diff --git a/os/io/platforms/STM32F103/pal_lld.c b/os/io/platforms/STM32F103/pal_lld.c new file mode 100644 index 000000000..f2fad1360 --- /dev/null +++ b/os/io/platforms/STM32F103/pal_lld.c @@ -0,0 +1,158 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +/** + * @file STM32F103/pal_lld.c + * @brief STM32 GPIO low level driver code + * @addtogroup STM32F103_PAL + * @{ + */ + +#include +#include + +#if defined(STM32F10X_LD) +#define APB2_RST_MASK (RCC_APB2RSTR_IOPARST | RCC_APB2RSTR_IOPBRST | \ + RCC_APB2RSTR_IOPCRST | RCC_APB2RSTR_IOPDRST | \ + RCC_APB2RSTR_AFIORST) +#define APB2_EN_MASK (RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN | \ + RCC_APB2ENR_IOPCEN | RCC_APB2ENR_IOPDEN | \ + RCC_APB2ENR_AFIOEN) +#elif defined(STM32F10X_HD) +#define APB2_RST_MASK (RCC_APB2RSTR_IOPARST | RCC_APB2RSTR_IOPBRST | \ + RCC_APB2RSTR_IOPCRST | RCC_APB2RSTR_IOPDRST | \ + RCC_APB2RSTR_IOPERST | RCC_APB2RSTR_IOPFRST | \ + RCC_APB2RSTR_IOPGRST | RCC_APB2RSTR_AFIORST); +#define APB2_EN_MASK (RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN | \ + RCC_APB2ENR_IOPCEN | RCC_APB2ENR_IOPDEN | \ + RCC_APB2ENR_IOPEEN | RCC_APB2ENR_IOPFEN | \ + RCC_APB2ENR_IOPGEN | RCC_APB2ENR_AFIOEN) +#else + /* Defaults on Medium Density devices.*/ +#define APB2_RST_MASK (RCC_APB2RSTR_IOPARST | RCC_APB2RSTR_IOPBRST | \ + RCC_APB2RSTR_IOPCRST | RCC_APB2RSTR_IOPDRST | \ + RCC_APB2RSTR_IOPERST | RCC_APB2RSTR_AFIORST); +#define APB2_EN_MASK (RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN | \ + RCC_APB2ENR_IOPCEN | RCC_APB2ENR_IOPDEN | \ + RCC_APB2ENR_IOPEEN | RCC_APB2ENR_AFIOEN) +#endif + +/** + * @brief STM32 I/O ports configuration. + * @details Ports A-D(E, F, G) clocks enabled, AFIO clock enabled. + * + * @param[in] config the STM32 ports configuration + */ +void _pal_lld_init(const STM32GPIOConfig *config) { + + /* + * Enables the GPIO related clocks. + */ + RCC->APB2ENR |= APB2_EN_MASK; + + /* + * Resets the GPIO ports and AFIO. + */ + RCC->APB2RSTR = APB2_RST_MASK; + RCC->APB2RSTR = 0; + + IOPORT_A->ODR = config->PAData.odr; + IOPORT_A->CRH = config->PAData.crh; + IOPORT_A->CRL = config->PAData.crl; + IOPORT_B->ODR = config->PBData.odr; + IOPORT_B->CRH = config->PBData.crh; + IOPORT_B->CRL = config->PBData.crl; + IOPORT_C->ODR = config->PCData.odr; + IOPORT_C->CRH = config->PCData.crh; + IOPORT_C->CRL = config->PCData.crl; + IOPORT_D->ODR = config->PDData.odr; + IOPORT_D->CRH = config->PDData.crh; + IOPORT_D->CRL = config->PDData.crl; +#if !defined(STM32F10X_LD) || defined(__DOXYGEN__) + IOPORT_E->ODR = config->PEData.odr; + IOPORT_E->CRH = config->PEData.crh; + IOPORT_E->CRL = config->PEData.crl; +#endif +#if defined(STM32F10X_HD) || defined(__DOXYGEN__) + IOPORT_F->ODR = config->PFData.odr; + IOPORT_F->CRH = config->PFData.crh; + IOPORT_F->CRL = config->PFData.crl; + IOPORT_G->ODR = config->PGData.odr; + IOPORT_G->CRH = config->PGData.crh; + IOPORT_G->CRL = config->PGData.crl; +#endif +} + +/** + * @brief Pads mode setup. + * @details This function programs a pads group belonging to the same port + * with the specified mode. + * + * @param[in] port the port identifier + * @param[in] mask the group mask + * @param[in] mode the mode + * + * @note This function is not meant to be invoked directly by the application + * code. + * @note @p PAL_MODE_UNCONNECTED is implemented as push pull output at 2MHz. + * @note Writing on pads programmed as pull-up or pull-down has the side + * effect to modify the resistor setting because the output latched data + * is used for the resistor selection. + */ +void _pal_lld_setgroupmode(ioportid_t port, + ioportmask_t mask, + uint_fast8_t mode) { + static const uint8_t cfgtab[] = { + 4, /* PAL_MODE_RESET, implemented as input.*/ + 2, /* PAL_MODE_UNCONNECTED, implemented as push pull output 2MHz.*/ + 4, /* PAL_MODE_INPUT */ + 8, /* PAL_MODE_INPUT_PULLUP */ + 8, /* PAL_MODE_INPUT_PULLDOWN */ + 3, /* PAL_MODE_OUTPUT_PUSHPULL, 50MHz.*/ + 7, /* PAL_MODE_OUTPUT_OPENDRAIN, 50MHz.*/ + }; + uint32_t mh, ml, crh, crl, cfg; + unsigned i; + + if (mode == PAL_MODE_INPUT_PULLUP) + port->BSRR = mask; + else if (mode == PAL_MODE_INPUT_PULLDOWN) + port->BRR = mask; + cfg = cfgtab[mode]; + mh = ml = crh = crl = 0; + for (i = 0; i < 8; i++) { + ml <<= 4; + mh <<= 4; + crl <<= 4; + crh <<= 4; + if ((mask & 1) == 0) + ml |= 0xf; + else + crl |= cfg; + if ((mask & 0x10000) == 0) + mh |= 0xf; + else + crh |= cfg; + mask >>= 1; + } + port->CRH = (port->CRH & mh) | crh; + port->CRL = (port->CRL & ml) | crl; +} + +/** @} */ diff --git a/os/io/platforms/STM32F103/pal_lld.h b/os/io/platforms/STM32F103/pal_lld.h new file mode 100644 index 000000000..3a0811ac2 --- /dev/null +++ b/os/io/platforms/STM32F103/pal_lld.h @@ -0,0 +1,307 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +/** + * @file STM32F103/pal_lld.h + * @brief STM32 GPIO low level driver header + * @addtogroup STM32F103_PAL + * @{ + */ + +#ifndef _PAL_LLD_H_ +#define _PAL_LLD_H_ + +/* + * Tricks required to make the TRUE/FALSE declaration inside the library + * compatible. + */ +#ifndef __STM32F10x_H +#undef FALSE +#undef TRUE +#include +#define FALSE 0 +#define TRUE (!FALSE) +#endif + +/*===========================================================================*/ +/* I/O Ports Types and constants. */ +/*===========================================================================*/ + +/** + * @brief GPIO port setup info. + */ +typedef struct { + /** Initial value for ODR register.*/ + uint32_t odr; + /** Initial value for CRL register.*/ + uint32_t crl; + /** Initial value for CRH register.*/ + uint32_t crh; +} stm32_gpio_setup_t; + +/** + * @brief STM32 GPIO static initializer. + * @details An instance of this structure must be passed to @p palInit() at + * system startup time in order to initialized the digital I/O + * subsystem. This represents only the initial setup, specific pads + * or whole ports can be reprogrammed at later time. + */ +typedef struct { + /** @brief Port A setup data.*/ + stm32_gpio_setup_t PAData; + /** @brief Port B setup data.*/ + stm32_gpio_setup_t PBData; + /** @brief Port C setup data.*/ + stm32_gpio_setup_t PCData; + /** @brief Port D setup data.*/ + stm32_gpio_setup_t PDData; +#if !defined(STM32F10X_LD) || defined(__DOXYGEN__) + /** @brief Port E setup data.*/ + stm32_gpio_setup_t PEData; +#endif +#if defined(STM32F10X_HD) || defined(__DOXYGEN__) + /** @brief Port F setup data.*/ + stm32_gpio_setup_t PFData; + /** @brief Port G setup data.*/ + stm32_gpio_setup_t PGData; +#endif +} STM32GPIOConfig; + +/** + * @brief Width, in bits, of an I/O port. + */ +#define PAL_IOPORTS_WIDTH 16 + +/** + * @brief Whole port mask. + * @brief This macro specifies all the valid bits into a port. + */ +#define PAL_WHOLE_PORT ((ioportmask_t)0xFFFF) + +/** + * @brief Digital I/O port sized unsigned type. + */ +typedef uint32_t ioportmask_t; + +/** + * @brief Port Identifier. + * @details This type can be a scalar or some kind of pointer, do not make + * any assumption about it, use the provided macros when populating + * variables of this type. + */ +typedef GPIO_TypeDef * ioportid_t; + +/*===========================================================================*/ +/* I/O Ports Identifiers. */ +/* The low level driver wraps the definitions already present in the STM32 */ +/* firmware library. */ +/*===========================================================================*/ + +/** + * @brief GPIO port A identifier. + */ +#define IOPORT_A GPIOA + +/** + * @brief GPIO port B identifier. + */ +#define IOPORT_B GPIOB + +/** + * @brief GPIO port C identifier. + */ +#define IOPORT_C GPIOC + +/** + * @brief GPIO port D identifier. + */ +#define IOPORT_D GPIOD + +/** + * @brief GPIO port E identifier. + */ +#if !defined(STM32F10X_LD) || defined(__DOXYGEN__) +#define IOPORT_E GPIOE +#endif + +/** + * @brief GPIO port F identifier. + */ +#if defined(STM32F10X_HD) || defined(__DOXYGEN__) +#define IOPORT_F GPIOF + +/** + * @brief GPIO port G identifier. + */ +#define IOPORT_G GPIOG +#endif + +/*===========================================================================*/ +/* Implementation, some of the following macros could be implemented as */ +/* functions, please put them in a file named ioports_lld.c if so. */ +/*===========================================================================*/ + +/** + * @brief GPIO ports subsystem initialization. + */ +#define pal_lld_init(config) _pal_lld_init(config) + +/** + * @brief Reads an I/O port. + * @details This function is implemented by reading the GPIO IDR register, the + * implementation has no side effects. + * + * @param[in] port the port identifier + * @return the port bits + * + * @note This function is not meant to be invoked directly by the application + * code. + */ +#define pal_lld_readport(port) ((port)->IDR) + +/** + * @brief Reads the output latch. + * @details This function is implemented by reading the GPIO ODR register, the + * implementation has no side effects. + * + * @param[in] port the port identifier + * @return The latched logical states. + * + * @note This function is not meant to be invoked directly by the application + * code. + */ +#define pal_lld_readlatch(port) ((port)->ODR) + +/** + * @brief Writes on a I/O port. + * @details This function is implemented by writing the GPIO ODR register, the + * implementation has no side effects. + * + * @param[in] port the port identifier + * @param[in] bits the bits to be written on the specified port + * + * @note This function is not meant to be invoked directly by the application + * code. + * @note Writing on pads programmed as pull-up or pull-down has the side + * effect to modify the resistor setting because the output latched data + * is used for the resistor selection. + */ +#define pal_lld_writeport(port, bits) ((port)->ODR = (bits)) + +/** + * @brief Sets a bits mask on a I/O port. + * @details This function is implemented by writing the GPIO BSRR register, the + * implementation has no side effects. + * + * @param[in] port the port identifier + * @param[in] bits the bits to be ORed on the specified port + * + * @note This function is not meant to be invoked directly by the application + * code. + * @note Writing on pads programmed as pull-up or pull-down has the side + * effect to modify the resistor setting because the output latched data + * is used for the resistor selection. + */ +#define pal_lld_setport(port, bits) ((port)->BSRR = (bits)) + +/** + * @brief Clears a bits mask on a I/O port. + * @details This function is implemented by writing the GPIO BRR register, the + * implementation has no side effects. + * + * @param[in] port the port identifier + * @param[in] bits the bits to be cleared on the specified port + * + * @note This function is not meant to be invoked directly by the application + * code. + * @note Writing on pads programmed as pull-up or pull-down has the side + * effect to modify the resistor setting because the output latched data + * is used for the resistor selection. + */ +#define pal_lld_clearport(port, bits) ((port)->BRR = (bits)) + +/** + * @brief