diff --git a/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/chconf.h b/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/chconf.h
index de3797f02..32a7ac145 100644
--- a/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/chconf.h
+++ b/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/chconf.h
@@ -46,7 +46,7 @@
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
-#define CH_CFG_ST_FREQUENCY 10000
+#define CH_CFG_ST_FREQUENCY 2000
/**
* @brief Time delta constant for the tick-less mode.
diff --git a/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/mcuconf.h b/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/mcuconf.h
index 66348b688..a9529b8cc 100644
--- a/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/mcuconf.h
+++ b/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/mcuconf.h
@@ -175,6 +175,12 @@
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY 8
+#define STM32_ST_USE_TIMER 2
+
/*
* UART driver system settings.
*/
diff --git a/demos/STM32/RT-STM32F103RB-NUCLEO/mcuconf.h b/demos/STM32/RT-STM32F103RB-NUCLEO/mcuconf.h
index 43d829a6f..58a3389c7 100644
--- a/demos/STM32/RT-STM32F103RB-NUCLEO/mcuconf.h
+++ b/demos/STM32/RT-STM32F103RB-NUCLEO/mcuconf.h
@@ -175,6 +175,12 @@
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY 8
+#define STM32_ST_USE_TIMER 2
+
/*
* UART driver system settings.
*/
diff --git a/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/.project b/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/.project
index b9debed45..052c359ba 100644
--- a/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/.project
+++ b/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/.project
@@ -27,7 +27,7 @@
board
2
- CHIBIOS/boards/ST_INEMO_M1_DISCOVERY
+ CHIBIOS/os/hal/boards/ST_INEMO_M1_DISCOVERY
os
diff --git a/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/Makefile b/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/Makefile
index 3aedb30c5..fac6c60c9 100644
--- a/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/Makefile
+++ b/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/Makefile
@@ -30,7 +30,7 @@ endif
# Enable this if you want link time optimizations (LTO)
ifeq ($(USE_LTO),)
- USE_LTO = no
+ USE_LTO = yes
endif
# If enabled, this option allows to compile the application in THUMB mode.
@@ -51,6 +51,23 @@ endif
# Architecture or project specific options
#
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+ USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+ USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4.
+ifeq ($(USE_FPU),)
+ USE_FPU = no
+endif
+
#
# Architecture or project specific options
##############################################################################
@@ -63,13 +80,14 @@ endif
PROJECT = ch
# Imported source files and paths
-CHIBIOS = ../..
-include $(CHIBIOS)/boards/ST_INEMO_M1_DISCOVERY/board.mk
-include $(CHIBIOS)/os/hal/platforms/STM32F1xx/platform.mk
+CHIBIOS = ../../..
include $(CHIBIOS)/os/hal/hal.mk
-include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F1xx/port.mk
-include $(CHIBIOS)/os/kernel/kernel.mk
-include $(CHIBIOS)/test/test.mk
+include $(CHIBIOS)/os/hal/boards/ST_INEMO_M1_DISCOVERY/board.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F1xx/platform.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f1xx.mk
+include $(CHIBIOS)/test/rt/test.mk
# Define linker script file here
LDSCRIPT= $(PORTLD)/STM32F103xE.ld
@@ -80,12 +98,12 @@ CSRC = $(PORTSRC) \
$(KERNSRC) \
$(TESTSRC) \
$(HALSRC) \
+ $(OSALSRC) \
$(PLATFORMSRC) \
$(BOARDSRC) \
$(CHIBIOS)/os/various/shell.c \
$(CHIBIOS)/os/various/chprintf.c \
- $(CHIBIOS)/os/various/memstreams.c \
- main.c
+ usbcfg.c main.c
# C++ sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
@@ -115,7 +133,7 @@ TCPPSRC =
ASMSRC = $(PORTASM)
INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \
- $(HALINC) $(PLATFORMINC) $(BOARDINC) \
+ $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \
$(CHIBIOS)/os/various
#
@@ -139,6 +157,7 @@ LD = $(TRGT)gcc
#LD = $(TRGT)g++
CP = $(TRGT)objcopy
AS = $(TRGT)gcc -x assembler-with-cpp
+AR = $(TRGT)ar
OD = $(TRGT)objdump
SZ = $(TRGT)size
HEX = $(CP) -O ihex
@@ -160,29 +179,6 @@ CPPWARN = -Wall -Wextra
# Compiler settings
##############################################################################
-##############################################################################
-# Start of default section
-#
-
-# List all default C defines here, like -D_DEBUG=1
-DDEFS =
-
-# List all default ASM defines here, like -D_DEBUG=1
-DADEFS =
-
-# List all default directories to look for include files here
-DINCDIR =
-
-# List the default directory to look for the libraries here
-DLIBDIR =
-
-# List all default libraries here
-DLIBS =
-
-#
-# End of default section
-##############################################################################
-
##############################################################################
# Start of user section
#
@@ -206,5 +202,5 @@ ULIBS =
# End of user defines
##############################################################################
-RULESPATH = $(CHIBIOS)/os/ports/GCC/ARMCMx
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
include $(RULESPATH)/rules.mk
diff --git a/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/chconf.h b/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/chconf.h
index 2e6fcc6ee..32a7ac145 100644
--- a/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/chconf.h
+++ b/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/chconf.h
@@ -1,5 +1,5 @@
/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006-2014 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -30,19 +30,42 @@
/*===========================================================================*/
/**
- * @name Kernel parameters and options
+ * @name System timers settings
* @{
*/
/*===========================================================================*/
+/**
+ * @brief System time counter resolution.
+ * @note Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION 16
+
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
-#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__)
-#define CH_FREQUENCY 1000
-#endif
+#define CH_CFG_ST_FREQUENCY 2000
+
+/**
+ * @brief Time delta constant for the tick-less mode.
+ * @note If this value is zero then the system uses the classic
+ * periodic tick. This value represents the minimum number
+ * of ticks that is safe to specify in a timeout directive.
+ * The value one is not valid, timeouts are rounded up to
+ * this value.
+ */
+#define CH_CFG_ST_TIMEDELTA 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
/**
* @brief Round robin interval.
