diff --git a/os/hal/platforms/STM32/uart_lld.c b/os/hal/platforms/STM32/uart_lld.c index 02fc46bb7..88dd7d8a3 100644 --- a/os/hal/platforms/STM32/uart_lld.c +++ b/os/hal/platforms/STM32/uart_lld.c @@ -364,6 +364,7 @@ void uart_lld_init(void) { RCC->APB2RSTR = 0; uartObjectInit(&UARTD1); UARTD1.ud_usart = USART1; + UARTD1.ud_dmap = STM32_DMA1; UARTD1.ud_dmarx = STM32_DMA_CHANNEL_4; UARTD1.ud_dmatx = STM32_DMA_CHANNEL_5; UARTD1.ud_dmaccr = 0; @@ -374,6 +375,7 @@ void uart_lld_init(void) { RCC->APB1RSTR = 0; uartObjectInit(&UARTD2); UARTD2.ud_usart = USART2; + UARTD2.ud_dmap = STM32_DMA1; UARTD2.ud_dmarx = STM32_DMA_CHANNEL_6; UARTD2.ud_dmatx = STM32_DMA_CHANNEL_7; UARTD2.ud_dmaccr = 0; @@ -416,7 +418,7 @@ void uart_lld_start(UARTDriver *uartp) { /* Static DMA setup, the transfer size depends on the USART settings, it is 16 bits if M=1 and PCE=0 else it is 8 bits.*/ - uartp->ud_dmaccr = STM32_UART_USART1_DMA_PRIORITY << 12; + uartp->ud_dmaccr = STM32_UART_USART1_DMA_PRIORITY << 12; if ((uartp->ud_config->uc_cr1 & (USART_CR1_M | USART_CR1_PCE)) == USART_CR1_M) uartp->ud_dmaccr |= DMA_CCR1_MSIZE_0 | DMA_CCR1_PSIZE_0; uartp->ud_dmap->channels[uartp->ud_dmarx].CPAR = (uint32_t)&uartp->ud_usart->DR; @@ -475,7 +477,8 @@ void uart_lld_start_send(UARTDriver *uartp, size_t n, const void *txbuf) { /* TX DMA channel preparation and start.*/ dmaSetupChannel(uartp->ud_dmap, uartp->ud_dmatx, n, txbuf, - uartp->ud_dmaccr | DMA_CCR1_TEIE | DMA_CCR1_TCIE); + uartp->ud_dmaccr | DMA_CCR1_DIR | + DMA_CCR1_TEIE | DMA_CCR1_TCIE); dmaEnableChannel(uartp->ud_dmap, uartp->ud_dmatx); } diff --git a/testhal/STM32/UART/Makefile b/testhal/STM32/UART/Makefile new file mode 100644 index 000000000..76a8c978e --- /dev/null +++ b/testhal/STM32/UART/Makefile @@ -0,0 +1,205 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable register caching optimization (read documentation). +ifeq ($(USE_CURRP_CACHING),) + USE_CURRP_CACHING = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Enable this if you really want to use the STM FWLib. +ifeq ($(USE_FWLIB),) + USE_FWLIB = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Define linker script file here +LDSCRIPT= ch.ld + +# Imported source files +CHIBIOS = ../../.. +include $(CHIBIOS)/boards/OLIMEX_STM32_P103/board.mk +include $(CHIBIOS)/os/hal/platforms/STM32/platform.mk +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F10x/port.mk +include $(CHIBIOS)/os/kernel/kernel.mk +include $(CHIBIOS)/test/test.mk + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + $(CHIBIOS)/os/various/evtimer.c \ + $(CHIBIOS)/os/various/syscalls.c \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) \ + $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F10x/vectors.s + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m3 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of default section +# + +# List all default C defines here, like -D_DEBUG=1 +DDEFS = -DCORTEX_USE_BASEPRI=TRUE + +# List all default ASM defines here, like -D_DEBUG=1 +DADEFS = + +# List all default directories to look for include files here +DINCDIR = + +# List the default directory to look for the libraries here +DLIBDIR = + +# List all default libraries here +DLIBS = + +# +# End of default section +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +ifeq ($(USE_FWLIB),yes) + include $(CHIBIOS)/ext/stm32lib/stm32lib.mk + CSRC += $(STM32SRC) + INCDIR += $(STM32INC) + USE_OPT += -DUSE_STDPERIPH_DRIVER +endif + +include $(CHIBIOS)/os/ports/GCC/ARM/rules.mk diff --git a/testhal/STM32/UART/ch.ld b/testhal/STM32/UART/ch.ld new file mode 100644 index 000000000..44f494121 --- /dev/null +++ b/testhal/STM32/UART/ch.ld @@ -0,0 +1,113 @@ +/* + ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +/* + * ST32F103 memory setup. + */ +__main_stack_size__ = 0x0400; +__process_stack_size__ = 0x0400; +__stacks_total_size__ = __main_stack_size__ + __process_stack_size__; + +MEMORY +{ + flash : org = 0x08000000, len = 128k + ram : org = 0x20000000, len = 20k +} + +__ram_start__ = ORIGIN(ram); +__ram_size__ = LENGTH(ram); +__ram_end__ = __ram_start__ + __ram_size__; + +SECTIONS +{ + . = 0; + + .text : ALIGN(16) SUBALIGN(16) + { + _text = .; + KEEP(*(vectors)) + *(.text) + *(.text.