Writes a group of bits. + * @details This function is implemented by writing the GPIO BSRR register, the + * implementation has no side effects. + * + * @param[in] port the port identifier + * @param[in] mask the group mask + * @param[in] offset the group bit offset within the port + * @param[in] bits the bits to be written. Values exceeding the group width + * are masked. + * + * @note This function is not meant to be invoked directly by the application + * code. + * @note Writing on pads programmed as pull-up or pull-down has the side + * effect to modify the resistor setting because the output latched data + * is used for the resistor selection. + */ +#define pal_lld_writegroup(port, mask, offset, bits) { \ + (port)->BSRR = ((~(bits) & (mask)) << (16 + (offset))) | \ + (((bits) & (mask)) << (offset)); \ +} + +/** + * @brief Pads group mode setup. + * @details This function programs a pads group belonging to the same port + * with the specified mode. + * + * @param[in] port the port identifier + * @param[in] mask the group mask + * @param[in] mode the mode + * + * @note This function is not meant to be invoked directly by the application + * code. + * @note Writing on pads programmed as pull-up or pull-down has the side + * effect to modify the resistor setting because the output latched data + * is used for the resistor selection. + */ +#define pal_lld_setgroupmode(port, mask, mode) \ + _pal_lld_setgroupmode(port, mask, mode) + +/** + * @brief Writes a logical state on an output pad. + * + * @param[in] port the port identifier + * @param[in] pad the pad number within the port + * @param[out] bit the logical value, the value must be @p 0 or @p 1 + * + * @note This function is not meant to be invoked directly by the application + * code. + * @note Writing on pads programmed as pull-up or pull-down has the side + * effect to modify the resistor setting because the output latched data + * is used for the resistor selection. + */ +#define pal_lld_writepad(port, pad, bit) pal_lld_writegroup(port, 1, pad, bit) + +#ifdef __cplusplus +extern "C" { +#endif + void _pal_lld_init(const STM32GPIOConfig *config); + void _pal_lld_setgroupmode(ioportid_t port, + ioportmask_t mask, + uint_fast8_t mode); +#ifdef __cplusplus +} +#endif + +#endif /* _PAL_LLD_H_ */ + +/** @} */ diff --git a/os/io/platforms/STM32F103/platform.dox b/os/io/platforms/STM32F103/platform.dox new file mode 100644 index 000000000..b1828425c --- /dev/null +++ b/os/io/platforms/STM32F103/platform.dox @@ -0,0 +1,72 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +/** + * @defgroup STM32F103 STM32F103 Support + * @brief STM32F103 specific support. + * @details The STM32F103 support includes: + * - I/O ports driver. + * - Buffered, interrupt driven, serial driver. + * - A demo supporting the kernel test suite. + * . + * @ingroup ARMCM3 + */ + +/** + * @defgroup STM32F103_PAL I/O Ports Support + * @brief I/O Ports peripherals support. + * @details This module supports the STM32F103 GPIO controller. The controller + * supports the following features (see @ref PAL): + * - 16 bits wide ports. + * - Atomic set/reset functions. + * - Atomic set+reset function (atomic bus operations). + * - Output latched regardless of the pad setting. + * - Direct read of input pads regardless of the pad setting. + * . + *

Supported Setup Modes

+ * - @p PAL_MODE_RESET. + * - @p PAL_MODE_UNCONNECTED. + * - @p PAL_MODE_INPUT. + * - @p PAL_MODE_INPUT_PULLUP. + * - @p PAL_MODE_INPUT_PULLDOWN. + * - @p PAL_MODE_OUTPUT_PUSHPULL. + * - @p PAL_MODE_OUTPUT_OPENDRAIN. + * . + * Any attempt to setup an invalid mode is ignored. + * + *

Suboptimal Behavior

+ * Some GPIO features are less than optimal: + * - Pad/port toggling operations are not atomic. + * - Pad/group mode setup is not atomic. + * - Writing on pads/groups/ports programmed as input with pull-up/down + * resistor can change the resistor setting because the output latch is + * used for resistor selection. + * . + * @ingroup STM32F103 + */ + +/** + * @defgroup STM32F103_SERIAL USART Support + * @brief USART peripherals support. + * @details The serial driver supports the STM32F103 USARTs in asynchronous + * mode. + * + * @ingroup STM32F103 + */ + \ No newline at end of file diff --git a/os/io/platforms/STM32F103/serial_lld.c b/os/io/platforms/STM32F103/serial_lld.c new file mode 100644 index 000000000..f671f2be6 --- /dev/null +++ b/os/io/platforms/STM32F103/serial_lld.c @@ -0,0 +1,304 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +/** + * @file STM32F103/serial_lld.c + * @brief STM32F103 low level serial driver code + * @addtogroup STM32F103_SERIAL + * @{ + */ + +#include +#include + +#include "nvic.h" +#include "board.h" + +#if USE_STM32_USART1 || defined(__DOXYGEN__) +/** @brief USART1 serial driver identifier.*/ +SerialDriver COM1; +#endif + +#if USE_STM32_USART2 || defined(__DOXYGEN__) +/** @brief USART2 serial driver identifier.*/ +SerialDriver COM2; +#endif + +#if USE_STM32_USART3 || defined(__DOXYGEN__) +/** @brief USART3 serial driver identifier.*/ +SerialDriver COM3; +#endif + +/** @brief Driver default configuration.*/ +static const SerialDriverConfig default_config = +{ + 38400, + 0, + USART_CR2_STOP1_BITS | USART_CR2_LINEN, + 0 +}; + +/*===========================================================================*/ +/* Low Level Driver local functions. */ +/*===========================================================================*/ + +/** + * @brief USART initialization. + * @details This function must be invoked with interrupts disabled. + * + * @param[in] u pointer to an USART I/O block + * @param[in] config the architecture-dependent serial driver configuration + */ +static void usart_init(USART_TypeDef *u, const SerialDriverConfig* config) { + + /* + * Baud rate setting. + */ + if (u == USART1) + u->BRR = APB2CLK / config->baud_rate; + else + u->BRR = APB1CLK / config->baud_rate; + + /* + * Note that some bits are enforced. + */ + u->CR1 = config->cr1 | USART_CR1_UE | USART_CR1_PEIE | USART_CR1_RXNEIE | + USART_CR1_TE | USART_CR1_RE; + u->CR2 = config->cr2; + u->CR3 = config->cr3 | USART_CR3_EIE; +} + +/** + * @brief USART de-initialization. + * @details This function must be invoked with interrupts disabled. + * + * @param[in] u pointer to an USART I/O block + */ +static void usart_deinit(USART_TypeDef *u) { + + u->CR1 = 0; + u->CR2 = 0; + u->CR3 = 0; +} + +/** + * @brief Error handling routine. + * @param[in] sr USART SR register value + * @param[in] com communication channel associated to the USART + */ +static void set_error(uint16_t sr, SerialDriver *sdp) { + sdflags_t sts = 0; + + if (sr & USART_SR_ORE) + sts |= SD_OVERRUN_ERROR; + if (sr & USART_SR_PE) + sts |= SD_PARITY_ERROR; + if (sr & USART_SR_FE) + sts |= SD_FRAMING_ERROR; + if (sr & USART_SR_LBD) + sts |= SD_BREAK_DETECTED; + chSysLockFromIsr(); + sdAddFlagsI(sdp, sts); + chSysUnlockFromIsr(); +} + +/** + * @brief Common IRQ handler. + * @param[in] u pointer to an USART I/O block + * @param[in] com communication channel associated to the USART + */ +static void serve_interrupt(USART_TypeDef *u, SerialDriver *sdp) { + uint16_t sr = u->SR; + + if (sr & (USART_SR_ORE | USART_SR_FE | USART_SR_PE | USART_SR_LBD)) + set_error(sr, sdp); + if (sr & USART_SR_RXNE) { + chSysLockFromIsr(); + sdIncomingDataI(sdp, u->DR); + chSysUnlockFromIsr(); + } + if (sr & USART_SR_TXE) { + chSysLockFromIsr(); + msg_t b = sdRequestDataI(sdp); + chSysUnlockFromIsr(); + if (b < Q_OK) + u->CR1 &= ~USART_CR1_TXEIE; + else + u->DR = b; + } +} + +#if USE_STM32_USART1 || defined(__DOXYGEN__) +static void notify1(void) { + + USART1->CR1 |= USART_CR1_TXEIE; +} +#endif + +#if USE_STM32_USART2 || defined(__DOXYGEN__) +static void notify2(void) { + + USART2->CR1 |= USART_CR1_TXEIE; +} +#endif + +#if USE_STM32_USART3 || defined(__DOXYGEN__) +static void notify3(void) { + + USART3->CR1 |= USART_CR1_TXEIE; +} +#endif + +/*===========================================================================*/ +/* Low Level Driver interrupt handlers. */ +/*===========================================================================*/ + +#if USE_STM32_USART1 || defined(__DOXYGEN__) +CH_IRQ_HANDLER(VectorD4) { + + CH_IRQ_PROLOGUE(); + + serve_interrupt(USART1, &COM1); + + CH_IRQ_EPILOGUE(); +} +#endif + +#if USE_STM32_USART2 || defined(__DOXYGEN__) +CH_IRQ_HANDLER(VectorD8) { + + CH_IRQ_PROLOGUE(); + + serve_interrupt(USART2, &COM2); + + CH_IRQ_EPILOGUE(); +} +#endif + +#if USE_STM32_USART3 || defined(__DOXYGEN__) +CH_IRQ_HANDLER(VectorDC) { + + CH_IRQ_PROLOGUE(); + + serve_interrupt(USART3, &COM3); + + CH_IRQ_EPILOGUE(); +} +#endif + +/*===========================================================================*/ +/* Low Level Driver exported functions. */ +/*===========================================================================*/ + +/** + * Low level serial driver initialization. + */ +void sd_lld_init(void) { + +#if USE_STM32_USART1 + sdObjectInit(&COM1, NULL, notify1); + GPIOA->CRH = (GPIOA->CRH & 0xFFFFF00F) | 0x000004B0; +#endif + +#if USE_STM32_USART2 + sdObjectInit(&COM2, NULL, notify2); + GPIOA->CRL = (GPIOA->CRL & 0xFFFF00FF) | 0x00004B00; +#endif + +#if USE_STM32_USART3 + sdObjectInit(&COM3, NULL, notify3); + GPIOB->CRH = (GPIOB->CRH & 0xFFFF00FF) | 0x00004B00; +#endif +} + +/** + * @brief Low level serial driver configuration and (re)start. + * + * @param[in] sdp pointer to a @p SerialDriver object + * @param[in] config the architecture-dependent serial driver configuration. + * If this parameter is set to @p NULL then a default + * configuration is used. + */ +void sd_lld_start(SerialDriver *sdp, const SerialDriverConfig *config) { + + if (config == NULL) + config = &default_config; + +#if USE_STM32_USART1 + if (&COM1 == sdp) { + RCC->APB2ENR |= RCC_APB2ENR_USART1EN; + usart_init(USART1, config); + NVICEnableVector(USART1_IRQn, STM32_USART1_PRIORITY); + return; + } +#endif +#if USE_STM32_USART2 + if (&COM2 == sdp) { + RCC->APB1ENR |= RCC_APB1ENR_USART2EN; + usart_init(USART2, config); + NVICEnableVector(USART2_IRQn, STM32_USART2_PRIORITY); + return; + } +#endif +#if USE_STM32_USART3 + if (&COM3 == sdp) { + RCC->APB1ENR |= RCC_APB1ENR_USART3EN; + usart_init(USART3, config); + NVICEnableVector(USART3_IRQn, STM32_USART3_PRIORITY); + return; + } +#endif +} + +/** + * @brief Low level serial driver stop. + * @details De-initializes the USART, stops the associated clock, resets the + * interrupt vector. + * + * @param[in] sdp pointer to a @p SerialDriver object + */ +void sd_lld_stop(SerialDriver *sdp) { + +#if USE_STM32_USART1 + if (&COM1 == sdp) { + usart_deinit(USART1); + RCC->APB2ENR &= ~RCC_APB2ENR_USART1EN; + NVICDisableVector(USART1_IRQn); + return; + } +#endif +#if USE_STM32_USART2 + if (&COM2 == sdp) { + usart_deinit(USART2); + RCC->APB1ENR &= ~RCC_APB1ENR_USART2EN; + NVICDisableVector(USART2_IRQn); + return; + } +#endif +#if USE_STM32_USART3 + if (&COM3 == sdp) { + usart_deinit(USART3); + RCC->APB1ENR &= ~RCC_APB1ENR_USART3EN; + NVICDisableVector(USART3_IRQn); + return; + } +#endif +} + +/** @} */ diff --git a/os/io/platforms/STM32F103/serial_lld.h b/os/io/platforms/STM32F103/serial_lld.h new file mode 100644 index 000000000..daa92c547 --- /dev/null +++ b/os/io/platforms/STM32F103/serial_lld.h @@ -0,0 +1,206 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +/** + * @file STM32F103/serial_lld.h + * @brief STM32F103 low level serial driver header + * @addtogroup STM32F103_SERIAL + * @{ + */ + +#ifndef _SERIAL_LLD_H_ +#define _SERIAL_LLD_H_ + +/* + * Tricks required to make the TRUE/FALSE declaration inside the library + * compatible. + */ +#ifndef __STM32F10x_H +#undef FALSE +#undef TRUE +#include +#define FALSE 0 +#define TRUE (!FALSE) +#endif + +/*===========================================================================*/ +/* Driver pre-compile time settings. */ +/*===========================================================================*/ + +/** + * @brief Serial buffers size setting. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 128 bytes for both the transmission and receive buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 128 +#endif + +/** + * @brief USART1 driver enable switch. + * @details If set to @p TRUE the support for USART1 is included. + * @note The default is @p FALSE. + */ +#if !defined(USE_STM32_USART1) || defined(__DOXYGEN__) +#define USE_STM32_USART1 FALSE +#endif + +/** + * @brief USART2 driver enable switch. + * @details If set to @p TRUE the support for USART2 is included. + * @note The default is @p TRUE. + */ +#if !defined(USE_STM32_USART2) || defined(__DOXYGEN__) +#define USE_STM32_USART2 TRUE +#endif + +/** + * @brief USART3 driver enable switch. + * @details If set to @p TRUE the support for USART3 is included. + * @note The default is @p FALSE. + */ +#if !defined(USE_STM32_USART3) || defined(__DOXYGEN__) +#define USE_STM32_USART3 FALSE +#endif + +/** + * @brief USART1 interrupt priority level setting. + * @note @p BASEPRI_KERNEL >= @p STM32_USART1_PRIORITY > @p PRIORITY_PENDSV. + */ +#if !defined(STM32_USART1_PRIORITY) || defined(__DOXYGEN__) +#define STM32_USART1_PRIORITY 0xC0 +#endif + +/** + * @brief USART2 interrupt priority level setting. + * @note @p BASEPRI_KERNEL >= @p STM32_USART2_PRIORITY > @p PRIORITY_PENDSV. + */ +#if !defined(STM32_USART2_PRIORITY) || defined(__DOXYGEN__) +#define STM32_USART2_PRIORITY 0xC0 +#endif + +/** + * @brief USART3 interrupt priority level setting. + * @note @p BASEPRI_KERNEL >= @p STM32_USART3_PRIORITY > @p PRIORITY_PENDSV. + */ +#if !defined(STM32_USART3_PRIORITY) || defined(__DOXYGEN__) +#define STM32_USART3_PRIORITY 0xC0 +#endif + +/*===========================================================================*/ +/* Driver macros. */ +/*===========================================================================*/ + +/* + * Extra USARTs definitions here (missing from the ST header file). + */ +#define USART_CR2_STOP1_BITS (0 << 12) /**< @brief CR2 1 stop bit value.*/ +#define USART_CR2_STOP0P5_BITS (1 << 12) /**< @brief CR2 0.5 stop bit value.*/ +#define USART_CR2_STOP2_BITS (2 << 12) /**< @brief CR2 2 stop bit value.*/ +#define USART_CR2_STOP1P5_BITS (3 << 12) /**< @brief CR2 1.5 stop bit value.*/ + +/*===========================================================================*/ +/* Driver data structures. */ +/*===========================================================================*/ + +/** + * Serial Driver condition flags type. + */ +typedef uint32_t sdflags_t; + +/** + * @brief @p SerialDriver specific data. + */ +struct _serial_driver_data { + /** + * Input queue, incoming data can be read from this input queue by + * using the queues APIs. + */ + InputQueue iqueue; + /** + * Output queue, outgoing data can be written to this output queue by + * using the queues APIs. + */ + OutputQueue oqueue; + /** + * Status Change @p EventSource. This event is generated when one or more + * condition flags change. + */ + EventSource sevent; + /** + * I/O driver status flags. + */ + sdflags_t flags; + /** + * Input circular buffer. + */ + uint8_t ib[SERIAL_BUFFERS_SIZE]; + /** + * Output circular buffer. + */ + uint8_t ob[SERIAL_BUFFERS_SIZE]; +}; + +/** + * @brief Generic Serial Driver static initializer. + * @details An instance of this structure must be passed to @p sdStart() + * in order to configure and start a serial driver operations. + * + * @note This structure content is architecture dependent, each driver + * implementation defines its own version and the custom static + * initializers. + */ +typedef struct { + + uint32_t baud_rate; + uint16_t cr1; + uint16_t cr2; + uint16_t cr3; +} SerialDriverConfig; + +/*===========================================================================*/ +/* External declarations. */ +/*===========================================================================*/ + +/** @cond never*/ +#if USE_STM32_USART1 +extern SerialDriver COM1; +#endif +#if USE_STM32_USART2 +extern SerialDriver COM2; +#endif +#if USE_STM32_USART3 +extern SerialDriver COM3; +#endif +/** @endcond*/ + +#ifdef __cplusplus +extern "C" { +#endif + void sd_lld_init(void); + void sd_lld_start(SerialDriver *sdp, const SerialDriverConfig *config); + void sd_lld_stop(SerialDriver *sdp); +#ifdef __cplusplus +} +#endif + +#endif /* _SERIAL_LLD_H_ */ + +/** @} */ diff --git a/os/io/platforms/STM32F103/stm32_can.c b/os/io/platforms/STM32F103/stm32_can.c new file mode 100644 index 000000000..d97855a71 --- /dev/null +++ b/os/io/platforms/STM32F103/stm32_can.c @@ -0,0 +1,27 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +/** + * @file STM32F103/stm32_can.c + * @brief STM32 CAN driver code + * @addtogroup STM32F103_CAN + * @{ + */ + +/** @} */ diff --git a/os/io/platforms/STM32F103/stm32_can.h b/os/io/platforms/STM32F103/stm32_can.h new file mode 100644 index 000000000..a124f7cdd --- /dev/null +++ b/os/io/platforms/STM32F103/stm32_can.h @@ -0,0 +1,48 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +/** + * @file STM32F103/stm32_can.h + * @brief STM32 CAN driver header file + * @addtogroup STM32F103_CAN + * @{ + */ + +#ifndef _STM32_CAN_H_ +#define _STM32_CAN_H_ + +typedef struct { +} CANConfig; + +typedef struct { +} CANMessage; + +#ifdef __cplusplus +extern "C" { +#endif + void canInit(CANConfig *config); + bool_t canReceive(CANMessage *canmsg); + bool_t canTransmit(CANMessage *canmsg); +#ifdef __cplusplus +} +#endif + +#endif /* _STM32_CAN_H_ */ + +/** @} */ diff --git a/os/io/platforms/STM32F103/stm32f10x.h b/os/io/platforms/STM32F103/stm32f10x.h new file mode 100644 index 000000000..ec8f6f43e --- /dev/null +++ b/os/io/platforms/STM32F103/stm32f10x.h @@ -0,0 +1,7851 @@ +/** + ****************************************************************************** + * @file stm32f10x.h + * @author MCD Application Team + * @version V3.1.0 + * @date 06/19/2009 + * @brief CMSIS Cortex-M3 Device Peripheral Access Layer Header File. + * This file contains all the peripheral register's definitions, bits + * definitions and memory mapping for STM32F10x Connectivity line, High + * density, Medium density and Low density devices. + ****************************************************************************** + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2009 STMicroelectronics

+ ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f10x + * @{ + */ + +#ifndef __STM32F10x_H +#define __STM32F10x_H + +#ifdef __cplusplus + extern "C" { +#endif + +/** @addtogroup Library_configuration_section + * @{ + */ + +/* Uncomment the line below according to the target STM32 device used in your + application + */ + +#if !defined (STM32F10X_LD) && !defined (STM32F10X_MD) && !defined (STM32F10X_HD) && !defined (STM32F10X_CL) + /* #define STM32F10X_LD */ /*!< STM32F10X_LD: STM32 Low density devices */ + /* #define STM32F10X_MD */ /*!< STM32F10X_MD: STM32 Medium density devices */ + /* #define STM32F10X_HD */ /*!< STM32F10X_HD: STM32 High density devices */ + #define STM32F10X_CL /*!< STM32F10X_CL: STM32 Connectivity line devices */ +#endif +/* Tip: To avoid modifying this file each time you need to switch between these + devices, you can define the device in your toolchain compiler preprocessor. + + - Low density devices are STM32F101xx, STM32F102xx and STM32F103xx microcontrollers + where the Flash memory density ranges between 16 and 32 Kbytes. + - Medium density devices are STM32F101xx, STM32F102xx and STM32F103xx microcontrollers + where the Flash memory density ranges between 64 and 128 Kbytes. + - High density devices are STM32F101xx and STM32F103xx microcontrollers where + the Flash memory density ranges between 256 and 512 Kbytes. + - Connectivity line devices are STM32F105xx and STM32F107xx microcontrollers. + */ + +#if !defined USE_STDPERIPH_DRIVER +/** + * @brief Comment the line below if you will not use the peripherals drivers. + In this case, these drivers will not be included and the application code will + be based on direct access to peripherals registers + */ + /*#define USE_STDPERIPH_DRIVER*/ +#endif + +/** + * @brief In the following line adjust the value of External High Speed oscillator (HSE) + used in your application + + Tip: To avoid modifying this file each time you need to use different HSE, you + can define the HSE value in your toolchain compiler preprocessor. + */ +#if !defined HSE_Value + #ifdef STM32F10X_CL + #define HSE_Value ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */ + #else + #define HSE_Value ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */ + #endif /* STM32F10X_CL */ +#endif /* HSE_Value */ + + +/** + * @brief In the following line adjust the External High Speed oscillator (HSE) Startup + Timeout value + */ +#define HSEStartUp_TimeOut ((uint16_t)0x0500) /*!< Time out for HSE start up */ + +#define HSI_Value ((uint32_t)8000000) /*!< Value of the Internal oscillator in Hz*/ + +/** + * @brief STM32F10x Standard Peripheral Library version number + */ +#define __STM32F10X_STDPERIPH_VERSION_MAIN (0x03) /*!< [31:16] STM32F10x Standard Peripheral Library main version */ +#define __STM32F10X_STDPERIPH_VERSION_SUB1 (0x01) /*!< [15:8] STM32F10x Standard Peripheral Library sub1 version */ +#define __STM32F10X_STDPERIPH_VERSION_SUB2 (0x00) /*!< [7:0] STM32F10x Standard Peripheral Library sub2 version */ +#define __STM32F10X_STDPERIPH_VERSION ((__STM32F10X_STDPERIPH_VERSION_MAIN << 16)\ + | (__STM32F10X_STDPERIPH_VERSION_SUB1 << 8)\ + | __STM32F10X_STDPERIPH_VERSION_SUB2) + +/** + * @} + */ + +/** @addtogroup Configuration_section_for_CMSIS + * @{ + */ + +/** + * @brief Configuration of the Cortex-M3 Processor and Core Peripherals + */ +#define __MPU_PRESENT 0 /*!< STM32 does not provide an MPU */ +#define __NVIC_PRIO_BITS 4 /*!< STM32 uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ + +/** + * @brief STM32F10x Interrupt Number Definition, according to the selected device + * in @ref Library_configuration_section + */ +typedef enum IRQn +{ +/****** Cortex-M3 Processor Exceptions Numbers ***************************************************/ + NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ + MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */ + BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */ + SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */ + SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */ + +/****** STM32 specific Interrupt Numbers *********************************************************/ + WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ + PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ + TAMPER_IRQn = 2, /*!