From e56574886ed6a3980212b3a878b85af9bf0adbde Mon Sep 17 00:00:00 2001
From: Giovanni Di Sirio <gdisirio@gmail.com>
Date: Tue, 10 Oct 2017 13:11:46 +0000
Subject: [PATCH] Added multi-target lwIP demo.

git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@10807 35acf78f-673a-0410-8e92-d51de3d6d3f4
---
 .../.cproject                                 |   47 +-
 .../.project                                  |    7 +-
 demos/STM32/RT-STM32-LWIP-FATFS-USB/Makefile  |   18 +
 .../Makefile-stm32f746_discovery}             |    8 +-
 .../cfg-stm32f746_discovery}/chconf.h         |    0
 .../cfg-stm32f746_discovery}/halconf.h        |    0
 .../cfg-stm32f746_discovery}/mcuconf.h        |    0
 .../cfg/ffconf.h                              |    0
 .../cfg/httpd_opts.h                          |    0
 .../cfg/lwipopts.h                            |    0
 ... ELF file)(OpenOCD, Flash and Run).launch} |  104 +-
 ...elect ELF file)(OpenOCD, Just Run).launch} |   14 +-
 .../main.c                                    |    5 -
 .../readme.txt                                |    0
 .../src/usbcfg.c                              |    0
 .../src/usbcfg.h                              |    0
 .../cfg/lwipopts_old.h                        | 2127 -----------------
 17 files changed, 126 insertions(+), 2204 deletions(-)
 rename demos/STM32/{RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB => RT-STM32-LWIP-FATFS-USB}/.cproject (52%)
 rename demos/STM32/{RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB => RT-STM32-LWIP-FATFS-USB}/.project (90%)
 create mode 100644 demos/STM32/RT-STM32-LWIP-FATFS-USB/Makefile
 rename demos/STM32/{RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/Makefile => RT-STM32-LWIP-FATFS-USB/Makefile-stm32f746_discovery} (94%)
 rename demos/STM32/{RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/cfg => RT-STM32-LWIP-FATFS-USB/cfg-stm32f746_discovery}/chconf.h (100%)
 rename demos/STM32/{RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/cfg => RT-STM32-LWIP-FATFS-USB/cfg-stm32f746_discovery}/halconf.h (100%)
 rename demos/STM32/{RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/cfg => RT-STM32-LWIP-FATFS-USB/cfg-stm32f746_discovery}/mcuconf.h (100%)
 rename demos/STM32/{RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB => RT-STM32-LWIP-FATFS-USB}/cfg/ffconf.h (100%)
 rename demos/STM32/{RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB => RT-STM32-LWIP-FATFS-USB}/cfg/httpd_opts.h (100%)
 rename demos/STM32/{RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB => RT-STM32-LWIP-FATFS-USB}/cfg/lwipopts.h (100%)
 rename demos/STM32/{RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/debug/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB (OpenOCD, Flash and Run).launch => RT-STM32-LWIP-FATFS-USB/debug/RT-STM32-LWIP-FATFS-USB (Select ELF file)(OpenOCD, Flash and Run).launch} (87%)
 rename demos/STM32/{RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/debug/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB (OpenOCD, Just Run).launch => RT-STM32-LWIP-FATFS-USB/debug/RT-STM32-LWIP-FATFS-USB (Select ELF file)(OpenOCD, Just Run).launch} (89%)
 rename demos/STM32/{RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB => RT-STM32-LWIP-FATFS-USB}/main.c (93%)
 rename demos/STM32/{RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB => RT-STM32-LWIP-FATFS-USB}/readme.txt (100%)
 rename demos/STM32/{RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB => RT-STM32-LWIP-FATFS-USB}/src/usbcfg.c (100%)
 mode change 100755 => 100644
 rename demos/STM32/{RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB => RT-STM32-LWIP-FATFS-USB}/src/usbcfg.h (100%)
 mode change 100755 => 100644
 delete mode 100644 demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/cfg/lwipopts_old.h

diff --git a/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/.cproject b/demos/STM32/RT-STM32-LWIP-FATFS-USB/.cproject
similarity index 52%
rename from demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/.cproject
rename to demos/STM32/RT-STM32-LWIP-FATFS-USB/.cproject
index 9d83d5079..6fbba7197 100644
--- a/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/.cproject
+++ b/demos/STM32/RT-STM32-LWIP-FATFS-USB/.cproject
@@ -19,7 +19,7 @@
 					<folderInfo id="0.1570569554." name="/" resourcePath="">
 						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.2051275125" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
 							<targetPlatform binaryParser="org.eclipse.cdt.core.ELF" id="org.eclipse.cdt.build.core.prefbase.toolchain.2051275125.1235631892" name=""/>
-							<builder id="org.eclipse.cdt.build.core.settings.default.builder.681215945" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<builder arguments="Makefile-stm32f746_discovery" command="make" id="org.eclipse.cdt.build.core.settings.default.builder.681215945" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
 							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1913618182" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
 							<tool id="org.eclipse.cdt.build.core.settings.holder.1359024970" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
 								<option id="org.eclipse.cdt.build.core.settings.holder.incpaths.648690541" name="Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.incpaths"/>
@@ -42,9 +42,50 @@
 			</storageModule>
 			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
 		</cconfiguration>
+		<cconfiguration id="0.1570569554.1629784558">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.1570569554.1629784558" moduleId="org.eclipse.cdt.core.settings" name="Build for STM32F746-Discovery">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.1570569554.1629784558" name="Build for STM32F746-Discovery" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.1570569554.1629784558." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1578189045" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform binaryParser="org.eclipse.cdt.core.ELF" id="org.eclipse.cdt.build.core.prefbase.toolchain.1578189045.328762513" name=""/>
+							<builder id="org.eclipse.cdt.build.core.settings.default.builder.339968776" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1142929379" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1147455862" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<option id="org.eclipse.cdt.build.core.settings.holder.incpaths.1688616224" name="Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.incpaths"/>
+								<option id="org.eclipse.cdt.build.core.settings.holder.undef.incpaths.1436087980" name="Undefined Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.undef.incpaths"/>
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1474099896" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1154996865" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<option id="org.eclipse.cdt.build.core.settings.holder.incpaths.1324760862" name="Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.incpaths"/>
+								<option id="org.eclipse.cdt.build.core.settings.holder.undef.incpaths.1580897186" name="Undefined Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.undef.incpaths"/>
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1011174191" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1777655289" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<option id="org.eclipse.cdt.build.core.settings.holder.incpaths.247218436" name="Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.incpaths"/>
+								<option id="org.eclipse.cdt.build.core.settings.holder.undef.incpaths.1400436566" name="Undefined Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.undef.incpaths"/>
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.667143723" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
 	</storageModule>
 	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
-		<project id="RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB.null.100047313" name="RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB"/>
+		<project id="RT-STM32-LWIP-FATFS-USB.null.100047313" name="RT-STM32-LWIP-FATFS-USB"/>
 	</storageModule>
 	<storageModule moduleId="scannerConfiguration">
 		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
@@ -55,7 +96,7 @@
 	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
 	<storageModule moduleId="refreshScope" versionNumber="2">
 		<configuration configurationName="Default">
-			<resource resourceType="PROJECT" workspacePath="/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB"/>
+			<resource resourceType="PROJECT" workspacePath="/RT-STM32-LWIP-FATFS-USB"/>
 		</configuration>
 	</storageModule>
 	<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
diff --git a/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/.project b/demos/STM32/RT-STM32-LWIP-FATFS-USB/.project
similarity index 90%
rename from demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/.project
rename to demos/STM32/RT-STM32-LWIP-FATFS-USB/.project
index 7a99f8c94..73a32bc8f 100644
--- a/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/.project
+++ b/demos/STM32/RT-STM32-LWIP-FATFS-USB/.project
@@ -1,6 +1,6 @@
 <?xml version="1.0" encoding="UTF-8"?>
 <projectDescription>
-	<name>RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB</name>
+	<name>RT-STM32-LWIP-FATFS-USB</name>
 	<comment></comment>
 	<projects>
 	</projects>
@@ -77,11 +77,6 @@
 		<nature>org.eclipse.cdt.core.ccnature</nature>
 	</natures>
 	<linkedResources>
-		<link>
-			<name>board</name>
-			<type>2</type>
-			<locationURI>CHIBIOS/os/hal/boards/ST_STM32F746G_DISCOVERY</locationURI>
-		</link>
 		<link>
 			<name>fatfs</name>
 			<type>2</type>
diff --git a/demos/STM32/RT-STM32-LWIP-FATFS-USB/Makefile b/demos/STM32/RT-STM32-LWIP-FATFS-USB/Makefile
new file mode 100644
index 000000000..76b09554b
--- /dev/null
+++ b/demos/STM32/RT-STM32-LWIP-FATFS-USB/Makefile
@@ -0,0 +1,18 @@
+##############################################################################
+# Multi-project makefile rules
+#
+
+all:
+	@echo
+	@echo === Building for STM32F746-Discovery ===============================
+	@make --no-print-directory -f Makefile-stm32f746_discovery all
+	@echo ====================================================================
+	@echo
+
+clean:
+	@echo
+	-@make --no-print-directory -f Makefile-stm32f746_discovery clean
+	@echo
+
+#
+##############################################################################
diff --git a/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/Makefile b/demos/STM32/RT-STM32-LWIP-FATFS-USB/Makefile-stm32f746_discovery
similarity index 94%
rename from demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/Makefile
rename to demos/STM32/RT-STM32-LWIP-FATFS-USB/Makefile-stm32f746_discovery
index 72bdc14b9..74e2e15bd 100644
--- a/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/Makefile
+++ b/demos/STM32/RT-STM32-LWIP-FATFS-USB/Makefile-stm32f746_discovery
@@ -89,9 +89,9 @@ endif
 
 # Define project name here
 PROJECT = ch
-CONFDIR  := ./cfg
-BUILDDIR := ./build
-DEPDIR   := ./.dep
+CONFDIR  := ./cfg-stm32f746_discovery
+BUILDDIR := ./build-stm32f746_discovery
+DEPDIR   := ./.dep-stm32f746_discovery
 
 # Imported source files and paths
 CHIBIOS = ../../..