*) + *(.rodata) + *(.rodata.*) + *(.glue_7t) + *(.glue_7) + *(.gcc*) + } > flash + + .ctors : + { + PROVIDE(_ctors_start_ = .); + KEEP(*(SORT(.ctors.*))) + KEEP(*(.ctors)) + PROVIDE(_ctors_end_ = .); + } > flash + + .dtors : + { + PROVIDE(_dtors_start_ = .); + KEEP(*(SORT(.dtors.*))) + KEEP(*(.dtors)) + PROVIDE(_dtors_end_ = .); + } > flash + + .ARM.extab : {*(.ARM.extab* .gnu.linkonce.armextab.*)} + + __exidx_start = .; + .ARM.exidx : {*(.ARM.exidx* .gnu.linkonce.armexidx.*)} > flash + __exidx_end = .; + + .eh_frame_hdr : {*(.eh_frame_hdr)} + + .eh_frame : ONLY_IF_RO {*(.eh_frame)} + + . = ALIGN(4); + _etext = .; + _textdata = _etext; + + .data : + { + _data = .; + *(.data) + . = ALIGN(4); + *(.data.*) + . = ALIGN(4); + *(.ramtext) + . = ALIGN(4); + _edata = .; + } > ram AT > flash + + .bss : + { + _bss_start = .; + *(.bss) + . = ALIGN(4); + *(.bss.*) + . = ALIGN(4); + *(COMMON) + . = ALIGN(4); + _bss_end = .; + } > ram +} + +PROVIDE(end = .); +_end = .; + +__heap_base__ = _end; +__heap_end__ = __ram_end__ - __stacks_total_size__; diff --git a/testhal/STM32/UART/chconf.h b/testhal/STM32/UART/chconf.h new file mode 100644 index 000000000..6522e0b3b --- /dev/null +++ b/testhal/STM32/UART/chconf.h @@ -0,0 +1,487 @@ +/* + ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/* Kernel parameters. */ +/*===========================================================================*/ + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) +#define CH_FREQUENCY 1000 +#endif + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + */ +#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) +#define CH_TIME_QUANTUM 20 +#endif + +/** + * @brief Nested locks. + * @details If enabled then the use of nested @p chSysLock() / @p chSysUnlock() + * operations is allowed.
+ * For performance and code size reasons the recommended setting + * is to leave this option disabled.
+ * You may use this option if you need to merge ChibiOS/RT with + * external libraries that require nested lock/unlock operations. + * + * @note T he default is @p FALSE. + */ +#if !defined(CH_USE_NESTED_LOCKS) || defined(__DOXYGEN__) +#define CH_USE_NESTED_LOCKS FALSE +#endif + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_USE_COREMEM. + */ +#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) +#define CH_MEMCORE_SIZE 0 +#endif + +/*===========================================================================*/ +/* Performance options. */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) +#define CH_OPTIMIZE_SPEED TRUE +#endif + +/** + * @brief Exotic optimization. + * @details If defined then a CPU register is used as storage for the global + * @p currp variable. Caching this variable in a register greatly + * improves both space and time OS efficiency. A side effect is that + * one less register has to be saved during the context switch + * resulting in lower RAM usage and faster context switch. + * + * @note This option is only usable with the GCC compiler and is only useful + * on processors with many registers like ARM cores. + * @note If this option is enabled then ALL the libraries linked to the + * ChibiOS/RT code must be recompiled with the GCC option @p + * -ffixed-@. + * @note This option must be enabled in the Makefile, it is listed here for + * documentation only. + */ +#if defined(__DOXYGEN__) +#define CH_CURRP_REGISTER_CACHE "reg" +#endif + +/*===========================================================================*/ +/* Subsystem options. */ +/*===========================================================================*/ + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) +#define CH_USE_REGISTRY TRUE +#endif + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) +#define CH_USE_WAITEXIT TRUE +#endif + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) +#define CH_USE_SEMAPHORES TRUE +#endif + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special requirements. + * @note Requires @p CH_USE_SEMAPHORES. + */ +#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) +#define CH_USE_SEMAPHORES_PRIORITY FALSE +#endif + +/** + * @brief Atomic semaphore API. + * @details If enabled then the semaphores the @p chSemSignalWait() API + * is included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_USE_SEMAPHORES. + */ +#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) +#define CH_USE_SEMSW TRUE +#endif + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) +#define CH_USE_MUTEXES TRUE +#endif + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_USE_MUTEXES. + */ +#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) +#define CH_USE_CONDVARS TRUE +#endif + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_USE_CONDVARS. + */ +#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) +#define CH_USE_CONDVARS_TIMEOUT TRUE +#endif + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) +#define CH_USE_EVENTS TRUE +#endif + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_USE_EVENTS. + */ +#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) +#define CH_USE_EVENTS_TIMEOUT TRUE +#endif + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) +#define CH_USE_MESSAGES TRUE +#endif + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special requirements. + * @note Requires @p CH_USE_MESSAGES. + */ +#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) +#define CH_USE_MESSAGES_PRIORITY FALSE +#endif + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_USE_SEMAPHORES. + */ +#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) +#define CH_USE_MAILBOXES TRUE +#endif + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_USE_SEMAPHORES. + */ +#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) +#define CH_USE_QUEUES TRUE +#endif + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) +#define CH_USE_MEMCORE TRUE +#endif + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_USE_COREMEM and either @p CH_USE_MUTEXES or + * @p CH_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) +#define CH_USE_HEAP TRUE +#endif + +/** + * @brief C-runtime allocator. + * @details If enabled the the heap allocator APIs just wrap the C-runtime + * @p malloc() and @p free() functions. + * + * @note The default is @p FALSE. + * @note Requires @p CH_USE_HEAP. + * @note The C-runtime may or may not require @p CH_USE_COREMEM, see the + * appropriate documentation. + */ +#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) +#define CH_USE_MALLOC_HEAP FALSE +#endif + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) +#define CH_USE_MEMPOOLS TRUE +#endif + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_USE_WAITEXIT. + * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. + */ +#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) +#define CH_USE_DYNAMIC TRUE +#endif + +/*===========================================================================*/ +/* Debug options. */ +/*===========================================================================*/ + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) +#define CH_DBG_ENABLE_CHECKS FALSE +#endif + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) +#define CH_DBG_ENABLE_ASSERTS FALSE +#endif + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) +#define