diff --git a/os/io/platforms/STM32F103/pal_lld.c b/os/io/platforms/STM32F103/pal_lld.c deleted file mode 100644 index c50efadc0..000000000 --- a/os/io/platforms/STM32F103/pal_lld.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio. - - This file is part of ChibiOS/RT. - - ChibiOS/RT is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - ChibiOS/RT is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/** - * @file STM32F103/pal_lld.c - * @brief STM32 GPIO low level driver code - * @addtogroup STM32F103_PAL - * @{ - */ - -#include -#include - -#if defined(STM32F10X_LD) -#define APB2_RST_MASK (RCC_APB2RSTR_IOPARST | RCC_APB2RSTR_IOPBRST | \ - RCC_APB2RSTR_IOPCRST | RCC_APB2RSTR_IOPDRST | \ - RCC_APB2RSTR_AFIORST) -#define APB2_EN_MASK (RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN | \ - RCC_APB2ENR_IOPCEN | RCC_APB2ENR_IOPDEN | \ - RCC_APB2ENR_AFIOEN) -#elif defined(STM32F10X_HD) -#define APB2_RST_MASK (RCC_APB2RSTR_IOPARST | RCC_APB2RSTR_IOPBRST | \ - RCC_APB2RSTR_IOPCRST | RCC_APB2RSTR_IOPDRST | \ - RCC_APB2RSTR_IOPERST | RCC_APB2RSTR_IOPFRST | \ - RCC_APB2RSTR_IOPGRST | RCC_APB2RSTR_AFIORST); -#define APB2_EN_MASK (RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN | \ - RCC_APB2ENR_IOPCEN | RCC_APB2ENR_IOPDEN | \ - RCC_APB2ENR_IOPEEN | RCC_APB2ENR_IOPFEN | \ - RCC_APB2ENR_IOPGEN | RCC_APB2ENR_AFIOEN) -#else - /* Defaults on Medium Density devices.*/ -#define APB2_RST_MASK (RCC_APB2RSTR_IOPARST | RCC_APB2RSTR_IOPBRST | \ - RCC_APB2RSTR_IOPCRST | RCC_APB2RSTR_IOPDRST | \ - RCC_APB2RSTR_IOPERST | RCC_APB2RSTR_AFIORST); -#define APB2_EN_MASK (RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN | \ - RCC_APB2ENR_IOPCEN | RCC_APB2ENR_IOPDEN | \ - RCC_APB2ENR_IOPEEN | RCC_APB2ENR_AFIOEN) -#endif - -/** - * @brief STM32 I/O ports configuration. - * @details Ports A-D(E, F, G) clocks enabled, AFIO clock enabled. - * - * @param[in] config the STM32 ports configuration - */ -void _pal_lld_init(const STM32GPIOConfig *config) { - - /* - * Enables the GPIO related clocks. - */ - RCC->APB2ENR |= APB2_EN_MASK; - - /* - * Resets the GPIO ports and AFIO. - */ - RCC->APB2RSTR = APB2_RST_MASK; - RCC->APB2RSTR = 0; - - IOPORT1->ODR = config->PAData.odr; - IOPORT1->CRH = config->PAData.crh; - IOPORT1->CRL = config->PAData.crl; - IOPORT2->ODR = config->PBData.odr; - IOPORT2->CRH = config->PBData.crh; - IOPORT2->CRL = config->PBData.crl; - IOPORT3->ODR = config->PCData.odr; - IOPORT3->CRH = config->PCData.crh; - IOPORT3->CRL = config->PCData.crl; - IOPORT4->ODR = config->PDData.odr; - IOPORT4->CRH = config->PDData.crh; - IOPORT4->CRL = config->PDData.crl; -#if !defined(STM32F10X_LD) || defined(__DOXYGEN__) - IOPORT5->ODR = config->PEData.odr; - IOPORT5->CRH = config->PEData.crh; - IOPORT5->CRL = config->PEData.crl; -#endif -#if defined(STM32F10X_HD) || defined(__DOXYGEN__) - IOPORT6->ODR = config->PFData.odr; - IOPORT6->CRH = config->PFData.crh; - IOPORT6->CRL = config->PFData.crl; - IOPORT7->ODR = config->PGData.odr; - IOPORT7->CRH = config->PGData.crh; - IOPORT7->CRL = config->PGData.crl; -#endif -} - -/** - * @brief Pads mode setup. - * @details This function programs a pads group belonging to the same port - * with the specified mode. - * - * @param[in] port the port identifier - * @param[in] mask the group mask - * @param[in] mode the mode - * - * @note This function is not meant to be invoked directly by the application - * code. - * @note @p PAL_MODE_UNCONNECTED is implemented as push pull output at 2MHz. - * @note Writing on pads programmed as pull-up or pull-down has the side - * effect to modify the resistor setting because the output latched data - * is used for the resistor selection. - */ -void _pal_lld_setgroupmode(ioportid_t port, - ioportmask_t mask, - uint_fast8_t mode) { - static const uint8_t cfgtab[] = { - 4, /* PAL_MODE_RESET, implemented as input.*/ - 2, /* PAL_MODE_UNCONNECTED, implemented as push pull output 2MHz.*/ - 4, /* PAL_MODE_INPUT */ - 8, /* PAL_MODE_INPUT_PULLUP */ - 8, /* PAL_MODE_INPUT_PULLDOWN */ - 3, /* PAL_MODE_OUTPUT_PUSHPULL, 50MHz.*/ - 7, /* PAL_MODE_OUTPUT_OPENDRAIN, 50MHz.*/ - }; - uint32_t mh, ml, crh, crl, cfg; - unsigned i; - - if (mode == PAL_MODE_INPUT_PULLUP) - port->BSRR = mask; - else if (mode == PAL_MODE_INPUT_PULLDOWN) - port->BRR = mask; - cfg = cfgtab[mode]; - mh = ml = crh = crl = 0; - for (i = 0; i < 8; i++) { - ml <<= 4; - mh <<= 4; - crl <<= 4; - crh <<= 4; - if ((mask & 1) == 0) - ml |= 0xf; - else - crl |= cfg; - if ((mask & 0x10000) == 0) - mh |= 0xf; - else - crh |= cfg; - mask >>= 1; - } - port->CRH = (port->CRH & mh) | crh; - port->CRL = (port->CRL & ml) | crl; -} - -/** @} */ diff --git a/os/io/platforms/STM32F103/pal_lld.h b/os/io/platforms/STM32F103/pal_lld.h deleted file mode 100644 index c1c65f85f..000000000 --- a/os/io/platforms/STM32F103/pal_lld.h +++ /dev/null @@ -1,307 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio. - - This file is part of ChibiOS/RT. - - ChibiOS/RT is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - ChibiOS/RT is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/** - * @file STM32F103/pal_lld.h - * @brief STM32 GPIO low level driver header - * @addtogroup STM32F103_PAL - * @{ - */ - -#ifndef _PAL_LLD_H_ -#define _PAL_LLD_H_ - -/* - * Tricks required to make the TRUE/FALSE declaration inside the library - * compatible. - */ -#ifndef __STM32F10x_H -#undef FALSE -#undef TRUE -#include -#define FALSE 0 -#define TRUE (!FALSE) -#endif - -/*===========================================================================*/ -/* I/O Ports Types and constants. */ -/*===========================================================================*/ - -/** - * @brief GPIO port setup info. - */ -typedef struct { - /** Initial value for ODR register.*/ - uint32_t odr; - /** Initial value for CRL register.*/ - uint32_t crl; - /** Initial value for CRH register.*/ - uint32_t crh; -} stm32_gpio_setup_t; - -/** - * @brief STM32 GPIO static initializer. - * @details An instance of this structure must be passed to @p palInit() at - * system startup time in order to initialized the digital I/O - * subsystem. This represents only the initial setup, specific pads - * or whole ports can be reprogrammed at later time. - */ -typedef struct { - /** @brief Port A setup data.*/ - stm32_gpio_setup_t PAData; - /** @brief Port B setup data.*/ - stm32_gpio_setup_t PBData; - /** @brief Port C setup data.*/ - stm32_gpio_setup_t PCData; - /** @brief Port D setup data.*/ - stm32_gpio_setup_t PDData; -#if !defined(STM32F10X_LD) || defined(__DOXYGEN__) - /** @brief Port E setup data.*/ - stm32_gpio_setup_t PEData; -#endif -#if defined(STM32F10X_HD) || defined(__DOXYGEN__) - /** @brief Port F setup data.*/ - stm32_gpio_setup_t PFData; - /** @brief Port G setup data.*/ - stm32_gpio_setup_t PGData; -#endif -} STM32GPIOConfig; - -/** - * @brief Width, in bits, of an I/O port. - */ -#define PAL_IOPORTS_WIDTH 16 - -/** - * @brief Whole port mask. - * @brief This macro specifies all the valid bits into a port. - */ -#define PAL_WHOLE_PORT ((ioportmask_t)0xFFFF) - -/** - * @brief Digital I/O port sized unsigned type. - */ -typedef uint32_t ioportmask_t; - -/** - * @brief Port Identifier. - * @details This type can be a scalar or some kind of pointer, do not make - * any assumption about it, use the provided macros when populating - * variables of this type. - */ -typedef GPIO_TypeDef * ioportid_t; - -/*===========================================================================*/ -/* I/O Ports Identifiers. */ -/* The low level driver wraps the definitions already present in the STM32 */ -/* firmware library. */ -/*===========================================================================*/ - -/** - * @brief GPIO port A identifier. - */ -#define IOPORT1 GPIOA - -/** - * @brief GPIO port B identifier. - */ -#define IOPORT2 GPIOB - -/** - * @brief GPIO port C identifier. - */ -#define IOPORT3 GPIOC - -/** - * @brief GPIO port D identifier. - */ -#define IOPORT4 GPIOD - -/** - * @brief GPIO port E identifier. - */ -#if !defined(STM32F10X_LD) || defined(__DOXYGEN__) -#define IOPORT5 GPIOE -#endif - -/** - * @brief GPIO port F identifier. - */ -#if defined(STM32F10X_HD) || defined(__DOXYGEN__) -#define IOPORT6 GPIOF - -/** - * @brief GPIO port G identifier. - */ -#define IOPORT7 GPIOG -#endif - -/*===========================================================================*/ -/* Implementation, some of the following macros could be implemented as */ -/* functions, please put them in a file named ioports_lld.c if so. */ -/*===========================================================================*/ - -/** - * @brief GPIO ports subsystem initialization. - */ -#define pal_lld_init(config) _pal_lld_init(config) - -/** - * @brief Reads an I/O port. - * @details This function is implemented by reading the GPIO IDR register, the - * implementation has no side effects. - * - * @param[in] port the port identifier - * @return the port bits - * - * @note This function is not meant to be invoked directly by the application - * code. - */ -#define pal_lld_readport(port) ((port)->IDR) - -/** - * @brief Reads the output latch. - * @details This function is implemented by reading the GPIO ODR register, the - * implementation has no side effects. - * - * @param[in] port the port identifier - * @return The latched logical states. - * - * @note This function is not meant to be invoked directly by the application - * code. - */ -#define pal_lld_readlatch(port) ((port)->ODR) - -/** - * @brief Writes on a I/O port. - * @details This function is implemented by writing the GPIO ODR register, the - * implementation has no side effects. - * - * @param[in] port the port identifier - * @param[in] bits the bits to be written on the specified port - * - * @note This function is not meant to be invoked directly by the application - * code. - * @note Writing on pads programmed as pull-up or pull-down has the side - * effect to modify the resistor setting because the output latched data - * is used for the resistor selection. - */ -#define pal_lld_writeport(port, bits) ((port)->ODR = (bits)) - -/** - * @brief Sets a bits mask on a I/O port. - * @details This function is implemented by writing the GPIO BSRR register, the - * implementation has no side effects. - * - * @param[in] port the port identifier - * @param[in] bits the bits to be ORed on the specified port - * - * @note This function is not meant to be invoked directly by the application - * code. - * @note Writing on pads programmed as pull-up or pull-down has the side - * effect to modify the resistor setting because the output latched data - * is used for the resistor selection. - */ -#define pal_lld_setport(port, bits) ((port)->BSRR = (bits)) - -/** - * @brief Clears a bits mask on a I/O port. - * @details This function is implemented by writing the GPIO BRR register, the - * implementation has no side effects. - * - * @param[in] port the port identifier - * @param[in] bits the bits to be cleared on the specified port - * - * @note This function is not meant to be invoked directly by the application - * code. - * @note Writing on pads programmed as pull-up or pull-down has the side - * effect to modify the resistor setting because the output latched data - * is used for the resistor selection. - */ -#define pal_lld_clearport(port, bits) ((port)->BRR = (bits)) - -/** - * @brief Writes a group of bits. - * @details This function is implemented by writing the GPIO BSRR register, the - * implementation has no side effects. - * - * @param[in] port the port identifier - * @param[in] mask the group mask - * @param[in] offset the group bit offset within the port - * @param[in] bits the bits to be written. Values exceeding the group width - * are masked. - * - * @note This function is not meant to be invoked directly by the application - * code. - * @note Writing on pads programmed as pull-up or pull-down has the side - * effect to modify the resistor setting because the output latched data - * is used for the resistor selection. - */ -#define pal_lld_writegroup(port, mask, offset, bits) { \ - (port)->BSRR = ((~(bits) & (mask)) << (16 + (offset))) | \ - (((bits) & (mask)) << (offset)); \ -} - -/** - * @brief Pads group mode setup. - * @details This function programs a pads group belonging to the same port - * with the specified mode. - * - * @param[in] port the port identifier - * @param[in] mask the group mask - * @param[in] mode the mode - * - * @note This function is not meant to be invoked directly by the application - * code. - * @note Writing on pads programmed as pull-up or pull-down has the side - * effect to modify the resistor setting because the output latched data - * is used for the resistor selection. - */ -#define pal_lld_setgroupmode(port, mask, mode) \ - _pal_lld_setgroupmode(port, mask, mode) - -/** - * @brief Writes a logical state on an output pad. - * - * @param[in] port the port identifier - * @param[in] pad the pad number within the port - * @param[out] bit the logical value, the value must be @p 0 or @p 1 - * - * @note This function is not meant to be invoked directly by the application - * code. - * @note Writing on pads programmed as pull-up or pull-down has the side - * effect to modify the resistor setting because the output latched data - * is used for the resistor selection. - */ -#define pal_lld_writepad(port, pad, bit) pal_lld_writegroup(port, 1, pad, bit) - -#ifdef __cplusplus -extern "C" { -#endif - void _pal_lld_init(const STM32GPIOConfig *config); - void _pal_lld_setgroupmode(ioportid_t port, - ioportmask_t mask, - uint_fast8_t mode); -#ifdef __cplusplus -} -#endif - -#endif /* _PAL_LLD_H_ */ - -/** @} */ diff --git a/os/io/platforms/STM32F103/platform.dox b/os/io/platforms/STM32F103/platform.dox deleted file mode 100644 index 6ec9fbe20..000000000 --- a/os/io/platforms/STM32F103/platform.dox +++ /dev/null @@ -1,72 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio. - - This file is part of ChibiOS/RT. - - ChibiOS/RT is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - ChibiOS/RT is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/** - * @defgroup STM32 STM32 Support - * @brief STM32 specific support. - * @details The STM32 support includes: - * - I/O ports driver. - * - Buffered, interrupt driven, serial driver. - * - A demo supporting the kernel test suite. - * . - * @ingroup ARMCM3 - */ - -/** - * @defgroup STM32_PAL STM32 I/O Ports Support - * @brief I/O Ports peripherals support. - * @details This module supports the STM3 GPIO controller. The controller - * supports the following features (see @ref PAL): - * - 16 bits wide ports. - * - Atomic set/reset functions. - * - Atomic set+reset function (atomic bus operations). - * - Output latched regardless of the pad setting. - * - Direct read of input pads regardless of the pad setting. - * . - *

Supported Setup Modes

- * - @p PAL_MODE_RESET. - * - @p PAL_MODE_UNCONNECTED. - * - @p PAL_MODE_INPUT. - * - @p PAL_MODE_INPUT_PULLUP. - * - @p PAL_MODE_INPUT_PULLDOWN. - * - @p PAL_MODE_OUTPUT_PUSHPULL. - * - @p PAL_MODE_OUTPUT_OPENDRAIN. - * . - * Any attempt to setup an invalid mode is ignored. - * - *

Suboptimal Behavior

- * Some GPIO features are less than optimal: - * - Pad/port toggling operations are not atomic. - * - Pad/group mode setup is not atomic. - * - Writing on pads/groups/ports programmed as input with pull-up/down - * resistor can change the resistor setting because the output latch is - * used for resistor selection. - * . - * @ingroup STM32 - */ - -/** - * @defgroup STM32_SERIAL STM32 USART Support - * @brief USART peripherals support. - * @details The serial driver supports the STM32 USARTs in asynchronous - * mode. - * - * @ingroup STM32 - */ - \ No newline at end of file diff --git a/os/io/platforms/STM32F103/serial_lld.c b/os/io/platforms/STM32F103/serial_lld.c deleted file mode 100644 index 29a75ac88..000000000 --- a/os/io/platforms/STM32F103/serial_lld.c +++ /dev/null @@ -1,304 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio. - - This file is part of ChibiOS/RT. - - ChibiOS/RT is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - ChibiOS/RT is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/** - * @file STM32/serial_lld.c - * @brief STM32 low level serial driver code - * @addtogroup STM32_SERIAL - * @{ - */ - -#include -#include - -#include "nvic.h" -#include "board.h" - -#if USE_STM32_USART1 || defined(__DOXYGEN__) -/** @brief USART1 serial driver identifier.*/ -SerialDriver SD1; -#endif - -#if USE_STM32_USART2 || defined(__DOXYGEN__) -/** @brief USART2 serial driver identifier.*/ -SerialDriver SD2; -#endif - -#if USE_STM32_USART3 || defined(__DOXYGEN__) -/** @brief USART3 serial driver identifier.*/ -SerialDriver SD3; -#endif - -/** @brief Driver default configuration.*/ -static const SerialDriverConfig default_config = -{ - 38400, - 0, - USART_CR2_STOP1_BITS | USART_CR2_LINEN, - 0 -}; - -/*===========================================================================*/ -/* Low Level Driver local functions. */ -/*===========================================================================*/ - -/** - * @brief USART initialization. - * @details This function must be invoked with interrupts disabled. - * - * @param[in] u pointer to an USART I/O block - * @param[in] config the architecture-dependent serial driver configuration - */ -static void usart_init(USART_TypeDef *u, const SerialDriverConfig *config) { - - /* - * Baud rate setting. - */ - if (u == USART1) - u->BRR = APB2CLK / config->speed; - else - u->BRR = APB1CLK / config->speed; - - /* - * Note that some bits are enforced. - */ - u->CR1 = config->cr1 | USART_CR1_UE | USART_CR1_PEIE | USART_CR1_RXNEIE | - USART_CR1_TE | USART_CR1_RE; - u->CR2 = config->cr2; - u->CR3 = config->cr3 | USART_CR3_EIE; -} - -/** - * @brief USART de-initialization. - * @details This function must be invoked with interrupts disabled. - * - * @param[in] u pointer to an USART I/O block - */ -static void usart_deinit(USART_TypeDef *u) { - - u->CR1 = 0; - u->CR2 = 0; - u->CR3 = 0; -} - -/** - * @brief Error handling routine. - * @param[in] sr USART SR register value - * @param[in] com communication channel associated to the USART - */ -static void set_error(uint16_t sr, SerialDriver *sdp) { - sdflags_t sts = 0; - - if (sr & USART_SR_ORE) - sts |= SD_OVERRUN_ERROR; - if (sr & USART_SR_PE) - sts |= SD_PARITY_ERROR; - if (sr & USART_SR_FE) - sts |= SD_FRAMING_ERROR; - if (sr & USART_SR_LBD) - sts |= SD_BREAK_DETECTED; - chSysLockFromIsr(); - sdAddFlagsI(sdp, sts); - chSysUnlockFromIsr(); -} - -/** - * @brief Common IRQ handler. - * @param[in] u pointer to an USART I/O block - * @param[in] com communication channel associated to the USART - */ -static void serve_interrupt(USART_TypeDef *u, SerialDriver *sdp) { - uint16_t sr = u->SR; - - if (sr & (USART_SR_ORE | USART_SR_FE | USART_SR_PE | USART_SR_LBD)) - set_error(sr, sdp); - if (sr & USART_SR_RXNE) { - chSysLockFromIsr(); - sdIncomingDataI(sdp, u->DR); - chSysUnlockFromIsr(); - } - if (sr & USART_SR_TXE) { - chSysLockFromIsr(); - msg_t b = sdRequestDataI(sdp); - chSysUnlockFromIsr(); - if (b < Q_OK) - u->CR1 &= ~USART_CR1_TXEIE; - else - u->DR = b; - } -} - -#if USE_STM32_USART1 || defined(__DOXYGEN__) -static void notify1(void) { - - USART1->CR1 |= USART_CR1_TXEIE; -} -#endif - -#if USE_STM32_USART2 || defined(__DOXYGEN__) -static void notify2(void) { - - USART2->CR1 |= USART_CR1_TXEIE; -} -#endif - -#if USE_STM32_USART3 || defined(__DOXYGEN__) -static void notify3(void) { - - USART3->CR1 |= USART_CR1_TXEIE; -} -#endif - -/*===========================================================================*/ -/* Low Level Driver interrupt handlers. */ -/*===========================================================================*/ - -#if USE_STM32_USART1 || defined(__DOXYGEN__) -CH_IRQ_HANDLER(VectorD4) { - - CH_IRQ_PROLOGUE(); - - serve_interrupt(USART1, &SD1); - - CH_IRQ_EPILOGUE(); -} -#endif - -#if USE_STM32_USART2 || defined(__DOXYGEN__) -CH_IRQ_HANDLER(VectorD8) { - - CH_IRQ_PROLOGUE(); - - serve_interrupt(USART2, &SD2); - - CH_IRQ_EPILOGUE(); -} -#endif - -#if USE_STM32_USART3 || defined(__DOXYGEN__) -CH_IRQ_HANDLER(VectorDC) { - - CH_IRQ_PROLOGUE(); - - serve_interrupt(USART3, &SD3); - - CH_IRQ_EPILOGUE(); -} -#endif - -/*===========================================================================*/ -/* Low Level Driver exported functions. */ -/*===========================================================================*/ - -/** - * Low level serial driver initialization. - */ -void sd_lld_init(void) { - -#if USE_STM32_USART1 - sdObjectInit(&SD1, NULL, notify1); - GPIOA->CRH = (GPIOA->CRH & 0xFFFFF00F) | 0x000004B0; -#endif - -#if USE_STM32_USART2 - sdObjectInit(&SD2, NULL, notify2); - GPIOA->CRL = (GPIOA->CRL & 0xFFFF00FF) | 0x00004B00; -#endif - -#if USE_STM32_USART3 - sdObjectInit(&SD3, NULL, notify3); - GPIOB->CRH = (GPIOB->CRH & 0xFFFF00FF) | 0x00004B00; -#endif -} - -/** - * @brief Low level serial driver configuration and (re)start. - * - * @param[in] sdp pointer to a @p SerialDriver object - * @param[in] config the architecture-dependent serial driver configuration. - * If this parameter is set to @p NULL then a default - * configuration is used. - */ -void sd_lld_start(SerialDriver *sdp, const SerialDriverConfig *config) { - - if (config == NULL) - config = &default_config; - -#if USE_STM32_USART1 - if (&SD1 == sdp) { - RCC->APB2ENR |= RCC_APB2ENR_USART1EN; - usart_init(USART1, config); - NVICEnableVector(USART1_IRQn, STM32_USART1_PRIORITY); - return; - } -#endif -#if USE_STM32_USART2 - if (&SD2 == sdp) { - RCC->APB1ENR |= RCC_APB1ENR_USART2EN; - usart_init(USART2, config); - NVICEnableVector(USART2_IRQn, STM32_USART2_PRIORITY); - return; - } -#endif -#if USE_STM32_USART3 - if (&SD3 == sdp) { - RCC->APB1ENR |= RCC_APB1ENR_USART3EN; - usart_init(USART3, config); - NVICEnableVector(USART3_IRQn, STM32_USART3_PRIORITY); - return; - } -#endif -} - -/** - * @brief Low level serial driver stop. - * @details De-initializes the USART, stops the associated clock, resets the - * interrupt vector. - * - * @param[in] sdp pointer to a @p SerialDriver object - */ -void sd_lld_stop(SerialDriver *sdp) { - -#if USE_STM32_USART1 - if (&SD1 == sdp) { - usart_deinit(USART1); - RCC->APB2ENR &= ~RCC_APB2ENR_USART1EN; - NVICDisableVector(USART1_IRQn); - return; - } -#endif -#if USE_STM32_USART2 - if (&SD2 == sdp) { - usart_deinit(USART2); - RCC->APB1ENR &= ~RCC_APB1ENR_USART2EN; - NVICDisableVector(USART2_IRQn); - return; - } -#endif -#if USE_STM32_USART3 - if (&SD3 == sdp) { - usart_deinit(USART3); - RCC->APB1ENR &= ~RCC_APB1ENR_USART3EN; - NVICDisableVector(USART3_IRQn); - return; - } -#endif -} - -/** @} */ diff --git a/os/io/platforms/STM32F103/serial_lld.h b/os/io/platforms/STM32F103/serial_lld.h deleted file mode 100644 index ed80f8b5d..000000000 --- a/os/io/platforms/STM32F103/serial_lld.h +++ /dev/null @@ -1,206 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio. - - This file is part of ChibiOS/RT. - - ChibiOS/RT is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - ChibiOS/RT is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/** - * @file STM32/serial_lld.h - * @brief STM32 low level serial driver header - * @addtogroup STM32_SERIAL - * @{ - */ - -#ifndef _SERIAL_LLD_H_ -#define _SERIAL_LLD_H_ - -/* - * Tricks required to make the TRUE/FALSE declaration inside the library - * compatible. - */ -#ifndef __STM32F10x_H -#undef FALSE -#undef TRUE -#include -#define FALSE 0 -#define TRUE (!FALSE) -#endif - -/*===========================================================================*/ -/* Driver pre-compile time settings. */ -/*===========================================================================*/ - -/** - * @brief Serial buffers size setting. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 128 bytes for both the transmission and receive buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 128 -#endif - -/** - * @brief USART1 driver enable switch. - * @details If set to @p TRUE the support for USART1 is included. - * @note The default is @p FALSE. - */ -#if !defined(USE_STM32_USART1) || defined(__DOXYGEN__) -#define USE_STM32_USART1 FALSE -#endif - -/** - * @brief USART2 driver enable switch. - * @details If set to @p TRUE the support for USART2 is included. - * @note The default is @p TRUE. - */ -#if !defined(USE_STM32_USART2) || defined(__DOXYGEN__) -#define USE_STM32_USART2 TRUE -#endif - -/** - * @brief USART3 driver enable switch. - * @details If set to @p TRUE the support for USART3 is included. - * @note The default is @p FALSE. - */ -#if !defined(USE_STM32_USART3) || defined(__DOXYGEN__) -#define USE_STM32_USART3 FALSE -#endif - -/** - * @brief USART1 interrupt priority level setting. - * @note @p BASEPRI_KERNEL >= @p STM32_USART1_PRIORITY > @p PRIORITY_PENDSV. - */ -#if !defined(STM32_USART1_PRIORITY) || defined(__DOXYGEN__) -#define STM32_USART1_PRIORITY 0xC0 -#endif - -/** - * @brief USART2 interrupt priority level setting. - * @note @p BASEPRI_KERNEL >= @p STM32_USART2_PRIORITY > @p PRIORITY_PENDSV. - */ -#if !defined(STM32_USART2_PRIORITY) || defined(__DOXYGEN__) -#define STM32_USART2_PRIORITY 0xC0 -#endif - -/** - * @brief USART3 interrupt priority level setting. - * @note @p BASEPRI_KERNEL >= @p STM32_USART3_PRIORITY > @p PRIORITY_PENDSV. - */ -#if !defined(STM32_USART3_PRIORITY) || defined(__DOXYGEN__) -#define STM32_USART3_PRIORITY 0xC0 -#endif - -/*===========================================================================*/ -/* Driver macros. */ -/*===========================================================================*/ - -/* - * Extra USARTs definitions here (missing from the ST header file). - */ -#define USART_CR2_STOP1_BITS (0 << 12) /**< @brief CR2 1 stop bit value.*/ -#define USART_CR2_STOP0P5_BITS (1 << 12) /**< @brief CR2 0.5 stop bit value.*/ -#define USART_CR2_STOP2_BITS (2 << 12) /**< @brief CR2 2 stop bit value.*/ -#define USART_CR2_STOP1P5_BITS (3 << 12) /**< @brief CR2 1.5 stop bit value.*/ - -/*===========================================================================*/ -/* Driver data structures. */ -/*===========================================================================*/ - -/** - * Serial Driver condition flags type. - */ -typedef uint32_t sdflags_t; - -/** - * @brief @p SerialDriver specific data. - */ -struct _serial_driver_data { - /** - * Input queue, incoming data can be read from this input queue by - * using the queues APIs. - */ - InputQueue iqueue; - /** - * Output queue, outgoing data can be written to this output queue by - * using the queues APIs. - */ - OutputQueue oqueue; - /** - * Status Change @p EventSource. This event is generated when one or more - * condition flags change. - */ - EventSource sevent; - /** - * I/O driver status flags. - */ - sdflags_t flags; - /** - * Input circular buffer. - */ - uint8_t ib[SERIAL_BUFFERS_SIZE]; - /** - * Output circular buffer. - */ - uint8_t ob[SERIAL_BUFFERS_SIZE]; -}; - -/** - * @brief STM32 Serial Driver configuration structure. - * @details An instance of this structure must be passed to @p sdStart() - * in order to configure and start a serial driver operations. - * - * @note This structure content is architecture dependent, each driver - * implementation defines its own version and the custom static - * initializers. - */ -typedef struct { - - uint32_t speed; - uint16_t cr1; - uint16_t cr2; - uint16_t cr3; -} SerialDriverConfig; - -/*===========================================================================*/ -/* External declarations. */ -/*===========================================================================*/ - -/** @cond never*/ -#if USE_STM32_USART1 -extern SerialDriver SD1; -#endif -#if USE_STM32_USART2 -extern SerialDriver SD2; -#endif -#if USE_STM32_USART3 -extern SerialDriver SD3; -#endif - -#ifdef __cplusplus -extern "C" { -#endif - void sd_lld_init(void); - void sd_lld_start(SerialDriver *sdp, const SerialDriverConfig *config); - void sd_lld_stop(SerialDriver *sdp); -#ifdef __cplusplus -} -#endif -/** @endcond*/ - -#endif /* _SERIAL_LLD_H_ */ - -/** @} */ diff --git a/os/io/platforms/STM32F103/stm32_can.c b/os/io/platforms/STM32F103/stm32_can.c deleted file mode 100644 index d97855a71..000000000 --- a/os/io/platforms/STM32F103/stm32_can.c +++ /dev/null @@ -1,27 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio. - - This file is part of ChibiOS/RT. - - ChibiOS/RT is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - ChibiOS/RT is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/** - * @file STM32F103/stm32_can.c - * @brief STM32 CAN driver code - * @addtogroup STM32F103_CAN - * @{ - */ - -/** @} */ diff --git a/os/io/platforms/STM32F103/stm32_can.h b/os/io/platforms/STM32F103/stm32_can.h deleted file mode 100644 index a124f7cdd..000000000 --- a/os/io/platforms/STM32F103/stm32_can.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio. - - This file is part of ChibiOS/RT. - - ChibiOS/RT is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - ChibiOS/RT is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/** - * @file STM32F103/stm32_can.h - * @brief STM32 CAN driver header file - * @addtogroup STM32F103_CAN - * @{ - */ - -#ifndef _STM32_CAN_H_ -#define _STM32_CAN_H_ - -typedef struct { -} CANConfig; - -typedef struct { -} CANMessage; - -#ifdef __cplusplus -extern "C" { -#endif - void canInit(CANConfig *config); - bool_t canReceive(CANMessage *canmsg); - bool_t canTransmit(CANMessage *canmsg); -#ifdef __cplusplus -} -#endif - -#endif /* _STM32_CAN_H_ */ - -/** @} */ diff --git a/os/io/platforms/STM32F103/stm32f10x.h b/os/io/platforms/STM32F103/stm32f10x.h deleted file mode 100644 index ec8f6f43e..000000000 --- a/os/io/platforms/STM32F103/stm32f10x.h +++ /dev/null @@ -1,7851 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f10x.h - * @author MCD Application Team - * @version V3.1.0 - * @date 06/19/2009 - * @brief CMSIS Cortex-M3 Device Peripheral Access Layer Header File. - * This file contains all the peripheral register's definitions, bits - * definitions and memory mapping for STM32F10x Connectivity line, High - * density, Medium density and Low density devices. - ****************************************************************************** - * - * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS - * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE - * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY - * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING - * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE - * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. - * - *

© COPYRIGHT 2009 STMicroelectronics

- ****************************************************************************** - */ - -/** @addtogroup CMSIS - * @{ - */ - -/** @addtogroup stm32f10x - * @{ - */ - -#ifndef __STM32F10x_H -#define __STM32F10x_H - -#ifdef __cplusplus - extern "C" { -#endif - -/** @addtogroup Library_configuration_section - * @{ - */ - -/* Uncomment the line below according to the target STM32 device used in your - application - */ - -#if !defined (STM32F10X_LD) && !defined (STM32F10X_MD) && !defined (STM32F10X_HD) && !defined (STM32F10X_CL) - /* #define STM32F10X_LD */ /*!< STM32F10X_LD: STM32 Low density devices */ - /* #define STM32F10X_MD */ /*!< STM32F10X_MD: STM32 Medium density devices */ - /* #define STM32F10X_HD */ /*!< STM32F10X_HD: STM32 High density devices */ - #define STM32F10X_CL /*!< STM32F10X_CL: STM32 Connectivity line devices */ -#endif -/* Tip: To avoid modifying this file each time you need to switch between these - devices, you can define the device in your toolchain compiler preprocessor. - - - Low density devices are STM32F101xx, STM32F102xx and STM32F103xx microcontrollers - where the Flash memory density ranges between 16 and 32 Kbytes. - - Medium density devices are STM32F101xx, STM32F102xx and STM32F103xx microcontrollers - where the Flash memory density ranges between 64 and 128 Kbytes. - - High density devices are STM32F101xx and STM32F103xx microcontrollers where - the Flash memory density ranges between 256 and 512 Kbytes. - - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers. - */ - -#if !defined USE_STDPERIPH_DRIVER -/** - * @brief Comment the line below if you will not use the peripherals drivers. - In this case, these drivers will not be included and the application code will - be based on direct access to peripherals registers - */ - /*#define USE_STDPERIPH_DRIVER*/ -#endif - -/** - * @brief In the following line adjust the value of External High Speed oscillator (HSE) - used in your application - - Tip: To avoid modifying this file each time you need to use different HSE, you - can define the HSE value in your toolchain compiler preprocessor. - */ -#if !defined HSE_Value - #ifdef STM32F10X_CL - #define HSE_Value ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */ - #else - #define HSE_Value ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */ - #endif /* STM32F10X_CL */ -#endif /* HSE_Value */ - - -/** - * @brief In the following line adjust the External High Speed oscillator (HSE) Startup - Timeout value - */ -#define HSEStartUp_TimeOut ((uint16_t)0x0500) /*!< Time out for HSE start up */ - -#define HSI_Value ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/ - -/** - * @brief STM32F10x Standard Peripheral Library version number - */ -#define __STM32F10X_STDPERIPH_VERSION_MAIN (0x03) /*!< [31:16] STM32F10x Standard Peripheral Library main version */ -#define __STM32F10X_STDPERIPH_VERSION_SUB1 (0x01) /*!< [15:8] STM32F10x Standard Peripheral Library sub1 version */ -#define __STM32F10X_STDPERIPH_VERSION_SUB2 (0x00) /*!< [7:0] STM32F10x Standard Peripheral Library sub2 version */ -#define __STM32F10X_STDPERIPH_VERSION ((__STM32F10X_STDPERIPH_VERSION_MAIN << 16)\ - | (__STM32F10X_STDPERIPH_VERSION_SUB1 << 8)\ - | __STM32F10X_STDPERIPH_VERSION_SUB2) - -/** - * @} - */ - -/** @addtogroup Configuration_section_for_CMSIS - * @{ - */ - -/** - * @brief Configuration of the Cortex-M3 Processor and Core Peripherals - */ -#define __MPU_PRESENT 0 /*!< STM32 does not provide an MPU */ -#define __NVIC_PRIO_BITS 4 /*!< STM32 uses 4 Bits for the Priority Levels */ -#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ - -/** - * @brief STM32F10x Interrupt Number Definition, according to the selected device - * in @ref Library_configuration_section - */ -typedef enum IRQn -{ -/****** Cortex-M3 Processor Exceptions Numbers ***************************************************/ - NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ - MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */ - BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */ - UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */ - SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */ - DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */ - PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */ - SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */ - -/****** STM32 specific Interrupt Numbers *********************************************************/ - WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ - PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ - TAMPER_IRQn = 2, /*!< Tamper Interrupt */ - RTC_IRQn = 3, /*!< RTC global Interrupt */ - FLASH_IRQn = 4, /*!< FLASH global Interrupt */ - RCC_IRQn = 5, /*!< RCC global Interrupt */ - EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ - EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ - EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ - EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ - EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ - DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */ - DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */ - DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */ - DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */ - DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */ - DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */ - DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */ - ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ - -#ifdef STM32F10X_LD - USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ - USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ - CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ - CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ - EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ - TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ - TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ - TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ - TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ - TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ - TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ - I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ - I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ - SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ - USART1_IRQn = 37, /*!< USART1 global Interrupt */ - USART2_IRQn = 38, /*!< USART2 global Interrupt */ - EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ - RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ - USBWakeUp_IRQn = 42, /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ -#endif /* STM32F10X_LD */ - -#ifdef STM32F10X_MD - USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ - USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ - CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ - CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ - EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ - TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ - TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ - TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ - TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ - TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ - TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ - TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ - I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ - I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ - I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ - I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ - SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ - SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ - USART1_IRQn = 37, /*!< USART1 global Interrupt */ - USART2_IRQn = 38, /*!< USART2 global Interrupt */ - USART3_IRQn = 39, /*!< USART3 global Interrupt */ - EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ - RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ - USBWakeUp_IRQn = 42, /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ -#endif /* STM32F10X_MD */ - -#ifdef STM32F10X_HD - USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ - USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ - CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ - CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ - EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ - TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ - TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ - TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ - TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ - TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ - TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ - TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ - I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ - I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ - I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ - I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ - SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ - SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ - USART1_IRQn = 37, /*!< USART1 global Interrupt */ - USART2_IRQn = 38, /*!< USART2 global Interrupt */ - USART3_IRQn = 39, /*!< USART3 global Interrupt */ - EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ - RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ - USBWakeUp_IRQn = 42, /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ - TIM8_BRK_IRQn = 43, /*!< TIM8 Break Interrupt */ - TIM8_UP_IRQn = 44, /*!< TIM8 Update Interrupt */ - TIM8_TRG_COM_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt */ - TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ - ADC3_IRQn = 47, /*!< ADC3 global Interrupt */ - FSMC_IRQn = 48, /*!< FSMC global Interrupt */ - SDIO_IRQn = 49, /*!< SDIO global Interrupt */ - TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ - SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ - UART4_IRQn = 52, /*!< UART4 global Interrupt */ - UART5_IRQn = 53, /*!< UART5 global Interrupt */ - TIM6_IRQn = 54, /*!< TIM6 global Interrupt */ - TIM7_IRQn = 55, /*!< TIM7 global Interrupt */ - DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ - DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ - DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ - DMA2_Channel4_5_IRQn = 59 /*!< DMA2 Channel 4 and Channel 5 global Interrupt */ -#endif /* STM32F10X_HD */ - -#ifdef STM32F10X_CL - CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ - CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ - CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ - CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ - EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ - TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ - TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ - TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ - TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ - TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ - TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ - TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ - I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ - I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ - I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ - I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ - SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ - SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ - USART1_IRQn = 37, /*!< USART1 global Interrupt */ - USART2_IRQn = 38, /*!< USART2 global Interrupt */ - USART3_IRQn = 39, /*!< USART3 global Interrupt */ - EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ - RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ - OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS WakeUp from suspend through EXTI Line Interrupt */ - TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ - SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ - UART4_IRQn = 52, /*!< UART4 global Interrupt */ - UART5_IRQn = 53, /*!< UART5 global Interrupt */ - TIM6_IRQn = 54, /*!< TIM6 global Interrupt */ - TIM7_IRQn = 55, /*!< TIM7 global Interrupt */ - DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ - DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ - DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ - DMA2_Channel4_IRQn = 59, /*!< DMA2 Channel 4 global Interrupt */ - DMA2_Channel5_IRQn = 60, /*!< DMA2 Channel 5 global Interrupt */ - ETH_IRQn = 61, /*!< Ethernet global Interrupt */ - ETH_WKUP_IRQn = 62, /*!< Ethernet Wakeup through EXTI line Interrupt */ - CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */ - CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */ - CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */ - CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */ - OTG_FS_IRQn = 67 /*!< USB OTG FS global Interrupt */ -#endif /* STM32F10X_CL */ -} IRQn_Type; - -/** - * @} - */ - -#include "core_cm3.h" -//#include "system_stm32f10x.h" -#include - -/** @addtogroup Exported_types - * @{ - */ - -/*!< STM32F10x Standard Peripheral Library old types (maintained for legacy purpose) */ -typedef int32_t s32; -typedef int16_t s16; -typedef int8_t s8; - -typedef const int32_t sc32; /*!< Read Only */ -typedef const int16_t sc16; /*!< Read Only */ -typedef const int8_t sc8; /*!< Read Only */ - -typedef __IO int32_t vs32; -typedef __IO int16_t vs16; -typedef __IO int8_t vs8; - -typedef __I int32_t vsc32; /*!< Read Only */ -typedef __I int16_t vsc16; /*!< Read Only */ -typedef __I int8_t vsc8; /*!< Read Only */ - -typedef uint32_t u32; -typedef uint16_t u16; -typedef uint8_t u8; - -typedef const uint32_t uc32; /*!< Read Only */ -typedef const uint16_t uc16; /*!< Read Only */ -typedef const uint8_t uc8; /*!< Read Only */ - -typedef __IO uint32_t vu32; -typedef __IO uint16_t vu16; -typedef __IO uint8_t vu8; - -typedef __I uint32_t vuc32; /*!< Read Only */ -typedef __I uint16_t vuc16; /*!< Read Only */ -typedef __I uint8_t vuc8; /*!