@@ -164,7 +164,7 @@ INCDIR = $(CHIBIOS)/os/license \
          $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
          $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
          $(STREAMSINC) $(SHELLINC) $(LWINC) $(FATFSINC) \
-         $(CHIBIOS)/os/various $(CONFDIR) ./src
+         $(CHIBIOS)/os/various $(CONFDIR) ./cfg ./src
 
 #
 # Project, sources and paths
diff --git a/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/cfg/chconf.h b/demos/STM32/RT-STM32-LWIP-FATFS-USB/cfg-stm32f746_discovery/chconf.h
similarity index 100%
rename from demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/cfg/chconf.h
rename to demos/STM32/RT-STM32-LWIP-FATFS-USB/cfg-stm32f746_discovery/chconf.h
diff --git a/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/cfg/halconf.h b/demos/STM32/RT-STM32-LWIP-FATFS-USB/cfg-stm32f746_discovery/halconf.h
similarity index 100%
rename from demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/cfg/halconf.h
rename to demos/STM32/RT-STM32-LWIP-FATFS-USB/cfg-stm32f746_discovery/halconf.h
diff --git a/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/cfg/mcuconf.h b/demos/STM32/RT-STM32-LWIP-FATFS-USB/cfg-stm32f746_discovery/mcuconf.h
similarity index 100%
rename from demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/cfg/mcuconf.h
rename to demos/STM32/RT-STM32-LWIP-FATFS-USB/cfg-stm32f746_discovery/mcuconf.h
diff --git a/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/cfg/ffconf.h b/demos/STM32/RT-STM32-LWIP-FATFS-USB/cfg/ffconf.h
similarity index 100%
rename from demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/cfg/ffconf.h
rename to demos/STM32/RT-STM32-LWIP-FATFS-USB/cfg/ffconf.h
diff --git a/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/cfg/httpd_opts.h b/demos/STM32/RT-STM32-LWIP-FATFS-USB/cfg/httpd_opts.h
similarity index 100%
rename from demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/cfg/httpd_opts.h
rename to demos/STM32/RT-STM32-LWIP-FATFS-USB/cfg/httpd_opts.h
diff --git a/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/cfg/lwipopts.h b/demos/STM32/RT-STM32-LWIP-FATFS-USB/cfg/lwipopts.h
similarity index 100%
rename from demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/cfg/lwipopts.h
rename to demos/STM32/RT-STM32-LWIP-FATFS-USB/cfg/lwipopts.h
diff --git a/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/debug/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB (OpenOCD, Flash and Run).launch b/demos/STM32/RT-STM32-LWIP-FATFS-USB/debug/RT-STM32-LWIP-FATFS-USB (Select ELF file)(OpenOCD, Flash and Run).launch
similarity index 87%
rename from demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/debug/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB (OpenOCD, Flash and Run).launch
rename to demos/STM32/RT-STM32-LWIP-FATFS-USB/debug/RT-STM32-LWIP-FATFS-USB (Select ELF file)(OpenOCD, Flash and Run).launch
index d64a4e470..85e1e2c83 100644
--- a/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/debug/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB (OpenOCD, Flash and Run).launch	
+++ b/demos/STM32/RT-STM32-LWIP-FATFS-USB/debug/RT-STM32-LWIP-FATFS-USB (Select ELF file)(OpenOCD, Flash and Run).launch	
@@ -1,52 +1,52 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
-<stringAttribute key="bad_container_name" value="\RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB\debug"/>
-<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
-<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
-<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
-<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
-<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
-<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
-<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
-<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
-<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
-<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
-<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
-<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
-<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList&gt;&lt;content id=&quot;xPSR-(format)&quot; val=&quot;4&quot;/&gt;&lt;/contentList&gt;"/>
-<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#10;&lt;globalVariableList/&gt;&#10;"/>
-<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#10;&lt;memoryBlockExpressionList/&gt;&#10;"/>
-<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
-<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB"/>
-<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="false"/>
-<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value=""/>
-<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
-<listEntry value="/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB"/>
-</listAttribute>
-<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
-<listEntry value="4"/>
-</listAttribute>
-<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
-<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
-</listAttribute>
-</launchConfiguration>
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32-LWIP-FATFS-USB\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList&gt;&lt;content id=&quot;xPSR-(format)&quot; val=&quot;4&quot;/&gt;&lt;/contentList&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList&gt;&#13;&#10;&lt;memoryBlockExpressionItem&gt;&#13;&#10;&lt;expression text=&quot;0x40021004&quot;/&gt;&#13;&#10;&lt;/memoryBlockExpressionItem&gt;&#13;&#10;&lt;/memoryBlockExpressionList&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="${selected_resource_loc}"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32-LWIP-FATFS-USB"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="false"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value=""/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32-LWIP-FATFS-USB"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/debug/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB (OpenOCD, Just Run).launch b/demos/STM32/RT-STM32-LWIP-FATFS-USB/debug/RT-STM32-LWIP-FATFS-USB (Select ELF file)(OpenOCD, Just Run).launch
similarity index 89%
rename from demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/debug/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB (OpenOCD, Just Run).launch
rename to demos/STM32/RT-STM32-LWIP-FATFS-USB/debug/RT-STM32-LWIP-FATFS-USB (Select ELF file)(OpenOCD, Just Run).launch
index e84448446..315c220c5 100644
--- a/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/debug/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB (OpenOCD, Just Run).launch	
+++ b/demos/STM32/RT-STM32-LWIP-FATFS-USB/debug/RT-STM32-LWIP-FATFS-USB (Select ELF file)(OpenOCD, Just Run).launch	
@@ -1,6 +1,6 @@
 <?xml version="1.0" encoding="UTF-8" standalone="no"?>
 <launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
-<stringAttribute key="bad_container_name" value="\RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB\debug"/>
+<stringAttribute key="bad_container_name" value="\RT-STM32-LWIP-FATFS-USB\debug"/>
 <intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
 <booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
 <booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
@@ -35,13 +35,13 @@
 <stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
 <stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList&gt;&lt;content id=&quot;xPSR-(format)&quot; val=&quot;4&quot;/&gt;&lt;/contentList&gt;"/>
 <stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
-<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
-<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
-<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB"/>
-<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
-<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.1570569554"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList&gt;&#13;&#10;&lt;memoryBlockExpressionItem&gt;&#13;&#10;&lt;expression text=&quot;0x40021004&quot;/&gt;&#13;&#10;&lt;/memoryBlockExpressionItem&gt;&#13;&#10;&lt;/memoryBlockExpressionList&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="${selected_resource_loc}"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32-LWIP-FATFS-USB"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="false"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value=""/>
 <listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
-<listEntry value="/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB"/>
+<listEntry value="/RT-STM32-LWIP-FATFS-USB"/>
 </listAttribute>
 <listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
 <listEntry value="4"/>
diff --git a/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/main.c b/demos/STM32/RT-STM32-LWIP-FATFS-USB/main.c
similarity index 93%
rename from demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/main.c
rename to demos/STM32/RT-STM32-LWIP-FATFS-USB/main.c
index 60133fc4c..a914fa170 100644
--- a/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/main.c
+++ b/demos/STM32/RT-STM32-LWIP-FATFS-USB/main.c
@@ -173,11 +173,6 @@ static void cmd_tree(BaseSequentialStream *chp, int argc, char *argv[]) {
   chprintf(chp,
            "FS: %lu free clusters with %lu sectors (%lu bytes) per cluster\r\n",
            fre_clust, (uint32_t)fsp->csize, (uint32_t)fsp->csize * 512);
-  chprintf(chp,
-           "    %lu bytes (%lu MB) free of %lu MB\r\n",
-           fre_sect * 512,
-           fre_sect / 2 / 1024,
-           tot_sect / 2 / 1024);
   fbuff[0] = 0;
   scan_files(chp, (char *)fbuff);
 }
diff --git a/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/readme.txt b/demos/STM32/RT-STM32-LWIP-FATFS-USB/readme.txt
similarity index 100%
rename from demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/readme.txt
rename to demos/STM32/RT-STM32-LWIP-FATFS-USB/readme.txt
diff --git a/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/src/usbcfg.c b/demos/STM32/RT-STM32-LWIP-FATFS-USB/src/usbcfg.c
old mode 100755
new mode 100644
similarity index 100%
rename from demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/src/usbcfg.c
rename to demos/STM32/RT-STM32-LWIP-FATFS-USB/src/usbcfg.c
diff --git a/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/src/usbcfg.h b/demos/STM32/RT-STM32-LWIP-FATFS-USB/src/usbcfg.h
old mode 100755
new mode 100644
similarity index 100%
rename from demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/src/usbcfg.h
rename to demos/STM32/RT-STM32-LWIP-FATFS-USB/src/usbcfg.h
diff --git a/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/cfg/lwipopts_old.h b/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/cfg/lwipopts_old.h
deleted file mode 100644
index 5aa69b496..000000000
--- a/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/cfg/lwipopts_old.h
+++ /dev/null
@@ -1,2127 +0,0 @@
-/**
- * @file
- *
- * lwIP Options Configuration
- */
-
-/*
- * Copyright (c) 2001-2004 Swedish Institute of Computer Science.
- * All rights reserved. 
- * 
- * Redistribution and use in source and binary forms, with or without modification, 
- * are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- *    this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- *    this list of conditions and the following disclaimer in the documentation
- *    and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission. 
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED 
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 
- * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT 
- * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY 
- * OF SUCH DAMAGE.
- *
- * This file is part of the lwIP TCP/IP stack.
- * 
- * Author: Adam Dunkels <adam@sics.se>
- *
- */
-#ifndef __LWIPOPT_H__
-#define __LWIPOPT_H__
-
-
-/*
-   -----------------------------------------------
-   ---------- Platform specific locking ----------
-   -----------------------------------------------
-*/
-
-/**
- * SYS_LIGHTWEIGHT_PROT==1: if you want inter-task protection for certain
- * critical regions during buffer allocation, deallocation and memory
- * allocation and deallocation.
- */
-#ifndef SYS_LIGHTWEIGHT_PROT
-#define SYS_LIGHTWEIGHT_PROT            0
-#endif
-
-/**
- * NO_SYS==1: Provides VERY minimal functionality. Otherwise,
- * use lwIP facilities.
- */
-#ifndef NO_SYS
-#define NO_SYS                          0
-#endif
-
-/**
- * NO_SYS_NO_TIMERS==1: Drop support for sys_timeout when NO_SYS==1
- * Mainly for compatibility to old versions.
- */
-#ifndef NO_SYS_NO_TIMERS
-#define NO_SYS_NO_TIMERS                0
-#endif
-
-/**
- * MEMCPY: override this if you have a faster implementation at hand than the
- * one included in your C library
- */
-#ifndef MEMCPY
-#define MEMCPY(dst,src,len)             memcpy(dst,src,len)
-#endif
-
-/**
- * SMEMCPY: override this with care! Some compilers (e.g. gcc) can inline a
- * call to memcpy() if the length is known at compile time and is small.
- */
-#ifndef SMEMCPY
-#define SMEMCPY(dst,src,len)            memcpy(dst,src,len)
-#endif
-
-/*
-   ------------------------------------
-   ---------- Memory options ----------
-   ------------------------------------
-*/
-/**
- * MEM_LIBC_MALLOC==1: Use malloc/free/realloc provided by your C-library
- * instead of the lwip internal allocator. Can save code size if you
- * already use it.
- */
-#ifndef MEM_LIBC_MALLOC
-#define MEM_LIBC_MALLOC                 0
-#endif
-
-/**
-* MEMP_MEM_MALLOC==1: Use mem_malloc/mem_free instead of the lwip pool allocator.
-* Especially useful with MEM_LIBC_MALLOC but handle with care regarding execution
-* speed and usage from interrupts!
-*/
-#ifndef MEMP_MEM_MALLOC
-#define MEMP_MEM_MALLOC                 0
-#endif
-
-/**
- * MEM_ALIGNMENT: should be set to the alignment of the CPU
- *    4 byte alignment -> #define MEM_ALIGNMENT 4
- *    2 byte alignment -> #define MEM_ALIGNMENT 2
- */
-#ifndef MEM_ALIGNMENT
-#define MEM_ALIGNMENT                   4
-#endif
-
-/**
- * MEM_SIZE: the size of the heap memory. If the application will send
- * a lot of data that needs to be copied, this should be set high.
- */
-#ifndef MEM_SIZE
-#define MEM_SIZE                        1600
-#endif
-
-/**
- * MEMP_SEPARATE_POOLS: if defined to 1, each pool is placed in its own array.
- * This can be used to individually change the location of each pool.
- * Default is one big array for all pools
- */
-#ifndef MEMP_SEPARATE_POOLS
-#define MEMP_SEPARATE_POOLS             0
-#endif
-
-/**
- * MEMP_OVERFLOW_CHECK: memp overflow protection reserves a configurable
- * amount of bytes before and after each memp element in every pool and fills
- * it with a prominent default value.
- *    MEMP_OVERFLOW_CHECK == 0 no checking
- *    MEMP_OVERFLOW_CHECK == 1 checks each element when it is freed
- *    MEMP_OVERFLOW_CHECK >= 2 checks each element in every pool every time
- *      memp_malloc() or memp_free() is called (useful but slow!)
- */
-#ifndef MEMP_OVERFLOW_CHECK
-#define MEMP_OVERFLOW_CHECK             0
-#endif
-
-/**
- * MEMP_SANITY_CHECK==1: run a sanity check after each memp_free() to make
- * sure that there are no cycles in the linked lists.