@@ -51,13 +74,12 @@
* disables the preemption for threads with equal priority and the
* round robin becomes cooperative. Note that higher priority
* threads can still preempt, the kernel is always preemptive.
- *
* @note Disabling the round robin preemption makes the kernel more compact
* and generally faster.
+ * @note The round robin preemption is not supported in tickless mode and
+ * must be set to zero in that case.
*/
-#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__)
-#define CH_TIME_QUANTUM 20
-#endif
+#define CH_CFG_TIME_QUANTUM 0
/**
* @brief Managed RAM size.
@@ -68,28 +90,17 @@
*
* @note In order to let the OS manage the whole RAM the linker script must
* provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note Requires @p CH_USE_MEMCORE.
+ * @note Requires @p CH_CFG_USE_MEMCORE.
*/
-#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__)
-#define CH_MEMCORE_SIZE 0
-#endif
+#define CH_CFG_MEMCORE_SIZE 0
/**
* @brief Idle thread automatic spawn suppression.
* @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread automatically. The application has
- * then the responsibility to do one of the following:
- * - Spawn a custom idle thread at priority @p IDLEPRIO.
- * - Change the main() thread priority to @p IDLEPRIO then enter
- * an endless loop. In this scenario the @p main() thread acts as
- * the idle thread.
- * .
- * @note Unless an idle thread is spawned the @p main() thread must not
- * enter a sleep state.
- */
-#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__)
-#define CH_NO_IDLE_THREAD FALSE
-#endif
+ * does not spawn the idle thread. The application @p main()
+ * function becomes the idle thread and must implement an
+ * infinite loop. */
+#define CH_CFG_NO_IDLE_THREAD FALSE
/** @} */
@@ -108,9 +119,7 @@
* @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
-#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__)
-#define CH_OPTIMIZE_SPEED TRUE
-#endif
+#define CH_CFG_OPTIMIZE_SPEED TRUE
/** @} */
@@ -121,15 +130,22 @@
*/
/*===========================================================================*/
+/**
+ * @brief Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ * the kernel.
+ *
+ * @note The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM TRUE
+
/**
* @brief Threads registry APIs.
* @details If enabled then the registry APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
-#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__)
-#define CH_USE_REGISTRY TRUE
-#endif
+#define CH_CFG_USE_REGISTRY TRUE
/**
* @brief Threads synchronization APIs.
@@ -138,9 +154,7 @@
*
* @note The default is @p TRUE.
*/
-#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__)
-#define CH_USE_WAITEXIT TRUE
-#endif
+#define CH_CFG_USE_WAITEXIT TRUE
/**
* @brief Semaphores APIs.
@@ -148,33 +162,18 @@
*
* @note The default is @p TRUE.
*/
-#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__)
-#define CH_USE_SEMAPHORES TRUE
-#endif
+#define CH_CFG_USE_SEMAPHORES TRUE
/**
* @brief Semaphores queuing mode.
* @details If enabled then the threads are enqueued on semaphores by
* priority rather than in FIFO order.
*
- * @note The default is @p FALSE. Enable this if you have special requirements.
- * @note Requires @p CH_USE_SEMAPHORES.
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
-#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__)
-#define CH_USE_SEMAPHORES_PRIORITY FALSE
-#endif
-
-/**
- * @brief Atomic semaphore API.
- * @details If enabled then the semaphores the @p chSemSignalWait() API
- * is included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_SEMAPHORES.
- */
-#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__)
-#define CH_USE_SEMSW TRUE
-#endif
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
/**
* @brief Mutexes APIs.
@@ -182,9 +181,17 @@
*
* @note The default is @p TRUE.
*/
-#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__)
-#define CH_USE_MUTEXES TRUE
-#endif
+#define CH_CFG_USE_MUTEXES TRUE
+
+/**
+ * @brief Enables recursive behavior on mutexes.
+ * @note Recursive mutexes are heavier and have an increased
+ * memory footprint.
+ *
+ * @note The default is @p FALSE.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
/**
* @brief Conditional Variables APIs.
@@ -192,11 +199,9 @@
* in the kernel.
*
* @note The default is @p TRUE.
- * @note Requires @p CH_USE_MUTEXES.
+ * @note Requires @p CH_CFG_USE_MUTEXES.
*/
-#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__)
-#define CH_USE_CONDVARS TRUE
-#endif
+#define CH_CFG_USE_CONDVARS TRUE
/**
* @brief Conditional Variables APIs with timeout.
@@ -204,11 +209,9 @@
* specification are included in the kernel.
*
* @note The default is @p TRUE.
- * @note Requires @p CH_USE_CONDVARS.
+ * @note Requires @p CH_CFG_USE_CONDVARS.
*/
-#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__)
-#define CH_USE_CONDVARS_TIMEOUT TRUE
-#endif
+#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
/**
* @brief Events Flags APIs.
@@ -216,9 +219,7 @@
*
* @note The default is @p TRUE.
*/
-#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__)
-#define CH_USE_EVENTS TRUE
-#endif
+#define CH_CFG_USE_EVENTS TRUE
/**
* @brief Events Flags APIs with timeout.
@@ -226,11 +227,9 @@
* are included in the kernel.
*
* @note The default is @p TRUE.
- * @note Requires @p CH_USE_EVENTS.
+ * @note Requires @p CH_CFG_USE_EVENTS.
*/
-#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__)
-#define CH_USE_EVENTS_TIMEOUT TRUE
-#endif
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
/**
* @brief Synchronous Messages APIs.
@@ -239,21 +238,18 @@
*
* @note The default is @p TRUE.
*/
-#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__)
-#define CH_USE_MESSAGES TRUE
-#endif
+#define CH_CFG_USE_MESSAGES TRUE
/**
* @brief Synchronous Messages queuing mode.
* @details If enabled then messages are served by priority rather than in
* FIFO order.
*
- * @note The default is @p FALSE. Enable this if you have special requirements.
- * @note Requires @p CH_USE_MESSAGES.
+ * @note The default is @p FALSE. Enable this if you have special
+ * requirements.
+ * @note Requires @p CH_CFG_USE_MESSAGES.
*/
-#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__)
-#define CH_USE_MESSAGES_PRIORITY FALSE
-#endif
+#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
/**
* @brief Mailboxes APIs.