CH_DBG_ENABLE_TRACE FALSE +#endif + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) +#define CH_DBG_ENABLE_STACK_CHECK FALSE +#endif + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) +#define CH_DBG_FILL_THREADS FALSE +#endif + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p Thread structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p TRUE. + * @note This debug option is defaulted to TRUE because it is required by + * some test cases into the test suite. + */ +#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) +#define CH_DBG_THREADS_PROFILING TRUE +#endif + +/*===========================================================================*/ +/* Kernel hooks. */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure hook. + * @details User fields added to the end of the @p Thread structure. + */ +#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) +#define THREAD_EXT_FIELDS \ +struct { \ + /* Add threads custom fields here.*/ \ +}; +#endif + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitily from all + * the threads creation APIs. + */ +#if !defined(THREAD_EXT_INIT) || defined(__DOXYGEN__) +#define THREAD_EXT_INIT(tp) { \ + /* Add threads initialization code here.*/ \ +} +#endif + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#if !defined(THREAD_EXT_EXIT) || defined(__DOXYGEN__) +#define THREAD_EXT_EXIT(tp) { \ + /* Add threads finalization code here.*/ \ +} +#endif + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) +#define IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} +#endif + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/UART/halconf.h b/testhal/STM32/UART/halconf.h new file mode 100644 index 000000000..f317ce69a --- /dev/null +++ b/testhal/STM32/UART/halconf.h @@ -0,0 +1,163 @@ +/* + ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @addtogroup HAL_CONF + * @{ + */ + +/* + * HAL configuration file, this file allows to enable or disable the various + * device drivers from your application. You may also use this file in order + * to override the device drivers default settings. + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +/* + * Uncomment the following line in order to include a mcu-related + * settings file. This file can be used to include platform specific + * header files or to override the low level drivers settings. + */ +#include "mcuconf.h" + +/*===========================================================================*/ +/* PAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(CH_HAL_USE_PAL) || defined(__DOXYGEN__) +#define CH_HAL_USE_PAL TRUE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(CH_HAL_USE_ADC) || defined(__DOXYGEN__) +#define CH_HAL_USE_ADC FALSE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(CH_HAL_USE_CAN) || defined(__DOXYGEN__) +#define CH_HAL_USE_CAN FALSE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(CH_HAL_USE_MAC) || defined(__DOXYGEN__) +#define CH_HAL_USE_MAC FALSE +#endif + +/*===========================================================================*/ +/* PWM driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(CH_HAL_USE_PWM) || defined(__DOXYGEN__) +#define CH_HAL_USE_PWM FALSE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(CH_HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define CH_HAL_USE_SERIAL FALSE +#endif + +/* + * Default SERIAL settings overrides (uncomment to override). + */ +/*#define SERIAL_DEFAULT_BITRATE 38400*/ +/*#define SERIAL_BUFFERS_SIZE 64*/ + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(CH_HAL_USE_SPI) || defined(__DOXYGEN__) +#define CH_HAL_USE_SPI FALSE +#endif + +/* + * Default SPI settings overrides (uncomment to override). + */ +/*#define SPI_USE_MUTUAL_EXCLUSION TRUE*/ + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(CH_HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define