- */
-#ifndef MEMP_SANITY_CHECK
-#define MEMP_SANITY_CHECK               0
-#endif
-
-/**
- * MEM_USE_POOLS==1: Use an alternative to malloc() by allocating from a set
- * of memory pools of various sizes. When mem_malloc is called, an element of
- * the smallest pool that can provide the length needed is returned.
- * To use this, MEMP_USE_CUSTOM_POOLS also has to be enabled.
- */
-#ifndef MEM_USE_POOLS
-#define MEM_USE_POOLS                   0
-#endif
-
-/**
- * MEM_USE_POOLS_TRY_BIGGER_POOL==1: if one malloc-pool is empty, try the next
- * bigger pool - WARNING: THIS MIGHT WASTE MEMORY but it can make a system more
- * reliable. */
-#ifndef MEM_USE_POOLS_TRY_BIGGER_POOL
-#define MEM_USE_POOLS_TRY_BIGGER_POOL   0
-#endif
-
-/**
- * MEMP_USE_CUSTOM_POOLS==1: whether to include a user file lwippools.h
- * that defines additional pools beyond the "standard" ones required
- * by lwIP. If you set this to 1, you must have lwippools.h in your
- * inlude path somewhere.
- */
-#ifndef MEMP_USE_CUSTOM_POOLS
-#define MEMP_USE_CUSTOM_POOLS           0
-#endif
-
-/**
- * Set this to 1 if you want to free PBUF_RAM pbufs (or call mem_free()) from
- * interrupt context (or another context that doesn't allow waiting for a
- * semaphore).
- * If set to 1, mem_malloc will be protected by a semaphore and SYS_ARCH_PROTECT,
- * while mem_free will only use SYS_ARCH_PROTECT. mem_malloc SYS_ARCH_UNPROTECTs
- * with each loop so that mem_free can run.
- *
- * ATTENTION: As you can see from the above description, this leads to dis-/
- * enabling interrupts often, which can be slow! Also, on low memory, mem_malloc
- * can need longer.
- *
- * If you don't want that, at least for NO_SYS=0, you can still use the following
- * functions to enqueue a deallocation call which then runs in the tcpip_thread
- * context:
- * - pbuf_free_callback(p);
- * - mem_free_callback(m);
- */
-#ifndef LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT
-#define LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT 0
-#endif
-
-/*
-   ------------------------------------------------
-   ---------- Internal Memory Pool Sizes ----------
-   ------------------------------------------------
-*/
-/**
- * MEMP_NUM_PBUF: the number of memp struct pbufs (used for PBUF_ROM and PBUF_REF).
- * If the application sends a lot of data out of ROM (or other static memory),
- * this should be set high.
- */
-#ifndef MEMP_NUM_PBUF
-#define MEMP_NUM_PBUF                   16
-#endif
-
-/**
- * MEMP_NUM_RAW_PCB: Number of raw connection PCBs
- * (requires the LWIP_RAW option)
- */
-#ifndef MEMP_NUM_RAW_PCB
-#define MEMP_NUM_RAW_PCB                4
-#endif
-
-/**
- * MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One
- * per active UDP "connection".
- * (requires the LWIP_UDP option)
- */
-#ifndef MEMP_NUM_UDP_PCB
-#define MEMP_NUM_UDP_PCB                4
-#endif
-
-/**
- * MEMP_NUM_TCP_PCB: the number of simulatenously active TCP connections.
- * (requires the LWIP_TCP option)
- */
-#ifndef MEMP_NUM_TCP_PCB
-#define MEMP_NUM_TCP_PCB                5
-#endif
-
-/**
- * MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP connections.
- * (requires the LWIP_TCP option)
- */
-#ifndef MEMP_NUM_TCP_PCB_LISTEN
-#define MEMP_NUM_TCP_PCB_LISTEN         8
-#endif
-
-/**
- * MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP segments.
- * (requires the LWIP_TCP option)
- */
-#ifndef MEMP_NUM_TCP_SEG
-#define MEMP_NUM_TCP_SEG                16
-#endif
-
-/**
- * MEMP_NUM_REASSDATA: the number of IP packets simultaneously queued for
- * reassembly (whole packets, not fragments!)
- */
-#ifndef MEMP_NUM_REASSDATA
-#define MEMP_NUM_REASSDATA              5
-#endif
-
-/**
- * MEMP_NUM_FRAG_PBUF: the number of IP fragments simultaneously sent
- * (fragments, not whole packets!).
- * This is only used with IP_FRAG_USES_STATIC_BUF==0 and
- * LWIP_NETIF_TX_SINGLE_PBUF==0 and only has to be > 1 with DMA-enabled MACs
- * where the packet is not yet sent when netif->output returns.
- */
-#ifndef MEMP_NUM_FRAG_PBUF
-#define MEMP_NUM_FRAG_PBUF              15
-#endif
-
-/**
- * MEMP_NUM_ARP_QUEUE: the number of simulateously queued outgoing
- * packets (pbufs) that are waiting for an ARP request (to resolve
- * their destination address) to finish.
- * (requires the ARP_QUEUEING option)
- */
-#ifndef MEMP_NUM_ARP_QUEUE
-#define MEMP_NUM_ARP_QUEUE              30
-#endif
-
-/**
- * MEMP_NUM_IGMP_GROUP: The number of multicast groups whose network interfaces
- * can be members et the same time (one per netif - allsystems group -, plus one
- * per netif membership).
- * (requires the LWIP_IGMP option)
- */
-#ifndef MEMP_NUM_IGMP_GROUP
-#define MEMP_NUM_IGMP_GROUP             8
-#endif
-
-/**
- * MEMP_NUM_SYS_TIMEOUT: the number of simulateously active timeouts.
- * (requires NO_SYS==0)
- * The default number of timeouts is calculated here for all enabled modules.
- * The formula expects settings to be either '0' or '1'.
- */
-#ifndef MEMP_NUM_SYS_TIMEOUT
-#define MEMP_NUM_SYS_TIMEOUT            (LWIP_TCP + IP_REASSEMBLY + LWIP_ARP + (2*LWIP_DHCP) + LWIP_AUTOIP + LWIP_IGMP + LWIP_DNS + PPP_SUPPORT)
-#endif
-
-/**
- * MEMP_NUM_NETBUF: the number of struct netbufs.
- * (only needed if you use the sequential API, like api_lib.c)
- */
-#ifndef MEMP_NUM_NETBUF
-#define MEMP_NUM_NETBUF                 2
-#endif
-
-/**
- * MEMP_NUM_NETCONN: the number of struct netconns.
- * (only needed if you use the sequential API, like api_lib.c)
- */
-#ifndef MEMP_NUM_NETCONN
-#define MEMP_NUM_NETCONN                4
-#endif
-
-/**
- * MEMP_NUM_TCPIP_MSG_API: the number of struct tcpip_msg, which are used
- * for callback/timeout API communication.
- * (only needed if you use tcpip.c)
- */
-#ifndef MEMP_NUM_TCPIP_MSG_API
-#define MEMP_NUM_TCPIP_MSG_API          8
-#endif
-
-/**
- * MEMP_NUM_TCPIP_MSG_INPKT: the number of struct tcpip_msg, which are used
- * for incoming packets.
- * (only needed if you use tcpip.c)
- */
-#ifndef MEMP_NUM_TCPIP_MSG_INPKT
-#define MEMP_NUM_TCPIP_MSG_INPKT        8
-#endif
-
-/**
- * MEMP_NUM_SNMP_NODE: the number of leafs in the SNMP tree.
- */
-#ifndef MEMP_NUM_SNMP_NODE
-#define MEMP_NUM_SNMP_NODE              50
-#endif
-
-/**
- * MEMP_NUM_SNMP_ROOTNODE: the number of branches in the SNMP tree.
- * Every branch has one leaf (MEMP_NUM_SNMP_NODE) at least!
- */
-#ifndef MEMP_NUM_SNMP_ROOTNODE
-#define MEMP_NUM_SNMP_ROOTNODE          30
-#endif
-
-/**
- * MEMP_NUM_SNMP_VARBIND: the number of concurrent requests (does not have to
- * be changed normally) - 2 of these are used per request (1 for input,
- * 1 for output)
- */
-#ifndef MEMP_NUM_SNMP_VARBIND
-#define MEMP_NUM_SNMP_VARBIND           2
-#endif
-
-/**
- * MEMP_NUM_SNMP_VALUE: the number of OID or values concurrently used
- * (does not have to be changed normally) - 3 of these are used per request
- * (1 for the value read and 2 for OIDs - input and output)
- */
-#ifndef MEMP_NUM_SNMP_VALUE
-#define MEMP_NUM_SNMP_VALUE             3
-#endif
-
-/**
- * MEMP_NUM_NETDB: the number of concurrently running lwip_addrinfo() calls
- * (before freeing the corresponding memory using lwip_freeaddrinfo()).
- */
-#ifndef MEMP_NUM_NETDB
-#define MEMP_NUM_NETDB                  1
-#endif
-
-/**
- * MEMP_NUM_LOCALHOSTLIST: the number of host entries in the local host list
- * if DNS_LOCAL_HOSTLIST_IS_DYNAMIC==1.
- */
-#ifndef MEMP_NUM_LOCALHOSTLIST
-#define MEMP_NUM_LOCALHOSTLIST          1
-#endif
-
-/**
- * MEMP_NUM_PPPOE_INTERFACES: the number of concurrently active PPPoE
- * interfaces (only used with PPPOE_SUPPORT==1)
- */
-#ifndef MEMP_NUM_PPPOE_INTERFACES
-#define MEMP_NUM_PPPOE_INTERFACES       1
-#endif
-
-/**
- * PBUF_POOL_SIZE: the number of buffers in the pbuf pool.
- */
-#ifndef PBUF_POOL_SIZE
-#define PBUF_POOL_SIZE                  16
-#endif
-
-/*
-   ---------------------------------
-   ---------- ARP options ----------
-   ---------------------------------
-*/
-/**
- * LWIP_ARP==1: Enable ARP functionality.
- */
-#ifndef LWIP_ARP
-#define LWIP_ARP                        1
-#endif
-
-/**
- * ARP_TABLE_SIZE: Number of active MAC-IP address pairs cached.
- */
-#ifndef ARP_TABLE_SIZE
-#define ARP_TABLE_SIZE                  10
-#endif
-
-/**
- * ARP_QUEUEING==1: Multiple outgoing packets are queued during hardware address
- * resolution. By default, only the most recent packet is queued per IP address.
- * This is sufficient for most protocols and mainly reduces TCP connection
- * startup time. Set this to 1 if you know your application sends more than one
- * packet in a row to an IP address that is not in the ARP cache.
- */
-#ifndef ARP_QUEUEING
-#define ARP_QUEUEING                    0
-#endif
-
-/**
- * ETHARP_TRUST_IP_MAC==1: Incoming IP packets cause the ARP table to be
- * updated with the source MAC and IP addresses supplied in the packet.
- * You may want to disable this if you do not trust LAN peers to have the
- * correct addresses, or as a limited approach to attempt to handle
- * spoofing. If disabled, lwIP will need to make a new ARP request if
- * the peer is not already in the ARP table, adding a little latency.
- * The peer *is* in the ARP table if it requested our address before.
- * Also notice that this slows down input processing of every IP packet!
- */
-#ifndef ETHARP_TRUST_IP_MAC
-#define ETHARP_TRUST_IP_MAC             0
-#endif
-
-/**
- * ETHARP_SUPPORT_VLAN==1: support receiving ethernet packets with VLAN header.
- * Additionally, you can define ETHARP_VLAN_CHECK to an u16_t VLAN ID to check.
- * If ETHARP_VLAN_CHECK is defined, only VLAN-traffic for this VLAN is accepted.