@@ -261,11 +257,9 @@
* included in the kernel.
*
* @note The default is @p TRUE.
- * @note Requires @p CH_USE_SEMAPHORES.
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
-#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__)
-#define CH_USE_MAILBOXES TRUE
-#endif
+#define CH_CFG_USE_MAILBOXES TRUE
/**
* @brief I/O Queues APIs.
@@ -273,9 +267,7 @@
*
* @note The default is @p TRUE.
*/
-#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__)
-#define CH_USE_QUEUES TRUE
-#endif
+#define CH_CFG_USE_QUEUES TRUE
/**
* @brief Core Memory Manager APIs.
@@ -284,9 +276,7 @@
*
* @note The default is @p TRUE.
*/
-#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__)
-#define CH_USE_MEMCORE TRUE
-#endif
+#define CH_CFG_USE_MEMCORE TRUE
/**
* @brief Heap Allocator APIs.
@@ -294,27 +284,11 @@
* in the kernel.
*
* @note The default is @p TRUE.
- * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or
- * @p CH_USE_SEMAPHORES.
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ * @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
-#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__)
-#define CH_USE_HEAP TRUE
-#endif
-
-/**
- * @brief C-runtime allocator.
- * @details If enabled the the heap allocator APIs just wrap the C-runtime
- * @p malloc() and @p free() functions.
- *
- * @note The default is @p FALSE.
- * @note Requires @p CH_USE_HEAP.
- * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the
- * appropriate documentation.
- */
-#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__)
-#define CH_USE_MALLOC_HEAP FALSE
-#endif
+#define CH_CFG_USE_HEAP TRUE
/**
* @brief Memory Pools Allocator APIs.
@@ -323,9 +297,7 @@
*
* @note The default is @p TRUE.
*/
-#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__)
-#define CH_USE_MEMPOOLS TRUE
-#endif
+#define CH_CFG_USE_MEMPOOLS TRUE
/**
* @brief Dynamic Threads APIs.
@@ -333,12 +305,10 @@
* in the kernel.
*
* @note The default is @p TRUE.
- * @note Requires @p CH_USE_WAITEXIT.
- * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS.
+ * @note Requires @p CH_CFG_USE_WAITEXIT.
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
-#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__)
-#define CH_USE_DYNAMIC TRUE
-#endif
+#define CH_CFG_USE_DYNAMIC TRUE
/** @} */
@@ -349,6 +319,13 @@
*/
/*===========================================================================*/
+/**
+ * @brief Debug option, kernel statistics.
+ *
+ * @note The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS FALSE
+
/**
* @brief Debug option, system state check.
* @details If enabled the correct call protocol for system APIs is checked
@@ -356,9 +333,7 @@
*
* @note The default is @p FALSE.
*/
-#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__)
-#define CH_DBG_SYSTEM_STATE_CHECK TRUE
-#endif
+#define CH_DBG_SYSTEM_STATE_CHECK FALSE
/**
* @brief Debug option, parameters checks.
@@ -367,9 +342,7 @@
*
* @note The default is @p FALSE.
*/
-#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_CHECKS TRUE
-#endif
+#define CH_DBG_ENABLE_CHECKS FALSE
/**
* @brief Debug option, consistency checks.
@@ -379,9 +352,7 @@
*
* @note The default is @p FALSE.
*/
-#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_ASSERTS TRUE
-#endif
+#define CH_DBG_ENABLE_ASSERTS FALSE
/**
* @brief Debug option, trace buffer.
@@ -390,9 +361,7 @@
*
* @note The default is @p FALSE.
*/
-#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_TRACE TRUE
-#endif
+#define CH_DBG_ENABLE_TRACE FALSE
/**
* @brief Debug option, stack checks.
@@ -404,9 +373,7 @@
* @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
-#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_STACK_CHECK TRUE
-#endif
+#define CH_DBG_ENABLE_STACK_CHECK FALSE
/**
* @brief Debug option, stacks initialization.
@@ -416,22 +383,18 @@
*
* @note The default is @p FALSE.
*/
-#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__)
-#define CH_DBG_FILL_THREADS TRUE
-#endif
+#define CH_DBG_FILL_THREADS FALSE
/**
* @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p Thread structure that
+ * @details If enabled then a field is added to the @p thread_t structure that
* counts the system ticks occurred while executing the thread.
*
- * @note The default is @p TRUE.
- * @note This debug option is defaulted to TRUE because it is required by
- * some test cases into the test suite.
+ * @note The default is @p FALSE.
+ * @note This debug option is not currently compatible with the
+ * tickless mode.
*/
-#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__)
-#define CH_DBG_THREADS_PROFILING TRUE
-#endif
+#define CH_DBG_THREADS_PROFILING FALSE
/** @} */
@@ -444,12 +407,10 @@
/**
* @brief Threads descriptor structure extension.
- * @details User fields added to the end of the @p Thread structure.
+ * @details User fields added to the end of the @p thread_t structure.
*/
-#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__)
-#define THREAD_EXT_FIELDS \
+#define CH_CFG_THREAD_EXTRA_FIELDS \
/* Add threads custom fields here.*/
-#endif
/**
* @brief Threads initialization hook.
@@ -458,11 +419,9 @@
* @note It is invoked from within @p chThdInit() and implicitly from all
* the threads creation APIs.
*/
-#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__)
-#define THREAD_EXT_INIT_HOOK(tp) { \
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \
/* Add threads initialization code here.*/ \
}
-#endif
/**
* @brief Threads finalization hook.
@@ -472,53 +431,61 @@
* @note It is also invoked when the threads simply return in order to
* terminate.
*/
-#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__)
-#define THREAD_EXT_EXIT_HOOK(tp) { \
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
}
-#endif
/**
* @brief Context switch hook.
* @details This hook is invoked just before switching between threads.
*/
-#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__)
-#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
/* System halt code here.*/ \
}
-#endif
+
+/**
+ * @brief Idle thread enter hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() { \
+}
+
+/**
+ * @brief Idle thread leave hook.
+ * @note This hook is invoked within a critical zone, no OS functions
+ * should be invoked from here.
+ * @note This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() { \
+}
/**
* @brief Idle Loop hook.
