +#define AT91C_SPI_TDRE (0x1 << 1) // (SPI) Transmit Data Register Empty +#define AT91C_SPI_MODF (0x1 << 2) // (SPI) Mode Fault Error +#define AT91C_SPI_OVRES (0x1 << 3) // (SPI) Overrun Error Status +#define AT91C_SPI_ENDRX (0x1 << 4) // (SPI) End of Receiver Transfer +#define AT91C_SPI_ENDTX (0x1 << 5) // (SPI) End of Receiver Transfer +#define AT91C_SPI_RXBUFF (0x1 << 6) // (SPI) RXBUFF Interrupt +#define AT91C_SPI_TXBUFE (0x1 << 7) // (SPI) TXBUFE Interrupt +#define AT91C_SPI_NSSR (0x1 << 8) // (SPI) NSSR Interrupt +#define AT91C_SPI_TXEMPTY (0x1 << 9) // (SPI) TXEMPTY Interrupt +#define AT91C_SPI_SPIENS (0x1 << 16) // (SPI) Enable Status +// -------- SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register -------- +// -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register -------- +// -------- SPI_IMR : (SPI Offset: 0x1c) Interrupt Mask Register -------- +// -------- SPI_CSR : (SPI Offset: 0x30) Chip Select Register -------- +#define AT91C_SPI_CPOL (0x1 << 0) // (SPI) Clock Polarity +#define AT91C_SPI_NCPHA (0x1 << 1) // (SPI) Clock Phase +#define AT91C_SPI_CSAAT (0x1 << 3) // (SPI) Chip Select Active After Transfer +#define AT91C_SPI_BITS (0xF << 4) // (SPI) Bits Per Transfer +#define AT91C_SPI_BITS_8 (0x0 << 4) // (SPI) 8 Bits Per transfer +#define AT91C_SPI_BITS_9 (0x1 << 4) // (SPI) 9 Bits Per transfer +#define AT91C_SPI_BITS_10 (0x2 << 4) // (SPI) 10 Bits Per transfer +#define AT91C_SPI_BITS_11 (0x3 << 4) // (SPI) 11 Bits Per transfer +#define AT91C_SPI_BITS_12 (0x4 << 4) // (SPI) 12 Bits Per transfer +#define AT91C_SPI_BITS_13 (0x5 << 4) // (SPI) 13 Bits Per transfer +#define AT91C_SPI_BITS_14 (0x6 << 4) // (SPI) 14 Bits Per transfer +#define AT91C_SPI_BITS_15 (0x7 << 4) // (SPI) 15 Bits Per transfer +#define AT91C_SPI_BITS_16 (0x8 << 4) // (SPI) 16 Bits Per transfer +#define AT91C_SPI_SCBR (0xFF << 8) // (SPI) Serial Clock Baud Rate +#define AT91C_SPI_DLYBS (0xFF << 16) // (SPI) Delay Before SPCK +#define AT91C_SPI_DLYBCT (0xFF << 24) // (SPI) Delay Between Consecutive Transfers + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Usart +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_USART { + AT91_REG US_CR; // Control Register + AT91_REG US_MR; // Mode Register + AT91_REG US_IER; // Interrupt Enable Register + AT91_REG US_IDR; // Interrupt Disable Register + AT91_REG US_IMR; // Interrupt Mask Register + AT91_REG US_CSR; // Channel Status Register + AT91_REG US_RHR; // Receiver Holding Register + AT91_REG US_THR; // Transmitter Holding Register + AT91_REG US_BRGR; // Baud Rate Generator Register + AT91_REG US_RTOR; // Receiver Time-out Register + AT91_REG US_TTGR; // Transmitter Time-guard Register + AT91_REG Reserved0[5]; // + AT91_REG US_FIDI; // FI_DI_Ratio Register + AT91_REG US_NER; // Nb Errors Register + AT91_REG Reserved1[1]; // + AT91_REG US_IF; // IRDA_FILTER Register + AT91_REG Reserved2[44]; // + AT91_REG US_RPR; // Receive Pointer Register + AT91_REG US_RCR; // Receive Counter Register + AT91_REG US_TPR; // Transmit Pointer Register + AT91_REG US_TCR; // Transmit Counter Register + AT91_REG US_RNPR; // Receive Next Pointer Register + AT91_REG US_RNCR; // Receive Next Counter Register + AT91_REG US_TNPR; // Transmit Next Pointer Register + AT91_REG US_TNCR; // Transmit Next Counter Register + AT91_REG US_PTCR; // PDC Transfer Control Register + AT91_REG US_PTSR; // PDC Transfer Status Register +} AT91S_USART, *AT91PS_USART; +#else +#define US_CR (AT91_CAST(AT91_REG *) 0x00000000) // (US_CR) Control Register +#define US_MR (AT91_CAST(AT91_REG *) 0x00000004) // (US_MR) Mode Register +#define US_IER (AT91_CAST(AT91_REG *) 0x00000008) // (US_IER) Interrupt Enable Register +#define US_IDR (AT91_CAST(AT91_REG *) 0x0000000C) // (US_IDR) Interrupt Disable Register +#define US_IMR (AT91_CAST(AT91_REG *) 0x00000010) // (US_IMR) Interrupt Mask Register +#define US_CSR (AT91_CAST(AT91_REG *) 0x00000014) // (US_CSR) Channel Status Register +#define US_RHR (AT91_CAST(AT91_REG *) 0x00000018) // (US_RHR) Receiver Holding Register +#define US_THR (AT91_CAST(AT91_REG *) 0x0000001C) // (US_THR) Transmitter Holding Register +#define US_BRGR (AT91_CAST(AT91_REG *) 0x00000020) // (US_BRGR) Baud Rate Generator Register +#define US_RTOR (AT91_CAST(AT91_REG *) 0x00000024) // (US_RTOR) Receiver Time-out Register +#define US_TTGR (AT91_CAST(AT91_REG *) 0x00000028) // (US_TTGR) Transmitter Time-guard Register +#define US_FIDI (AT91_CAST(AT91_REG *) 0x00000040) // (US_FIDI) FI_DI_Ratio Register +#define US_NER (AT91_CAST(AT91_REG *) 0x00000044) // (US_NER) Nb Errors Register +#define US_IF (AT91_CAST(AT91_REG *) 0x0000004C) // (US_IF) IRDA_FILTER Register + +#endif +// -------- US_CR : (USART Offset: 0x0) Debug Unit Control Register -------- +#define AT91C_US_STTBRK (0x1 << 9) // (USART) Start Break +#define AT91C_US_STPBRK (0x1 << 10) // (USART) Stop Break +#define AT91C_US_STTTO (0x1 << 11) // (USART) Start Time-out +#define AT91C_US_SENDA (0x1 << 12) // (USART) Send Address +#define AT91C_US_RSTIT (0x1 << 13) // (USART) Reset Iterations +#define AT91C_US_RSTNACK (0x1 << 14) // (USART) Reset Non Acknowledge +#define AT91C_US_RETTO (0x1 << 15) // (USART) Rearm Time-out +#define AT91C_US_DTREN (0x1 << 16) // (USART) Data Terminal ready Enable +#define AT91C_US_DTRDIS (0x1 << 17) // (USART) Data Terminal ready Disable +#define AT91C_US_RTSEN (0x1 << 18) // (USART) Request to Send enable +#define AT91C_US_RTSDIS (0x1 << 19) // (USART) Request to Send Disable +// -------- US_MR : (USART Offset: 0x4) Debug Unit Mode Register -------- +#define AT91C_US_USMODE (0xF << 0) // (USART) Usart mode +#define AT91C_US_USMODE_NORMAL (0x0) // (USART) Normal +#define AT91C_US_USMODE_RS485 (0x1) // (USART) RS485 +#define AT91C_US_USMODE_HWHSH (0x2) // (USART) Hardware Handshaking +#define AT91C_US_USMODE_MODEM (0x3) // (USART) Modem +#define AT91C_US_USMODE_ISO7816_0 (0x4) // (USART) ISO7816 protocol: T = 0 +#define AT91C_US_USMODE_ISO7816_1 (0x6) // (USART) ISO7816 protocol: T = 1 +#define AT91C_US_USMODE_IRDA (0x8) // (USART) IrDA +#define AT91C_US_USMODE_SWHSH (0xC) // (USART) Software Handshaking +#define AT91C_US_CLKS (0x3 << 4) // (USART) Clock Selection (Baud Rate generator Input Clock +#define AT91C_US_CLKS_CLOCK (0x0 << 4) // (USART) Clock +#define AT91C_US_CLKS_FDIV1 (0x1 << 4) // (USART) fdiv1 +#define AT91C_US_CLKS_SLOW (0x2 << 4) // (USART) slow_clock (ARM) +#define AT91C_US_CLKS_EXT (0x3 << 4) // (USART) External (SCK) +#define AT91C_US_CHRL (0x3 << 6) // (USART) Clock Selection (Baud Rate generator Input Clock +#define AT91C_US_CHRL_5_BITS (0x0 << 6) // (USART) Character Length: 5 bits +#define AT91C_US_CHRL_6_BITS (0x1 << 6) // (USART) Character Length: 6 bits +#define AT91C_US_CHRL_7_BITS (0x2 << 6) // (USART) Character Length: 7 bits +#define AT91C_US_CHRL_8_BITS (0x3 << 6) // (USART) Character Length: 8 bits +#define AT91C_US_SYNC (0x1 << 8) // (USART) Synchronous Mode Select +#define AT91C_US_NBSTOP (0x3 << 12) // (USART) Number of Stop bits +#define AT91C_US_NBSTOP_1_BIT (0x0 << 12) // (USART) 1 stop bit +#define AT91C_US_NBSTOP_15_BIT (0x1 << 12) // (USART) Asynchronous (SYNC=0) 2 stop bits Synchronous (SYNC=1) 2 stop bits +#define AT91C_US_NBSTOP_2_BIT (0x2 << 12) // (USART) 2 stop bits +#define AT91C_US_MSBF (0x1 << 16) // (USART) Bit Order +#define AT91C_US_MODE9 (0x1 << 17) // (USART) 9-bit Character length +#define AT91C_US_CKLO (0x1 << 18) // (USART) Clock Output Select +#define AT91C_US_OVER (0x1 << 19) // (USART) Over Sampling Mode +#define AT91C_US_INACK (0x1 << 20) // (USART) Inhibit Non Acknowledge +#define AT91C_US_DSNACK (0x1 << 21) // (USART) Disable Successive NACK +#define AT91C_US_MAX_ITER (0x1 << 24) // (USART) Number of Repetitions +#define AT91C_US_FILTER (0x1 << 28) // (USART) Receive Line Filter +// -------- US_IER : (USART Offset: 0x8) Debug Unit Interrupt Enable Register -------- +#define AT91C_US_RXBRK (0x1 << 2) // (USART) Break Received/End of Break +#define AT91C_US_TIMEOUT (0x1 << 8) // (USART) Receiver Time-out +#define AT91C_US_ITERATION (0x1 << 10) // (USART) Max number of Repetitions Reached +#define AT91C_US_NACK (0x1 << 13) // (USART) Non Acknowledge +#define AT91C_US_RIIC (0x1 << 16) // (USART) Ring INdicator Input Change Flag +#define AT91C_US_DSRIC (0x1 << 17) // (USART) Data Set Ready Input Change Flag +#define AT91C_US_DCDIC (0x1 << 18) // (USART) Data Carrier Flag +#define AT91C_US_CTSIC (0x1 << 19) // (USART) Clear To Send Input Change Flag +// -------- US_IDR : (USART Offset: 0xc) Debug Unit Interrupt Disable Register -------- +// -------- US_IMR : (USART Offset: 0x10) Debug Unit Interrupt Mask Register -------- +// -------- US_CSR : (USART Offset: 0x14) Debug Unit Channel Status Register -------- +#define AT91C_US_RI (0x1 << 20) // (USART) Image of RI Input +#define AT91C_US_DSR (0x1 << 21) // (USART) Image of DSR Input +#define AT91C_US_DCD (0x1 << 22) // (USART) Image of DCD Input +#define AT91C_US_CTS (0x1 << 23) // (USART) Image of CTS Input + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Synchronous Serial Controller Interface +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_SSC { + AT91_REG SSC_CR; // Control Register + AT91_REG SSC_CMR; // Clock Mode Register + AT91_REG Reserved0[2]; // + AT91_REG SSC_RCMR; // Receive Clock ModeRegister + AT91_REG SSC_RFMR; // Receive Frame Mode Register + AT91_REG SSC_TCMR; // Transmit Clock Mode Register + AT91_REG SSC_TFMR; // Transmit Frame Mode Register + AT91_REG SSC_RHR; // Receive Holding Register + AT91_REG SSC_THR; // Transmit Holding Register + AT91_REG Reserved1[2]; // + AT91_REG SSC_RSHR; // Receive Sync Holding Register + AT91_REG SSC_TSHR; // Transmit Sync Holding Register + AT91_REG Reserved2[2]; // + AT91_REG SSC_SR; // Status Register + AT91_REG SSC_IER; // Interrupt Enable Register + AT91_REG SSC_IDR; // Interrupt Disable Register + AT91_REG SSC_IMR; // Interrupt Mask Register + AT91_REG Reserved3[44]; // + AT91_REG SSC_RPR; // Receive Pointer Register + AT91_REG SSC_RCR; // Receive Counter Register + AT91_REG SSC_TPR; // Transmit Pointer Register + AT91_REG SSC_TCR; // Transmit Counter Register + AT91_REG SSC_RNPR; // Receive Next Pointer Register + AT91_REG SSC_RNCR; // Receive Next Counter Register + AT91_REG SSC_TNPR; // Transmit Next Pointer Register + AT91_REG SSC_TNCR; // Transmit Next Counter Register + AT91_REG SSC_PTCR; // PDC Transfer Control Register + AT91_REG SSC_PTSR; // PDC Transfer Status Register +} AT91S_SSC, *AT91PS_SSC; +#else +#define SSC_CR (AT91_CAST(AT91_REG *) 0x00000000) // (SSC_CR) Control Register +#define SSC_CMR (AT91_CAST(AT91_REG *) 0x00000004) // (SSC_CMR) Clock Mode Register +#define SSC_RCMR (AT91_CAST(AT91_REG *) 0x00000010) // (SSC_RCMR) Receive Clock ModeRegister +#define SSC_RFMR (AT91_CAST(AT91_REG *) 0x00000014) // (SSC_RFMR) Receive Frame Mode Register +#define SSC_TCMR (AT91_CAST(AT91_REG *) 0x00000018) // (SSC_TCMR) Transmit Clock Mode Register +#define SSC_TFMR (AT91_CAST(AT91_REG *) 0x0000001C) // (SSC_TFMR) Transmit Frame Mode Register +#define SSC_RHR (AT91_CAST(AT91_REG *) 0x00000020) // (SSC_RHR) Receive Holding Register +#define SSC_THR (AT91_CAST(AT91_REG *) 0x00000024) // (SSC_THR) Transmit Holding Register +#define SSC_RSHR (AT91_CAST(AT91_REG *) 0x00000030) // (SSC_RSHR) Receive Sync Holding Register +#define SSC_TSHR (AT91_CAST(AT91_REG *) 0x00000034) // (SSC_TSHR) Transmit Sync Holding Register +#define SSC_SR (AT91_CAST(AT91_REG *) 0x00000040) // (SSC_SR) Status Register +#define SSC_IER (AT91_CAST(AT91_REG *) 0x00000044) // (SSC_IER) Interrupt Enable Register +#define SSC_IDR (AT91_CAST(AT91_REG *) 0x00000048) // (SSC_IDR) Interrupt Disable Register +#define SSC_IMR (AT91_CAST(AT91_REG *) 0x0000004C) // (SSC_IMR) Interrupt Mask Register + +#endif +// -------- SSC_CR : (SSC Offset: 0x0) SSC Control Register -------- +#define AT91C_SSC_RXEN (0x1 << 0) // (SSC) Receive Enable +#define AT91C_SSC_RXDIS (0x1 << 1) // (SSC) Receive Disable +#define AT91C_SSC_TXEN (0x1 << 8) // (SSC) Transmit Enable +#define AT91C_SSC_TXDIS (0x1 << 9) // (SSC) Transmit Disable +#define AT91C_SSC_SWRST (0x1 << 15) // (SSC) Software Reset +// -------- SSC_RCMR : (SSC Offset: 0x10) SSC Receive Clock Mode Register -------- +#define AT91C_SSC_CKS (0x3 << 0) // (SSC) Receive/Transmit Clock Selection +#define AT91C_SSC_CKS_DIV (0x0) // (SSC) Divided Clock +#define AT91C_SSC_CKS_TK (0x1) // (SSC) TK Clock signal +#define AT91C_SSC_CKS_RK (0x2) // (SSC) RK pin +#define AT91C_SSC_CKO (0x7 << 2) // (SSC) Receive/Transmit Clock Output Mode Selection +#define AT91C_SSC_CKO_NONE (0x0 << 2) // (SSC) Receive/Transmit Clock Output Mode: None RK pin: Input-only +#define AT91C_SSC_CKO_CONTINOUS (0x1 << 2) // (SSC) Continuous Receive/Transmit Clock RK pin: Output +#define AT91C_SSC_CKO_DATA_TX (0x2 << 2) // (SSC) Receive/Transmit Clock only during data transfers RK pin: Output +#define AT91C_SSC_CKI (0x1 << 5) // (SSC) Receive/Transmit Clock Inversion +#define AT91C_SSC_CKG (0x3 << 6) // (SSC) Receive/Transmit Clock Gating Selection +#define AT91C_SSC_CKG_NONE (0x0 << 6) // (SSC) Receive/Transmit Clock Gating: None, continuous clock +#define AT91C_SSC_CKG_LOW (0x1 << 6) // (SSC) Receive/Transmit Clock enabled only if RF Low +#define AT91C_SSC_CKG_HIGH (0x2 << 6) // (SSC) Receive/Transmit Clock enabled only if RF High +#define AT91C_SSC_START (0xF << 8) // (SSC) Receive/Transmit Start Selection +#define AT91C_SSC_START_CONTINOUS (0x0 << 8) // (SSC) Continuous, as soon as the receiver is enabled, and immediately after the end of transfer of the previous data. +#define AT91C_SSC_START_TX (0x1 << 8) // (SSC) Transmit/Receive start +#define AT91C_SSC_START_LOW_RF (0x2 << 8) // (SSC) Detection of a low level on RF input +#define AT91C_SSC_START_HIGH_RF (0x3 << 8) // (SSC) Detection of a high level on RF input +#define AT91C_SSC_START_FALL_RF (0x4 << 8) // (SSC) Detection of a falling edge on RF input +#define AT91C_SSC_START_RISE_RF (0x5 << 8) // (SSC) Detection of a rising edge on RF input +#define AT91C_SSC_START_LEVEL_RF (0x6 << 8) // (SSC) Detection of any level change on RF input +#define AT91C_SSC_START_EDGE_RF (0x7 << 8) // (SSC) Detection of any edge on RF input +#define AT91C_SSC_START_0 (0x8 << 8) // (SSC) Compare 0 +#define AT91C_SSC_STOP (0x1 << 12) // (SSC) Receive Stop Selection +#define AT91C_SSC_STTDLY (0xFF << 16) // (SSC) Receive/Transmit Start Delay +#define AT91C_SSC_PERIOD (0xFF << 24) // (SSC) Receive/Transmit Period Divider Selection +// -------- SSC_RFMR : (SSC Offset: 0x14) SSC Receive Frame Mode Register -------- +#define AT91C_SSC_DATLEN (0x1F << 0) // (SSC) Data Length +#define AT91C_SSC_LOOP (0x1 << 5) // (SSC) Loop Mode +#define AT91C_SSC_MSBF (0x1 << 7) // (SSC) Most Significant Bit First +#define AT91C_SSC_DATNB (0xF << 8) // (SSC) Data Number per Frame +#define AT91C_SSC_FSLEN (0xF << 16) // (SSC) Receive/Transmit Frame Sync length +#define AT91C_SSC_FSOS (0x7 << 20) // (SSC) Receive/Transmit Frame Sync Output Selection +#define AT91C_SSC_FSOS_NONE (0x0 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: None RK pin Input-only +#define AT91C_SSC_FSOS_NEGATIVE (0x1 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Negative Pulse +#define AT91C_SSC_FSOS_POSITIVE (0x2 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Positive Pulse +#define AT91C_SSC_FSOS_LOW (0x3 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Driver Low during data transfer +#define AT91C_SSC_FSOS_HIGH (0x4 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Driver High during data transfer +#define AT91C_SSC_FSOS_TOGGLE (0x5 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Toggling at each start of data transfer +#define AT91C_SSC_FSEDGE (0x1 << 24) // (SSC) Frame Sync Edge Detection +// -------- SSC_TCMR : (SSC Offset: 0x18) SSC Transmit Clock Mode Register -------- +// -------- SSC_TFMR : (SSC Offset: 0x1c) SSC Transmit Frame Mode Register -------- +#define AT91C_SSC_DATDEF (0x1 << 5) // (SSC) Data Default Value +#define AT91C_SSC_FSDEN (0x1 << 23) // (SSC) Frame Sync Data Enable +// -------- SSC_SR : (SSC Offset: 0x40) SSC Status Register -------- +#define AT91C_SSC_TXRDY (0x1 << 0) // (SSC) Transmit Ready +#define AT91C_SSC_TXEMPTY (0x1 << 1) // (SSC) Transmit Empty +#define AT91C_SSC_ENDTX (0x1 << 2) // (SSC) End Of Transmission +#define AT91C_SSC_TXBUFE (0x1 << 3) // (SSC) Transmit Buffer Empty +#define AT91C_SSC_RXRDY (0x1 << 4) // (SSC) Receive Ready +#define AT91C_SSC_OVRUN (0x1 << 5) // (SSC) Receive Overrun +#define AT91C_SSC_ENDRX (0x1 << 6) // (SSC) End of Reception +#define AT91C_SSC_RXBUFF (0x1 << 7) // (SSC) Receive Buffer Full +#define AT91C_SSC_CP0 (0x1 << 8) // (SSC) Compare 0 +#define AT91C_SSC_CP1 (0x1 << 9) // (SSC) Compare 1 +#define AT91C_SSC_TXSYN (0x1 << 10) // (SSC) Transmit Sync +#define AT91C_SSC_RXSYN (0x1 << 11) // (SSC) Receive Sync +#define AT91C_SSC_TXENA (0x1 << 16) // (SSC) Transmit Enable +#define AT91C_SSC_RXENA (0x1 << 17) // (SSC) Receive Enable +// -------- SSC_IER : (SSC Offset: 0x44) SSC Interrupt Enable Register -------- +// -------- SSC_IDR : (SSC Offset: 0x48) SSC Interrupt Disable Register -------- +// -------- SSC_IMR : (SSC Offset: 0x4c) SSC Interrupt Mask Register -------- + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Two-wire Interface +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_TWI { + AT91_REG TWI_CR; // Control Register + AT91_REG TWI_MMR; // Master Mode Register + AT91_REG Reserved0[1]; // + AT91_REG TWI_IADR; // Internal Address Register + AT91_REG TWI_CWGR; // Clock Waveform Generator Register + AT91_REG Reserved1[3]; // + AT91_REG TWI_SR; // Status Register + AT91_REG TWI_IER; // Interrupt Enable Register + AT91_REG TWI_IDR; // Interrupt Disable Register + AT91_REG TWI_IMR; // Interrupt Mask Register + AT91_REG TWI_RHR; // Receive Holding Register + AT91_REG TWI_THR; // Transmit Holding Register + AT91_REG Reserved2[50]; // + AT91_REG TWI_RPR; // Receive Pointer Register + AT91_REG TWI_RCR; // Receive Counter Register + AT91_REG TWI_TPR; // Transmit Pointer Register + AT91_REG TWI_TCR; // Transmit Counter Register + AT91_REG TWI_RNPR; // Receive Next Pointer Register + AT91_REG TWI_RNCR; // Receive Next Counter Register + AT91_REG TWI_TNPR; // Transmit Next Pointer Register + AT91_REG TWI_TNCR; // Transmit Next Counter Register + AT91_REG TWI_PTCR; // PDC Transfer Control Register + AT91_REG TWI_PTSR; // PDC Transfer Status Register +} AT91S_TWI, *AT91PS_TWI; +#else +#define TWI_CR (AT91_CAST(AT91_REG *) 0x00000000) // (TWI_CR) Control Register +#define TWI_MMR (AT91_CAST(AT91_REG *) 0x00000004) // (TWI_MMR) Master Mode Register +#define TWI_IADR (AT91_CAST(AT91_REG *) 0x0000000C) // (TWI_IADR) Internal Address Register +#define TWI_CWGR (AT91_CAST(AT91_REG *) 0x00000010) // (TWI_CWGR) Clock Waveform Generator Register +#define TWI_SR (AT91_CAST(AT91_REG *) 0x00000020) // (TWI_SR) Status Register +#define TWI_IER (AT91_CAST(AT91_REG *) 0x00000024) // (TWI_IER) Interrupt Enable Register +#define TWI_IDR (AT91_CAST(AT91_REG *) 0x00000028) // (TWI_IDR) Interrupt Disable Register +#define TWI_IMR (AT91_CAST(AT91_REG *) 0x0000002C) // (TWI_IMR) Interrupt Mask Register +#define TWI_RHR (AT91_CAST(AT91_REG *) 0x00000030) // (TWI_RHR) Receive Holding Register +#define TWI_THR (AT91_CAST(AT91_REG *) 0x00000034) // (TWI_THR) Transmit Holding Register + +#endif +// -------- TWI_CR : (TWI Offset: 0x0) TWI Control Register -------- +#define AT91C_TWI_START (0x1 << 0) // (TWI) Send a START Condition +#define AT91C_TWI_STOP (0x1 << 1) // (TWI) Send a STOP Condition +#define AT91C_TWI_MSEN (0x1 << 2) // (TWI) TWI Master Transfer Enabled +#define AT91C_TWI_MSDIS (0x1 << 3) // (TWI) TWI Master Transfer Disabled +#define AT91C_TWI_SWRST (0x1 << 7) // (TWI) Software Reset +// -------- TWI_MMR : (TWI Offset: 0x4) TWI Master Mode Register -------- +#define AT91C_TWI_IADRSZ (0x3 << 8) // (TWI) Internal Device Address Size +#define AT91C_TWI_IADRSZ_NO (0x0 << 8) // (TWI) No internal device address +#define AT91C_TWI_IADRSZ_1_BYTE (0x1 << 8) // (TWI) One-byte internal device address +#define AT91C_TWI_IADRSZ_2_BYTE (0x2 << 8) // (TWI) Two-byte internal device address +#define AT91C_TWI_IADRSZ_3_BYTE (0x3 << 8) // (TWI) Three-byte internal device address +#define AT91C_TWI_MREAD (0x1 << 12) // (TWI) Master Read Direction +#define AT91C_TWI_DADR (0x7F << 16) // (TWI) Device Address +// -------- TWI_CWGR : (TWI Offset: 0x10) TWI Clock Waveform Generator Register -------- +#define AT91C_TWI_CLDIV (0xFF << 0) // (TWI) Clock Low Divider +#define AT91C_TWI_CHDIV (0xFF << 8) // (TWI) Clock High Divider +#define AT91C_TWI_CKDIV (0x7 << 16) // (TWI) Clock Divider +// -------- TWI_SR : (TWI Offset: 0x20) TWI Status Register -------- +#define