- * If ETHARP_VLAN_CHECK is not defined, all traffic is accepted.
- * Alternatively, define a function/define ETHARP_VLAN_CHECK_FN(eth_hdr, vlan)
- * that returns 1 to accept a packet or 0 to drop a packet.
- */
-#ifndef ETHARP_SUPPORT_VLAN
-#define ETHARP_SUPPORT_VLAN             0
-#endif
-
-/** LWIP_ETHERNET==1: enable ethernet support for PPPoE even though ARP
- * might be disabled
- */
-#ifndef LWIP_ETHERNET
-#define LWIP_ETHERNET                   (LWIP_ARP || PPPOE_SUPPORT)
-#endif
-
-/** ETH_PAD_SIZE: number of bytes added before the ethernet header to ensure
- * alignment of payload after that header. Since the header is 14 bytes long,
- * without this padding e.g. addresses in the IP header will not be aligned
- * on a 32-bit boundary, so setting this to 2 can speed up 32-bit-platforms.
- */
-#ifndef ETH_PAD_SIZE
-#define ETH_PAD_SIZE                    0
-#endif
-
-/** ETHARP_SUPPORT_STATIC_ENTRIES==1: enable code to support static ARP table
- * entries (using etharp_add_static_entry/etharp_remove_static_entry).
- */
-#ifndef ETHARP_SUPPORT_STATIC_ENTRIES
-#define ETHARP_SUPPORT_STATIC_ENTRIES   0
-#endif
-
-
-/*
-   --------------------------------
-   ---------- IP options ----------
-   --------------------------------
-*/
-/**
- * IP_FORWARD==1: Enables the ability to forward IP packets across network
- * interfaces. If you are going to run lwIP on a device with only one network
- * interface, define this to 0.
- */
-#ifndef IP_FORWARD
-#define IP_FORWARD                      0
-#endif
-
-/**
- * IP_OPTIONS_ALLOWED: Defines the behavior for IP options.
- *      IP_OPTIONS_ALLOWED==0: All packets with IP options are dropped.
- *      IP_OPTIONS_ALLOWED==1: IP options are allowed (but not parsed).
- */
-#ifndef IP_OPTIONS_ALLOWED
-#define IP_OPTIONS_ALLOWED              1
-#endif
-
-/**
- * IP_REASSEMBLY==1: Reassemble incoming fragmented IP packets. Note that
- * this option does not affect outgoing packet sizes, which can be controlled
- * via IP_FRAG.
- */
-#ifndef IP_REASSEMBLY
-#define IP_REASSEMBLY                   1
-#endif
-
-/**
- * IP_FRAG==1: Fragment outgoing IP packets if their size exceeds MTU. Note
- * that this option does not affect incoming packet sizes, which can be
- * controlled via IP_REASSEMBLY.
- */
-#ifndef IP_FRAG
-#define IP_FRAG                         1
-#endif
-
-/**
- * IP_REASS_MAXAGE: Maximum time (in multiples of IP_TMR_INTERVAL - so seconds, normally)
- * a fragmented IP packet waits for all fragments to arrive. If not all fragments arrived
- * in this time, the whole packet is discarded.
- */
-#ifndef IP_REASS_MAXAGE
-#define IP_REASS_MAXAGE                 3
-#endif
-
-/**
- * IP_REASS_MAX_PBUFS: Total maximum amount of pbufs waiting to be reassembled.
- * Since the received pbufs are enqueued, be sure to configure
- * PBUF_POOL_SIZE > IP_REASS_MAX_PBUFS so that the stack is still able to receive
- * packets even if the maximum amount of fragments is enqueued for reassembly!
- */
-#ifndef IP_REASS_MAX_PBUFS
-#define IP_REASS_MAX_PBUFS              10
-#endif
-
-/**
- * IP_FRAG_USES_STATIC_BUF==1: Use a static MTU-sized buffer for IP
- * fragmentation. Otherwise pbufs are allocated and reference the original
- * packet data to be fragmented (or with LWIP_NETIF_TX_SINGLE_PBUF==1,
- * new PBUF_RAM pbufs are used for fragments).
- * ATTENTION: IP_FRAG_USES_STATIC_BUF==1 may not be used for DMA-enabled MACs!
- */
-#ifndef IP_FRAG_USES_STATIC_BUF
-#define IP_FRAG_USES_STATIC_BUF         0
-#endif
-
-/**
- * IP_FRAG_MAX_MTU: Assumed max MTU on any interface for IP frag buffer
- * (requires IP_FRAG_USES_STATIC_BUF==1)
- */
-#if IP_FRAG_USES_STATIC_BUF && !defined(IP_FRAG_MAX_MTU)
-#define IP_FRAG_MAX_MTU                 1500
-#endif
-
-/**
- * IP_DEFAULT_TTL: Default value for Time-To-Live used by transport layers.
- */
-#ifndef IP_DEFAULT_TTL
-#define IP_DEFAULT_TTL                  255
-#endif
-
-/**
- * IP_SOF_BROADCAST=1: Use the SOF_BROADCAST field to enable broadcast
- * filter per pcb on udp and raw send operations. To enable broadcast filter
- * on recv operations, you also have to set IP_SOF_BROADCAST_RECV=1.
- */
-#ifndef IP_SOF_BROADCAST
-#define IP_SOF_BROADCAST                0
-#endif
-
-/**
- * IP_SOF_BROADCAST_RECV (requires IP_SOF_BROADCAST=1) enable the broadcast
- * filter on recv operations.
- */
-#ifndef IP_SOF_BROADCAST_RECV
-#define IP_SOF_BROADCAST_RECV           0
-#endif
-
-/**
- * IP_FORWARD_ALLOW_TX_ON_RX_NETIF==1: allow ip_forward() to send packets back
- * out on the netif where it was received. This should only be used for
- * wireless networks.
- * ATTENTION: When this is 1, make sure your netif driver correctly marks incoming
- * link-layer-broadcast/multicast packets as such using the corresponding pbuf flags!
- */
-#ifndef IP_FORWARD_ALLOW_TX_ON_RX_NETIF
-#define IP_FORWARD_ALLOW_TX_ON_RX_NETIF 0
-#endif
-
-/**
- * LWIP_RANDOMIZE_INITIAL_LOCAL_PORTS==1: randomize the local port for the first
- * local TCP/UDP pcb (default==0). This can prevent creating predictable port
- * numbers after booting a device.
- */
-#ifndef LWIP_RANDOMIZE_INITIAL_LOCAL_PORTS
-#define LWIP_RANDOMIZE_INITIAL_LOCAL_PORTS 0
-#endif
-
-/*
-   ----------------------------------
-   ---------- ICMP options ----------
-   ----------------------------------
-*/
-/**
- * LWIP_ICMP==1: Enable ICMP module inside the IP stack.
- * Be careful, disable that make your product non-compliant to RFC1122
- */
-#ifndef LWIP_ICMP
-#define LWIP_ICMP                       1
-#endif
-
-/**
- * ICMP_TTL: Default value for Time-To-Live used by ICMP packets.
- */
-#ifndef ICMP_TTL
-#define ICMP_TTL                       (IP_DEFAULT_TTL)
-#endif
-
-/**
- * LWIP_BROADCAST_PING==1: respond to broadcast pings (default is unicast only)
- */
-#ifndef LWIP_BROADCAST_PING
-#define LWIP_BROADCAST_PING             0
-#endif
-
-/**
- * LWIP_MULTICAST_PING==1: respond to multicast pings (default is unicast only)
- */
-#ifndef LWIP_MULTICAST_PING
-#define LWIP_MULTICAST_PING             0
-#endif
-
-/*
-   ---------------------------------
-   ---------- RAW options ----------
-   ---------------------------------
-*/
-/**
- * LWIP_RAW==1: Enable application layer to hook into the IP layer itself.
- */
-#ifndef LWIP_RAW
-#define LWIP_RAW                        1
-#endif
-
-/**
- * LWIP_RAW==1: Enable application layer to hook into the IP layer itself.
- */
-#ifndef RAW_TTL
-#define RAW_TTL                        (IP_DEFAULT_TTL)
-#endif
-
-/*
-   ----------------------------------
-   ---------- DHCP options ----------
-   ----------------------------------
-*/
-/**
- * LWIP_DHCP==1: Enable DHCP module.
- */
-#ifndef LWIP_DHCP
-#define LWIP_DHCP                       0
-#endif
-
-/**
- * DHCP_DOES_ARP_CHECK==1: Do an ARP check on the offered address.
- */
-#ifndef DHCP_DOES_ARP_CHECK
-#define DHCP_DOES_ARP_CHECK             ((LWIP_DHCP) && (LWIP_ARP))
-#endif
-
-/*
-   ------------------------------------
-   ---------- AUTOIP options ----------
-   ------------------------------------
-*/
-/**
- * LWIP_AUTOIP==1: Enable AUTOIP module.
- */
-#ifndef LWIP_AUTOIP
-#define LWIP_AUTOIP                     0
-#endif
-
-/**
- * LWIP_DHCP_AUTOIP_COOP==1: Allow DHCP and AUTOIP to be both enabled on
- * the same interface at the same time.
- */
-#ifndef LWIP_DHCP_AUTOIP_COOP
-#define LWIP_DHCP_AUTOIP_COOP           0
-#endif
-
-/**
- * LWIP_DHCP_AUTOIP_COOP_TRIES: Set to the number of DHCP DISCOVER probes
- * that should be sent before falling back on AUTOIP. This can be set
- * as low as 1 to get an AutoIP address very quickly, but you should
- * be prepared to handle a changing IP address when DHCP overrides
- * AutoIP.
- */
-#ifndef LWIP_DHCP_AUTOIP_COOP_TRIES
-#define LWIP_DHCP_AUTOIP_COOP_TRIES     9
-#endif
-
-/*
-   ----------------------------------
-   ---------- SNMP options ----------
-   ----------------------------------
-*/
-/**
- * LWIP_SNMP==1: Turn on SNMP module. UDP must be available for SNMP
- * transport.
- */
-#ifndef LWIP_SNMP
-#define LWIP_SNMP                       0
-#endif
-
-/**
- * SNMP_CONCURRENT_REQUESTS: Number of concurrent requests the module will
- * allow. At least one request buffer is required.
- * Does not have to be changed unless external MIBs answer request asynchronously
- */
-#ifndef SNMP_CONCURRENT_REQUESTS
-#define SNMP_CONCURRENT_REQUESTS        1
-#endif
-
-/**
- * SNMP_TRAP_DESTINATIONS: Number of trap destinations. At least one trap
- * destination is required
- */
-#ifndef SNMP_TRAP_DESTINATIONS
-#define SNMP_TRAP_DESTINATIONS          1
-#endif
-
-/**
- * SNMP_PRIVATE_MIB:
- * When using a private MIB, you have to create a file 'private_mib.h' that contains
- * a 'struct mib_array_node mib_private' which contains your MIB.
- */
-#ifndef SNMP_PRIVATE_MIB
-#define SNMP_PRIVATE_MIB                0
-#endif
-
-/**
- * Only allow SNMP write actions that are 'safe' (e.g. disabeling netifs is not
- * a safe action and disabled when SNMP_SAFE_REQUESTS = 1).
- * Unsafe requests are disabled by default!
- */
-#ifndef SNMP_SAFE_REQUESTS
-#define SNMP_SAFE_REQUESTS              1
-#endif
-
-/**
- * The maximum length of strings used. This affects the size of
- * MEMP_SNMP_VALUE elements.
- */
-#ifndef SNMP_MAX_OCTET_STRING_LEN
-#define SNMP_MAX_OCTET_STRING_LEN       127
-#endif
-
-/**
- * The maximum depth of the SNMP tree.
- * With private MIBs enabled, this depends on your MIB!
- * This affects the size of MEMP_SNMP_VALUE elements.