* @details This hook is continuously invoked by the idle thread loop.
*/
-#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__)
-#define IDLE_LOOP_HOOK() { \
+#define CH_CFG_IDLE_LOOP_HOOK() { \
/* Idle loop code here.*/ \
}
-#endif
/**
* @brief System tick event hook.
* @details This hook is invoked in the system tick handler immediately
* after processing the virtual timers queue.
*/
-#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__)
-#define SYSTEM_TICK_EVENT_HOOK() { \
+#define CH_CFG_SYSTEM_TICK_HOOK() { \
/* System tick event code here.*/ \
}
-#endif
/**
* @brief System halt hook.
* @details This hook is invoked in case to a system halting error before
* the system is halted.
*/
-#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__)
-#define SYSTEM_HALT_HOOK() { \
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
/* System halt code here.*/ \
}
-#endif
/** @} */
diff --git a/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/halconf.h b/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/halconf.h
index cd76b0cfe..7498bbe4d 100644
--- a/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/halconf.h
+++ b/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/halconf.h
@@ -1,5 +1,5 @@
/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006-2014 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -30,13 +30,6 @@
#include "mcuconf.h"
-/**
- * @brief Enables the TM subsystem.
- */
-#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)
-#define HAL_USE_TM TRUE
-#endif
-
/**
* @brief Enables the PAL subsystem.
*/
@@ -79,6 +72,13 @@
#define HAL_USE_I2C FALSE
#endif
+/**
+ * @brief Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S FALSE
+#endif
+
/**
* @brief Enables the ICU subsystem.
*/
diff --git a/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/main.c b/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/main.c
index b6383f3de..9c1c64f74 100644
--- a/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/main.c
+++ b/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/main.c
@@ -24,316 +24,17 @@
#include "shell.h"
#include "chprintf.h"
-/*===========================================================================*/
-/* USB related stuff. */
-/*===========================================================================*/
+#include "usbcfg.h"
-/*
- * Endpoints to be used for USBD1.
- */
-#define USBD1_DATA_REQUEST_EP 1
-#define USBD1_DATA_AVAILABLE_EP 1
-#define USBD1_INTERRUPT_REQUEST_EP 2
-
-/*
- * Serial over USB Driver structure.
- */
-static SerialUSBDriver SDU1;
-
-/*
- * USB Device Descriptor.
- */
-static const uint8_t vcom_device_descriptor_data[18] = {
- USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */
- 0x02, /* bDeviceClass (CDC). */
- 0x00, /* bDeviceSubClass. */
- 0x00, /* bDeviceProtocol. */
- 0x40, /* bMaxPacketSize. */
- 0x0483, /* idVendor (ST). */
- 0x5740, /* idProduct. */
- 0x0200, /* bcdDevice. */
- 1, /* iManufacturer. */
- 2, /* iProduct. */
- 3, /* iSerialNumber. */
- 1) /* bNumConfigurations. */
-};
-
-/*
- * Device Descriptor wrapper.
- */
-static const USBDescriptor vcom_device_descriptor = {
- sizeof vcom_device_descriptor_data,
- vcom_device_descriptor_data
-};
-
-/* Configuration Descriptor tree for a CDC.*/
-static const uint8_t vcom_configuration_descriptor_data[67] = {
- /* Configuration Descriptor.*/
- USB_DESC_CONFIGURATION(67, /* wTotalLength. */
- 0x02, /* bNumInterfaces. */
- 0x01, /* bConfigurationValue. */
- 0, /* iConfiguration. */
- 0xC0, /* bmAttributes (self powered). */
- 50), /* bMaxPower (100mA). */
- /* Interface Descriptor.*/
- USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */
- 0x00, /* bAlternateSetting. */
- 0x01, /* bNumEndpoints. */
- 0x02, /* bInterfaceClass (Communications
- Interface Class, CDC section
- 4.2). */
- 0x02, /* bInterfaceSubClass (Abstract
- Control Model, CDC section 4.3). */
- 0x01, /* bInterfaceProtocol (AT commands,
- CDC section 4.4). */
- 0), /* iInterface. */
- /* Header Functional Descriptor (CDC section 5.2.3).*/
- USB_DESC_BYTE (5), /* bLength. */
- USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */
- USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header
- Functional Descriptor. */
- USB_DESC_BCD (0x0110), /* bcdCDC. */
- /* Call Management Functional Descriptor. */
- USB_DESC_BYTE (5), /* bFunctionLength. */
- USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */
- USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management
- Functional Descriptor). */
- USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */
- USB_DESC_BYTE (0x01), /* bDataInterface. */
- /* ACM Functional Descriptor.*/
- USB_DESC_BYTE (4), /* bFunctionLength. */
- USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */
- USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract
- Control Management Descriptor). */
- USB_DESC_BYTE (0x02), /* bmCapabilities. */
- /* Union Functional Descriptor.*/
- USB_DESC_BYTE (5), /* bFunctionLength. */
- USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */
- USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union
- Functional Descriptor). */
- USB_DESC_BYTE (0x00), /* bMasterInterface (Communication
- Class Interface). */
- USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class
- Interface). */
- /* Endpoint 2 Descriptor.*/
- USB_DESC_ENDPOINT (USBD1_INTERRUPT_REQUEST_EP|0x80,
- 0x03, /* bmAttributes (Interrupt). */
- 0x0008, /* wMaxPacketSize. */
- 0xFF), /* bInterval. */
- /* Interface Descriptor.*/
- USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */
- 0x00, /* bAlternateSetting. */
- 0x02, /* bNumEndpoints. */
- 0x0A, /* bInterfaceClass (Data Class
- Interface, CDC section 4.5). */
- 0x00, /* bInterfaceSubClass (CDC section
- 4.6). */
- 0x00, /* bInterfaceProtocol (CDC section
- 4.7). */
- 0x00), /* iInterface. */
- /* Endpoint 3 Descriptor.*/
- USB_DESC_ENDPOINT (USBD1_DATA_AVAILABLE_EP, /* bEndpointAddress.*/
- 0x02, /* bmAttributes (Bulk). */
- 0x0040, /* wMaxPacketSize. */
- 0x00), /* bInterval. */
- /* Endpoint 1 Descriptor.*/
- USB_DESC_ENDPOINT (USBD1_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/
- 0x02, /* bmAttributes (Bulk). */
- 0x0040, /* wMaxPacketSize. */
- 0x00) /* bInterval. */
-};
-
-/*
- * Configuration Descriptor wrapper.