< Tamper Interrupt */ + RTC_IRQn = 3, /*!< RTC global Interrupt */ + FLASH_IRQn = 4, /*!< FLASH global Interrupt */ + RCC_IRQn = 5, /*!< RCC global Interrupt */ + EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ + EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ + EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ + EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ + EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ + DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */ + DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */ + DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */ + DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */ + DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */ + DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */ + DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */ + ADC1_2_IRQn = 18, /*!< ADC1 and ADC2 global Interrupt */ + +#ifdef STM32F10X_LD + USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ + USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ + TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + USBWakeUp_IRQn = 42, /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ +#endif /* STM32F10X_LD */ + +#ifdef STM32F10X_MD + USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ + USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ + TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + USBWakeUp_IRQn = 42, /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ +#endif /* STM32F10X_MD */ + +#ifdef STM32F10X_HD + USB_HP_CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ + USB_LP_CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ + TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + USBWakeUp_IRQn = 42, /*!< USB Device WakeUp from suspend through EXTI Line Interrupt */ + TIM8_BRK_IRQn = 43, /*!< TIM8 Break Interrupt */ + TIM8_UP_IRQn = 44, /*!< TIM8 Update Interrupt */ + TIM8_TRG_COM_IRQn = 45, /*!< TIM8 Trigger and Commutation Interrupt */ + TIM8_CC_IRQn = 46, /*!< TIM8 Capture Compare Interrupt */ + ADC3_IRQn = 47, /*!< ADC3 global Interrupt */ + FSMC_IRQn = 48, /*!< FSMC global Interrupt */ + SDIO_IRQn = 49, /*!< SDIO global Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_IRQn = 54, /*!< TIM6 global Interrupt */ + TIM7_IRQn = 55, /*!< TIM7 global Interrupt */ + DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ + DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ + DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ + DMA2_Channel4_5_IRQn = 59 /*!< DMA2 Channel 4 and Channel 5 global Interrupt */ +#endif /* STM32F10X_HD */ + +#ifdef STM32F10X_CL + CAN1_TX_IRQn = 19, /*!< USB Device High Priority or CAN1 TX Interrupts */ + CAN1_RX0_IRQn = 20, /*!< USB Device Low Priority or CAN1 RX0 Interrupts */ + CAN1_RX1_IRQn = 21, /*!< CAN1 RX1 Interrupt */ + CAN1_SCE_IRQn = 22, /*!< CAN1 SCE Interrupt */ + EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ + TIM1_BRK_IRQn = 24, /*!< TIM1 Break Interrupt */ + TIM1_UP_IRQn = 25, /*!< TIM1 Update Interrupt */ + TIM1_TRG_COM_IRQn = 26, /*!< TIM1 Trigger and Commutation Interrupt */ + TIM1_CC_IRQn = 27, /*!< TIM1 Capture Compare Interrupt */ + TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ + TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ + TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ + I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ + I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ + I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ + I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ + SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ + SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ + USART1_IRQn = 37, /*!< USART1 global Interrupt */ + USART2_IRQn = 38, /*!< USART2 global Interrupt */ + USART3_IRQn = 39, /*!< USART3 global Interrupt */ + EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ + RTCAlarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ + OTG_FS_WKUP_IRQn = 42, /*!< USB OTG FS WakeUp from suspend through EXTI Line Interrupt */ + TIM5_IRQn = 50, /*!< TIM5 global Interrupt */ + SPI3_IRQn = 51, /*!< SPI3 global Interrupt */ + UART4_IRQn = 52, /*!< UART4 global Interrupt */ + UART5_IRQn = 53, /*!< UART5 global Interrupt */ + TIM6_IRQn = 54, /*!< TIM6 global Interrupt */ + TIM7_IRQn = 55, /*!< TIM7 global Interrupt */ + DMA2_Channel1_IRQn = 56, /*!< DMA2 Channel 1 global Interrupt */ + DMA2_Channel2_IRQn = 57, /*!< DMA2 Channel 2 global Interrupt */ + DMA2_Channel3_IRQn = 58, /*!< DMA2 Channel 3 global Interrupt */ + DMA2_Channel4_IRQn = 59, /*!< DMA2 Channel 4 global Interrupt */ + DMA2_Channel5_IRQn = 60, /*!< DMA2 Channel 5 global Interrupt */ + ETH_IRQn = 61, /*!< Ethernet global Interrupt */ + ETH_WKUP_IRQn = 62, /*!< Ethernet Wakeup through EXTI line Interrupt */ + CAN2_TX_IRQn = 63, /*!< CAN2 TX Interrupt */ + CAN2_RX0_IRQn = 64, /*!< CAN2 RX0 Interrupt */ + CAN2_RX1_IRQn = 65, /*!< CAN2 RX1 Interrupt */ + CAN2_SCE_IRQn = 66, /*!< CAN2 SCE Interrupt */ + OTG_FS_IRQn = 67 /*!< USB OTG FS global Interrupt */ +#endif /* STM32F10X_CL */ +} IRQn_Type; + +/** + * @} + */ + +#include "core_cm3.h" +//#include "system_stm32f10x.h" +#include + +/** @addtogroup Exported_types + * @{ + */ + +/*!< STM32F10x Standard Peripheral Library old types (maintained for legacy purpose) */ +typedef int32_t s32; +typedef int16_t s16; +typedef int8_t s8; + +typedef const int32_t sc32; /*!< Read Only */ +typedef const int16_t sc16; /*!< Read Only */ +typedef const int8_t sc8; /*!< Read Only */ + +typedef __IO int32_t vs32; +typedef __IO int16_t vs16; +typedef __IO int8_t vs8; + +typedef __I int32_t vsc32; /*!< Read Only */ +typedef __I int16_t vsc16; /*!< Read Only */ +typedef __I int8_t vsc8; /*!< Read Only */ + +typedef uint32_t u32; +typedef uint16_t u16; +typedef uint8_t u8; + +typedef const uint32_t uc32; /*!< Read Only */ +typedef const uint16_t uc16; /*!< Read Only */ +typedef const uint8_t uc8; /*!< Read Only */ + +typedef __IO uint32_t vu32; +typedef __IO uint16_t vu16; +typedef __IO uint8_t vu8; + +typedef __I uint32_t vuc32; /*!< Read Only */ +typedef __I uint16_t vuc16; /*!< Read Only */ +typedef __I uint8_t vuc8; /*!< Read Only */ + +#ifndef __cplusplus +typedef enum {FALSE = 0, TRUE = !FALSE} bool; +#endif + +typedef enum {RESET = 0, SET = !RESET} FlagStatus, ITStatus; + +typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState; +#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) + +typedef enum {ERROR = 0, SUCCESS = !ERROR} ErrorStatus; + +/** + * @} + */ + +/** @addtogroup Peripheral_registers_structures + * @{ + */ + +/** + * @brief Analog to Digital Converter + */ + +typedef struct +{ + __IO uint32_t SR; + __IO uint32_t CR1; + __IO uint32_t CR2; + __IO uint32_t SMPR1; + __IO uint32_t SMPR2; + __IO uint32_t JOFR1; + __IO uint32_t JOFR2; + __IO uint32_t JOFR3; + __IO uint32_t JOFR4; + __IO uint32_t HTR; + __IO uint32_t LTR; + __IO uint32_t SQR1; + __IO uint32_t SQR2; + __IO uint32_t SQR3; + __IO uint32_t JSQR; + __IO uint32_t JDR1; + __IO uint32_t JDR2; + __IO uint32_t JDR3; + __IO uint32_t JDR4; + __IO uint32_t DR; +} ADC_TypeDef; + +/** + * @brief Backup Registers + */ + +typedef struct +{ + uint32_t RESERVED0; + __IO uint16_t DR1; + uint16_t RESERVED1; + __IO uint16_t DR2; + uint16_t RESERVED2; + __IO uint16_t DR3; + uint16_t RESERVED3; + __IO uint16_t DR4; + uint16_t RESERVED4; + __IO uint16_t DR5; + uint16_t RESERVED5; + __IO uint16_t DR6; + uint16_t RESERVED6; + __IO uint16_t DR7; + uint16_t RESERVED7; + __IO uint16_t DR8; + uint16_t RESERVED8; + __IO uint16_t DR9; + uint16_t RESERVED9; + __IO uint16_t DR10; + uint16_t RESERVED10; + __IO uint16_t RTCCR; + uint16_t RESERVED11; + __IO uint16_t CR; + uint16_t RESERVED12; + __IO uint16_t CSR; + uint16_t RESERVED13[5]; + __IO uint16_t DR11; + uint16_t RESERVED14; + __IO uint16_t DR12; + uint16_t RESERVED15; + __IO uint16_t DR13; + uint16_t RESERVED16; + __IO uint16_t DR14; + uint16_t RESERVED17; + __IO uint16_t DR15; + uint16_t RESERVED18; + __IO uint16_t DR16; + uint16_t RESERVED19; + __IO uint16_t DR17; + uint16_t RESERVED20; + __IO uint16_t DR18; + uint16_t RESERVED21; + __IO uint16_t DR19; + uint16_t RESERVED22; + __IO uint16_t DR20; + uint16_t RESERVED23; + __IO uint16_t DR21; + uint16_t RESERVED24; + __IO uint16_t DR22; + uint16_t RESERVED25; + __IO uint16_t DR23; + uint16_t RESERVED26; + __IO uint16_t DR24; + uint16_t RESERVED27; + __IO uint16_t DR25; + uint16_t RESERVED28; + __IO uint16_t DR26; + uint16_t RESERVED29; + __IO uint16_t DR27; + uint16_t RESERVED30; + __IO uint16_t DR28; + uint16_t RESERVED31; + __IO uint16_t DR29; + uint16_t RESERVED32; + __IO uint16_t DR30; + uint16_t RESERVED33; + __IO uint16_t DR31; + uint16_t RESERVED34; + __IO uint16_t DR32; + uint16_t RESERVED35; + __IO uint16_t DR33; + uint16_t RESERVED36; + __IO uint16_t DR34; + uint16_t RESERVED37; + __IO uint16_t DR35; + uint16_t RESERVED38; + __IO uint16_t DR36; + uint16_t RESERVED39; + __IO uint16_t DR37; + uint16_t RESERVED40; + __IO uint16_t DR38; + uint16_t RESERVED41; + __IO uint16_t DR39; + uint16_t RESERVED42; + __IO uint16_t DR40; + uint16_t RESERVED43; + __IO uint16_t DR41; + uint16_t RESERVED44; + __IO uint16_t DR42; + uint16_t RESERVED45; +} BKP_TypeDef; + +/** + * @brief Controller Area Network TxMailBox + */ + +typedef struct +{ + __IO uint32_t TIR; + __IO uint32_t TDTR; + __IO uint32_t TDLR; + __IO uint32_t TDHR; +} CAN_TxMailBox_TypeDef; + +/** + * @brief Controller Area Network FIFOMailBox + */ + +typedef struct +{ + __IO uint32_t RIR; + __IO uint32_t RDTR; + __IO uint32_t RDLR; + __IO uint32_t RDHR; +} CAN_FIFOMailBox_TypeDef; + +/** + * @brief Controller Area Network FilterRegister + */ + +typedef struct +{ + __IO uint32_t FR1; + __IO uint32_t FR2; +} CAN_FilterRegister_TypeDef; + +/** + * @brief Controller Area Network + */ + +typedef struct +{ + __IO uint32_t MCR; + __IO uint32_t MSR; + __IO uint32_t TSR; + __IO uint32_t RF0R; + __IO uint32_t RF1R; + __IO uint32_t IER; + __IO uint32_t ESR; + __IO uint32_t BTR; + uint32_t RESERVED0[88]; + CAN_TxMailBox_TypeDef sTxMailBox[3]; + CAN_FIFOMailBox_TypeDef sFIFOMailBox[2]; + uint32_t RESERVED1[12]; + __IO uint32_t FMR; + __IO uint32_t FM1R; + uint32_t RESERVED2; + __IO uint32_t FS1R; + uint32_t RESERVED3; + __IO uint32_t FFA1R; + uint32_t RESERVED4; + __IO uint32_t FA1R; + uint32_t RESERVED5[8]; +#ifndef STM32F10X_CL + CAN_FilterRegister_TypeDef sFilterRegister[14]; +#else + CAN_FilterRegister_TypeDef sFilterRegister[28]; +#endif /* STM32F10X_CL */ +} CAN_TypeDef; + +/** + * @brief CRC calculation unit + */ + +typedef struct +{ + __IO uint32_t DR; + __IO uint8_t IDR; + uint8_t RESERVED0; + uint16_t RESERVED1; + __IO uint32_t