- */
-#ifndef SNMP_MAX_TREE_DEPTH
-#define SNMP_MAX_TREE_DEPTH             15
-#endif
-
-/**
- * The size of the MEMP_SNMP_VALUE elements, normally calculated from
- * SNMP_MAX_OCTET_STRING_LEN and SNMP_MAX_TREE_DEPTH.
- */
-#ifndef SNMP_MAX_VALUE_SIZE
-#define SNMP_MAX_VALUE_SIZE             LWIP_MAX((SNMP_MAX_OCTET_STRING_LEN)+1, sizeof(s32_t)*(SNMP_MAX_TREE_DEPTH))
-#endif
-
-/*
-   ----------------------------------
-   ---------- IGMP options ----------
-   ----------------------------------
-*/
-/**
- * LWIP_IGMP==1: Turn on IGMP module.
- */
-#ifndef LWIP_IGMP
-#define LWIP_IGMP                       0
-#endif
-
-/*
-   ----------------------------------
-   ---------- DNS options -----------
-   ----------------------------------
-*/
-/**
- * LWIP_DNS==1: Turn on DNS module. UDP must be available for DNS
- * transport.
- */
-#ifndef LWIP_DNS
-#define LWIP_DNS                        0
-#endif
-
-/** DNS maximum number of entries to maintain locally. */
-#ifndef DNS_TABLE_SIZE
-#define DNS_TABLE_SIZE                  4
-#endif
-
-/** DNS maximum host name length supported in the name table. */
-#ifndef DNS_MAX_NAME_LENGTH
-#define DNS_MAX_NAME_LENGTH             256
-#endif
-
-/** The maximum of DNS servers */
-#ifndef DNS_MAX_SERVERS
-#define DNS_MAX_SERVERS                 2
-#endif
-
-/** DNS do a name checking between the query and the response. */
-#ifndef DNS_DOES_NAME_CHECK
-#define DNS_DOES_NAME_CHECK             1
-#endif
-
-/** DNS message max. size. Default value is RFC compliant. */
-#ifndef DNS_MSG_SIZE
-#define DNS_MSG_SIZE                    512
-#endif
-
-/** DNS_LOCAL_HOSTLIST: Implements a local host-to-address list. If enabled,
- *  you have to define
- *    #define DNS_LOCAL_HOSTLIST_INIT {{"host1", 0x123}, {"host2", 0x234}}
- *  (an array of structs name/address, where address is an u32_t in network
- *  byte order).
- *
- *  Instead, you can also use an external function:
- *  #define DNS_LOOKUP_LOCAL_EXTERN(x) extern u32_t my_lookup_function(const char *name)
- *  that returns the IP address or INADDR_NONE if not found.
- */
-#ifndef DNS_LOCAL_HOSTLIST
-#define DNS_LOCAL_HOSTLIST              0
-#endif /* DNS_LOCAL_HOSTLIST */
-
-/** If this is turned on, the local host-list can be dynamically changed
- *  at runtime. */
-#ifndef DNS_LOCAL_HOSTLIST_IS_DYNAMIC
-#define DNS_LOCAL_HOSTLIST_IS_DYNAMIC   0
-#endif /* DNS_LOCAL_HOSTLIST_IS_DYNAMIC */
-
-/*
-   ---------------------------------
-   ---------- UDP options ----------
-   ---------------------------------
-*/
-/**
- * LWIP_UDP==1: Turn on UDP.
- */
-#ifndef LWIP_UDP
-#define LWIP_UDP                        1
-#endif
-
-/**
- * LWIP_UDPLITE==1: Turn on UDP-Lite. (Requires LWIP_UDP)
- */
-#ifndef LWIP_UDPLITE
-#define LWIP_UDPLITE                    0
-#endif
-
-/**
- * UDP_TTL: Default Time-To-Live value.
- */
-#ifndef UDP_TTL
-#define UDP_TTL                         (IP_DEFAULT_TTL)
-#endif
-
-/**
- * LWIP_NETBUF_RECVINFO==1: append destination addr and port to every netbuf.
- */
-#ifndef LWIP_NETBUF_RECVINFO
-#define LWIP_NETBUF_RECVINFO            0
-#endif
-
-/*
-   ---------------------------------
-   ---------- TCP options ----------
-   ---------------------------------
-*/
-/**
- * LWIP_TCP==1: Turn on TCP.
- */
-#ifndef LWIP_TCP
-#define LWIP_TCP                        1
-#endif
-
-/**
- * TCP_TTL: Default Time-To-Live value.
- */
-#ifndef TCP_TTL
-#define TCP_TTL                         (IP_DEFAULT_TTL)
-#endif
-
-/**
- * TCP_WND: The size of a TCP window.  This must be at least
- * (2 * TCP_MSS) for things to work well
- */
-#ifndef TCP_WND
-#define TCP_WND                         (4 * TCP_MSS)
-#endif
-
-/**
- * TCP_MAXRTX: Maximum number of retransmissions of data segments.
- */
-#ifndef TCP_MAXRTX
-#define TCP_MAXRTX                      12
-#endif
-
-/**
- * TCP_SYNMAXRTX: Maximum number of retransmissions of SYN segments.
- */
-#ifndef TCP_SYNMAXRTX
-#define TCP_SYNMAXRTX                   6
-#endif
-
-/**
- * TCP_QUEUE_OOSEQ==1: TCP will queue segments that arrive out of order.
- * Define to 0 if your device is low on memory.
- */
-#ifndef TCP_QUEUE_OOSEQ
-#define TCP_QUEUE_OOSEQ                 (LWIP_TCP)
-#endif
-
-/**
- * TCP_MSS: TCP Maximum segment size. (default is 536, a conservative default,
- * you might want to increase this.)
- * For the receive side, this MSS is advertised to the remote side
- * when opening a connection. For the transmit size, this MSS sets
- * an upper limit on the MSS advertised by the remote host.
- */
-#ifndef TCP_MSS
-#define TCP_MSS                         536
-#endif
-
-/**
- * TCP_CALCULATE_EFF_SEND_MSS: "The maximum size of a segment that TCP really
- * sends, the 'effective send MSS,' MUST be the smaller of the send MSS (which
- * reflects the available reassembly buffer size at the remote host) and the
- * largest size permitted by the IP layer" (RFC 1122)
- * Setting this to 1 enables code that checks TCP_MSS against the MTU of the
- * netif used for a connection and limits the MSS if it would be too big otherwise.
- */
-#ifndef TCP_CALCULATE_EFF_SEND_MSS
-#define TCP_CALCULATE_EFF_SEND_MSS      1
-#endif
-
-
-/**
- * TCP_SND_BUF: TCP sender buffer space (bytes).
- * To achieve good performance, this should be at least 2 * TCP_MSS.
- */
-#ifndef TCP_SND_BUF
-#define TCP_SND_BUF                     (2 * TCP_MSS)
-#endif
-
-/**
- * TCP_SND_QUEUELEN: TCP sender buffer space (pbufs). This must be at least
- * as much as (2 * TCP_SND_BUF/TCP_MSS) for things to work.
- */
-#ifndef TCP_SND_QUEUELEN
-#define TCP_SND_QUEUELEN                ((4 * (TCP_SND_BUF) + (TCP_MSS - 1))/(TCP_MSS))
-#endif
-
-/**
- * TCP_SNDLOWAT: TCP writable space (bytes). This must be less than
- * TCP_SND_BUF. It is the amount of space which must be available in the
- * TCP snd_buf for select to return writable (combined with TCP_SNDQUEUELOWAT).
- */
-#ifndef TCP_SNDLOWAT
-#define TCP_SNDLOWAT                    LWIP_MIN(LWIP_MAX(((TCP_SND_BUF)/2), (2 * TCP_MSS) + 1), (TCP_SND_BUF) - 1)
-#endif
-
-/**
- * TCP_SNDQUEUELOWAT: TCP writable bufs (pbuf count). This must be less
- * than TCP_SND_QUEUELEN. If the number of pbufs queued on a pcb drops below
- * this number, select returns writable (combined with TCP_SNDLOWAT).
- */
-#ifndef TCP_SNDQUEUELOWAT
-#define TCP_SNDQUEUELOWAT               LWIP_MAX(((TCP_SND_QUEUELEN)/2), 5)
-#endif
-
-/**
- * TCP_OOSEQ_MAX_BYTES: The maximum number of bytes queued on ooseq per pcb.
- * Default is 0 (no limit). Only valid for TCP_QUEUE_OOSEQ==0.
- */
-#ifndef TCP_OOSEQ_MAX_BYTES
-#define TCP_OOSEQ_MAX_BYTES             0
-#endif
-
-/**
- * TCP_OOSEQ_MAX_PBUFS: The maximum number of pbufs queued on ooseq per pcb.
- * Default is 0 (no limit). Only valid for TCP_QUEUE_OOSEQ==0.
- */
-#ifndef TCP_OOSEQ_MAX_PBUFS
-#define TCP_OOSEQ_MAX_PBUFS             0
-#endif
-
-/**
- * TCP_LISTEN_BACKLOG: Enable the backlog option for tcp listen pcb.
- */
-#ifndef TCP_LISTEN_BACKLOG
-#define TCP_LISTEN_BACKLOG              0
-#endif
-
-/**
- * The maximum allowed backlog for TCP listen netconns.
- * This backlog is used unless another is explicitly specified.
- * 0xff is the maximum (u8_t).
- */
-#ifndef TCP_DEFAULT_LISTEN_BACKLOG
-#define TCP_DEFAULT_LISTEN_BACKLOG      0xff
-#endif
-
-/**
- * TCP_OVERSIZE: The maximum number of bytes that tcp_write may
- * allocate ahead of time in an attempt to create shorter pbuf chains
- * for transmission. The meaningful range is 0 to TCP_MSS. Some
- * suggested values are:
- *
- * 0:         Disable oversized allocation. Each tcp_write() allocates a new
-              pbuf (old behaviour).
- * 1:         Allocate size-aligned pbufs with minimal excess. Use this if your
- *            scatter-gather DMA requires aligned fragments.
- * 128:       Limit the pbuf/memory overhead to 20%.
- * TCP_MSS:   Try to create unfragmented TCP packets.
- * TCP_MSS/4: Try to create 4 fragments or less per TCP packet.
- */
-#ifndef TCP_OVERSIZE
-#define TCP_OVERSIZE                    TCP_MSS
-#endif
-
-/**
- * LWIP_TCP_TIMESTAMPS==1: support the TCP timestamp option.
- */
-#ifndef LWIP_TCP_TIMESTAMPS
-#define LWIP_TCP_TIMESTAMPS             0
-#endif
-
-/**
- * TCP_WND_UPDATE_THRESHOLD: difference in window to trigger an
- * explicit window update
- */
-#ifndef TCP_WND_UPDATE_THRESHOLD
-#define TCP_WND_UPDATE_THRESHOLD   (TCP_WND / 4)
-#endif
-
-/**
- * LWIP_EVENT_API and LWIP_CALLBACK_API: Only one of these should be set to 1.
- *     LWIP_EVENT_API==1: The user defines lwip_tcp_event() to receive all
- *         events (accept, sent, etc) that happen in the system.
- *     LWIP_CALLBACK_API==1: The PCB callback function is called directly
- *         for the event. This is the default.
- */
-#if !defined(LWIP_EVENT_API) && !defined(LWIP_CALLBACK_API)
-#define LWIP_EVENT_API                  0
-#define LWIP_CALLBACK_API               1
-#endif
-
-
-/*
-   ----------------------------------
-   ---------- Pbuf options ----------
-   ----------------------------------
-*/
-/**
- * PBUF_LINK_HLEN: the number of bytes that should be allocated for a
- * link level header. The default is 14, the standard value for
- * Ethernet.
- */
-#ifndef PBUF_LINK_HLEN
-#define PBUF_LINK_HLEN                  (14 + ETH_PAD_SIZE)
-#endif
-
-/**
- * PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. The default is
- * designed to accomodate single full size TCP frame in one pbuf, including
- * TCP_MSS, IP header, and link header.