- */
-static const USBDescriptor vcom_configuration_descriptor = {
- sizeof vcom_configuration_descriptor_data,
- vcom_configuration_descriptor_data
-};
-
-/*
- * U.S. English language identifier.
- */
-static const uint8_t vcom_string0[] = {
- USB_DESC_BYTE(4), /* bLength. */
- USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */
- USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */
-};
-
-/*
- * Vendor string.
- */
-static const uint8_t vcom_string1[] = {
- USB_DESC_BYTE(38), /* bLength. */
- USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */
- 'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0,
- 'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0,
- 'c', 0, 's', 0
-};
-
-/*
- * Device Description string.
- */
-static const uint8_t vcom_string2[] = {
- USB_DESC_BYTE(56), /* bLength. */
- USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */
- 'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0,
- 'R', 0, 'T', 0, ' ', 0, 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0,
- 'a', 0, 'l', 0, ' ', 0, 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0,
- 'o', 0, 'r', 0, 't', 0
-};
-
-/*
- * Serial Number string.
- */
-static const uint8_t vcom_string3[] = {
- USB_DESC_BYTE(8), /* bLength. */
- USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */
- '0' + CH_KERNEL_MAJOR, 0,
- '0' + CH_KERNEL_MINOR, 0,
- '0' + CH_KERNEL_PATCH, 0
-};
-
-/*
- * Strings wrappers array.
- */
-static const USBDescriptor vcom_strings[] = {
- {sizeof vcom_string0, vcom_string0},
- {sizeof vcom_string1, vcom_string1},
- {sizeof vcom_string2, vcom_string2},
- {sizeof vcom_string3, vcom_string3}
-};
-
-/*
- * Handles the GET_DESCRIPTOR callback. All required descriptors must be
- * handled here.
- */
-static const USBDescriptor *get_descriptor(USBDriver *usbp,
- uint8_t dtype,
- uint8_t dindex,
- uint16_t lang) {
-
- (void)usbp;
- (void)lang;
- switch (dtype) {
- case USB_DESCRIPTOR_DEVICE:
- return &vcom_device_descriptor;
- case USB_DESCRIPTOR_CONFIGURATION:
- return &vcom_configuration_descriptor;
- case USB_DESCRIPTOR_STRING:
- if (dindex < 4)
- return &vcom_strings[dindex];
- }
- return NULL;
-}
-
-/**
- * @brief IN EP1 state.
- */
-static USBInEndpointState ep1instate;
-
-/**
- * @brief OUT EP1 state.
- */
-static USBOutEndpointState ep1outstate;
-
-/**
- * @brief EP1 initialization structure (both IN and OUT).
- */
-static const USBEndpointConfig ep1config = {
- USB_EP_MODE_TYPE_BULK,
- NULL,
- sduDataTransmitted,
- sduDataReceived,
- 0x0040,
- 0x0040,
- &ep1instate,
- &ep1outstate,
- 1,
- NULL
-};
-
-/**
- * @brief IN EP2 state.
- */
-static USBInEndpointState ep2instate;
-
-/**
- * @brief EP2 initialization structure (IN only).
- */
-static const USBEndpointConfig ep2config = {
- USB_EP_MODE_TYPE_INTR,
- NULL,
- sduInterruptTransmitted,
- NULL,
- 0x0010,
- 0x0000,
- &ep2instate,
- NULL,
- 1,
- NULL
-};
-
-/*
- * Handles the USB driver global events.
- */
-static void usb_event(USBDriver *usbp, usbevent_t event) {
-
- switch (event) {
- case USB_EVENT_RESET:
- return;
- case USB_EVENT_ADDRESS:
- return;
- case USB_EVENT_CONFIGURED:
- chSysLockFromIsr();
-
- /* Enables the endpoints specified into the configuration.
- Note, this callback is invoked from an ISR so I-Class functions
- must be used.*/
- usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config);
- usbInitEndpointI(usbp, USBD1_INTERRUPT_REQUEST_EP, &ep2config);
-
- /* Resetting the state of the CDC subsystem.*/
- sduConfigureHookI(&SDU1);
-
- chSysUnlockFromIsr();
- return;
- case USB_EVENT_SUSPEND:
- return;
- case USB_EVENT_WAKEUP:
- return;
- case USB_EVENT_STALLED:
- return;
- }
- return;
-}
-
-/*
- * USB driver configuration.
- */
-static const USBConfig usbcfg = {
- usb_event,
- get_descriptor,
- sduRequestsHook,
- NULL
-};
-
-/*
- * Serial over USB driver configuration.
- */
-static const SerialUSBConfig serusbcfg = {
- &USBD1,
- USBD1_DATA_REQUEST_EP,
- USBD1_DATA_AVAILABLE_EP,
- USBD1_INTERRUPT_REQUEST_EP
-};
+/* Virtual serial port over USB.*/
+SerialUSBDriver SDU1;
/*===========================================================================*/
/* Command line related. */
/*===========================================================================*/
-#define SHELL_WA_SIZE THD_WA_SIZE(2048)
-#define TEST_WA_SIZE THD_WA_SIZE(256)
+#define SHELL_WA_SIZE THD_WORKING_AREA_SIZE(2048)
+#define TEST_WA_SIZE THD_WORKING_AREA_SIZE(256)
static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) {
size_t n, size;
@@ -350,34 +51,34 @@ static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) {
}
static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) {
- static const char *states[] = {THD_STATE_NAMES};
- Thread *tp;
+ static const char *states[] = {CH_STATE_NAMES};
+ thread_t *tp;
(void)argv;
if (argc > 0) {
chprintf(chp, "Usage: threads\r\n");
return;
}
- chprintf(chp, " addr stack prio refs state time\r\n");
+ chprintf(chp, " addr stack prio refs state\r\n");
tp = chRegFirstThread();
do {
- chprintf(chp, "%.8lx %.8lx %4lu %4lu %9s %lu\r\n",
+ chprintf(chp, "%08lx %08lx %4lu %4lu %9s\r\n",
(uint32_t)tp, (uint32_t)tp->p_ctx.r13,
(uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1),
- states[tp->p_state], (uint32_t)tp->p_time);
+ states[tp->p_state]);
tp = chRegNextThread(tp);
} while (tp != NULL);
}
static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) {
- Thread *tp;
+ thread_t *tp;
(void)argv;
if (argc > 0) {
chprintf(chp, "Usage: test\r\n");
return;
}
- tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriority(),
+ tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriorityX(),
TestThread, chp);
if (tp == NULL) {
chprintf(chp, "out of memory\r\n");
@@ -437,8 +138,8 @@ static const ShellConfig shell_cfg1 = {
/*
* Red LED blinker thread, times are in milliseconds.