AT91C_TWI_TXCOMP (0x1 << 0) // (TWI) Transmission Completed +#define AT91C_TWI_RXRDY (0x1 << 1) // (TWI) Receive holding register ReaDY +#define AT91C_TWI_TXRDY (0x1 << 2) // (TWI) Transmit holding register ReaDY +#define AT91C_TWI_OVRE (0x1 << 6) // (TWI) Overrun Error +#define AT91C_TWI_UNRE (0x1 << 7) // (TWI) Underrun Error +#define AT91C_TWI_NACK (0x1 << 8) // (TWI) Not Acknowledged +#define AT91C_TWI_ENDRX (0x1 << 12) // (TWI) +#define AT91C_TWI_ENDTX (0x1 << 13) // (TWI) +#define AT91C_TWI_RXBUFF (0x1 << 14) // (TWI) +#define AT91C_TWI_TXBUFE (0x1 << 15) // (TWI) +// -------- TWI_IER : (TWI Offset: 0x24) TWI Interrupt Enable Register -------- +// -------- TWI_IDR : (TWI Offset: 0x28) TWI Interrupt Disable Register -------- +// -------- TWI_IMR : (TWI Offset: 0x2c) TWI Interrupt Mask Register -------- + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR PWMC Channel Interface +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_PWMC_CH { + AT91_REG PWMC_CMR; // Channel Mode Register + AT91_REG PWMC_CDTYR; // Channel Duty Cycle Register + AT91_REG PWMC_CPRDR; // Channel Period Register + AT91_REG PWMC_CCNTR; // Channel Counter Register + AT91_REG PWMC_CUPDR; // Channel Update Register + AT91_REG PWMC_Reserved[3]; // Reserved +} AT91S_PWMC_CH, *AT91PS_PWMC_CH; +#else +#define PWMC_CMR (AT91_CAST(AT91_REG *) 0x00000000) // (PWMC_CMR) Channel Mode Register +#define PWMC_CDTYR (AT91_CAST(AT91_REG *) 0x00000004) // (PWMC_CDTYR) Channel Duty Cycle Register +#define PWMC_CPRDR (AT91_CAST(AT91_REG *) 0x00000008) // (PWMC_CPRDR) Channel Period Register +#define PWMC_CCNTR (AT91_CAST(AT91_REG *) 0x0000000C) // (PWMC_CCNTR) Channel Counter Register +#define PWMC_CUPDR (AT91_CAST(AT91_REG *) 0x00000010) // (PWMC_CUPDR) Channel Update Register +#define Reserved (AT91_CAST(AT91_REG *) 0x00000014) // (Reserved) Reserved + +#endif +// -------- PWMC_CMR : (PWMC_CH Offset: 0x0) PWMC Channel Mode Register -------- +#define AT91C_PWMC_CPRE (0xF << 0) // (PWMC_CH) Channel Pre-scaler : PWMC_CLKx +#define AT91C_PWMC_CPRE_MCK (0x0) // (PWMC_CH) +#define AT91C_PWMC_CPRE_MCKA (0xB) // (PWMC_CH) +#define AT91C_PWMC_CPRE_MCKB (0xC) // (PWMC_CH) +#define AT91C_PWMC_CALG (0x1 << 8) // (PWMC_CH) Channel Alignment +#define AT91C_PWMC_CPOL (0x1 << 9) // (PWMC_CH) Channel Polarity +#define AT91C_PWMC_CPD (0x1 << 10) // (PWMC_CH) Channel Update Period +// -------- PWMC_CDTYR : (PWMC_CH Offset: 0x4) PWMC Channel Duty Cycle Register -------- +#define AT91C_PWMC_CDTY (0x0 << 0) // (PWMC_CH) Channel Duty Cycle +// -------- PWMC_CPRDR : (PWMC_CH Offset: 0x8) PWMC Channel Period Register -------- +#define AT91C_PWMC_CPRD (0x0 << 0) // (PWMC_CH) Channel Period +// -------- PWMC_CCNTR : (PWMC_CH Offset: 0xc) PWMC Channel Counter Register -------- +#define AT91C_PWMC_CCNT (0x0 << 0) // (PWMC_CH) Channel Counter +// -------- PWMC_CUPDR : (PWMC_CH Offset: 0x10) PWMC Channel Update Register -------- +#define AT91C_PWMC_CUPD (0x0 << 0) // (PWMC_CH) Channel Update + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Pulse Width Modulation Controller Interface +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_PWMC { + AT91_REG PWMC_MR; // PWMC Mode Register + AT91_REG PWMC_ENA; // PWMC Enable Register + AT91_REG PWMC_DIS; // PWMC Disable Register + AT91_REG PWMC_SR; // PWMC Status Register + AT91_REG PWMC_IER; // PWMC Interrupt Enable Register + AT91_REG PWMC_IDR; // PWMC Interrupt Disable Register + AT91_REG PWMC_IMR; // PWMC Interrupt Mask Register + AT91_REG PWMC_ISR; // PWMC Interrupt Status Register + AT91_REG Reserved0[55]; // + AT91_REG PWMC_VR; // PWMC Version Register + AT91_REG Reserved1[64]; // + AT91S_PWMC_CH PWMC_CH[4]; // PWMC Channel +} AT91S_PWMC, *AT91PS_PWMC; +#else +#define PWMC_MR (AT91_CAST(AT91_REG *) 0x00000000) // (PWMC_MR) PWMC Mode Register +#define PWMC_ENA (AT91_CAST(AT91_REG *) 0x00000004) // (PWMC_ENA) PWMC Enable Register +#define PWMC_DIS (AT91_CAST(AT91_REG *) 0x00000008) // (PWMC_DIS) PWMC Disable Register +#define PWMC_SR (AT91_CAST(AT91_REG *) 0x0000000C) // (PWMC_SR) PWMC Status Register +#define PWMC_IER (AT91_CAST(AT91_REG *) 0x00000010) // (PWMC_IER) PWMC Interrupt Enable Register +#define PWMC_IDR (AT91_CAST(AT91_REG *) 0x00000014) // (PWMC_IDR) PWMC Interrupt Disable Register +#define PWMC_IMR (AT91_CAST(AT91_REG *) 0x00000018) // (PWMC_IMR) PWMC Interrupt Mask Register +#define PWMC_ISR (AT91_CAST(AT91_REG *) 0x0000001C) // (PWMC_ISR) PWMC Interrupt Status Register +#define PWMC_VR (AT91_CAST(AT91_REG *) 0x000000FC) // (PWMC_VR) PWMC Version Register + +#endif +// -------- PWMC_MR : (PWMC Offset: 0x0) PWMC Mode Register -------- +#define AT91C_PWMC_DIVA (0xFF << 0) // (PWMC) CLKA divide factor. +#define AT91C_PWMC_PREA (0xF << 8) // (PWMC) Divider Input Clock Prescaler A +#define AT91C_PWMC_PREA_MCK (0x0 << 8) // (PWMC) +#define AT91C_PWMC_DIVB (0xFF << 16) // (PWMC) CLKB divide factor. +#define AT91C_PWMC_PREB (0xF << 24) // (PWMC) Divider Input Clock Prescaler B +#define AT91C_PWMC_PREB_MCK (0x0 << 24) // (PWMC) +// -------- PWMC_ENA : (PWMC Offset: 0x4) PWMC Enable Register -------- +#define AT91C_PWMC_CHID0 (0x1 << 0) // (PWMC) Channel ID 0 +#define AT91C_PWMC_CHID1 (0x1 << 1) // (PWMC) Channel ID 1 +#define AT91C_PWMC_CHID2 (0x1 << 2) // (PWMC) Channel ID 2 +#define AT91C_PWMC_CHID3 (0x1 << 3) // (PWMC) Channel ID 3 +// -------- PWMC_DIS : (PWMC Offset: 0x8) PWMC Disable Register -------- +// -------- PWMC_SR : (PWMC Offset: 0xc) PWMC Status Register -------- +// -------- PWMC_IER : (PWMC Offset: 0x10) PWMC Interrupt Enable Register -------- +// -------- PWMC_IDR : (PWMC Offset: 0x14) PWMC Interrupt Disable Register -------- +// -------- PWMC_IMR : (PWMC Offset: 0x18) PWMC Interrupt Mask Register -------- +// -------- PWMC_ISR : (PWMC Offset: 0x1c) PWMC Interrupt Status Register -------- + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR USB Device Interface +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_UDP { + AT91_REG UDP_NUM; // Frame Number Register + AT91_REG UDP_GLBSTATE; // Global State Register + AT91_REG UDP_FADDR; // Function Address Register + AT91_REG Reserved0[1]; // + AT91_REG UDP_IER; // Interrupt Enable Register + AT91_REG UDP_IDR; // Interrupt Disable Register + AT91_REG UDP_IMR; // Interrupt Mask Register + AT91_REG UDP_ISR; // Interrupt Status Register + AT91_REG UDP_ICR; // Interrupt Clear Register + AT91_REG Reserved1[1]; // + AT91_REG UDP_RSTEP; // Reset Endpoint Register + AT91_REG Reserved2[1]; // + AT91_REG UDP_CSR[6]; // Endpoint Control and Status Register + AT91_REG Reserved3[2]; // + AT91_REG UDP_FDR[6]; // Endpoint FIFO Data Register + AT91_REG Reserved4[3]; // + AT91_REG UDP_TXVC; // Transceiver Control Register +} AT91S_UDP, *AT91PS_UDP; +#else +#define UDP_FRM_NUM (AT91_CAST(AT91_REG *) 0x00000000) // (UDP_FRM_NUM) Frame Number Register +#define UDP_GLBSTATE (AT91_CAST(AT91_REG *) 0x00000004) // (UDP_GLBSTATE) Global State Register +#define UDP_FADDR (AT91_CAST(AT91_REG *) 0x00000008) // (UDP_FADDR) Function Address Register +#define UDP_IER (AT91_CAST(AT91_REG *) 0x00000010) // (UDP_IER) Interrupt Enable Register +#define UDP_IDR (AT91_CAST(AT91_REG *) 0x00000014) // (UDP_IDR) Interrupt Disable Register +#define UDP_IMR (AT91_CAST(AT91_REG *) 0x00000018) // (UDP_IMR) Interrupt Mask Register +#define UDP_ISR (AT91_CAST(AT91_REG *) 0x0000001C) // (UDP_ISR) Interrupt Status Register +#define UDP_ICR (AT91_CAST(AT91_REG *) 0x00000020) // (UDP_ICR) Interrupt Clear Register +#define UDP_RSTEP (AT91_CAST(AT91_REG *) 0x00000028) // (UDP_RSTEP) Reset Endpoint Register +#define UDP_CSR (AT91_CAST(AT91_REG *) 0x00000030) // (UDP_CSR) Endpoint Control and Status Register +#define UDP_FDR (AT91_CAST(AT91_REG *) 0x00000050) // (UDP_FDR) Endpoint FIFO Data Register +#define UDP_TXVC (AT91_CAST(AT91_REG *) 0x00000074) // (UDP_TXVC) Transceiver Control Register + +#endif +// -------- UDP_FRM_NUM : (UDP Offset: 0x0) USB Frame Number Register -------- +#define AT91C_UDP_FRM_NUM (0x7FF << 0) // (UDP) Frame Number as Defined in the Packet Field Formats +#define AT91C_UDP_FRM_ERR (0x1 << 16) // (UDP) Frame Error +#define AT91C_UDP_FRM_OK (0x1 << 17) // (UDP) Frame OK +// -------- UDP_GLB_STATE : (UDP Offset: 0x4) USB Global State Register -------- +#define AT91C_UDP_FADDEN (0x1 << 0) // (UDP) Function Address Enable +#define AT91C_UDP_CONFG (0x1 << 1) // (UDP) Configured +#define AT91C_UDP_ESR (0x1 << 2) // (UDP) Enable Send Resume +#define AT91C_UDP_RSMINPR (0x1 << 3) // (UDP) A Resume Has Been Sent to the Host +#define AT91C_UDP_RMWUPE (0x1 << 4) // (UDP) Remote Wake Up Enable +// -------- UDP_FADDR : (UDP Offset: 0x8) USB Function Address Register -------- +#define AT91C_UDP_FADD (0xFF << 0) // (UDP) Function Address Value +#define AT91C_UDP_FEN (0x1 << 8) // (UDP) Function Enable +// -------- UDP_IER : (UDP Offset: 0x10) USB Interrupt Enable Register -------- +#define AT91C_UDP_EPINT0 (0x1 << 0) // (UDP) Endpoint 0 Interrupt +#define AT91C_UDP_EPINT1 (0x1 << 1) // (UDP) Endpoint 0 Interrupt +#define AT91C_UDP_EPINT2 (0x1 << 2) // (UDP) Endpoint 2 Interrupt +#define AT91C_UDP_EPINT3 (0x1 << 3) // (UDP) Endpoint 3 Interrupt +#define AT91C_UDP_EPINT4 (0x1 << 4) // (UDP) Endpoint 4 Interrupt +#define AT91C_UDP_EPINT5 (0x1 << 5) // (UDP) Endpoint 5 Interrupt +#define AT91C_UDP_RXSUSP (0x1 << 8) // (UDP) USB Suspend Interrupt +#define AT91C_UDP_RXRSM (0x1 << 9) // (UDP) USB Resume Interrupt +#define AT91C_UDP_EXTRSM (0x1 << 10) // (UDP) USB External Resume Interrupt +#define AT91C_UDP_SOFINT (0x1 << 11) // (UDP) USB Start Of frame Interrupt +#define AT91C_UDP_WAKEUP (0x1 << 13) // (UDP) USB Resume Interrupt +// -------- UDP_IDR : (UDP Offset: 0x14) USB Interrupt Disable Register -------- +// -------- UDP_IMR : (UDP Offset: 0x18) USB Interrupt Mask Register -------- +// -------- UDP_ISR : (UDP Offset: 0x1c) USB Interrupt Status Register -------- +#define AT91C_UDP_ENDBUSRES (0x1 << 12) // (UDP) USB End Of Bus Reset Interrupt +// -------- UDP_ICR : (UDP Offset: 0x20) USB Interrupt Clear Register -------- +// -------- UDP_RST_EP : (UDP Offset: 0x28) USB Reset Endpoint Register -------- +#define AT91C_UDP_EP0 (0x1 << 0) // (UDP) Reset Endpoint 0 +#define AT91C_UDP_EP1 (0x1 << 1) // (UDP) Reset Endpoint 1 +#define AT91C_UDP_EP2 (0x1 << 2) // (UDP) Reset Endpoint 2 +#define AT91C_UDP_EP3 (0x1 << 3) // (UDP) Reset Endpoint 3 +#define AT91C_UDP_EP4 (0x1 << 4) // (UDP) Reset Endpoint 4 +#define AT91C_UDP_EP5 (0x1 << 5) // (UDP) Reset Endpoint 5 +// -------- UDP_CSR : (UDP Offset: 0x30) USB Endpoint Control and Status Register -------- +#define AT91C_UDP_TXCOMP (0x1 << 0) // (UDP) Generates an IN packet with data previously written in the DPR +#define AT91C_UDP_RX_DATA_BK0 (0x1 << 1) // (UDP) Receive Data Bank 0 +#define AT91C_UDP_RXSETUP (0x1 << 2) // (UDP) Sends STALL to the Host (Control endpoints) +#define AT91C_UDP_ISOERROR (0x1 << 3) // (UDP) Isochronous error (Isochronous endpoints) +#define AT91C_UDP_STALLSENT (0x1 << 3) // (UDP) Stall sent (Control, bulk, interrupt endpoints) +#define AT91C_UDP_TXPKTRDY (0x1 << 4) // (UDP) Transmit Packet Ready +#define AT91C_UDP_FORCESTALL (0x1 << 5) // (UDP) Force Stall (used by Control, Bulk and Isochronous endpoints). +#define AT91C_UDP_RX_DATA_BK1 (0x1 << 6) // (UDP) Receive Data Bank 1 (only used by endpoints with ping-pong attributes). +#define AT91C_UDP_DIR (0x1 << 7) // (UDP) Transfer Direction +#define AT91C_UDP_EPTYPE (0x7 << 8) // (UDP) Endpoint type +#define AT91C_UDP_EPTYPE_CTRL (0x0 << 8) // (UDP) Control +#define AT91C_UDP_EPTYPE_ISO_OUT (0x1 << 8) // (UDP) Isochronous OUT +#define AT91C_UDP_EPTYPE_BULK_OUT (0x2 << 8) // (UDP) Bulk OUT +#define AT91C_UDP_EPTYPE_INT_OUT (0x3 << 8) // (UDP) Interrupt OUT +#define AT91C_UDP_EPTYPE_ISO_IN (0x5 << 8) // (UDP) Isochronous IN +#define AT91C_UDP_EPTYPE_BULK_IN (0x6 << 8) // (UDP) Bulk IN +#define AT91C_UDP_EPTYPE_INT_IN (0x7 << 8) // (UDP) Interrupt IN +#define AT91C_UDP_DTGLE (0x1 << 11) // (UDP) Data Toggle +#define AT91C_UDP_EPEDS (0x1 << 15) // (UDP) Endpoint Enable Disable +#define AT91C_UDP_RXBYTECNT (0x7FF << 16) // (UDP) Number Of Bytes Available in the FIFO +// -------- UDP_TXVC : (UDP Offset: 0x74) Transceiver Control Register -------- +#define AT91C_UDP_TXVDIS (0x1 << 8) // (UDP) + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Timer Counter Channel Interface +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_TC { + AT91_REG TC_CCR; // Channel Control Register + AT91_REG TC_CMR; // Channel Mode Register (Capture Mode / Waveform Mode) + AT91_REG Reserved0[2]; // + AT91_REG TC_CV; // Counter Value + AT91_REG TC_RA; // Register A + AT91_REG TC_RB; // Register B + AT91_REG TC_RC; // Register C + AT91_REG TC_SR; // Status Register + AT91_REG TC_IER; // Interrupt Enable Register + AT91_REG TC_IDR; // Interrupt Disable Register + AT91_REG TC_IMR; // Interrupt Mask Register +} AT91S_TC, *AT91PS_TC; +#else +#define TC_CCR (AT91_CAST(AT91_REG *) 0x00000000) // (TC_CCR) Channel Control Register +#define TC_CMR (AT91_CAST(AT91_REG *) 0x00000004) // (TC_CMR) Channel Mode Register (Capture Mode / Waveform Mode) +#define TC_CV (AT91_CAST(AT91_REG *) 0x00000010) // (TC_CV) Counter Value +#define TC_RA (AT91_CAST(AT91_REG *) 0x00000014) // (TC_RA) Register A +#define TC_RB (AT91_CAST(AT91_REG *) 0x00000018) // (TC_RB) Register B +#define TC_RC (AT91_CAST(AT91_REG *) 0x0000001C) // (TC_RC) Register C +#define TC_SR (AT91_CAST(AT91_REG *) 0x00000020) // (TC_SR) Status Register +#define TC_IER (AT91_CAST(AT91_REG *) 0x00000024) // (TC_IER) Interrupt Enable Register +#define TC_IDR (AT91_CAST(AT91_REG *) 0x00000028) // (TC_IDR) Interrupt Disable Register +#define TC_IMR (AT91_CAST(AT91_REG *) 0x0000002C) // (TC_IMR) Interrupt Mask Register + +#endif +// -------- TC_CCR : (TC Offset: 0x0) TC Channel Control Register -------- +#define AT91C_TC_CLKEN (0x1 << 0) // (TC) Counter Clock Enable Command +#define AT91C_TC_CLKDIS (0x1 << 1) // (TC) Counter Clock Disable Command +#define AT91C_TC_SWTRG (0x1 << 2) // (TC) Software Trigger Command +// -------- TC_CMR : (TC Offset: 0x4) TC Channel Mode Register: Capture Mode / Waveform Mode -------- +#define AT91C_TC_CLKS (0x7 << 0) // (TC) Clock Selection +#define AT91C_TC_CLKS_TIMER_DIV1_CLOCK (0x0) // (TC) Clock selected: TIMER_DIV1_CLOCK +#define AT91C_TC_CLKS_TIMER_DIV2_CLOCK (0x1) // (TC) Clock selected: TIMER_DIV2_CLOCK +#define AT91C_TC_CLKS_TIMER_DIV3_CLOCK (0x2) // (TC) Clock selected: TIMER_DIV3_CLOCK +#define AT91C_TC_CLKS_TIMER_DIV4_CLOCK (0x3) // (TC) Clock selected: TIMER_DIV4_CLOCK +#define AT91C_TC_CLKS_TIMER_DIV5_CLOCK (0x4) // (TC) Clock selected: TIMER_DIV5_CLOCK +#define AT91C_TC_CLKS_XC0 (0x5) // (TC) Clock selected: XC0 +#define AT91C_TC_CLKS_XC1 (0x6) // (TC) Clock selected: XC1 +#define AT91C_TC_CLKS_XC2 (0x7) // (TC) Clock selected: XC2 +#define AT91C_TC_CLKI (0x1 << 3) // (TC) Clock Invert +#define AT91C_TC_BURST (0x3 << 4) // (TC) Burst Signal Selection +#define AT91C_TC_BURST_NONE (0x0 << 4) // (TC) The clock is not gated by an external signal +#define AT91C_TC_BURST_XC0 (0x1 << 4) // (TC) XC0 is ANDed with the selected clock +#define AT91C_TC_BURST_XC1 (0x2 << 4) // (TC) XC1 is ANDed with the selected clock +#define AT91C_TC_BURST_XC2 (0x3 << 4) // (TC) XC2 is ANDed with the selected clock +#define AT91C_TC_CPCSTOP (0x1 << 6) // (TC) Counter Clock Stopped with RC Compare +#define AT91C_TC_LDBSTOP (0x1 << 6) // (TC) Counter Clock Stopped with RB Loading +#define AT91C_TC_CPCDIS (0x1 << 7) // (TC) Counter Clock Disable with RC Compare +#define AT91C_TC_LDBDIS (0x1 << 7) // (TC) Counter Clock Disabled with RB Loading +#define AT91C_TC_ETRGEDG (0x3 << 8) // (TC) External Trigger Edge Selection +#define AT91C_TC_ETRGEDG_NONE (0x0 << 8) // (TC) Edge: None +#define AT91C_TC_ETRGEDG_RISING (0x1 << 8) // (TC) Edge: rising edge +#define AT91C_TC_ETRGEDG_FALLING (0x2 << 8) // (TC) Edge: falling edge +#define AT91C_TC_ETRGEDG_BOTH (0x3 << 8) // (TC) Edge: each edge +#define AT91C_TC_EEVTEDG (0x3 << 8) // (TC) External Event Edge Selection +#define AT91C_TC_EEVTEDG_NONE (0x0 << 8) // (TC) Edge: None +#define AT91C_TC_EEVTEDG_RISING (0x1 << 8) // (TC) Edge: rising edge +#define AT91C_TC_EEVTEDG_FALLING (0x2 << 8) // (TC) Edge: falling edge +#define AT91C_TC_EEVTEDG_BOTH (0x3 << 8) // (TC) Edge: each edge +#define AT91C_TC_EEVT (0x3 << 10) // (TC) External Event Selection +#define AT91C_TC_EEVT_TIOB (0x0 << 10) // (TC) Signal selected as external event: TIOB TIOB direction: input +#define AT91C_TC_EEVT_XC0 (0x1 << 10) // (TC) Signal selected as external event: XC0 TIOB direction: output +#define AT91C_TC_EEVT_XC1 (0x2 << 10) // (TC) Signal selected as external event: XC1 TIOB direction: output +#define AT91C_TC_EEVT_XC2 (0x3 << 10) // (TC) Signal selected as external event: XC2 TIOB direction: output +#define AT91C_TC_ABETRG (0x1 << 10) // (TC) TIOA or TIOB External Trigger Selection +#define AT91C_TC_ENETRG (0x1 << 12) // (TC) External Event Trigger enable +#define AT91C_TC_WAVESEL (0x3 << 13) // (TC) Waveform Selection +#define AT91C_TC_WAVESEL_UP (0x0 << 13) // (TC) UP mode without atomatic trigger on RC Compare +#define AT91C_TC_WAVESEL_UPDOWN (0x1 << 13) // (TC) UPDOWN mode without automatic trigger on RC Compare +#define AT91C_TC_WAVESEL_UP_AUTO (0x2 << 13) // (TC) UP mode with automatic trigger on RC Compare +#define AT91C_TC_WAVESEL_UPDOWN_AUTO (0x3 << 13) // (TC) UPDOWN mode with automatic trigger on RC Compare +#define AT91C_TC_CPCTRG (0x1 << 14) // (TC) RC Compare Trigger Enable +#define AT91C_TC_WAVE (0x1 << 15) // (TC) +#define AT91C_TC_ACPA (0x3 << 16) // (TC) RA Compare Effect on TIOA +#define AT91C_TC_ACPA_NONE (0x0 << 16) // (TC) Effect: none +#define AT91C_TC_ACPA_SET (0x1 << 16) // (TC) Effect: set +#define AT91C_TC_ACPA_CLEAR (0x2 << 16) // (TC) Effect: clear +#define AT91C_TC_ACPA_TOGGLE (0x3 << 16) // (TC) Effect: toggle +#define AT91C_TC_LDRA (0x3 << 16) // (TC) RA Loading Selection +#define AT91C_TC_LDRA_NONE (0x0 << 16) // (TC) Edge: None +#define AT91C_TC_LDRA_RISING (0x1 << 16) // (TC) Edge: rising edge of TIOA +#define AT91C_TC_LDRA_FALLING (0x2 << 16) // (TC) Edge: falling edge of TIOA +#define AT91C_TC_LDRA_BOTH (0x3 << 16) // (TC) Edge: each edge of TIOA +#define AT91C_TC_ACPC (0x3 << 18) // (TC) RC Compare Effect on TIOA +#define AT91C_TC_ACPC_NONE (0x0 << 18) // (TC) Effect: none +#define AT91C_TC_ACPC_SET (0x1 << 18) // (TC) Effect: set +#define AT91C_TC_ACPC_CLEAR (0x2 << 18) // (TC) Effect: clear +#define AT91C_TC_ACPC_TOGGLE (0x3 << 18) // (TC) Effect: toggle +#define AT91C_TC_LDRB (0x3 << 18) // (TC) RB Loading Selection +#define AT91C_TC_LDRB_NONE (0x0 << 18) // (TC) Edge: None +#define AT91C_TC_LDRB_RISING (0x1 << 18) // (TC) Edge: rising edge of TIOA +#define AT91C_TC_LDRB_FALLING (0x2 << 18) // (TC) Edge: falling edge of TIOA +#define AT91C_TC_LDRB_BOTH (0x3 << 18) // (TC) Edge: each edge of TIOA +#define AT91C_TC_AEEVT (0x3 << 20) // (TC) External Event Effect on TIOA +#define AT91C_TC_AEEVT_NONE (0x0 << 20) // (TC) Effect: none +#define AT91C_TC_AEEVT_SET (0x1 << 20) // (TC) Effect: set +#define AT91C_TC_AEEVT_CLEAR (0x2 << 20) // (TC) Effect: clear +#define AT91C_TC_AEEVT_TOGGLE (0x3 << 20) // (TC) Effect: toggle +#define AT91C_TC_ASWTRG (0x3 << 22) // (TC) Software Trigger Effect on TIOA +#define AT91C_TC_ASWTRG_NONE (0x0 << 22) // (TC) Effect: none +#define AT91C_TC_ASWTRG_SET (0x1 << 22) // (TC) Effect: set +#define AT91C_TC_ASWTRG_CLEAR (0x2 << 22) // (TC) Effect: clear +#define AT91C_TC_ASWTRG_TOGGLE (0x3 << 22) // (TC) Effect: toggle +#define AT91C_TC_BCPB (0x3 << 24) // (TC) RB Compare Effect on TIOB +#define AT91C_TC_BCPB_NONE (0x0 << 24) // (TC) Effect: none +#define AT91C_TC_BCPB_SET (0x1 << 24) // (TC) Effect: set +#define AT91C_TC_BCPB_CLEAR (0x2 << 24) // (TC) Effect: clear +#define AT91C_TC_BCPB_TOGGLE (0x3 << 24) // (TC) Effect: toggle +#define AT91C_TC_BCPC (0x3 << 26) // (TC) RC Compare Effect on TIOB +#define AT91C_TC_BCPC_NONE (0x0 << 26) // (TC) Effect: none +#define AT91C_TC_BCPC_SET (0x1 << 26) // (TC) Effect: set +#define AT91C_TC_BCPC_CLEAR (0x2 << 26) // (TC) Effect: clear +#define AT91C_TC_BCPC_TOGGLE (0x3 << 26) // (TC) Effect: toggle +#define AT91C_TC_BEEVT (0x3 << 28) // (TC) External Event Effect on TIOB +#define AT91C_TC_BEEVT_NONE (0x0 << 28) // (TC) Effect: none +#define AT91C_TC_BEEVT_SET (0x1 << 28) // (TC) Effect: set +#define AT91C_TC_BEEVT_CLEAR (0x2 << 28) // (TC) Effect: clear +#define AT91C_TC_BEEVT_TOGGLE (0x3 << 28) // (TC) Effect: toggle +#define AT91C_TC_BSWTRG (0x3 << 30) // (TC) Software Trigger Effect on TIOB +#define AT91C_TC_BSWTRG_NONE (0x0 << 30) // (TC) Effect: none +#define AT91C_TC_BSWTRG_SET (0x1 << 30) // (TC) Effect: set +#define AT91C_TC_BSWTRG_CLEAR (0x2 << 30) // (TC) Effect: clear +#define AT91C_TC_BSWTRG_TOGGLE (0x3 << 30) // (TC) Effect: toggle +// -------- TC_SR : (TC Offset: 0x20) TC Channel Status Register -------- +#define AT91C_TC_COVFS (0x1 << 0) // (TC) Counter Overflow +#define AT91C_TC_LOVRS (0x1 << 1) // (TC) Load Overrun +#define AT91C_TC_CPAS (0x1 << 2) // (TC) RA Compare +#define AT91C_TC_CPBS (0x1 << 3) // (TC) RB Compare +#define AT91C_TC_CPCS (0x1 << 4) // (TC) RC Compare +#define AT91C_TC_LDRAS (0x1 << 5) // (TC) RA Loading +#define AT91C_TC_LDRBS (0x1 << 6) // (TC) RB Loading +#define AT91C_TC_ETRGS (0x1 << 7) // (TC) External Trigger +#define AT91C_TC_CLKSTA (0x1 << 16) // (TC) Clock Enabling +#define AT91C_TC_MTIOA (0x1 << 17) // (TC) TIOA Mirror +#define AT91C_TC_MTIOB (0x1 << 18) // (TC) TIOA Mirror +// -------- TC_IER : (TC Offset: 0x24) TC Channel Interrupt Enable Register -------- +// -------- TC_IDR : (TC Offset: 0x28) TC Channel Interrupt Disable Register -------- +// -------- TC_IMR : (TC Offset: 0x2c) TC Channel Interrupt Mask Register -------- + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Timer Counter Interface +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_TCB { + AT91S_TC TCB_TC0; // TC Channel 0 + AT91_REG Reserved0[4]; // + AT91S_TC TCB_TC1; // TC Channel 1 + AT91_REG Reserved1[4]; // + AT91S_TC TCB_TC2; // TC Channel 2 + AT91_REG Reserved2[4]; // + AT91_REG TCB_BCR; // TC Block Control Register + AT91_REG TCB_BMR; // TC Block Mode Register +} AT91S_TCB, *AT91PS_TCB; +#else +#define TCB_BCR (AT91_CAST(AT91_REG *) 0x000000C0) // (TCB_BCR) TC Block Control Register +#define TCB_BMR (AT91_CAST(AT91_REG *) 0x000000C4) // (TCB_BMR) TC Block Mode Register + +#endif +// -------- TCB_BCR : (TCB Offset: 0xc0) TC Block Control Register -------- +#define AT91C_TCB_SYNC (0x1 << 0) // (TCB) Synchro Command +// -------- TCB_BMR : (TCB Offset: 0xc4) TC Block Mode Register -------- +#define AT91C_TCB_TC0XC0S (0x3 << 0) // (TCB) External Clock Signal 0 Selection +#define AT91C_TCB_TC0XC0S_TCLK0 (0x0) // (TCB) TCLK0 connected to XC0 +#define AT91C_TCB_TC0XC0S_NONE (0x1) // (TCB) None signal connected to XC0 +#define AT91C_TCB_TC0XC0S_TIOA1 (0x2) // (TCB) TIOA1 connected to XC0 +#define AT91C_TCB_TC0XC0S_TIOA2 (0x3) // (TCB) TIOA2 connected to XC0 +#define AT91C_TCB_TC1XC1S (0x3 << 2) // (TCB) External Clock Signal 1 Selection +#define AT91C_TCB_TC1XC1S_TCLK1 (0x0 << 2) // (TCB) TCLK1 connected to XC1 +#define AT91C_TCB_TC1XC1S_NONE (0x1 << 2) // (TCB) None signal connected to XC1 +#define AT91C_TCB_TC1XC1S_TIOA0 (0x2 << 2) // (TCB) TIOA0 connected to XC1 +#define AT91C_TCB_TC1XC1S_TIOA2 (0x3 << 2) // (TCB) TIOA2 connected to XC1 +#define AT91C_TCB_TC2XC2S (0x3 << 4) // (TCB) External Clock Signal 2 Selection +#define AT91C_TCB_TC2XC2S_TCLK2 (0x0 << 4) // (TCB) TCLK2 connected to XC2 +#define AT91C_TCB_TC2XC2S_NONE (0x1 << 4) // (TCB) None signal connected to XC2 +#define AT91C_TCB_TC2XC2S_TIOA0 (0x2 << 4) // (TCB) TIOA0 connected to XC2 +#define AT91C_TCB_TC2XC2S_TIOA1 (0x3 << 4) // (TCB) TIOA2 connected to XC2 + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Control Area Network MailBox Interface +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_CAN_MB { + AT91_REG CAN_MB_MMR; // MailBox Mode Register + AT91_REG CAN_MB_MAM; // MailBox Acceptance Mask Register + AT91_REG CAN_MB_MID; // MailBox ID Register + AT91_REG CAN_MB_MFID; // MailBox Family ID Register + AT91_REG CAN_MB_MSR; // MailBox Status Register + AT91_REG CAN_MB_MDL; // MailBox Data Low Register + AT91_REG CAN_MB_MDH; // MailBox Data High Register + AT91_REG CAN_MB_MCR; // MailBox Control Register +} AT91S_CAN_MB, *AT91PS_CAN_MB; +#else +#define CAN_MMR (AT91_CAST(AT91_REG *) 0x00000000) // (CAN_MMR) MailBox Mode Register +#define CAN_MAM (AT91_CAST(AT91_REG *) 0x00000004) // (CAN_MAM) MailBox Acceptance Mask Register +#define CAN_MID (AT91_CAST(AT91_REG *) 0x00000008) // (CAN_MID) MailBox ID Register +#define CAN_MFID (AT91_CAST(AT91_REG *) 0x0000000C) // (CAN_MFID) MailBox Family ID Register +#define CAN_MSR (AT91_CAST(AT91_REG *) 0x00000010) // (CAN_MSR) MailBox Status Register +#define CAN_MDL (AT91_CAST(AT91_REG *) 0x00000014) // (CAN_MDL) MailBox Data Low Register +#define CAN_MDH (AT91_CAST(AT91_REG *) 0x00000018) // (CAN_MDH) MailBox Data High Register +#define CAN_MCR (AT91_CAST(AT91_REG *) 0x0000001C) // (CAN_MCR) MailBox Control Register + +#endif +// -------- CAN_MMR : (CAN_MB Offset: 0x0) CAN Message Mode Register -------- +#define AT91C_CAN_MTIMEMARK (0xFFFF << 0) // (CAN_MB) Mailbox Timemark +#define AT91C_CAN_PRIOR (0xF << 16) // (CAN_MB) Mailbox Priority +#define AT91C_CAN_MOT (0x7 << 24) // (CAN_MB) Mailbox Object Type +#define AT91C_CAN_MOT_DIS (0x0 << 24) // (CAN_MB) +#define AT91C_CAN_MOT_RX (0x1 << 24) // (CAN_MB) +#define AT91C_CAN_MOT_RXOVERWRITE (0x2 << 24) // (CAN_MB) +#define AT91C_CAN_MOT_TX (0x3 << 24) // (CAN_MB) +#define AT91C_CAN_MOT_CONSUMER (0x4 << 24) // (CAN_MB) +#define AT91C_CAN_MOT_PRODUCER (0x5 << 24) // (CAN_MB) +// -------- CAN_MAM : (CAN_MB Offset: 0x4) CAN Message Acceptance Mask Register -------- +#define AT91C_CAN_MIDvB (0x3FFFF << 0) // (CAN_MB) Complementary bits for identifier in extended mode +#define AT91C_CAN_MIDvA (0x7FF << 18) // (CAN_MB) Identifier for standard frame mode +#define AT91C_CAN_MIDE (0x1 << 29) // (CAN_MB) Identifier Version +// -------- CAN_MID : (CAN_MB Offset: 0x8) CAN Message ID Register -------- +// -------- CAN_MFID : (CAN_MB Offset: 0xc) CAN Message Family ID Register -------- +// -------- CAN_MSR : (CAN_MB Offset: 0x10) CAN Message Status Register -------- +#define AT91C_CAN_MTIMESTAMP (0xFFFF << 0) // (CAN_MB) Timer Value +#define AT91C_CAN_MDLC (0xF << 16) // (CAN_MB) Mailbox Data Length Code +#define AT91C_CAN_MRTR (0x1 << 20) // (CAN_MB) Mailbox Remote Transmission Request +#define AT91C_CAN_MABT (0x1 << 22) // (CAN_MB) Mailbox Message Abort +#define AT91C_CAN_MRDY (0x1 << 23) // (CAN_MB) Mailbox Ready +#define AT91C_CAN_MMI (0x1 << 24) // (CAN_MB) Mailbox Message Ignored +// -------- CAN_MDL : (CAN_MB Offset: 0x14) CAN Message Data Low Register -------- +// -------- CAN_MDH : (CAN_MB Offset: 0x18) CAN Message Data High Register -------- +// -------- CAN_MCR : (CAN_MB Offset: 0x1c) CAN Message Control Register -------- +#define AT91C_CAN_MACR (0x1 << 22) // (CAN_MB) Abort Request for Mailbox +#define AT91C_CAN_MTCR (0x1 << 23) // (CAN_MB) Mailbox Transfer Command + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Control Area Network Interface +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_CAN { + AT91_REG CAN_MR; // Mode Register + AT91_REG CAN_IER; // Interrupt Enable Register + AT91_REG CAN_IDR; // Interrupt Disable Register + AT91_REG CAN_IMR; // Interrupt Mask Register + AT91_REG CAN_SR; // Status Register + AT91_REG CAN_BR; // Baudrate Register + AT91_REG CAN_TIM; // Timer Register + AT91_REG CAN_TIMESTP; // Time Stamp Register + AT91_REG CAN_ECR; // Error Counter Register + AT91_REG CAN_TCR; // Transfer Command Register + AT91_REG CAN_ACR; // Abort Command Register + AT91_REG Reserved0[52]; // + AT91_REG CAN_VR; // Version Register + AT91_REG Reserved1[64]; // + AT91S_CAN_MB CAN_MB0; // CAN Mailbox 0 + AT91S_CAN_MB CAN_MB1; // CAN Mailbox 1 + AT91S_CAN_MB CAN_MB2; // CAN Mailbox 2 + AT91S_CAN_MB CAN_MB3; // CAN Mailbox 3 + AT91S_CAN_MB CAN_MB4; // CAN Mailbox 4 + AT91S_CAN_MB CAN_MB5; // CAN Mailbox 5 + AT91S_CAN_MB CAN_MB6; // CAN Mailbox 6 + AT91S_CAN_MB CAN_MB7; // CAN Mailbox 7 + AT91S_CAN_MB CAN_MB8; // CAN Mailbox 8 + AT91S_CAN_MB CAN_MB9; // CAN Mailbox 9 + AT91S_CAN_MB CAN_MB10; // CAN Mailbox 10 + AT91S_CAN_MB CAN_MB11; // CAN Mailbox 11 + AT91S_CAN_MB CAN_MB12; // CAN Mailbox 12 + AT91S_CAN_MB CAN_MB13; // CAN Mailbox 13 + AT91S_CAN_MB CAN_MB14; // CAN Mailbox 14 + AT91S_CAN_MB CAN_MB15; // CAN Mailbox 15 +} AT91S_CAN, *AT91PS_CAN; +#else +#define CAN_MR (AT91_CAST(AT91_REG *) 0x00000000) // (CAN_MR) Mode Register +#define CAN_IER (AT91_CAST(AT91_REG *) 0x00000004) // (CAN_IER) Interrupt Enable Register +#define CAN_IDR (AT91_CAST(AT91_REG *) 0x00000008) // (CAN_IDR) Interrupt Disable Register +#define CAN_IMR (AT91_CAST(AT91_REG *) 0x0000000C) // (CAN_IMR) Interrupt Mask Register +#define CAN_SR (AT91_CAST(AT91_REG *) 0x00000010) // (CAN_SR) Status Register +#define CAN_BR (AT91_CAST(AT91_REG *) 0x00000014) // (CAN_BR) Baudrate Register +#define CAN_TIM (AT91_CAST(AT91_REG *) 0x00000018) // (CAN_TIM) Timer Register +#define CAN_TIMESTP (AT91_CAST(AT91_REG *) 0x0000001C) // (CAN_TIMESTP) Time Stamp Register +#define CAN_ECR (AT91_CAST(AT91_REG *) 0x00000020) // (CAN_ECR) Error Counter Register +#define CAN_TCR (AT91_CAST(AT91_REG *) 0x00000024) // (CAN_TCR) Transfer Command Register +#define CAN_ACR (AT91_CAST(AT91_REG *) 0x00000028) // (CAN_ACR) Abort Command Register +#define CAN_VR (AT91_CAST(AT91_REG *) 0x000000FC) // (CAN_VR) Version Register + +#endif +// -------- CAN_MR : (CAN Offset: 0x0) CAN Mode Register -------- +#define AT91C_CAN_CANEN (0x1 << 0) // (CAN) CAN Controller Enable +#define AT91C_CAN_LPM (0x1 << 1) // (CAN) Disable/Enable Low Power Mode +#define AT91C_CAN_ABM (0x1 << 2) // (CAN) Disable/Enable Autobaud/Listen Mode +#define AT91C_CAN_OVL (0x1 << 3) // (CAN) Disable/Enable Overload Frame +#define AT91C_CAN_TEOF (0x1 << 4) // (CAN) Time Stamp messages at each end of Frame +#define AT91C_CAN_TTM (0x1 << 5) // (CAN) Disable/Enable Time Trigger Mode +#define AT91C_CAN_TIMFRZ (0x1 << 6) // (CAN) Enable Timer Freeze +#define AT91C_CAN_DRPT (0x1 << 7) // (CAN) Disable Repeat +// -------- CAN_IER : (CAN Offset: 0x4) CAN Interrupt Enable Register -------- +#define AT91C_CAN_MB0 (0x1 << 0) // (CAN) Mailbox 0 Flag +#define AT91C_CAN_MB1 (0x1 << 1) // (CAN) Mailbox 1 Flag +#define AT91C_CAN_MB2 (0x1 << 2) // (CAN) Mailbox 2 Flag +#define AT91C_CAN_MB3 (0x1 << 3) // (CAN) Mailbox 3 Flag +#define AT91C_CAN_MB4 (0x1 << 4) // (CAN) Mailbox 4 Flag +#define AT91C_CAN_MB5 (0x1 << 5) // (CAN) Mailbox 5 Flag +#define AT91C_CAN_MB6 (0x1 << 6) // (CAN) Mailbox 6 Flag +#define AT91C_CAN_MB7 (0x1 << 7) // (CAN) Mailbox 7 Flag +#define AT91C_CAN_MB8 (0x1 << 8) // (CAN) Mailbox 8 Flag +#define AT91C_CAN_MB9 (0x1 << 9) // (CAN) Mailbox 9 Flag +#define AT91C_CAN_MB10 (0x1 << 10) // (CAN) Mailbox 10 Flag +#define AT91C_CAN_MB11 (0x1 << 11) // (CAN) Mailbox 11 Flag +#define AT91C_CAN_MB12 (0x1 << 12) // (CAN) Mailbox 12 Flag +#define AT91C_CAN_MB13 (0x1 << 13) // (CAN) Mailbox 13 Flag +#define AT91C_CAN_MB14 (0x1 << 14) // (CAN) Mailbox 14 Flag +#define AT91C_CAN_MB15 (0x1 << 15) // (CAN) Mailbox 15 Flag +#define AT91C_CAN_ERRA (0x1 << 16) // (CAN) Error Active Mode Flag +#define AT91C_CAN_WARN (0x1 << 17) // (CAN) Warning Limit Flag +#define AT91C_CAN_ERRP (0x1 << 18) // (CAN) Error Passive Mode Flag +#define AT91C_CAN_BOFF (0x1 << 19) // (CAN) Bus Off Mode Flag +#define AT91C_CAN_SLEEP (0x1 << 20) // (CAN) Sleep Flag +#define AT91C_CAN_WAKEUP (0x1 << 21) // (CAN) Wakeup Flag +#define AT91C_CAN_TOVF (0x1 << 22) // (CAN) Timer Overflow Flag +#define AT91C_CAN_TSTP (0x1 << 23) // (CAN) Timestamp Flag +#define AT91C_CAN_CERR (0x1 << 24) // (CAN) CRC Error +#define AT91C_CAN_SERR (0x1 << 25) // (CAN) Stuffing Error +#define AT91C_CAN_AERR (0x1 << 26) // (CAN) Acknowledgment Error +#define AT91C_CAN_FERR (0x1 << 27) // (CAN) Form Error +#define AT91C_CAN_BERR (0x1 << 28) // (CAN) Bit Error +// -------- CAN_IDR : (CAN Offset: 0x8) CAN Interrupt Disable Register -------- +// -------- CAN_IMR : (CAN Offset: 0xc) CAN Interrupt Mask Register -------- +// -------- CAN_SR : (CAN Offset: 0x10) CAN Status Register -------- +#define AT91C_CAN_RBSY (0x1 << 29) // (CAN) Receiver Busy +#define AT91C_CAN_TBSY (0x1 << 30) // (CAN) Transmitter Busy +#define AT91C_CAN_OVLY (0x1 << 31) // (CAN) Overload Busy +// -------- CAN_BR : (CAN Offset: 0x14) CAN Baudrate Register -------- +#define AT91C_CAN_PHASE2 (0x7 << 0) // (CAN) Phase 2 segment +#define AT91C_CAN_PHASE1 (0x7 << 4) // (CAN) Phase 1 segment +#define AT91C_CAN_PROPAG (0x7 << 8) // (CAN) Programmation time segment +#define AT91C_CAN_SYNC (0x3 << 12) // (CAN) Re-synchronization jump width segment +#define AT91C_CAN_BRP (0x7F << 16) // (CAN) Baudrate Prescaler +#define AT91C_CAN_SMP (0x1 << 24) // (CAN) Sampling mode +// -------- CAN_TIM : (CAN Offset: 0x18) CAN Timer Register -------- +#define AT91C_CAN_TIMER (0xFFFF << 0) // (CAN) Timer field +// -------- CAN_TIMESTP : (CAN Offset: 0x1c) CAN Timestamp Register -------- +// -------- CAN_ECR : (CAN Offset: 0x20) CAN Error Counter Register -------- +#define AT91C_CAN_REC (0xFF << 0) // (CAN) Receive Error Counter +#define AT91C_CAN_TEC (0xFF << 16) // (CAN) Transmit Error Counter +// -------- CAN_TCR : (CAN Offset: 0x24) CAN Transfer Command Register -------- +#define AT91C_CAN_TIMRST (0x1 << 31) // (CAN) Timer Reset Field +// -------- CAN_ACR : (CAN Offset: 0x28) CAN Abort Command Register -------- + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Ethernet MAC 10/100 +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_EMAC { + AT91_REG EMAC_NCR; // Network Control Register + AT91_REG EMAC_NCFGR; // Network Configuration Register + AT91_REG EMAC_NSR; // Network Status Register + AT91_REG Reserved0[2]; // + AT91_REG EMAC_TSR; // Transmit Status Register + AT91_REG EMAC_RBQP; // Receive Buffer Queue Pointer + AT91_REG EMAC_TBQP; // Transmit Buffer Queue Pointer + AT91_REG EMAC_RSR; // Receive Status Register + AT91_REG EMAC_ISR; // Interrupt Status Register + AT91_REG EMAC_IER; // Interrupt Enable Register + AT91_REG EMAC_IDR; // Interrupt Disable Register + AT91_REG EMAC_IMR; // Interrupt Mask Register + AT91_REG EMAC_MAN; // PHY Maintenance Register + AT91_REG EMAC_PTR; // Pause Time Register + AT91_REG EMAC_PFR; // Pause Frames received Register + AT91_REG EMAC_FTO; // Frames Transmitted OK Register + AT91_REG EMAC_SCF; // Single Collision Frame Register + AT91_REG EMAC_MCF; // Multiple Collision Frame Register + AT91_REG EMAC_FRO; // Frames Received OK Register + AT91_REG EMAC_FCSE; // Frame Check Sequence Error Register + AT91_REG EMAC_ALE; // Alignment Error Register + AT91_REG EMAC_DTF; // Deferred Transmission Frame Register + AT91_REG EMAC_LCOL; // Late Collision Register + AT91_REG EMAC_ECOL; // Excessive Collision Register + AT91_REG EMAC_TUND; // Transmit Underrun Error Register + AT91_REG EMAC_CSE; // Carrier Sense Error Register + AT91_REG EMAC_RRE; // Receive Ressource Error Register + AT91_REG EMAC_ROV; // Receive Overrun Errors Register + AT91_REG EMAC_RSE; // Receive Symbol Errors Register + AT91_REG EMAC_ELE; // Excessive Length Errors Register + AT91_REG EMAC_RJA; // Receive Jabbers Register + AT91_REG EMAC_USF; // Undersize Frames Register + AT91_REG EMAC_STE; // SQE Test Error Register + AT91_REG EMAC_RLE; // Receive Length Field Mismatch Register + AT91_REG EMAC_TPF; // Transmitted Pause Frames Register + AT91_REG EMAC_HRB; // Hash Address Bottom[31:0] + AT91_REG EMAC_HRT; // Hash Address Top[63:32] + AT91_REG EMAC_SA1L; // Specific Address 1 Bottom, First 4 bytes + AT91_REG EMAC_SA1H; // Specific Address 1 Top, Last 2 bytes + AT91_REG EMAC_SA2L; // Specific Address 2 Bottom, First 4 bytes + AT91_REG EMAC_SA2H; // Specific Address 2 Top, Last 2 bytes + AT91_REG EMAC_SA3L; // Specific Address 3 Bottom, First 4 bytes + AT91_REG EMAC_SA3H; // Specific Address 3 Top, Last 2 bytes + AT91_REG EMAC_SA4L; // Specific Address 4 Bottom, First 4 bytes + AT91_REG EMAC_SA4H; // Specific Address 4 Top, Last 2 bytes + AT91_REG EMAC_TID; // Type ID Checking Register + AT91_REG EMAC_TPQ; // Transmit Pause Quantum Register + AT91_REG EMAC_USRIO; // USER Input/Output Register + AT91_REG EMAC_WOL; // Wake On LAN Register + AT91_REG Reserved1[13]; // + AT91_REG EMAC_REV; // Revision Register +} AT91S_EMAC, *AT91PS_EMAC; +#else +#define EMAC_NCR (AT91_CAST(AT91_REG *) 0x00000000) // (EMAC_NCR) Network Control Register +#define EMAC_NCFGR (AT91_CAST(AT91_REG *) 0x00000004) // (EMAC_NCFGR) Network Configuration Register +#define EMAC_NSR (AT91_CAST(AT91_REG *) 0x00000008) // (EMAC_NSR) Network Status Register +#define EMAC_TSR (AT91_CAST(AT91_REG *) 0x00000014) // (EMAC_TSR) Transmit Status Register +#define EMAC_RBQP (AT91_CAST(AT91_REG *) 0x00000018) // (EMAC_RBQP) Receive Buffer Queue Pointer +#define EMAC_TBQP (AT91_CAST(AT91_REG *) 0x0000001C) // (EMAC_TBQP) Transmit Buffer Queue Pointer +#define EMAC_RSR (AT91_CAST(AT91_REG *) 0x00000020) // (EMAC_RSR) Receive Status Register +#define EMAC_ISR (AT91_CAST(AT91_REG *) 0x00000024) // (EMAC_ISR) Interrupt Status Register +#define EMAC_IER (AT91_CAST(AT91_REG *) 0x00000028) // (EMAC_IER) Interrupt Enable Register +#define EMAC_IDR (AT91_CAST(AT91_REG *) 0x0000002C) // (EMAC_IDR) Interrupt Disable Register +#define EMAC_IMR (AT91_CAST(AT91_REG *) 0x00000030) // (EMAC_IMR) Interrupt Mask Register +#define EMAC_MAN (AT91_CAST(AT91_REG *) 0x00000034) // (EMAC_MAN) PHY Maintenance Register +#define EMAC_PTR (AT91_CAST(AT91_REG *) 0x00000038) // (EMAC_PTR) Pause Time Register +#define EMAC_PFR (AT91_CAST(AT91_REG *) 0x0000003C) // (EMAC_PFR) Pause Frames received Register +#define EMAC_FTO (AT91_CAST(AT91_REG *) 0x00000040) // (EMAC_FTO) Frames Transmitted OK Register +#define EMAC_SCF (AT91_CAST(AT91_REG *) 0x00000044) // (EMAC_SCF) Single Collision Frame Register +#define EMAC_MCF (AT91_CAST(AT91_REG *) 0x00000048) // (EMAC_MCF) Multiple Collision Frame Register +#define EMAC_FRO (AT91_CAST(AT91_REG *) 0x0000004C) // (EMAC_FRO) Frames Received OK Register +#define EMAC_FCSE (AT91_CAST(AT91_REG *) 0x00000050) // (EMAC_FCSE) Frame Check Sequence Error Register +#define EMAC_ALE (AT91_CAST(AT91_REG *) 0x00000054) // (EMAC_ALE) Alignment Error Register +#define EMAC_DTF (AT91_CAST(AT91_REG *) 0x00000058) // (EMAC_DTF) Deferred Transmission Frame Register +#define EMAC_LCOL (AT91_CAST(AT91_REG *) 0x0000005C) // (EMAC_LCOL) Late Collision Register +#define EMAC_ECOL (AT91_CAST(AT91_REG *) 0x00000060) // (EMAC_ECOL) Excessive Collision Register +#define EMAC_TUND (AT91_CAST(AT91_REG *) 0x00000064) // (EMAC_TUND) Transmit Underrun Error Register +#define EMAC_CSE (AT91_CAST(AT91_REG *) 0x00000068) // (EMAC_CSE) Carrier Sense Error Register +#define EMAC_RRE (AT91_CAST(AT91_REG *) 0x0000006C) // (EMAC_RRE) Receive Ressource Error Register +#define EMAC_ROV (AT91_CAST(AT91_REG *) 0x00000070) // (EMAC_ROV) Receive Overrun Errors Register +#define EMAC_RSE (AT91_CAST(AT91_REG *) 0x00000074) // (EMAC_RSE) Receive Symbol Errors Register +#define EMAC_ELE (AT91_CAST(AT91_REG *) 0x00000078) // (EMAC_ELE) Excessive Length Errors Register +#define EMAC_RJA (AT91_CAST(AT91_REG *) 0x0000007C) // (EMAC_RJA) Receive Jabbers Register +#define EMAC_USF (AT91_CAST(AT91_REG *) 0x00000080) // (EMAC_USF) Undersize Frames Register +#define EMAC_STE (AT91_CAST(AT91_REG *) 0x00000084) // (EMAC_STE) SQE Test Error Register +#define EMAC_RLE (AT91_CAST(AT91_REG *) 0x00000088) // (EMAC_RLE) Receive Length Field Mismatch Register +#define EMAC_TPF (AT91_CAST(AT91_REG *) 0x0000008C) // (EMAC_TPF) Transmitted Pause Frames Register +#define EMAC_HRB (AT91_CAST(AT91_REG *) 0x00000090) // (EMAC_HRB) Hash Address Bottom[31:0] +#define EMAC_HRT (AT91_CAST(AT91_REG *) 0x00000094) // (EMAC_HRT) Hash Address Top[63:32] +#define EMAC_SA1L (AT91_CAST(AT91_REG *) 0x00000098) // (EMAC_SA1L) Specific Address 1 Bottom, First 4 bytes +#define EMAC_SA1H (AT91_CAST(AT91_REG *) 0x0000009C) // (EMAC_SA1H) Specific Address 1 Top, Last 2 bytes +#define EMAC_SA2L (AT91_CAST(AT91_REG *) 0x000000A0) // (EMAC_SA2L) Specific Address 2 Bottom, First 4 bytes +#define EMAC_SA2H (AT91_CAST(AT91_REG *) 0x000000A4) // (EMAC_SA2H) Specific Address 2 Top, Last 2 bytes +#define EMAC_SA3L (AT91_CAST(AT91_REG *) 0x000000A8) // (EMAC_SA3L) Specific Address 3 Bottom, First 4 bytes +#define EMAC_SA3H (AT91_CAST(AT91_REG *) 0x000000AC) // (EMAC_SA3H) Specific Address 3 Top, Last 2 bytes +#define EMAC_SA4L (AT91_CAST(AT91_REG *) 0x000000B0) // (EMAC_SA4L) Specific Address 4 Bottom, First 4 bytes +#define EMAC_SA4H (AT91_CAST(AT91_REG *) 0x000000B4) // (EMAC_SA4H) Specific Address 4 Top, Last 2 bytes +#define EMAC_TID (AT91_CAST(AT91_REG *) 0x000000B8) // (EMAC_TID) Type ID Checking Register +#define EMAC_TPQ (AT91_CAST(AT91_REG *) 0x000000BC) // (EMAC_TPQ) Transmit Pause Quantum Register +#define EMAC_USRIO (AT91_CAST(AT91_REG *) 0x000000C0) // (EMAC_USRIO) USER Input/Output Register +#define EMAC_WOL (AT91_CAST(AT91_REG *) 0x000000C4) // (EMAC_WOL) Wake On LAN Register +#define EMAC_REV (AT91_CAST(AT91_REG *) 0x000000FC) // (EMAC_REV) Revision Register + +#endif +// -------- EMAC_NCR : (EMAC Offset: 0x0) -------- +#define AT91C_EMAC_LB (0x1 << 0) // (EMAC) Loopback. Optional. When set, loopback signal is at high level. +#define