- */
-#ifndef PBUF_POOL_BUFSIZE
-#define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+40+PBUF_LINK_HLEN)
-#endif
-
-/*
-   ------------------------------------------------
-   ---------- Network Interfaces options ----------
-   ------------------------------------------------
-*/
-/**
- * LWIP_NETIF_HOSTNAME==1: use DHCP_OPTION_HOSTNAME with netif's hostname
- * field.
- */
-#ifndef LWIP_NETIF_HOSTNAME
-#define LWIP_NETIF_HOSTNAME             0
-#endif
-
-/**
- * LWIP_NETIF_API==1: Support netif api (in netifapi.c)
- */
-#ifndef LWIP_NETIF_API
-#define LWIP_NETIF_API                  0
-#endif
-
-/**
- * LWIP_NETIF_STATUS_CALLBACK==1: Support a callback function whenever an interface
- * changes its up/down status (i.e., due to DHCP IP acquistion)
- */
-#ifndef LWIP_NETIF_STATUS_CALLBACK
-#define LWIP_NETIF_STATUS_CALLBACK      0
-#endif
-
-/**
- * LWIP_NETIF_LINK_CALLBACK==1: Support a callback function from an interface
- * whenever the link changes (i.e., link down)
- */
-#ifndef LWIP_NETIF_LINK_CALLBACK
-#define LWIP_NETIF_LINK_CALLBACK        0
-#endif
-
-/**
- * LWIP_NETIF_REMOVE_CALLBACK==1: Support a callback function that is called
- * when a netif has been removed
- */
-#ifndef LWIP_NETIF_REMOVE_CALLBACK
-#define LWIP_NETIF_REMOVE_CALLBACK      0
-#endif
-
-/**
- * LWIP_NETIF_HWADDRHINT==1: Cache link-layer-address hints (e.g. table
- * indices) in struct netif. TCP and UDP can make use of this to prevent
- * scanning the ARP table for every sent packet. While this is faster for big
- * ARP tables or many concurrent connections, it might be counterproductive
- * if you have a tiny ARP table or if there never are concurrent connections.
- */
-#ifndef LWIP_NETIF_HWADDRHINT
-#define LWIP_NETIF_HWADDRHINT           0
-#endif
-
-/**
- * LWIP_NETIF_LOOPBACK==1: Support sending packets with a destination IP
- * address equal to the netif IP address, looping them back up the stack.
- */
-#ifndef LWIP_NETIF_LOOPBACK
-#define LWIP_NETIF_LOOPBACK             0
-#endif
-
-/**
- * LWIP_LOOPBACK_MAX_PBUFS: Maximum number of pbufs on queue for loopback
- * sending for each netif (0 = disabled)
- */
-#ifndef LWIP_LOOPBACK_MAX_PBUFS
-#define LWIP_LOOPBACK_MAX_PBUFS         0
-#endif
-
-/**
- * LWIP_NETIF_LOOPBACK_MULTITHREADING: Indicates whether threading is enabled in
- * the system, as netifs must change how they behave depending on this setting
- * for the LWIP_NETIF_LOOPBACK option to work.
- * Setting this is needed to avoid reentering non-reentrant functions like
- * tcp_input().
- *    LWIP_NETIF_LOOPBACK_MULTITHREADING==1: Indicates that the user is using a
- *       multithreaded environment like tcpip.c. In this case, netif->input()
- *       is called directly.
- *    LWIP_NETIF_LOOPBACK_MULTITHREADING==0: Indicates a polling (or NO_SYS) setup.
- *       The packets are put on a list and netif_poll() must be called in
- *       the main application loop.
- */
-#ifndef LWIP_NETIF_LOOPBACK_MULTITHREADING
-#define LWIP_NETIF_LOOPBACK_MULTITHREADING    (!NO_SYS)
-#endif
-
-/**
- * LWIP_NETIF_TX_SINGLE_PBUF: if this is set to 1, lwIP tries to put all data
- * to be sent into one single pbuf. This is for compatibility with DMA-enabled
- * MACs that do not support scatter-gather.
- * Beware that this might involve CPU-memcpy before transmitting that would not
- * be needed without this flag! Use this only if you need to!
- *
- * @todo: TCP and IP-frag do not work with this, yet:
- */
-#ifndef LWIP_NETIF_TX_SINGLE_PBUF
-#define LWIP_NETIF_TX_SINGLE_PBUF             0
-#endif /* LWIP_NETIF_TX_SINGLE_PBUF */
-
-/*
-   ------------------------------------
-   ---------- LOOPIF options ----------
-   ------------------------------------
-*/
-/**
- * LWIP_HAVE_LOOPIF==1: Support loop interface (127.0.0.1) and loopif.c
- */
-#ifndef LWIP_HAVE_LOOPIF
-#define LWIP_HAVE_LOOPIF                0
-#endif
-
-/*
-   ------------------------------------
-   ---------- SLIPIF options ----------
-   ------------------------------------
-*/
-/**
- * LWIP_HAVE_SLIPIF==1: Support slip interface and slipif.c
- */
-#ifndef LWIP_HAVE_SLIPIF
-#define LWIP_HAVE_SLIPIF                0
-#endif
-
-/*
-   ------------------------------------
-   ---------- Thread options ----------
-   ------------------------------------
-*/
-/**
- * TCPIP_THREAD_NAME: The name assigned to the main tcpip thread.
- */
-#ifndef TCPIP_THREAD_NAME
-#define TCPIP_THREAD_NAME              "tcpip_thread"
-#endif
-
-/**
- * TCPIP_THREAD_STACKSIZE: The stack size used by the main tcpip thread.
- * The stack size value itself is platform-dependent, but is passed to
- * sys_thread_new() when the thread is created.
- */
-#ifndef TCPIP_THREAD_STACKSIZE
-#define TCPIP_THREAD_STACKSIZE          1024
-#endif
-
-/**
- * TCPIP_THREAD_PRIO: The priority assigned to the main tcpip thread.
- * The priority value itself is platform-dependent, but is passed to
- * sys_thread_new() when the thread is created.
- */
-#ifndef TCPIP_THREAD_PRIO
-#define TCPIP_THREAD_PRIO               (LOWPRIO + 1)
-#endif
-
-/**
- * TCPIP_MBOX_SIZE: The mailbox size for the tcpip thread messages
- * The queue size value itself is platform-dependent, but is passed to
- * sys_mbox_new() when tcpip_init is called.
- */
-#ifndef TCPIP_MBOX_SIZE
-#define TCPIP_MBOX_SIZE                 MEMP_NUM_PBUF
-#endif
-
-/**
- * SLIPIF_THREAD_NAME: The name assigned to the slipif_loop thread.
- */
-#ifndef SLIPIF_THREAD_NAME
-#define SLIPIF_THREAD_NAME             "slipif_loop"
-#endif
-
-/**
- * SLIP_THREAD_STACKSIZE: The stack size used by the slipif_loop thread.
- * The stack size value itself is platform-dependent, but is passed to
- * sys_thread_new() when the thread is created.
- */
-#ifndef SLIPIF_THREAD_STACKSIZE
-#define SLIPIF_THREAD_STACKSIZE         1024
-#endif
-
-/**
- * SLIPIF_THREAD_PRIO: The priority assigned to the slipif_loop thread.
- * The priority value itself is platform-dependent, but is passed to
- * sys_thread_new() when the thread is created.
- */
-#ifndef SLIPIF_THREAD_PRIO
-#define SLIPIF_THREAD_PRIO              (LOWPRIO + 1)
-#endif
-
-/**
- * PPP_THREAD_NAME: The name assigned to the pppInputThread.
- */
-#ifndef PPP_THREAD_NAME
-#define PPP_THREAD_NAME                "pppInputThread"
-#endif
-
-/**
- * PPP_THREAD_STACKSIZE: The stack size used by the pppInputThread.
- * The stack size value itself is platform-dependent, but is passed to
- * sys_thread_new() when the thread is created.
- */
-#ifndef PPP_THREAD_STACKSIZE
-#define PPP_THREAD_STACKSIZE            1024
-#endif
-
-/**
- * PPP_THREAD_PRIO: The priority assigned to the pppInputThread.
- * The priority value itself is platform-dependent, but is passed to
- * sys_thread_new() when the thread is created.
- */
-#ifndef PPP_THREAD_PRIO
-#define PPP_THREAD_PRIO                 (LOWPRIO + 1)
-#endif
-
-/**
- * DEFAULT_THREAD_NAME: The name assigned to any other lwIP thread.
- */
-#ifndef DEFAULT_THREAD_NAME
-#define DEFAULT_THREAD_NAME            "lwIP"
-#endif
-
-/**
- * DEFAULT_THREAD_STACKSIZE: The stack size used by any other lwIP thread.
- * The stack size value itself is platform-dependent, but is passed to
- * sys_thread_new() when the thread is created.
- */
-#ifndef DEFAULT_THREAD_STACKSIZE
-#define DEFAULT_THREAD_STACKSIZE        1024
-#endif
-
-/**
- * DEFAULT_THREAD_PRIO: The priority assigned to any other lwIP thread.
- * The priority value itself is platform-dependent, but is passed to
- * sys_thread_new() when the thread is created.
- */
-#ifndef DEFAULT_THREAD_PRIO
-#define DEFAULT_THREAD_PRIO             (LOWPRIO + 1)
-#endif
-
-/**
- * DEFAULT_RAW_RECVMBOX_SIZE: The mailbox size for the incoming packets on a
- * NETCONN_RAW. The queue size value itself is platform-dependent, but is passed
- * to sys_mbox_new() when the recvmbox is created.
- */
-#ifndef DEFAULT_RAW_RECVMBOX_SIZE
-#define DEFAULT_RAW_RECVMBOX_SIZE       4
-#endif
-
-/**
- * DEFAULT_UDP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a
- * NETCONN_UDP. The queue size value itself is platform-dependent, but is passed
- * to sys_mbox_new() when the recvmbox is created.
- */
-#ifndef DEFAULT_UDP_RECVMBOX_SIZE
-#define DEFAULT_UDP_RECVMBOX_SIZE       4
-#endif
-
-/**
- * DEFAULT_TCP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a
- * NETCONN_TCP. The queue size value itself is platform-dependent, but is passed
- * to sys_mbox_new() when the recvmbox is created.
- */
-#ifndef DEFAULT_TCP_RECVMBOX_SIZE
-#define DEFAULT_TCP_RECVMBOX_SIZE       40
-#endif
-
-/**
- * DEFAULT_ACCEPTMBOX_SIZE: The mailbox size for the incoming connections.
- * The queue size value itself is platform-dependent, but is passed to
- * sys_mbox_new() when the acceptmbox is created.
- */
-#ifndef DEFAULT_ACCEPTMBOX_SIZE
-#define DEFAULT_ACCEPTMBOX_SIZE         4
-#endif
-
-/*
-   ----------------------------------------------
-   ---------- Sequential layer options ----------
-   ----------------------------------------------
-*/
-/**
- * LWIP_TCPIP_CORE_LOCKING: (EXPERIMENTAL!)
- * Don't use it if you're not an active lwIP project member
- */
-#ifndef LWIP_TCPIP_CORE_LOCKING
-#define LWIP_TCPIP_CORE_LOCKING         0
-#endif
-
-/**
- * LWIP_TCPIP_CORE_LOCKING_INPUT: (EXPERIMENTAL!)
- * Don't use it if you're not an active lwIP project member
- */
-#ifndef LWIP_TCPIP_CORE_LOCKING_INPUT
-#define LWIP_TCPIP_CORE_LOCKING_INPUT   0
-#endif
-
-/**
- * LWIP_NETCONN==1: Enable Netconn API (require to use api_lib.c)
- */
-#ifndef LWIP_NETCONN
-#define LWIP_NETCONN                    1
-#endif
-
-/** LWIP_TCPIP_TIMEOUT==1: Enable tcpip_timeout/tcpip_untimeout tod create
- * timers running in tcpip_thread from another thread.