*/
-static WORKING_AREA(waThread1, 128);
-static msg_t Thread1(void *arg) {
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
(void)arg;
chRegSetThreadName("blinker");
@@ -455,7 +156,7 @@ static msg_t Thread1(void *arg) {
* Application entry point.
*/
int main(void) {
- Thread *shelltp = NULL;
+ thread_t *shelltp = NULL;
/*
* System initializations.
@@ -500,7 +201,7 @@ int main(void) {
while (TRUE) {
if (!shelltp && (SDU1.config->usbp->state == USB_ACTIVE))
shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO);
- else if (chThdTerminated(shelltp)) {
+ else if (chThdTerminatedX(shelltp)) {
chThdRelease(shelltp); /* Recovers memory of the previous shell. */
shelltp = NULL; /* Triggers spawning of a new shell. */
}
diff --git a/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/mcuconf.h b/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/mcuconf.h
index ba73e46b0..eac47c57b 100644
--- a/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/mcuconf.h
+++ b/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/mcuconf.h
@@ -1,5 +1,5 @@
/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+ ChibiOS - Copyright (C) 2006-2014 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -102,12 +102,12 @@
*/
#define STM32_I2C_USE_I2C1 FALSE
#define STM32_I2C_USE_I2C2 FALSE
+#define STM32_I2C_BUSY_TIMEOUT 50
#define STM32_I2C_I2C1_IRQ_PRIORITY 5
#define STM32_I2C_I2C2_IRQ_PRIORITY 5
#define STM32_I2C_I2C1_DMA_PRIORITY 3
#define STM32_I2C_I2C2_DMA_PRIORITY 3
-#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt()
-#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt()
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
/*
* ICU driver system settings.
@@ -173,7 +173,13 @@
#define STM32_SPI_SPI1_IRQ_PRIORITY 10
#define STM32_SPI_SPI2_IRQ_PRIORITY 10
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
-#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt()
+#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY 8
+#define STM32_ST_USE_TIMER 2
/*
* UART driver system settings.
@@ -187,7 +193,7 @@
#define STM32_UART_USART1_DMA_PRIORITY 0
#define STM32_UART_USART2_DMA_PRIORITY 0
#define STM32_UART_USART3_DMA_PRIORITY 0
-#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt()
+#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
/*
* USB driver system settings.
diff --git a/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/usbcfg.c b/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/usbcfg.c
new file mode 100644
index 000000000..4ac09b7e8
--- /dev/null
+++ b/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/usbcfg.c
@@ -0,0 +1,314 @@
+/*
+ ChibiOS - Copyright (C) 2006-2014 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+
+/*
+ * Endpoints to be used for USBD1.
+ */
+#define USBD1_DATA_REQUEST_EP 1
+#define USBD1_DATA_AVAILABLE_EP 1
+#define USBD1_INTERRUPT_REQUEST_EP 2
+
+/*
+ * USB Device Descriptor.
+ */
+static const uint8_t vcom_device_descriptor_data[18] = {
+ USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */
+ 0x02, /* bDeviceClass (CDC). */
+ 0x00, /* bDeviceSubClass. */
+ 0x00, /* bDeviceProtocol. */
+ 0x40, /* bMaxPacketSize. */
+ 0x0483, /* idVendor (ST). */
+ 0x5740, /* idProduct. */
+ 0x0200, /* bcdDevice. */
+ 1, /* iManufacturer. */
+ 2, /* iProduct. */
+ 3, /* iSerialNumber. */
+ 1) /* bNumConfigurations. */
+};
+
+/*
+ * Device Descriptor wrapper.