< Read Only */ - -#ifndef __cplusplus -typedef enum {FALSE = 0, TRUE = !FALSE} bool; -#endif - -typedef enum {RESET = 0, SET = !RESET} FlagStatus, ITStatus; - -typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState; -#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) - -typedef enum {ERROR = 0, SUCCESS = !ERROR} ErrorStatus; - -/** - * @} - */ - -/** @addtogroup Peripheral_registers_structures - * @{ - */ - -/** - * @brief Analog to Digital Converter - */ - -typedef struct -{ - __IO uint32_t SR; - __IO uint32_t CR1; - __IO uint32_t CR2; - __IO uint32_t SMPR1; - __IO uint32_t SMPR2; - __IO uint32_t JOFR1; - __IO uint32_t JOFR2; - __IO uint32_t JOFR3; - __IO uint32_t JOFR4; - __IO uint32_t HTR; - __IO uint32_t LTR; - __IO uint32_t SQR1; - __IO uint32_t SQR2; - __IO uint32_t SQR3; - __IO uint32_t JSQR; - __IO uint32_t JDR1; - __IO uint32_t JDR2; - __IO uint32_t JDR3; - __IO uint32_t JDR4; - __IO uint32_t DR; -} ADC_TypeDef; - -/** - * @brief Backup Registers - */ - -typedef struct -{ - uint32_t RESERVED0; - __IO uint16_t DR1; - uint16_t RESERVED1; - __IO uint16_t DR2; - uint16_t RESERVED2; - __IO uint16_t DR3; - uint16_t RESERVED3; - __IO uint16_t DR4; - uint16_t RESERVED4; - __IO uint16_t DR5; - uint16_t RESERVED5; - __IO uint16_t DR6; - uint16_t RESERVED6; - __IO uint16_t DR7; - uint16_t RESERVED7; - __IO uint16_t DR8; - uint16_t RESERVED8; - __IO uint16_t DR9; - uint16_t RESERVED9; - __IO uint16_t DR10; - uint16_t RESERVED10; - __IO uint16_t RTCCR; - uint16_t RESERVED11; - __IO uint16_t CR; - uint16_t RESERVED12; - __IO uint16_t CSR; - uint16_t RESERVED13[5]; - __IO uint16_t DR11; - uint16_t RESERVED14; - __IO uint16_t DR12; - uint16_t RESERVED15; - __IO uint16_t DR13; - uint16_t RESERVED16; - __IO uint16_t DR14; - uint16_t RESERVED17; - __IO uint16_t DR15; - uint16_t RESERVED18; - __IO uint16_t DR16; - uint16_t RESERVED19; - __IO uint16_t DR17; - uint16_t RESERVED20; - __IO uint16_t DR18; - uint16_t RESERVED21; - __IO uint16_t DR19; - uint16_t RESERVED22; - __IO uint16_t DR20; - uint16_t RESERVED23; - __IO uint16_t DR21; - uint16_t RESERVED24; - __IO uint16_t DR22; - uint16_t RESERVED25; - __IO uint16_t DR23; - uint16_t RESERVED26; - __IO uint16_t DR24; - uint16_t RESERVED27; - __IO uint16_t DR25; - uint16_t RESERVED28; - __IO uint16_t DR26; - uint16_t RESERVED29; - __IO uint16_t DR27; - uint16_t RESERVED30; - __IO uint16_t DR28; - uint16_t RESERVED31; - __IO uint16_t DR29; - uint16_t RESERVED32; - __IO uint16_t DR30; - uint16_t RESERVED33; - __IO uint16_t DR31; - uint16_t RESERVED34; - __IO uint16_t DR32; - uint16_t RESERVED35; - __IO uint16_t DR33; - uint16_t RESERVED36; - __IO uint16_t DR34; - uint16_t RESERVED37; - __IO uint16_t DR35; - uint16_t RESERVED38; - __IO uint16_t DR36; - uint16_t RESERVED39; - __IO uint16_t DR37; - uint16_t RESERVED40; - __IO uint16_t DR38; - uint16_t RESERVED41; - __IO uint16_t DR39; - uint16_t RESERVED42; - __IO uint16_t DR40; - uint16_t RESERVED43; - __IO uint16_t DR41; - uint16_t RESERVED44; - __IO uint16_t DR42; - uint16_t RESERVED45; -} BKP_TypeDef; - -/** - * @brief Controller Area Network TxMailBox - */ - -typedef struct -{ - __IO uint32_t TIR; - __IO uint32_t TDTR; - __IO uint32_t TDLR; - __IO uint32_t TDHR; -} CAN_TxMailBox_TypeDef; - -/** - * @brief Controller Area Network FIFOMailBox - */ - -typedef struct -{ - __IO uint32_t RIR; - __IO uint32_t RDTR; - __IO uint32_t RDLR; - __IO uint32_t RDHR; -} CAN_FIFOMailBox_TypeDef; - -/** - * @brief Controller Area Network FilterRegister - */ - -typedef struct -{ - __IO uint32_t FR1; - __IO uint32_t FR2; -} CAN_FilterRegister_TypeDef; - -/** - * @brief Controller Area Network - */ - -typedef struct -{ - __IO uint32_t MCR; - __IO uint32_t MSR; - __IO uint32_t TSR; - __IO uint32_t RF0R; - __IO uint32_t RF1R; - __IO uint32_t IER; - __IO uint32_t ESR; - __IO uint32_t BTR; - uint32_t RESERVED0[88]; - CAN_TxMailBox_TypeDef sTxMailBox[3]; - CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; - uint32_t RESERVED1[12]; - __IO uint32_t FMR; - __IO uint32_t FM1R; - uint32_t RESERVED2; - __IO uint32_t FS1R; - uint32_t RESERVED3; - __IO uint32_t FFA1R; - uint32_t RESERVED4; - __IO uint32_t FA1R; - uint32_t RESERVED5[8]; -#ifndef STM32F10X_CL - CAN_FilterRegister_TypeDef sFilterRegister[14]; -#else - CAN_FilterRegister_TypeDef sFilterRegister[28]; -#endif /* STM32F10X_CL */ -} CAN_TypeDef; - -/** - * @brief CRC calculation unit - */ - -typedef struct -{ - __IO uint32_t DR; - __IO uint8_t IDR; - uint8_t RESERVED0; - uint16_t RESERVED1; - __IO uint32_t CR; -} CRC_TypeDef; - -/** - * @brief Digital to Analog Converter - */ - -typedef struct -{ - __IO uint32_t CR; - __IO uint32_t SWTRIGR; - __IO uint32_t DHR12R1; - __IO uint32_t DHR12L1; - __IO uint32_t DHR8R1; - __IO uint32_t DHR12R2; - __IO uint32_t DHR12L2; - __IO uint32_t DHR8R2; - __IO uint32_t DHR12RD; - __IO uint32_t DHR12LD; - __IO uint32_t DHR8RD; - __IO uint32_t DOR1; - __IO uint32_t DOR2; -} DAC_TypeDef; - -/** - * @brief Debug MCU - */ - -typedef struct -{ - __IO uint32_t IDCODE; - __IO uint32_t CR; -}DBGMCU_TypeDef; - -/** - * @brief DMA Controller - */ - -typedef struct -{ - __IO uint32_t CCR; - __IO uint32_t CNDTR; - __IO uint32_t CPAR; - __IO uint32_t CMAR; -} DMA_Channel_TypeDef; - -typedef struct -{ - __IO uint32_t ISR; - __IO uint32_t IFCR; -} DMA_TypeDef; - -/** - * @brief Ethernet MAC - */ - -typedef struct -{ - __IO uint32_t MACCR; - __IO uint32_t MACFFR; - __IO uint32_t MACHTHR; - __IO uint32_t MACHTLR; - __IO uint32_t MACMIIAR; - __IO uint32_t MACMIIDR; - __IO uint32_t MACFCR; - __IO uint32_t MACVLANTR; /* 8 */ - uint32_t RESERVED0[2]; - __IO uint32_t MACRWUFFR; /* 11 */ - __IO uint32_t MACPMTCSR; - uint32_t RESERVED1[2]; - __IO uint32_t MACSR; /* 15 */ - __IO uint32_t MACIMR; - __IO uint32_t MACA0HR; - __IO uint32_t MACA0LR; - __IO uint32_t MACA1HR; - __IO uint32_t MACA1LR; - __IO uint32_t MACA2HR; - __IO uint32_t MACA2LR; - __IO uint32_t MACA3HR; - __IO uint32_t MACA3LR; /* 24 */ - uint32_t RESERVED2[40]; - __IO uint32_t MMCCR; /* 65 */ - __IO uint32_t MMCRIR; - __IO uint32_t MMCTIR; - __IO uint32_t MMCRIMR; - __IO uint32_t MMCTIMR; /* 69 */ - uint32_t RESERVED3[14]; - __IO uint32_t MMCTGFSCCR; /* 84 */ - __IO uint32_t MMCTGFMSCCR; - uint32_t RESERVED4[5]; - __IO uint32_t MMCTGFCR; - uint32_t RESERVED5[10]; - __IO uint32_t MMCRFCECR; - __IO uint32_t MMCRFAECR; - uint32_t RESERVED6[10]; - __IO uint32_t MMCRGUFCR; - uint32_t RESERVED7[334]; - __IO uint32_t PTPTSCR; - __IO uint32_t PTPSSIR; - __IO uint32_t PTPTSHR; - __IO uint32_t PTPTSLR; - __IO uint32_t PTPTSHUR; - __IO uint32_t PTPTSLUR; - __IO uint32_t PTPTSAR; - __IO uint32_t PTPTTHR; - __IO uint32_t PTPTTLR; - uint32_t RESERVED8[567]; - __IO uint32_t DMABMR; - __IO uint32_t DMATPDR; - __IO uint32_t DMARPDR; - __IO uint32_t DMARDLAR; - __IO uint32_t DMATDLAR; - __IO uint32_t DMASR; - __IO uint32_t DMAOMR; - __IO uint32_t DMAIER; - __IO uint32_t DMAMFBOCR; - uint32_t RESERVED9[9]; - __IO uint32_t DMACHTDR; - __IO uint32_t DMACHRDR; - __IO uint32_t DMACHTBAR; - __IO uint32_t DMACHRBAR; -} ETH_TypeDef; - -/** - * @brief External Interrupt/Event Controller - */ - -typedef struct -{ - __IO uint32_t IMR; - __IO uint32_t EMR; - __IO uint32_t RTSR; - __IO uint32_t FTSR; - __IO uint32_t SWIER; - __IO uint32_t PR; -} EXTI_TypeDef; - -/** - * @brief FLASH Registers - */ - -typedef struct -{ - __IO uint32_t ACR; - __IO uint32_t KEYR; - __IO uint32_t OPTKEYR; - __IO uint32_t SR; - __IO uint32_t CR; - __IO uint32_t AR; - __IO uint32_t RESERVED; - __IO uint32_t OBR; - __IO uint32_t WRPR; -} FLASH_TypeDef; - -/** - * @brief Option Bytes Registers - */ - -typedef struct -{ - __IO uint16_t RDP; - __IO uint16_t USER; - __IO uint16_t Data0; - __IO uint16_t Data1; - __IO uint16_t WRP0; - __IO uint16_t WRP1; - __IO uint16_t WRP2; - __IO uint16_t WRP3; -} OB_TypeDef; - -/** - * @brief Flexible Static Memory Controller - */ - -typedef struct -{ - __IO uint32_t BTCR[8]; -} FSMC_Bank1_TypeDef; - -/** - * @brief Flexible Static Memory Controller Bank1E - */ - -typedef struct -{ - __IO uint32_t BWTR[7]; -} FSMC_Bank1E_TypeDef; - -/** - * @brief Flexible Static Memory Controller Bank2 - */ - -typedef struct -{ - __IO uint32_t PCR2; - __IO uint32_t SR2; - __IO uint32_t PMEM2; - __IO uint32_t PATT2; - uint32_t RESERVED0; - __IO uint32_t ECCR2; -} FSMC_Bank2_TypeDef; - -/** - * @brief Flexible Static Memory Controller Bank3 - */ - -typedef struct -{ - __IO uint32_t PCR3; - __IO uint32_t SR3; - __IO uint32_t PMEM3; - __IO uint32_t PATT3; - uint32_t RESERVED0; - __IO uint32_t ECCR3; -} FSMC_Bank3_TypeDef; - -/** - * @brief Flexible Static Memory Controller Bank4 - */ - -typedef struct -{ - __IO uint32_t PCR4; - __IO uint32_t SR4; - __IO uint32_t PMEM4; - __IO uint32_t PATT4; - __IO uint32_t PIO4; -} FSMC_Bank4_TypeDef; - -/** - * @brief General Purpose I/O - */ - -typedef struct -{ - __IO uint32_t CRL; - __IO uint32_t CRH; - __IO uint32_t IDR; - __IO uint32_t ODR; - __IO uint32_t BSRR; - __IO uint32_t BRR; - __IO uint32_t LCKR; -} GPIO_TypeDef; - -/** - * @brief Alternate Function I/O - */ - -typedef struct -{ - __IO uint32_t EVCR; - __IO uint32_t MAPR; - __IO uint32_t EXTICR[4]; -} AFIO_TypeDef; -/** - * @brief Inter-integrated Circuit Interface - */ - -typedef struct -{ - __IO uint16_t CR1; - uint16_t RESERVED0; - __IO uint16_t CR2; - uint16_t RESERVED1; - __IO uint16_t OAR1; - uint16_t RESERVED2; - __IO uint16_t OAR2; - uint16_t RESERVED3; - __IO uint16_t DR; - uint16_t RESERVED4; - __IO uint16_t SR1; - uint16_t RESERVED5; - __IO uint16_t SR2; - uint16_t RESERVED6; - __IO uint16_t CCR; - uint16_t RESERVED7; - __IO uint16_t TRISE; - uint16_t RESERVED8; -} I2C_TypeDef; - -/** - * @brief Independent WATCHDOG - */ - -typedef struct -{ - __IO uint32_t KR; - __IO uint32_t PR; - __IO uint32_t RLR; - __IO uint32_t SR; -} IWDG_TypeDef; - -/** - * @brief Power Control - */ - -typedef struct -{ - __IO uint32_t CR; - __IO uint32_t CSR; -} PWR_TypeDef; - -/** - * @brief Reset and Clock Control - */ - -typedef struct -{ - __IO uint32_t CR; - __IO uint32_t CFGR; - __IO uint32_t CIR; - __IO uint32_t APB2RSTR; - __IO uint32_t APB1RSTR; - __IO uint32_t AHBENR; - __IO uint32_t APB2ENR; - __IO uint32_t APB1ENR; - __IO uint32_t BDCR; - __IO uint32_t CSR; -#ifdef STM32F10X_CL - __IO uint32_t AHBRSTR; - __IO uint32_t CFGR2; -#endif /* STM32F10X_CL */ -} RCC_TypeDef; - -/** - * @brief Real-Time Clock - */ - -typedef struct -{ - __IO uint16_t CRH; - uint16_t RESERVED0; - __IO uint16_t CRL; - uint16_t RESERVED1; - __IO uint16_t PRLH; - uint16_t RESERVED2; - __IO uint16_t PRLL; - uint16_t RESERVED3; - __IO uint16_t DIVH; - uint16_t RESERVED4; - __IO uint16_t DIVL; - uint16_t RESERVED5; - __IO uint16_t CNTH; - uint16_t RESERVED6; - __IO uint16_t CNTL; - uint16_t RESERVED7; - __IO uint16_t ALRH; - uint16_t RESERVED8; - __IO uint16_t ALRL; - uint16_t RESERVED9; -} RTC_TypeDef; - -/** - * @brief SD host Interface - */ - -typedef struct -{ - __IO uint32_t POWER; - __IO uint32_t CLKCR; - __IO uint32_t ARG; - __IO uint32_t CMD; - __I uint32_t RESPCMD; - __I uint32_t RESP1; - __I uint32_t RESP2; - __I uint32_t RESP3; - __I uint32_t RESP4; - __IO uint32_t DTIMER; - __IO uint32_t DLEN; - __IO uint32_t DCTRL; - __I uint32_t DCOUNT; - __I uint32_t STA; - __IO uint32_t ICR; - __IO uint32_t MASK; - uint32_t RESERVED0[2]; - __I uint32_t FIFOCNT; - uint32_t RESERVED1[13]; - __IO uint32_t FIFO; -} SDIO_TypeDef; - -/** - * @brief Serial Peripheral Interface - */ - -typedef struct -{ - __IO uint16_t CR1; - uint16_t RESERVED0; - __IO uint16_t CR2; - uint16_t RESERVED1; - __IO uint16_t SR; - uint16_t RESERVED2; - __IO uint16_t DR; - uint16_t RESERVED3; - __IO uint16_t CRCPR; - uint16_t RESERVED4; - __IO uint16_t RXCRCR; - uint16_t RESERVED5; - __IO uint16_t TXCRCR; - uint16_t RESERVED6; - __IO uint16_t I2SCFGR; - uint16_t RESERVED7; - __IO uint16_t I2SPR; - uint16_t RESERVED8; -} SPI_TypeDef; - -/** - * @brief TIM - */ - -typedef struct -{ - __IO uint16_t CR1; - uint16_t RESERVED0; - __IO uint16_t CR2; - uint16_t RESERVED1; - __IO uint16_t SMCR; - uint16_t RESERVED2; - __IO uint16_t DIER; - uint16_t RESERVED3; - __IO uint16_t SR; - uint16_t RESERVED4; - __IO uint16_t EGR; - uint16_t RESERVED5; - __IO uint16_t CCMR1; - uint16_t RESERVED6; - __IO uint16_t CCMR2; - uint16_t RESERVED7; - __IO uint16_t CCER; - uint16_t RESERVED8; - __IO uint16_t CNT; - uint16_t RESERVED9; - __IO uint16_t PSC; - uint16_t RESERVED10; - __IO uint16_t ARR; - uint16_t RESERVED11; - __IO uint16_t RCR; - uint16_t RESERVED12; - __IO uint16_t CCR1; - uint16_t RESERVED13; - __IO uint16_t CCR2; - uint16_t RESERVED14; - __IO uint16_t CCR3; - uint16_t RESERVED15; - __IO uint16_t CCR4; - uint16_t RESERVED16; - __IO uint16_t BDTR; - uint16_t RESERVED17; - __IO uint16_t DCR; - uint16_t RESERVED18; - __IO uint16_t DMAR; - uint16_t RESERVED19; -} TIM_TypeDef; - -/** - * @brief Universal Synchronous Asynchronous Receiver Transmitter - */ - -typedef struct -{ - __IO uint16_t SR; - uint16_t RESERVED0; - __IO uint16_t DR; - uint16_t RESERVED1; - __IO uint16_t BRR; - uint16_t RESERVED2; - __IO uint16_t CR1; - uint16_t RESERVED3; - __IO uint16_t CR2; - uint16_t RESERVED4; - __IO uint16_t CR3; - uint16_t RESERVED5; - __IO uint16_t GTPR; - uint16_t RESERVED6; -} USART_TypeDef; - -/** - * @brief Window WATCHDOG - */ - -typedef struct -{ - __IO uint32_t CR; - __IO uint32_t CFR; - __IO uint32_t SR; -} WWDG_TypeDef; - -/** - * @} - */ - -/** @addtogroup Peripheral_memory_map - * @{ - */ - -#define PERIPH_BB_BASE ((uint32_t)0x42000000) /*!< Peripheral base address in the alias region */ -#define SRAM_BB_BASE ((uint32_t)0x22000000) /*!< SRAM base address in the alias region */ - -#define SRAM_BASE ((uint32_t)0x20000000) /*!< Peripheral base address in the bit-band region */ -#define PERIPH_BASE ((uint32_t)0x40000000) /*!< SRAM base address in the bit-band region */ - -#define FSMC_R_BASE ((uint32_t)0xA0000000) /*!< FSMC registers base address */ - -/*!< Peripheral memory map */ -#define APB1PERIPH_BASE PERIPH_BASE -#define APB2PERIPH_BASE (PERIPH_BASE + 0x10000) -#define AHBPERIPH_BASE (PERIPH_BASE + 0x20000) - -#define TIM2_BASE (APB1PERIPH_BASE + 0x0000) -#define TIM3_BASE (APB1PERIPH_BASE + 0x0400) -#define TIM4_BASE (APB1PERIPH_BASE + 0x0800) -#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00) -#define TIM6_BASE (APB1PERIPH_BASE + 0x1000) -#define TIM7_BASE (APB1PERIPH_BASE + 0x1400) -#define RTC_BASE (APB1PERIPH_BASE + 0x2800) -#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00) -#define IWDG_BASE (APB1PERIPH_BASE + 0x3000) -#define SPI2_BASE (APB1PERIPH_BASE + 0x3800) -#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00) -#define USART2_BASE (APB1PERIPH_BASE + 0x4400) -#define USART3_BASE (APB1PERIPH_BASE + 0x4800) -#define UART4_BASE (APB1PERIPH_BASE + 0x4C00) -#define UART5_BASE (APB1PERIPH_BASE + 0x5000) -#define I2C1_BASE (APB1PERIPH_BASE + 0x5400) -#define I2C2_BASE (APB1PERIPH_BASE + 0x5800) -#define CAN1_BASE (APB1PERIPH_BASE + 0x6400) -#define CAN2_BASE (APB1PERIPH_BASE + 0x6800) -#define BKP_BASE (APB1PERIPH_BASE + 0x6C00) -#define PWR_BASE (APB1PERIPH_BASE + 0x7000) -#define DAC_BASE (APB1PERIPH_BASE + 0x7400) - -#define AFIO_BASE (APB2PERIPH_BASE + 0x0000) -#define EXTI_BASE (APB2PERIPH_BASE + 0x0400) -#define GPIOA_BASE (APB2PERIPH_BASE + 0x0800) -#define GPIOB_BASE (APB2PERIPH_BASE + 0x0C00) -#define GPIOC_BASE (APB2PERIPH_BASE + 0x1000) -#define GPIOD_BASE (APB2PERIPH_BASE + 0x1400) -#define GPIOE_BASE (APB2PERIPH_BASE + 0x1800) -#define GPIOF_BASE (APB2PERIPH_BASE + 0x1C00) -#define GPIOG_BASE (APB2PERIPH_BASE + 0x2000) -#define ADC1_BASE (APB2PERIPH_BASE + 0x2400) -#define ADC2_BASE (APB2PERIPH_BASE + 0x2800) -#define TIM1_BASE (APB2PERIPH_BASE + 0x2C00) -#define SPI1_BASE (APB2PERIPH_BASE + 0x3000) -#define TIM8_BASE (APB2PERIPH_BASE + 0x3400) -#define USART1_BASE (APB2PERIPH_BASE + 0x3800) -#define ADC3_BASE (APB2PERIPH_BASE + 0x3C00) - -#define SDIO_BASE (PERIPH_BASE + 0x18000) - -#define DMA1_BASE (AHBPERIPH_BASE + 0x0000) -#define DMA1_Channel1_BASE (AHBPERIPH_BASE + 0x0008) -#define DMA1_Channel2_BASE (AHBPERIPH_BASE + 0x001C) -#define DMA1_Channel3_BASE (AHBPERIPH_BASE + 0x0030) -#define DMA1_Channel4_BASE (AHBPERIPH_BASE + 0x0044) -#define DMA1_Channel5_BASE (AHBPERIPH_BASE + 0x0058) -#define DMA1_Channel6_BASE (AHBPERIPH_BASE + 0x006C) -#define DMA1_Channel7_BASE (AHBPERIPH_BASE + 0x0080) -#define DMA2_BASE (AHBPERIPH_BASE + 0x0400) -#define DMA2_Channel1_BASE (AHBPERIPH_BASE + 0x0408) -#define DMA2_Channel2_BASE (AHBPERIPH_BASE + 0x041C) -#define DMA2_Channel3_BASE (AHBPERIPH_BASE + 0x0430) -#define DMA2_Channel4_BASE (AHBPERIPH_BASE + 0x0444) -#define DMA2_Channel5_BASE (AHBPERIPH_BASE + 0x0458) -#define RCC_BASE (AHBPERIPH_BASE + 0x1000) -#define CRC_BASE (AHBPERIPH_BASE + 0x3000) - -#define FLASH_R_BASE (AHBPERIPH_BASE + 0x2000) /*!< Flash registers base address */ -#define OB_BASE ((uint32_t)0x1FFFF800) /*!< Flash Option Bytes base address */ - -#define ETH_BASE (AHBPERIPH_BASE + 0x8000) -#define ETH_MAC_BASE (ETH_BASE) -#define ETH_MMC_BASE (ETH_BASE + 0x0100) -#define ETH_PTP_BASE (ETH_BASE + 0x0700) -#define ETH_DMA_BASE (ETH_BASE + 0x1000) - -#define FSMC_Bank1_R_BASE (FSMC_R_BASE + 0x0000) /*!< FSMC Bank1 registers base address */ -#define FSMC_Bank1E_R_BASE (FSMC_R_BASE + 0x0104) /*!< FSMC Bank1E registers base address */ -#define FSMC_Bank2_R_BASE (FSMC_R_BASE + 0x0060) /*!< FSMC Bank2 registers base address */ -#define FSMC_Bank3_R_BASE (FSMC_R_BASE + 0x0080) /*!< FSMC Bank3 registers base address */ -#define FSMC_Bank4_R_BASE (FSMC_R_BASE + 0x00A0) /*!< FSMC Bank4 registers base address */ - -#define DBGMCU_BASE ((uint32_t)0xE0042000) /*!< Debug MCU registers base address */ - -/** - * @} - */ - -/** @addtogroup Peripheral_declaration - * @{ - */ - -#define TIM2 ((TIM_TypeDef *) TIM2_BASE) -#define TIM3 ((TIM_TypeDef *) TIM3_BASE) -#define TIM4 ((TIM_TypeDef *) TIM4_BASE) -#define TIM5 ((TIM_TypeDef *) TIM5_BASE) -#define TIM6 ((TIM_TypeDef *) TIM6_BASE) -#define TIM7 ((TIM_TypeDef *) TIM7_BASE) -#define RTC ((RTC_TypeDef *) RTC_BASE) -#define WWDG ((WWDG_TypeDef *) WWDG_BASE) -#define IWDG ((IWDG_TypeDef *) IWDG_BASE) -#define SPI2 ((SPI_TypeDef *) SPI2_BASE) -#define SPI3 ((SPI_TypeDef *) SPI3_BASE) -#define USART2 ((USART_TypeDef *) USART2_BASE) -#define USART3 ((USART_TypeDef *) USART3_BASE) -#define UART4 ((USART_TypeDef *) UART4_BASE) -#define UART5 ((USART_TypeDef *) UART5_BASE) -#define I2C1 ((I2C_TypeDef *) I2C1_BASE) -#define I2C2 ((I2C_TypeDef *) I2C2_BASE) -#define CAN1 ((CAN_TypeDef *) CAN1_BASE) -#define CAN2 ((CAN_TypeDef *) CAN2_BASE) -#define BKP ((BKP_TypeDef *) BKP_BASE) -#define PWR ((PWR_TypeDef *) PWR_BASE) -#define DAC ((DAC_TypeDef *) DAC_BASE) -#define AFIO ((AFIO_TypeDef *) AFIO_BASE) -#define EXTI ((EXTI_TypeDef *) EXTI_BASE) -#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) -#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) -#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) -#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) -#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) -#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) -#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE) -#define ADC1 ((ADC_TypeDef *) ADC1_BASE) -#define ADC2 ((ADC_TypeDef *) ADC2_BASE) -#define TIM1 ((TIM_TypeDef *) TIM1_BASE) -#define SPI1 ((SPI_TypeDef *) SPI1_BASE) -#define TIM8 ((TIM_TypeDef *) TIM8_BASE) -#define USART1 ((USART_TypeDef *) USART1_BASE) -#define ADC3 ((ADC_TypeDef *) ADC3_BASE) -#define SDIO ((SDIO_TypeDef *) SDIO_BASE) -#define DMA1 ((DMA_TypeDef *) DMA1_BASE) -#define DMA2 ((DMA_TypeDef *) DMA2_BASE) -#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) -#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) -#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) -#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE) -#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE) -#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE) -#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE) -#define DMA2_Channel1 ((DMA_Channel_TypeDef *) DMA2_Channel1_BASE) -#define DMA2_Channel2 ((DMA_Channel_TypeDef *) DMA2_Channel2_BASE) -#define DMA2_Channel3 ((DMA_Channel_TypeDef *) DMA2_Channel3_BASE) -#define DMA2_Channel4 ((DMA_Channel_TypeDef *) DMA2_Channel4_BASE) -#define DMA2_Channel5 ((DMA_Channel_TypeDef *) DMA2_Channel5_BASE) -#define RCC ((RCC_TypeDef *) RCC_BASE) -#define CRC ((CRC_TypeDef *) CRC_BASE) -#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) -#define OB ((OB_TypeDef *) OB_BASE) -#define ETH ((ETH_TypeDef *) ETH_BASE) -#define FSMC_Bank1 ((FSMC_Bank1_TypeDef *) FSMC_Bank1_R_BASE) -#define FSMC_Bank1E ((FSMC_Bank1E_TypeDef *) FSMC_Bank1E_R_BASE) -#define FSMC_Bank2 ((FSMC_Bank2_TypeDef *) FSMC_Bank2_R_BASE) -#define FSMC_Bank3 ((FSMC_Bank3_TypeDef *) FSMC_Bank3_R_BASE) -#define FSMC_Bank4 ((FSMC_Bank4_TypeDef *) FSMC_Bank4_R_BASE) -#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) - -/** - * @} - */ - -/** @addtogroup Exported_constants - * @{ - */ - - /** @addtogroup Peripheral_Registers_Bits_Definition - * @{ - */ - -/******************************************************************************/ -/* Peripheral Registers_Bits_Definition */ -/******************************************************************************/ - -/******************************************************************************/ -/* */ -/* CRC calculation unit */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for CRC_DR register *********************/ -#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */ - - -/******************* Bit definition for CRC_IDR register ********************/ -#define CRC_IDR_IDR ((uint8_t)0xFF) /*!< General-purpose 8-bit data register bits */ - - -/******************** Bit definition for CRC_CR register ********************/ -#define CRC_CR_RESET ((uint8_t)0x01) /*!< RESET bit */ - -/******************************************************************************/ -/* */ -/* Power Control */ -/* */ -/******************************************************************************/ - -/******************** Bit definition for PWR_CR register ********************/ -#define PWR_CR_LPDS ((uint16_t)0x0001) /*!< Low-Power Deepsleep */ -#define PWR_CR_PDDS ((uint16_t)0x0002) /*!< Power Down Deepsleep */ -#define PWR_CR_CWUF ((uint16_t)0x0004) /*!< Clear Wakeup Flag */ -#define PWR_CR_CSBF ((uint16_t)0x0008) /*!< Clear Standby Flag */ -#define PWR_CR_PVDE ((uint16_t)0x0010) /*!< Power Voltage Detector Enable */ - -#define PWR_CR_PLS ((uint16_t)0x00E0) /*!< PLS[2:0] bits (PVD Level Selection) */ -#define PWR_CR_PLS_0 ((uint16_t)0x0020) /*!< Bit 0 */ -#define PWR_CR_PLS_1 ((uint16_t)0x0040) /*!< Bit 1 */ -#define PWR_CR_PLS_2 ((uint16_t)0x0080) /*!< Bit 2 */ - -/*!< PVD level configuration */ -#define PWR_CR_PLS_2V2 ((uint16_t)0x0000) /*!< PVD level 2.2V */ -#define PWR_CR_PLS_2V3 ((uint16_t)0x0020) /*!< PVD level 2.3V */ -#define PWR_CR_PLS_2V4 ((uint16_t)0x0040) /*!< PVD level 2.4V */ -#define PWR_CR_PLS_2V5 ((uint16_t)0x0060) /*!< PVD level 2.5V */ -#define PWR_CR_PLS_2V6 ((uint16_t)0x0080) /*!< PVD level 2.6V */ -#define PWR_CR_PLS_2V7 ((uint16_t)0x00A0) /*!< PVD level 2.7V */ -#define PWR_CR_PLS_2V8 ((uint16_t)0x00C0) /*!