- */
-#ifndef LWIP_TCPIP_TIMEOUT
-#define LWIP_TCPIP_TIMEOUT              1
-#endif
-
-/*
-   ------------------------------------
-   ---------- Socket options ----------
-   ------------------------------------
-*/
-/**
- * LWIP_SOCKET==1: Enable Socket API (require to use sockets.c)
- */
-#ifndef LWIP_SOCKET
-#define LWIP_SOCKET                     1
-#endif
-
-/**
- * LWIP_COMPAT_SOCKETS==1: Enable BSD-style sockets functions names.
- * (only used if you use sockets.c)
- */
-#ifndef LWIP_COMPAT_SOCKETS
-#define LWIP_COMPAT_SOCKETS             1
-#endif
-
-/**
- * LWIP_POSIX_SOCKETS_IO_NAMES==1: Enable POSIX-style sockets functions names.
- * Disable this option if you use a POSIX operating system that uses the same
- * names (read, write & close). (only used if you use sockets.c)
- */
-#ifndef LWIP_POSIX_SOCKETS_IO_NAMES
-#define LWIP_POSIX_SOCKETS_IO_NAMES     1
-#endif
-
-/**
- * LWIP_TCP_KEEPALIVE==1: Enable TCP_KEEPIDLE, TCP_KEEPINTVL and TCP_KEEPCNT
- * options processing. Note that TCP_KEEPIDLE and TCP_KEEPINTVL have to be set
- * in seconds. (does not require sockets.c, and will affect tcp.c)
- */
-#ifndef LWIP_TCP_KEEPALIVE
-#define LWIP_TCP_KEEPALIVE              0
-#endif
-
-/**
- * LWIP_SO_SNDTIMEO==1: Enable send timeout for sockets/netconns and
- * SO_SNDTIMEO processing.
- */
-#ifndef LWIP_SO_SNDTIMEO
-#define LWIP_SO_SNDTIMEO                0
-#endif
-
-/**
- * LWIP_SO_RCVTIMEO==1: Enable receive timeout for sockets/netconns and
- * SO_RCVTIMEO processing.
- */
-#ifndef LWIP_SO_RCVTIMEO
-#define LWIP_SO_RCVTIMEO                0
-#endif
-
-/**
- * LWIP_SO_RCVBUF==1: Enable SO_RCVBUF processing.
- */
-#ifndef LWIP_SO_RCVBUF
-#define LWIP_SO_RCVBUF                  0
-#endif
-
-/**
- * If LWIP_SO_RCVBUF is used, this is the default value for recv_bufsize.
- */
-#ifndef RECV_BUFSIZE_DEFAULT
-#define RECV_BUFSIZE_DEFAULT            INT_MAX
-#endif
-
-/**
- * SO_REUSE==1: Enable SO_REUSEADDR option.
- */
-#ifndef SO_REUSE
-#define SO_REUSE                        0
-#endif
-
-/**
- * SO_REUSE_RXTOALL==1: Pass a copy of incoming broadcast/multicast packets
- * to all local matches if SO_REUSEADDR is turned on.
- * WARNING: Adds a memcpy for every packet if passing to more than one pcb!
- */
-#ifndef SO_REUSE_RXTOALL
-#define SO_REUSE_RXTOALL                0
-#endif
-
-/*
-   ----------------------------------------
-   ---------- Statistics options ----------
-   ----------------------------------------
-*/
-/**
- * LWIP_STATS==1: Enable statistics collection in lwip_stats.
- */
-#ifndef LWIP_STATS
-#define LWIP_STATS                      1
-#endif
-
-#if LWIP_STATS
-
-/**
- * LWIP_STATS_DISPLAY==1: Compile in the statistics output functions.
- */
-#ifndef LWIP_STATS_DISPLAY
-#define LWIP_STATS_DISPLAY              0
-#endif
-
-/**
- * LINK_STATS==1: Enable link stats.
- */
-#ifndef LINK_STATS
-#define LINK_STATS                      1
-#endif
-
-/**
- * ETHARP_STATS==1: Enable etharp stats.
- */
-#ifndef ETHARP_STATS
-#define ETHARP_STATS                    (LWIP_ARP)
-#endif
-
-/**
- * IP_STATS==1: Enable IP stats.
- */
-#ifndef IP_STATS
-#define IP_STATS                        1
-#endif
-
-/**
- * IPFRAG_STATS==1: Enable IP fragmentation stats. Default is
- * on if using either frag or reass.
- */
-#ifndef IPFRAG_STATS
-#define IPFRAG_STATS                    (IP_REASSEMBLY || IP_FRAG)
-#endif
-
-/**
- * ICMP_STATS==1: Enable ICMP stats.
- */
-#ifndef ICMP_STATS
-#define ICMP_STATS                      1
-#endif
-
-/**
- * IGMP_STATS==1: Enable IGMP stats.
- */
-#ifndef IGMP_STATS
-#define IGMP_STATS                      (LWIP_IGMP)
-#endif
-
-/**
- * UDP_STATS==1: Enable UDP stats. Default is on if
- * UDP enabled, otherwise off.
- */
-#ifndef UDP_STATS
-#define UDP_STATS                       (LWIP_UDP)
-#endif
-
-/**
- * TCP_STATS==1: Enable TCP stats. Default is on if TCP
- * enabled, otherwise off.
- */
-#ifndef TCP_STATS
-#define TCP_STATS                       (LWIP_TCP)
-#endif
-
-/**
- * MEM_STATS==1: Enable mem.c stats.
- */
-#ifndef MEM_STATS
-#define MEM_STATS                       ((MEM_LIBC_MALLOC == 0) && (MEM_USE_POOLS == 0))
-#endif
-
-/**
- * MEMP_STATS==1: Enable memp.c pool stats.
- */
-#ifndef MEMP_STATS
-#define MEMP_STATS                      (MEMP_MEM_MALLOC == 0)
-#endif
-
-/**
- * SYS_STATS==1: Enable system stats (sem and mbox counts, etc).
- */
-#ifndef SYS_STATS
-#define SYS_STATS                       (NO_SYS == 0)
-#endif
-
-#else
-
-#define LINK_STATS                      0
-#define IP_STATS                        0
-#define IPFRAG_STATS                    0
-#define ICMP_STATS                      0
-#define IGMP_STATS                      0
-#define UDP_STATS                       0
-#define TCP_STATS                       0
-#define MEM_STATS                       0
-#define MEMP_STATS                      0
-#define SYS_STATS                       0
-#define LWIP_STATS_DISPLAY              0
-
-#endif /* LWIP_STATS */
-
-/*
-   ---------------------------------
-   ---------- PPP options ----------
-   ---------------------------------
-*/
-/**
- * PPP_SUPPORT==1: Enable PPP.
- */
-#ifndef PPP_SUPPORT
-#define PPP_SUPPORT                     0
-#endif
-
-/**
- * PPPOE_SUPPORT==1: Enable PPP Over Ethernet
- */
-#ifndef PPPOE_SUPPORT
-#define PPPOE_SUPPORT                   0
-#endif
-
-/**
- * PPPOS_SUPPORT==1: Enable PPP Over Serial
- */
-#ifndef PPPOS_SUPPORT
-#define PPPOS_SUPPORT                   PPP_SUPPORT
-#endif
-
-#if PPP_SUPPORT
-
-/**
- * NUM_PPP: Max PPP sessions.
- */
-#ifndef NUM_PPP
-#define NUM_PPP                         1
-#endif
-
-/**
- * PAP_SUPPORT==1: Support PAP.
- */
-#ifndef PAP_SUPPORT
-#define PAP_SUPPORT                     0
-#endif
-
-/**
- * CHAP_SUPPORT==1: Support CHAP.
- */
-#ifndef CHAP_SUPPORT
-#define CHAP_SUPPORT                    0
-#endif
-
-/**
- * MSCHAP_SUPPORT==1: Support MSCHAP. CURRENTLY NOT SUPPORTED! DO NOT SET!
- */
-#ifndef MSCHAP_SUPPORT
-#define MSCHAP_SUPPORT                  0
-#endif
-
-/**
- * CBCP_SUPPORT==1: Support CBCP. CURRENTLY NOT SUPPORTED! DO NOT SET!
- */
-#ifndef CBCP_SUPPORT
-#define CBCP_SUPPORT                    0
-#endif
-
-/**
- * CCP_SUPPORT==1: Support CCP. CURRENTLY NOT SUPPORTED! DO NOT SET!
- */
-#ifndef CCP_SUPPORT
-#define CCP_SUPPORT                     0
-#endif
-
-/**
- * VJ_SUPPORT==1: Support VJ header compression.
- */
-#ifndef VJ_SUPPORT
-#define VJ_SUPPORT                      0
-#endif
-
-/**
- * MD5_SUPPORT==1: Support MD5 (see also CHAP).
- */
-#ifndef MD5_SUPPORT
-#define MD5_SUPPORT                     0
-#endif
-
-/*
- * Timeouts
- */
-#ifndef FSM_DEFTIMEOUT
-#define FSM_DEFTIMEOUT                  6       /* Timeout time in seconds */
-#endif
-
-#ifndef FSM_DEFMAXTERMREQS
-#define FSM_DEFMAXTERMREQS              2       /* Maximum Terminate-Request transmissions */
-#endif
-
-#ifndef FSM_DEFMAXCONFREQS
-#define FSM_DEFMAXCONFREQS              10      /* Maximum Configure-Request transmissions */
-#endif
-
-#ifndef FSM_DEFMAXNAKLOOPS
-#define FSM_DEFMAXNAKLOOPS              5       /* Maximum number of nak loops */
-#endif
-
-#ifndef UPAP_DEFTIMEOUT
-#define UPAP_DEFTIMEOUT                 6       /* Timeout (seconds) for retransmitting req */
-#endif
-
-#ifndef UPAP_DEFREQTIME
-#define UPAP_DEFREQTIME                 30      /* Time to wait for auth-req from peer */
-#endif
-
-#ifndef CHAP_DEFTIMEOUT
-#define CHAP_DEFTIMEOUT                 6       /* Timeout time in seconds */
-#endif
-
-#ifndef CHAP_DEFTRANSMITS
-#define CHAP_DEFTRANSMITS               10      /* max # times to send challenge */
-#endif
-
-/* Interval in seconds between keepalive echo requests, 0 to disable. */
-#ifndef LCP_ECHOINTERVAL
-#define LCP_ECHOINTERVAL                0
-#endif
-
-/* Number of unanswered echo requests before failure. */
-#ifndef LCP_MAXECHOFAILS
-#define LCP_MAXECHOFAILS                3
-#endif
-
-/* Max Xmit idle time (in jiffies) before resend flag char. */
-#ifndef PPP_MAXIDLEFLAG
-#define PPP_MAXIDLEFLAG                 100
-#endif
-
-/*
- * Packet sizes
- *
- * Note - lcp shouldn't be allowed to negotiate stuff outside these
- *    limits.  See lcp.h in the pppd directory.