CH_HAL_USE_MMC_SPI FALSE +#endif + +/* + * Default MMC_SPI settings overrides (uncomment to override). + */ +/*#define MMC_SECTOR_SIZE 512*/ +/*#define MMC_NICE_WAITING TRUE*/ +/*#define MMC_POLLING_INTERVAL 10*/ +/*#define MMC_POLLING_DELAY 10*/ + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(CH_HAL_USE_UART) || defined(__DOXYGEN__) +#define CH_HAL_USE_UART TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/UART/main.c b/testhal/STM32/UART/main.c new file mode 100644 index 000000000..1683c9774 --- /dev/null +++ b/testhal/STM32/UART/main.c @@ -0,0 +1,86 @@ +/* + ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +#include "ch.h" +#include "hal.h" + +static void txend1(void) { + +} + +static void txend2(void) { + +} + +static UARTConfig uart_cfg_1 = { + txend1, + txend2, + NULL, + NULL, + NULL, + 38400, + 0, + USART_CR2_LINEN, + 0 +}; + +/* + * Red LEDs blinker thread, times are in milliseconds. + */ +static WORKING_AREA(waThread1, 128); +static msg_t Thread1(void *arg) { + + (void)arg; + while (TRUE) { + palClearPad(IOPORT3, GPIOC_LED); + chThdSleepMilliseconds(500); + palSetPad(IOPORT3, GPIOC_LED); + chThdSleepMilliseconds(500); + } + return 0; +} + +/* + * Entry point, note, the main() function is already a thread in the system + * on entry. + */ +int main(int argc, char **argv) { + + (void)argc; + (void)argv; + + /* + * Activates the serial driver 2 using the driver default configuration. + */ + uartStart(&UARTD2, &uart_cfg_1); + + /* + * Creates the blinker thread. + */ + chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); + + /* + * Normal main() thread activity, in this demo it does nothing except + * sleeping in a loop and check the button state. + */ + while (TRUE) { + chThdSleepMilliseconds(500); + } + return 0; +} diff --git a/testhal/STM32/UART/mcuconf.h b/testhal/STM32/UART/mcuconf.h new file mode 100644 index 000000000..2b5bd9aa7 --- /dev/null +++ b/testhal/STM32/UART/mcuconf.h @@ -0,0 +1,114 @@ +/* + ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +/* + * STM32 drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the driver + * is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +/* + * HAL driver system settings. + */ +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_MCO STM32_MCO_NOCLOCK + +/* + * ADC driver system settings. + */ +#define USE_STM32_ADC1 TRUE +#define STM32_ADC1_DMA_PRIORITY 3 +#define STM32_ADC1_IRQ_PRIORITY 5 +#define STM32_ADC1_DMA_ERROR_HOOK() chSysHalt() + +/* + * CAN driver system settings. + */ +#define USE_STM32_CAN1 TRUE +#define STM32_CAN1_IRQ_PRIORITY 11 + +/* + * PWM driver system settings. + */ +#define USE_STM32_PWM1 TRUE +#define USE_STM32_PWM2 FALSE +#define USE_STM32_PWM3 FALSE +#define USE_STM32_PWM4 FALSE +#define STM32_PWM1_IRQ_PRIORITY 7 +#define STM32_PWM2_IRQ_PRIORITY 7 +#define STM32_PWM3_IRQ_PRIORITY 7 +#define STM32_PWM4_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define USE_STM32_USART1 FALSE +#define USE_STM32_USART2 FALSE +#define USE_STM32_USART3 FALSE +#if defined(STM32F10X_HD) || defined(STM32F10X_CL) +#define USE_STM32_UART4 FALSE +#define USE_STM32_UART5 FALSE +#endif +#define STM32_USART1_PRIORITY 12 +#define STM32_USART2_PRIORITY 12 +#define STM32_USART3_PRIORITY 12 +#if defined(STM32F10X_HD) || defined(STM32F10X_CL) +#define STM32_UART4_PRIORITY 12 +#define STM32_UART5_PRIORITY 12 +#endif + +/* + * SPI driver system settings. + */ +#define USE_STM32_SPI1 TRUE +#define USE_STM32_SPI2 TRUE +#define STM32_SPI1_DMA_PRIORITY 2 +#define STM32_SPI2_DMA_PRIORITY 2 +#define STM32_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI1_DMA_ERROR_HOOK() chSysHalt() + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 TRUE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK() chSysHalt()