< PVD level 2.8V */ -#define PWR_CR_PLS_2V9 ((uint16_t)0x00E0) /*!< PVD level 2.9V */ - -#define PWR_CR_DBP ((uint16_t)0x0100) /*!< Disable Backup Domain write protection */ - - -/******************* Bit definition for PWR_CSR register ********************/ -#define PWR_CSR_WUF ((uint16_t)0x0001) /*!< Wakeup Flag */ -#define PWR_CSR_SBF ((uint16_t)0x0002) /*!< Standby Flag */ -#define PWR_CSR_PVDO ((uint16_t)0x0004) /*!< PVD Output */ -#define PWR_CSR_EWUP ((uint16_t)0x0100) /*!< Enable WKUP pin */ - -/******************************************************************************/ -/* */ -/* Backup registers */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for BKP_DR1 register ********************/ -#define BKP_DR1_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR2 register ********************/ -#define BKP_DR2_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR3 register ********************/ -#define BKP_DR3_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR4 register ********************/ -#define BKP_DR4_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR5 register ********************/ -#define BKP_DR5_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR6 register ********************/ -#define BKP_DR6_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR7 register ********************/ -#define BKP_DR7_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR8 register ********************/ -#define BKP_DR8_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR9 register ********************/ -#define BKP_DR9_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR10 register *******************/ -#define BKP_DR10_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR11 register *******************/ -#define BKP_DR11_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR12 register *******************/ -#define BKP_DR12_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR13 register *******************/ -#define BKP_DR13_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR14 register *******************/ -#define BKP_DR14_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR15 register *******************/ -#define BKP_DR15_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR16 register *******************/ -#define BKP_DR16_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR17 register *******************/ -#define BKP_DR17_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/****************** Bit definition for BKP_DR18 register ********************/ -#define BKP_DR18_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR19 register *******************/ -#define BKP_DR19_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR20 register *******************/ -#define BKP_DR20_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR21 register *******************/ -#define BKP_DR21_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR22 register *******************/ -#define BKP_DR22_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR23 register *******************/ -#define BKP_DR23_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR24 register *******************/ -#define BKP_DR24_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR25 register *******************/ -#define BKP_DR25_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR26 register *******************/ -#define BKP_DR26_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR27 register *******************/ -#define BKP_DR27_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR28 register *******************/ -#define BKP_DR28_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR29 register *******************/ -#define BKP_DR29_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR30 register *******************/ -#define BKP_DR30_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR31 register *******************/ -#define BKP_DR31_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR32 register *******************/ -#define BKP_DR32_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR33 register *******************/ -#define BKP_DR33_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR34 register *******************/ -#define BKP_DR34_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR35 register *******************/ -#define BKP_DR35_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR36 register *******************/ -#define BKP_DR36_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR37 register *******************/ -#define BKP_DR37_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR38 register *******************/ -#define BKP_DR38_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR39 register *******************/ -#define BKP_DR39_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR40 register *******************/ -#define BKP_DR40_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR41 register *******************/ -#define BKP_DR41_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/******************* Bit definition for BKP_DR42 register *******************/ -#define BKP_DR42_D ((uint16_t)0xFFFF) /*!< Backup data */ - -/****************** Bit definition for BKP_RTCCR register *******************/ -#define BKP_RTCCR_CAL ((uint16_t)0x007F) /*!< Calibration value */ -#define BKP_RTCCR_CCO ((uint16_t)0x0080) /*!< Calibration Clock Output */ -#define BKP_RTCCR_ASOE ((uint16_t)0x0100) /*!< Alarm or Second Output Enable */ -#define BKP_RTCCR_ASOS ((uint16_t)0x0200) /*!< Alarm or Second Output Selection */ - -/******************** Bit definition for BKP_CR register ********************/ -#define BKP_CR_TPE ((uint8_t)0x01) /*!< TAMPER pin enable */ -#define BKP_CR_TPAL ((uint8_t)0x02) /*!< TAMPER pin active level */ - -/******************* Bit definition for BKP_CSR register ********************/ -#define BKP_CSR_CTE ((uint16_t)0x0001) /*!< Clear Tamper event */ -#define BKP_CSR_CTI ((uint16_t)0x0002) /*!< Clear Tamper Interrupt */ -#define BKP_CSR_TPIE ((uint16_t)0x0004) /*!< TAMPER Pin interrupt enable */ -#define BKP_CSR_TEF ((uint16_t)0x0100) /*!< Tamper Event Flag */ -#define BKP_CSR_TIF ((uint16_t)0x0200) /*!< Tamper Interrupt Flag */ - -/******************************************************************************/ -/* */ -/* Reset and Clock Control */ -/* */ -/******************************************************************************/ - -/******************** Bit definition for RCC_CR register ********************/ -#define RCC_CR_HSION ((uint32_t)0x00000001) /*!< Internal High Speed clock enable */ -#define RCC_CR_HSIRDY ((uint32_t)0x00000002) /*!< Internal High Speed clock ready flag */ -#define RCC_CR_HSITRIM ((uint32_t)0x000000F8) /*!< Internal High Speed clock trimming */ -#define RCC_CR_HSICAL ((uint32_t)0x0000FF00) /*!< Internal High Speed clock Calibration */ -#define RCC_CR_HSEON ((uint32_t)0x00010000) /*!< External High Speed clock enable */ -#define RCC_CR_HSERDY ((uint32_t)0x00020000) /*!< External High Speed clock ready flag */ -#define RCC_CR_HSEBYP ((uint32_t)0x00040000) /*!< External High Speed clock Bypass */ -#define RCC_CR_CSSON ((uint32_t)0x00080000) /*!< Clock Security System enable */ -#define RCC_CR_PLLON ((uint32_t)0x01000000) /*!< PLL enable */ -#define RCC_CR_PLLRDY ((uint32_t)0x02000000) /*!< PLL clock ready flag */ - -#ifdef STM32F10X_CL - #define RCC_CR_PLL2ON ((uint32_t)0x04000000) /*!< PLL2 enable */ - #define RCC_CR_PLL2RDY ((uint32_t)0x08000000) /*!< PLL2 clock ready flag */ - #define RCC_CR_PLL3ON ((uint32_t)0x10000000) /*!< PLL3 enable */ - #define RCC_CR_PLL3RDY ((uint32_t)0x20000000) /*!< PLL3 clock ready flag */ -#endif /* STM32F10X_CL */ - -/******************* Bit definition for RCC_CFGR register *******************/ -/*!< SW configuration */ -#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */ -#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */ -#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */ - -#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */ -#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */ -#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */ - -/*!< SWS configuration */ -#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */ -#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */ -#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */ - -#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */ -#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */ -#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */ - -/*!< HPRE configuration */ -#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */ -#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */ -#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */ -#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */ -#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */ - -#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */ -#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */ -#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */ -#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */ -#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */ -#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */ -#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */ -#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */ -#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */ - -/*!< PPRE1 configuration */ -#define RCC_CFGR_PPRE1 ((uint32_t)0x00000700) /*!< PRE1[2:0] bits (APB1 prescaler) */ -#define RCC_CFGR_PPRE1_0 ((uint32_t)0x00000100) /*!< Bit 0 */ -#define RCC_CFGR_PPRE1_1 ((uint32_t)0x00000200) /*!< Bit 1 */ -#define RCC_CFGR_PPRE1_2 ((uint32_t)0x00000400) /*!< Bit 2 */ - -#define RCC_CFGR_PPRE1_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */ -#define RCC_CFGR_PPRE1_DIV2 ((uint32_t)0x00000400) /*!< HCLK divided by 2 */ -#define RCC_CFGR_PPRE1_DIV4 ((uint32_t)0x00000500) /*!< HCLK divided by 4 */ -#define RCC_CFGR_PPRE1_DIV8 ((uint32_t)0x00000600) /*!< HCLK divided by 8 */ -#define RCC_CFGR_PPRE1_DIV16 ((uint32_t)0x00000700) /*!< HCLK divided by 16 */ - -/*!< PPRE2 configuration */ -#define RCC_CFGR_PPRE2 ((uint32_t)0x00003800) /*!< PRE2[2:0] bits (APB2 prescaler) */ -#define RCC_CFGR_PPRE2_0 ((uint32_t)0x00000800) /*!< Bit 0 */ -#define RCC_CFGR_PPRE2_1 ((uint32_t)0x00001000) /*!< Bit 1 */ -#define RCC_CFGR_PPRE2_2 ((uint32_t)0x00002000) /*!< Bit 2 */ - -#define RCC_CFGR_PPRE2_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */ -#define RCC_CFGR_PPRE2_DIV2 ((uint32_t)0x00002000) /*!< HCLK divided by 2 */ -#define RCC_CFGR_PPRE2_DIV4 ((uint32_t)0x00002800) /*!< HCLK divided by 4 */ -#define RCC_CFGR_PPRE2_DIV8 ((uint32_t)0x00003000) /*!< HCLK divided by 8 */ -#define RCC_CFGR_PPRE2_DIV16 ((uint32_t)0x00003800) /*!< HCLK divided by 16 */ - -/*!< ADCPPRE configuration */ -#define RCC_CFGR_ADCPRE ((uint32_t)0x0000C000) /*!< ADCPRE[1:0] bits (ADC prescaler) */ -#define RCC_CFGR_ADCPRE_0 ((uint32_t)0x00004000) /*!< Bit 0 */ -#define RCC_CFGR_ADCPRE_1 ((uint32_t)0x00008000) /*!< Bit 1 */ - -#define RCC_CFGR_ADCPRE_DIV2 ((uint32_t)0x00000000) /*!< PCLK2 divided by 2 */ -#define RCC_CFGR_ADCPRE_DIV4 ((uint32_t)0x00004000) /*!< PCLK2 divided by 4 */ -#define RCC_CFGR_ADCPRE_DIV6 ((uint32_t)0x00008000) /*!< PCLK2 divided by 6 */ -#define RCC_CFGR_ADCPRE_DIV8 ((uint32_t)0x0000C000) /*!< PCLK2 divided by 8 */ - -#define RCC_CFGR_PLLSRC ((uint32_t)0x00010000) /*!< PLL entry clock source */ - -#define RCC_CFGR_PLLXTPRE ((uint32_t)0x00020000) /*!< HSE divider for PLL entry */ - -/*!< PLLMUL configuration */ -#define RCC_CFGR_PLLMULL ((uint32_t)0x003C0000) /*!< PLLMUL[3:0] bits (PLL multiplication factor) */ -#define RCC_CFGR_PLLMULL_0 ((uint32_t)0x00040000) /*!< Bit 0 */ -#define RCC_CFGR_PLLMULL_1 ((uint32_t)0x00080000) /*!< Bit 1 */ -#define RCC_CFGR_PLLMULL_2 ((uint32_t)0x00100000) /*!< Bit 2 */ -#define RCC_CFGR_PLLMULL_3 ((uint32_t)0x00200000) /*!< Bit 3 */ - -#ifdef STM32F10X_CL - #define RCC_CFGR_PLLSRC_HSI_Div2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */ - #define RCC_CFGR_PLLSRC_PREDIV1 ((uint32_t)0x00010000) /*!< PREDIV1 clock selected as PLL entry clock source */ - - #define RCC_CFGR_PLLXTPRE_PREDIV1 ((uint32_t)0x00000000) /*!< PREDIV1 clock not divided for PLL entry */ - #define RCC_CFGR_PLLXTPRE_PREDIV1_Div2 ((uint32_t)0x00020000) /*!< PREDIV1 clock divided by 2 for PLL entry */ - - #define RCC_CFGR_PLLMULL4 ((uint32_t)0x00080000) /*!< PLL input clock * 4 */ - #define RCC_CFGR_PLLMULL5 ((uint32_t)0x000C0000) /*!< PLL input clock * 5 */ - #define RCC_CFGR_PLLMULL6 ((uint32_t)0x00100000) /*!< PLL input clock * 6 */ - #define RCC_CFGR_PLLMULL7 ((uint32_t)0x00140000) /*!< PLL input clock * 7 */ - #define RCC_CFGR_PLLMULL8 ((uint32_t)0x00180000) /*!< PLL input clock * 8 */ - #define RCC_CFGR_PLLMULL9 ((uint32_t)0x001C0000) /*!< PLL input clock * 9 */ - #define RCC_CFGR_PLLMULL6_5 ((uint32_t)0x00340000) /*!< PLL input clock * 6.5 */ - - #define RCC_CFGR_OTGFSPRE ((uint32_t)0x00400000) /*!< USB OTG FS prescaler */ - -/*!< MCO configuration */ - #define RCC_CFGR_MCO ((uint32_t)0x0F000000) /*!< MCO[3:0] bits (Microcontroller Clock Output) */ - #define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */ - #define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */ - #define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */ - #define RCC_CFGR_MCO_3 ((uint32_t)0x08000000) /*!< Bit 3 */ - - #define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ - #define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */ - #define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */ - #define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */ - #define RCC_CFGR_MCO_PLLCLK_Div2 ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */ - #define RCC_CFGR_MCO_PLL2CLK ((uint32_t)0x08000000) /*!< PLL2 clock selected as MCO source*/ - #define RCC_CFGR_MCO_PLL3CLK_Div2 ((uint32_t)0x09000000) /*!< PLL3 clock divided by 2 selected as MCO source*/ - #define RCC_CFGR_MCO_Ext_HSE ((uint32_t)0x0A000000) /*!< XT1 external 3-25 MHz oscillator clock selected as MCO source */ - #define RCC_CFGR_MCO_PLL3CLK ((uint32_t)0x0B000000) /*!< PLL3 clock selected as MCO source */ -#else - #define RCC_CFGR_PLLSRC_HSI_Div2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */ - #define RCC_CFGR_PLLSRC_HSE ((uint32_t)0x00010000) /*!< HSE clock selected as PLL entry clock source */ - - #define RCC_CFGR_PLLXTPRE_HSE ((uint32_t)0x00000000) /*!< HSE clock not divided for PLL entry */ - #define RCC_CFGR_PLLXTPRE_HSE_Div2 ((uint32_t)0x00020000) /*!< HSE clock divided by 2 for PLL entry */ - - #define RCC_CFGR_PLLMULL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */ - #define RCC_CFGR_PLLMULL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */ - #define RCC_CFGR_PLLMULL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */ - #define RCC_CFGR_PLLMULL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */ - #define RCC_CFGR_PLLMULL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */ - #define RCC_CFGR_PLLMULL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */ - #define RCC_CFGR_PLLMULL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */ - #define RCC_CFGR_PLLMULL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */ - #define RCC_CFGR_PLLMULL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */ - #define RCC_CFGR_PLLMULL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */ - #define RCC_CFGR_PLLMULL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */ - #define RCC_CFGR_PLLMULL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */ - #define RCC_CFGR_PLLMULL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */ - #define RCC_CFGR_PLLMULL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */ - #define RCC_CFGR_PLLMULL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */ - #define RCC_CFGR_USBPRE ((uint32_t)0x00400000) /*!< USB Device prescaler */ - -/*!< MCO configuration */ - #define RCC_CFGR_MCO ((uint32_t)0x07000000) /*!< MCO[2:0] bits (Microcontroller Clock Output) */ - #define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */ - #define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */ - #define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */ - - #define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ - #define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */ - #define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */ - #define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */ - #define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */ -#endif /* STM32F10X_CL */ - -/*!<****************** Bit definition for RCC_CIR register ********************/ -#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001) /*!< LSI Ready Interrupt flag */ -#define RCC_CIR_LSERDYF ((uint32_t)0x00000002) /*!< LSE Ready Interrupt flag */ -#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004) /*!< HSI Ready Interrupt flag */ -#define RCC_CIR_HSERDYF ((uint32_t)0x00000008) /*!< HSE Ready Interrupt flag */ -#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010) /*!< PLL Ready Interrupt flag */ -#define RCC_CIR_CSSF ((uint32_t)0x00000080) /*!< Clock Security System Interrupt flag */ -#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100) /*!< LSI Ready Interrupt Enable */ -#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200) /*!< LSE Ready Interrupt Enable */ -#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400) /*!< HSI Ready Interrupt Enable */ -#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800) /*!< HSE Ready Interrupt Enable */ -#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000) /*!< PLL Ready Interrupt Enable */ -#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000) /*!< LSI Ready Interrupt Clear */ -#define RCC_CIR_LSERDYC ((uint32_t)0x00020000) /*!< LSE Ready Interrupt Clear */ -#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000) /*!< HSI Ready Interrupt Clear */ -#define RCC_CIR_HSERDYC ((uint32_t)0x00080000) /*!< HSE Ready Interrupt Clear */ -#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000) /*!< PLL Ready Interrupt Clear */ -#define RCC_CIR_CSSC ((uint32_t)0x00800000) /*!< Clock Security System Interrupt Clear */ - -#ifdef STM32F10X_CL - #define RCC_CIR_PLL2RDYF ((uint32_t)0x00000020) /*!< PLL2 Ready Interrupt flag */ - #define RCC_CIR_PLL3RDYF ((uint32_t)0x00000040) /*!< PLL3 Ready Interrupt flag */ - #define RCC_CIR_PLL2RDYIE ((uint32_t)0x00002000) /*!< PLL2 Ready Interrupt Enable */ - #define RCC_CIR_PLL3RDYIE ((uint32_t)0x00004000) /*!< PLL3 Ready Interrupt Enable */ - #define RCC_CIR_PLL2RDYC ((uint32_t)0x00200000) /*!< PLL2 Ready Interrupt Clear */ - #define RCC_CIR_PLL3RDYC ((uint32_t)0x00400000) /*!< PLL3 Ready Interrupt Clear */ -#endif /* STM32F10X_CL */ - -/***************** Bit definition for RCC_APB2RSTR register *****************/ -#define RCC_APB2RSTR_AFIORST ((uint16_t)0x0001) /*!< Alternate Function I/O reset */ -#define RCC_APB2RSTR_IOPARST ((uint16_t)0x0004) /*!< I/O port A reset */ -#define RCC_APB2RSTR_IOPBRST ((uint16_t)0x0008) /*!< I/O port B reset */ -#define RCC_APB2RSTR_IOPCRST ((uint16_t)0x0010) /*!< I/O port C reset */ -#define RCC_APB2RSTR_IOPDRST ((uint16_t)0x0020) /*!< I/O port D reset */ -#define RCC_APB2RSTR_ADC1RST ((uint16_t)0x0200) /*!< ADC 1 interface reset */ -#define RCC_APB2RSTR_ADC2RST ((uint16_t)0x0400) /*!< ADC 2 interface reset */ -#define RCC_APB2RSTR_TIM1RST ((uint16_t)0x0800) /*!< TIM1 Timer reset */ -#define RCC_APB2RSTR_SPI1RST ((uint16_t)0x1000) /*!< SPI 1 reset */ -#define RCC_APB2RSTR_USART1RST ((uint16_t)0x4000) /*!< USART1 reset */ - -#ifndef STM32F10X_LD - #define RCC_APB2RSTR_IOPERST ((uint16_t)0x0040) /*!< I/O port E reset */ -#endif /* STM32F10X_HD */ - -#ifdef STM32F10X_HD - #define RCC_APB2RSTR_IOPFRST ((uint16_t)0x0080) /*!< I/O port F reset */ - #define RCC_APB2RSTR_IOPGRST ((uint16_t)0x0100) /*!< I/O port G reset */ - #define RCC_APB2RSTR_TIM8RST ((uint16_t)0x2000) /*!< TIM8 Timer reset */ - #define RCC_APB2RSTR_ADC3RST ((uint16_t)0x8000) /*!< ADC3 interface reset */ -#endif /* STM32F10X_HD */ - -/***************** Bit definition for RCC_APB1RSTR register *****************/ -#define RCC_APB1RSTR_TIM2RST ((uint32_t)0x00000001) /*!< Timer 2 reset */ -#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002) /*!< Timer 3 reset */ -#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800) /*!< Window Watchdog reset */ -#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000) /*!< USART 2 reset */ -#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000) /*!< I2C 1 reset */ -#define RCC_APB1RSTR_CAN1RST ((uint32_t)0x02000000) /*!< CAN1 reset */ -#define RCC_APB1RSTR_BKPRST ((uint32_t)0x08000000) /*!< Backup interface reset */ -#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000) /*!< Power interface reset */ - -#ifndef STM32F10X_LD - #define RCC_APB1RSTR_TIM4RST ((uint32_t)0x00000004) /*!< Timer 4 reset */ - #define RCC_APB1RSTR_SPI2RST ((uint32_t)0x00004000) /*!< SPI 2 reset */ - #define RCC_APB1RSTR_USART3RST ((uint32_t)0x00040000) /*!< RUSART 3 reset */ - #define RCC_APB1RSTR_I2C2RST ((uint32_t)0x00400000) /*!< I2C 2 reset */ -#endif /* STM32F10X_HD */ - -#if defined (STM32F10X_HD) || defined (STM32F10X_MD) || defined (STM32F10X_LD) - #define RCC_APB1RSTR_USBRST ((uint32_t)0x00800000) /*!< USB Device reset */ -#endif - -#if defined (STM32F10X_HD) || defined (STM32F10X_CL) - #define RCC_APB1RSTR_TIM5RST ((uint32_t)0x00000008) /*!< Timer 5 reset */ - #define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010) /*!< Timer 6 reset */ - #define RCC_APB1RSTR_TIM7RST ((uint32_t)0x00000020) /*!< Timer 7 reset */ - #define RCC_APB1RSTR_SPI3RST ((uint32_t)0x00008000) /*!< SPI 3 reset */ - #define RCC_APB1RSTR_UART4RST ((uint32_t)0x00080000) /*!< UART 4 reset */ - #define RCC_APB1RSTR_UART5RST ((uint32_t)0x00100000) /*!< UART 5 reset */ - #define RCC_APB1RSTR_DACRST ((uint32_t)0x20000000) /*!< DAC interface reset */ -#endif - -#ifdef STM32F10X_CL - #define RCC_APB1RSTR_CAN2RST ((uint32_t)0x08000000) /*!< CAN2 reset */ -#endif /* STM32F10X_CL */ - -/****************** Bit definition for RCC_AHBENR register ******************/ -#define RCC_AHBENR_DMA1EN ((uint16_t)0x0001) /*!< DMA1 clock enable */ -#define RCC_AHBENR_SRAMEN ((uint16_t)0x0004) /*!< SRAM interface clock enable */ -#define RCC_AHBENR_FLITFEN ((uint16_t)0x0010) /*!< FLITF clock enable */ -#define RCC_AHBENR_CRCEN ((uint16_t)0x0040) /*!< CRC clock enable */ - -#if defined (STM32F10X_HD) || defined (STM32F10X_CL) - #define RCC_AHBENR_DMA2EN ((uint16_t)0x0002) /*!< DMA2 clock enable */ -#endif - -#ifdef STM32F10X_HD - #define RCC_AHBENR_FSMCEN ((uint16_t)0x0100) /*!