AT91C_EMAC_LLB (0x1 << 1) // (EMAC) Loopback local. +#define AT91C_EMAC_RE (0x1 << 2) // (EMAC) Receive enable. +#define AT91C_EMAC_TE (0x1 << 3) // (EMAC) Transmit enable. +#define AT91C_EMAC_MPE (0x1 << 4) // (EMAC) Management port enable. +#define AT91C_EMAC_CLRSTAT (0x1 << 5) // (EMAC) Clear statistics registers. +#define AT91C_EMAC_INCSTAT (0x1 << 6) // (EMAC) Increment statistics registers. +#define AT91C_EMAC_WESTAT (0x1 << 7) // (EMAC) Write enable for statistics registers. +#define AT91C_EMAC_BP (0x1 << 8) // (EMAC) Back pressure. +#define AT91C_EMAC_TSTART (0x1 << 9) // (EMAC) Start Transmission. +#define AT91C_EMAC_THALT (0x1 << 10) // (EMAC) Transmission Halt. +#define AT91C_EMAC_TPFR (0x1 << 11) // (EMAC) Transmit pause frame +#define AT91C_EMAC_TZQ (0x1 << 12) // (EMAC) Transmit zero quantum pause frame +// -------- EMAC_NCFGR : (EMAC Offset: 0x4) Network Configuration Register -------- +#define AT91C_EMAC_SPD (0x1 << 0) // (EMAC) Speed. +#define AT91C_EMAC_FD (0x1 << 1) // (EMAC) Full duplex. +#define AT91C_EMAC_JFRAME (0x1 << 3) // (EMAC) Jumbo Frames. +#define AT91C_EMAC_CAF (0x1 << 4) // (EMAC) Copy all frames. +#define AT91C_EMAC_NBC (0x1 << 5) // (EMAC) No broadcast. +#define AT91C_EMAC_MTI (0x1 << 6) // (EMAC) Multicast hash event enable +#define AT91C_EMAC_UNI (0x1 << 7) // (EMAC) Unicast hash enable. +#define AT91C_EMAC_BIG (0x1 << 8) // (EMAC) Receive 1522 bytes. +#define AT91C_EMAC_EAE (0x1 << 9) // (EMAC) External address match enable. +#define AT91C_EMAC_CLK (0x3 << 10) // (EMAC) +#define AT91C_EMAC_CLK_HCLK_8 (0x0 << 10) // (EMAC) HCLK divided by 8 +#define AT91C_EMAC_CLK_HCLK_16 (0x1 << 10) // (EMAC) HCLK divided by 16 +#define AT91C_EMAC_CLK_HCLK_32 (0x2 << 10) // (EMAC) HCLK divided by 32 +#define AT91C_EMAC_CLK_HCLK_64 (0x3 << 10) // (EMAC) HCLK divided by 64 +#define AT91C_EMAC_RTY (0x1 << 12) // (EMAC) +#define AT91C_EMAC_PAE (0x1 << 13) // (EMAC) +#define AT91C_EMAC_RBOF (0x3 << 14) // (EMAC) +#define AT91C_EMAC_RBOF_OFFSET_0 (0x0 << 14) // (EMAC) no offset from start of receive buffer +#define AT91C_EMAC_RBOF_OFFSET_1 (0x1 << 14) // (EMAC) one byte offset from start of receive buffer +#define AT91C_EMAC_RBOF_OFFSET_2 (0x2 << 14) // (EMAC) two bytes offset from start of receive buffer +#define AT91C_EMAC_RBOF_OFFSET_3 (0x3 << 14) // (EMAC) three bytes offset from start of receive buffer +#define AT91C_EMAC_RLCE (0x1 << 16) // (EMAC) Receive Length field Checking Enable +#define AT91C_EMAC_DRFCS (0x1 << 17) // (EMAC) Discard Receive FCS +#define AT91C_EMAC_EFRHD (0x1 << 18) // (EMAC) +#define AT91C_EMAC_IRXFCS (0x1 << 19) // (EMAC) Ignore RX FCS +// -------- EMAC_NSR : (EMAC Offset: 0x8) Network Status Register -------- +#define AT91C_EMAC_LINKR (0x1 << 0) // (EMAC) +#define AT91C_EMAC_MDIO (0x1 << 1) // (EMAC) +#define AT91C_EMAC_IDLE (0x1 << 2) // (EMAC) +// -------- EMAC_TSR : (EMAC Offset: 0x14) Transmit Status Register -------- +#define AT91C_EMAC_UBR (0x1 << 0) // (EMAC) +#define AT91C_EMAC_COL (0x1 << 1) // (EMAC) +#define AT91C_EMAC_RLES (0x1 << 2) // (EMAC) +#define AT91C_EMAC_TGO (0x1 << 3) // (EMAC) Transmit Go +#define AT91C_EMAC_BEX (0x1 << 4) // (EMAC) Buffers exhausted mid frame +#define AT91C_EMAC_COMP (0x1 << 5) // (EMAC) +#define AT91C_EMAC_UND (0x1 << 6) // (EMAC) +// -------- EMAC_RSR : (EMAC Offset: 0x20) Receive Status Register -------- +#define AT91C_EMAC_BNA (0x1 << 0) // (EMAC) +#define AT91C_EMAC_REC (0x1 << 1) // (EMAC) +#define AT91C_EMAC_OVR (0x1 << 2) // (EMAC) +// -------- EMAC_ISR : (EMAC Offset: 0x24) Interrupt Status Register -------- +#define AT91C_EMAC_MFD (0x1 << 0) // (EMAC) +#define AT91C_EMAC_RCOMP (0x1 << 1) // (EMAC) +#define AT91C_EMAC_RXUBR (0x1 << 2) // (EMAC) +#define AT91C_EMAC_TXUBR (0x1 << 3) // (EMAC) +#define AT91C_EMAC_TUNDR (0x1 << 4) // (EMAC) +#define AT91C_EMAC_RLEX (0x1 << 5) // (EMAC) +#define AT91C_EMAC_TXERR (0x1 << 6) // (EMAC) +#define AT91C_EMAC_TCOMP (0x1 << 7) // (EMAC) +#define AT91C_EMAC_LINK (0x1 << 9) // (EMAC) +#define AT91C_EMAC_ROVR (0x1 << 10) // (EMAC) +#define AT91C_EMAC_HRESP (0x1 << 11) // (EMAC) +#define AT91C_EMAC_PFRE (0x1 << 12) // (EMAC) +#define AT91C_EMAC_PTZ (0x1 << 13) // (EMAC) +// -------- EMAC_IER : (EMAC Offset: 0x28) Interrupt Enable Register -------- +// -------- EMAC_IDR : (EMAC Offset: 0x2c) Interrupt Disable Register -------- +// -------- EMAC_IMR : (EMAC Offset: 0x30) Interrupt Mask Register -------- +// -------- EMAC_MAN : (EMAC Offset: 0x34) PHY Maintenance Register -------- +#define AT91C_EMAC_DATA (0xFFFF << 0) // (EMAC) +#define AT91C_EMAC_CODE (0x3 << 16) // (EMAC) +#define AT91C_EMAC_REGA (0x1F << 18) // (EMAC) +#define AT91C_EMAC_PHYA (0x1F << 23) // (EMAC) +#define AT91C_EMAC_RW (0x3 << 28) // (EMAC) +#define AT91C_EMAC_SOF (0x3 << 30) // (EMAC) +// -------- EMAC_USRIO : (EMAC Offset: 0xc0) USER Input Output Register -------- +#define AT91C_EMAC_RMII (0x1 << 0) // (EMAC) Reduce MII +#define AT91C_EMAC_CLKEN (0x1 << 1) // (EMAC) Clock Enable +// -------- EMAC_WOL : (EMAC Offset: 0xc4) Wake On LAN Register -------- +#define AT91C_EMAC_IP (0xFFFF << 0) // (EMAC) ARP request IP address +#define AT91C_EMAC_MAG (0x1 << 16) // (EMAC) Magic packet event enable +#define AT91C_EMAC_ARP (0x1 << 17) // (EMAC) ARP request event enable +#define AT91C_EMAC_SA1 (0x1 << 18) // (EMAC) Specific address register 1 event enable +// -------- EMAC_REV : (EMAC Offset: 0xfc) Revision Register -------- +#define AT91C_EMAC_REVREF (0xFFFF << 0) // (EMAC) +#define AT91C_EMAC_PARTREF (0xFFFF << 16) // (EMAC) + +// ***************************************************************************** +// SOFTWARE API DEFINITION FOR Analog to Digital Convertor +// ***************************************************************************** +#ifndef __ASSEMBLY__ +typedef struct _AT91S_ADC { + AT91_REG ADC_CR; // ADC Control Register + AT91_REG ADC_MR; // ADC Mode Register + AT91_REG Reserved0[2]; // + AT91_REG ADC_CHER; // ADC Channel Enable Register + AT91_REG ADC_CHDR; // ADC Channel Disable Register + AT91_REG ADC_CHSR; // ADC Channel Status Register + AT91_REG ADC_SR; // ADC Status Register + AT91_REG ADC_LCDR; // ADC Last Converted Data Register + AT91_REG ADC_IER; // ADC Interrupt Enable Register + AT91_REG ADC_IDR; // ADC Interrupt Disable Register + AT91_REG ADC_IMR; // ADC Interrupt Mask Register + AT91_REG ADC_CDR0; // ADC Channel Data Register 0 + AT91_REG ADC_CDR1; // ADC Channel Data Register 1 + AT91_REG ADC_CDR2; // ADC Channel Data Register 2 + AT91_REG ADC_CDR3; // ADC Channel Data Register 3 + AT91_REG ADC_CDR4; // ADC Channel Data Register 4 + AT91_REG ADC_CDR5; // ADC Channel Data Register 5 + AT91_REG ADC_CDR6; // ADC Channel Data Register 6 + AT91_REG ADC_CDR7; // ADC Channel Data Register 7 + AT91_REG Reserved1[44]; // + AT91_REG ADC_RPR; // Receive Pointer Register + AT91_REG ADC_RCR; // Receive Counter Register + AT91_REG ADC_TPR; // Transmit Pointer Register + AT91_REG ADC_TCR; // Transmit Counter Register + AT91_REG ADC_RNPR; // Receive Next Pointer Register + AT91_REG ADC_RNCR; // Receive Next Counter Register + AT91_REG ADC_TNPR; // Transmit Next Pointer Register + AT91_REG ADC_TNCR; // Transmit Next Counter Register + AT91_REG ADC_PTCR; // PDC Transfer Control Register + AT91_REG ADC_PTSR; // PDC Transfer Status Register +} AT91S_ADC, *AT91PS_ADC; +#else +#define ADC_CR (AT91_CAST(AT91_REG *) 0x00000000) // (ADC_CR) ADC Control Register +#define ADC_MR (AT91_CAST(AT91_REG *) 0x00000004) // (ADC_MR) ADC Mode Register +#define ADC_CHER (AT91_CAST(AT91_REG *) 0x00000010) // (ADC_CHER) ADC Channel Enable Register +#define ADC_CHDR (AT91_CAST(AT91_REG *) 0x00000014) // (ADC_CHDR) ADC Channel Disable Register +#define ADC_CHSR (AT91_CAST(AT91_REG *) 0x00000018) // (ADC_CHSR) ADC Channel Status Register +#define ADC_SR (AT91_CAST(AT91_REG *) 0x0000001C) // (ADC_SR) ADC Status Register +#define ADC_LCDR (AT91_CAST(AT91_REG *) 0x00000020) // (ADC_LCDR) ADC Last Converted Data Register +#define ADC_IER (AT91_CAST(AT91_REG *) 0x00000024) // (ADC_IER) ADC Interrupt Enable Register +#define ADC_IDR (AT91_CAST(AT91_REG *) 0x00000028) // (ADC_IDR) ADC Interrupt Disable Register +#define ADC_IMR (AT91_CAST(AT91_REG *) 0x0000002C) // (ADC_IMR) ADC Interrupt Mask Register +#define ADC_CDR0 (AT91_CAST(AT91_REG *) 0x00000030) // (ADC_CDR0) ADC Channel Data Register 0 +#define ADC_CDR1 (AT91_CAST(AT91_REG *) 0x00000034) // (ADC_CDR1) ADC Channel Data Register 1 +#define ADC_CDR2 (AT91_CAST(AT91_REG *) 0x00000038) // (ADC_CDR2) ADC Channel Data Register 2 +#define ADC_CDR3 (AT91_CAST(AT91_REG *) 0x0000003C) // (ADC_CDR3) ADC Channel Data Register 3 +#define ADC_CDR4 (AT91_CAST(AT91_REG *) 0x00000040) // (ADC_CDR4) ADC Channel Data Register 4 +#define ADC_CDR5 (AT91_CAST(AT91_REG *) 0x00000044) // (ADC_CDR5) ADC Channel Data Register 5 +#define ADC_CDR6 (AT91_CAST(AT91_REG *) 0x00000048) // (ADC_CDR6) ADC Channel Data Register 6 +#define ADC_CDR7 (AT91_CAST(AT91_REG *) 0x0000004C) // (ADC_CDR7) ADC Channel Data Register 7 + +#endif +// -------- ADC_CR : (ADC Offset: 0x0) ADC Control Register -------- +#define AT91C_ADC_SWRST (0x1 << 0) // (ADC) Software Reset +#define AT91C_ADC_START (0x1 << 1) // (ADC) Start Conversion +// -------- ADC_MR : (ADC Offset: 0x4) ADC Mode Register -------- +#define AT91C_ADC_TRGEN (0x1 << 0) // (ADC) Trigger Enable +#define AT91C_ADC_TRGEN_DIS (0x0) // (ADC) Hradware triggers are disabled. Starting a conversion is only possible by software +#define AT91C_ADC_TRGEN_EN (0x1) // (ADC) Hardware trigger selected by TRGSEL field is enabled. +#define AT91C_ADC_TRGSEL (0x7 << 1) // (ADC) Trigger Selection +#define AT91C_ADC_TRGSEL_TIOA0 (0x0 << 1) // (ADC) Selected TRGSEL = TIAO0 +#define AT91C_ADC_TRGSEL_TIOA1 (0x1 << 1) // (ADC) Selected TRGSEL = TIAO1 +#define AT91C_ADC_TRGSEL_TIOA2 (0x2 << 1) // (ADC) Selected TRGSEL = TIAO2 +#define AT91C_ADC_TRGSEL_TIOA3 (0x3 << 1) // (ADC) Selected TRGSEL = TIAO3 +#define AT91C_ADC_TRGSEL_TIOA4 (0x4 << 1) // (ADC) Selected TRGSEL = TIAO4 +#define AT91C_ADC_TRGSEL_TIOA5 (0x5 << 1) // (ADC) Selected TRGSEL = TIAO5 +#define AT91C_ADC_TRGSEL_EXT (0x6 << 1) // (ADC) Selected TRGSEL = External Trigger +#define AT91C_ADC_LOWRES (0x1 << 4) // (ADC) Resolution. +#define AT91C_ADC_LOWRES_10_BIT (0x0 << 4) // (ADC) 10-bit resolution +#define AT91C_ADC_LOWRES_8_BIT (0x1 << 4) // (ADC) 8-bit resolution +#define AT91C_ADC_SLEEP (0x1 << 5) // (ADC) Sleep Mode +#define AT91C_ADC_SLEEP_NORMAL_MODE (0x0 << 5) // (ADC) Normal Mode +#define AT91C_ADC_SLEEP_MODE (0x1 << 5) // (ADC) Sleep Mode +#define AT91C_ADC_PRESCAL (0x3F << 8) // (ADC) Prescaler rate selection +#define AT91C_ADC_STARTUP (0x1F << 16) // (ADC) Startup Time +#define AT91C_ADC_SHTIM (0xF << 24) // (ADC) Sample & Hold Time +// -------- ADC_CHER : (ADC Offset: 0x10) ADC Channel Enable Register -------- +#define AT91C_ADC_CH0 (0x1 << 0) // (ADC) Channel 0 +#define AT91C_ADC_CH1 (0x1 << 1) // (ADC) Channel 1 +#define AT91C_ADC_CH2 (0x1 << 2) // (ADC) Channel 2 +#define AT91C_ADC_CH3 (0x1 << 3) // (ADC) Channel 3 +#define AT91C_ADC_CH4 (0x1 << 4) // (ADC) Channel 4 +#define AT91C_ADC_CH5 (0x1 << 5) // (ADC) Channel 5 +#define AT91C_ADC_CH6 (0x1 << 6) // (ADC) Channel 6 +#define AT91C_ADC_CH7 (0x1 << 7) // (ADC) Channel 7 +// -------- ADC_CHDR : (ADC Offset: 0x14) ADC Channel Disable Register -------- +// -------- ADC_CHSR : (ADC Offset: 0x18) ADC Channel Status Register -------- +// -------- ADC_SR : (ADC Offset: 0x1c) ADC Status Register -------- +#define AT91C_ADC_EOC0 (0x1 << 0) // (ADC) End of Conversion +#define AT91C_ADC_EOC1 (0x1 << 1) // (ADC) End of Conversion +#define AT91C_ADC_EOC2 (0x1 << 2) // (ADC) End of Conversion +#define AT91C_ADC_EOC3 (0x1 << 3) // (ADC) End of Conversion +#define AT91C_ADC_EOC4 (0x1 << 4) // (ADC) End of Conversion +#define AT91C_ADC_EOC5 (0x1 << 5) // (ADC) End of Conversion +#define AT91C_ADC_EOC6 (0x1 << 6) // (ADC) End of Conversion +#define AT91C_ADC_EOC7 (0x1 << 7) // (ADC) End of Conversion +#define AT91C_ADC_OVRE0 (0x1 << 8) // (ADC) Overrun Error +#define AT91C_ADC_OVRE1 (0x1 << 9) // (ADC) Overrun Error +#define AT91C_ADC_OVRE2 (0x1 << 10) // (ADC) Overrun Error +#define AT91C_ADC_OVRE3 (0x1 << 11) // (ADC) Overrun Error +#define AT91C_ADC_OVRE4 (0x1 << 12) // (ADC) Overrun Error +#define AT91C_ADC_OVRE5 (0x1 << 13) // (ADC) Overrun Error +#define AT91C_ADC_OVRE6 (0x1 << 14) // (ADC) Overrun Error +#define AT91C_ADC_OVRE7 (0x1 << 15) // (ADC) Overrun Error +#define AT91C_ADC_DRDY (0x1 << 16) // (ADC) Data Ready +#define AT91C_ADC_GOVRE (0x1 << 17) // (ADC) General Overrun +#define AT91C_ADC_ENDRX (0x1 << 18) // (ADC) End of Receiver Transfer +#define AT91C_ADC_RXBUFF (0x1 << 19) // (ADC) RXBUFF Interrupt +// -------- ADC_LCDR : (ADC Offset: 0x20) ADC Last Converted Data Register -------- +#define AT91C_ADC_LDATA (0x3FF << 0) // (ADC) Last Data Converted +// -------- ADC_IER : (ADC Offset: 0x24) ADC Interrupt Enable Register -------- +// -------- ADC_IDR : (ADC Offset: 0x28) ADC Interrupt Disable Register -------- +// -------- ADC_IMR : (ADC Offset: 0x2c) ADC Interrupt Mask Register -------- +// -------- ADC_CDR0 : (ADC Offset: 0x30) ADC Channel Data Register 0 -------- +#define AT91C_ADC_DATA (0x3FF << 0) // (ADC) Converted Data +// -------- ADC_CDR1 : (ADC Offset: 0x34) ADC Channel Data Register 1 -------- +// -------- ADC_CDR2 : (ADC Offset: 0x38) ADC Channel Data Register 2 -------- +// -------- ADC_CDR3 : (ADC Offset: 0x3c) ADC Channel Data Register 3 -------- +// -------- ADC_CDR4 : (ADC Offset: 0x40) ADC Channel Data Register 4 -------- +// -------- ADC_CDR5 : (ADC Offset: 0x44) ADC Channel Data Register 5 -------- +// -------- ADC_CDR6 : (ADC Offset: 0x48) ADC Channel Data Register 6 -------- +// -------- ADC_CDR7 : (ADC Offset: 0x4c) ADC Channel Data Register 7 -------- + +// ***************************************************************************** +// REGISTER ADDRESS DEFINITION FOR AT91SAM7X256 +// ***************************************************************************** +// ========== Register definition for SYS peripheral ========== +// ========== Register definition for AIC peripheral ========== +#define AT91C_AIC_IVR (AT91_CAST(AT91_REG *) 0xFFFFF100) // (AIC) IRQ Vector Register +#define AT91C_AIC_SMR (AT91_CAST(AT91_REG *) 0xFFFFF000) // (AIC) Source Mode Register +#define AT91C_AIC_FVR (AT91_CAST(AT91_REG *) 0xFFFFF104) // (AIC) FIQ Vector Register +#define AT91C_AIC_DCR (AT91_CAST(AT91_REG *) 0xFFFFF138) // (AIC) Debug Control Register (Protect) +#define AT91C_AIC_EOICR (AT91_CAST(AT91_REG *) 0xFFFFF130) // (AIC) End of Interrupt Command Register +#define AT91C_AIC_SVR (AT91_CAST(AT91_REG *) 0xFFFFF080) // (AIC) Source Vector Register +#define AT91C_AIC_FFSR (AT91_CAST(AT91_REG *) 0xFFFFF148) // (AIC) Fast Forcing Status Register +#define AT91C_AIC_ICCR (AT91_CAST(AT91_REG *) 0xFFFFF128) // (AIC) Interrupt Clear Command Register +#define AT91C_AIC_ISR (AT91_CAST(AT91_REG *) 0xFFFFF108) // (AIC) Interrupt Status Register +#define AT91C_AIC_IMR (AT91_CAST(AT91_REG *) 0xFFFFF110) // (AIC) Interrupt Mask Register +#define AT91C_AIC_IPR (AT91_CAST(AT91_REG *) 0xFFFFF10C) // (AIC) Interrupt Pending Register +#define AT91C_AIC_FFER (AT91_CAST(AT91_REG *) 0xFFFFF140) // (AIC) Fast Forcing Enable Register +#define AT91C_AIC_IECR (AT91_CAST(AT91_REG *) 0xFFFFF120) // (AIC) Interrupt Enable Command Register +#define AT91C_AIC_ISCR (AT91_CAST(AT91_REG *) 0xFFFFF12C) // (AIC) Interrupt Set Command Register +#define AT91C_AIC_FFDR (AT91_CAST(AT91_REG *) 0xFFFFF144) // (AIC) Fast Forcing Disable Register +#define AT91C_AIC_CISR (AT91_CAST(AT91_REG *) 0xFFFFF114) // (AIC) Core Interrupt Status Register +#define AT91C_AIC_IDCR (AT91_CAST(AT91_REG *) 0xFFFFF124) // (AIC) Interrupt Disable Command Register +#define AT91C_AIC_SPU (AT91_CAST(AT91_REG *) 0xFFFFF134) // (AIC) Spurious Vector Register +// ========== Register definition for PDC_DBGU peripheral ========== +#define AT91C_DBGU_TCR (AT91_CAST(AT91_REG *) 0xFFFFF30C) // (PDC_DBGU) Transmit Counter Register +#define AT91C_DBGU_RNPR (AT91_CAST(AT91_REG *) 0xFFFFF310) // (PDC_DBGU) Receive Next Pointer Register +#define AT91C_DBGU_TNPR (AT91_CAST(AT91_REG *) 0xFFFFF318) // (PDC_DBGU) Transmit Next Pointer Register +#define AT91C_DBGU_TPR (AT91_CAST(AT91_REG *) 0xFFFFF308) // (PDC_DBGU) Transmit Pointer Register +#define AT91C_DBGU_RPR (AT91_CAST(AT91_REG *) 0xFFFFF300) // (PDC_DBGU) Receive Pointer Register +#define AT91C_DBGU_RCR (AT91_CAST(AT91_REG *) 0xFFFFF304) // (PDC_DBGU) Receive Counter Register +#define AT91C_DBGU_RNCR (AT91_CAST(AT91_REG *) 0xFFFFF314) // (PDC_DBGU) Receive Next Counter Register +#define AT91C_DBGU_PTCR (AT91_CAST(AT91_REG *) 0xFFFFF320) // (PDC_DBGU) PDC Transfer Control Register +#define AT91C_DBGU_PTSR (AT91_CAST(AT91_REG *) 0xFFFFF324) // (PDC_DBGU) PDC Transfer Status Register +#define AT91C_DBGU_TNCR (AT91_CAST(AT91_REG *) 0xFFFFF31C) // (PDC_DBGU) Transmit Next Counter Register +// ========== Register definition for DBGU peripheral ========== +#define AT91C_DBGU_EXID (AT91_CAST(AT91_REG *) 0xFFFFF244) // (DBGU) Chip ID Extension Register +#define AT91C_DBGU_BRGR (AT91_CAST(AT91_REG *) 0xFFFFF220) // (DBGU) Baud Rate Generator Register +#define AT91C_DBGU_IDR (AT91_CAST(AT91_REG *) 0xFFFFF20C) // (DBGU) Interrupt Disable Register +#define AT91C_DBGU_CSR (AT91_CAST(AT91_REG *) 0xFFFFF214) // (DBGU) Channel Status Register +#define AT91C_DBGU_CIDR (AT91_CAST(AT91_REG *) 0xFFFFF240) // (DBGU) Chip ID Register +#define AT91C_DBGU_MR (AT91_CAST(AT91_REG *) 0xFFFFF204) // (DBGU) Mode Register +#define AT91C_DBGU_IMR (AT91_CAST(AT91_REG *) 0xFFFFF210) // (DBGU) Interrupt Mask Register +#define AT91C_DBGU_CR (AT91_CAST(AT91_REG *) 0xFFFFF200) // (DBGU) Control Register +#define AT91C_DBGU_FNTR (AT91_CAST(AT91_REG *) 0xFFFFF248) // (DBGU) Force NTRST Register +#define AT91C_DBGU_THR (AT91_CAST(AT91_REG *) 0xFFFFF21C) // (DBGU) Transmitter Holding Register +#define AT91C_DBGU_RHR (AT91_CAST(AT91_REG *) 0xFFFFF218) // (DBGU) Receiver Holding Register +#define AT91C_DBGU_IER (AT91_CAST(AT91_REG *) 0xFFFFF208) // (DBGU) Interrupt Enable Register +// ========== Register definition for PIOA peripheral ========== +#define AT91C_PIOA_ODR (AT91_CAST(AT91_REG *) 0xFFFFF414) // (PIOA) Output Disable Registerr +#define AT91C_PIOA_SODR (AT91_CAST(AT91_REG *) 0xFFFFF430) // (PIOA) Set Output Data Register +#define AT91C_PIOA_ISR (AT91_CAST(AT91_REG *) 0xFFFFF44C) // (PIOA) Interrupt Status Register +#define AT91C_PIOA_ABSR (AT91_CAST(AT91_REG *) 0xFFFFF478) // (PIOA) AB Select Status Register +#define AT91C_PIOA_IER (AT91_CAST(AT91_REG *) 0xFFFFF440) // (PIOA) Interrupt Enable Register +#define AT91C_PIOA_PPUDR (AT91_CAST(AT91_REG *) 0xFFFFF460) // (PIOA) Pull-up Disable Register +#define AT91C_PIOA_IMR (AT91_CAST(AT91_REG *) 0xFFFFF448) // (PIOA) Interrupt Mask Register +#define AT91C_PIOA_PER (AT91_CAST(AT91_REG *) 0xFFFFF400) // (PIOA) PIO Enable Register +#define AT91C_PIOA_IFDR (AT91_CAST(AT91_REG *) 0xFFFFF424) // (PIOA) Input Filter Disable Register +#define AT91C_PIOA_OWDR (AT91_CAST(AT91_REG *) 0xFFFFF4A4) // (PIOA) Output Write Disable Register +#define AT91C_PIOA_MDSR (AT91_CAST(AT91_REG *) 0xFFFFF458) // (PIOA) Multi-driver Status Register +#define AT91C_PIOA_IDR (AT91_CAST(AT91_REG *) 0xFFFFF444) // (PIOA) Interrupt Disable Register +#define AT91C_PIOA_ODSR (AT91_CAST(AT91_REG *) 0xFFFFF438) // (PIOA) Output Data Status Register +#define AT91C_PIOA_PPUSR (AT91_CAST(AT91_REG *) 0xFFFFF468) // (PIOA) Pull-up Status Register +#define AT91C_PIOA_OWSR (AT91_CAST(AT91_REG *) 0xFFFFF4A8) // (PIOA) Output Write Status Register +#define AT91C_PIOA_BSR (AT91_CAST(AT91_REG *) 0xFFFFF474) // (PIOA) Select B Register +#define AT91C_PIOA_OWER (AT91_CAST(AT91_REG *) 0xFFFFF4A0) // (PIOA) Output Write Enable Register +#define AT91C_PIOA_IFER (AT91_CAST(AT91_REG *) 0xFFFFF420) // (PIOA) Input Filter Enable Register +#define AT91C_PIOA_PDSR (AT91_CAST(AT91_REG *) 0xFFFFF43C) // (PIOA) Pin Data Status Register +#define AT91C_PIOA_PPUER (AT91_CAST(AT91_REG *) 0xFFFFF464) // (PIOA) Pull-up Enable Register +#define AT91C_PIOA_OSR (AT91_CAST(AT91_REG *) 0xFFFFF418) // (PIOA) Output Status Register +#define AT91C_PIOA_ASR (AT91_CAST(AT91_REG *) 0xFFFFF470) // (PIOA) Select A Register +#define AT91C_PIOA_MDDR (AT91_CAST(AT91_REG *) 0xFFFFF454) // (PIOA) Multi-driver Disable Register +#define AT91C_PIOA_CODR (AT91_CAST(AT91_REG *) 0xFFFFF434) // (PIOA) Clear Output Data Register +#define AT91C_PIOA_MDER (AT91_CAST(AT91_REG *) 0xFFFFF450) // (PIOA) Multi-driver Enable Register +#define AT91C_PIOA_PDR (AT91_CAST(AT91_REG *) 0xFFFFF404) // (PIOA) PIO Disable Register +#define AT91C_PIOA_IFSR (AT91_CAST(AT91_REG *) 0xFFFFF428) // (PIOA) Input