CR; +} CRC_TypeDef; + +/** + * @brief Digital to Analog Converter + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t SWTRIGR; + __IO uint32_t DHR12R1; + __IO uint32_t DHR12L1; + __IO uint32_t DHR8R1; + __IO uint32_t DHR12R2; + __IO uint32_t DHR12L2; + __IO uint32_t DHR8R2; + __IO uint32_t DHR12RD; + __IO uint32_t DHR12LD; + __IO uint32_t DHR8RD; + __IO uint32_t DOR1; + __IO uint32_t DOR2; +} DAC_TypeDef; + +/** + * @brief Debug MCU + */ + +typedef struct +{ + __IO uint32_t IDCODE; + __IO uint32_t CR; +}DBGMCU_TypeDef; + +/** + * @brief DMA Controller + */ + +typedef struct +{ + __IO uint32_t CCR; + __IO uint32_t CNDTR; + __IO uint32_t CPAR; + __IO uint32_t CMAR; +} DMA_Channel_TypeDef; + +typedef struct +{ + __IO uint32_t ISR; + __IO uint32_t IFCR; +} DMA_TypeDef; + +/** + * @brief Ethernet MAC + */ + +typedef struct +{ + __IO uint32_t MACCR; + __IO uint32_t MACFFR; + __IO uint32_t MACHTHR; + __IO uint32_t MACHTLR; + __IO uint32_t MACMIIAR; + __IO uint32_t MACMIIDR; + __IO uint32_t MACFCR; + __IO uint32_t MACVLANTR; /* 8 */ + uint32_t RESERVED0[2]; + __IO uint32_t MACRWUFFR; /* 11 */ + __IO uint32_t MACPMTCSR; + uint32_t RESERVED1[2]; + __IO uint32_t MACSR; /* 15 */ + __IO uint32_t MACIMR; + __IO uint32_t MACA0HR; + __IO uint32_t MACA0LR; + __IO uint32_t MACA1HR; + __IO uint32_t MACA1LR; + __IO uint32_t MACA2HR; + __IO uint32_t MACA2LR; + __IO uint32_t MACA3HR; + __IO uint32_t MACA3LR; /* 24 */ + uint32_t RESERVED2[40]; + __IO uint32_t MMCCR; /* 65 */ + __IO uint32_t MMCRIR; + __IO uint32_t MMCTIR; + __IO uint32_t MMCRIMR; + __IO uint32_t MMCTIMR; /* 69 */ + uint32_t RESERVED3[14]; + __IO uint32_t MMCTGFSCCR; /* 84 */ + __IO uint32_t MMCTGFMSCCR; + uint32_t RESERVED4[5]; + __IO uint32_t MMCTGFCR; + uint32_t RESERVED5[10]; + __IO uint32_t MMCRFCECR; + __IO uint32_t MMCRFAECR; + uint32_t RESERVED6[10]; + __IO uint32_t MMCRGUFCR; + uint32_t RESERVED7[334]; + __IO uint32_t PTPTSCR; + __IO uint32_t PTPSSIR; + __IO uint32_t PTPTSHR; + __IO uint32_t PTPTSLR; + __IO uint32_t PTPTSHUR; + __IO uint32_t PTPTSLUR; + __IO uint32_t PTPTSAR; + __IO uint32_t PTPTTHR; + __IO uint32_t PTPTTLR; + uint32_t RESERVED8[567]; + __IO uint32_t DMABMR; + __IO uint32_t DMATPDR; + __IO uint32_t DMARPDR; + __IO uint32_t DMARDLAR; + __IO uint32_t DMATDLAR; + __IO uint32_t DMASR; + __IO uint32_t DMAOMR; + __IO uint32_t DMAIER; + __IO uint32_t DMAMFBOCR; + uint32_t RESERVED9[9]; + __IO uint32_t DMACHTDR; + __IO uint32_t DMACHRDR; + __IO uint32_t DMACHTBAR; + __IO uint32_t DMACHRBAR; +} ETH_TypeDef; + +/** + * @brief External Interrupt/Event Controller + */ + +typedef struct +{ + __IO uint32_t IMR; + __IO uint32_t EMR; + __IO uint32_t RTSR; + __IO uint32_t FTSR; + __IO uint32_t SWIER; + __IO uint32_t PR; +} EXTI_TypeDef; + +/** + * @brief FLASH Registers + */ + +typedef struct +{ + __IO uint32_t ACR; + __IO uint32_t KEYR; + __IO uint32_t OPTKEYR; + __IO uint32_t SR; + __IO uint32_t CR; + __IO uint32_t AR; + __IO uint32_t RESERVED; + __IO uint32_t OBR; + __IO uint32_t WRPR; +} FLASH_TypeDef; + +/** + * @brief Option Bytes Registers + */ + +typedef struct +{ + __IO uint16_t RDP; + __IO uint16_t USER; + __IO uint16_t Data0; + __IO uint16_t Data1; + __IO uint16_t WRP0; + __IO uint16_t WRP1; + __IO uint16_t WRP2; + __IO uint16_t WRP3; +} OB_TypeDef; + +/** + * @brief Flexible Static Memory Controller + */ + +typedef struct +{ + __IO uint32_t BTCR[8]; +} FSMC_Bank1_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank1E + */ + +typedef struct +{ + __IO uint32_t BWTR[7]; +} FSMC_Bank1E_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank2 + */ + +typedef struct +{ + __IO uint32_t PCR2; + __IO uint32_t SR2; + __IO uint32_t PMEM2; + __IO uint32_t PATT2; + uint32_t RESERVED0; + __IO uint32_t ECCR2; +} FSMC_Bank2_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank3 + */ + +typedef struct +{ + __IO uint32_t PCR3; + __IO uint32_t SR3; + __IO uint32_t PMEM3; + __IO uint32_t PATT3; + uint32_t RESERVED0; + __IO uint32_t ECCR3; +} FSMC_Bank3_TypeDef; + +/** + * @brief Flexible Static Memory Controller Bank4 + */ + +typedef struct +{ + __IO uint32_t PCR4; + __IO uint32_t SR4; + __IO uint32_t PMEM4; + __IO uint32_t PATT4; + __IO uint32_t PIO4; +} FSMC_Bank4_TypeDef; + +/** + * @brief General Purpose I/O + */ + +typedef struct +{ + __IO uint32_t CRL; + __IO uint32_t CRH; + __IO uint32_t IDR; + __IO uint32_t ODR; + __IO uint32_t BSRR; + __IO uint32_t BRR; + __IO uint32_t LCKR; +} GPIO_TypeDef; + +/** + * @brief Alternate Function I/O + */ + +typedef struct +{ + __IO uint32_t EVCR; + __IO uint32_t MAPR; + __IO uint32_t EXTICR[4]; +} AFIO_TypeDef; +/** + * @brief Inter-integrated Circuit Interface + */ + +typedef struct +{ + __IO uint16_t CR1; + uint16_t RESERVED0; + __IO uint16_t CR2; + uint16_t RESERVED1; + __IO uint16_t OAR1; + uint16_t RESERVED2; + __IO uint16_t OAR2; + uint16_t RESERVED3; + __IO uint16_t DR; + uint16_t RESERVED4; + __IO uint16_t SR1; + uint16_t RESERVED5; + __IO uint16_t SR2; + uint16_t RESERVED6; + __IO uint16_t CCR; + uint16_t RESERVED7; + __IO uint16_t TRISE; + uint16_t RESERVED8; +} I2C_TypeDef; + +/** + * @brief Independent WATCHDOG + */ + +typedef struct +{ + __IO uint32_t KR; + __IO uint32_t PR; + __IO uint32_t RLR; + __IO uint32_t SR; +} IWDG_TypeDef; + +/** + * @brief Power Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CSR; +} PWR_TypeDef; + +/** + * @brief Reset and Clock Control + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CFGR; + __IO uint32_t CIR; + __IO uint32_t APB2RSTR; + __IO uint32_t APB1RSTR; + __IO uint32_t AHBENR; + __IO uint32_t APB2ENR; + __IO uint32_t APB1ENR; + __IO uint32_t BDCR; + __IO uint32_t CSR; +#ifdef STM32F10X_CL + __IO uint32_t AHBRSTR; + __IO uint32_t CFGR2; +#endif /* STM32F10X_CL */ +} RCC_TypeDef; + +/** + * @brief Real-Time Clock + */ + +typedef struct +{ + __IO uint16_t CRH; + uint16_t RESERVED0; + __IO uint16_t CRL; + uint16_t RESERVED1; + __IO uint16_t PRLH; + uint16_t RESERVED2; + __IO uint16_t PRLL; + uint16_t RESERVED3; + __IO uint16_t DIVH; + uint16_t RESERVED4; + __IO uint16_t DIVL; + uint16_t RESERVED5; + __IO uint16_t CNTH; + uint16_t RESERVED6; + __IO uint16_t CNTL; + uint16_t RESERVED7; + __IO uint16_t ALRH; + uint16_t RESERVED8; + __IO uint16_t ALRL; + uint16_t RESERVED9; +} RTC_TypeDef; + +/** + * @brief SD host Interface + */ + +typedef struct +{ + __IO uint32_t POWER; + __IO uint32_t CLKCR; + __IO uint32_t ARG; + __IO uint32_t CMD; + __I uint32_t RESPCMD; + __I uint32_t RESP1; + __I uint32_t RESP2; + __I uint32_t RESP3; + __I uint32_t RESP4; + __IO uint32_t DTIMER; + __IO uint32_t DLEN; + __IO uint32_t DCTRL; + __I uint32_t DCOUNT; + __I uint32_t STA; + __IO uint32_t ICR; + __IO uint32_t MASK; + uint32_t RESERVED0[2]; + __I uint32_t FIFOCNT; + uint32_t RESERVED1[13]; + __IO uint32_t FIFO; +} SDIO_TypeDef; + +/** + * @brief Serial Peripheral Interface + */ + +typedef struct +{ + __IO uint16_t CR1; + uint16_t RESERVED0; + __IO uint16_t CR2; + uint16_t RESERVED1; + __IO uint16_t SR; + uint16_t RESERVED2; + __IO uint16_t DR; + uint16_t RESERVED3; + __IO uint16_t CRCPR; + uint16_t RESERVED4; + __IO uint16_t RXCRCR; + uint16_t RESERVED5; + __IO uint16_t TXCRCR; + uint16_t RESERVED6; + __IO uint16_t I2SCFGR; + uint16_t RESERVED7; + __IO uint16_t I2SPR; + uint16_t RESERVED8; +} SPI_TypeDef; + +/** + * @brief TIM + */ + +typedef struct +{ + __IO uint16_t CR1; + uint16_t RESERVED0; + __IO uint16_t CR2; + uint16_t RESERVED1; + __IO uint16_t SMCR; + uint16_t RESERVED2; + __IO uint16_t DIER; + uint16_t RESERVED3; + __IO uint16_t SR; + uint16_t RESERVED4; + __IO uint16_t EGR; + uint16_t RESERVED5; + __IO uint16_t CCMR1; + uint16_t RESERVED6; + __IO uint16_t CCMR2; + uint16_t RESERVED7; + __IO uint16_t CCER; + uint16_t RESERVED8; + __IO uint16_t CNT; + uint16_t RESERVED9; + __IO uint16_t PSC; + uint16_t RESERVED10; + __IO uint16_t ARR; + uint16_t RESERVED11; + __IO uint16_t RCR; + uint16_t RESERVED12; + __IO uint16_t CCR1; + uint16_t RESERVED13; + __IO uint16_t CCR2; + uint16_t RESERVED14; + __IO uint16_t CCR3; + uint16_t RESERVED15; + __IO uint16_t CCR4; + uint16_t RESERVED16; + __IO uint16_t BDTR; + uint16_t RESERVED17; + __IO uint16_t DCR; + uint16_t RESERVED18; + __IO uint16_t DMAR; + uint16_t RESERVED19; +} TIM_TypeDef; + +/** + * @brief Universal Synchronous Asynchronous Receiver Transmitter + */ + +typedef struct +{ + __IO uint16_t SR; + uint16_t RESERVED0; + __IO uint16_t DR; + uint16_t RESERVED1; + __IO uint16_t BRR; + uint16_t RESERVED2; + __IO uint16_t CR1; + uint16_t RESERVED3; + __IO uint16_t CR2; + uint16_t RESERVED4; + __IO uint16_t CR3; + uint16_t RESERVED5; + __IO uint16_t GTPR; + uint16_t RESERVED6; +} USART_TypeDef; + +/** + * @brief Window WATCHDOG + */ + +typedef struct +{ + __IO uint32_t CR; + __IO uint32_t CFR; + __IO uint32_t SR; +} WWDG_TypeDef; + +/** + * @} + */ + +/** @addtogroup Peripheral_memory_map + * @{ + */ + +#define PERIPH_BB_BASE ((uint32_t)0x42000000) /*!< Peripheral base address in the alias region */ +#define SRAM_BB_BASE ((uint32_t)0x22000000) /*!< SRAM base address in the alias region */ + +#define SRAM_BASE ((uint32_t)0x20000000) /*!< Peripheral base address in the bit-band region */ +#define PERIPH_BASE ((uint32_t)0x40000000) /*!< SRAM base address in the bit-band region */ + +#define FSMC_R_BASE ((uint32_t)0xA0000000) /*!< FSMC registers base address */ + +/*!< Peripheral memory map */ +#define APB1PERIPH_BASE PERIPH_BASE +#define APB2PERIPH_BASE (PERIPH_BASE + 0x10000) +#define AHBPERIPH_BASE (PERIPH_BASE + 0x20000) + +#define TIM2_BASE (APB1PERIPH_BASE + 0x0000) +#define TIM3_BASE (APB1PERIPH_BASE + 0x0400) +#define TIM4_BASE (APB1PERIPH_BASE + 0x0800) +#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00) +#define TIM6_BASE (APB1PERIPH_BASE + 0x1000) +#define TIM7_BASE (APB1PERIPH_BASE + 0x1400) +#define RTC_BASE (APB1PERIPH_BASE + 0x2800) +#define WWDG_BASE (APB1PERIPH_BASE + 0x2C00) +#define IWDG_BASE (APB1PERIPH_BASE + 0x3000) +#define SPI2_BASE (APB1PERIPH_BASE + 0x3800) +#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00) +#define USART2_BASE (APB1PERIPH_BASE + 0x4400) +#define USART3_BASE (APB1PERIPH_BASE + 0x4800) +#define UART4_BASE (APB1PERIPH_BASE + 0x4C00) +#define UART5_BASE (APB1PERIPH_BASE + 0x5000) +#define I2C1_BASE (APB1PERIPH_BASE + 0x5400) +#define I2C2_BASE (APB1PERIPH_BASE + 0x5800) +#define CAN1_BASE (APB1PERIPH_BASE + 0x6400) +#define CAN2_BASE (APB1PERIPH_BASE + 0x6800) +#define BKP_BASE (APB1PERIPH_BASE + 0x6C00) +#define PWR_BASE (APB1PERIPH_BASE + 0x7000) +#define DAC_BASE (APB1PERIPH_BASE + 0x7400) + +#define AFIO_BASE (APB2PERIPH_BASE + 0x0000) +#define EXTI_BASE (APB2PERIPH_BASE + 0x0400) +#define GPIOA_BASE (APB2PERIPH_BASE + 0x0800) +#define GPIOB_BASE (APB2PERIPH_BASE + 0x0C00) +#define GPIOC_BASE (APB2PERIPH_BASE + 0x1000) +#define GPIOD_BASE (APB2PERIPH_BASE + 0x1400) +#define GPIOE_BASE (APB2PERIPH_BASE + 0x1800) +#define GPIOF_BASE (APB2PERIPH_BASE + 0x1C00) +#define GPIOG_BASE (APB2PERIPH_BASE + 0x2000) +#define ADC1_BASE (APB2PERIPH_BASE + 0x2400) +#define ADC2_BASE (APB2PERIPH_BASE + 0x2800) +#define TIM1_BASE (APB2PERIPH_BASE + 0x2C00) +#define SPI1_BASE (APB2PERIPH_BASE + 0x3000) +#define TIM8_BASE (APB2PERIPH_BASE + 0x3400) +#define USART1_BASE (APB2PERIPH_BASE + 0x3800) +#define ADC3_BASE (APB2PERIPH_BASE + 0x3C00) + +#define SDIO_BASE (PERIPH_BASE + 0x18000) + +#define DMA1_BASE (AHBPERIPH_BASE + 0x0000) +#define DMA1_Channel1_BASE (AHBPERIPH_BASE + 0x0008) +#define DMA1_Channel2_BASE (AHBPERIPH_BASE + 0x001C) +#define DMA1_Channel3_BASE (AHBPERIPH_BASE + 0x0030) +#define DMA1_Channel4_BASE (AHBPERIPH_BASE + 0x0044) +#define DMA1_Channel5_BASE (AHBPERIPH_BASE + 0x0058) +#define DMA1_Channel6_BASE (AHBPERIPH_BASE + 0x006C) +#define DMA1_Channel7_BASE (AHBPERIPH_BASE + 0x0080) +#define DMA2_BASE (AHBPERIPH_BASE + 0x0400) +#define DMA2_Channel1_BASE (AHBPERIPH_BASE + 0x0408) +#define DMA2_Channel2_BASE (AHBPERIPH_BASE + 0x041C) +#define DMA2_Channel3_BASE (AHBPERIPH_BASE + 0x0430) +#define DMA2_Channel4_BASE (AHBPERIPH_BASE + 0x0444) +#define DMA2_Channel5_BASE (AHBPERIPH_BASE + 0x0458) +#define RCC_BASE (AHBPERIPH_BASE + 0x1000) +#define CRC_BASE (AHBPERIPH_BASE + 0x3000) + +#define FLASH_R_BASE (AHBPERIPH_BASE + 0x2000) /*!