< FSMC clock enable */ - #define RCC_AHBENR_SDIOEN ((uint16_t)0x0400) /*!< SDIO clock enable */ -#endif /* STM32F10X_HD */ - -#ifdef STM32F10X_CL - #define RCC_AHBENR_OTGFSEN ((uint32_t)0x00001000) /*!< USB OTG FS clock enable */ - #define RCC_AHBENR_ETHMACEN ((uint32_t)0x00004000) /*!< ETHERNET MAC clock enable */ - #define RCC_AHBENR_ETHMACTXEN ((uint32_t)0x00008000) /*!< ETHERNET MAC Tx clock enable */ - #define RCC_AHBENR_ETHMACRXEN ((uint32_t)0x00010000) /*!< ETHERNET MAC Rx clock enable */ -#endif /* STM32F10X_CL */ - -/****************** Bit definition for RCC_APB2ENR register *****************/ -#define RCC_APB2ENR_AFIOEN ((uint16_t)0x0001) /*!< Alternate Function I/O clock enable */ -#define RCC_APB2ENR_IOPAEN ((uint16_t)0x0004) /*!< I/O port A clock enable */ -#define RCC_APB2ENR_IOPBEN ((uint16_t)0x0008) /*!< I/O port B clock enable */ -#define RCC_APB2ENR_IOPCEN ((uint16_t)0x0010) /*!< I/O port C clock enable */ -#define RCC_APB2ENR_IOPDEN ((uint16_t)0x0020) /*!< I/O port D clock enable */ -#define RCC_APB2ENR_ADC1EN ((uint16_t)0x0200) /*!< ADC 1 interface clock enable */ -#define RCC_APB2ENR_ADC2EN ((uint16_t)0x0400) /*!< ADC 2 interface clock enable */ -#define RCC_APB2ENR_TIM1EN ((uint16_t)0x0800) /*!< TIM1 Timer clock enable */ -#define RCC_APB2ENR_SPI1EN ((uint16_t)0x1000) /*!< SPI 1 clock enable */ -#define RCC_APB2ENR_USART1EN ((uint16_t)0x4000) /*!< USART1 clock enable */ - -#ifndef STM32F10X_LD - #define RCC_APB2ENR_IOPEEN ((uint16_t)0x0040) /*!< I/O port E clock enable */ -#endif /* STM32F10X_HD */ - -#ifdef STM32F10X_HD - #define RCC_APB2ENR_IOPFEN ((uint16_t)0x0080) /*!< I/O port F clock enable */ - #define RCC_APB2ENR_IOPGEN ((uint16_t)0x0100) /*!< I/O port G clock enable */ - #define RCC_APB2ENR_TIM8EN ((uint16_t)0x2000) /*!< TIM8 Timer clock enable */ - #define RCC_APB2ENR_ADC3EN ((uint16_t)0x8000) /*!< DMA1 clock enable */ -#endif /* STM32F10X_HD */ - -/***************** Bit definition for RCC_APB1ENR register ******************/ -#define RCC_APB1ENR_TIM2EN ((uint32_t)0x00000001) /*!< Timer 2 clock enabled*/ -#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002) /*!< Timer 3 clock enable */ -#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enable */ -#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000) /*!< USART 2 clock enable */ -#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000) /*!< I2C 1 clock enable */ -#define RCC_APB1ENR_CAN1EN ((uint32_t)0x02000000) /*!< CAN1 clock enable */ -#define RCC_APB1ENR_BKPEN ((uint32_t)0x08000000) /*!< Backup interface clock enable */ -#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000) /*!< Power interface clock enable */ - -#ifndef STM32F10X_LD - #define RCC_APB1ENR_TIM4EN ((uint32_t)0x00000004) /*!< Timer 4 clock enable */ - #define RCC_APB1ENR_SPI2EN ((uint32_t)0x00004000) /*!< SPI 2 clock enable */ - #define RCC_APB1ENR_USART3EN ((uint32_t)0x00040000) /*!< USART 3 clock enable */ - #define RCC_APB1ENR_I2C2EN ((uint32_t)0x00400000) /*!< I2C 2 clock enable */ -#endif /* STM32F10X_HD */ - -#if defined (STM32F10X_HD) || defined (STM32F10X_MD) || defined (STM32F10X_LD) - #define RCC_APB1ENR_USBEN ((uint32_t)0x00800000) /*!< USB Device clock enable */ -#endif - -#if defined (STM32F10X_HD) || defined (STM32F10X_CL) - #define RCC_APB1ENR_TIM5EN ((uint32_t)0x00000008) /*!< Timer 5 clock enable */ - #define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010) /*!< Timer 6 clock enable */ - #define RCC_APB1ENR_TIM7EN ((uint32_t)0x00000020) /*!< Timer 7 clock enable */ - #define RCC_APB1ENR_SPI3EN ((uint32_t)0x00008000) /*!< SPI 3 clock enable */ - #define RCC_APB1ENR_UART4EN ((uint32_t)0x00080000) /*!< UART 4 clock enable */ - #define RCC_APB1ENR_UART5EN ((uint32_t)0x00100000) /*!< UART 5 clock enable */ - #define RCC_APB1ENR_DACEN ((uint32_t)0x20000000) /*!< DAC interface clock enable */ -#endif - -#ifdef STM32F10X_CL - #define RCC_APB1ENR_CAN2EN ((uint32_t)0x08000000) /*!< CAN2 clock enable */ -#endif /* STM32F10X_CL */ - -/******************* Bit definition for RCC_BDCR register *******************/ -#define RCC_BDCR_LSEON ((uint32_t)0x00000001) /*!< External Low Speed oscillator enable */ -#define RCC_BDCR_LSERDY ((uint32_t)0x00000002) /*!< External Low Speed oscillator Ready */ -#define RCC_BDCR_LSEBYP ((uint32_t)0x00000004) /*!< External Low Speed oscillator Bypass */ - -#define RCC_BDCR_RTCSEL ((uint32_t)0x00000300) /*!< RTCSEL[1:0] bits (RTC clock source selection) */ -#define RCC_BDCR_RTCSEL_0 ((uint32_t)0x00000100) /*!< Bit 0 */ -#define RCC_BDCR_RTCSEL_1 ((uint32_t)0x00000200) /*!< Bit 1 */ - -/*!< RTC congiguration */ -#define RCC_BDCR_RTCSEL_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ -#define RCC_BDCR_RTCSEL_LSE ((uint32_t)0x00000100) /*!< LSE oscillator clock used as RTC clock */ -#define RCC_BDCR_RTCSEL_LSI ((uint32_t)0x00000200) /*!< LSI oscillator clock used as RTC clock */ -#define RCC_BDCR_RTCSEL_HSE ((uint32_t)0x00000300) /*!< HSE oscillator clock divided by 128 used as RTC clock */ - -#define RCC_BDCR_RTCEN ((uint32_t)0x00008000) /*!< RTC clock enable */ -#define RCC_BDCR_BDRST ((uint32_t)0x00010000) /*!< Backup domain software reset */ - -/******************* Bit definition for RCC_CSR register ********************/ -#define RCC_CSR_LSION ((uint32_t)0x00000001) /*!< Internal Low Speed oscillator enable */ -#define RCC_CSR_LSIRDY ((uint32_t)0x00000002) /*!< Internal Low Speed oscillator Ready */ -#define RCC_CSR_RMVF ((uint32_t)0x01000000) /*!< Remove reset flag */ -#define RCC_CSR_PINRSTF ((uint32_t)0x04000000) /*!< PIN reset flag */ -#define RCC_CSR_PORRSTF ((uint32_t)0x08000000) /*!< POR/PDR reset flag */ -#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000) /*!< Software Reset flag */ -#define RCC_CSR_IWDGRSTF ((uint32_t)0x20000000) /*!< Independent Watchdog reset flag */ -#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000) /*!< Window watchdog reset flag */ -#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000) /*!< Low-Power reset flag */ - -#ifdef STM32F10X_CL -/******************* Bit definition for RCC_AHBRSTR register ****************/ - #define RCC_AHBRSTR_OTGFSRST ((uint32_t)0x00001000) /*!< USB OTG FS reset */ - #define RCC_AHBRSTR_ETHMACRST ((uint32_t)0x00004000) /*!< ETHERNET MAC reset */ - -/******************* Bit definition for RCC_CFGR2 register ******************/ -/*!< PREDIV1 configuration */ - #define RCC_CFGR2_PREDIV1 ((uint32_t)0x0000000F) /*!< PREDIV1[3:0] bits */ - #define RCC_CFGR2_PREDIV1_0 ((uint32_t)0x00000001) /*!< Bit 0 */ - #define RCC_CFGR2_PREDIV1_1 ((uint32_t)0x00000002) /*!< Bit 1 */ - #define RCC_CFGR2_PREDIV1_2 ((uint32_t)0x00000004) /*!< Bit 2 */ - #define RCC_CFGR2_PREDIV1_3 ((uint32_t)0x00000008) /*!< Bit 3 */ - - #define RCC_CFGR2_PREDIV1_DIV1 ((uint32_t)0x00000000) /*!< PREDIV1 input clock not divided */ - #define RCC_CFGR2_PREDIV1_DIV2 ((uint32_t)0x00000001) /*!< PREDIV1 input clock divided by 2 */ - #define RCC_CFGR2_PREDIV1_DIV3 ((uint32_t)0x00000002) /*!< PREDIV1 input clock divided by 3 */ - #define RCC_CFGR2_PREDIV1_DIV4 ((uint32_t)0x00000003) /*!< PREDIV1 input clock divided by 4 */ - #define RCC_CFGR2_PREDIV1_DIV5 ((uint32_t)0x00000004) /*!< PREDIV1 input clock divided by 5 */ - #define RCC_CFGR2_PREDIV1_DIV6 ((uint32_t)0x00000005) /*!< PREDIV1 input clock divided by 6 */ - #define RCC_CFGR2_PREDIV1_DIV7 ((uint32_t)0x00000006) /*!< PREDIV1 input clock divided by 7 */ - #define RCC_CFGR2_PREDIV1_DIV8 ((uint32_t)0x00000007) /*!< PREDIV1 input clock divided by 8 */ - #define RCC_CFGR2_PREDIV1_DIV9 ((uint32_t)0x00000008) /*!< PREDIV1 input clock divided by 9 */ - #define RCC_CFGR2_PREDIV1_DIV10 ((uint32_t)0x00000009) /*!< PREDIV1 input clock divided by 10 */ - #define RCC_CFGR2_PREDIV1_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV1 input clock divided by 11 */ - #define RCC_CFGR2_PREDIV1_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV1 input clock divided by 12 */ - #define RCC_CFGR2_PREDIV1_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV1 input clock divided by 13 */ - #define RCC_CFGR2_PREDIV1_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV1 input clock divided by 14 */ - #define RCC_CFGR2_PREDIV1_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV1 input clock divided by 15 */ - #define RCC_CFGR2_PREDIV1_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV1 input clock divided by 16 */ - -/*!< PREDIV2 configuration */ - #define RCC_CFGR2_PREDIV2 ((uint32_t)0x000000F0) /*!< PREDIV2[3:0] bits */ - #define RCC_CFGR2_PREDIV2_0 ((uint32_t)0x00000010) /*!< Bit 0 */ - #define RCC_CFGR2_PREDIV2_1 ((uint32_t)0x00000020) /*!< Bit 1 */ - #define RCC_CFGR2_PREDIV2_2 ((uint32_t)0x00000040) /*!< Bit 2 */ - #define RCC_CFGR2_PREDIV2_3 ((uint32_t)0x00000080) /*!< Bit 3 */ - - #define RCC_CFGR2_PREDIV2_DIV1 ((uint32_t)0x00000000) /*!< PREDIV2 input clock not divided */ - #define RCC_CFGR2_PREDIV2_DIV2 ((uint32_t)0x00000010) /*!< PREDIV2 input clock divided by 2 */ - #define RCC_CFGR2_PREDIV2_DIV3 ((uint32_t)0x00000020) /*!< PREDIV2 input clock divided by 3 */ - #define RCC_CFGR2_PREDIV2_DIV4 ((uint32_t)0x00000030) /*!< PREDIV2 input clock divided by 4 */ - #define RCC_CFGR2_PREDIV2_DIV5 ((uint32_t)0x00000040) /*!< PREDIV2 input clock divided by 5 */ - #define RCC_CFGR2_PREDIV2_DIV6 ((uint32_t)0x00000050) /*!< PREDIV2 input clock divided by 6 */ - #define RCC_CFGR2_PREDIV2_DIV7 ((uint32_t)0x00000060) /*!< PREDIV2 input clock divided by 7 */ - #define RCC_CFGR2_PREDIV2_DIV8 ((uint32_t)0x00000070) /*!< PREDIV2 input clock divided by 8 */ - #define RCC_CFGR2_PREDIV2_DIV9 ((uint32_t)0x00000080) /*!< PREDIV2 input clock divided by 9 */ - #define RCC_CFGR2_PREDIV2_DIV10 ((uint32_t)0x00000090) /*!< PREDIV2 input clock divided by 10 */ - #define RCC_CFGR2_PREDIV2_DIV11 ((uint32_t)0x000000A0) /*!< PREDIV2 input clock divided by 11 */ - #define RCC_CFGR2_PREDIV2_DIV12 ((uint32_t)0x000000B0) /*!< PREDIV2 input clock divided by 12 */ - #define RCC_CFGR2_PREDIV2_DIV13 ((uint32_t)0x000000C0) /*!< PREDIV2 input clock divided by 13 */ - #define RCC_CFGR2_PREDIV2_DIV14 ((uint32_t)0x000000D0) /*!< PREDIV2 input clock divided by 14 */ - #define RCC_CFGR2_PREDIV2_DIV15 ((uint32_t)0x000000E0) /*!< PREDIV2 input clock divided by 15 */ - #define RCC_CFGR2_PREDIV2_DIV16 ((uint32_t)0x000000F0) /*!< PREDIV2 input clock divided by 16 */ - -/*!< PLL2MUL configuration */ - #define RCC_CFGR2_PLL2MUL ((uint32_t)0x00000F00) /*!< PLL2MUL[3:0] bits */ - #define RCC_CFGR2_PLL2MUL_0 ((uint32_t)0x00000100) /*!< Bit 0 */ - #define RCC_CFGR2_PLL2MUL_1 ((uint32_t)0x00000200) /*!< Bit 1 */ - #define RCC_CFGR2_PLL2MUL_2 ((uint32_t)0x00000400) /*!< Bit 2 */ - #define RCC_CFGR2_PLL2MUL_3 ((uint32_t)0x00000800) /*!< Bit 3 */ - - #define RCC_CFGR2_PLL2MUL8 ((uint32_t)0x00000600) /*!< PLL2 input clock * 8 */ - #define RCC_CFGR2_PLL2MUL9 ((uint32_t)0x00000700) /*!< PLL2 input clock * 9 */ - #define RCC_CFGR2_PLL2MUL10 ((uint32_t)0x00000800) /*!< PLL2 input clock * 10 */ - #define RCC_CFGR2_PLL2MUL11 ((uint32_t)0x00000900) /*!< PLL2 input clock * 11 */ - #define RCC_CFGR2_PLL2MUL12 ((uint32_t)0x00000A00) /*!< PLL2 input clock * 12 */ - #define RCC_CFGR2_PLL2MUL13 ((uint32_t)0x00000B00) /*!< PLL2 input clock * 13 */ - #define RCC_CFGR2_PLL2MUL14 ((uint32_t)0x00000C00) /*!< PLL2 input clock * 14 */ - #define RCC_CFGR2_PLL2MUL16 ((uint32_t)0x00000E00) /*!< PLL2 input clock * 16 */ - #define RCC_CFGR2_PLL2MUL20 ((uint32_t)0x00000F00) /*!< PLL2 input clock * 20 */ - -/*!< PLL3MUL configuration */ - #define RCC_CFGR2_PLL3MUL ((uint32_t)0x0000F000) /*!< PLL3MUL[3:0] bits */ - #define RCC_CFGR2_PLL3MUL_0 ((uint32_t)0x00001000) /*!< Bit 0 */ - #define RCC_CFGR2_PLL3MUL_1 ((uint32_t)0x00002000) /*!< Bit 1 */ - #define RCC_CFGR2_PLL3MUL_2 ((uint32_t)0x00004000) /*!< Bit 2 */ - #define RCC_CFGR2_PLL3MUL_3 ((uint32_t)0x00008000) /*!< Bit 3 */ - - #define RCC_CFGR2_PLL3MUL8 ((uint32_t)0x00006000) /*!< PLL3 input clock * 8 */ - #define RCC_CFGR2_PLL3MUL9 ((uint32_t)0x00007000) /*!< PLL3 input clock * 9 */ - #define RCC_CFGR2_PLL3MUL10 ((uint32_t)0x00008000) /*!< PLL3 input clock * 10 */ - #define RCC_CFGR2_PLL3MUL11 ((uint32_t)0x00009000) /*!< PLL3 input clock * 11 */ - #define RCC_CFGR2_PLL3MUL12 ((uint32_t)0x0000A000) /*!< PLL3 input clock * 12 */ - #define RCC_CFGR2_PLL3MUL13 ((uint32_t)0x0000B000) /*!< PLL3 input clock * 13 */ - #define RCC_CFGR2_PLL3MUL14 ((uint32_t)0x0000C000) /*!< PLL3 input clock * 14 */ - #define RCC_CFGR2_PLL3MUL16 ((uint32_t)0x0000E000) /*!< PLL3 input clock * 16 */ - #define RCC_CFGR2_PLL3MUL20 ((uint32_t)0x0000F000) /*!< PLL3 input clock * 20 */ - - #define RCC_CFGR2_PREDIV1SRC ((uint32_t)0x00010000) /*!< PREDIV1 entry clock source */ - #define RCC_CFGR2_PREDIV1SRC_PLL2 ((uint32_t)0x00010000) /*!< PLL2 selected as PREDIV1 entry clock source */ - #define RCC_CFGR2_PREDIV1SRC_HSE ((uint32_t)0x00000000) /*!< HSE selected as PREDIV1 entry clock source */ - #define RCC_CFGR2_I2S2SRC ((uint32_t)0x00020000) /*!< I2S2 entry clock source */ - #define RCC_CFGR2_I2S3SRC ((uint32_t)0x00040000) /*!< I2S3 clock source */ -#endif /* STM32F10X_CL */ - -/******************************************************************************/ -/* */ -/* General Purpose and Alternate Function I/O */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for GPIO_CRL register *******************/ -#define GPIO_CRL_MODE ((uint32_t)0x33333333) /*!< Port x mode bits */ - -#define GPIO_CRL_MODE0 ((uint32_t)0x00000003) /*!< MODE0[1:0] bits (Port x mode bits, pin 0) */ -#define GPIO_CRL_MODE0_0 ((uint32_t)0x00000001) /*!< Bit 0 */ -#define GPIO_CRL_MODE0_1 ((uint32_t)0x00000002) /*!< Bit 1 */ - -#define GPIO_CRL_MODE1 ((uint32_t)0x00000030) /*!< MODE1[1:0] bits (Port x mode bits, pin 1) */ -#define GPIO_CRL_MODE1_0 ((uint32_t)0x00000010) /*!< Bit 0 */ -#define GPIO_CRL_MODE1_1 ((uint32_t)0x00000020) /*!< Bit 1 */ - -#define GPIO_CRL_MODE2 ((uint32_t)0x00000300) /*!< MODE2[1:0] bits (Port x mode bits, pin 2) */ -#define GPIO_CRL_MODE2_0 ((uint32_t)0x00000100) /*!< Bit 0 */ -#define GPIO_CRL_MODE2_1 ((uint32_t)0x00000200) /*!< Bit 1 */ - -#define GPIO_CRL_MODE3 ((uint32_t)0x00003000) /*!< MODE3[1:0] bits (Port x mode bits, pin 3) */ -#define GPIO_CRL_MODE3_0 ((uint32_t)0x00001000) /*!< Bit 0 */ -#define GPIO_CRL_MODE3_1 ((uint32_t)0x00002000) /*!< Bit 1 */ - -#define GPIO_CRL_MODE4 ((uint32_t)0x00030000) /*!< MODE4[1:0] bits (Port x mode bits, pin 4) */ -#define GPIO_CRL_MODE4_0 ((uint32_t)0x00010000) /*!< Bit 0 */ -#define GPIO_CRL_MODE4_1 ((uint32_t)0x00020000) /*!< Bit 1 */ - -#define GPIO_CRL_MODE5 ((uint32_t)0x00300000) /*!< MODE5[1:0] bits (Port x mode bits, pin 5) */ -#define GPIO_CRL_MODE5_0 ((uint32_t)0x00100000) /*!< Bit 0 */ -#define GPIO_CRL_MODE5_1 ((uint32_t)0x00200000) /*!< Bit 1 */ - -#define GPIO_CRL_MODE6 ((uint32_t)0x03000000) /*!< MODE6[1:0] bits (Port x mode bits, pin 6) */ -#define GPIO_CRL_MODE6_0 ((uint32_t)0x01000000) /*!< Bit 0 */ -#define GPIO_CRL_MODE6_1 ((uint32_t)0x02000000) /*!< Bit 1 */ - -#define GPIO_CRL_MODE7 ((uint32_t)0x30000000) /*!< MODE7[1:0] bits (Port x mode bits, pin 7) */ -#define GPIO_CRL_MODE7_0 ((uint32_t)0x10000000) /*!< Bit 0 */ -#define GPIO_CRL_MODE7_1 ((uint32_t)0x20000000) /*!< Bit 1 */ - -#define GPIO_CRL_CNF ((uint32_t)0xCCCCCCCC) /*!< Port x configuration bits */ - -#define GPIO_CRL_CNF0 ((uint32_t)0x0000000C) /*!< CNF0[1:0] bits (Port x configuration bits, pin 0) */ -#define GPIO_CRL_CNF0_0 ((uint32_t)0x00000004) /*!< Bit 0 */ -#define GPIO_CRL_CNF0_1 ((uint32_t)0x00000008) /*!< Bit 1 */ - -#define GPIO_CRL_CNF1 ((uint32_t)0x000000C0) /*!< CNF1[1:0] bits (Port x configuration bits, pin 1) */ -#define GPIO_CRL_CNF1_0 ((uint32_t)0x00000040) /*!< Bit 0 */ -#define GPIO_CRL_CNF1_1 ((uint32_t)0x00000080) /*!< Bit 1 */ - -#define GPIO_CRL_CNF2 ((uint32_t)0x00000C00) /*!< CNF2[1:0] bits (Port x configuration bits, pin 2) */ -#define GPIO_CRL_CNF2_0 ((uint32_t)0x00000400) /*!< Bit 0 */ -#define GPIO_CRL_CNF2_1 ((uint32_t)0x00000800) /*!< Bit 1 */ - -#define GPIO_CRL_CNF3 ((uint32_t)0x0000C000) /*!< CNF3[1:0] bits (Port x configuration bits, pin 3) */ -#define GPIO_CRL_CNF3_0 ((uint32_t)0x00004000) /*!< Bit 0 */ -#define GPIO_CRL_CNF3_1 ((uint32_t)0x00008000) /*!< Bit 1 */ - -#define GPIO_CRL_CNF4 ((uint32_t)0x000C0000) /*!< CNF4[1:0] bits (Port x configuration bits, pin 4) */ -#define GPIO_CRL_CNF4_0 ((uint32_t)0x00040000) /*!< Bit 0 */ -#define GPIO_CRL_CNF4_1 ((uint32_t)0x00080000) /*!< Bit 1 */ - -#define GPIO_CRL_CNF5 ((uint32_t)0x00C00000) /*!< CNF5[1:0] bits (Port x configuration bits, pin 5) */ -#define GPIO_CRL_CNF5_0 ((uint32_t)0x00400000) /*!< Bit 0 */ -#define GPIO_CRL_CNF5_1 ((uint32_t)0x00800000) /*!< Bit 1 */ - -#define GPIO_CRL_CNF6 ((uint32_t)0x0C000000) /*!< CNF6[1:0] bits (Port x configuration bits, pin 6) */ -#define GPIO_CRL_CNF6_0 ((uint32_t)0x04000000) /*!< Bit 0 */ -#define GPIO_CRL_CNF6_1 ((uint32_t)0x08000000) /*!< Bit 1 */ - -#define GPIO_CRL_CNF7 ((uint32_t)0xC0000000) /*!< CNF7[1:0] bits (Port x configuration bits, pin 7) */ -#define GPIO_CRL_CNF7_0 ((uint32_t)0x40000000) /*!< Bit 0 */ -#define GPIO_CRL_CNF7_1 ((uint32_t)0x80000000) /*!< Bit 1 */ - -/******************* Bit definition for GPIO_CRH register *******************/ -#define GPIO_CRH_MODE ((uint32_t)0x33333333) /*!< Port x mode bits */ - -#define GPIO_CRH_MODE8 ((uint32_t)0x00000003) /*!< MODE8[1:0] bits (Port x mode bits, pin 8) */ -#define GPIO_CRH_MODE8_0 ((uint32_t)0x00000001) /*!< Bit 0 */ -#define GPIO_CRH_MODE8_1 ((uint32_t)0x00000002) /*!< Bit 1 */ - -#define GPIO_CRH_MODE9 ((uint32_t)0x00000030) /*!< MODE9[1:0] bits (Port x mode bits, pin 9) */ -#define GPIO_CRH_MODE9_0 ((uint32_t)0x00000010) /*!< Bit 0 */ -#define GPIO_CRH_MODE9_1 ((uint32_t)0x00000020) /*!< Bit 1 */ - -#define GPIO_CRH_MODE10 ((uint32_t)0x00000300) /*!< MODE10[1:0] bits (Port x mode bits, pin 10) */ -#define GPIO_CRH_MODE10_0 ((uint32_t)0x00000100) /*!< Bit 0 */ -#define GPIO_CRH_MODE10_1 ((uint32_t)0x00000200) /*!< Bit 1 */ - -#define GPIO_CRH_MODE11 ((uint32_t)0x00003000) /*!< MODE11[1:0] bits (Port x mode bits, pin 11) */ -#define GPIO_CRH_MODE11_0 ((uint32_t)0x00001000) /*!< Bit 0 */ -#define GPIO_CRH_MODE11_1 ((uint32_t)0x00002000) /*!< Bit 1 */ - -#define GPIO_CRH_MODE12 ((uint32_t)0x00030000) /*!< MODE12[1:0] bits (Port x mode bits, pin 12) */ -#define GPIO_CRH_MODE12_0 ((uint32_t)0x00010000) /*!< Bit 0 */ -#define GPIO_CRH_MODE12_1 ((uint32_t)0x00020000) /*!< Bit 1 */ - -#define GPIO_CRH_MODE13 ((uint32_t)0x00300000) /*!< MODE13[1:0] bits (Port x mode bits, pin 13) */ -#define GPIO_CRH_MODE13_0 ((uint32_t)0x00100000) /*!< Bit 0 */ -#define GPIO_CRH_MODE13_1 ((uint32_t)0x00200000) /*!< Bit 1 */ - -#define GPIO_CRH_MODE14 ((uint32_t)0x03000000) /*!< MODE14[1:0] bits (Port x mode bits, pin 14) */ -#define GPIO_CRH_MODE14_0 ((uint32_t)0x01000000) /*!< Bit 0 */ -#define GPIO_CRH_MODE14_1 ((uint32_t)0x02000000) /*!< Bit 1 */ - -#define GPIO_CRH_MODE15 ((uint32_t)0x30000000) /*!< MODE15[1:0] bits (Port x mode bits, pin 15) */ -#define GPIO_CRH_MODE15_0 ((uint32_t)0x10000000) /*!< Bit 0 */ -#define GPIO_CRH_MODE15_1 ((uint32_t)0x20000000) /*!< Bit 1 */ - -#define GPIO_CRH_CNF ((uint32_t)0xCCCCCCCC) /*!< Port x configuration bits */ - -#define GPIO_CRH_CNF8 ((uint32_t)0x0000000C) /*!< CNF8[1:0] bits (Port x configuration bits, pin 8) */ -#define GPIO_CRH_CNF8_0 ((uint32_t)0x00000004) /*!< Bit 0 */ -#define GPIO_CRH_CNF8_1 ((uint32_t)0x00000008) /*!< Bit 1 */ - -#define GPIO_CRH_CNF9 ((uint32_t)0x000000C0) /*!< CNF9[1:0] bits (Port x configuration bits, pin 9) */ -#define GPIO_CRH_CNF9_0 ((uint32_t)0x00000040) /*!< Bit 0 */ -#define GPIO_CRH_CNF9_1 ((uint32_t)0x00000080) /*!< Bit 1 */ - -#define GPIO_CRH_CNF10 ((uint32_t)0x00000C00) /*!< CNF10[1:0] bits (Port x configuration bits, pin 10) */ -#define GPIO_CRH_CNF10_0 ((uint32_t)0x00000400) /*!< Bit 0 */ -#define GPIO_CRH_CNF10_1 ((uint32_t)0x00000800) /*!< Bit 1 */ - -#define GPIO_CRH_CNF11 ((uint32_t)0x0000C000) /*!< CNF11[1:0] bits (Port x configuration bits, pin 11) */ -#define GPIO_CRH_CNF11_0 ((uint32_t)0x00004000) /*!< Bit 0 */ -#define GPIO_CRH_CNF11_1 ((uint32_t)0x00008000) /*!< Bit 1 */ - -#define GPIO_CRH_CNF12 ((uint32_t)0x000C0000) /*!< CNF12[1:0] bits (Port x configuration bits, pin 12) */ -#define GPIO_CRH_CNF12_0 ((uint32_t)0x00040000) /*!< Bit 0 */ -#define GPIO_CRH_CNF12_1 ((uint32_t)0x00080000) /*!< Bit 1 */ - -#define GPIO_CRH_CNF13 ((uint32_t)0x00C00000) /*!< CNF13[1:0] bits (Port x configuration bits, pin 13) */ -#define GPIO_CRH_CNF13_0 ((uint32_t)0x00400000) /*!< Bit 0 */ -#define GPIO_CRH_CNF13_1 ((uint32_t)0x00800000) /*!< Bit 1 */ - -#define GPIO_CRH_CNF14 ((uint32_t)0x0C000000) /*!< CNF14[1:0] bits (Port x configuration bits, pin 14) */ -#define GPIO_CRH_CNF14_0 ((uint32_t)0x04000000) /*!< Bit 0 */ -#define GPIO_CRH_CNF14_1 ((uint32_t)0x08000000) /*!< Bit 1 */ - -#define GPIO_CRH_CNF15 ((uint32_t)0xC0000000) /*!< CNF15[1:0] bits (Port x configuration bits, pin 15) */ -#define GPIO_CRH_CNF15_0 ((uint32_t)0x40000000) /*!< Bit 0 */ -#define GPIO_CRH_CNF15_1 ((uint32_t)0x80000000) /*!< Bit 1 */ - -/*!<****************** Bit definition for GPIO_IDR register *******************/ -#define GPIO_IDR_IDR0 ((uint16_t)0x0001) /*!< Port input data, bit 0 */ -#define GPIO_IDR_IDR1 ((uint16_t)0x0002) /*!< Port input data, bit 1 */ -#define GPIO_IDR_IDR2 ((uint16_t)0x0004) /*!< Port input data, bit 2 */ -#define GPIO_IDR_IDR3 ((uint16_t)0x0008) /*!< Port input data, bit 3 */ -#define GPIO_IDR_IDR4 ((uint16_t)0x0010) /*!< Port input data, bit 4 */ -#define GPIO_IDR_IDR5 ((uint16_t)0x0020) /*!< Port input data, bit 5 */ -#define GPIO_IDR_IDR6 ((uint16_t)0x0040) /*!< Port input data, bit 6 */ -#define GPIO_IDR_IDR7 ((uint16_t)0x0080) /*!< Port input data, bit 7 */ -#define GPIO_IDR_IDR8 ((uint16_t)0x0100) /*!< Port input data, bit 8 */ -#define GPIO_IDR_IDR9 ((uint16_t)0x0200) /*!< Port input data, bit 9 */ -#define GPIO_IDR_IDR10 ((uint16_t)0x0400) /*!< Port input data, bit 10 */ -#define GPIO_IDR_IDR11 ((uint16_t)0x0800) /*!< Port input data, bit 11 */ -#define GPIO_IDR_IDR12 ((uint16_t)0x1000) /*!< Port input data, bit 12 */ -#define GPIO_IDR_IDR13 ((uint16_t)0x2000) /*!< Port input data, bit 13 */ -#define GPIO_IDR_IDR14 ((uint16_t)0x4000) /*!< Port input data, bit 14 */ -#define GPIO_IDR_IDR15 ((uint16_t)0x8000) /*!< Port input data, bit 15 */ - -/******************* Bit definition for GPIO_ODR register *******************/ -#define GPIO_ODR_ODR0 ((uint16_t)0x0001) /*!< Port output data, bit 0 */ -#define GPIO_ODR_ODR1 ((uint16_t)0x0002) /*!< Port output data, bit 1 */ -#define GPIO_ODR_ODR2 ((uint16_t)0x0004) /*!< Port output data, bit 2 */ -#define GPIO_ODR_ODR3 ((uint16_t)0x0008) /*!