- * (XXX - these constants should simply be shared by lcp.c instead
- *    of living in lcp.h)
- */
-#define PPP_MTU                         1500     /* Default MTU (size of Info field) */
-#ifndef PPP_MAXMTU
-/* #define PPP_MAXMTU  65535 - (PPP_HDRLEN + PPP_FCSLEN) */
-#define PPP_MAXMTU                      1500 /* Largest MTU we allow */
-#endif
-#define PPP_MINMTU                      64
-#define PPP_MRU                         1500     /* default MRU = max length of info field */
-#define PPP_MAXMRU                      1500     /* Largest MRU we allow */
-#ifndef PPP_DEFMRU
-#define PPP_DEFMRU                      296             /* Try for this */
-#endif
-#define PPP_MINMRU                      128             /* No MRUs below this */
-
-#ifndef MAXNAMELEN
-#define MAXNAMELEN                      256     /* max length of hostname or name for auth */
-#endif
-#ifndef MAXSECRETLEN
-#define MAXSECRETLEN                    256     /* max length of password or secret */
-#endif
-
-#endif /* PPP_SUPPORT */
-
-/*
-   --------------------------------------
-   ---------- Checksum options ----------
-   --------------------------------------
-*/
-/**
- * CHECKSUM_GEN_IP==1: Generate checksums in software for outgoing IP packets.
- */
-#ifndef CHECKSUM_GEN_IP
-#define CHECKSUM_GEN_IP                 1
-#endif
-
-/**
- * CHECKSUM_GEN_UDP==1: Generate checksums in software for outgoing UDP packets.
- */
-#ifndef CHECKSUM_GEN_UDP
-#define CHECKSUM_GEN_UDP                1
-#endif
-
-/**
- * CHECKSUM_GEN_TCP==1: Generate checksums in software for outgoing TCP packets.
- */
-#ifndef CHECKSUM_GEN_TCP
-#define CHECKSUM_GEN_TCP                1
-#endif
-
-/**
- * CHECKSUM_GEN_ICMP==1: Generate checksums in software for outgoing ICMP packets.
- */
-#ifndef CHECKSUM_GEN_ICMP
-#define CHECKSUM_GEN_ICMP               1
-#endif
-
-/**
- * CHECKSUM_CHECK_IP==1: Check checksums in software for incoming IP packets.
- */
-#ifndef CHECKSUM_CHECK_IP
-#define CHECKSUM_CHECK_IP               1
-#endif
-
-/**
- * CHECKSUM_CHECK_UDP==1: Check checksums in software for incoming UDP packets.
- */
-#ifndef CHECKSUM_CHECK_UDP
-#define CHECKSUM_CHECK_UDP              1
-#endif
-
-/**
- * CHECKSUM_CHECK_TCP==1: Check checksums in software for incoming TCP packets.
- */
-#ifndef CHECKSUM_CHECK_TCP
-#define CHECKSUM_CHECK_TCP              1
-#endif
-
-/**
- * LWIP_CHECKSUM_ON_COPY==1: Calculate checksum when copying data from
- * application buffers to pbufs.
- */
-#ifndef LWIP_CHECKSUM_ON_COPY
-#define LWIP_CHECKSUM_ON_COPY           0
-#endif
-
-/*
-   ---------------------------------------
-   ---------- Hook options ---------------
-   ---------------------------------------
-*/
-
-/* Hooks are undefined by default, define them to a function if you need them. */
-
-/**
- * LWIP_HOOK_IP4_INPUT(pbuf, input_netif):
- * - called from ip_input() (IPv4)
- * - pbuf: received struct pbuf passed to ip_input()
- * - input_netif: struct netif on which the packet has been received
- * Return values:
- * - 0: Hook has not consumed the packet, packet is processed as normal
- * - != 0: Hook has consumed the packet.
- * If the hook consumed the packet, 'pbuf' is in the responsibility of the hook
- * (i.e. free it when done).
- */
-
-/**
- * LWIP_HOOK_IP4_ROUTE(dest):
- * - called from ip_route() (IPv4)
- * - dest: destination IPv4 address
- * Returns the destination netif or NULL if no destination netif is found. In
- * that case, ip_route() continues as normal.
- */
-
-/*
-   ---------------------------------------
-   ---------- Debugging options ----------
-   ---------------------------------------
-*/
-/**
- * LWIP_DBG_MIN_LEVEL: After masking, the value of the debug is
- * compared against this value. If it is smaller, then debugging
- * messages are written.
- */
-#ifndef LWIP_DBG_MIN_LEVEL
-#define LWIP_DBG_MIN_LEVEL              LWIP_DBG_LEVEL_ALL
-#endif
-
-/**
- * LWIP_DBG_TYPES_ON: A mask that can be used to globally enable/disable
- * debug messages of certain types.
- */
-#ifndef LWIP_DBG_TYPES_ON
-#define LWIP_DBG_TYPES_ON               LWIP_DBG_ON
-#endif
-
-/**
- * ETHARP_DEBUG: Enable debugging in etharp.c.
- */
-#ifndef ETHARP_DEBUG
-#define ETHARP_DEBUG                    LWIP_DBG_OFF
-#endif
-
-/**
- * NETIF_DEBUG: Enable debugging in netif.c.
- */
-#ifndef NETIF_DEBUG
-#define NETIF_DEBUG                     LWIP_DBG_OFF
-#endif
-
-/**
- * PBUF_DEBUG: Enable debugging in pbuf.c.
- */
-#ifndef PBUF_DEBUG
-#define PBUF_DEBUG                      LWIP_DBG_OFF
-#endif
-
-/**
- * API_LIB_DEBUG: Enable debugging in api_lib.c.
- */
-#ifndef API_LIB_DEBUG
-#define API_LIB_DEBUG                   LWIP_DBG_OFF
-#endif
-
-/**
- * API_MSG_DEBUG: Enable debugging in api_msg.c.
- */
-#ifndef API_MSG_DEBUG
-#define API_MSG_DEBUG                   LWIP_DBG_OFF
-#endif
-
-/**
- * SOCKETS_DEBUG: Enable debugging in sockets.c.
- */
-#ifndef SOCKETS_DEBUG
-#define SOCKETS_DEBUG                   LWIP_DBG_OFF
-#endif
-
-/**
- * ICMP_DEBUG: Enable debugging in icmp.c.
- */
-#ifndef ICMP_DEBUG
-#define ICMP_DEBUG                      LWIP_DBG_OFF
-#endif
-
-/**
- * IGMP_DEBUG: Enable debugging in igmp.c.
- */
-#ifndef IGMP_DEBUG
-#define IGMP_DEBUG                      LWIP_DBG_OFF
-#endif
-
-/**
- * INET_DEBUG: Enable debugging in inet.c.
- */
-#ifndef INET_DEBUG
-#define INET_DEBUG                      LWIP_DBG_OFF
-#endif
-
-/**
- * IP_DEBUG: Enable debugging for IP.
- */
-#ifndef IP_DEBUG
-#define IP_DEBUG                        LWIP_DBG_OFF
-#endif
-
-/**
- * IP_REASS_DEBUG: Enable debugging in ip_frag.c for both frag & reass.
- */
-#ifndef IP_REASS_DEBUG
-#define IP_REASS_DEBUG                  LWIP_DBG_OFF
-#endif
-
-/**
- * RAW_DEBUG: Enable debugging in raw.c.
- */
-#ifndef RAW_DEBUG
-#define RAW_DEBUG                       LWIP_DBG_OFF
-#endif
-
-/**
- * MEM_DEBUG: Enable debugging in mem.c.
- */
-#ifndef MEM_DEBUG
-#define MEM_DEBUG                       LWIP_DBG_OFF
-#endif
-
-/**
- * MEMP_DEBUG: Enable debugging in memp.c.
- */
-#ifndef MEMP_DEBUG
-#define MEMP_DEBUG                      LWIP_DBG_OFF
-#endif
-
-/**
- * SYS_DEBUG: Enable debugging in sys.c.
- */
-#ifndef SYS_DEBUG
-#define SYS_DEBUG                       LWIP_DBG_OFF
-#endif
-
-/**
- * TIMERS_DEBUG: Enable debugging in timers.c.
- */
-#ifndef TIMERS_DEBUG
-#define TIMERS_DEBUG                    LWIP_DBG_OFF
-#endif
-
-/**
- * TCP_DEBUG: Enable debugging for TCP.
- */
-#ifndef TCP_DEBUG
-#define TCP_DEBUG                       LWIP_DBG_OFF
-#endif
-
-/**
- * TCP_INPUT_DEBUG: Enable debugging in tcp_in.c for incoming debug.
- */
-#ifndef TCP_INPUT_DEBUG
-#define TCP_INPUT_DEBUG                 LWIP_DBG_OFF
-#endif
-
-/**
- * TCP_FR_DEBUG: Enable debugging in tcp_in.c for fast retransmit.
- */
-#ifndef TCP_FR_DEBUG
-#define TCP_FR_DEBUG                    LWIP_DBG_OFF
-#endif
-
-/**
- * TCP_RTO_DEBUG: Enable debugging in TCP for retransmit
- * timeout.
- */
-#ifndef TCP_RTO_DEBUG
-#define TCP_RTO_DEBUG                   LWIP_DBG_OFF
-#endif
-
-/**
- * TCP_CWND_DEBUG: Enable debugging for TCP congestion window.
- */
-#ifndef TCP_CWND_DEBUG
-#define TCP_CWND_DEBUG                  LWIP_DBG_OFF
-#endif
-
-/**
- * TCP_WND_DEBUG: Enable debugging in tcp_in.c for window updating.
- */
-#ifndef TCP_WND_DEBUG
-#define TCP_WND_DEBUG                   LWIP_DBG_OFF
-#endif
-
-/**
- * TCP_OUTPUT_DEBUG: Enable debugging in tcp_out.c output functions.
- */
-#ifndef TCP_OUTPUT_DEBUG
-#define TCP_OUTPUT_DEBUG                LWIP_DBG_OFF
-#endif
-
-/**
- * TCP_RST_DEBUG: Enable debugging for TCP with the RST message.
- */
-#ifndef TCP_RST_DEBUG
-#define TCP_RST_DEBUG                   LWIP_DBG_OFF
-#endif
-
-/**
- * TCP_QLEN_DEBUG: Enable debugging for TCP queue lengths.
- */
-#ifndef TCP_QLEN_DEBUG
-#define TCP_QLEN_DEBUG                  LWIP_DBG_OFF
-#endif
-
-/**
- * UDP_DEBUG: Enable debugging in UDP.
- */
-#ifndef UDP_DEBUG
-#define UDP_DEBUG                       LWIP_DBG_OFF
-#endif
-
-/**
- * TCPIP_DEBUG: Enable debugging in tcpip.c.
- */
-#ifndef TCPIP_DEBUG
-#define TCPIP_DEBUG                     LWIP_DBG_OFF
-#endif
-
-/**
- * PPP_DEBUG: Enable debugging for PPP.
- */
-#ifndef PPP_DEBUG
-#define PPP_DEBUG                       LWIP_DBG_OFF
-#endif
-
-/**
- * SLIP_DEBUG: Enable debugging in slipif.c.
- */
-#ifndef SLIP_DEBUG
-#define SLIP_DEBUG                      LWIP_DBG_OFF
-#endif
-
-/**
- * DHCP_DEBUG: Enable debugging in dhcp.c.
- */
-#ifndef DHCP_DEBUG
-#define DHCP_DEBUG                      LWIP_DBG_OFF
-#endif
-
-/**
- * AUTOIP_DEBUG: Enable debugging in autoip.c.
- */
-#ifndef AUTOIP_DEBUG
-#define AUTOIP_DEBUG                    LWIP_DBG_OFF
-#endif
-
-/**
- * SNMP_MSG_DEBUG: Enable debugging for SNMP messages.
- */
-#ifndef SNMP_MSG_DEBUG
-#define SNMP_MSG_DEBUG                  LWIP_DBG_OFF
-#endif
-
-/**
- * SNMP_MIB_DEBUG: Enable debugging for SNMP MIBs.
- */
-#ifndef SNMP_MIB_DEBUG
-#define SNMP_MIB_DEBUG                  LWIP_DBG_OFF
-#endif
-
-/**
- * DNS_DEBUG: Enable debugging for DNS.
- */
-#ifndef DNS_DEBUG
-#define DNS_DEBUG                       LWIP_DBG_OFF
-#endif
-
-#endif /* __LWIPOPT_H__ */