< Flash registers base address */ +#define OB_BASE ((uint32_t)0x1FFFF800) /*!< Flash Option Bytes base address */ + +#define ETH_BASE (AHBPERIPH_BASE + 0x8000) +#define ETH_MAC_BASE (ETH_BASE) +#define ETH_MMC_BASE (ETH_BASE + 0x0100) +#define ETH_PTP_BASE (ETH_BASE + 0x0700) +#define ETH_DMA_BASE (ETH_BASE + 0x1000) + +#define FSMC_Bank1_R_BASE (FSMC_R_BASE + 0x0000) /*!< FSMC Bank1 registers base address */ +#define FSMC_Bank1E_R_BASE (FSMC_R_BASE + 0x0104) /*!< FSMC Bank1E registers base address */ +#define FSMC_Bank2_R_BASE (FSMC_R_BASE + 0x0060) /*!< FSMC Bank2 registers base address */ +#define FSMC_Bank3_R_BASE (FSMC_R_BASE + 0x0080) /*!< FSMC Bank3 registers base address */ +#define FSMC_Bank4_R_BASE (FSMC_R_BASE + 0x00A0) /*!< FSMC Bank4 registers base address */ + +#define DBGMCU_BASE ((uint32_t)0xE0042000) /*!< Debug MCU registers base address */ + +/** + * @} + */ + +/** @addtogroup Peripheral_declaration + * @{ + */ + +#define TIM2 ((TIM_TypeDef *) TIM2_BASE) +#define TIM3 ((TIM_TypeDef *) TIM3_BASE) +#define TIM4 ((TIM_TypeDef *) TIM4_BASE) +#define TIM5 ((TIM_TypeDef *) TIM5_BASE) +#define TIM6 ((TIM_TypeDef *) TIM6_BASE) +#define TIM7 ((TIM_TypeDef *) TIM7_BASE) +#define RTC ((RTC_TypeDef *) RTC_BASE) +#define WWDG ((WWDG_TypeDef *) WWDG_BASE) +#define IWDG ((IWDG_TypeDef *) IWDG_BASE) +#define SPI2 ((SPI_TypeDef *) SPI2_BASE) +#define SPI3 ((SPI_TypeDef *) SPI3_BASE) +#define USART2 ((USART_TypeDef *) USART2_BASE) +#define USART3 ((USART_TypeDef *) USART3_BASE) +#define UART4 ((USART_TypeDef *) UART4_BASE) +#define UART5 ((USART_TypeDef *) UART5_BASE) +#define I2C1 ((I2C_TypeDef *) I2C1_BASE) +#define I2C2 ((I2C_TypeDef *) I2C2_BASE) +#define CAN1 ((CAN_TypeDef *) CAN1_BASE) +#define CAN2 ((CAN_TypeDef *) CAN2_BASE) +#define BKP ((BKP_TypeDef *) BKP_BASE) +#define PWR ((PWR_TypeDef *) PWR_BASE) +#define DAC ((DAC_TypeDef *) DAC_BASE) +#define AFIO ((AFIO_TypeDef *) AFIO_BASE) +#define EXTI ((EXTI_TypeDef *) EXTI_BASE) +#define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) +#define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) +#define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) +#define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) +#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) +#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) +#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE) +#define ADC1 ((ADC_TypeDef *) ADC1_BASE) +#define ADC2 ((ADC_TypeDef *) ADC2_BASE) +#define TIM1 ((TIM_TypeDef *) TIM1_BASE) +#define SPI1 ((SPI_TypeDef *) SPI1_BASE) +#define TIM8 ((TIM_TypeDef *) TIM8_BASE) +#define USART1 ((USART_TypeDef *) USART1_BASE) +#define ADC3 ((ADC_TypeDef *) ADC3_BASE) +#define SDIO ((SDIO_TypeDef *) SDIO_BASE) +#define DMA1 ((DMA_TypeDef *) DMA1_BASE) +#define DMA2 ((DMA_TypeDef *) DMA2_BASE) +#define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) +#define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) +#define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) +#define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE) +#define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE) +#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE) +#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE) +#define DMA2_Channel1 ((DMA_Channel_TypeDef *) DMA2_Channel1_BASE) +#define DMA2_Channel2 ((DMA_Channel_TypeDef *) DMA2_Channel2_BASE) +#define DMA2_Channel3 ((DMA_Channel_TypeDef *) DMA2_Channel3_BASE) +#define DMA2_Channel4 ((DMA_Channel_TypeDef *) DMA2_Channel4_BASE) +#define DMA2_Channel5 ((DMA_Channel_TypeDef *) DMA2_Channel5_BASE) +#define RCC ((RCC_TypeDef *) RCC_BASE) +#define CRC ((CRC_TypeDef *) CRC_BASE) +#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) +#define OB ((OB_TypeDef *) OB_BASE) +#define ETH ((ETH_TypeDef *) ETH_BASE) +#define FSMC_Bank1 ((FSMC_Bank1_TypeDef *) FSMC_Bank1_R_BASE) +#define FSMC_Bank1E ((FSMC_Bank1E_TypeDef *) FSMC_Bank1E_R_BASE) +#define FSMC_Bank2 ((FSMC_Bank2_TypeDef *) FSMC_Bank2_R_BASE) +#define FSMC_Bank3 ((FSMC_Bank3_TypeDef *) FSMC_Bank3_R_BASE) +#define FSMC_Bank4 ((FSMC_Bank4_TypeDef *) FSMC_Bank4_R_BASE) +#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) + +/** + * @} + */ + +/** @addtogroup Exported_constants + * @{ + */ + + /** @addtogroup Peripheral_Registers_Bits_Definition + * @{ + */ + +/******************************************************************************/ +/* Peripheral Registers_Bits_Definition */ +/******************************************************************************/ + +/******************************************************************************/ +/* */ +/* CRC calculation unit */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for CRC_DR register *********************/ +#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */ + + +/******************* Bit definition for CRC_IDR register ********************/ +#define CRC_IDR_IDR ((uint8_t)0xFF) /*!< General-purpose 8-bit data register bits */ + + +/******************** Bit definition for CRC_CR register ********************/ +#define CRC_CR_RESET ((uint8_t)0x01) /*!< RESET bit */ + +/******************************************************************************/ +/* */ +/* Power Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for PWR_CR register ********************/ +#define PWR_CR_LPDS ((uint16_t)0x0001) /*!< Low-Power Deepsleep */ +#define PWR_CR_PDDS ((uint16_t)0x0002) /*!< Power Down Deepsleep */ +#define PWR_CR_CWUF ((uint16_t)0x0004) /*!< Clear Wakeup Flag */ +#define PWR_CR_CSBF ((uint16_t)0x0008) /*!< Clear Standby Flag */ +#define PWR_CR_PVDE ((uint16_t)0x0010) /*!< Power Voltage Detector Enable */ + +#define PWR_CR_PLS ((uint16_t)0x00E0) /*!< PLS[2:0] bits (PVD Level Selection) */ +#define PWR_CR_PLS_0 ((uint16_t)0x0020) /*!< Bit 0 */ +#define PWR_CR_PLS_1 ((uint16_t)0x0040) /*!< Bit 1 */ +#define PWR_CR_PLS_2 ((uint16_t)0x0080) /*!< Bit 2 */ + +/*!< PVD level configuration */ +#define PWR_CR_PLS_2V2 ((uint16_t)0x0000) /*!< PVD level 2.2V */ +#define PWR_CR_PLS_2V3 ((uint16_t)0x0020) /*!< PVD level 2.3V */ +#define PWR_CR_PLS_2V4 ((uint16_t)0x0040) /*!< PVD level 2.4V */ +#define PWR_CR_PLS_2V5 ((uint16_t)0x0060) /*!< PVD level 2.5V */ +#define PWR_CR_PLS_2V6 ((uint16_t)0x0080) /*!< PVD level 2.6V */ +#define PWR_CR_PLS_2V7 ((uint16_t)0x00A0) /*!< PVD level 2.7V */ +#define PWR_CR_PLS_2V8 ((uint16_t)0x00C0) /*!< PVD level 2.8V */ +#define PWR_CR_PLS_2V9 ((uint16_t)0x00E0) /*!< PVD level 2.9V */ + +#define PWR_CR_DBP ((uint16_t)0x0100) /*!< Disable Backup Domain write protection */ + + +/******************* Bit definition for PWR_CSR register ********************/ +#define PWR_CSR_WUF ((uint16_t)0x0001) /*!< Wakeup Flag */ +#define PWR_CSR_SBF ((uint16_t)0x0002) /*!< Standby Flag */ +#define PWR_CSR_PVDO ((uint16_t)0x0004) /*!< PVD Output */ +#define PWR_CSR_EWUP ((uint16_t)0x0100) /*!< Enable WKUP pin */ + +/******************************************************************************/ +/* */ +/* Backup registers */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for BKP_DR1 register ********************/ +#define BKP_DR1_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR2 register ********************/ +#define BKP_DR2_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR3 register ********************/ +#define BKP_DR3_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR4 register ********************/ +#define BKP_DR4_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR5 register ********************/ +#define BKP_DR5_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR6 register ********************/ +#define BKP_DR6_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR7 register ********************/ +#define BKP_DR7_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR8 register ********************/ +#define BKP_DR8_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR9 register ********************/ +#define BKP_DR9_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR10 register *******************/ +#define BKP_DR10_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR11 register *******************/ +#define BKP_DR11_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR12 register *******************/ +#define BKP_DR12_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR13 register *******************/ +#define BKP_DR13_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR14 register *******************/ +#define BKP_DR14_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR15 register *******************/ +#define BKP_DR15_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR16 register *******************/ +#define BKP_DR16_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR17 register *******************/ +#define BKP_DR17_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/****************** Bit definition for BKP_DR18 register ********************/ +#define BKP_DR18_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR19 register *******************/ +#define BKP_DR19_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR20 register *******************/ +#define BKP_DR20_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR21 register *******************/ +#define BKP_DR21_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR22 register *******************/ +#define BKP_DR22_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR23 register *******************/ +#define BKP_DR23_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR24 register *******************/ +#define BKP_DR24_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR25 register *******************/ +#define BKP_DR25_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR26 register *******************/ +#define BKP_DR26_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR27 register *******************/ +#define BKP_DR27_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR28 register *******************/ +#define BKP_DR28_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR29 register *******************/ +#define BKP_DR29_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR30 register *******************/ +#define BKP_DR30_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR31 register *******************/ +#define BKP_DR31_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR32 register *******************/ +#define BKP_DR32_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR33 register *******************/ +#define BKP_DR33_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR34 register *******************/ +#define BKP_DR34_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR35 register *******************/ +#define BKP_DR35_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR36 register *******************/ +#define BKP_DR36_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR37 register *******************/ +#define BKP_DR37_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR38 register *******************/ +#define BKP_DR38_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR39 register *******************/ +#define BKP_DR39_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR40 register *******************/ +#define BKP_DR40_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR41 register *******************/ +#define BKP_DR41_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/******************* Bit definition for BKP_DR42 register *******************/ +#define BKP_DR42_D ((uint16_t)0xFFFF) /*!