< Port output data, bit 3 */ -#define GPIO_ODR_ODR4 ((uint16_t)0x0010) /*!< Port output data, bit 4 */ -#define GPIO_ODR_ODR5 ((uint16_t)0x0020) /*!< Port output data, bit 5 */ -#define GPIO_ODR_ODR6 ((uint16_t)0x0040) /*!< Port output data, bit 6 */ -#define GPIO_ODR_ODR7 ((uint16_t)0x0080) /*!< Port output data, bit 7 */ -#define GPIO_ODR_ODR8 ((uint16_t)0x0100) /*!< Port output data, bit 8 */ -#define GPIO_ODR_ODR9 ((uint16_t)0x0200) /*!< Port output data, bit 9 */ -#define GPIO_ODR_ODR10 ((uint16_t)0x0400) /*!< Port output data, bit 10 */ -#define GPIO_ODR_ODR11 ((uint16_t)0x0800) /*!< Port output data, bit 11 */ -#define GPIO_ODR_ODR12 ((uint16_t)0x1000) /*!< Port output data, bit 12 */ -#define GPIO_ODR_ODR13 ((uint16_t)0x2000) /*!< Port output data, bit 13 */ -#define GPIO_ODR_ODR14 ((uint16_t)0x4000) /*!< Port output data, bit 14 */ -#define GPIO_ODR_ODR15 ((uint16_t)0x8000) /*!< Port output data, bit 15 */ - -/****************** Bit definition for GPIO_BSRR register *******************/ -#define GPIO_BSRR_BS0 ((uint32_t)0x00000001) /*!< Port x Set bit 0 */ -#define GPIO_BSRR_BS1 ((uint32_t)0x00000002) /*!< Port x Set bit 1 */ -#define GPIO_BSRR_BS2 ((uint32_t)0x00000004) /*!< Port x Set bit 2 */ -#define GPIO_BSRR_BS3 ((uint32_t)0x00000008) /*!< Port x Set bit 3 */ -#define GPIO_BSRR_BS4 ((uint32_t)0x00000010) /*!< Port x Set bit 4 */ -#define GPIO_BSRR_BS5 ((uint32_t)0x00000020) /*!< Port x Set bit 5 */ -#define GPIO_BSRR_BS6 ((uint32_t)0x00000040) /*!< Port x Set bit 6 */ -#define GPIO_BSRR_BS7 ((uint32_t)0x00000080) /*!< Port x Set bit 7 */ -#define GPIO_BSRR_BS8 ((uint32_t)0x00000100) /*!< Port x Set bit 8 */ -#define GPIO_BSRR_BS9 ((uint32_t)0x00000200) /*!< Port x Set bit 9 */ -#define GPIO_BSRR_BS10 ((uint32_t)0x00000400) /*!< Port x Set bit 10 */ -#define GPIO_BSRR_BS11 ((uint32_t)0x00000800) /*!< Port x Set bit 11 */ -#define GPIO_BSRR_BS12 ((uint32_t)0x00001000) /*!< Port x Set bit 12 */ -#define GPIO_BSRR_BS13 ((uint32_t)0x00002000) /*!< Port x Set bit 13 */ -#define GPIO_BSRR_BS14 ((uint32_t)0x00004000) /*!< Port x Set bit 14 */ -#define GPIO_BSRR_BS15 ((uint32_t)0x00008000) /*!< Port x Set bit 15 */ - -#define GPIO_BSRR_BR0 ((uint32_t)0x00010000) /*!< Port x Reset bit 0 */ -#define GPIO_BSRR_BR1 ((uint32_t)0x00020000) /*!< Port x Reset bit 1 */ -#define GPIO_BSRR_BR2 ((uint32_t)0x00040000) /*!< Port x Reset bit 2 */ -#define GPIO_BSRR_BR3 ((uint32_t)0x00080000) /*!< Port x Reset bit 3 */ -#define GPIO_BSRR_BR4 ((uint32_t)0x00100000) /*!< Port x Reset bit 4 */ -#define GPIO_BSRR_BR5 ((uint32_t)0x00200000) /*!< Port x Reset bit 5 */ -#define GPIO_BSRR_BR6 ((uint32_t)0x00400000) /*!< Port x Reset bit 6 */ -#define GPIO_BSRR_BR7 ((uint32_t)0x00800000) /*!< Port x Reset bit 7 */ -#define GPIO_BSRR_BR8 ((uint32_t)0x01000000) /*!< Port x Reset bit 8 */ -#define GPIO_BSRR_BR9 ((uint32_t)0x02000000) /*!< Port x Reset bit 9 */ -#define GPIO_BSRR_BR10 ((uint32_t)0x04000000) /*!< Port x Reset bit 10 */ -#define GPIO_BSRR_BR11 ((uint32_t)0x08000000) /*!< Port x Reset bit 11 */ -#define GPIO_BSRR_BR12 ((uint32_t)0x10000000) /*!< Port x Reset bit 12 */ -#define GPIO_BSRR_BR13 ((uint32_t)0x20000000) /*!< Port x Reset bit 13 */ -#define GPIO_BSRR_BR14 ((uint32_t)0x40000000) /*!< Port x Reset bit 14 */ -#define GPIO_BSRR_BR15 ((uint32_t)0x80000000) /*!< Port x Reset bit 15 */ - -/******************* Bit definition for GPIO_BRR register *******************/ -#define GPIO_BRR_BR0 ((uint16_t)0x0001) /*!< Port x Reset bit 0 */ -#define GPIO_BRR_BR1 ((uint16_t)0x0002) /*!< Port x Reset bit 1 */ -#define GPIO_BRR_BR2 ((uint16_t)0x0004) /*!< Port x Reset bit 2 */ -#define GPIO_BRR_BR3 ((uint16_t)0x0008) /*!< Port x Reset bit 3 */ -#define GPIO_BRR_BR4 ((uint16_t)0x0010) /*!< Port x Reset bit 4 */ -#define GPIO_BRR_BR5 ((uint16_t)0x0020) /*!< Port x Reset bit 5 */ -#define GPIO_BRR_BR6 ((uint16_t)0x0040) /*!< Port x Reset bit 6 */ -#define GPIO_BRR_BR7 ((uint16_t)0x0080) /*!< Port x Reset bit 7 */ -#define GPIO_BRR_BR8 ((uint16_t)0x0100) /*!< Port x Reset bit 8 */ -#define GPIO_BRR_BR9 ((uint16_t)0x0200) /*!< Port x Reset bit 9 */ -#define GPIO_BRR_BR10 ((uint16_t)0x0400) /*!< Port x Reset bit 10 */ -#define GPIO_BRR_BR11 ((uint16_t)0x0800) /*!< Port x Reset bit 11 */ -#define GPIO_BRR_BR12 ((uint16_t)0x1000) /*!< Port x Reset bit 12 */ -#define GPIO_BRR_BR13 ((uint16_t)0x2000) /*!< Port x Reset bit 13 */ -#define GPIO_BRR_BR14 ((uint16_t)0x4000) /*!< Port x Reset bit 14 */ -#define GPIO_BRR_BR15 ((uint16_t)0x8000) /*!< Port x Reset bit 15 */ - -/****************** Bit definition for GPIO_LCKR register *******************/ -#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001) /*!< Port x Lock bit 0 */ -#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002) /*!< Port x Lock bit 1 */ -#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004) /*!< Port x Lock bit 2 */ -#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008) /*!< Port x Lock bit 3 */ -#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010) /*!< Port x Lock bit 4 */ -#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020) /*!< Port x Lock bit 5 */ -#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040) /*!< Port x Lock bit 6 */ -#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080) /*!< Port x Lock bit 7 */ -#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100) /*!< Port x Lock bit 8 */ -#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200) /*!< Port x Lock bit 9 */ -#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400) /*!< Port x Lock bit 10 */ -#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800) /*!< Port x Lock bit 11 */ -#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000) /*!< Port x Lock bit 12 */ -#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000) /*!< Port x Lock bit 13 */ -#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000) /*!< Port x Lock bit 14 */ -#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000) /*!< Port x Lock bit 15 */ -#define GPIO_LCKR_LCKK ((uint32_t)0x00010000) /*!< Lock key */ - -/*----------------------------------------------------------------------------*/ - -/****************** Bit definition for AFIO_EVCR register *******************/ -#define AFIO_EVCR_PIN ((uint8_t)0x0F) /*!< PIN[3:0] bits (Pin selection) */ -#define AFIO_EVCR_PIN_0 ((uint8_t)0x01) /*!< Bit 0 */ -#define AFIO_EVCR_PIN_1 ((uint8_t)0x02) /*!< Bit 1 */ -#define AFIO_EVCR_PIN_2 ((uint8_t)0x04) /*!< Bit 2 */ -#define AFIO_EVCR_PIN_3 ((uint8_t)0x08) /*!< Bit 3 */ - -/*!< PIN configuration */ -#define AFIO_EVCR_PIN_PX0 ((uint8_t)0x00) /*!< Pin 0 selected */ -#define AFIO_EVCR_PIN_PX1 ((uint8_t)0x01) /*!< Pin 1 selected */ -#define AFIO_EVCR_PIN_PX2 ((uint8_t)0x02) /*!< Pin 2 selected */ -#define AFIO_EVCR_PIN_PX3 ((uint8_t)0x03) /*!< Pin 3 selected */ -#define AFIO_EVCR_PIN_PX4 ((uint8_t)0x04) /*!< Pin 4 selected */ -#define AFIO_EVCR_PIN_PX5 ((uint8_t)0x05) /*!< Pin 5 selected */ -#define AFIO_EVCR_PIN_PX6 ((uint8_t)0x06) /*!< Pin 6 selected */ -#define AFIO_EVCR_PIN_PX7 ((uint8_t)0x07) /*!< Pin 7 selected */ -#define AFIO_EVCR_PIN_PX8 ((uint8_t)0x08) /*!< Pin 8 selected */ -#define AFIO_EVCR_PIN_PX9 ((uint8_t)0x09) /*!< Pin 9 selected */ -#define AFIO_EVCR_PIN_PX10 ((uint8_t)0x0A) /*!< Pin 10 selected */ -#define AFIO_EVCR_PIN_PX11 ((uint8_t)0x0B) /*!< Pin 11 selected */ -#define AFIO_EVCR_PIN_PX12 ((uint8_t)0x0C) /*!< Pin 12 selected */ -#define AFIO_EVCR_PIN_PX13 ((uint8_t)0x0D) /*!< Pin 13 selected */ -#define AFIO_EVCR_PIN_PX14 ((uint8_t)0x0E) /*!< Pin 14 selected */ -#define AFIO_EVCR_PIN_PX15 ((uint8_t)0x0F) /*!< Pin 15 selected */ - -#define AFIO_EVCR_PORT ((uint8_t)0x70) /*!< PORT[2:0] bits (Port selection) */ -#define AFIO_EVCR_PORT_0 ((uint8_t)0x10) /*!< Bit 0 */ -#define AFIO_EVCR_PORT_1 ((uint8_t)0x20) /*!< Bit 1 */ -#define AFIO_EVCR_PORT_2 ((uint8_t)0x40) /*!< Bit 2 */ - -/*!< PORT configuration */ -#define AFIO_EVCR_PORT_PA ((uint8_t)0x00) /*!< Port A selected */ -#define AFIO_EVCR_PORT_PB ((uint8_t)0x10) /*!< Port B selected */ -#define AFIO_EVCR_PORT_PC ((uint8_t)0x20) /*!< Port C selected */ -#define AFIO_EVCR_PORT_PD ((uint8_t)0x30) /*!< Port D selected */ -#define AFIO_EVCR_PORT_PE ((uint8_t)0x40) /*!< Port E selected */ - -#define AFIO_EVCR_EVOE ((uint8_t)0x80) /*!< Event Output Enable */ - -/****************** Bit definition for AFIO_MAPR register *******************/ -#define AFIO_MAPR_SPI1_REMAP ((uint32_t)0x00000001) /*!< SPI1 remapping */ -#define AFIO_MAPR_I2C1_REMAP ((uint32_t)0x00000002) /*!< I2C1 remapping */ -#define AFIO_MAPR_USART1_REMAP ((uint32_t)0x00000004) /*!< USART1 remapping */ -#define AFIO_MAPR_USART2_REMAP ((uint32_t)0x00000008) /*!< USART2 remapping */ - -#define AFIO_MAPR_USART3_REMAP ((uint32_t)0x00000030) /*!< USART3_REMAP[1:0] bits (USART3 remapping) */ -#define AFIO_MAPR_USART3_REMAP_0 ((uint32_t)0x00000010) /*!< Bit 0 */ -#define AFIO_MAPR_USART3_REMAP_1 ((uint32_t)0x00000020) /*!< Bit 1 */ - -/* USART3_REMAP configuration */ -#define AFIO_MAPR_USART3_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14) */ -#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP ((uint32_t)0x00000010) /*!< Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14) */ -#define AFIO_MAPR_USART3_REMAP_FULLREMAP ((uint32_t)0x00000030) /*!< Full remap (TX/PD8, RX/PD9, CK/PD10, CTS/PD11, RTS/PD12) */ - -#define AFIO_MAPR_TIM1_REMAP ((uint32_t)0x000000C0) /*!< TIM1_REMAP[1:0] bits (TIM1 remapping) */ -#define AFIO_MAPR_TIM1_REMAP_0 ((uint32_t)0x00000040) /*!< Bit 0 */ -#define AFIO_MAPR_TIM1_REMAP_1 ((uint32_t)0x00000080) /*!< Bit 1 */ - -/*!< TIM1_REMAP configuration */ -#define AFIO_MAPR_TIM1_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) */ -#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP ((uint32_t)0x00000040) /*!< Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) */ -#define AFIO_MAPR_TIM1_REMAP_FULLREMAP ((uint32_t)0x000000C0) /*!< Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) */ - -#define AFIO_MAPR_TIM2_REMAP ((uint32_t)0x00000300) /*!< TIM2_REMAP[1:0] bits (TIM2 remapping) */ -#define AFIO_MAPR_TIM2_REMAP_0 ((uint32_t)0x00000100) /*!< Bit 0 */ -#define AFIO_MAPR_TIM2_REMAP_1 ((uint32_t)0x00000200) /*!< Bit 1 */ - -/*!< TIM2_REMAP configuration */ -#define AFIO_MAPR_TIM2_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) */ -#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1 ((uint32_t)0x00000100) /*!< Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) */ -#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2 ((uint32_t)0x00000200) /*!< Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) */ -#define AFIO_MAPR_TIM2_REMAP_FULLREMAP ((uint32_t)0x00000300) /*!< Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) */ - -#define AFIO_MAPR_TIM3_REMAP ((uint32_t)0x00000C00) /*!< TIM3_REMAP[1:0] bits (TIM3 remapping) */ -#define AFIO_MAPR_TIM3_REMAP_0 ((uint32_t)0x00000400) /*!< Bit 0 */ -#define AFIO_MAPR_TIM3_REMAP_1 ((uint32_t)0x00000800) /*!< Bit 1 */ - -/*!< TIM3_REMAP configuration */ -#define AFIO_MAPR_TIM3_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) */ -#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP ((uint32_t)0x00000800) /*!< Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) */ -#define AFIO_MAPR_TIM3_REMAP_FULLREMAP ((uint32_t)0x00000C00) /*!< Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) */ - -#define AFIO_MAPR_TIM4_REMAP ((uint32_t)0x00001000) /*!< TIM4_REMAP bit (TIM4 remapping) */ - -#define AFIO_MAPR_CAN_REMAP ((uint32_t)0x00006000) /*!< CAN_REMAP[1:0] bits (CAN Alternate function remapping) */ -#define AFIO_MAPR_CAN_REMAP_0 ((uint32_t)0x00002000) /*!< Bit 0 */ -#define AFIO_MAPR_CAN_REMAP_1 ((uint32_t)0x00004000) /*!< Bit 1 */ - -/*!< CAN_REMAP configuration */ -#define AFIO_MAPR_CAN_REMAP_REMAP1 ((uint32_t)0x00000000) /*!< CANRX mapped to PA11, CANTX mapped to PA12 */ -#define AFIO_MAPR_CAN_REMAP_REMAP2 ((uint32_t)0x00004000) /*!< CANRX mapped to PB8, CANTX mapped to PB9 */ -#define AFIO_MAPR_CAN_REMAP_REMAP3 ((uint32_t)0x00006000) /*!< CANRX mapped to PD0, CANTX mapped to PD1 */ - -#define AFIO_MAPR_PD01_REMAP ((uint32_t)0x00008000) /*!< Port D0/Port D1 mapping on OSC_IN/OSC_OUT */ -#define AFIO_MAPR_TIM5CH4_IREMAP ((uint32_t)0x00010000) /*!< TIM5 Channel4 Internal Remap */ -#define AFIO_MAPR_ADC1_ETRGINJ_REMAP ((uint32_t)0x00020000) /*!< ADC 1 External Trigger Injected Conversion remapping */ -#define AFIO_MAPR_ADC1_ETRGREG_REMAP ((uint32_t)0x00040000) /*!< ADC 1 External Trigger Regular Conversion remapping */ -#define AFIO_MAPR_ADC2_ETRGINJ_REMAP ((uint32_t)0x00080000) /*!< ADC 2 External Trigger Injected Conversion remapping */ -#define AFIO_MAPR_ADC2_ETRGREG_REMAP ((uint32_t)0x00100000) /*!< ADC 2 External Trigger Regular Conversion remapping */ - -/*!< SWJ_CFG configuration */ -#define AFIO_MAPR_SWJ_CFG ((uint32_t)0x07000000) /*!< SWJ_CFG[2:0] bits (Serial Wire JTAG configuration) */ -#define AFIO_MAPR_SWJ_CFG_0 ((uint32_t)0x01000000) /*!< Bit 0 */ -#define AFIO_MAPR_SWJ_CFG_1 ((uint32_t)0x02000000) /*!< Bit 1 */ -#define AFIO_MAPR_SWJ_CFG_2 ((uint32_t)0x04000000) /*!< Bit 2 */ - -#define AFIO_MAPR_SWJ_CFG_RESET ((uint32_t)0x00000000) /*!< Full SWJ (JTAG-DP + SW-DP) : Reset State */ -#define AFIO_MAPR_SWJ_CFG_NOJNTRST ((uint32_t)0x01000000) /*!< Full SWJ (JTAG-DP + SW-DP) but without JNTRST */ -#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE ((uint32_t)0x02000000) /*!< JTAG-DP Disabled and SW-DP Enabled */ -#define AFIO_MAPR_SWJ_CFG_DISABLE ((uint32_t)0x04000000) /*!< JTAG-DP Disabled and SW-DP Disabled */ - -#ifdef STM32F10X_CL -/*!< ETH_REMAP configuration */ - #define AFIO_MAPR_ETH_REMAP ((uint32_t)0x00200000) /*!< SPI3_REMAP bit (Ethernet MAC I/O remapping) */ - -/*!< CAN2_REMAP configuration */ - #define AFIO_MAPR_CAN2_REMAP ((uint32_t)0x00400000) /*!< CAN2_REMAP bit (CAN2 I/O remapping) */ - -/*!< MII_RMII_SEL configuration */ - #define AFIO_MAPR_MII_RMII_SEL ((uint32_t)0x00800000) /*!< MII_RMII_SEL bit (Ethernet MII or RMII selection) */ - -/*!< SPI3_REMAP configuration */ - #define AFIO_MAPR_SPI3_REMAP ((uint32_t)0x10000000) /*!< SPI3_REMAP bit (SPI3 remapping) */ - -/*!< TIM2ITR1_IREMAP configuration */ - #define AFIO_MAPR_TIM2ITR1_IREMAP ((uint32_t)0x20000000) /*!< TIM2ITR1_IREMAP bit (TIM2 internal trigger 1 remapping) */ - -/*!< PTP_PPS_REMAP configuration */ - #define AFIO_MAPR_PTP_PPS_REMAP ((uint32_t)0x20000000) /*!< PTP_PPS_REMAP bit (Ethernet PTP PPS remapping) */ -#endif - -/***************** Bit definition for AFIO_EXTICR1 register *****************/ -#define AFIO_EXTICR1_EXTI0 ((uint16_t)0x000F) /*!< EXTI 0 configuration */ -#define AFIO_EXTICR1_EXTI1 ((uint16_t)0x00F0) /*!< EXTI 1 configuration */ -#define AFIO_EXTICR1_EXTI2 ((uint16_t)0x0F00) /*!< EXTI 2 configuration */ -#define AFIO_EXTICR1_EXTI3 ((uint16_t)0xF000) /*!< EXTI 3 configuration */ - -/*!< EXTI0 configuration */ -#define AFIO_EXTICR1_EXTI0_PA ((uint16_t)0x0000) /*!< PA[0] pin */ -#define AFIO_EXTICR1_EXTI0_PB ((uint16_t)0x0001) /*!< PB[0] pin */ -#define AFIO_EXTICR1_EXTI0_PC ((uint16_t)0x0002) /*!< PC[0] pin */ -#define AFIO_EXTICR1_EXTI0_PD ((uint16_t)0x0003) /*!< PD[0] pin */ -#define AFIO_EXTICR1_EXTI0_PE ((uint16_t)0x0004) /*!< PE[0] pin */ -#define AFIO_EXTICR1_EXTI0_PF ((uint16_t)0x0005) /*!< PF[0] pin */ -#define AFIO_EXTICR1_EXTI0_PG ((uint16_t)0x0006) /*!< PG[0] pin */ - -/*!< EXTI1 configuration */ -#define AFIO_EXTICR1_EXTI1_PA ((uint16_t)0x0000) /*!< PA[1] pin */ -#define AFIO_EXTICR1_EXTI1_PB ((uint16_t)0x0010) /*!< PB[1] pin */ -#define AFIO_EXTICR1_EXTI1_PC ((uint16_t)0x0020) /*!< PC[1] pin */ -#define AFIO_EXTICR1_EXTI1_PD ((uint16_t)0x0030) /*!< PD[1] pin */ -#define AFIO_EXTICR1_EXTI1_PE ((uint16_t)0x0040) /*!< PE[1] pin */ -#define AFIO_EXTICR1_EXTI1_PF ((uint16_t)0x0050) /*!< PF[1] pin */ -#define AFIO_EXTICR1_EXTI1_PG ((uint16_t)0x0060) /*!< PG[1] pin */ - -/*!< EXTI2 configuration */ -#define AFIO_EXTICR1_EXTI2_PA ((uint16_t)0x0000) /*!< PA[2] pin */ -#define AFIO_EXTICR1_EXTI2_PB ((uint16_t)0x0100) /*!< PB[2] pin */ -#define AFIO_EXTICR1_EXTI2_PC ((uint16_t)0x0200) /*!< PC[2] pin */ -#define AFIO_EXTICR1_EXTI2_PD ((uint16_t)0x0300) /*!< PD[2] pin */ -#define AFIO_EXTICR1_EXTI2_PE ((uint16_t)0x0400) /*!< PE[2] pin */ -#define AFIO_EXTICR1_EXTI2_PF ((uint16_t)0x0500) /*!< PF[2] pin */ -#define AFIO_EXTICR1_EXTI2_PG ((uint16_t)0x0600) /*!< PG[2] pin */ - -/*!< EXTI3 configuration */ -#define AFIO_EXTICR1_EXTI3_PA ((uint16_t)0x0000) /*!< PA[3] pin */ -#define AFIO_EXTICR1_EXTI3_PB ((uint16_t)0x1000) /*!< PB[3] pin */ -#define AFIO_EXTICR1_EXTI3_PC ((uint16_t)0x2000) /*!< PC[3] pin */ -#define AFIO_EXTICR1_EXTI3_PD ((uint16_t)0x3000) /*!< PD[3] pin */ -#define AFIO_EXTICR1_EXTI3_PE ((uint16_t)0x4000) /*!< PE[3] pin */ -#define AFIO_EXTICR1_EXTI3_PF ((uint16_t)0x5000) /*!< PF[3] pin */ -#define AFIO_EXTICR1_EXTI3_PG ((uint16_t)0x6000) /*!< PG[3] pin */ - -/***************** Bit definition for AFIO_EXTICR2 register *****************/ -#define AFIO_EXTICR2_EXTI4 ((uint16_t)0x000F) /*!< EXTI 4 configuration */ -#define AFIO_EXTICR2_EXTI5 ((uint16_t)0x00F0) /*!< EXTI 5 configuration */ -#define AFIO_EXTICR2_EXTI6 ((uint16_t)0x0F00) /*!< EXTI 6 configuration */ -#define AFIO_EXTICR2_EXTI7 ((uint16_t)0xF000) /*!< EXTI 7 configuration */ - -/*!< EXTI4 configuration */ -#define AFIO_EXTICR2_EXTI4_PA ((uint16_t)0x0000) /*!< PA[4] pin */ -#define AFIO_EXTICR2_EXTI4_PB ((uint16_t)0x0001) /*!< PB[4] pin */ -#define AFIO_EXTICR2_EXTI4_PC ((uint16_t)0x0002) /*!< PC[4] pin */ -#define AFIO_EXTICR2_EXTI4_PD ((uint16_t)0x0003) /*!< PD[4] pin */ -#define AFIO_EXTICR2_EXTI4_PE ((uint16_t)0x0004) /*!< PE[4] pin */ -#define AFIO_EXTICR2_EXTI4_PF ((uint16_t)0x0005) /*!< PF[4] pin */ -#define AFIO_EXTICR2_EXTI4_PG ((uint16_t)0x0006) /*!< PG[4] pin */ - -/* EXTI5 configuration */ -#define AFIO_EXTICR2_EXTI5_PA ((uint16_t)0x0000) /*!< PA[5] pin */ -#define AFIO_EXTICR2_EXTI5_PB ((uint16_t)0x0010) /*!< PB[5] pin */ -#define AFIO_EXTICR2_EXTI5_PC ((uint16_t)0x0020) /*!< PC[5] pin */ -#define AFIO_EXTICR2_EXTI5_PD ((uint16_t)0x0030) /*!< PD[5] pin */ -#define AFIO_EXTICR2_EXTI5_PE ((uint16_t)0x0040) /*!< PE[5] pin */ -#define AFIO_EXTICR2_EXTI5_PF ((uint16_t)0x0050) /*!< PF[5] pin */ -#define AFIO_EXTICR2_EXTI5_PG ((uint16_t)0x0060) /*!< PG[5] pin */ - -/*!< EXTI6 configuration */ -#define AFIO_EXTICR2_EXTI6_PA ((uint16_t)0x0000) /*!< PA[6] pin */ -#define AFIO_EXTICR2_EXTI6_PB ((uint16_t)0x0100) /*!< PB[6] pin */ -#define AFIO_EXTICR2_EXTI6_PC ((uint16_t)0x0200) /*!< PC[6] pin */ -#define AFIO_EXTICR2_EXTI6_PD ((uint16_t)0x0300) /*!< PD[6] pin */ -#define AFIO_EXTICR2_EXTI6_PE ((uint16_t)0x0400) /*!< PE[6] pin */ -#define AFIO_EXTICR2_EXTI6_PF ((uint16_t)0x0500) /*!< PF[6] pin */ -#define AFIO_EXTICR2_EXTI6_PG ((uint16_t)0x0600) /*!< PG[6] pin */ - -/*!< EXTI7 configuration */ -#define AFIO_EXTICR2_EXTI7_PA ((uint16_t)0x0000) /*!< PA[7] pin */ -#define AFIO_EXTICR2_EXTI7_PB ((uint16_t)0x1000) /*!< PB[7] pin */ -#define AFIO_EXTICR2_EXTI7_PC ((uint16_t)0x2000) /*!< PC[7] pin */ -#define AFIO_EXTICR2_EXTI7_PD ((uint16_t)0x3000) /*!< PD[7] pin */ -#define AFIO_EXTICR2_EXTI7_PE ((uint16_t)0x4000) /*!< PE[7] pin */ -#define AFIO_EXTICR2_EXTI7_PF ((uint16_t)0x5000) /*!< PF[7] pin */ -#define AFIO_EXTICR2_EXTI7_PG ((uint16_t)0x6000) /*!< PG[7] pin */ - -/***************** Bit definition for AFIO_EXTICR3 register *****************/ -#define AFIO_EXTICR3_EXTI8 ((uint16_t)0x000F) /*!< EXTI 8 configuration */ -#define AFIO_EXTICR3_EXTI9 ((uint16_t)0x00F0) /*!< EXTI 9 configuration */ -#define AFIO_EXTICR3_EXTI10 ((uint16_t)0x0F00) /*!< EXTI 10 configuration */ -#define AFIO_EXTICR3_EXTI11 ((uint16_t)0xF000) /*!< EXTI 11 configuration */ - -/*!< EXTI8 configuration */ -#define AFIO_EXTICR3_EXTI8_PA ((uint16_t)0x0000) /*!< PA[8] pin */ -#define AFIO_EXTICR3_EXTI8_PB ((uint16_t)0x0001) /*!< PB[8] pin */ -#define AFIO_EXTICR3_EXTI8_PC ((uint16_t)0x0002) /*!< PC[8] pin */ -#define AFIO_EXTICR3_EXTI8_PD ((uint16_t)0x0003) /*!< PD[8] pin */ -#define AFIO_EXTICR3_EXTI8_PE ((uint16_t)0x0004) /*!< PE[8] pin */ -#define AFIO_EXTICR3_EXTI8_PF ((uint16_t)0x0005) /*!< PF[8] pin */ -#define AFIO_EXTICR3_EXTI8_PG ((uint16_t)0x0006) /*!< PG[8] pin */ - -/*!< EXTI9 configuration */ -#define AFIO_EXTICR3_EXTI9_PA ((uint16_t)0x0000) /*!< PA[9] pin */ -#define AFIO_EXTICR3_EXTI9_PB ((uint16_t)0x0010) /*!< PB[9] pin */ -#define AFIO_EXTICR3_EXTI9_PC ((uint16_t)0x0020) /*!< PC[9] pin */ -#define AFIO_EXTICR3_EXTI9_PD ((uint16_t)0x0030) /*!< PD[9] pin */ -#define AFIO_EXTICR3_EXTI9_PE ((uint16_t)0x0040) /*!< PE[9] pin */ -#define AFIO_EXTICR3_EXTI9_PF ((uint16_t)0x0050) /*!< PF[9] pin */ -#define AFIO_EXTICR3_EXTI9_PG ((uint16_t)0x0060) /*!< PG[9] pin */ - -/*!< EXTI10 configuration */ -#define AFIO_EXTICR3_EXTI10_PA ((uint16_t)0x0000) /*!< PA[10] pin */ -#define AFIO_EXTICR3_EXTI10_PB ((uint16_t)0x0100) /*!< PB[10] pin */ -#define AFIO_EXTICR3_EXTI10_PC ((uint16_t)0x0200) /*!< PC[10] pin */ -#define AFIO_EXTICR3_EXTI10_PD ((uint16_t)0x0300) /*!< PD[10] pin */ -#define AFIO_EXTICR3_EXTI10_PE ((uint16_t)0x0400) /*!< PE[10] pin */ -#define AFIO_EXTICR3_EXTI10_PF ((uint16_t)0x0500) /*!< PF[10] pin */ -#define AFIO_EXTICR3_EXTI10_PG ((uint16_t)0x0600) /*!< PG[10] pin */ - -/*!< EXTI11 configuration */ -#define AFIO_EXTICR3_EXTI11_PA ((uint16_t)0x0000) /*!< PA[11] pin */ -#define AFIO_EXTICR3_EXTI11_PB ((uint16_t)0x1000) /*!< PB[11] pin */ -#define AFIO_EXTICR3_EXTI11_PC ((uint16_t)0x2000) /*!< PC[11] pin */ -#define AFIO_EXTICR3_EXTI11_PD ((uint16_t)0x3000) /*!< PD[11] pin */ -#define AFIO_EXTICR3_EXTI11_PE ((uint16_t)0x4000) /*!< PE[11] pin */ -#define AFIO_EXTICR3_EXTI11_PF ((uint16_t)0x5000) /*!< PF[11] pin */ -#define AFIO_EXTICR3_EXTI11_PG ((uint16_t)0x6000) /*!< PG[11] pin */ - -/***************** Bit definition for AFIO_EXTICR4 register *****************/ -#define AFIO_EXTICR4_EXTI12 ((uint16_t)0x000F) /*!< EXTI 12 configuration */ -#define AFIO_EXTICR4_EXTI13 ((uint16_t)0x00F0) /*!< EXTI 13 configuration */ -#define AFIO_EXTICR4_EXTI14 ((uint16_t)0x0F00) /*!< EXTI 14 configuration */ -#define AFIO_EXTICR4_EXTI15 ((uint16_t)0xF000) /*!< EXTI 15 configuration */ - -/* EXTI12 configuration */ -#define AFIO_EXTICR4_EXTI12_PA ((uint16_t)0x0000) /*!< PA[12] pin */ -#define AFIO_EXTICR4_EXTI12_PB ((uint16_t)0x0001) /*!< PB[12] pin */ -#define AFIO_EXTICR4_EXTI12_PC ((uint16_t)0x0002) /*!< PC[12] pin */ -#define AFIO_EXTICR4_EXTI12_PD ((uint16_t)0x0003) /*!< PD[12] pin */ -#define AFIO_EXTICR4_EXTI12_PE ((uint16_t)0x0004) /*!< PE[12] pin */ -#define AFIO_EXTICR4_EXTI12_PF ((uint16_t)0x0005) /*!< PF[12] pin */ -#define AFIO_EXTICR4_EXTI12_PG ((uint16_t)0x0006) /*!