+ */
+static const USBDescriptor vcom_device_descriptor = {
+ sizeof vcom_device_descriptor_data,
+ vcom_device_descriptor_data
+};
+
+/* Configuration Descriptor tree for a CDC.*/
+static const uint8_t vcom_configuration_descriptor_data[67] = {
+ /* Configuration Descriptor.*/
+ USB_DESC_CONFIGURATION(67, /* wTotalLength. */
+ 0x02, /* bNumInterfaces. */
+ 0x01, /* bConfigurationValue. */
+ 0, /* iConfiguration. */
+ 0xC0, /* bmAttributes (self powered). */
+ 50), /* bMaxPower (100mA). */
+ /* Interface Descriptor.*/
+ USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */
+ 0x00, /* bAlternateSetting. */
+ 0x01, /* bNumEndpoints. */
+ 0x02, /* bInterfaceClass (Communications
+ Interface Class, CDC section
+ 4.2). */
+ 0x02, /* bInterfaceSubClass (Abstract
+ Control Model, CDC section 4.3). */
+ 0x01, /* bInterfaceProtocol (AT commands,
+ CDC section 4.4). */
+ 0), /* iInterface. */
+ /* Header Functional Descriptor (CDC section 5.2.3).*/
+ USB_DESC_BYTE (5), /* bLength. */
+ USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */
+ USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header
+ Functional Descriptor. */
+ USB_DESC_BCD (0x0110), /* bcdCDC. */
+ /* Call Management Functional Descriptor. */
+ USB_DESC_BYTE (5), /* bFunctionLength. */
+ USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */
+ USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management
+ Functional Descriptor). */
+ USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */
+ USB_DESC_BYTE (0x01), /* bDataInterface. */
+ /* ACM Functional Descriptor.*/
+ USB_DESC_BYTE (4), /* bFunctionLength. */
+ USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */
+ USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract
+ Control Management Descriptor). */
+ USB_DESC_BYTE (0x02), /* bmCapabilities. */
+ /* Union Functional Descriptor.*/
+ USB_DESC_BYTE (5), /* bFunctionLength. */
+ USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */
+ USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union
+ Functional Descriptor). */
+ USB_DESC_BYTE (0x00), /* bMasterInterface (Communication
+ Class Interface). */
+ USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class
+ Interface). */
+ /* Endpoint 2 Descriptor.*/
+ USB_DESC_ENDPOINT (USBD1_INTERRUPT_REQUEST_EP|0x80,
+ 0x03, /* bmAttributes (Interrupt). */
+ 0x0008, /* wMaxPacketSize. */
+ 0xFF), /* bInterval. */
+ /* Interface Descriptor.*/
+ USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */
+ 0x00, /* bAlternateSetting. */
+ 0x02, /* bNumEndpoints. */
+ 0x0A, /* bInterfaceClass (Data Class
+ Interface, CDC section 4.5). */
+ 0x00, /* bInterfaceSubClass (CDC section
+ 4.6). */
+ 0x00, /* bInterfaceProtocol (CDC section
+ 4.7). */
+ 0x00), /* iInterface. */
+ /* Endpoint 3 Descriptor.*/
+ USB_DESC_ENDPOINT (USBD1_DATA_AVAILABLE_EP, /* bEndpointAddress.*/
+ 0x02, /* bmAttributes (Bulk). */
+ 0x0040, /* wMaxPacketSize. */
+ 0x00), /* bInterval. */
+ /* Endpoint 1 Descriptor.*/
+ USB_DESC_ENDPOINT (USBD1_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/
+ 0x02, /* bmAttributes (Bulk). */
+ 0x0040, /* wMaxPacketSize. */
+ 0x00) /* bInterval. */
+};
+
+/*
+ * Configuration Descriptor wrapper.
+ */
+static const USBDescriptor vcom_configuration_descriptor = {
+ sizeof vcom_configuration_descriptor_data,
+ vcom_configuration_descriptor_data
+};
+
+/*
+ * U.S. English language identifier.
+ */
+static const uint8_t vcom_string0[] = {
+ USB_DESC_BYTE(4), /* bLength. */
+ USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */
+ USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */
+};
+
+/*
+ * Vendor string.
+ */
+static const uint8_t vcom_string1[] = {
+ USB_DESC_BYTE(38), /* bLength. */
+ USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */
+ 'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0,
+ 'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0,
+ 'c', 0, 's', 0
+};
+
+/*
+ * Device Description string.
+ */
+static const uint8_t vcom_string2[] = {
+ USB_DESC_BYTE(56), /* bLength. */
+ USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */
+ 'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0,
+ 'R', 0, 'T', 0, ' ', 0, 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0,
+ 'a', 0, 'l', 0, ' ', 0, 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0,
+ 'o', 0, 'r', 0, 't', 0
+};
+
+/*
+ * Serial Number string.
+ */
+static const uint8_t vcom_string3[] = {
+ USB_DESC_BYTE(8), /* bLength. */
+ USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */
+ '0' + CH_KERNEL_MAJOR, 0,
+ '0' + CH_KERNEL_MINOR, 0,
+ '0' + CH_KERNEL_PATCH, 0
+};
+
+/*
+ * Strings wrappers array.
+ */
+static const USBDescriptor vcom_strings[] = {
+ {sizeof vcom_string0, vcom_string0},
+ {sizeof vcom_string1, vcom_string1},
+ {sizeof vcom_string2, vcom_string2},
+ {sizeof vcom_string3, vcom_string3}
+};
+
+/*
+ * Handles the GET_DESCRIPTOR callback. All required descriptors must be
+ * handled here.
+ */
+static const USBDescriptor *get_descriptor(USBDriver *usbp,
+ uint8_t dtype,
+ uint8_t dindex,
+ uint16_t lang) {
+
+ (void)usbp;
+ (void)lang;
+ switch (dtype) {
+ case USB_DESCRIPTOR_DEVICE:
+ return &vcom_device_descriptor;
+ case USB_DESCRIPTOR_CONFIGURATION:
+ return &vcom_configuration_descriptor;
+ case USB_DESCRIPTOR_STRING:
+ if (dindex < 4)
+ return &vcom_strings[dindex];
+ }
+ return NULL;
+}
+
+/**
+ * @brief IN EP1 state.
+ */
+static USBInEndpointState ep1instate;
+
+/**
+ * @brief OUT EP1 state.
+ */
+static USBOutEndpointState ep1outstate;
+
+/**
+ * @brief EP1 initialization structure (both IN and OUT).
+ */
+static const USBEndpointConfig ep1config = {
+ USB_EP_MODE_TYPE_BULK,
+ NULL,
+ sduDataTransmitted,
+ sduDataReceived,
+ 0x0040,
+ 0x0040,
+ &ep1instate,
+ &ep1outstate,
+ 2,
+ NULL
+};
+
+/**
+ * @brief IN EP2 state.
+ */
+static USBInEndpointState ep2instate;
+
+/**
+ * @brief EP2 initialization structure (IN only).
+ */
+static const USBEndpointConfig ep2config = {
+ USB_EP_MODE_TYPE_INTR,
+ NULL,
+ sduInterruptTransmitted,
+ NULL,
+ 0x0010,
+ 0x0000,
+ &ep2instate,
+ NULL,
+ 1,
+ NULL
+};
+
+/*
+ * Handles the USB driver global events.
+ */
+static void usb_event(USBDriver *usbp, usbevent_t event) {
+ extern SerialUSBDriver SDU1;
+
+ switch (event) {
+ case USB_EVENT_RESET:
+ return;
+ case USB_EVENT_ADDRESS:
+ return;
+ case USB_EVENT_CONFIGURED:
+ chSysLockFromISR();
+
+ /* Enables the endpoints specified into the configuration.