< Backup data */ + +/****************** Bit definition for BKP_RTCCR register *******************/ +#define BKP_RTCCR_CAL ((uint16_t)0x007F) /*!< Calibration value */ +#define BKP_RTCCR_CCO ((uint16_t)0x0080) /*!< Calibration Clock Output */ +#define BKP_RTCCR_ASOE ((uint16_t)0x0100) /*!< Alarm or Second Output Enable */ +#define BKP_RTCCR_ASOS ((uint16_t)0x0200) /*!< Alarm or Second Output Selection */ + +/******************** Bit definition for BKP_CR register ********************/ +#define BKP_CR_TPE ((uint8_t)0x01) /*!< TAMPER pin enable */ +#define BKP_CR_TPAL ((uint8_t)0x02) /*!< TAMPER pin active level */ + +/******************* Bit definition for BKP_CSR register ********************/ +#define BKP_CSR_CTE ((uint16_t)0x0001) /*!< Clear Tamper event */ +#define BKP_CSR_CTI ((uint16_t)0x0002) /*!< Clear Tamper Interrupt */ +#define BKP_CSR_TPIE ((uint16_t)0x0004) /*!< TAMPER Pin interrupt enable */ +#define BKP_CSR_TEF ((uint16_t)0x0100) /*!< Tamper Event Flag */ +#define BKP_CSR_TIF ((uint16_t)0x0200) /*!< Tamper Interrupt Flag */ + +/******************************************************************************/ +/* */ +/* Reset and Clock Control */ +/* */ +/******************************************************************************/ + +/******************** Bit definition for RCC_CR register ********************/ +#define RCC_CR_HSION ((uint32_t)0x00000001) /*!< Internal High Speed clock enable */ +#define RCC_CR_HSIRDY ((uint32_t)0x00000002) /*!< Internal High Speed clock ready flag */ +#define RCC_CR_HSITRIM ((uint32_t)0x000000F8) /*!< Internal High Speed clock trimming */ +#define RCC_CR_HSICAL ((uint32_t)0x0000FF00) /*!< Internal High Speed clock Calibration */ +#define RCC_CR_HSEON ((uint32_t)0x00010000) /*!< External High Speed clock enable */ +#define RCC_CR_HSERDY ((uint32_t)0x00020000) /*!< External High Speed clock ready flag */ +#define RCC_CR_HSEBYP ((uint32_t)0x00040000) /*!< External High Speed clock Bypass */ +#define RCC_CR_CSSON ((uint32_t)0x00080000) /*!< Clock Security System enable */ +#define RCC_CR_PLLON ((uint32_t)0x01000000) /*!< PLL enable */ +#define RCC_CR_PLLRDY ((uint32_t)0x02000000) /*!< PLL clock ready flag */ + +#ifdef STM32F10X_CL + #define RCC_CR_PLL2ON ((uint32_t)0x04000000) /*!< PLL2 enable */ + #define RCC_CR_PLL2RDY ((uint32_t)0x08000000) /*!< PLL2 clock ready flag */ + #define RCC_CR_PLL3ON ((uint32_t)0x10000000) /*!< PLL3 enable */ + #define RCC_CR_PLL3RDY ((uint32_t)0x20000000) /*!< PLL3 clock ready flag */ +#endif /* STM32F10X_CL */ + +/******************* Bit definition for RCC_CFGR register *******************/ +/*!< SW configuration */ +#define RCC_CFGR_SW ((uint32_t)0x00000003) /*!< SW[1:0] bits (System clock Switch) */ +#define RCC_CFGR_SW_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define RCC_CFGR_SW_1 ((uint32_t)0x00000002) /*!< Bit 1 */ + +#define RCC_CFGR_SW_HSI ((uint32_t)0x00000000) /*!< HSI selected as system clock */ +#define RCC_CFGR_SW_HSE ((uint32_t)0x00000001) /*!< HSE selected as system clock */ +#define RCC_CFGR_SW_PLL ((uint32_t)0x00000002) /*!< PLL selected as system clock */ + +/*!< SWS configuration */ +#define RCC_CFGR_SWS ((uint32_t)0x0000000C) /*!< SWS[1:0] bits (System Clock Switch Status) */ +#define RCC_CFGR_SWS_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define RCC_CFGR_SWS_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define RCC_CFGR_SWS_HSI ((uint32_t)0x00000000) /*!< HSI oscillator used as system clock */ +#define RCC_CFGR_SWS_HSE ((uint32_t)0x00000004) /*!< HSE oscillator used as system clock */ +#define RCC_CFGR_SWS_PLL ((uint32_t)0x00000008) /*!< PLL used as system clock */ + +/*!< HPRE configuration */ +#define RCC_CFGR_HPRE ((uint32_t)0x000000F0) /*!< HPRE[3:0] bits (AHB prescaler) */ +#define RCC_CFGR_HPRE_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define RCC_CFGR_HPRE_1 ((uint32_t)0x00000020) /*!< Bit 1 */ +#define RCC_CFGR_HPRE_2 ((uint32_t)0x00000040) /*!< Bit 2 */ +#define RCC_CFGR_HPRE_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + +#define RCC_CFGR_HPRE_DIV1 ((uint32_t)0x00000000) /*!< SYSCLK not divided */ +#define RCC_CFGR_HPRE_DIV2 ((uint32_t)0x00000080) /*!< SYSCLK divided by 2 */ +#define RCC_CFGR_HPRE_DIV4 ((uint32_t)0x00000090) /*!< SYSCLK divided by 4 */ +#define RCC_CFGR_HPRE_DIV8 ((uint32_t)0x000000A0) /*!< SYSCLK divided by 8 */ +#define RCC_CFGR_HPRE_DIV16 ((uint32_t)0x000000B0) /*!< SYSCLK divided by 16 */ +#define RCC_CFGR_HPRE_DIV64 ((uint32_t)0x000000C0) /*!< SYSCLK divided by 64 */ +#define RCC_CFGR_HPRE_DIV128 ((uint32_t)0x000000D0) /*!< SYSCLK divided by 128 */ +#define RCC_CFGR_HPRE_DIV256 ((uint32_t)0x000000E0) /*!< SYSCLK divided by 256 */ +#define RCC_CFGR_HPRE_DIV512 ((uint32_t)0x000000F0) /*!< SYSCLK divided by 512 */ + +/*!< PPRE1 configuration */ +#define RCC_CFGR_PPRE1 ((uint32_t)0x00000700) /*!< PRE1[2:0] bits (APB1 prescaler) */ +#define RCC_CFGR_PPRE1_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define RCC_CFGR_PPRE1_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define RCC_CFGR_PPRE1_2 ((uint32_t)0x00000400) /*!< Bit 2 */ + +#define RCC_CFGR_PPRE1_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */ +#define RCC_CFGR_PPRE1_DIV2 ((uint32_t)0x00000400) /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE1_DIV4 ((uint32_t)0x00000500) /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE1_DIV8 ((uint32_t)0x00000600) /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE1_DIV16 ((uint32_t)0x00000700) /*!< HCLK divided by 16 */ + +/*!< PPRE2 configuration */ +#define RCC_CFGR_PPRE2 ((uint32_t)0x00003800) /*!< PRE2[2:0] bits (APB2 prescaler) */ +#define RCC_CFGR_PPRE2_0 ((uint32_t)0x00000800) /*!< Bit 0 */ +#define RCC_CFGR_PPRE2_1 ((uint32_t)0x00001000) /*!< Bit 1 */ +#define RCC_CFGR_PPRE2_2 ((uint32_t)0x00002000) /*!< Bit 2 */ + +#define RCC_CFGR_PPRE2_DIV1 ((uint32_t)0x00000000) /*!< HCLK not divided */ +#define RCC_CFGR_PPRE2_DIV2 ((uint32_t)0x00002000) /*!< HCLK divided by 2 */ +#define RCC_CFGR_PPRE2_DIV4 ((uint32_t)0x00002800) /*!< HCLK divided by 4 */ +#define RCC_CFGR_PPRE2_DIV8 ((uint32_t)0x00003000) /*!< HCLK divided by 8 */ +#define RCC_CFGR_PPRE2_DIV16 ((uint32_t)0x00003800) /*!< HCLK divided by 16 */ + +/*!< ADCPPRE configuration */ +#define RCC_CFGR_ADCPRE ((uint32_t)0x0000C000) /*!< ADCPRE[1:0] bits (ADC prescaler) */ +#define RCC_CFGR_ADCPRE_0 ((uint32_t)0x00004000) /*!< Bit 0 */ +#define RCC_CFGR_ADCPRE_1 ((uint32_t)0x00008000) /*!< Bit 1 */ + +#define RCC_CFGR_ADCPRE_DIV2 ((uint32_t)0x00000000) /*!< PCLK2 divided by 2 */ +#define RCC_CFGR_ADCPRE_DIV4 ((uint32_t)0x00004000) /*!< PCLK2 divided by 4 */ +#define RCC_CFGR_ADCPRE_DIV6 ((uint32_t)0x00008000) /*!< PCLK2 divided by 6 */ +#define RCC_CFGR_ADCPRE_DIV8 ((uint32_t)0x0000C000) /*!< PCLK2 divided by 8 */ + +#define RCC_CFGR_PLLSRC ((uint32_t)0x00010000) /*!< PLL entry clock source */ + +#define RCC_CFGR_PLLXTPRE ((uint32_t)0x00020000) /*!< HSE divider for PLL entry */ + +/*!< PLLMUL configuration */ +#define RCC_CFGR_PLLMULL ((uint32_t)0x003C0000) /*!< PLLMUL[3:0] bits (PLL multiplication factor) */ +#define RCC_CFGR_PLLMULL_0 ((uint32_t)0x00040000) /*!< Bit 0 */ +#define RCC_CFGR_PLLMULL_1 ((uint32_t)0x00080000) /*!< Bit 1 */ +#define RCC_CFGR_PLLMULL_2 ((uint32_t)0x00100000) /*!< Bit 2 */ +#define RCC_CFGR_PLLMULL_3 ((uint32_t)0x00200000) /*!< Bit 3 */ + +#ifdef STM32F10X_CL + #define RCC_CFGR_PLLSRC_HSI_Div2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */ + #define RCC_CFGR_PLLSRC_PREDIV1 ((uint32_t)0x00010000) /*!< PREDIV1 clock selected as PLL entry clock source */ + + #define RCC_CFGR_PLLXTPRE_PREDIV1 ((uint32_t)0x00000000) /*!< PREDIV1 clock not divided for PLL entry */ + #define RCC_CFGR_PLLXTPRE_PREDIV1_Div2 ((uint32_t)0x00020000) /*!< PREDIV1 clock divided by 2 for PLL entry */ + + #define RCC_CFGR_PLLMULL4 ((uint32_t)0x00080000) /*!< PLL input clock * 4 */ + #define RCC_CFGR_PLLMULL5 ((uint32_t)0x000C0000) /*!< PLL input clock * 5 */ + #define RCC_CFGR_PLLMULL6 ((uint32_t)0x00100000) /*!< PLL input clock * 6 */ + #define RCC_CFGR_PLLMULL7 ((uint32_t)0x00140000) /*!< PLL input clock * 7 */ + #define RCC_CFGR_PLLMULL8 ((uint32_t)0x00180000) /*!< PLL input clock * 8 */ + #define RCC_CFGR_PLLMULL9 ((uint32_t)0x001C0000) /*!< PLL input clock * 9 */ + #define RCC_CFGR_PLLMULL6_5 ((uint32_t)0x00340000) /*!< PLL input clock * 6.5 */ + + #define RCC_CFGR_OTGFSPRE ((uint32_t)0x00400000) /*!< USB OTG FS prescaler */ + +/*!< MCO configuration */ + #define RCC_CFGR_MCO ((uint32_t)0x0F000000) /*!< MCO[3:0] bits (Microcontroller Clock Output) */ + #define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */ + #define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */ + #define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */ + #define RCC_CFGR_MCO_3 ((uint32_t)0x08000000) /*!< Bit 3 */ + + #define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ + #define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */ + #define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */ + #define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */ + #define RCC_CFGR_MCO_PLLCLK_Div2 ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */ + #define RCC_CFGR_MCO_PLL2CLK ((uint32_t)0x08000000) /*!< PLL2 clock selected as MCO source*/ + #define RCC_CFGR_MCO_PLL3CLK_Div2 ((uint32_t)0x09000000) /*!< PLL3 clock divided by 2 selected as MCO source*/ + #define RCC_CFGR_MCO_Ext_HSE ((uint32_t)0x0A000000) /*!