Filter Status Register +#define AT91C_PIOA_OER (AT91_CAST(AT91_REG *) 0xFFFFF410) // (PIOA) Output Enable Register +#define AT91C_PIOA_PSR (AT91_CAST(AT91_REG *) 0xFFFFF408) // (PIOA) PIO Status Register +// ========== Register definition for PIOB peripheral ========== +#define AT91C_PIOB_OWDR (AT91_CAST(AT91_REG *) 0xFFFFF6A4) // (PIOB) Output Write Disable Register +#define AT91C_PIOB_MDER (AT91_CAST(AT91_REG *) 0xFFFFF650) // (PIOB) Multi-driver Enable Register +#define AT91C_PIOB_PPUSR (AT91_CAST(AT91_REG *) 0xFFFFF668) // (PIOB) Pull-up Status Register +#define AT91C_PIOB_IMR (AT91_CAST(AT91_REG *) 0xFFFFF648) // (PIOB) Interrupt Mask Register +#define AT91C_PIOB_ASR (AT91_CAST(AT91_REG *) 0xFFFFF670) // (PIOB) Select A Register +#define AT91C_PIOB_PPUDR (AT91_CAST(AT91_REG *) 0xFFFFF660) // (PIOB) Pull-up Disable Register +#define AT91C_PIOB_PSR (AT91_CAST(AT91_REG *) 0xFFFFF608) // (PIOB) PIO Status Register +#define AT91C_PIOB_IER (AT91_CAST(AT91_REG *) 0xFFFFF640) // (PIOB) Interrupt Enable Register +#define AT91C_PIOB_CODR (AT91_CAST(AT91_REG *) 0xFFFFF634) // (PIOB) Clear Output Data Register +#define AT91C_PIOB_OWER (AT91_CAST(AT91_REG *) 0xFFFFF6A0) // (PIOB) Output Write Enable Register +#define AT91C_PIOB_ABSR (AT91_CAST(AT91_REG *) 0xFFFFF678) // (PIOB) AB Select Status Register +#define AT91C_PIOB_IFDR (AT91_CAST(AT91_REG *) 0xFFFFF624) // (PIOB) Input Filter Disable Register +#define AT91C_PIOB_PDSR (AT91_CAST(AT91_REG *) 0xFFFFF63C) // (PIOB) Pin Data Status Register +#define AT91C_PIOB_IDR (AT91_CAST(AT91_REG *) 0xFFFFF644) // (PIOB) Interrupt Disable Register +#define AT91C_PIOB_OWSR (AT91_CAST(AT91_REG *) 0xFFFFF6A8) // (PIOB) Output Write Status Register +#define AT91C_PIOB_PDR (AT91_CAST(AT91_REG *) 0xFFFFF604) // (PIOB) PIO Disable Register +#define AT91C_PIOB_ODR (AT91_CAST(AT91_REG *) 0xFFFFF614) // (PIOB) Output Disable Registerr +#define AT91C_PIOB_IFSR (AT91_CAST(AT91_REG *) 0xFFFFF628) // (PIOB) Input Filter Status Register +#define AT91C_PIOB_PPUER (AT91_CAST(AT91_REG *) 0xFFFFF664) // (PIOB) Pull-up Enable Register +#define AT91C_PIOB_SODR (AT91_CAST(AT91_REG *) 0xFFFFF630) // (PIOB) Set Output Data Register +#define AT91C_PIOB_ISR (AT91_CAST(AT91_REG *) 0xFFFFF64C) // (PIOB) Interrupt Status Register +#define AT91C_PIOB_ODSR (AT91_CAST(AT91_REG *) 0xFFFFF638) // (PIOB) Output Data Status Register +#define AT91C_PIOB_OSR (AT91_CAST(AT91_REG *) 0xFFFFF618) // (PIOB) Output Status Register +#define AT91C_PIOB_MDSR (AT91_CAST(AT91_REG *) 0xFFFFF658) // (PIOB) Multi-driver Status Register +#define AT91C_PIOB_IFER (AT91_CAST(AT91_REG *) 0xFFFFF620) // (PIOB) Input Filter Enable Register +#define AT91C_PIOB_BSR (AT91_CAST(AT91_REG *) 0xFFFFF674) // (PIOB) Select B Register +#define AT91C_PIOB_MDDR (AT91_CAST(AT91_REG *) 0xFFFFF654) // (PIOB) Multi-driver Disable Register +#define AT91C_PIOB_OER (AT91_CAST(AT91_REG *) 0xFFFFF610) // (PIOB) Output Enable Register +#define AT91C_PIOB_PER (AT91_CAST(AT91_REG *) 0xFFFFF600) // (PIOB) PIO Enable Register +// ========== Register definition for CKGR peripheral ========== +#define AT91C_CKGR_MOR (AT91_CAST(AT91_REG *) 0xFFFFFC20) // (CKGR) Main Oscillator Register +#define AT91C_CKGR_PLLR (AT91_CAST(AT91_REG *) 0xFFFFFC2C) // (CKGR) PLL Register +#define AT91C_CKGR_MCFR (AT91_CAST(AT91_REG *) 0xFFFFFC24) // (CKGR) Main Clock Frequency Register +// ========== Register definition for PMC peripheral ========== +#define AT91C_PMC_IDR (AT91_CAST(AT91_REG *) 0xFFFFFC64) // (PMC) Interrupt Disable Register +#define AT91C_PMC_MOR (AT91_CAST(AT91_REG *) 0xFFFFFC20) // (PMC) Main Oscillator Register +#define AT91C_PMC_PLLR (AT91_CAST(AT91_REG *) 0xFFFFFC2C) // (PMC) PLL Register +#define AT91C_PMC_PCER (AT91_CAST(AT91_REG *) 0xFFFFFC10) // (PMC) Peripheral Clock Enable Register +#define AT91C_PMC_PCKR (AT91_CAST(AT91_REG *) 0xFFFFFC40) // (PMC) Programmable Clock Register +#define AT91C_PMC_MCKR (AT91_CAST(AT91_REG *) 0xFFFFFC30) // (PMC) Master Clock Register +#define AT91C_PMC_SCDR (AT91_CAST(AT91_REG *) 0xFFFFFC04) // (PMC) System Clock Disable Register +#define AT91C_PMC_PCDR (AT91_CAST(AT91_REG *) 0xFFFFFC14) // (PMC) Peripheral Clock Disable Register +#define AT91C_PMC_SCSR (AT91_CAST(AT91_REG *) 0xFFFFFC08) // (PMC) System Clock Status Register +#define AT91C_PMC_PCSR (AT91_CAST(AT91_REG *) 0xFFFFFC18) // (PMC) Peripheral Clock Status Register +#define AT91C_PMC_MCFR (AT91_CAST(AT91_REG *) 0xFFFFFC24) // (PMC) Main Clock Frequency Register +#define AT91C_PMC_SCER (AT91_CAST(AT91_REG *) 0xFFFFFC00) // (PMC) System Clock Enable Register +#define AT91C_PMC_IMR (AT91_CAST(AT91_REG *) 0xFFFFFC6C) // (PMC) Interrupt Mask Register +#define AT91C_PMC_IER (AT91_CAST(AT91_REG *) 0xFFFFFC60) // (PMC) Interrupt Enable Register +#define AT91C_PMC_SR (AT91_CAST(AT91_REG *) 0xFFFFFC68) // (PMC) Status Register +// ========== Register definition for RSTC peripheral ========== +#define AT91C_RSTC_RCR (AT91_CAST(AT91_REG *) 0xFFFFFD00) // (RSTC) Reset Control Register +#define AT91C_RSTC_RMR (AT91_CAST(AT91_REG *) 0xFFFFFD08) // (RSTC) Reset Mode Register +#define AT91C_RSTC_RSR (AT91_CAST(AT91_REG *) 0xFFFFFD04) // (RSTC) Reset Status Register +// ========== Register definition for RTTC peripheral ========== +#define AT91C_RTTC_RTSR (AT91_CAST(AT91_REG *) 0xFFFFFD2C) // (RTTC) Real-time Status Register +#define AT91C_RTTC_RTMR (AT91_CAST(AT91_REG *) 0xFFFFFD20) // (RTTC) Real-time Mode Register +#define AT91C_RTTC_RTVR (AT91_CAST(AT91_REG *) 0xFFFFFD28) // (RTTC) Real-time Value Register +#define AT91C_RTTC_RTAR (AT91_CAST(AT91_REG *) 0xFFFFFD24) // (RTTC) Real-time Alarm Register +// ========== Register definition for PITC peripheral ========== +#define AT91C_PITC_PIVR (AT91_CAST(AT91_REG *) 0xFFFFFD38) // (PITC) Period Interval Value Register +#define AT91C_PITC_PISR (AT91_CAST(AT91_REG *) 0xFFFFFD34) // (PITC) Period Interval Status Register +#define AT91C_PITC_PIIR (AT91_CAST(AT91_REG *) 0xFFFFFD3C) // (PITC) Period Interval Image Register +#define AT91C_PITC_PIMR (AT91_CAST(AT91_REG *) 0xFFFFFD30) // (PITC) Period Interval Mode Register +// ========== Register definition for WDTC peripheral ========== +#define AT91C_WDTC_WDCR (AT91_CAST(AT91_REG *) 0xFFFFFD40) // (WDTC) Watchdog Control Register +#define AT91C_WDTC_WDSR (AT91_CAST(AT91_REG *) 0xFFFFFD48) // (WDTC) Watchdog Status Register +#define AT91C_WDTC_WDMR (AT91_CAST(AT91_REG *) 0xFFFFFD44) // (WDTC) Watchdog Mode Register +// ========== Register definition for VREG peripheral ========== +#define AT91C_VREG_MR (AT91_CAST(AT91_REG *) 0xFFFFFD60) // (VREG) Voltage Regulator Mode Register +// ========== Register definition for MC peripheral ========== +#define AT91C_MC_ASR (AT91_CAST(AT91_REG *) 0xFFFFFF04) // (MC) MC Abort Status Register +#define AT91C_MC_RCR (AT91_CAST(AT91_REG *) 0xFFFFFF00) // (MC) MC Remap Control Register +#define AT91C_MC_FCR (AT91_CAST(AT91_REG *) 0xFFFFFF64) // (MC) MC Flash Command Register +#define AT91C_MC_AASR (AT91_CAST(AT91_REG *) 0xFFFFFF08) // (MC) MC Abort Address Status Register +#define AT91C_MC_FSR (AT91_CAST(AT91_REG *) 0xFFFFFF68) // (MC) MC Flash Status Register +#define AT91C_MC_FMR (AT91_CAST(AT91_REG *) 0xFFFFFF60) // (MC) MC Flash Mode Register +// ========== Register definition for PDC_SPI1 peripheral ========== +#define AT91C_SPI1_PTCR (AT91_CAST(AT91_REG *) 0xFFFE4120) // (PDC_SPI1) PDC Transfer Control Register +#define AT91C_SPI1_RPR (AT91_CAST(AT91_REG *) 0xFFFE4100) // (PDC_SPI1) Receive Pointer Register +#define AT91C_SPI1_TNCR (AT91_CAST(AT91_REG *) 0xFFFE411C) // (PDC_SPI1) Transmit Next Counter Register +#define AT91C_SPI1_TPR (AT91_CAST(AT91_REG *) 0xFFFE4108) // (PDC_SPI1) Transmit Pointer Register +#define AT91C_SPI1_TNPR (AT91_CAST(AT91_REG *) 0xFFFE4118) // (PDC_SPI1) Transmit Next Pointer Register +#define AT91C_SPI1_TCR (AT91_CAST(AT91_REG *) 0xFFFE410C) // (PDC_SPI1) Transmit Counter Register +#define AT91C_SPI1_RCR (AT91_CAST(AT91_REG *) 0xFFFE4104) // (PDC_SPI1) Receive Counter Register +#define AT91C_SPI1_RNPR (AT91_CAST(AT91_REG *) 0xFFFE4110) // (PDC_SPI1) Receive Next Pointer Register +#define AT91C_SPI1_RNCR (AT91_CAST(AT91_REG *) 0xFFFE4114) // (PDC_SPI1) Receive Next Counter Register +#define AT91C_SPI1_PTSR (AT91_CAST(AT91_REG *) 0xFFFE4124) // (PDC_SPI1) PDC Transfer Status Register +// ========== Register definition for SPI1 peripheral ========== +#define AT91C_SPI1_IMR (AT91_CAST(AT91_REG *) 0xFFFE401C) // (SPI1) Interrupt Mask Register +#define AT91C_SPI1_IER (AT91_CAST(AT91_REG *) 0xFFFE4014) // (SPI1) Interrupt Enable Register +#define AT91C_SPI1_MR (AT91_CAST(AT91_REG *) 0xFFFE4004) // (SPI1) Mode Register +#define AT91C_SPI1_RDR (AT91_CAST(AT91_REG *) 0xFFFE4008) // (SPI1) Receive Data Register +#define AT91C_SPI1_IDR (AT91_CAST(AT91_REG *) 0xFFFE4018) // (SPI1) Interrupt Disable Register +#define AT91C_SPI1_SR (AT91_CAST(AT91_REG *) 0xFFFE4010) // (SPI1) Status Register +#define AT91C_SPI1_TDR (AT91_CAST(AT91_REG *) 0xFFFE400C) // (SPI1) Transmit Data Register +#define AT91C_SPI1_CR (AT91_CAST(AT91_REG *) 0xFFFE4000) // (SPI1) Control Register +#define AT91C_SPI1_CSR (AT91_CAST(AT91_REG *) 0xFFFE4030) // (SPI1) Chip Select Register +// ========== Register definition for PDC_SPI0 peripheral ========== +#define AT91C_SPI0_PTCR (AT91_CAST(AT91_REG *) 0xFFFE0120) // (PDC_SPI0) PDC Transfer Control Register +#define AT91C_SPI0_TPR (AT91_CAST(AT91_REG *) 0xFFFE0108) // (PDC_SPI0) Transmit Pointer Register +#define AT91C_SPI0_TCR (AT91_CAST(AT91_REG *) 0xFFFE010C) // (PDC_SPI0) Transmit Counter Register +#define AT91C_SPI0_RCR (AT91_CAST(AT91_REG *) 0xFFFE0104) // (PDC_SPI0) Receive Counter Register +#define AT91C_SPI0_PTSR (AT91_CAST(AT91_REG *) 0xFFFE0124) // (PDC_SPI0) PDC Transfer Status Register +#define AT91C_SPI0_RNPR (AT91_CAST(AT91_REG *) 0xFFFE0110) // (PDC_SPI0) Receive Next Pointer Register +#define AT91C_SPI0_RPR (AT91_CAST(AT91_REG *) 0xFFFE0100) // (PDC_SPI0) Receive Pointer Register +#define AT91C_SPI0_TNCR (AT91_CAST(AT91_REG *) 0xFFFE011C) // (PDC_SPI0) Transmit Next Counter Register +#define AT91C_SPI0_RNCR (AT91_CAST(AT91_REG *) 0xFFFE0114) // (PDC_SPI0) Receive Next Counter Register +#define AT91C_SPI0_TNPR (AT91_CAST(AT91_REG *) 0xFFFE0118) // (PDC_SPI0) Transmit Next Pointer Register +// ========== Register definition for SPI0 peripheral ========== +#define AT91C_SPI0_IER (AT91_CAST(AT91_REG *) 0xFFFE0014) // (SPI0) Interrupt Enable Register +#define AT91C_SPI0_SR (AT91_CAST(AT91_REG *) 0xFFFE0010) // (SPI0) Status Register +#define AT91C_SPI0_IDR (AT91_CAST(AT91_REG *) 0xFFFE0018) // (SPI0) Interrupt Disable Register +#define AT91C_SPI0_CR (AT91_CAST(AT91_REG *) 0xFFFE0000) // (SPI0) Control Register +#define AT91C_SPI0_MR (AT91_CAST(AT91_REG *) 0xFFFE0004) // (SPI0) Mode Register +#define AT91C_SPI0_IMR (AT91_CAST(AT91_REG *) 0xFFFE001C) // (SPI0) Interrupt Mask Register +#define AT91C_SPI0_TDR (AT91_CAST(AT91_REG *) 0xFFFE000C) // (SPI0) Transmit Data Register +#define AT91C_SPI0_RDR (AT91_CAST(AT91_REG *) 0xFFFE0008) // (SPI0) Receive Data Register +#define AT91C_SPI0_CSR (AT91_CAST(AT91_REG *) 0xFFFE0030) // (SPI0) Chip Select Register +// ========== Register definition for PDC_US1 peripheral ========== +#define AT91C_US1_RNCR (AT91_CAST(AT91_REG *) 0xFFFC4114) // (PDC_US1) Receive Next Counter Register +#define AT91C_US1_PTCR (AT91_CAST(AT91_REG *) 0xFFFC4120) // (PDC_US1) PDC Transfer Control Register +#define AT91C_US1_TCR (AT91_CAST(AT91_REG *) 0xFFFC410C) // (PDC_US1) Transmit Counter Register +#define AT91C_US1_PTSR (AT91_CAST(AT91_REG *) 0xFFFC4124) // (PDC_US1) PDC Transfer Status Register +#define AT91C_US1_TNPR (AT91_CAST(AT91_REG *) 0xFFFC4118) // (PDC_US1) Transmit Next Pointer Register +#define AT91C_US1_RCR (AT91_CAST(AT91_REG *) 0xFFFC4104) // (PDC_US1) Receive Counter Register +#define AT91C_US1_RNPR (AT91_CAST(AT91_REG *) 0xFFFC4110) // (PDC_US1) Receive Next Pointer Register +#define AT91C_US1_RPR (AT91_CAST(AT91_REG *) 0xFFFC4100) // (PDC_US1) Receive Pointer Register +#define AT91C_US1_TNCR (AT91_CAST(AT91_REG *) 0xFFFC411C) // (PDC_US1) Transmit Next Counter Register +#define AT91C_US1_TPR (AT91_CAST(AT91_REG *) 0xFFFC4108) // (PDC_US1) Transmit Pointer Register +// ========== Register definition for US1 peripheral ========== +#define AT91C_US1_IF (AT91_CAST(AT91_REG *) 0xFFFC404C) // (US1) IRDA_FILTER Register +#define AT91C_US1_NER (AT91_CAST(AT91_REG *) 0xFFFC4044) // (US1) Nb Errors Register +#define AT91C_US1_RTOR (AT91_CAST(AT91_REG *) 0xFFFC4024) // (US1) Receiver Time-out Register +#define AT91C_US1_CSR (AT91_CAST(AT91_REG *) 0xFFFC4014) // (US1) Channel Status Register +#define AT91C_US1_IDR (AT91_CAST(AT91_REG *) 0xFFFC400C) // (US1) Interrupt Disable Register +#define AT91C_US1_IER (AT91_CAST(AT91_REG *) 0xFFFC4008) // (US1) Interrupt Enable Register +#define AT91C_US1_THR (AT91_CAST(AT91_REG *) 0xFFFC401C) // (US1) Transmitter Holding Register +#define AT91C_US1_TTGR (AT91_CAST(AT91_REG *) 0xFFFC4028) // (US1) Transmitter Time-guard Register +#define AT91C_US1_RHR (AT91_CAST(AT91_REG *) 0xFFFC4018) // (US1) Receiver Holding Register +#define AT91C_US1_BRGR (AT91_CAST(AT91_REG *) 0xFFFC4020) // (US1) Baud Rate Generator Register +#define AT91C_US1_IMR (AT91_CAST(AT91_REG *) 0xFFFC4010) // (US1) Interrupt Mask Register +#define AT91C_US1_FIDI (AT91_CAST(AT91_REG *) 0xFFFC4040) // (US1) FI_DI_Ratio Register +#define AT91C_US1_CR (AT91_CAST(AT91_REG *) 0xFFFC4000) // (US1) Control Register +#define AT91C_US1_MR (AT91_CAST(AT91_REG *) 0xFFFC4004) // (US1) Mode Register +// ========== Register definition for PDC_US0 peripheral ========== +#define AT91C_US0_TNPR (AT91_CAST(AT91_REG *) 0xFFFC0118) // (PDC_US0) Transmit Next Pointer Register +#define AT91C_US0_RNPR (AT91_CAST(AT91_REG *) 0xFFFC0110) // (PDC_US0) Receive Next Pointer Register +#define AT91C_US0_TCR (AT91_CAST(AT91_REG *) 0xFFFC010C) // (PDC_US0) Transmit Counter Register +#define AT91C_US0_PTCR (AT91_CAST(AT91_REG *) 0xFFFC0120) // (PDC_US0) PDC Transfer Control Register +#define AT91C_US0_PTSR (AT91_CAST(AT91_REG *) 0xFFFC0124) // (PDC_US0) PDC Transfer Status Register +#define AT91C_US0_TNCR (AT91_CAST(AT91_REG *) 0xFFFC011C) // (PDC_US0) Transmit Next Counter Register +#define AT91C_US0_TPR (AT91_CAST(AT91_REG *) 0xFFFC0108) // (PDC_US0) Transmit Pointer Register +#define AT91C_US0_RCR (AT91_CAST(AT91_REG *) 0xFFFC0104) // (PDC_US0) Receive Counter Register +#define AT91C_US0_RPR (AT91_CAST(AT91_REG *) 0xFFFC0100) // (PDC_US0) Receive Pointer Register +#define AT91C_US0_RNCR (AT91_CAST(AT91_REG *) 0xFFFC0114) // (PDC_US0) Receive Next Counter Register +// ========== Register definition for US0 peripheral ========== +#define AT91C_US0_BRGR (AT91_CAST(AT91_REG *) 0xFFFC0020) // (US0) Baud Rate Generator Register +#define AT91C_US0_NER (AT91_CAST(AT91_REG *) 0xFFFC0044) // (US0) Nb Errors Register +#define AT91C_US0_CR (AT91_CAST(AT91_REG *) 0xFFFC0000) // (US0) Control Register +#define AT91C_US0_IMR (AT91_CAST(AT91_REG *) 0xFFFC0010) // (US0) Interrupt Mask Register +#define AT91C_US0_FIDI (AT91_CAST(AT91_REG *) 0xFFFC0040) // (US0) FI_DI_Ratio Register +#define AT91C_US0_TTGR (AT91_CAST(AT91_REG *) 0xFFFC0028) // (US0) Transmitter Time-guard Register +#define AT91C_US0_MR (AT91_CAST(AT91_REG *) 0xFFFC0004) // (US0) Mode Register +#define AT91C_US0_RTOR (AT91_CAST(AT91_REG *) 0xFFFC0024) // (US0) Receiver Time-out Register +#define AT91C_US0_CSR (AT91_CAST(AT91_REG *) 0xFFFC0014) // (US0) Channel Status Register +#define AT91C_US0_RHR (AT91_CAST(AT91_REG *) 0xFFFC0018) // (US0) Receiver Holding Register +#define AT91C_US0_IDR (AT91_CAST(AT91_REG *) 0xFFFC000C) // (US0) Interrupt Disable Register +#define AT91C_US0_THR (AT91_CAST(AT91_REG *) 0xFFFC001C) // (US0) Transmitter Holding Register +#define AT91C_US0_IF (AT91_CAST(AT91_REG *) 0xFFFC004C) // (US0) IRDA_FILTER Register +#define AT91C_US0_IER (AT91_CAST(AT91_REG *) 0xFFFC0008) // (US0) Interrupt Enable Register +// ========== Register definition for PDC_SSC peripheral ========== +#define AT91C_SSC_TNCR (AT91_CAST(AT91_REG *) 0xFFFD411C) // (PDC_SSC) Transmit Next Counter Register +#define AT91C_SSC_RPR (AT91_CAST(AT91_REG *) 0xFFFD4100) // (PDC_SSC) Receive Pointer Register +#define AT91C_SSC_RNCR (AT91_CAST(AT91_REG *) 0xFFFD4114) // (PDC_SSC) Receive Next Counter Register +#define AT91C_SSC_TPR (AT91_CAST(AT91_REG *) 0xFFFD4108) // (PDC_SSC) Transmit Pointer Register +#define AT91C_SSC_PTCR (AT91_CAST(AT91_REG *) 0xFFFD4120) // (PDC_SSC) PDC Transfer Control Register +#define AT91C_SSC_TCR (AT91_CAST(AT91_REG *) 0xFFFD410C) // (PDC_SSC) Transmit Counter Register +#define AT91C_SSC_RCR (AT91_CAST(AT91_REG *) 0xFFFD4104) // (PDC_SSC) Receive Counter Register +#define AT91C_SSC_RNPR (AT91_CAST(AT91_REG *) 0xFFFD4110) // (PDC_SSC) Receive Next Pointer Register +#define AT91C_SSC_TNPR (AT91_CAST(AT91_REG *) 0xFFFD4118) // (PDC_SSC) Transmit Next Pointer Register +#define AT91C_SSC_PTSR (AT91_CAST(AT91_REG *) 0xFFFD4124) // (PDC_SSC) PDC Transfer Status Register +// ========== Register definition for SSC peripheral ========== +#define AT91C_SSC_RHR (AT91_CAST(AT91_REG *) 0xFFFD4020) // (SSC) Receive Holding Register +#define AT91C_SSC_RSHR (AT91_CAST(AT91_REG *) 0xFFFD4030) // (SSC) Receive Sync Holding Register +#define AT91C_SSC_TFMR (AT91_CAST(AT91_REG *) 0xFFFD401C) // (SSC) Transmit Frame Mode Register +#define AT91C_SSC_IDR (AT91_CAST(AT91_REG *) 0xFFFD4048) // (SSC) Interrupt Disable Register +#define AT91C_SSC_THR (AT91_CAST(AT91_REG *) 0xFFFD4024) // (SSC) Transmit Holding Register +#define AT91C_SSC_RCMR (AT91_CAST(AT91_REG *) 0xFFFD4010) // (SSC) Receive Clock ModeRegister +#define AT91C_SSC_IER (AT91_CAST(AT91_REG *) 0xFFFD4044) // (SSC) Interrupt Enable Register +#define AT91C_SSC_TSHR (AT91_CAST(AT91_REG *) 0xFFFD4034) // (SSC) Transmit Sync Holding Register +#define AT91C_SSC_SR (AT91_CAST(AT91_REG *) 0xFFFD4040) // (SSC) Status Register +#define AT91C_SSC_CMR (AT91_CAST(AT91_REG *) 0xFFFD4004) // (SSC) Clock Mode Register +#define AT91C_SSC_TCMR (AT91_CAST(AT91_REG *) 0xFFFD4018) // (SSC) Transmit Clock Mode Register +#define AT91C_SSC_CR (AT91_CAST(AT91_REG *) 0xFFFD4000) // (SSC) Control Register +#define AT91C_SSC_IMR (AT91_CAST(AT91_REG *) 0xFFFD404C) // (SSC) Interrupt Mask Register +#define AT91C_SSC_RFMR (AT91_CAST(AT91_REG *) 0xFFFD4014) // (SSC) Receive Frame Mode Register +// ========== Register definition for TWI peripheral ========== +#define AT91C_TWI_IER (AT91_CAST(AT91_REG *) 0xFFFB8024) // (TWI) Interrupt Enable Register +#define AT91C_TWI_CR (AT91_CAST(AT91_REG *) 0xFFFB8000) // (TWI) Control Register +#define AT91C_TWI_SR (AT91_CAST(AT91_REG *) 0xFFFB8020) // (TWI) Status Register +#define AT91C_TWI_IMR (AT91_CAST(AT91_REG *) 0xFFFB802C) // (TWI) Interrupt Mask Register +#define AT91C_TWI_THR (AT91_CAST(AT91_REG *) 0xFFFB8034) // (TWI) Transmit Holding Register +#define AT91C_TWI_IDR (AT91_CAST(AT91_REG *) 0xFFFB8028) // (TWI) Interrupt Disable Register +#define AT91C_TWI_IADR (AT91_CAST(AT91_REG *) 0xFFFB800C) // (TWI) Internal Address Register +#define AT91C_TWI_MMR (AT91_CAST(AT91_REG *) 0xFFFB8004) // (TWI) Master Mode Register +#define AT91C_TWI_CWGR (AT91_CAST(AT91_REG *) 0xFFFB8010) // (TWI) Clock Waveform Generator Register +#define AT91C_TWI_RHR (AT91_CAST(AT91_REG *) 0xFFFB8030) // (TWI) Receive Holding Register +// ========== Register definition for PWMC_CH3 peripheral ========== +#define AT91C_PWMC_CH3_CUPDR (AT91_CAST(AT91_REG *) 0xFFFCC270) // (PWMC_CH3) Channel Update Register +#define AT91C_PWMC_CH3_Reserved (AT91_CAST(AT91_REG *) 0xFFFCC274) // (PWMC_CH3) Reserved +#define AT91C_PWMC_CH3_CPRDR (AT91_CAST(AT91_REG *) 0xFFFCC268) // (PWMC_CH3) Channel Period Register +#define AT91C_PWMC_CH3_CDTYR (AT91_CAST(AT91_REG *) 0xFFFCC264) // (PWMC_CH3) Channel Duty Cycle Register +#define AT91C_PWMC_CH3_CCNTR (AT91_CAST(AT91_REG *) 0xFFFCC26C) // (PWMC_CH3) Channel Counter Register +#define AT91C_PWMC_CH3_CMR (AT91_CAST(AT91_REG *) 0xFFFCC260) // (PWMC_CH3) Channel Mode Register +// ========== Register definition for PWMC_CH2 peripheral ========== +#define AT91C_PWMC_CH2_Reserved (AT91_CAST(AT91_REG *) 0xFFFCC254) // (PWMC_CH2) Reserved +#define AT91C_PWMC_CH2_CMR (AT91_CAST(AT91_REG *) 0xFFFCC240) // (PWMC_CH2) Channel Mode Register +#define AT91C_PWMC_CH2_CCNTR (AT91_CAST(AT91_REG *) 0xFFFCC24C) // (PWMC_CH2) Channel Counter Register +#define AT91C_PWMC_CH2_CPRDR (AT91_CAST(AT91_REG *) 0xFFFCC248) // (PWMC_CH2) Channel Period Register +#define AT91C_PWMC_CH2_CUPDR (AT91_CAST(AT91_REG *) 0xFFFCC250) // (PWMC_CH2) Channel Update Register +#define AT91C_PWMC_CH2_CDTYR (AT91_CAST(AT91_REG *) 0xFFFCC244) // (PWMC_CH2) Channel Duty Cycle