< PG[12] pin */ - -/* EXTI13 configuration */ -#define AFIO_EXTICR4_EXTI13_PA ((uint16_t)0x0000) /*!< PA[13] pin */ -#define AFIO_EXTICR4_EXTI13_PB ((uint16_t)0x0010) /*!< PB[13] pin */ -#define AFIO_EXTICR4_EXTI13_PC ((uint16_t)0x0020) /*!< PC[13] pin */ -#define AFIO_EXTICR4_EXTI13_PD ((uint16_t)0x0030) /*!< PD[13] pin */ -#define AFIO_EXTICR4_EXTI13_PE ((uint16_t)0x0040) /*!< PE[13] pin */ -#define AFIO_EXTICR4_EXTI13_PF ((uint16_t)0x0050) /*!< PF[13] pin */ -#define AFIO_EXTICR4_EXTI13_PG ((uint16_t)0x0060) /*!< PG[13] pin */ - -/*!< EXTI14 configuration */ -#define AFIO_EXTICR4_EXTI14_PA ((uint16_t)0x0000) /*!< PA[14] pin */ -#define AFIO_EXTICR4_EXTI14_PB ((uint16_t)0x0100) /*!< PB[14] pin */ -#define AFIO_EXTICR4_EXTI14_PC ((uint16_t)0x0200) /*!< PC[14] pin */ -#define AFIO_EXTICR4_EXTI14_PD ((uint16_t)0x0300) /*!< PD[14] pin */ -#define AFIO_EXTICR4_EXTI14_PE ((uint16_t)0x0400) /*!< PE[14] pin */ -#define AFIO_EXTICR4_EXTI14_PF ((uint16_t)0x0500) /*!< PF[14] pin */ -#define AFIO_EXTICR4_EXTI14_PG ((uint16_t)0x0600) /*!< PG[14] pin */ - -/*!< EXTI15 configuration */ -#define AFIO_EXTICR4_EXTI15_PA ((uint16_t)0x0000) /*!< PA[15] pin */ -#define AFIO_EXTICR4_EXTI15_PB ((uint16_t)0x1000) /*!< PB[15] pin */ -#define AFIO_EXTICR4_EXTI15_PC ((uint16_t)0x2000) /*!< PC[15] pin */ -#define AFIO_EXTICR4_EXTI15_PD ((uint16_t)0x3000) /*!< PD[15] pin */ -#define AFIO_EXTICR4_EXTI15_PE ((uint16_t)0x4000) /*!< PE[15] pin */ -#define AFIO_EXTICR4_EXTI15_PF ((uint16_t)0x5000) /*!< PF[15] pin */ -#define AFIO_EXTICR4_EXTI15_PG ((uint16_t)0x6000) /*!< PG[15] pin */ - -/******************************************************************************/ -/* */ -/* SystemTick */ -/* */ -/******************************************************************************/ - -/***************** Bit definition for SysTick_CTRL register *****************/ -#define SysTick_CTRL_ENABLE ((uint32_t)0x00000001) /*!< Counter enable */ -#define SysTick_CTRL_TICKINT ((uint32_t)0x00000002) /*!< Counting down to 0 pends the SysTick handler */ -#define SysTick_CTRL_CLKSOURCE ((uint32_t)0x00000004) /*!< Clock source */ -#define SysTick_CTRL_COUNTFLAG ((uint32_t)0x00010000) /*!< Count Flag */ - -/***************** Bit definition for SysTick_LOAD register *****************/ -#define SysTick_LOAD_RELOAD ((uint32_t)0x00FFFFFF) /*!< Value to load into the SysTick Current Value Register when the counter reaches 0 */ - -/***************** Bit definition for SysTick_VAL register ******************/ -#define SysTick_VAL_CURRENT ((uint32_t)0x00FFFFFF) /*!< Current value at the time the register is accessed */ - -/***************** Bit definition for SysTick_CALIB register ****************/ -#define SysTick_CALIB_TENMS ((uint32_t)0x00FFFFFF) /*!< Reload value to use for 10ms timing */ -#define SysTick_CALIB_SKEW ((uint32_t)0x40000000) /*!< Calibration value is not exactly 10 ms */ -#define SysTick_CALIB_NOREF ((uint32_t)0x80000000) /*!< The reference clock is not provided */ - -/******************************************************************************/ -/* */ -/* Nested Vectored Interrupt Controller */ -/* */ -/******************************************************************************/ - -/****************** Bit definition for NVIC_ISER register *******************/ -#define NVIC_ISER_SETENA ((uint32_t)0xFFFFFFFF) /*!< Interrupt set enable bits */ -#define NVIC_ISER_SETENA_0 ((uint32_t)0x00000001) /*!< bit 0 */ -#define NVIC_ISER_SETENA_1 ((uint32_t)0x00000002) /*!< bit 1 */ -#define NVIC_ISER_SETENA_2 ((uint32_t)0x00000004) /*!< bit 2 */ -#define NVIC_ISER_SETENA_3 ((uint32_t)0x00000008) /*!< bit 3 */ -#define NVIC_ISER_SETENA_4 ((uint32_t)0x00000010) /*!< bit 4 */ -#define NVIC_ISER_SETENA_5 ((uint32_t)0x00000020) /*!< bit 5 */ -#define NVIC_ISER_SETENA_6 ((uint32_t)0x00000040) /*!< bit 6 */ -#define NVIC_ISER_SETENA_7 ((uint32_t)0x00000080) /*!< bit 7 */ -#define NVIC_ISER_SETENA_8 ((uint32_t)0x00000100) /*!< bit 8 */ -#define NVIC_ISER_SETENA_9 ((uint32_t)0x00000200) /*!< bit 9 */ -#define NVIC_ISER_SETENA_10 ((uint32_t)0x00000400) /*!< bit 10 */ -#define NVIC_ISER_SETENA_11 ((uint32_t)0x00000800) /*!< bit 11 */ -#define NVIC_ISER_SETENA_12 ((uint32_t)0x00001000) /*!< bit 12 */ -#define NVIC_ISER_SETENA_13 ((uint32_t)0x00002000) /*!< bit 13 */ -#define NVIC_ISER_SETENA_14 ((uint32_t)0x00004000) /*!< bit 14 */ -#define NVIC_ISER_SETENA_15 ((uint32_t)0x00008000) /*!< bit 15 */ -#define NVIC_ISER_SETENA_16 ((uint32_t)0x00010000) /*!< bit 16 */ -#define NVIC_ISER_SETENA_17 ((uint32_t)0x00020000) /*!< bit 17 */ -#define NVIC_ISER_SETENA_18 ((uint32_t)0x00040000) /*!< bit 18 */ -#define NVIC_ISER_SETENA_19 ((uint32_t)0x00080000) /*!< bit 19 */ -#define NVIC_ISER_SETENA_20 ((uint32_t)0x00100000) /*!< bit 20 */ -#define NVIC_ISER_SETENA_21 ((uint32_t)0x00200000) /*!< bit 21 */ -#define NVIC_ISER_SETENA_22 ((uint32_t)0x00400000) /*!< bit 22 */ -#define NVIC_ISER_SETENA_23 ((uint32_t)0x00800000) /*!< bit 23 */ -#define NVIC_ISER_SETENA_24 ((uint32_t)0x01000000) /*!< bit 24 */ -#define NVIC_ISER_SETENA_25 ((uint32_t)0x02000000) /*!< bit 25 */ -#define NVIC_ISER_SETENA_26 ((uint32_t)0x04000000) /*!< bit 26 */ -#define NVIC_ISER_SETENA_27 ((uint32_t)0x08000000) /*!< bit 27 */ -#define NVIC_ISER_SETENA_28 ((uint32_t)0x10000000) /*!< bit 28 */ -#define NVIC_ISER_SETENA_29 ((uint32_t)0x20000000) /*!< bit 29 */ -#define NVIC_ISER_SETENA_30 ((uint32_t)0x40000000) /*!< bit 30 */ -#define NVIC_ISER_SETENA_31 ((uint32_t)0x80000000) /*!< bit 31 */ - -/****************** Bit definition for NVIC_ICER register *******************/ -#define NVIC_ICER_CLRENA ((uint32_t)0xFFFFFFFF) /*!< Interrupt clear-enable bits */ -#define NVIC_ICER_CLRENA_0 ((uint32_t)0x00000001) /*!< bit 0 */ -#define NVIC_ICER_CLRENA_1 ((uint32_t)0x00000002) /*!< bit 1 */ -#define NVIC_ICER_CLRENA_2 ((uint32_t)0x00000004) /*!< bit 2 */ -#define NVIC_ICER_CLRENA_3 ((uint32_t)0x00000008) /*!< bit 3 */ -#define NVIC_ICER_CLRENA_4 ((uint32_t)0x00000010) /*!< bit 4 */ -#define NVIC_ICER_CLRENA_5 ((uint32_t)0x00000020) /*!< bit 5 */ -#define NVIC_ICER_CLRENA_6 ((uint32_t)0x00000040) /*!< bit 6 */ -#define NVIC_ICER_CLRENA_7 ((uint32_t)0x00000080) /*!< bit 7 */ -#define NVIC_ICER_CLRENA_8 ((uint32_t)0x00000100) /*!< bit 8 */ -#define NVIC_ICER_CLRENA_9 ((uint32_t)0x00000200) /*!< bit 9 */ -#define NVIC_ICER_CLRENA_10 ((uint32_t)0x00000400) /*!< bit 10 */ -#define NVIC_ICER_CLRENA_11 ((uint32_t)0x00000800) /*!< bit 11 */ -#define NVIC_ICER_CLRENA_12 ((uint32_t)0x00001000) /*!< bit 12 */ -#define NVIC_ICER_CLRENA_13 ((uint32_t)0x00002000) /*!< bit 13 */ -#define NVIC_ICER_CLRENA_14 ((uint32_t)0x00004000) /*!< bit 14 */ -#define NVIC_ICER_CLRENA_15 ((uint32_t)0x00008000) /*!< bit 15 */ -#define NVIC_ICER_CLRENA_16 ((uint32_t)0x00010000) /*!< bit 16 */ -#define NVIC_ICER_CLRENA_17 ((uint32_t)0x00020000) /*!< bit 17 */ -#define NVIC_ICER_CLRENA_18 ((uint32_t)0x00040000) /*!< bit 18 */ -#define NVIC_ICER_CLRENA_19 ((uint32_t)0x00080000) /*!< bit 19 */ -#define NVIC_ICER_CLRENA_20 ((uint32_t)0x00100000) /*!< bit 20 */ -#define NVIC_ICER_CLRENA_21 ((uint32_t)0x00200000) /*!< bit 21 */ -#define NVIC_ICER_CLRENA_22 ((uint32_t)0x00400000) /*!< bit 22 */ -#define NVIC_ICER_CLRENA_23 ((uint32_t)0x00800000) /*!< bit 23 */ -#define NVIC_ICER_CLRENA_24 ((uint32_t)0x01000000) /*!< bit 24 */ -#define NVIC_ICER_CLRENA_25 ((uint32_t)0x02000000) /*!< bit 25 */ -#define NVIC_ICER_CLRENA_26 ((uint32_t)0x04000000) /*!< bit 26 */ -#define NVIC_ICER_CLRENA_27 ((uint32_t)0x08000000) /*!< bit 27 */ -#define NVIC_ICER_CLRENA_28 ((uint32_t)0x10000000) /*!< bit 28 */ -#define NVIC_ICER_CLRENA_29 ((uint32_t)0x20000000) /*!< bit 29 */ -#define NVIC_ICER_CLRENA_30 ((uint32_t)0x40000000) /*!< bit 30 */ -#define NVIC_ICER_CLRENA_31 ((uint32_t)0x80000000) /*!< bit 31 */ - -/****************** Bit definition for NVIC_ISPR register *******************/ -#define NVIC_ISPR_SETPEND ((uint32_t)0xFFFFFFFF) /*!< Interrupt set-pending bits */ -#define NVIC_ISPR_SETPEND_0 ((uint32_t)0x00000001) /*!< bit 0 */ -#define NVIC_ISPR_SETPEND_1 ((uint32_t)0x00000002) /*!< bit 1 */ -#define NVIC_ISPR_SETPEND_2 ((uint32_t)0x00000004) /*!< bit 2 */ -#define NVIC_ISPR_SETPEND_3 ((uint32_t)0x00000008) /*!< bit 3 */ -#define NVIC_ISPR_SETPEND_4 ((uint32_t)0x00000010) /*!< bit 4 */ -#define NVIC_ISPR_SETPEND_5 ((uint32_t)0x00000020) /*!< bit 5 */ -#define NVIC_ISPR_SETPEND_6 ((uint32_t)0x00000040) /*!< bit 6 */ -#define NVIC_ISPR_SETPEND_7 ((uint32_t)0x00000080) /*!< bit 7 */ -#define NVIC_ISPR_SETPEND_8 ((uint32_t)0x00000100) /*!< bit 8 */ -#define NVIC_ISPR_SETPEND_9 ((uint32_t)0x00000200) /*!< bit 9 */ -#define NVIC_ISPR_SETPEND_10 ((uint32_t)0x00000400) /*!< bit 10 */ -#define NVIC_ISPR_SETPEND_11 ((uint32_t)0x00000800) /*!< bit 11 */ -#define NVIC_ISPR_SETPEND_12 ((uint32_t)0x00001000) /*!< bit 12 */ -#define NVIC_ISPR_SETPEND_13 ((uint32_t)0x00002000) /*!< bit 13 */ -#define NVIC_ISPR_SETPEND_14 ((uint32_t)0x00004000) /*!< bit 14 */ -#define NVIC_ISPR_SETPEND_15 ((uint32_t)0x00008000) /*!< bit 15 */ -#define NVIC_ISPR_SETPEND_16 ((uint32_t)0x00010000) /*!< bit 16 */ -#define NVIC_ISPR_SETPEND_17 ((uint32_t)0x00020000) /*!< bit 17 */ -#define NVIC_ISPR_SETPEND_18 ((uint32_t)0x00040000) /*!< bit 18 */ -#define NVIC_ISPR_SETPEND_19 ((uint32_t)0x00080000) /*!< bit 19 */ -#define NVIC_ISPR_SETPEND_20 ((uint32_t)0x00100000) /*!< bit 20 */ -#define NVIC_ISPR_SETPEND_21 ((uint32_t)0x00200000) /*!< bit 21 */ -#define NVIC_ISPR_SETPEND_22 ((uint32_t)0x00400000) /*!< bit 22 */ -#define NVIC_ISPR_SETPEND_23 ((uint32_t)0x00800000) /*!< bit 23 */ -#define NVIC_ISPR_SETPEND_24 ((uint32_t)0x01000000) /*!< bit 24 */ -#define NVIC_ISPR_SETPEND_25 ((uint32_t)0x02000000) /*!< bit 25 */ -#define NVIC_ISPR_SETPEND_26 ((uint32_t)0x04000000) /*!< bit 26 */ -#define NVIC_ISPR_SETPEND_27 ((uint32_t)0x08000000) /*!< bit 27 */ -#define NVIC_ISPR_SETPEND_28 ((uint32_t)0x10000000) /*!< bit 28 */ -#define NVIC_ISPR_SETPEND_29 ((uint32_t)0x20000000) /*!< bit 29 */ -#define NVIC_ISPR_SETPEND_30 ((uint32_t)0x40000000) /*!< bit 30 */ -#define NVIC_ISPR_SETPEND_31 ((uint32_t)0x80000000) /*!< bit 31 */ - -/****************** Bit definition for NVIC_ICPR register *******************/ -#define NVIC_ICPR_CLRPEND ((uint32_t)0xFFFFFFFF) /*!< Interrupt clear-pending bits */ -#define NVIC_ICPR_CLRPEND_0 ((uint32_t)0x00000001) /*!< bit 0 */ -#define NVIC_ICPR_CLRPEND_1 ((uint32_t)0x00000002) /*!< bit 1 */ -#define NVIC_ICPR_CLRPEND_2 ((uint32_t)0x00000004) /*!< bit 2 */ -#define NVIC_ICPR_CLRPEND_3 ((uint32_t)0x00000008) /*!< bit 3 */ -#define NVIC_ICPR_CLRPEND_4 ((uint32_t)0x00000010) /*!< bit 4 */ -#define NVIC_ICPR_CLRPEND_5 ((uint32_t)0x00000020) /*!< bit 5 */ -#define NVIC_ICPR_CLRPEND_6 ((uint32_t)0x00000040) /*!< bit 6 */ -#define NVIC_ICPR_CLRPEND_7 ((uint32_t)0x00000080) /*!< bit 7 */ -#define NVIC_ICPR_CLRPEND_8 ((uint32_t)0x00000100) /*!< bit 8 */ -#define NVIC_ICPR_CLRPEND_9 ((uint32_t)0x00000200) /*!< bit 9 */ -#define NVIC_ICPR_CLRPEND_10 ((uint32_t)0x00000400) /*!< bit 10 */ -#define NVIC_ICPR_CLRPEND_11 ((uint32_t)0x00000800) /*!< bit 11 */ -#define NVIC_ICPR_CLRPEND_12 ((uint32_t)0x00001000) /*!< bit 12 */ -#define NVIC_ICPR_CLRPEND_13 ((uint32_t)0x00002000) /*!< bit 13 */ -#define NVIC_ICPR_CLRPEND_14 ((uint32_t)0x00004000) /*!< bit 14 */ -#define NVIC_ICPR_CLRPEND_15 ((uint32_t)0x00008000) /*!< bit 15 */ -#define NVIC_ICPR_CLRPEND_16 ((uint32_t)0x00010000) /*!< bit 16 */ -#define NVIC_ICPR_CLRPEND_17 ((uint32_t)0x00020000) /*!< bit 17 */ -#define NVIC_ICPR_CLRPEND_18 ((uint32_t)0x00040000) /*!< bit 18 */ -#define NVIC_ICPR_CLRPEND_19 ((uint32_t)0x00080000) /*!< bit 19 */ -#define NVIC_ICPR_CLRPEND_20 ((uint32_t)0x00100000) /*!< bit 20 */ -#define NVIC_ICPR_CLRPEND_21 ((uint32_t)0x00200000) /*!< bit 21 */ -#define NVIC_ICPR_CLRPEND_22 ((uint32_t)0x00400000) /*!< bit 22 */ -#define NVIC_ICPR_CLRPEND_23 ((uint32_t)0x00800000) /*!< bit 23 */ -#define NVIC_ICPR_CLRPEND_24 ((uint32_t)0x01000000) /*!< bit 24 */ -#define NVIC_ICPR_CLRPEND_25 ((uint32_t)0x02000000) /*!< bit 25 */ -#define NVIC_ICPR_CLRPEND_26 ((uint32_t)0x04000000) /*!< bit 26 */ -#define NVIC_ICPR_CLRPEND_27 ((uint32_t)0x08000000) /*!< bit 27 */ -#define NVIC_ICPR_CLRPEND_28 ((uint32_t)0x10000000) /*!< bit 28 */ -#define NVIC_ICPR_CLRPEND_29 ((uint32_t)0x20000000) /*!< bit 29 */ -#define NVIC_ICPR_CLRPEND_30 ((uint32_t)0x40000000) /*!< bit 30 */ -#define NVIC_ICPR_CLRPEND_31 ((uint32_t)0x80000000) /*!< bit 31 */ - -/****************** Bit definition for NVIC_IABR register *******************/ -#define NVIC_IABR_ACTIVE ((uint32_t)0xFFFFFFFF) /*!< Interrupt active flags */ -#define NVIC_IABR_ACTIVE_0 ((uint32_t)0x00000001) /*!< bit 0 */ -#define NVIC_IABR_ACTIVE_1 ((uint32_t)0x00000002) /*!< bit 1 */ -#define NVIC_IABR_ACTIVE_2 ((uint32_t)0x00000004) /*!< bit 2 */ -#define NVIC_IABR_ACTIVE_3 ((uint32_t)0x00000008) /*!< bit 3 */ -#define NVIC_IABR_ACTIVE_4 ((uint32_t)0x00000010) /*!< bit 4 */ -#define NVIC_IABR_ACTIVE_5 ((uint32_t)0x00000020) /*!< bit 5 */ -#define NVIC_IABR_ACTIVE_6 ((uint32_t)0x00000040) /*!< bit 6 */ -#define NVIC_IABR_ACTIVE_7 ((uint32_t)0x00000080) /*!< bit 7 */ -#define NVIC_IABR_ACTIVE_8 ((uint32_t)0x00000100) /*!< bit 8 */ -#define NVIC_IABR_ACTIVE_9 ((uint32_t)0x00000200) /*!< bit 9 */ -#define NVIC_IABR_ACTIVE_10 ((uint32_t)0x00000400) /*!< bit 10 */ -#define NVIC_IABR_ACTIVE_11 ((uint32_t)0x00000800) /*!< bit 11 */ -#define NVIC_IABR_ACTIVE_12 ((uint32_t)0x00001000) /*!< bit 12 */ -#define NVIC_IABR_ACTIVE_13 ((uint32_t)0x00002000) /*!< bit 13 */ -#define NVIC_IABR_ACTIVE_14 ((uint32_t)0x00004000) /*!< bit 14 */ -#define NVIC_IABR_ACTIVE_15 ((uint32_t)0x00008000) /*!< bit 15 */ -#define NVIC_IABR_ACTIVE_16 ((uint32_t)0x00010000) /*!< bit 16 */ -#define NVIC_IABR_ACTIVE_17 ((uint32_t)0x00020000) /*!< bit 17 */ -#define NVIC_IABR_ACTIVE_18 ((uint32_t)0x00040000) /*!< bit 18 */ -#define NVIC_IABR_ACTIVE_19 ((uint32_t)0x00080000) /*!< bit 19 */ -#define NVIC_IABR_ACTIVE_20 ((uint32_t)0x00100000) /*!< bit 20 */ -#define NVIC_IABR_ACTIVE_21 ((uint32_t)0x00200000) /*!< bit 21 */ -#define NVIC_IABR_ACTIVE_22 ((uint32_t)0x00400000) /*!< bit 22 */ -#define NVIC_IABR_ACTIVE_23 ((uint32_t)0x00800000) /*!< bit 23 */ -#define NVIC_IABR_ACTIVE_24 ((uint32_t)0x01000000) /*!< bit 24 */ -#define NVIC_IABR_ACTIVE_25 ((uint32_t)0x02000000) /*!< bit 25 */ -#define NVIC_IABR_ACTIVE_26 ((uint32_t)0x04000000) /*!< bit 26 */ -#define NVIC_IABR_ACTIVE_27 ((uint32_t)0x08000000) /*!< bit 27 */ -#define NVIC_IABR_ACTIVE_28 ((uint32_t)0x10000000) /*!< bit 28 */ -#define NVIC_IABR_ACTIVE_29 ((uint32_t)0x20000000) /*!< bit 29 */ -#define NVIC_IABR_ACTIVE_30 ((uint32_t)0x40000000) /*!< bit 30 */ -#define NVIC_IABR_ACTIVE_31 ((uint32_t)0x80000000) /*!< bit 31 */ - -/****************** Bit definition for NVIC_PRI0 register *******************/ -#define NVIC_IPR0_PRI_0 ((uint32_t)0x000000FF) /*!< Priority of interrupt 0 */ -#define NVIC_IPR0_PRI_1 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 1 */ -#define NVIC_IPR0_PRI_2 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 2 */ -#define NVIC_IPR0_PRI_3 ((uint32_t)0xFF000000) /*!< Priority of interrupt 3 */ - -/****************** Bit definition for NVIC_PRI1 register *******************/ -#define NVIC_IPR1_PRI_4 ((uint32_t)0x000000FF) /*!< Priority of interrupt 4 */ -#define NVIC_IPR1_PRI_5 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 5 */ -#define NVIC_IPR1_PRI_6 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 6 */ -#define NVIC_IPR1_PRI_7 ((uint32_t)0xFF000000) /*!< Priority of interrupt 7 */ - -/****************** Bit definition for NVIC_PRI2 register *******************/ -#define NVIC_IPR2_PRI_8 ((uint32_t)0x000000FF) /*!< Priority of interrupt 8 */ -#define NVIC_IPR2_PRI_9 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 9 */ -#define NVIC_IPR2_PRI_10 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 10 */ -#define NVIC_IPR2_PRI_11 ((uint32_t)0xFF000000) /*!< Priority of interrupt 11 */ - -/****************** Bit definition for NVIC_PRI3 register *******************/ -#define NVIC_IPR3_PRI_12 ((uint32_t)0x000000FF) /*!< Priority of interrupt 12 */ -#define NVIC_IPR3_PRI_13 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 13 */ -#define NVIC_IPR3_PRI_14 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 14 */ -#define NVIC_IPR3_PRI_15 ((uint32_t)0xFF000000) /*!< Priority of interrupt 15 */ - -/****************** Bit definition for NVIC_PRI4 register *******************/ -#define NVIC_IPR4_PRI_16 ((uint32_t)0x000000FF) /*!< Priority of interrupt 16 */ -#define NVIC_IPR4_PRI_17 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 17 */ -#define NVIC_IPR4_PRI_18 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 18 */ -#define NVIC_IPR4_PRI_19 ((uint32_t)0xFF000000) /*!< Priority of interrupt 19 */ - -/****************** Bit definition for NVIC_PRI5 register *******************/ -#define NVIC_IPR5_PRI_20 ((uint32_t)0x000000FF) /*!< Priority of interrupt 20 */ -#define NVIC_IPR5_PRI_21 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 21 */ -#define NVIC_IPR5_PRI_22 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 22 */ -#define NVIC_IPR5_PRI_23 ((uint32_t)0xFF000000) /*!< Priority of interrupt 23 */ - -/****************** Bit definition for NVIC_PRI6 register *******************/ -#define NVIC_IPR6_PRI_24 ((uint32_t)0x000000FF) /*!< Priority of interrupt 24 */ -#define NVIC_IPR6_PRI_25 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 25 */ -#define NVIC_IPR6_PRI_26 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 26 */ -#define NVIC_IPR6_PRI_27 ((uint32_t)0xFF000000) /*!< Priority of interrupt 27 */ - -/****************** Bit definition for NVIC_PRI7 register *******************/ -#define NVIC_IPR7_PRI_28 ((uint32_t)0x000000FF) /*!< Priority of interrupt 28 */ -#define NVIC_IPR7_PRI_29 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 29 */ -#define NVIC_IPR7_PRI_30 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 30 */ -#define NVIC_IPR7_PRI_31 ((uint32_t)0xFF000000) /*!< Priority of interrupt 31 */ - -/****************** Bit definition for SCB_CPUID register *******************/ -#define SCB_CPUID_REVISION ((uint32_t)0x0000000F) /*!< Implementation defined revision number */ -#define SCB_CPUID_PARTNO ((uint32_t)0x0000FFF0) /*!< Number of processor within family */ -#define SCB_CPUID_Constant ((uint32_t)0x000F0000) /*!< Reads as 0x0F */ -#define SCB_CPUID_VARIANT ((uint32_t)0x00F00000) /*!< Implementation defined variant number */ -#define SCB_CPUID_IMPLEMENTER ((uint32_t)0xFF000000) /*!< Implementer code. ARM is 0x41 */ - -/******************* Bit definition for SCB_ICSR register *******************/ -#define SCB_ICSR_VECTACTIVE ((uint32_t)0x000001FF) /*!< Active ISR number field */ -#define SCB_ICSR_RETTOBASE ((uint32_t)0x00000800) /*!< All active exceptions minus the IPSR_current_exception yields the empty set */ -#define SCB_ICSR_VECTPENDING ((uint32_t)0x003FF000) /*!< Pending ISR number field */ -#define SCB_ICSR_ISRPENDING ((uint32_t)0x00400000) /*!< Interrupt pending flag */ -#define SCB_ICSR_ISRPREEMPT ((uint32_t)0x00800000) /*!< It indicates that a pending interrupt becomes active in the next running cycle */ -#define SCB_ICSR_PENDSTCLR ((uint32_t)0x02000000) /*!< Clear pending SysTick bit */ -#define SCB_ICSR_PENDSTSET ((uint32_t)0x04000000) /*!< Set pending SysTick bit */ -#define SCB_ICSR_PENDSVCLR ((uint32_t)0x08000000) /*!< Clear pending pendSV bit */ -#define SCB_ICSR_PENDSVSET ((uint32_t)0x10000000) /*!< Set pending pendSV bit */ -#define SCB_ICSR_NMIPENDSET ((uint32_t)0x80000000) /*!< Set pending NMI bit */ - -/******************* Bit definition for SCB_VTOR register *******************/ -#define SCB_VTOR_TBLOFF ((uint32_t)0x1FFFFF80) /*!< Vector table base offset field */ -#define SCB_VTOR_TBLBASE ((uint32_t)0x20000000) /*!< Table base in code(0) or RAM(1) */ - -/*!<***************** Bit definition for SCB_AIRCR register *******************/ -#define SCB_AIRCR_VECTRESET ((uint32_t)0x00000001) /*!< System Reset bit */ -#define SCB_AIRCR_VECTCLRACTIVE ((uint32_t)0x00000002) /*!< Clear active vector bit */ -#define SCB_AIRCR_SYSRESETREQ ((uint32_t)0x00000004) /*!< Requests chip control logic to generate a reset */ - -#define SCB_AIRCR_PRIGROUP ((uint32_t)0x00000700) /*!< PRIGROUP[2:0] bits (Priority group) */ -#define SCB_AIRCR_PRIGROUP_0 ((uint32_t)0x00000100) /*!< Bit 0 */ -#define SCB_AIRCR_PRIGROUP_1 ((uint32_t)0x00000200) /*!< Bit 1 */ -#define SCB_AIRCR_PRIGROUP_2 ((uint32_t)0x00000400) /*!< Bit 2 */ - -/* prority group configuration */ -#define SCB_AIRCR_PRIGROUP0 ((uint32_t)0x00000000) /*!< Priority group=0 (7 bits of pre-emption priority, 1 bit of subpriority) */ -#define SCB_AIRCR_PRIGROUP1 ((uint32_t)0x00000100) /*!< Priority group=1 (6 bits of pre-emption priority, 2 bits of subpriority) */ -#define SCB_AIRCR_PRIGROUP2 ((uint32_t)0x00000200) /*!< Priority group=2 (5 bits of pre-emption priority, 3 bits of subpriority) */ -#define SCB_AIRCR_PRIGROUP3 ((uint32_t)0x00000300) /*!< Priority group=3 (4 bits of pre-emption priority, 4 bits of subpriority) */ -#define SCB_AIRCR_PRIGROUP4 ((uint32_t)0x00000400) /*!< Priority group=4 (3 bits of pre-emption priority, 5 bits of subpriority) */ -#define SCB_AIRCR_PRIGROUP5 ((uint32_t)0x00000500) /*!< Priority group=5 (2 bits of pre-emption priority, 6 bits of subpriority) */ -#define SCB_AIRCR_PRIGROUP6 ((uint32_t)0x00000600) /*!< Priority group=6 (1 bit of pre-emption priority, 7 bits of subpriority) */ -#define SCB_AIRCR_PRIGROUP7 ((uint32_t)0x00000700) /*!< Priority group=7 (no pre-emption priority, 8 bits of subpriority) */ - -#define SCB_AIRCR_ENDIANESS ((uint32_t)0x00008000) /*!< Data endianness bit */ -#define SCB_AIRCR_VECTKEY ((uint32_t)0xFFFF0000) /*!< Register key (VECTKEY) - Reads as 0xFA05 (VECTKEYSTAT) */ - -/******************* Bit definition for SCB_SCR register ********************/ -#define SCB_SCR_SLEEPONEXIT ((uint8_t)0x02) /*!< Sleep on exit bit */ -#define SCB_SCR_SLEEPDEEP ((uint8_t)0x04) /*!< Sleep deep bit */ -#define SCB_SCR_SEVONPEND ((uint8_t)0x10) /*!< Wake up from WFE */ - -/******************** Bit definition for SCB_CCR register *******************/ -#define SCB_CCR_NONBASETHRDENA ((uint16_t)0x0001) /*!< Thread mode can be entered from any level in Handler mode by controlled return value */ -#define SCB_CCR_USERSETMPEND ((uint16_t)0x0002) /*!< Enables user code to write the Software Trigger Interrupt register to trigger (pend) a Main exception */ -#define SCB_CCR_UNALIGN_TRP ((uint16_t)0x0008) /*!< Trap for unaligned access */ -#define SCB_CCR_DIV_0_TRP ((uint16_t)0x0010) /*!