+ Note, this callback is invoked from an ISR so I-Class functions
+ must be used.*/
+ usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config);
+ usbInitEndpointI(usbp, USBD1_INTERRUPT_REQUEST_EP, &ep2config);
+
+ /* Resetting the state of the CDC subsystem.*/
+ sduConfigureHookI(&SDU1);
+
+ chSysUnlockFromISR();
+ return;
+ case USB_EVENT_SUSPEND:
+ return;
+ case USB_EVENT_WAKEUP:
+ return;
+ case USB_EVENT_STALLED:
+ return;
+ }
+ return;
+}
+
+/*
+ * USB driver configuration.
+ */
+const USBConfig usbcfg = {
+ usb_event,
+ get_descriptor,
+ sduRequestsHook,
+ NULL
+};
+
+/*
+ * Serial over USB driver configuration.
+ */
+const SerialUSBConfig serusbcfg = {
+ &USBD1,
+ USBD1_DATA_REQUEST_EP,
+ USBD1_DATA_AVAILABLE_EP,
+ USBD1_INTERRUPT_REQUEST_EP
+};
diff --git a/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/usbcfg.h b/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/usbcfg.h
new file mode 100644
index 000000000..3a20e0d19
--- /dev/null
+++ b/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/usbcfg.h
@@ -0,0 +1,25 @@
+/*
+ ChibiOS - Copyright (C) 2006-2014 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#ifndef _USBCFG_H_
+#define _USBCFG_H_
+
+extern const USBConfig usbcfg;
+extern SerialUSBConfig serusbcfg;
+
+#endif /* _USBCFG_H_ */
+
+/** @} */
diff --git a/testhal/STM32/STM32F1xx/ADC/mcuconf.h b/testhal/STM32/STM32F1xx/ADC/mcuconf.h
index 8ca927071..5900a8ee9 100644
--- a/testhal/STM32/STM32F1xx/ADC/mcuconf.h
+++ b/testhal/STM32/STM32F1xx/ADC/mcuconf.h
@@ -175,6 +175,12 @@
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY 8
+#define STM32_ST_USE_TIMER 2
+
/*
* UART driver system settings.
*/
diff --git a/testhal/STM32/STM32F1xx/CAN/mcuconf.h b/testhal/STM32/STM32F1xx/CAN/mcuconf.h
index 39cf40780..473bed11f 100644
--- a/testhal/STM32/STM32F1xx/CAN/mcuconf.h
+++ b/testhal/STM32/STM32F1xx/CAN/mcuconf.h
@@ -175,6 +175,12 @@
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY 8
+#define STM32_ST_USE_TIMER 2
+
/*
* UART driver system settings.
*/
diff --git a/testhal/STM32/STM32F1xx/EXT/mcuconf.h b/testhal/STM32/STM32F1xx/EXT/mcuconf.h
index b261fb50d..052440c0a 100644
--- a/testhal/STM32/STM32F1xx/EXT/mcuconf.h
+++ b/testhal/STM32/STM32F1xx/EXT/mcuconf.h
@@ -175,6 +175,12 @@
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY 8
+#define STM32_ST_USE_TIMER 2
+
/*
* UART driver system settings.
*/
diff --git a/testhal/STM32/STM32F1xx/IRQ_STORM/mcuconf.h b/testhal/STM32/STM32F1xx/IRQ_STORM/mcuconf.h
index ae5c645da..05faa81f6 100644
--- a/testhal/STM32/STM32F1xx/IRQ_STORM/mcuconf.h
+++ b/testhal/STM32/STM32F1xx/IRQ_STORM/mcuconf.h
@@ -175,6 +175,12 @@
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY 8
+#define STM32_ST_USE_TIMER 2
+
/*
* UART driver system settings.
*/
diff --git a/testhal/STM32/STM32F1xx/PWM-ICU/mcuconf.h b/testhal/STM32/STM32F1xx/PWM-ICU/mcuconf.h
index f0963d15c..85d13b68a 100644
--- a/testhal/STM32/STM32F1xx/PWM-ICU/mcuconf.h
+++ b/testhal/STM32/STM32F1xx/PWM-ICU/mcuconf.h
@@ -175,6 +175,12 @@
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY 8
+#define STM32_ST_USE_TIMER 2
+
/*
* UART driver system settings.
*/
diff --git a/testhal/STM32/STM32F1xx/SPI/mcuconf.h b/testhal/STM32/STM32F1xx/SPI/mcuconf.h
index 5de132afa..acab02b29 100644
--- a/testhal/STM32/STM32F1xx/SPI/mcuconf.h
+++ b/testhal/STM32/STM32F1xx/SPI/mcuconf.h
@@ -175,6 +175,12 @@
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY 8
+#define STM32_ST_USE_TIMER 2
+
/*
* UART driver system settings.
*/
diff --git a/testhal/STM32/STM32F1xx/UART/mcuconf.h b/testhal/STM32/STM32F1xx/UART/mcuconf.h
index 10c0684ee..92d3380f6 100644
--- a/testhal/STM32/STM32F1xx/UART/mcuconf.h
+++ b/testhal/STM32/STM32F1xx/UART/mcuconf.h
@@ -175,6 +175,12 @@
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY 8
+#define STM32_ST_USE_TIMER 2
+
/*
* UART driver system settings.
*/
diff --git a/testhal/STM32/STM32F1xx/USB_CDC/mcuconf.h b/testhal/STM32/STM32F1xx/USB_CDC/mcuconf.h
index 3d82f8d46..66d85c8b1 100644
--- a/testhal/STM32/STM32F1xx/USB_CDC/mcuconf.h
+++ b/testhal/STM32/STM32F1xx/USB_CDC/mcuconf.h
@@ -175,6 +175,12 @@
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY 8
+#define STM32_ST_USE_TIMER 2
+
/*
* UART driver system settings.
*/
diff --git a/testhal/STM32/STM32F1xx/USB_CDC_F107/mcuconf.h b/testhal/STM32/STM32F1xx/USB_CDC_F107/mcuconf.h
index 9175f0851..0f62e848b 100644
--- a/testhal/STM32/STM32F1xx/USB_CDC_F107/mcuconf.h
+++ b/testhal/STM32/STM32F1xx/USB_CDC_F107/mcuconf.h
@@ -182,6 +182,12 @@
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY 8
+#define STM32_ST_USE_TIMER 2
+
/*
* UART driver system settings.
*/