Register +// ========== Register definition for PWMC_CH1 peripheral ========== +#define AT91C_PWMC_CH1_Reserved (AT91_CAST(AT91_REG *) 0xFFFCC234) // (PWMC_CH1) Reserved +#define AT91C_PWMC_CH1_CUPDR (AT91_CAST(AT91_REG *) 0xFFFCC230) // (PWMC_CH1) Channel Update Register +#define AT91C_PWMC_CH1_CPRDR (AT91_CAST(AT91_REG *) 0xFFFCC228) // (PWMC_CH1) Channel Period Register +#define AT91C_PWMC_CH1_CCNTR (AT91_CAST(AT91_REG *) 0xFFFCC22C) // (PWMC_CH1) Channel Counter Register +#define AT91C_PWMC_CH1_CDTYR (AT91_CAST(AT91_REG *) 0xFFFCC224) // (PWMC_CH1) Channel Duty Cycle Register +#define AT91C_PWMC_CH1_CMR (AT91_CAST(AT91_REG *) 0xFFFCC220) // (PWMC_CH1) Channel Mode Register +// ========== Register definition for PWMC_CH0 peripheral ========== +#define AT91C_PWMC_CH0_Reserved (AT91_CAST(AT91_REG *) 0xFFFCC214) // (PWMC_CH0) Reserved +#define AT91C_PWMC_CH0_CPRDR (AT91_CAST(AT91_REG *) 0xFFFCC208) // (PWMC_CH0) Channel Period Register +#define AT91C_PWMC_CH0_CDTYR (AT91_CAST(AT91_REG *) 0xFFFCC204) // (PWMC_CH0) Channel Duty Cycle Register +#define AT91C_PWMC_CH0_CMR (AT91_CAST(AT91_REG *) 0xFFFCC200) // (PWMC_CH0) Channel Mode Register +#define AT91C_PWMC_CH0_CUPDR (AT91_CAST(AT91_REG *) 0xFFFCC210) // (PWMC_CH0) Channel Update Register +#define AT91C_PWMC_CH0_CCNTR (AT91_CAST(AT91_REG *) 0xFFFCC20C) // (PWMC_CH0) Channel Counter Register +// ========== Register definition for PWMC peripheral ========== +#define AT91C_PWMC_IDR (AT91_CAST(AT91_REG *) 0xFFFCC014) // (PWMC) PWMC Interrupt Disable Register +#define AT91C_PWMC_DIS (AT91_CAST(AT91_REG *) 0xFFFCC008) // (PWMC) PWMC Disable Register +#define AT91C_PWMC_IER (AT91_CAST(AT91_REG *) 0xFFFCC010) // (PWMC) PWMC Interrupt Enable Register +#define AT91C_PWMC_VR (AT91_CAST(AT91_REG *) 0xFFFCC0FC) // (PWMC) PWMC Version Register +#define AT91C_PWMC_ISR (AT91_CAST(AT91_REG *) 0xFFFCC01C) // (PWMC) PWMC Interrupt Status Register +#define AT91C_PWMC_SR (AT91_CAST(AT91_REG *) 0xFFFCC00C) // (PWMC) PWMC Status Register +#define AT91C_PWMC_IMR (AT91_CAST(AT91_REG *) 0xFFFCC018) // (PWMC) PWMC Interrupt Mask Register +#define AT91C_PWMC_MR (AT91_CAST(AT91_REG *) 0xFFFCC000) // (PWMC) PWMC Mode Register +#define AT91C_PWMC_ENA (AT91_CAST(AT91_REG *) 0xFFFCC004) // (PWMC) PWMC Enable Register +// ========== Register definition for UDP peripheral ========== +#define AT91C_UDP_IMR (AT91_CAST(AT91_REG *) 0xFFFB0018) // (UDP) Interrupt Mask Register +#define AT91C_UDP_FADDR (AT91_CAST(AT91_REG *) 0xFFFB0008) // (UDP) Function Address Register +#define AT91C_UDP_NUM (AT91_CAST(AT91_REG *) 0xFFFB0000) // (UDP) Frame Number Register +#define AT91C_UDP_FDR (AT91_CAST(AT91_REG *) 0xFFFB0050) // (UDP) Endpoint FIFO Data Register +#define AT91C_UDP_ISR (AT91_CAST(AT91_REG *) 0xFFFB001C) // (UDP) Interrupt Status Register +#define AT91C_UDP_CSR (AT91_CAST(AT91_REG *) 0xFFFB0030) // (UDP) Endpoint Control and Status Register +#define AT91C_UDP_IDR (AT91_CAST(AT91_REG *) 0xFFFB0014) // (UDP) Interrupt Disable Register +#define AT91C_UDP_ICR (AT91_CAST(AT91_REG *) 0xFFFB0020) // (UDP) Interrupt Clear Register +#define AT91C_UDP_RSTEP (AT91_CAST(AT91_REG *) 0xFFFB0028) // (UDP) Reset Endpoint Register +#define AT91C_UDP_TXVC (AT91_CAST(AT91_REG *) 0xFFFB0074) // (UDP) Transceiver Control Register +#define AT91C_UDP_GLBSTATE (AT91_CAST(AT91_REG *) 0xFFFB0004) // (UDP) Global State Register +#define AT91C_UDP_IER (AT91_CAST(AT91_REG *) 0xFFFB0010) // (UDP) Interrupt Enable Register +// ========== Register definition for TC0 peripheral ========== +#define AT91C_TC0_SR (AT91_CAST(AT91_REG *) 0xFFFA0020) // (TC0) Status Register +#define AT91C_TC0_RC (AT91_CAST(AT91_REG *) 0xFFFA001C) // (TC0) Register C +#define AT91C_TC0_RB (AT91_CAST(AT91_REG *) 0xFFFA0018) // (TC0) Register B +#define AT91C_TC0_CCR (AT91_CAST(AT91_REG *) 0xFFFA0000) // (TC0) Channel Control Register +#define AT91C_TC0_CMR (AT91_CAST(AT91_REG *) 0xFFFA0004) // (TC0) Channel Mode Register (Capture Mode / Waveform Mode) +#define AT91C_TC0_IER (AT91_CAST(AT91_REG *) 0xFFFA0024) // (TC0) Interrupt Enable Register +#define AT91C_TC0_RA (AT91_CAST(AT91_REG *) 0xFFFA0014) // (TC0) Register A +#define AT91C_TC0_IDR (AT91_CAST(AT91_REG *) 0xFFFA0028) // (TC0) Interrupt Disable Register +#define AT91C_TC0_CV (AT91_CAST(AT91_REG *) 0xFFFA0010) // (TC0) Counter Value +#define AT91C_TC0_IMR (AT91_CAST(AT91_REG *) 0xFFFA002C) // (TC0) Interrupt Mask Register +// ========== Register definition for TC1 peripheral ========== +#define AT91C_TC1_RB (AT91_CAST(AT91_REG *) 0xFFFA0058) // (TC1) Register B +#define AT91C_TC1_CCR (AT91_CAST(AT91_REG *) 0xFFFA0040) // (TC1) Channel Control Register +#define AT91C_TC1_IER (AT91_CAST(AT91_REG *) 0xFFFA0064) // (TC1) Interrupt Enable Register +#define AT91C_TC1_IDR (AT91_CAST(AT91_REG *) 0xFFFA0068) // (TC1) Interrupt Disable Register +#define AT91C_TC1_SR (AT91_CAST(AT91_REG *) 0xFFFA0060) // (TC1) Status Register +#define AT91C_TC1_CMR (AT91_CAST(AT91_REG *) 0xFFFA0044) // (TC1) Channel Mode Register (Capture Mode / Waveform Mode) +#define AT91C_TC1_RA (AT91_CAST(AT91_REG *) 0xFFFA0054) // (TC1) Register A +#define AT91C_TC1_RC (AT91_CAST(AT91_REG *) 0xFFFA005C) // (TC1) Register C +#define AT91C_TC1_IMR (AT91_CAST(AT91_REG *) 0xFFFA006C) // (TC1) Interrupt Mask Register +#define AT91C_TC1_CV (AT91_CAST(AT91_REG *) 0xFFFA0050) // (TC1) Counter Value +// ========== Register definition for TC2 peripheral ========== +#define AT91C_TC2_CMR (AT91_CAST(AT91_REG *) 0xFFFA0084) // (TC2) Channel Mode Register (Capture Mode / Waveform Mode) +#define AT91C_TC2_CCR (AT91_CAST(AT91_REG *) 0xFFFA0080) // (TC2) Channel Control Register +#define AT91C_TC2_CV (AT91_CAST(AT91_REG *) 0xFFFA0090) // (TC2) Counter Value +#define AT91C_TC2_RA (AT91_CAST(AT91_REG *) 0xFFFA0094) // (TC2) Register A +#define AT91C_TC2_RB (AT91_CAST(AT91_REG *) 0xFFFA0098) // (TC2) Register B +#define AT91C_TC2_IDR (AT91_CAST(AT91_REG *) 0xFFFA00A8) // (TC2) Interrupt Disable Register +#define AT91C_TC2_IMR (AT91_CAST(AT91_REG *) 0xFFFA00AC) // (TC2) Interrupt Mask Register +#define AT91C_TC2_RC (AT91_CAST(AT91_REG *) 0xFFFA009C) // (TC2) Register C +#define AT91C_TC2_IER (AT91_CAST(AT91_REG *) 0xFFFA00A4) // (TC2) Interrupt Enable Register +#define AT91C_TC2_SR (AT91_CAST(AT91_REG *) 0xFFFA00A0) // (TC2) Status Register +// ========== Register definition for TCB peripheral ========== +#define AT91C_TCB_BMR (AT91_CAST(AT91_REG *) 0xFFFA00C4) // (TCB) TC Block Mode Register +#define AT91C_TCB_BCR (AT91_CAST(AT91_REG *) 0xFFFA00C0) // (TCB) TC Block Control Register +// ========== Register definition for CAN_MB0 peripheral ========== +#define AT91C_CAN_MB0_MDL (AT91_CAST(AT91_REG *) 0xFFFD0214) // (CAN_MB0) MailBox Data Low Register +#define AT91C_CAN_MB0_MAM (AT91_CAST(AT91_REG *) 0xFFFD0204) // (CAN_MB0) MailBox Acceptance Mask Register +#define AT91C_CAN_MB0_MCR (AT91_CAST(AT91_REG *) 0xFFFD021C) // (CAN_MB0) MailBox Control Register +#define AT91C_CAN_MB0_MID (AT91_CAST(AT91_REG *) 0xFFFD0208) // (CAN_MB0) MailBox ID Register +#define AT91C_CAN_MB0_MSR (AT91_CAST(AT91_REG *) 0xFFFD0210) // (CAN_MB0) MailBox Status Register +#define AT91C_CAN_MB0_MFID (AT91_CAST(AT91_REG *) 0xFFFD020C) // (CAN_MB0) MailBox Family ID Register +#define AT91C_CAN_MB0_MDH (AT91_CAST(AT91_REG *) 0xFFFD0218) // (CAN_MB0) MailBox Data High Register +#define AT91C_CAN_MB0_MMR (AT91_CAST(AT91_REG *) 0xFFFD0200) // (CAN_MB0) MailBox Mode Register +// ========== Register definition for CAN_MB1 peripheral ========== +#define AT91C_CAN_MB1_MDL (AT91_CAST(AT91_REG *) 0xFFFD0234) // (CAN_MB1) MailBox Data Low Register +#define AT91C_CAN_MB1_MID (AT91_CAST(AT91_REG *) 0xFFFD0228) // (CAN_MB1) MailBox ID Register +#define AT91C_CAN_MB1_MMR (AT91_CAST(AT91_REG *) 0xFFFD0220) // (CAN_MB1) MailBox Mode Register +#define AT91C_CAN_MB1_MSR (AT91_CAST(AT91_REG *) 0xFFFD0230) // (CAN_MB1) MailBox Status Register +#define AT91C_CAN_MB1_MAM (AT91_CAST(AT91_REG *) 0xFFFD0224) // (CAN_MB1) MailBox Acceptance Mask Register +#define AT91C_CAN_MB1_MDH (AT91_CAST(AT91_REG *) 0xFFFD0238) // (CAN_MB1) MailBox Data High Register +#define AT91C_CAN_MB1_MCR (AT91_CAST(AT91_REG *) 0xFFFD023C) // (CAN_MB1) MailBox Control Register +#define AT91C_CAN_MB1_MFID (AT91_CAST(AT91_REG *) 0xFFFD022C) // (CAN_MB1) MailBox Family ID Register +// ========== Register definition for CAN_MB2 peripheral ========== +#define AT91C_CAN_MB2_MCR (AT91_CAST(AT91_REG *) 0xFFFD025C) // (CAN_MB2) MailBox Control Register +#define AT91C_CAN_MB2_MDH (AT91_CAST(AT91_REG *) 0xFFFD0258) // (CAN_MB2) MailBox Data High Register +#define AT91C_CAN_MB2_MID (AT91_CAST(AT91_REG *) 0xFFFD0248) // (CAN_MB2) MailBox ID Register +#define AT91C_CAN_MB2_MDL (AT91_CAST(AT91_REG *) 0xFFFD0254) // (CAN_MB2) MailBox Data Low Register +#define AT91C_CAN_MB2_MMR (AT91_CAST(AT91_REG *) 0xFFFD0240) // (CAN_MB2) MailBox Mode Register +#define AT91C_CAN_MB2_MAM (AT91_CAST(AT91_REG *) 0xFFFD0244) // (CAN_MB2) MailBox Acceptance Mask Register +#define AT91C_CAN_MB2_MFID (AT91_CAST(AT91_REG *) 0xFFFD024C) // (CAN_MB2) MailBox Family ID Register +#define AT91C_CAN_MB2_MSR (AT91_CAST(AT91_REG *) 0xFFFD0250) // (CAN_MB2) MailBox Status Register +// ========== Register definition for CAN_MB3 peripheral ========== +#define AT91C_CAN_MB3_MFID (AT91_CAST(AT91_REG *) 0xFFFD026C) // (CAN_MB3) MailBox Family ID Register +#define AT91C_CAN_MB3_MAM (AT91_CAST(AT91_REG *) 0xFFFD0264) // (CAN_MB3) MailBox Acceptance Mask Register +#define AT91C_CAN_MB3_MID (AT91_CAST(AT91_REG *) 0xFFFD0268) // (CAN_MB3) MailBox ID Register +#define AT91C_CAN_MB3_MCR (AT91_CAST(AT91_REG *) 0xFFFD027C) // (CAN_MB3) MailBox Control Register +#define AT91C_CAN_MB3_MMR (AT91_CAST(AT91_REG *) 0xFFFD0260) // (CAN_MB3) MailBox Mode Register +#define AT91C_CAN_MB3_MSR (AT91_CAST(AT91_REG *) 0xFFFD0270) // (CAN_MB3) MailBox Status Register +#define AT91C_CAN_MB3_MDL (AT91_CAST(AT91_REG *) 0xFFFD0274) // (CAN_MB3) MailBox Data Low Register +#define AT91C_CAN_MB3_MDH (AT91_CAST(AT91_REG *) 0xFFFD0278) // (CAN_MB3) MailBox Data High Register +// ========== Register definition for CAN_MB4 peripheral ========== +#define AT91C_CAN_MB4_MID (AT91_CAST(AT91_REG *) 0xFFFD0288) // (CAN_MB4) MailBox ID Register +#define AT91C_CAN_MB4_MMR (AT91_CAST(AT91_REG *) 0xFFFD0280) // (CAN_MB4) MailBox Mode Register +#define AT91C_CAN_MB4_MDH (AT91_CAST(AT91_REG *) 0xFFFD0298) // (CAN_MB4) MailBox Data High Register +#define AT91C_CAN_MB4_MFID (AT91_CAST(AT91_REG *) 0xFFFD028C) // (CAN_MB4) MailBox Family ID Register +#define AT91C_CAN_MB4_MSR (AT91_CAST(AT91_REG *) 0xFFFD0290) // (CAN_MB4) MailBox Status Register +#define AT91C_CAN_MB4_MCR (AT91_CAST(AT91_REG *) 0xFFFD029C) // (CAN_MB4) MailBox Control Register +#define AT91C_CAN_MB4_MDL (AT91_CAST(AT91_REG *) 0xFFFD0294) // (CAN_MB4) MailBox Data Low Register +#define AT91C_CAN_MB4_MAM (AT91_CAST(AT91_REG *) 0xFFFD0284) // (CAN_MB4) MailBox Acceptance Mask Register +// ========== Register definition for CAN_MB5 peripheral ========== +#define AT91C_CAN_MB5_MSR (AT91_CAST(AT91_REG *) 0xFFFD02B0) // (CAN_MB5) MailBox Status Register +#define AT91C_CAN_MB5_MCR (AT91_CAST(AT91_REG *) 0xFFFD02BC) // (CAN_MB5) MailBox Control Register +#define AT91C_CAN_MB5_MFID (AT91_CAST(AT91_REG *) 0xFFFD02AC) // (CAN_MB5) MailBox Family ID Register +#define AT91C_CAN_MB5_MDH (AT91_CAST(AT91_REG *) 0xFFFD02B8) // (CAN_MB5) MailBox Data High Register +#define AT91C_CAN_MB5_MID (AT91_CAST(AT91_REG *) 0xFFFD02A8) // (CAN_MB5) MailBox ID Register +#define AT91C_CAN_MB5_MMR (AT91_CAST(AT91_REG *) 0xFFFD02A0) // (CAN_MB5) MailBox Mode Register +#define AT91C_CAN_MB5_MDL (AT91_CAST(AT91_REG *) 0xFFFD02B4) // (CAN_MB5) MailBox Data Low Register +#define AT91C_CAN_MB5_MAM (AT91_CAST(AT91_REG *) 0xFFFD02A4) // (CAN_MB5) MailBox Acceptance Mask Register +// ========== Register definition for CAN_MB6 peripheral ========== +#define AT91C_CAN_MB6_MFID (AT91_CAST(AT91_REG *) 0xFFFD02CC) // (CAN_MB6) MailBox Family ID Register +#define AT91C_CAN_MB6_MID (AT91_CAST(AT91_REG *) 0xFFFD02C8) // (CAN_MB6) MailBox ID Register +#define AT91C_CAN_MB6_MAM (AT91_CAST(AT91_REG *) 0xFFFD02C4) // (CAN_MB6) MailBox Acceptance Mask Register +#define AT91C_CAN_MB6_MSR (AT91_CAST(AT91_REG *) 0xFFFD02D0) // (CAN_MB6) MailBox Status Register +#define AT91C_CAN_MB6_MDL (AT91_CAST(AT91_REG *) 0xFFFD02D4) // (CAN_MB6) MailBox Data Low Register +#define AT91C_CAN_MB6_MCR (AT91_CAST(AT91_REG *) 0xFFFD02DC) // (CAN_MB6) MailBox Control Register +#define AT91C_CAN_MB6_MDH (AT91_CAST(AT91_REG *) 0xFFFD02D8) // (CAN_MB6) MailBox Data High Register +#define AT91C_CAN_MB6_MMR (AT91_CAST(AT91_REG *) 0xFFFD02C0) // (CAN_MB6) MailBox Mode Register +// ========== Register definition for CAN_MB7 peripheral ========== +#define AT91C_CAN_MB7_MCR (AT91_CAST(AT91_REG *) 0xFFFD02FC) // (CAN_MB7) MailBox Control Register +#define AT91C_CAN_MB7_MDH (AT91_CAST(AT91_REG *) 0xFFFD02F8) // (CAN_MB7) MailBox Data High Register +#define AT91C_CAN_MB7_MFID (AT91_CAST(AT91_REG *) 0xFFFD02EC) // (CAN_MB7) MailBox Family ID Register +#define AT91C_CAN_MB7_MDL (AT91_CAST(AT91_REG *) 0xFFFD02F4) // (CAN_MB7) MailBox Data Low Register +#define AT91C_CAN_MB7_MID (AT91_CAST(AT91_REG *) 0xFFFD02E8) // (CAN_MB7) MailBox ID Register +#define AT91C_CAN_MB7_MMR (AT91_CAST(AT91_REG *) 0xFFFD02E0) // (CAN_MB7) MailBox Mode Register +#define AT91C_CAN_MB7_MAM (AT91_CAST(AT91_REG *) 0xFFFD02E4) // (CAN_MB7) MailBox Acceptance Mask Register +#define AT91C_CAN_MB7_MSR (AT91_CAST(AT91_REG *) 0xFFFD02F0) // (CAN_MB7) MailBox Status Register +// ========== Register definition for CAN peripheral ========== +#define AT91C_CAN_TCR (AT91_CAST(AT91_REG *) 0xFFFD0024) // (CAN) Transfer Command Register +#define AT91C_CAN_IMR (AT91_CAST(AT91_REG *) 0xFFFD000C) // (CAN) Interrupt Mask Register +#define AT91C_CAN_IER (AT91_CAST(AT91_REG *) 0xFFFD0004) // (CAN) Interrupt Enable Register +#define AT91C_CAN_ECR (AT91_CAST(AT91_REG *) 0xFFFD0020) // (CAN) Error Counter Register +#define AT91C_CAN_TIMESTP (AT91_CAST(AT91_REG *) 0xFFFD001C) // (CAN) Time Stamp Register +#define AT91C_CAN_MR (AT91_CAST(AT91_REG *) 0xFFFD0000) // (CAN) Mode Register +#define AT91C_CAN_IDR (AT91_CAST(AT91_REG *) 0xFFFD0008) // (CAN) Interrupt Disable Register +#define AT91C_CAN_ACR (AT91_CAST(AT91_REG *) 0xFFFD0028) // (CAN) Abort Command Register +#define AT91C_CAN_TIM (AT91_CAST(AT91_REG *) 0xFFFD0018) // (CAN) Timer Register +#define AT91C_CAN_SR (AT91_CAST(AT91_REG *) 0xFFFD0010) // (CAN) Status Register +#define AT91C_CAN_BR (AT91_CAST(AT91_REG *) 0xFFFD0014) // (CAN) Baudrate Register +#define AT91C_CAN_VR (AT91_CAST(AT91_REG *) 0xFFFD00FC) // (CAN) Version Register +// ========== Register definition for EMAC peripheral ========== +#define AT91C_EMAC_ISR (AT91_CAST(AT91_REG *) 0xFFFDC024) // (EMAC) Interrupt Status Register +#define AT91C_EMAC_SA4H (AT91_CAST(AT91_REG *) 0xFFFDC0B4) // (EMAC) Specific Address 4 Top, Last 2 bytes +#define AT91C_EMAC_SA1L (AT91_CAST(AT91_REG *) 0xFFFDC098) // (EMAC) Specific Address 1 Bottom, First 4 bytes +#define AT91C_EMAC_ELE (AT91_CAST(AT91_REG *) 0xFFFDC078) // (EMAC) Excessive Length Errors Register +#define AT91C_EMAC_LCOL (AT91_CAST(AT91_REG *) 0xFFFDC05C) // (EMAC) Late Collision Register +#define AT91C_EMAC_RLE (AT91_CAST(AT91_REG *) 0xFFFDC088) // (EMAC) Receive Length Field Mismatch Register +#define AT91C_EMAC_WOL (AT91_CAST(AT91_REG *) 0xFFFDC0C4) // (EMAC) Wake On LAN Register +#define AT91C_EMAC_DTF (AT91_CAST(AT91_REG *) 0xFFFDC058) // (EMAC) Deferred Transmission Frame Register +#define AT91C_EMAC_TUND (AT91_CAST(AT91_REG *) 0xFFFDC064) // (EMAC) Transmit Underrun Error Register +#define AT91C_EMAC_NCR (AT91_CAST(AT91_REG *) 0xFFFDC000) // (EMAC) Network Control Register +#define AT91C_EMAC_SA4L (AT91_CAST(AT91_REG *) 0xFFFDC0B0) // (EMAC) Specific Address 4 Bottom, First 4 bytes +#define AT91C_EMAC_RSR (AT91_CAST(AT91_REG *) 0xFFFDC020) // (EMAC) Receive Status Register +#define AT91C_EMAC_SA3L (AT91_CAST(AT91_REG *) 0xFFFDC0A8) // (EMAC) Specific Address 3 Bottom, First 4 bytes +#define AT91C_EMAC_TSR (AT91_CAST(AT91_REG *) 0xFFFDC014) // (EMAC) Transmit Status Register +#define AT91C_EMAC_IDR (AT91_CAST(AT91_REG *) 0xFFFDC02C) // (EMAC) Interrupt Disable Register +#define AT91C_EMAC_RSE (AT91_CAST(AT91_REG *) 0xFFFDC074) // (EMAC) Receive Symbol Errors Register +#define AT91C_EMAC_ECOL (AT91_CAST(AT91_REG *) 0xFFFDC060) // (EMAC) Excessive Collision Register +#define AT91C_EMAC_TID (AT91_CAST(AT91_REG *) 0xFFFDC0B8) // (EMAC) Type ID Checking Register +#define AT91C_EMAC_HRB (AT91_CAST(AT91_REG *) 0xFFFDC090) // (EMAC) Hash Address Bottom[31:0] +#define AT91C_EMAC_TBQP (AT91_CAST(AT91_REG *) 0xFFFDC01C) // (EMAC) Transmit Buffer Queue Pointer +#define AT91C_EMAC_USRIO (AT91_CAST(AT91_REG *) 0xFFFDC0C0) // (EMAC) USER Input/Output Register +#define AT91C_EMAC_PTR (AT91_CAST(AT91_REG *) 0xFFFDC038) // (EMAC) Pause Time Register +#define AT91C_EMAC_SA2H (AT91_CAST(AT91_REG *) 0xFFFDC0A4) // (EMAC) Specific Address 2 Top, Last 2 bytes +#define AT91C_EMAC_ROV (AT91_CAST(AT91_REG *) 0xFFFDC070) // (EMAC) Receive Overrun Errors Register +#define AT91C_EMAC_ALE (AT91_CAST(AT91_REG *) 0xFFFDC054) // (EMAC) Alignment Error Register +#define AT91C_EMAC_RJA (AT91_CAST(AT91_REG *) 0xFFFDC07C) // (EMAC) Receive Jabbers Register +#define AT91C_EMAC_RBQP (AT91_CAST(AT91_REG *) 0xFFFDC018) // (EMAC) Receive Buffer Queue Pointer +#define AT91C_EMAC_TPF (AT91_CAST(AT91_REG *) 0xFFFDC08C) // (EMAC) Transmitted Pause Frames Register +#define AT91C_EMAC_NCFGR (AT91_CAST(AT91_REG *) 0xFFFDC004) // (EMAC) Network Configuration Register +#define AT91C_EMAC_HRT (AT91_CAST(AT91_REG *) 0xFFFDC094) // (EMAC) Hash Address Top[63:32] +#define AT91C_EMAC_USF (AT91_CAST(AT91_REG *) 0xFFFDC080) // (EMAC) Undersize Frames Register +#define AT91C_EMAC_FCSE (AT91_CAST(AT91_REG *) 0xFFFDC050) // (EMAC) Frame Check Sequence Error Register +#define AT91C_EMAC_TPQ (AT91_CAST(AT91_REG *) 0xFFFDC0BC) // (EMAC) Transmit Pause Quantum Register +#define AT91C_EMAC_MAN (AT91_CAST(AT91_REG *) 0xFFFDC034) // (EMAC) PHY Maintenance Register +#define AT91C_EMAC_FTO (AT91_CAST(AT91_REG *) 0xFFFDC040) // (EMAC) Frames Transmitted OK Register +#define AT91C_EMAC_REV (AT91_CAST(AT91_REG *) 0xFFFDC0FC) // (EMAC) Revision Register +#define AT91C_EMAC_IMR (AT91_CAST(AT91_REG *) 0xFFFDC030) // (EMAC) Interrupt Mask Register +#define AT91C_EMAC_SCF (AT91_CAST(AT91_REG *) 0xFFFDC044) // (EMAC) Single Collision Frame Register +#define AT91C_EMAC_PFR (AT91_CAST(AT91_REG *) 0xFFFDC03C) // (EMAC) Pause Frames received Register +#define AT91C_EMAC_MCF (AT91_CAST(AT91_REG *) 0xFFFDC048) // (EMAC) Multiple Collision Frame Register +#define AT91C_EMAC_NSR (AT91_CAST(AT91_REG *) 0xFFFDC008) // (EMAC) Network Status Register +#define AT91C_EMAC_SA2L (AT91_CAST(AT91_REG *) 0xFFFDC0A0) // (EMAC) Specific Address 2 Bottom, First 4 bytes +#define AT91C_EMAC_FRO (AT91_CAST(AT91_REG *) 0xFFFDC04C) // (EMAC) Frames Received OK Register +#define AT91C_EMAC_IER (AT91_CAST(AT91_REG *) 0xFFFDC028) // (EMAC) Interrupt Enable Register +#define AT91C_EMAC_SA1H (AT91_CAST(AT91_REG *) 0xFFFDC09C) // (EMAC) Specific Address 1 Top, Last 2 bytes +#define AT91C_EMAC_CSE (AT91_CAST(AT91_REG *) 0xFFFDC068) // (EMAC) Carrier Sense Error Register +#define AT91C_EMAC_SA3H (AT91_CAST(AT91_REG *) 0xFFFDC0AC) // (EMAC) Specific Address 3 Top, Last 2 bytes +#define AT91C_EMAC_RRE (AT91_CAST(AT91_REG *) 0xFFFDC06C) // (EMAC) Receive Ressource Error Register +#define AT91C_EMAC_STE (AT91_CAST(AT91_REG *) 0xFFFDC084) // (EMAC) SQE Test Error Register +// ========== Register definition for PDC_ADC peripheral ========== +#define AT91C_ADC_PTSR (AT91_CAST(AT91_REG *) 0xFFFD8124) // (PDC_ADC) PDC Transfer Status Register +#define AT91C_ADC_PTCR (AT91_CAST(AT91_REG *) 0xFFFD8120) // (PDC_ADC) PDC Transfer Control Register +#define AT91C_ADC_TNPR (AT91_CAST(AT91_REG *) 0xFFFD8118) // (PDC_ADC) Transmit Next Pointer Register +#define AT91C_ADC_TNCR (AT91_CAST(AT91_REG *) 0xFFFD811C) // (PDC_ADC) Transmit Next Counter Register +#define AT91C_ADC_RNPR (AT91_CAST(AT91_REG *) 0xFFFD8110) // (PDC_ADC) Receive Next Pointer Register +#define AT91C_ADC_RNCR (AT91_CAST(AT91_REG *) 0xFFFD8114) // (PDC_ADC) Receive Next Counter Register +#define AT91C_ADC_RPR (AT91_CAST(AT91_REG *) 0xFFFD8100) // (PDC_ADC) Receive Pointer Register +#define AT91C_ADC_TCR (AT91_CAST(AT91_REG *) 0xFFFD810C) // (PDC_ADC) Transmit Counter Register +#define AT91C_ADC_TPR (AT91_CAST(AT91_REG *) 0xFFFD8108) // (PDC_ADC) Transmit Pointer Register +#define AT91C_ADC_RCR (AT91_CAST(AT91_REG *) 0xFFFD8104) // (PDC_ADC) Receive Counter Register +// ========== Register definition for ADC peripheral ========== +#define