< Trap on Divide by 0 */ -#define SCB_CCR_BFHFNMIGN ((uint16_t)0x0100) /*!< Handlers running at priority -1 and -2 */ -#define SCB_CCR_STKALIGN ((uint16_t)0x0200) /*!< On exception entry, the SP used prior to the exception is adjusted to be 8-byte aligned */ - -/******************* Bit definition for SCB_SHPR register ********************/ -#define SCB_SHPR_PRI_N ((uint32_t)0x000000FF) /*!< Priority of system handler 4,8, and 12. Mem Manage, reserved and Debug Monitor */ -#define SCB_SHPR_PRI_N1 ((uint32_t)0x0000FF00) /*!< Priority of system handler 5,9, and 13. Bus Fault, reserved and reserved */ -#define SCB_SHPR_PRI_N2 ((uint32_t)0x00FF0000) /*!< Priority of system handler 6,10, and 14. Usage Fault, reserved and PendSV */ -#define SCB_SHPR_PRI_N3 ((uint32_t)0xFF000000) /*!< Priority of system handler 7,11, and 15. Reserved, SVCall and SysTick */ - -/****************** Bit definition for SCB_SHCSR register *******************/ -#define SCB_SHCSR_MEMFAULTACT ((uint32_t)0x00000001) /*!< MemManage is active */ -#define SCB_SHCSR_BUSFAULTACT ((uint32_t)0x00000002) /*!< BusFault is active */ -#define SCB_SHCSR_USGFAULTACT ((uint32_t)0x00000008) /*!< UsageFault is active */ -#define SCB_SHCSR_SVCALLACT ((uint32_t)0x00000080) /*!< SVCall is active */ -#define SCB_SHCSR_MONITORACT ((uint32_t)0x00000100) /*!< Monitor is active */ -#define SCB_SHCSR_PENDSVACT ((uint32_t)0x00000400) /*!< PendSV is active */ -#define SCB_SHCSR_SYSTICKACT ((uint32_t)0x00000800) /*!< SysTick is active */ -#define SCB_SHCSR_USGFAULTPENDED ((uint32_t)0x00001000) /*!< Usage Fault is pended */ -#define SCB_SHCSR_MEMFAULTPENDED ((uint32_t)0x00002000) /*!< MemManage is pended */ -#define SCB_SHCSR_BUSFAULTPENDED ((uint32_t)0x00004000) /*!< Bus Fault is pended */ -#define SCB_SHCSR_SVCALLPENDED ((uint32_t)0x00008000) /*!< SVCall is pended */ -#define SCB_SHCSR_MEMFAULTENA ((uint32_t)0x00010000) /*!< MemManage enable */ -#define SCB_SHCSR_BUSFAULTENA ((uint32_t)0x00020000) /*!< Bus Fault enable */ -#define SCB_SHCSR_USGFAULTENA ((uint32_t)0x00040000) /*!< UsageFault enable */ - -/******************* Bit definition for SCB_CFSR register *******************/ -/*!< MFSR */ -#define SCB_CFSR_IACCVIOL ((uint32_t)0x00000001) /*!< Instruction access violation */ -#define SCB_CFSR_DACCVIOL ((uint32_t)0x00000002) /*!< Data access violation */ -#define SCB_CFSR_MUNSTKERR ((uint32_t)0x00000008) /*!< Unstacking error */ -#define SCB_CFSR_MSTKERR ((uint32_t)0x00000010) /*!< Stacking error */ -#define SCB_CFSR_MMARVALID ((uint32_t)0x00000080) /*!< Memory Manage Address Register address valid flag */ -/*!< BFSR */ -#define SCB_CFSR_IBUSERR ((uint32_t)0x00000100) /*!< Instruction bus error flag */ -#define SCB_CFSR_PRECISERR ((uint32_t)0x00000200) /*!< Precise data bus error */ -#define SCB_CFSR_IMPRECISERR ((uint32_t)0x00000400) /*!< Imprecise data bus error */ -#define SCB_CFSR_UNSTKERR ((uint32_t)0x00000800) /*!< Unstacking error */ -#define SCB_CFSR_STKERR ((uint32_t)0x00001000) /*!< Stacking error */ -#define SCB_CFSR_BFARVALID ((uint32_t)0x00008000) /*!< Bus Fault Address Register address valid flag */ -/*!< UFSR */ -#define SCB_CFSR_UNDEFINSTR ((uint32_t)0x00010000) /*!< The processor attempt to excecute an undefined instruction */ -#define SCB_CFSR_INVSTATE ((uint32_t)0x00020000) /*!< Invalid combination of EPSR and instruction */ -#define SCB_CFSR_INVPC ((uint32_t)0x00040000) /*!< Attempt to load EXC_RETURN into pc illegally */ -#define SCB_CFSR_NOCP ((uint32_t)0x00080000) /*!< Attempt to use a coprocessor instruction */ -#define SCB_CFSR_UNALIGNED ((uint32_t)0x01000000) /*!< Fault occurs when there is an attempt to make an unaligned memory access */ -#define SCB_CFSR_DIVBYZERO ((uint32_t)0x02000000) /*!< Fault occurs when SDIV or DIV instruction is used with a divisor of 0 */ - -/******************* Bit definition for SCB_HFSR register *******************/ -#define SCB_HFSR_VECTTBL ((uint32_t)0x00000002) /*!< Fault occures because of vector table read on exception processing */ -#define SCB_HFSR_FORCED ((uint32_t)0x40000000) /*!< Hard Fault activated when a configurable Fault was received and cannot activate */ -#define SCB_HFSR_DEBUGEVT ((uint32_t)0x80000000) /*!< Fault related to debug */ - -/******************* Bit definition for SCB_DFSR register *******************/ -#define SCB_DFSR_HALTED ((uint8_t)0x01) /*!< Halt request flag */ -#define SCB_DFSR_BKPT ((uint8_t)0x02) /*!< BKPT flag */ -#define SCB_DFSR_DWTTRAP ((uint8_t)0x04) /*!< Data Watchpoint and Trace (DWT) flag */ -#define SCB_DFSR_VCATCH ((uint8_t)0x08) /*!< Vector catch flag */ -#define SCB_DFSR_EXTERNAL ((uint8_t)0x10) /*!< External debug request flag */ - -/******************* Bit definition for SCB_MMFAR register ******************/ -#define SCB_MMFAR_ADDRESS ((uint32_t)0xFFFFFFFF) /*!< Mem Manage fault address field */ - -/******************* Bit definition for SCB_BFAR register *******************/ -#define SCB_BFAR_ADDRESS ((uint32_t)0xFFFFFFFF) /*!< Bus fault address field */ - -/******************* Bit definition for SCB_afsr register *******************/ -#define SCB_AFSR_IMPDEF ((uint32_t)0xFFFFFFFF) /*!< Implementation defined */ - -/******************************************************************************/ -/* */ -/* External Interrupt/Event Controller */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for EXTI_IMR register *******************/ -#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */ -#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */ -#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */ -#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */ -#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */ -#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */ -#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */ -#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */ -#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */ -#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */ -#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */ -#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */ -#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */ -#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */ -#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */ -#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */ -#define EXTI_IMR_MR16 ((uint32_t)0x00010000) /*!< Interrupt Mask on line 16 */ -#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */ -#define EXTI_IMR_MR18 ((uint32_t)0x00040000) /*!< Interrupt Mask on line 18 */ -#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */ - -/******************* Bit definition for EXTI_EMR register *******************/ -#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */ -#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */ -#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */ -#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */ -#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */ -#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */ -#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */ -#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */ -#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */ -#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */ -#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */ -#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */ -#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */ -#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */ -#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */ -#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */ -#define EXTI_EMR_MR16 ((uint32_t)0x00010000) /*!< Event Mask on line 16 */ -#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */ -#define EXTI_EMR_MR18 ((uint32_t)0x00040000) /*!< Event Mask on line 18 */ -#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */ - -/****************** Bit definition for EXTI_RTSR register *******************/ -#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */ -#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */ -#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */ -#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */ -#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */ -#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */ -#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */ -#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */ -#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */ -#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */ -#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */ -#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */ -#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */ -#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */ -#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */ -#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */ -#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */ -#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */ -#define EXTI_RTSR_TR18 ((uint32_t)0x00040000) /*!< Rising trigger event configuration bit of line 18 */ -#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */ - -/****************** Bit definition for EXTI_FTSR register *******************/ -#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */ -#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */ -#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */ -#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */ -#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */ -#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */ -#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */ -#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */ -#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */ -#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */ -#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */ -#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */ -#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */ -#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */ -#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */ -#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */ -#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */ -#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */ -#define EXTI_FTSR_TR18 ((uint32_t)0x00040000) /*!< Falling trigger event configuration bit of line 18 */ -#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */ - -/****************** Bit definition for EXTI_SWIER register ******************/ -#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */ -#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */ -#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */ -#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */ -#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */ -#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */ -#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */ -#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */ -#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */ -#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */ -#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */ -#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */ -#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */ -#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */ -#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */ -#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */ -#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */ -#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */ -#define EXTI_SWIER_SWIER18 ((uint32_t)0x00040000) /*!< Software Interrupt on line 18 */ -#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */ - -/******************* Bit definition for EXTI_PR register ********************/ -#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit for line 0 */ -#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit for line 1 */ -#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit for line 2 */ -#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit for line 3 */ -#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit for line 4 */ -#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit for line 5 */ -#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit for line 6 */ -#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit for line 7 */ -#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit for line 8 */ -#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit for line 9 */ -#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit for line 10 */ -#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit for line 11 */ -#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit for line 12 */ -#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit for line 13 */ -#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit for line 14 */ -#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit for line 15 */ -#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit for line 16 */ -#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit for line 17 */ -#define EXTI_PR_PR18 ((uint32_t)0x00040000) /*!< Pending bit for line 18 */ -#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit for line 19 */ - -/******************************************************************************/ -/* */ -/* DMA Controller */ -/* */ -/******************************************************************************/ - -/******************* Bit definition for DMA_ISR register ********************/ -#define DMA_ISR_GIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt flag */ -#define DMA_ISR_TCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete flag */ -#define DMA_ISR_HTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer flag */ -#define DMA_ISR_TEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error flag */ -#define DMA_ISR_GIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt flag */ -#define DMA_ISR_TCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete flag */ -#define DMA_ISR_HTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer flag */ -#define DMA_ISR_TEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error flag */ -#define DMA_ISR_GIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt flag */ -#define DMA_ISR_TCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete flag */ -#define DMA_ISR_HTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer flag */ -#define DMA_ISR_TEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error flag */ -#define DMA_ISR_GIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt flag */ -#define DMA_ISR_TCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete flag */ -#define DMA_ISR_HTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer flag */ -#define DMA_ISR_TEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error flag */ -#define DMA_ISR_GIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt flag */ -#define DMA_ISR_TCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete flag */ -#define DMA_ISR_HTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer flag */ -#define DMA_ISR_TEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error flag */ -#define DMA_ISR_GIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt flag */ -#define DMA_ISR_TCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete flag */ -#define DMA_ISR_HTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer flag */ -#define DMA_ISR_TEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error flag */ -#define DMA_ISR_GIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt flag */ -#define DMA_ISR_TCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete flag */ -#define DMA_ISR_HTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer flag */ -#define DMA_ISR_TEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error flag */ - -/******************* Bit definition for DMA_IFCR register *******************/ -#define DMA_IFCR_CGIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt clearr */ -#define DMA_IFCR_CTCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete clear */ -#define DMA_IFCR_CHTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer clear */ -#define DMA_IFCR_CTEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error clear */ -#define DMA_IFCR_CGIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt clear */ -#define DMA_IFCR_CTCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete clear */ -#define DMA_IFCR_CHTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer clear */ -#define DMA_IFCR_CTEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error clear */ -#define DMA_IFCR_CGIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt clear */ -#define DMA_IFCR_CTCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete clear */ -#define DMA_IFCR_CHTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer clear */ -#define DMA_IFCR_CTEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error clear */ -#define DMA_IFCR_CGIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt clear */ -#define DMA_IFCR_CTCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete clear */ -#define DMA_IFCR_CHTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer clear */ -#define DMA_IFCR_CTEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error clear */ -#define DMA_IFCR_CGIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt clear */ -#define DMA_IFCR_CTCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete clear */ -#define DMA_IFCR_CHTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer clear */ -#define DMA_IFCR_CTEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error clear */ -#define DMA_IFCR_CGIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt clear */ -#define DMA_IFCR_CTCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete clear */ -#define DMA_IFCR_CHTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer clear */ -#define DMA_IFCR_CTEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error clear */ -#define DMA_IFCR_CGIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt clear */ -#define DMA_IFCR_CTCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete clear */ -#define DMA_IFCR_CHTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer clear */ -#define DMA_IFCR_CTEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error clear */ - -/******************* Bit definition for DMA_CCR1 register *******************/ -#define DMA_CCR1_EN ((uint16_t)0x0001) /*!< Channel enable*/ -#define DMA_CCR1_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ -#define DMA_CCR1_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ -#define DMA_CCR1_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ -#define DMA_CCR1_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ -#define DMA_CCR1_CIRC ((uint16_t)0x0020) /*!< Circular mode */ -#define DMA_CCR1_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ -#define DMA_CCR1_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ - -#define DMA_CCR1_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ -#define DMA_CCR1_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ -#define DMA_CCR1_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ - -#define DMA_CCR1_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ -#define DMA_CCR1_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ -#define DMA_CCR1_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ - -#define DMA_CCR1_PL ((uint16_t)0x3000) /*!< PL[1:0] bits(Channel Priority level) */ -#define DMA_CCR1_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ -#define DMA_CCR1_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ - -#define DMA_CCR1_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ - -/******************* Bit definition for DMA_CCR2 register *******************/ -#define DMA_CCR2_EN ((uint16_t)0x0001) /*!< Channel enable */ -#define DMA_CCR2_TCIE ((uint16_t)0x0002) /*!< ransfer complete interrupt enable */ -#define DMA_CCR2_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ -#define DMA_CCR2_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ -#define DMA_CCR2_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ -#define DMA_CCR2_CIRC ((uint16_t)0x0020) /*!< Circular mode */ -#define DMA_CCR2_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ -#define DMA_CCR2_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ - -#define DMA_CCR2_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ -#define DMA_CCR2_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ -#define DMA_CCR2_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ - -#define DMA_CCR2_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ -#define DMA_CCR2_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ -#define DMA_CCR2_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ - -#define DMA_CCR2_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ -#define DMA_CCR2_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ -#define DMA_CCR2_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ - -#define DMA_CCR2_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ - -/******************* Bit definition for DMA_CCR3 register *******************/ -#define DMA_CCR3_EN ((uint16_t)0x0001) /*!< Channel enable */ -#define DMA_CCR3_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ -#define DMA_CCR3_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ -#define DMA_CCR3_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ -#define DMA_CCR3_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ -#define DMA_CCR3_CIRC ((uint16_t)0x0020) /*!< Circular mode */ -#define DMA_CCR3_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ -#define DMA_CCR3_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ - -#define DMA_CCR3_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ -#define DMA_CCR3_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ -#define DMA_CCR3_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ - -#define DMA_CCR3_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ -#define DMA_CCR3_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ -#define DMA_CCR3_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ - -#define DMA_CCR3_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ -#define DMA_CCR3_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ -#define DMA_CCR3_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ - -#define DMA_CCR3_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ - -/*!<****************** Bit definition for DMA_CCR4 register *******************/ -#define DMA_CCR4_EN ((uint16_t)0x0001) /*!