AT91C_ADC_CDR2 (AT91_CAST(AT91_REG *) 0xFFFD8038) // (ADC) ADC Channel Data Register 2 +#define AT91C_ADC_CDR3 (AT91_CAST(AT91_REG *) 0xFFFD803C) // (ADC) ADC Channel Data Register 3 +#define AT91C_ADC_CDR0 (AT91_CAST(AT91_REG *) 0xFFFD8030) // (ADC) ADC Channel Data Register 0 +#define AT91C_ADC_CDR5 (AT91_CAST(AT91_REG *) 0xFFFD8044) // (ADC) ADC Channel Data Register 5 +#define AT91C_ADC_CHDR (AT91_CAST(AT91_REG *) 0xFFFD8014) // (ADC) ADC Channel Disable Register +#define AT91C_ADC_SR (AT91_CAST(AT91_REG *) 0xFFFD801C) // (ADC) ADC Status Register +#define AT91C_ADC_CDR4 (AT91_CAST(AT91_REG *) 0xFFFD8040) // (ADC) ADC Channel Data Register 4 +#define AT91C_ADC_CDR1 (AT91_CAST(AT91_REG *) 0xFFFD8034) // (ADC) ADC Channel Data Register 1 +#define AT91C_ADC_LCDR (AT91_CAST(AT91_REG *) 0xFFFD8020) // (ADC) ADC Last Converted Data Register +#define AT91C_ADC_IDR (AT91_CAST(AT91_REG *) 0xFFFD8028) // (ADC) ADC Interrupt Disable Register +#define AT91C_ADC_CR (AT91_CAST(AT91_REG *) 0xFFFD8000) // (ADC) ADC Control Register +#define AT91C_ADC_CDR7 (AT91_CAST(AT91_REG *) 0xFFFD804C) // (ADC) ADC Channel Data Register 7 +#define AT91C_ADC_CDR6 (AT91_CAST(AT91_REG *) 0xFFFD8048) // (ADC) ADC Channel Data Register 6 +#define AT91C_ADC_IER (AT91_CAST(AT91_REG *) 0xFFFD8024) // (ADC) ADC Interrupt Enable Register +#define AT91C_ADC_CHER (AT91_CAST(AT91_REG *) 0xFFFD8010) // (ADC) ADC Channel Enable Register +#define AT91C_ADC_CHSR (AT91_CAST(AT91_REG *) 0xFFFD8018) // (ADC) ADC Channel Status Register +#define AT91C_ADC_MR (AT91_CAST(AT91_REG *) 0xFFFD8004) // (ADC) ADC Mode Register +#define AT91C_ADC_IMR (AT91_CAST(AT91_REG *) 0xFFFD802C) // (ADC) ADC Interrupt Mask Register + +// ***************************************************************************** +// PIO DEFINITIONS FOR AT91SAM7X256 +// ***************************************************************************** +#define AT91C_PIO_PA0 (1 << 0) // Pin Controlled by PA0 +#define AT91C_PA0_RXD0 (AT91C_PIO_PA0) // USART 0 Receive Data +#define AT91C_PIO_PA1 (1 << 1) // Pin Controlled by PA1 +#define AT91C_PA1_TXD0 (AT91C_PIO_PA1) // USART 0 Transmit Data +#define AT91C_PIO_PA10 (1 << 10) // Pin Controlled by PA10 +#define AT91C_PA10_TWD (AT91C_PIO_PA10) // TWI Two-wire Serial Data +#define AT91C_PIO_PA11 (1 << 11) // Pin Controlled by PA11 +#define AT91C_PA11_TWCK (AT91C_PIO_PA11) // TWI Two-wire Serial Clock +#define AT91C_PIO_PA12 (1 << 12) // Pin Controlled by PA12 +#define AT91C_PA12_SPI0_NPCS0 (AT91C_PIO_PA12) // SPI 0 Peripheral Chip Select 0 +#define AT91C_PIO_PA13 (1 << 13) // Pin Controlled by PA13 +#define AT91C_PA13_SPI0_NPCS1 (AT91C_PIO_PA13) // SPI 0 Peripheral Chip Select 1 +#define AT91C_PA13_PCK1 (AT91C_PIO_PA13) // PMC Programmable Clock Output 1 +#define AT91C_PIO_PA14 (1 << 14) // Pin Controlled by PA14 +#define AT91C_PA14_SPI0_NPCS2 (AT91C_PIO_PA14) // SPI 0 Peripheral Chip Select 2 +#define AT91C_PA14_IRQ1 (AT91C_PIO_PA14) // External Interrupt 1 +#define AT91C_PIO_PA15 (1 << 15) // Pin Controlled by PA15 +#define AT91C_PA15_SPI0_NPCS3 (AT91C_PIO_PA15) // SPI 0 Peripheral Chip Select 3 +#define AT91C_PA15_TCLK2 (AT91C_PIO_PA15) // Timer Counter 2 external clock input +#define AT91C_PIO_PA16 (1 << 16) // Pin Controlled by PA16 +#define AT91C_PA16_SPI0_MISO (AT91C_PIO_PA16) // SPI 0 Master In Slave +#define AT91C_PIO_PA17 (1 << 17) // Pin Controlled by PA17 +#define AT91C_PA17_SPI0_MOSI (AT91C_PIO_PA17) // SPI 0 Master Out Slave +#define AT91C_PIO_PA18 (1 << 18) // Pin Controlled by PA18 +#define AT91C_PA18_SPI0_SPCK (AT91C_PIO_PA18) // SPI 0 Serial Clock +#define AT91C_PIO_PA19 (1 << 19) // Pin Controlled by PA19 +#define AT91C_PA19_CANRX (AT91C_PIO_PA19) // CAN Receive +#define AT91C_PIO_PA2 (1 << 2) // Pin Controlled by PA2 +#define AT91C_PA2_SCK0 (AT91C_PIO_PA2) // USART 0 Serial Clock +#define AT91C_PA2_SPI1_NPCS1 (AT91C_PIO_PA2) // SPI 1 Peripheral Chip Select 1 +#define AT91C_PIO_PA20 (1 << 20) // Pin Controlled by PA20 +#define AT91C_PA20_CANTX (AT91C_PIO_PA20) // CAN Transmit +#define AT91C_PIO_PA21 (1 << 21) // Pin Controlled by PA21 +#define AT91C_PA21_TF (AT91C_PIO_PA21) // SSC Transmit Frame Sync +#define AT91C_PA21_SPI1_NPCS0 (AT91C_PIO_PA21) // SPI 1 Peripheral Chip Select 0 +#define AT91C_PIO_PA22 (1 << 22) // Pin Controlled by PA22 +#define AT91C_PA22_TK (AT91C_PIO_PA22) // SSC Transmit Clock +#define AT91C_PA22_SPI1_SPCK (AT91C_PIO_PA22) // SPI 1 Serial Clock +#define AT91C_PIO_PA23 (1 << 23) // Pin Controlled by PA23 +#define AT91C_PA23_TD (AT91C_PIO_PA23) // SSC Transmit data +#define AT91C_PA23_SPI1_MOSI (AT91C_PIO_PA23) // SPI 1 Master Out Slave +#define AT91C_PIO_PA24 (1 << 24) // Pin Controlled by PA24 +#define AT91C_PA24_RD (AT91C_PIO_PA24) // SSC Receive Data +#define AT91C_PA24_SPI1_MISO (AT91C_PIO_PA24) // SPI 1 Master In Slave +#define AT91C_PIO_PA25 (1 << 25) // Pin Controlled by PA25 +#define AT91C_PA25_RK (AT91C_PIO_PA25) // SSC Receive Clock +#define AT91C_PA25_SPI1_NPCS1 (AT91C_PIO_PA25) // SPI 1 Peripheral Chip Select 1 +#define AT91C_PIO_PA26 (1 << 26) // Pin Controlled by PA26 +#define AT91C_PA26_RF (AT91C_PIO_PA26) // SSC Receive Frame Sync +#define AT91C_PA26_SPI1_NPCS2 (AT91C_PIO_PA26) // SPI 1 Peripheral Chip Select 2 +#define AT91C_PIO_PA27 (1 << 27) // Pin Controlled by PA27 +#define AT91C_PA27_DRXD (AT91C_PIO_PA27) // DBGU Debug Receive Data +#define AT91C_PA27_PCK3 (AT91C_PIO_PA27) // PMC Programmable Clock Output 3 +#define AT91C_PIO_PA28 (1 << 28) // Pin Controlled by PA28 +#define AT91C_PA28_DTXD (AT91C_PIO_PA28) // DBGU Debug Transmit Data +#define AT91C_PIO_PA29 (1 << 29) // Pin Controlled by PA29 +#define AT91C_PA29_FIQ (AT91C_PIO_PA29) // AIC Fast Interrupt Input +#define AT91C_PA29_SPI1_NPCS3 (AT91C_PIO_PA29) // SPI 1 Peripheral Chip Select 3 +#define AT91C_PIO_PA3 (1 << 3) // Pin Controlled by PA3 +#define AT91C_PA3_RTS0 (AT91C_PIO_PA3) // USART 0 Ready To Send +#define AT91C_PA3_SPI1_NPCS2 (AT91C_PIO_PA3) // SPI 1 Peripheral Chip Select 2 +#define AT91C_PIO_PA30 (1 << 30) // Pin Controlled by PA30 +#define AT91C_PA30_IRQ0 (AT91C_PIO_PA30) // External Interrupt 0 +#define AT91C_PA30_PCK2 (AT91C_PIO_PA30) // PMC Programmable Clock Output 2 +#define AT91C_PIO_PA4 (1 << 4) // Pin Controlled by PA4 +#define AT91C_PA4_CTS0 (AT91C_PIO_PA4) // USART 0 Clear To Send +#define AT91C_PA4_SPI1_NPCS3 (AT91C_PIO_PA4) // SPI 1 Peripheral Chip Select 3 +#define AT91C_PIO_PA5 (1 << 5) // Pin Controlled by PA5 +#define AT91C_PA5_RXD1 (AT91C_PIO_PA5) // USART 1 Receive Data +#define AT91C_PIO_PA6 (1 << 6) // Pin Controlled by PA6 +#define AT91C_PA6_TXD1 (AT91C_PIO_PA6) // USART 1 Transmit Data +#define AT91C_PIO_PA7 (1 << 7) // Pin Controlled by PA7 +#define AT91C_PA7_SCK1 (AT91C_PIO_PA7) // USART 1 Serial Clock +#define AT91C_PA7_SPI0_NPCS1 (AT91C_PIO_PA7) // SPI 0 Peripheral Chip Select 1 +#define AT91C_PIO_PA8 (1 << 8) // Pin Controlled by PA8 +#define AT91C_PA8_RTS1 (AT91C_PIO_PA8) // USART 1 Ready To Send +#define AT91C_PA8_SPI0_NPCS2 (AT91C_PIO_PA8) // SPI 0 Peripheral Chip Select 2 +#define AT91C_PIO_PA9 (1 << 9) // Pin Controlled by PA9 +#define AT91C_PA9_CTS1 (AT91C_PIO_PA9) // USART 1 Clear To Send +#define AT91C_PA9_SPI0_NPCS3 (AT91C_PIO_PA9) // SPI 0 Peripheral Chip Select 3 +#define AT91C_PIO_PB0 (1 << 0) // Pin Controlled by PB0 +#define AT91C_PB0_ETXCK_EREFCK (AT91C_PIO_PB0) // Ethernet MAC Transmit Clock/Reference Clock +#define AT91C_PB0_PCK0 (AT91C_PIO_PB0) // PMC Programmable Clock Output 0 +#define AT91C_PIO_PB1 (1 << 1) // Pin Controlled by PB1 +#define AT91C_PB1_ETXEN (AT91C_PIO_PB1) // Ethernet MAC Transmit Enable +#define AT91C_PIO_PB10 (1 << 10) // Pin Controlled by PB10 +#define AT91C_PB10_ETX2 (AT91C_PIO_PB10) // Ethernet MAC Transmit Data 2 +#define AT91C_PB10_SPI1_NPCS1 (AT91C_PIO_PB10) // SPI 1 Peripheral Chip Select 1 +#define AT91C_PIO_PB11 (1 << 11) // Pin Controlled by PB11 +#define AT91C_PB11_ETX3 (AT91C_PIO_PB11) // Ethernet MAC Transmit Data 3 +#define AT91C_PB11_SPI1_NPCS2 (AT91C_PIO_PB11) // SPI 1 Peripheral Chip Select 2 +#define AT91C_PIO_PB12 (1 << 12) // Pin Controlled by PB12 +#define AT91C_PB12_ETXER (AT91C_PIO_PB12) // Ethernet MAC Transmikt Coding Error +#define AT91C_PB12_TCLK0 (AT91C_PIO_PB12) // Timer Counter 0 external clock input +#define AT91C_PIO_PB13 (1 << 13) // Pin Controlled by PB13 +#define AT91C_PB13_ERX2 (AT91C_PIO_PB13) // Ethernet MAC Receive Data 2 +#define AT91C_PB13_SPI0_NPCS1 (AT91C_PIO_PB13) // SPI 0 Peripheral Chip Select 1 +#define AT91C_PIO_PB14 (1 << 14) // Pin Controlled by PB14 +#define AT91C_PB14_ERX3 (AT91C_PIO_PB14) // Ethernet MAC Receive Data 3 +#define AT91C_PB14_SPI0_NPCS2 (AT91C_PIO_PB14) // SPI 0 Peripheral Chip Select 2 +#define AT91C_PIO_PB15 (1 << 15) // Pin Controlled by PB15 +#define AT91C_PB15_ERXDV_ECRSDV (AT91C_PIO_PB15) // Ethernet MAC Receive Data Valid +#define AT91C_PIO_PB16 (1 << 16) // Pin Controlled by PB16 +#define AT91C_PB16_ECOL (AT91C_PIO_PB16) // Ethernet MAC Collision Detected +#define AT91C_PB16_SPI1_NPCS3 (AT91C_PIO_PB16) // SPI 1 Peripheral Chip Select 3 +#define AT91C_PIO_PB17 (1 << 17) // Pin Controlled by PB17 +#define AT91C_PB17_ERXCK (AT91C_PIO_PB17) // Ethernet MAC Receive Clock +#define AT91C_PB17_SPI0_NPCS3 (AT91C_PIO_PB17) // SPI 0 Peripheral Chip Select 3 +#define AT91C_PIO_PB18 (1 << 18) // Pin Controlled by PB18 +#define AT91C_PB18_EF100 (AT91C_PIO_PB18) // Ethernet MAC Force 100 Mbits/sec +#define AT91C_PB18_ADTRG (AT91C_PIO_PB18) // ADC External Trigger +#define AT91C_PIO_PB19 (1 << 19) // Pin Controlled by PB19 +#define AT91C_PB19_PWM0 (AT91C_PIO_PB19) // PWM Channel 0 +#define AT91C_PB19_TCLK1 (AT91C_PIO_PB19) // Timer Counter 1 external clock input +#define AT91C_PIO_PB2 (1 << 2) // Pin Controlled by PB2 +#define AT91C_PB2_ETX0 (AT91C_PIO_PB2) // Ethernet MAC Transmit Data 0 +#define AT91C_PIO_PB20 (1 << 20) // Pin Controlled by PB20 +#define AT91C_PB20_PWM1 (AT91C_PIO_PB20) // PWM Channel 1 +#define AT91C_PB20_PCK0 (AT91C_PIO_PB20) // PMC Programmable Clock Output 0 +#define AT91C_PIO_PB21 (1 << 21) // Pin Controlled by PB21 +#define AT91C_PB21_PWM2 (AT91C_PIO_PB21) // PWM Channel 2 +#define AT91C_PB21_PCK1 (AT91C_PIO_PB21) // PMC Programmable Clock Output 1 +#define AT91C_PIO_PB22 (1 << 22) // Pin Controlled by PB22 +#define AT91C_PB22_PWM3 (AT91C_PIO_PB22) // PWM Channel 3 +#define AT91C_PB22_PCK2 (AT91C_PIO_PB22) // PMC Programmable Clock Output 2 +#define AT91C_PIO_PB23 (1 << 23) // Pin Controlled by PB23 +#define AT91C_PB23_TIOA0 (AT91C_PIO_PB23) // Timer Counter 0 Multipurpose Timer I/O Pin A +#define AT91C_PB23_DCD1 (AT91C_PIO_PB23) // USART 1 Data Carrier Detect +#define AT91C_PIO_PB24 (1 << 24) // Pin Controlled by PB24 +#define AT91C_PB24_TIOB0 (AT91C_PIO_PB24) // Timer Counter 0 Multipurpose Timer I/O Pin B +#define AT91C_PB24_DSR1 (AT91C_PIO_PB24) // USART 1 Data Set ready +#define AT91C_PIO_PB25 (1 << 25) // Pin Controlled by PB25 +#define AT91C_PB25_TIOA1 (AT91C_PIO_PB25) // Timer Counter 1 Multipurpose Timer I/O Pin A +#define AT91C_PB25_DTR1 (AT91C_PIO_PB25) // USART 1 Data Terminal ready +#define AT91C_PIO_PB26 (1 << 26) // Pin Controlled by PB26 +#define AT91C_PB26_TIOB1 (AT91C_PIO_PB26) // Timer Counter 1 Multipurpose Timer I/O Pin B +#define AT91C_PB26_RI1 (AT91C_PIO_PB26) // USART 1 Ring Indicator +#define AT91C_PIO_PB27 (1 << 27) // Pin Controlled by PB27 +#define AT91C_PB27_TIOA2 (AT91C_PIO_PB27) // Timer Counter 2 Multipurpose Timer I/O Pin A +#define AT91C_PB27_PWM0 (AT91C_PIO_PB27) // PWM Channel 0 +#define AT91C_PIO_PB28 (1 << 28) // Pin Controlled by PB28 +#define AT91C_PB28_TIOB2 (AT91C_PIO_PB28) // Timer Counter 2 Multipurpose Timer I/O Pin B +#define AT91C_PB28_PWM1 (AT91C_PIO_PB28) // PWM Channel 1 +#define AT91C_PIO_PB29 (1 << 29) // Pin Controlled by PB29 +#define AT91C_PB29_PCK1 (AT91C_PIO_PB29) // PMC Programmable Clock Output 1 +#define AT91C_PB29_PWM2 (AT91C_PIO_PB29) // PWM Channel 2 +#define AT91C_PIO_PB3 (1 << 3) // Pin Controlled by PB3 +#define AT91C_PB3_ETX1 (AT91C_PIO_PB3) // Ethernet MAC Transmit Data 1 +#define AT91C_PIO_PB30 (1 << 30) // Pin Controlled by PB30 +#define AT91C_PB30_PCK2 (AT91C_PIO_PB30) // PMC Programmable Clock Output 2 +#define AT91C_PB30_PWM3 (AT91C_PIO_PB30) // PWM Channel 3 +#define AT91C_PIO_PB4 (1 << 4) // Pin Controlled by PB4 +#define AT91C_PB4_ECRS (AT91C_PIO_PB4) // Ethernet MAC Carrier Sense/Carrier Sense and Data Valid +#define AT91C_PIO_PB5 (1 << 5) // Pin Controlled by PB5 +#define AT91C_PB5_ERX0 (AT91C_PIO_PB5) // Ethernet MAC Receive Data 0 +#define AT91C_PIO_PB6 (1 << 6) // Pin Controlled by PB6 +#define AT91C_PB6_ERX1 (AT91C_PIO_PB6) // Ethernet MAC Receive Data 1 +#define AT91C_PIO_PB7 (1 << 7) // Pin Controlled by PB7 +#define AT91C_PB7_ERXER (AT91C_PIO_PB7) // Ethernet MAC Receive Error +#define AT91C_PIO_PB8 (1 << 8) // Pin Controlled by PB8 +#define AT91C_PB8_EMDC (AT91C_PIO_PB8) // Ethernet MAC Management Data Clock +#define AT91C_PIO_PB9 (1 << 9) // Pin Controlled by PB9 +#define AT91C_PB9_EMDIO (AT91C_PIO_PB9) // Ethernet MAC Management Data Input/Output + +// ***************************************************************************** +// PERIPHERAL ID DEFINITIONS FOR AT91SAM7X256 +// ***************************************************************************** +#define AT91C_ID_FIQ ( 0) // Advanced Interrupt Controller (FIQ) +#define AT91C_ID_SYS ( 1) // System Peripheral +#define AT91C_ID_PIOA ( 2) // Parallel IO Controller A +#define AT91C_ID_PIOB ( 3) // Parallel IO Controller B +#define AT91C_ID_SPI0 ( 4) // Serial Peripheral Interface 0 +#define AT91C_ID_SPI1 ( 5) // Serial Peripheral Interface 1 +#define AT91C_ID_US0 ( 6) // USART 0 +#define AT91C_ID_US1 ( 7) // USART 1 +#define AT91C_ID_SSC ( 8) // Serial Synchronous Controller +#define AT91C_ID_TWI ( 9) // Two-Wire Interface +#define AT91C_ID_PWMC (10) // PWM Controller +#define AT91C_ID_UDP (11) // USB Device Port +#define AT91C_ID_TC0 (12) // Timer Counter 0 +#define AT91C_ID_TC1 (13) // Timer Counter 1 +#define AT91C_ID_TC2 (14) // Timer Counter 2 +#define AT91C_ID_CAN (15) // Control Area Network Controller +#define AT91C_ID_EMAC (16) // Ethernet MAC +#define AT91C_ID_ADC (17) // Analog-to-Digital Converter +#define AT91C_ID_18_Reserved (18) // Reserved +#define AT91C_ID_19_Reserved (19) // Reserved +#define AT91C_ID_20_Reserved (20) // Reserved +#define AT91C_ID_21_Reserved (21) // Reserved +#define AT91C_ID_22_Reserved (22) // Reserved +#define AT91C_ID_23_Reserved (23) // Reserved +#define AT91C_ID_24_Reserved (24) // Reserved +#define AT91C_ID_25_Reserved (25) // Reserved +#define AT91C_ID_26_Reserved (26) // Reserved +#define AT91C_ID_27_Reserved (27) // Reserved +#define AT91C_ID_28_Reserved (28) // Reserved +#define AT91C_ID_29_Reserved (29) // Reserved +#define AT91C_ID_IRQ0 (30) // Advanced Interrupt Controller (IRQ0) +#define AT91C_ID_IRQ1 (31) // Advanced Interrupt Controller (IRQ1) +#define AT91C_ALL_INT (0xC003FFFF) // ALL VALID INTERRUPTS + +// ***************************************************************************** +// BASE ADDRESS DEFINITIONS FOR AT91SAM7X256 +// ***************************************************************************** +#define AT91C_BASE_SYS (AT91_CAST(AT91PS_SYS) 0xFFFFF000) // (SYS) Base Address +#define AT91C_BASE_AIC (AT91_CAST(AT91PS_AIC) 0xFFFFF000) // (AIC) Base Address +#define AT91C_BASE_PDC_DBGU (AT91_CAST(AT91PS_PDC) 0xFFFFF300) // (PDC_DBGU) Base Address +#define AT91C_BASE_DBGU (AT91_CAST(AT91PS_DBGU) 0xFFFFF200) // (DBGU) Base Address +#define AT91C_BASE_PIOA (AT91_CAST(AT91PS_PIO) 0xFFFFF400) // (PIOA) Base Address +#define AT91C_BASE_PIOB (AT91_CAST(AT91PS_PIO) 0xFFFFF600) // (PIOB) Base Address +#define AT91C_BASE_CKGR (AT91_CAST(AT91PS_CKGR) 0xFFFFFC20) // (CKGR) Base Address +#define AT91C_BASE_PMC (AT91_CAST(AT91PS_PMC) 0xFFFFFC00) // (PMC) Base Address +#define AT91C_BASE_RSTC (AT91_CAST(AT91PS_RSTC) 0xFFFFFD00) // (RSTC) Base Address +#define AT91C_BASE_RTTC (AT91_CAST(AT91PS_RTTC) 0xFFFFFD20) // (RTTC) Base Address +#define AT91C_BASE_PITC (AT91_CAST(AT91PS_PITC) 0xFFFFFD30) // (PITC) Base Address +#define AT91C_BASE_WDTC (AT91_CAST(AT91PS_WDTC) 0xFFFFFD40) // (WDTC) Base Address +#define AT91C_BASE_VREG (AT91_CAST(AT91PS_VREG) 0xFFFFFD60) // (VREG) Base Address +#define AT91C_BASE_MC (AT91_CAST(AT91PS_MC) 0xFFFFFF00) // (MC) Base Address +#define AT91C_BASE_PDC_SPI1 (AT91_CAST(AT91PS_PDC) 0xFFFE4100) // (PDC_SPI1) Base Address +#define AT91C_BASE_SPI1 (AT91_CAST(AT91PS_SPI) 0xFFFE4000) // (SPI1) Base Address +#define AT91C_BASE_PDC_SPI0 (AT91_CAST(AT91PS_PDC) 0xFFFE0100) // (PDC_SPI0) Base Address +#define AT91C_BASE_SPI0 (AT91_CAST(AT91PS_SPI) 0xFFFE0000) // (SPI0) Base Address +#define AT91C_BASE_PDC_US1 (AT91_CAST(AT91PS_PDC) 0xFFFC4100) // (PDC_US1) Base Address +#define AT91C_BASE_US1 (AT91_CAST(AT91PS_USART) 0xFFFC4000) // (US1) Base Address +#define AT91C_BASE_PDC_US0 (AT91_CAST(AT91PS_PDC) 0xFFFC0100) // (PDC_US0) Base Address +#define AT91C_BASE_US0 (AT91_CAST(AT91PS_USART) 0xFFFC0000) // (US0) Base Address +#define AT91C_BASE_PDC_SSC (AT91_CAST(AT91PS_PDC) 0xFFFD4100) // (PDC_SSC) Base Address +#define AT91C_BASE_SSC (AT91_CAST(AT91PS_SSC) 0xFFFD4000) // (SSC) Base Address +#define AT91C_BASE_TWI (AT91_CAST(AT91PS_TWI) 0xFFFB8000) // (TWI) Base Address +#define AT91C_BASE_PWMC_CH3 (AT91_CAST(AT91PS_PWMC_CH) 0xFFFCC260) // (PWMC_CH3) Base Address +#define AT91C_BASE_PWMC_CH2 (AT91_CAST(AT91PS_PWMC_CH) 0xFFFCC240) // (PWMC_CH2) Base Address +#define AT91C_BASE_PWMC_CH1 (AT91_CAST(AT91PS_PWMC_CH) 0xFFFCC220) // (PWMC_CH1) Base Address +#define AT91C_BASE_PWMC_CH0 (AT91_CAST(AT91PS_PWMC_CH) 0xFFFCC200) // (PWMC_CH0) Base Address +#define AT91C_BASE_PWMC (AT91_CAST(AT91PS_PWMC) 0xFFFCC000) // (PWMC) Base Address +#define AT91C_BASE_UDP (AT91_CAST(AT91PS_UDP) 0xFFFB0000) // (UDP) Base Address +#define AT91C_BASE_TC0 (AT91_CAST(AT91PS_TC) 0xFFFA0000) // (TC0) Base Address +#define AT91C_BASE_TC1 (AT91_CAST(AT91PS_TC) 0xFFFA0040) // (TC1) Base Address +#define AT91C_BASE_TC2 (AT91_CAST(AT91PS_TC) 0xFFFA0080) // (TC2) Base Address +#define AT91C_BASE_TCB (AT91_CAST(AT91PS_TCB) 0xFFFA0000) // (TCB) Base Address +#define AT91C_BASE_CAN_MB0 (AT91_CAST(AT91PS_CAN_MB) 0xFFFD0200) // (CAN_MB0) Base Address +#define AT91C_BASE_CAN_MB1 (AT91_CAST(AT91PS_CAN_MB) 0xFFFD0220) // (CAN_MB1) Base Address +#define AT91C_BASE_CAN_MB2 (AT91_CAST(AT91PS_CAN_MB) 0xFFFD0240) // (CAN_MB2) Base Address +#define AT91C_BASE_CAN_MB3 (AT91_CAST(AT91PS_CAN_MB) 0xFFFD0260) // (CAN_MB3) Base Address +#define AT91C_BASE_CAN_MB4 (AT91_CAST(AT91PS_CAN_MB) 0xFFFD0280) // (CAN_MB4) Base Address +#define AT91C_BASE_CAN_MB5 (AT91_CAST(AT91PS_CAN_MB) 0xFFFD02A0) // (CAN_MB5) Base Address +#define AT91C_BASE_CAN_MB6 (AT91_CAST(AT91PS_CAN_MB) 0xFFFD02C0) // (CAN_MB6) Base Address +#define AT91C_BASE_CAN_MB7 (AT91_CAST(AT91PS_CAN_MB) 0xFFFD02E0) // (CAN_MB7) Base Address +#define AT91C_BASE_CAN (AT91_CAST(AT91PS_CAN) 0xFFFD0000) // (CAN) Base Address +#define AT91C_BASE_EMAC (AT91_CAST(AT91PS_EMAC) 0xFFFDC000) // (EMAC) Base Address +#define AT91C_BASE_PDC_ADC (AT91_CAST(AT91PS_PDC) 0xFFFD8100) // (PDC_ADC) Base Address +#define AT91C_BASE_ADC (AT91_CAST(AT91PS_ADC) 0xFFFD8000) // (ADC) Base Address + +// ***************************************************************************** +// MEMORY MAPPING DEFINITIONS FOR AT91SAM7X256 +// ***************************************************************************** +// ISRAM +#define AT91C_ISRAM (0x00200000) // Internal SRAM base address +#define AT91C_ISRAM_SIZE (0x00010000) // Internal SRAM size in byte (64 Kbytes) +// IFLASH +#define AT91C_IFLASH (0x00100000) // Internal FLASH base address +#define AT91C_IFLASH_SIZE (0x00040000) // Internal FLASH size in byte (256 Kbytes) +#define AT91C_IFLASH_PAGE_SIZE (256) // Internal FLASH Page Size: 256 bytes +#define AT91C_IFLASH_LOCK_REGION_SIZE (16384) // Internal FLASH Lock Region Size: 16 Kbytes +#define AT91C_IFLASH_NB_OF_PAGES (1024) // Internal FLASH Number of Pages: 1024 bytes +#define AT91C_IFLASH_NB_OF_LOCK_BITS (16) // Internal FLASH Number of Lock Bits: 16 bytes + +#endif diff --git a/demos/ARM7-AT91SAM7X-GCC/board.c b/demos/ARM7-AT91SAM7X-GCC/board.c new file mode 100644 index 000000000..2ebad09e2 --- /dev/null +++ b/demos/ARM7-AT91SAM7X-GCC/board.c @@ -0,0 +1,25 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +#include + +#include "at91lib/AT91SAM7X256.h" + +void hwinit(void) { +} diff --git a/demos/ARM7-AT91SAM7X-GCC/board.h b/demos/ARM7-AT91SAM7X-GCC/board.h new file mode 100644 index 000000000..e6b529df6 --- /dev/null +++ b/demos/ARM7-AT91SAM7X-GCC/board.h @@ -0,0 +1,26 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +#define BOARD_OLIMEX_SAM7_EX256 + + +#endif /* _BOARD_H_ */ diff --git a/demos/ARM7-AT91SAM7X-GCC/ch.ld b/demos/ARM7-AT91SAM7X-GCC/ch.ld new file mode 100644 index 000000000..10ce4b2f5 --- /dev/null +++ b/demos/ARM7-AT91SAM7X-GCC/ch.ld @@ -0,0 +1,87 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +/* + * AT91SAM7X256 memory setup. + */ +__und_stack_size__ = 0x0004; +__abt_stack_size__ = 0x0004; +__fiq_stack_size__ = 0x0010; +__irq_stack_size__ = 0x0080; +__svc_stack_size__ = 0x0004; +__sys_stack_size__ = 0x0100; +__stacks_total_size__ = __und_stack_size__ + __abt_stack_size__ + __fiq_stack_size__ + __irq_stack_size__ + __svc_stack_size__ + __sys_stack_size__; + +MEMORY +{ + flash : org = 0x100000, len = 256k + ram : org = 0x200000, len = 64k +} + +__ram_start__ = ORIGIN(ram); +__ram_size__ = LENGTH(ram); +__ram_end__ = __ram_start__ + __ram_size__; +__dma_start__ = 0x7FD00000; +__dma_size__ = 8k; +__dma_end__ = 0x7FD00000 + __dma_size__; + +SECTIONS +{ + . = 0; + + .text : + { + _text = .; + *(.text); + *(.rodata); + *(.rodata*); + *(.glue_7t); + *(.glue_7); + . = ALIGN(4); + _etext = .; + } > flash + + _textdata = _etext; + + .data : + { + _data = .; + *(.data) + . = ALIGN(4); + *(.ramtext) + . = ALIGN(4); + _edata = .; + } > ram AT > flash + + .bss : + { + _bss_start = .; + *(.bss) + . = ALIGN(4); + *(COMMON) + . = ALIGN(4); + _bss_end = .; + } > ram +} + +PROVIDE(end = .); +_end = .; + +__heap_base__ = _end; +__heap_end__ = __ram_end__ - __stacks_total_size__; diff --git a/demos/ARM7-AT91SAM7X-GCC/chconf.h b/demos/ARM7-AT91SAM7X-GCC/chconf.h new file mode 100644 index 000000000..c8817f85c --- /dev/null +++ b/demos/ARM7-AT91SAM7X-GCC/chconf.h @@ -0,0 +1,169 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +/* + * Configuration file for LPC214x-GCC demo project. + */ + +/** + * @addtogroup Config + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/** Configuration option: if specified then time efficient rather than space + * efficient code is used when two possible implementations exist, note + * that this is not related to the compiler optimization options.*/ +#define CH_OPTIMIZE_SPEED + +/** Configuration option: if specified then the Virtual Timers subsystem is + * included in the kernel.*/ +#define CH_USE_VIRTUAL_TIMERS + +/** Configuration option: if specified then the System Timer subsystem is + * included in the kernel.*/ +#define CH_USE_SYSTEMTIME + +/** Configuration option: if specified then the \p chThdSleep() function is + * included in the kernel. + * @note requires \p CH_USE_VIRTUAL_TIMERS.*/ +#define CH_USE_SLEEP + +/** Configuration option: if specified then the \p chThdResume() + * function is included in the kernel.*/ +#define CH_USE_RESUME + +/** Configuration option: if specified then the \p chThdSuspend() + * function is included in the kernel.*/ +#define CH_USE_SUSPEND + +/** Configuration option: if specified then the \p chThdTerminate() + * and \p chThdShouldTerminate() functions are included in the kernel.*/ +#define CH_USE_TERMINATE + +/** Configuration option: if specified then the \p chThdWait() function + * is included in the kernel.*/ +#define CH_USE_WAITEXIT + +/** Configuration option: if specified then the Semaphores APIs are included + * in the kernel.*/ +#define CH_USE_SEMAPHORES + +/** Configuration option: if specified then the Semaphores atomic Signal+Wait + * APIs are included in the kernel.*/ +#define CH_USE_SEMSW + +/** Configuration option: if specified then the Semaphores with timeout APIs + * are included in the kernel. + * @note requires \p CH_USE_SEMAPHORES. + * @note requires \p CH_USE_VIRTUAL_TIMERS.*/ +#define CH_USE_SEMAPHORES_TIMEOUT + +/** Configuration option: if specified then the Mutexes APIs are included in + * the kernel.*/ +#define CH_USE_MUTEXES + +/** Configuration option: if specified then the Events APIs are included in + * the kernel.*/ +#define CH_USE_EVENTS + +/** Configuration option: if specified then the \p chEvtWaitTimeout() + * function is included in the kernel. + * @note requires \p CH_USE_EVENTS. + * @note requires \p CH_USE_VIRTUAL_TIMERS.*/ +#define CH_USE_EVENTS_TIMEOUT + +/** Configuration option: if specified then the Synchronous Messages APIs are + * included in the kernel.*/ +#define CH_USE_MESSAGES + +/** Configuration option: if specified then the \p chMsgSendWithEvent() + * function is included in the kernel. + * @note requires \p CH_USE_MESSAGES. + * @note requires \p CH_USE_VIRTUAL_TIMERS.*/ +#define CH_USE_MESSAGES_EVENT + +/** Configuration option: If enabled then the threads have an option to serve + * messages by priority instead of FIFO order. + * @note requires \p CH_USE_MESSAGES.*/ +//#define CH_USE_MESSAGES_PRIORITY + +/** Configuration option: if specified then the + * \p chThdGetExitEventSource() function is included in the kernel. + * @note requires \p CH_USE_MESSAGES. + * @note requires \p CH_USE_EVENTS.*/ +#define CH_USE_EXIT_EVENT + +/** Configuration option: if specified then the I/O queues APIs are included + * in the kernel.*/ +#define CH_USE_QUEUES + +/** Configuration option: if specified then the halfduplex queue APIs are + * included in the kernel.*/ +#define CH_USE_QUEUES_HALFDUPLEX + +/** Configuration option: if specified then the I/O queues with timeout + * APIs are included in the kernel. + * @note requires \p CH_USE_SEMAPHORES_TIMEOUT.*/ +#define CH_USE_QUEUES_TIMEOUT + +/** Configuration option: if specified then the full duplex serial driver APIs + * are included in the kernel.*/ +#define CH_USE_SERIAL_FULLDUPLEX + +/** Configuration option: if specified then the half duplex serial driver APIs + * are included in the kernel.*/ +#define CH_USE_SERIAL_HALFDUPLEX + +/** Configuration option: Frequency of the system timer that drives the system + * ticks. This also defines the system time unit.*/ +#define CH_FREQUENCY 1000 + +/** Configuration option: This constant is the number of ticks allowed for the + * threads before preemption occurs.*/ +#define CH_TIME_QUANTUM 20 + +/** Configuration option: Defines a CPU register to be used as storage for the + * global \p currp variable. Caching this variable in a register can greatly + * improve both space and time efficiency of the generated code. Another side + * effect is that one less register has to be saved during the context switch + * resulting in lower RAM usage and faster code. + * @note This option is only useable with the GCC compiler and is only useful + * on processors with many registers like ARM cores. + * @note If this option is enabled then ALL the libraries linked to the + * ChibiOS/RT code must be recompiled with the GCC option \p + * -ffixed-. + */ +//#define CH_CURRP_REGISTER_CACHE "r7" + +/** Configuration option: Includes basic debug support to the kernel. + * @note the debug support is port-dependent, it may be not present on some + * targets. In that case stub functions will be included. + */ +//#define CH_USE_DEBUG + +/** Debug option: Includes the threads context switch tracing feature. + */ +//#define CH_USE_TRACE + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/demos/ARM7-AT91SAM7X-GCC/main.c b/demos/ARM7-AT91SAM7X-GCC/main.c new file mode 100644 index 000000000..24c96519f --- /dev/null +++ b/demos/ARM7-AT91SAM7X-GCC/main.c @@ -0,0 +1,39 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +#include + +#include "at91lib/AT91SAM7X256.h" + +/* + * Entry point, the interrupts are disabled on entry. + */ +int main(int argc, char **argv) { + + /* + * The main() function becomes a thread here then the interrupts are + * enabled and ChibiOS/RT goes live. + */ + chSysInit(); + + while (TRUE) + chThdSleep(1000); + + return 0; +} diff --git a/demos/ARM7-AT91SAM7X-GCC/readme.txt b/demos/ARM7-AT91SAM7X-GCC/readme.txt new file mode 100644 index 000000000..5c0317e65 --- /dev/null +++ b/demos/ARM7-AT91SAM7X-GCC/readme.txt @@ -0,0 +1,26 @@ +***************************************************************************** +** ChibiOS/RT port for ARM7TDMI AT91SAM7X256. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an Olimex SAM7-EX256 board. + +** The Demo ** + +The demo blinks the leds on the board by using multiple threads. + +** Build Procedure ** + +The demo was built using the YAGARTO toolchain but any toolchain based on GCC +and GNU userspace programs will work. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are Atmel copyright +and are licensed under a different license, see the header present in all the +source files under ./demos/AT91SAM7X256/at91lib for details. +Also note that not all the files present in the Atmel library are distribuited +with ChibiOS/RT, you can find the whole library on the Atmel web site: + + http://www.atmel.com diff --git a/ports/ARM7-AT91SAM7X/GCC/chcore.c b/ports/ARM7-AT91SAM7X/GCC/chcore.c new file mode 100644 index 000000000..795fcd792 --- /dev/null +++ b/ports/ARM7-AT91SAM7X/GCC/chcore.c @@ -0,0 +1,235 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +#include + +#include "at91lib/AT91SAM7X256.h" + +/* + * System idle thread loop. + */ +void _IdleThread(void *p) { + + while (TRUE) { +// Note, it is disabled because it causes trouble with the JTAG probe. +// Enable it in the final code only. +// PCON = 1; + } +} + +/* + * The following functions are present only if there is in the system any + * code compiled as THUMB that may invoke them. + * NOTE: The undefs are there in case this module is compiled in ARM mode but + * there are THUMB modules in the system. + */ +#ifdef THUMB_PRESENT +#undef chSysLock +void chSysLock(void) { + +#ifdef THUMB + asm(".p2align 2,, \n\t" \ + "mov r0, pc \n\t" \ + "bx r0 \n\t" \ + ".code 32 \n\t"); +#endif + + asm("msr CPSR_c, #0x9F \n\t" \ + "bx lr \n\t"); +} + +#undef chSysUnlock +void chSysUnlock(void) { + +#ifdef THUMB + asm(".p2align 2,, \n\t" \ + "mov r0, pc \n\t" \ + "bx r0 \n\t" \ + ".code 32 \n\t"); +#endif + + asm("msr CPSR_c, #0x1F \n\t" \ + "bx lr \n\t"); +} +#endif + +void chSysSwitchI(Thread *otp, Thread *ntp) { + +#ifdef THUMB + asm(".p2align 2,, \n\t" \ + "mov r2, pc \n\t" \ + "bx r2 \n\t" \ + ".code 32 \n\t"); +#endif + +#ifdef CH_CURRP_REGISTER_CACHE + asm("stmfd sp!, {r4, r5, r6, r8, r9, r10, r11, lr} \n\t" \ + "str sp, [r0, #16] \n\t" \ + "ldr sp, [r1, #16] \n\t"); +#ifdef THUMB_PRESENT + asm("ldmfd sp!, {r4, r5, r6, r8, r9, r10, r11, lr} \n\t" \ + "bx lr \n\t"); +#else /* !THUMB_PRESENT */ + asm("ldmfd sp!, {r4, r5, r6, r8, r9, r10, r11, pc} \n\t"); +#endif /* !THUMB_PRESENT */ +#else /* !CH_CURRP_REGISTER_CACHE */ + asm("stmfd sp!, {r4, r5, r6, r7, r8, r9, r10, r11, lr} \n\t" \ + "str sp, [r0, #16] \n\t" \ + "ldr sp, [r1, #16] \n\t"); +#ifdef THUMB_PRESENT + asm("ldmfd sp!, {r4, r5, r6, r7, r8, r9, r10, r11, lr} \n\t" \ + "bx lr \n\t"); +#else /* !THUMB_PRESENT */ + asm("ldmfd sp!, {r4, r5, r6, r7, r8, r9, r10, r11, pc} \n\t"); +#endif /* !THUMB_PRESENT */ +#endif /* !CH_CURRP_REGISTER_CACHE */ +} + +/* + * System console message (not implemented). + */ +void chSysPuts(char *msg) { +} + +/* + * Common IRQ exit code, \p chSysIRQExitI() just jumps here. + * + * System stack frame structure after a context switch in the + * interrupt handler: + * + * High +------------+ + * | LR_USR | -+ + * | R12 | | + * | R3 | | + * | R2 | | External context: IRQ handler frame + * | R1 | | + * | R0 | | + * | LR_IRQ | | (user code return address) + * | SPSR | -+ (user code status) + * | .... | <- chSchDoRescheduleI() stack frame, optimize it for space + * | LR | -+ (system code return address) + * | R11 | | + * | R10 | | + * | R9 | | + * | R8 | | Internal context: chSysSwitchI() frame + * | (R7) | | (optional, see CH_CURRP_REGISTER_CACHE) + * | R6 | | + * | R5 | | + * SP-> | R4 | -+ + * Low +------------+ + */ +__attribute__((naked, weak)) +void IrqCommon(void) { + register BOOL b asm("r0"); + +// VICVectAddr = 0; + b = chSchRescRequiredI(); +#ifdef THUMB + asm(".p2align 2,, \n\t" \ + "mov lr, pc \n\t" \ + "bx lr \n\t" \ + ".code 32 \n\t"); +#endif + /* + * If a reschedulation is not required then just returns from the IRQ. + */ + asm("cmp r0, #0 \n\t" \ + "ldmeqfd sp!, {r0-r3, r12, lr} \n\t" \ + "subeqs pc, lr, #4 \n\t"); + /* + * Reschedulation required, saves the external context on the + * system/user stack and empties the IRQ stack. + */ + asm(".set MODE_IRQ, 0x12 \n\t" \ + ".set MODE_SYS, 0x1F \n\t" \ + ".set F_BIT, 0x40 \n\t" \ + ".set I_BIT, 0x80 \n\t" \ + "ldmfd sp!, {r0-r3, r12, lr} \n\t" \ + "msr CPSR_c, #MODE_SYS | I_BIT \n\t" \ + "stmfd sp!, {r0-r3, r12, lr} \n\t" \ + "msr CPSR_c, #MODE_IRQ | I_BIT \n\t" \ + "mrs r0, SPSR \n\t" \ + "mov r1, lr \n\t" \ + "msr CPSR_c, #MODE_SYS | I_BIT \n\t" \ + "stmfd sp!, {r0, r1} \n\t"); + +#ifdef THUMB_NO_INTERWORKING + asm("add r0, pc, #1 \n\t" \ + "bx r0 \n\t" \ + ".code 16 \n\t" \ + "bl chSchDoRescheduleI \n\t" \ + ".p2align 2,, \n\t" \ + "mov lr, pc \n\t" \ + "bx lr \n\t" \ + ".code 32 \n\t"); +#else + asm("bl chSchDoRescheduleI \n\t"); +#endif + + /* + * Restores the external context. + */ + asm("ldmfd sp!, {r0, r1} \n\t" \ + "msr CPSR_c, #MODE_IRQ | I_BIT \n\t" \ + "msr SPSR_fsxc, r0 \n\t" \ + "mov lr, r1 \n\t" \ + "msr CPSR_c, #MODE_SYS | I_BIT \n\t" \ + "ldmfd sp!, {r0-r3, r12, lr} \n\t" \ + "msr CPSR_c, #MODE_IRQ | I_BIT \n\t" \ + "subs pc, lr, #4 \n\t"); + + /* + * Threads entry/exit code. It is declared weak so you can easily replace it. + * NOTE: It is always invoked in ARM mode, it does the mode switching. + * NOTE: It is included into IrqCommon to make sure the symbol refers to + * 32 bit code. + */ + asm(".weak threadstart \n\t" \ + ".globl threadstart \n\t" \ + "threadstart: \n\t" \ + "msr CPSR_c, #MODE_SYS \n\t"); +#ifndef THUMB_NO_INTERWORKING + asm("mov r0, r5 \n\t" \ + "mov lr, pc \n\t" \ + "bx r4 \n\t" \ + "bl chThdExit \n\t"); +#else + asm("add r0, pc, #1 \n\t" \ + "bx r0 \n\t" \ + ".code 16 \n\t" \ + "mov r0, r5 \n\t" \ + "bl jmpr4 \n\t" \ + "bl chThdExit \n\t" \ + "jmpr4: \n\t" \ + "bx r4 \n\t"); +#endif +} + +/* + * System halt. + */ +__attribute__((naked, weak)) +void chSysHalt(void) { + +#ifdef THUMB + asm("ldr r0, =_halt32 \n\t" \ + "bx r0 \n\t"); +#endif + asm("b _halt32 \n\t"); +} diff --git a/ports/ARM7-AT91SAM7X/GCC/chcore.h b/ports/ARM7-AT91SAM7X/GCC/chcore.h new file mode 100644 index 000000000..75392b6b9 --- /dev/null +++ b/ports/ARM7-AT91SAM7X/GCC/chcore.h @@ -0,0 +1,129 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +#ifndef _CHCORE_H_ +#define _CHCORE_H_ + +typedef void *regarm; + +/* + * Interrupt saved context. + */ +struct extctx { + regarm spsr_irq; + regarm lr_irq; + regarm r0; + regarm r1; + regarm r2; + regarm r3; + regarm r12; +}; + +/* + * System saved context. + */ +struct intctx { + regarm r4; + regarm r5; + regarm r6; +#ifndef CH_CURRP_REGISTER_CACHE + regarm r7; +#endif + regarm r8; + regarm r9; + regarm r10; + regarm r11; + regarm lr; +}; + +/* + * Port dependent part of the Thread structure, you may add fields in + * this structure. + */ +typedef struct { + struct intctx *r13; +} Context; + +/* + * Platform dependent part of the \p chThdCreate() API. + */ +#define SETUP_CONTEXT(workspace, wsize, pf, arg) { \ + tp->p_ctx.r13 = (struct intctx *)((BYTE8 *)workspace + \ + wsize - \ + sizeof(struct intctx)); \ + tp->p_ctx.r13->r4 = pf; \ + tp->p_ctx.r13->r5 = arg; \ + tp->p_ctx.r13->lr = threadstart; \ +} + +#ifdef THUMB +extern void chSysLock(void); +extern void chSysUnlock(void); +#else /* !THUMB */ +#define chSysLock() asm("msr CPSR_c, #0x9F") +#define chSysUnlock() asm("msr CPSR_c, #0x1F") +#endif /* THUMB */ + +#ifdef THUMB +#define INT_REQUIRED_STACK 0x10 +#else /* !THUMB */ +#define INT_REQUIRED_STACK 0 +#endif /* !THUMB */ +#define StackAlign(n) ((((n) - 1) | 3) + 1) +#define UserStackSize(n) StackAlign(sizeof(Thread) + \ + sizeof(struct intctx) + \ + sizeof(struct extctx) + \ + (n) + \ + INT_REQUIRED_STACK) +#define WorkingArea(s, n) ULONG32 s[UserStackSize(n) >> 2]; + +#ifdef THUMB +#define chSysIRQEnterI() { \ + asm(".code 32 \n\t" \ + "stmfd sp!, {r0-r3, r12, lr} \n\t" \ + "add r0, pc, #1 \n\t" \ + "bx r0 \n\t" \ + ".code 16 \n\t"); \ +} + +#define chSysIRQExitI() { \ + VICVectAddr = 0; \ + asm("ldr r0, =IrqCommon \n\t" \ + "bx r0 \n\t"); \ +} +#else /* !THUMB */ +#define chSysIRQEnterI() { \ + asm("stmfd sp!, {r0-r3, r12, lr} \n\t"); \ +} + +#define chSysIRQExitI() { \ + asm("b IrqCommon \n\t"); \ +} +#endif /* !THUMB */ + +/* It requires zero bytes, but better be safe.*/ +#define IDLE_THREAD_STACK_SIZE 8 +void _IdleThread(void *p) __attribute__((noreturn)); + +void chSysHalt(void); +void chSysSwitchI(Thread *otp, Thread *ntp); +void chSysPuts(char *msg); +void threadstart(void); + +#endif /* _CHCORE_H_ */ diff --git a/ports/ARM7-AT91SAM7X/GCC/chtypes.h b/ports/ARM7-AT91SAM7X/GCC/chtypes.h new file mode 100644 index 000000000..2ac219148 --- /dev/null +++ b/ports/ARM7-AT91SAM7X/GCC/chtypes.h @@ -0,0 +1,47 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +#ifndef _CHTYPES_H_ +#define _CHTYPES_H_ + +/* + * Generic types often dependant on the compiler. + */ +#define BOOL char +#define BYTE8 unsigned char +#define SBYTE8 char +#define WORD16 short +#define UWORD16 unsigned short +#define LONG32 int +#define ULONG32 unsigned int + +typedef BYTE8 t_tmode; +typedef BYTE8 t_tstate; +typedef UWORD16 t_tid; +typedef ULONG32 t_prio; +typedef LONG32 t_msg; +typedef LONG32 t_eventid; +typedef ULONG32 t_eventmask; +typedef ULONG32 t_time; +typedef LONG32 t_cnt; +typedef ULONG32 t_size; + +#define INLINE inline + +#endif /* _CHTYPES_H_ */ diff --git a/ports/ARM7-AT91SAM7X/GCC/crt0.s b/ports/ARM7-AT91SAM7X/GCC/crt0.s new file mode 100644 index 000000000..d501770c8 --- /dev/null +++ b/ports/ARM7-AT91SAM7X/GCC/crt0.s @@ -0,0 +1,178 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +/* + * Generic ARM startup file for ChibiOS/RT. + */ + +.extern _main + +.set MODE_USR, 0x10 +.set MODE_FIQ, 0x11 +.set MODE_IRQ, 0x12 +.set MODE_SVC, 0x13 +.set MODE_ABT, 0x17 +.set MODE_UND, 0x1B +.set MODE_SYS, 0x1F + +.equ I_BIT, 0x80 +.equ F_BIT, 0x40 + +.text +.code 32 +.balign 4 +/* + * System entry points. + */ +_start: + b ResetHandler + ldr pc, _undefined + ldr pc, _swi + ldr pc, _prefetch + ldr pc, _abort + nop + ldr pc, [pc,#-0xFF0] /* VIC - IRQ Vector Register */ + ldr pc, _fiq + +_undefined: + .word UndHandler +_swi: + .word SwiHandler +_prefetch: + .word PrefetchHandler +_abort: + .word AbortHandler +_fiq: + .word FiqHandler + .word 0 + .word 0 + .word 0 + +/* + * Reset handler. + */ +ResetHandler: + /* + * Stack pointers initialization. + */ + ldr r0, =__ram_end__ + /* Undefined */ + msr CPSR_c, #MODE_UND | I_BIT | F_BIT + mov sp, r0 + ldr r1, =__und_stack_size__ + sub r0, r0, r1 + /* Abort */ + msr CPSR_c, #MODE_ABT | I_BIT | F_BIT + mov sp, r0 + ldr r1, =__abt_stack_size__ + sub r0, r0, r1 + /* FIQ */ + msr CPSR_c, #MODE_FIQ | I_BIT | F_BIT + mov sp, r0 + ldr r1, =__fiq_stack_size__ + sub r0, r0, r1 + /* IRQ */ + msr CPSR_c, #MODE_IRQ | I_BIT | F_BIT + mov sp, r0 + ldr r1, =__irq_stack_size__ + sub r0, r0, r1 + /* Supervisor */ + msr CPSR_c, #MODE_SVC | I_BIT | F_BIT + mov sp, r0 + ldr r1, =__svc_stack_size__ + sub r0, r0, r1 + /* System */ + msr CPSR_c, #MODE_SYS | I_BIT | F_BIT + mov sp, r0 +// ldr r1, =__sys_stack_size__ +// sub r0, r0, r1 + /* + * Data initialization. + * NOTE: It assumes that the DATA size is a multiple of 4. + */ + ldr r1, =_textdata + ldr r2, =_data + ldr r3, =_edata +dataloop: + cmp r2, r3 + ldrlo r0, [r1], #4 + strlo r0, [r2], #4 + blo dataloop + /* + * BSS initialization. + * NOTE: It assumes that the BSS size is a multiple of 4. + */ + mov r0, #0 + ldr r1, =_bss_start + ldr r2, =_bss_end +bssloop: + cmp r1, r2 + strlo r0, [r1], #4 + blo bssloop + /* + * Application-provided HW initialization routine. + */ +#ifndef THUMB_NO_INTERWORKING + bl hwinit + /* + * main(0, NULL). + */ + mov r0, #0 + mov r1, r0 + bl main + bl chSysHalt +#else + add r0, pc, #1 + bx r0 +.code 16 + bl hwinit + mov r0, #0 + mov r1, r0 + bl main + bl chSysHalt +.code 32 +#endif + +.weak UndHandler +.globl UndHandler +UndHandler: + +.weak SwiHandler +.globl SwiHandler +SwiHandler: + +.weak PrefetchHandler +.globl PrefetchHandler +PrefetchHandler: + +.weak AbortHandler +.globl AbortHandler +AbortHandler: + +.weak FiqHandler +.globl FiqHandler +FiqHandler: + +.weak _halt32 +.globl _halt32 +_halt32: + mrs r0, CPSR + orr r0, #I_BIT | F_BIT + msr CPSR_c, r0 +.loop: b .loop diff --git a/readme.txt b/readme.txt index 7b305facb..4867705e2 100644 --- a/readme.txt +++ b/readme.txt @@ -39,6 +39,9 @@ AVR-AT90CANx-GCC - Port on AVR AT90CAN128, not complete yet. *** Releases *** ***************************************************************************** +*** 0.5.4 *** +- Begun the work for the port on Atmel AT91SAM7X256 (and similar models). + *** 0.5.3 *** - Removed the chMsgSendTimeout() API, it was conceptually flawed because, after sending a message, the sender *has* to wait for the answer or