< XT1 external 3-25 MHz oscillator clock selected as MCO source */ + #define RCC_CFGR_MCO_PLL3CLK ((uint32_t)0x0B000000) /*!< PLL3 clock selected as MCO source */ +#else + #define RCC_CFGR_PLLSRC_HSI_Div2 ((uint32_t)0x00000000) /*!< HSI clock divided by 2 selected as PLL entry clock source */ + #define RCC_CFGR_PLLSRC_HSE ((uint32_t)0x00010000) /*!< HSE clock selected as PLL entry clock source */ + + #define RCC_CFGR_PLLXTPRE_HSE ((uint32_t)0x00000000) /*!< HSE clock not divided for PLL entry */ + #define RCC_CFGR_PLLXTPRE_HSE_Div2 ((uint32_t)0x00020000) /*!< HSE clock divided by 2 for PLL entry */ + + #define RCC_CFGR_PLLMULL2 ((uint32_t)0x00000000) /*!< PLL input clock*2 */ + #define RCC_CFGR_PLLMULL3 ((uint32_t)0x00040000) /*!< PLL input clock*3 */ + #define RCC_CFGR_PLLMULL4 ((uint32_t)0x00080000) /*!< PLL input clock*4 */ + #define RCC_CFGR_PLLMULL5 ((uint32_t)0x000C0000) /*!< PLL input clock*5 */ + #define RCC_CFGR_PLLMULL6 ((uint32_t)0x00100000) /*!< PLL input clock*6 */ + #define RCC_CFGR_PLLMULL7 ((uint32_t)0x00140000) /*!< PLL input clock*7 */ + #define RCC_CFGR_PLLMULL8 ((uint32_t)0x00180000) /*!< PLL input clock*8 */ + #define RCC_CFGR_PLLMULL9 ((uint32_t)0x001C0000) /*!< PLL input clock*9 */ + #define RCC_CFGR_PLLMULL10 ((uint32_t)0x00200000) /*!< PLL input clock10 */ + #define RCC_CFGR_PLLMULL11 ((uint32_t)0x00240000) /*!< PLL input clock*11 */ + #define RCC_CFGR_PLLMULL12 ((uint32_t)0x00280000) /*!< PLL input clock*12 */ + #define RCC_CFGR_PLLMULL13 ((uint32_t)0x002C0000) /*!< PLL input clock*13 */ + #define RCC_CFGR_PLLMULL14 ((uint32_t)0x00300000) /*!< PLL input clock*14 */ + #define RCC_CFGR_PLLMULL15 ((uint32_t)0x00340000) /*!< PLL input clock*15 */ + #define RCC_CFGR_PLLMULL16 ((uint32_t)0x00380000) /*!< PLL input clock*16 */ + #define RCC_CFGR_USBPRE ((uint32_t)0x00400000) /*!< USB Device prescaler */ + +/*!< MCO configuration */ + #define RCC_CFGR_MCO ((uint32_t)0x07000000) /*!< MCO[2:0] bits (Microcontroller Clock Output) */ + #define RCC_CFGR_MCO_0 ((uint32_t)0x01000000) /*!< Bit 0 */ + #define RCC_CFGR_MCO_1 ((uint32_t)0x02000000) /*!< Bit 1 */ + #define RCC_CFGR_MCO_2 ((uint32_t)0x04000000) /*!< Bit 2 */ + + #define RCC_CFGR_MCO_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ + #define RCC_CFGR_MCO_SYSCLK ((uint32_t)0x04000000) /*!< System clock selected as MCO source */ + #define RCC_CFGR_MCO_HSI ((uint32_t)0x05000000) /*!< HSI clock selected as MCO source */ + #define RCC_CFGR_MCO_HSE ((uint32_t)0x06000000) /*!< HSE clock selected as MCO source */ + #define RCC_CFGR_MCO_PLL ((uint32_t)0x07000000) /*!< PLL clock divided by 2 selected as MCO source */ +#endif /* STM32F10X_CL */ + +/*!<****************** Bit definition for RCC_CIR register ********************/ +#define RCC_CIR_LSIRDYF ((uint32_t)0x00000001) /*!< LSI Ready Interrupt flag */ +#define RCC_CIR_LSERDYF ((uint32_t)0x00000002) /*!< LSE Ready Interrupt flag */ +#define RCC_CIR_HSIRDYF ((uint32_t)0x00000004) /*!< HSI Ready Interrupt flag */ +#define RCC_CIR_HSERDYF ((uint32_t)0x00000008) /*!< HSE Ready Interrupt flag */ +#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010) /*!< PLL Ready Interrupt flag */ +#define RCC_CIR_CSSF ((uint32_t)0x00000080) /*!< Clock Security System Interrupt flag */ +#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100) /*!< LSI Ready Interrupt Enable */ +#define RCC_CIR_LSERDYIE ((uint32_t)0x00000200) /*!< LSE Ready Interrupt Enable */ +#define RCC_CIR_HSIRDYIE ((uint32_t)0x00000400) /*!< HSI Ready Interrupt Enable */ +#define RCC_CIR_HSERDYIE ((uint32_t)0x00000800) /*!< HSE Ready Interrupt Enable */ +#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000) /*!< PLL Ready Interrupt Enable */ +#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000) /*!< LSI Ready Interrupt Clear */ +#define RCC_CIR_LSERDYC ((uint32_t)0x00020000) /*!< LSE Ready Interrupt Clear */ +#define RCC_CIR_HSIRDYC ((uint32_t)0x00040000) /*!< HSI Ready Interrupt Clear */ +#define RCC_CIR_HSERDYC ((uint32_t)0x00080000) /*!< HSE Ready Interrupt Clear */ +#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000) /*!< PLL Ready Interrupt Clear */ +#define RCC_CIR_CSSC ((uint32_t)0x00800000) /*!< Clock Security System Interrupt Clear */ + +#ifdef STM32F10X_CL + #define RCC_CIR_PLL2RDYF ((uint32_t)0x00000020) /*!< PLL2 Ready Interrupt flag */ + #define RCC_CIR_PLL3RDYF ((uint32_t)0x00000040) /*!< PLL3 Ready Interrupt flag */ + #define RCC_CIR_PLL2RDYIE ((uint32_t)0x00002000) /*!< PLL2 Ready Interrupt Enable */ + #define RCC_CIR_PLL3RDYIE ((uint32_t)0x00004000) /*!< PLL3 Ready Interrupt Enable */ + #define RCC_CIR_PLL2RDYC ((uint32_t)0x00200000) /*!< PLL2 Ready Interrupt Clear */ + #define RCC_CIR_PLL3RDYC ((uint32_t)0x00400000) /*!< PLL3 Ready Interrupt Clear */ +#endif /* STM32F10X_CL */ + +/***************** Bit definition for RCC_APB2RSTR register *****************/ +#define RCC_APB2RSTR_AFIORST ((uint16_t)0x0001) /*!< Alternate Function I/O reset */ +#define RCC_APB2RSTR_IOPARST ((uint16_t)0x0004) /*!< I/O port A reset */ +#define RCC_APB2RSTR_IOPBRST ((uint16_t)0x0008) /*!< I/O port B reset */ +#define RCC_APB2RSTR_IOPCRST ((uint16_t)0x0010) /*!< I/O port C reset */ +#define RCC_APB2RSTR_IOPDRST ((uint16_t)0x0020) /*!< I/O port D reset */ +#define RCC_APB2RSTR_ADC1RST ((uint16_t)0x0200) /*!< ADC 1 interface reset */ +#define RCC_APB2RSTR_ADC2RST ((uint16_t)0x0400) /*!< ADC 2 interface reset */ +#define RCC_APB2RSTR_TIM1RST ((uint16_t)0x0800) /*!< TIM1 Timer reset */ +#define RCC_APB2RSTR_SPI1RST ((uint16_t)0x1000) /*!< SPI 1 reset */ +#define RCC_APB2RSTR_USART1RST ((uint16_t)0x4000) /*!< USART1 reset */ + +#ifndef STM32F10X_LD + #define RCC_APB2RSTR_IOPERST ((uint16_t)0x0040) /*!< I/O port E reset */ +#endif /* STM32F10X_HD */ + +#ifdef STM32F10X_HD + #define RCC_APB2RSTR_IOPFRST ((uint16_t)0x0080) /*!< I/O port F reset */ + #define RCC_APB2RSTR_IOPGRST ((uint16_t)0x0100) /*!< I/O port G reset */ + #define RCC_APB2RSTR_TIM8RST ((uint16_t)0x2000) /*!< TIM8 Timer reset */ + #define RCC_APB2RSTR_ADC3RST ((uint16_t)0x8000) /*!< ADC3 interface reset */ +#endif /* STM32F10X_HD */ + +/***************** Bit definition for RCC_APB1RSTR register *****************/ +#define RCC_APB1RSTR_TIM2RST ((uint32_t)0x00000001) /*!< Timer 2 reset */ +#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002) /*!< Timer 3 reset */ +#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800) /*!< Window Watchdog reset */ +#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000) /*!< USART 2 reset */ +#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000) /*!< I2C 1 reset */ +#define RCC_APB1RSTR_CAN1RST ((uint32_t)0x02000000) /*!< CAN1 reset */ +#define RCC_APB1RSTR_BKPRST ((uint32_t)0x08000000) /*!< Backup interface reset */ +#define RCC_APB1RSTR_PWRRST ((uint32_t)0x10000000) /*!< Power interface reset */ + +#ifndef STM32F10X_LD + #define RCC_APB1RSTR_TIM4RST ((uint32_t)0x00000004) /*!< Timer 4 reset */ + #define RCC_APB1RSTR_SPI2RST ((uint32_t)0x00004000) /*!< SPI 2 reset */ + #define RCC_APB1RSTR_USART3RST ((uint32_t)0x00040000) /*!< RUSART 3 reset */ + #define RCC_APB1RSTR_I2C2RST ((uint32_t)0x00400000) /*!< I2C 2 reset */ +#endif /* STM32F10X_HD */ + +#if defined (STM32F10X_HD) || defined (STM32F10X_MD) || defined (STM32F10X_LD) + #define RCC_APB1RSTR_USBRST ((uint32_t)0x00800000) /*!< USB Device reset */ +#endif + +#if defined (STM32F10X_HD) || defined (STM32F10X_CL) + #define RCC_APB1RSTR_TIM5RST ((uint32_t)0x00000008) /*!< Timer 5 reset */ + #define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010) /*!< Timer 6 reset */ + #define RCC_APB1RSTR_TIM7RST ((uint32_t)0x00000020) /*!< Timer 7 reset */ + #define RCC_APB1RSTR_SPI3RST ((uint32_t)0x00008000) /*!< SPI 3 reset */ + #define RCC_APB1RSTR_UART4RST ((uint32_t)0x00080000) /*!< UART 4 reset */ + #define RCC_APB1RSTR_UART5RST ((uint32_t)0x00100000) /*!< UART 5 reset */ + #define RCC_APB1RSTR_DACRST ((uint32_t)0x20000000) /*!< DAC interface reset */ +#endif + +#ifdef STM32F10X_CL + #define RCC_APB1RSTR_CAN2RST ((uint32_t)0x08000000) /*!< CAN2 reset */ +#endif /* STM32F10X_CL */ + +/****************** Bit definition for RCC_AHBENR register ******************/ +#define RCC_AHBENR_DMA1EN ((uint16_t)0x0001) /*!< DMA1 clock enable */ +#define RCC_AHBENR_SRAMEN ((uint16_t)0x0004) /*!< SRAM interface clock enable */ +#define RCC_AHBENR_FLITFEN ((uint16_t)0x0010) /*!< FLITF clock enable */ +#define RCC_AHBENR_CRCEN ((uint16_t)0x0040) /*!< CRC clock enable */ + +#if defined (STM32F10X_HD) || defined (STM32F10X_CL) + #define RCC_AHBENR_DMA2EN ((uint16_t)0x0002) /*!< DMA2 clock enable */ +#endif + +#ifdef STM32F10X_HD + #define RCC_AHBENR_FSMCEN ((uint16_t)0x0100) /*!< FSMC clock enable */ + #define RCC_AHBENR_SDIOEN ((uint16_t)0x0400) /*!< SDIO clock enable */ +#endif /* STM32F10X_HD */ + +#ifdef STM32F10X_CL + #define RCC_AHBENR_OTGFSEN ((uint32_t)0x00001000) /*!< USB OTG FS clock enable */ + #define RCC_AHBENR_ETHMACEN ((uint32_t)0x00004000) /*!< ETHERNET MAC clock enable */ + #define RCC_AHBENR_ETHMACTXEN ((uint32_t)0x00008000) /*!< ETHERNET MAC Tx clock enable */ + #define RCC_AHBENR_ETHMACRXEN ((uint32_t)0x00010000) /*!< ETHERNET MAC Rx clock enable */ +#endif /* STM32F10X_CL */ + +/****************** Bit definition for RCC_APB2ENR register *****************/ +#define RCC_APB2ENR_AFIOEN ((uint16_t)0x0001) /*!< Alternate Function I/O clock enable */ +#define RCC_APB2ENR_IOPAEN ((uint16_t)0x0004) /*!< I/O port A clock enable */ +#define RCC_APB2ENR_IOPBEN ((uint16_t)0x0008) /*!< I/O port B clock enable */ +#define RCC_APB2ENR_IOPCEN ((uint16_t)0x0010) /*!< I/O port C clock enable */ +#define RCC_APB2ENR_IOPDEN ((uint16_t)0x0020) /*!< I/O port D clock enable */ +#define RCC_APB2ENR_ADC1EN ((uint16_t)0x0200) /*!< ADC 1 interface clock enable */ +#define RCC_APB2ENR_ADC2EN ((uint16_t)0x0400) /*!< ADC 2 interface clock enable */ +#define RCC_APB2ENR_TIM1EN ((uint16_t)0x0800) /*!< TIM1 Timer clock enable */ +#define RCC_APB2ENR_SPI1EN ((uint16_t)0x1000) /*!< SPI 1 clock enable */ +#define RCC_APB2ENR_USART1EN ((uint16_t)0x4000) /*!< USART1 clock enable */ + +#ifndef STM32F10X_LD + #define RCC_APB2ENR_IOPEEN ((uint16_t)0x0040) /*!< I/O port E clock enable */ +#endif /* STM32F10X_HD */ + +#ifdef STM32F10X_HD + #define RCC_APB2ENR_IOPFEN ((uint16_t)0x0080) /*!< I/O port F clock enable */ + #define RCC_APB2ENR_IOPGEN ((uint16_t)0x0100) /*!< I/O port G clock enable */ + #define RCC_APB2ENR_TIM8EN ((uint16_t)0x2000) /*!< TIM8 Timer clock enable */ + #define RCC_APB2ENR_ADC3EN ((uint16_t)0x8000) /*!< DMA1 clock enable */ +#endif /* STM32F10X_HD */ + +/***************** Bit definition for RCC_APB1ENR register ******************/ +#define RCC_APB1ENR_TIM2EN ((uint32_t)0x00000001) /*!< Timer 2 clock enabled*/ +#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002) /*!< Timer 3 clock enable */ +#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enable */ +#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000) /*!< USART 2 clock enable */ +#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000) /*!< I2C 1 clock enable */ +#define RCC_APB1ENR_CAN1EN ((uint32_t)0x02000000) /*!< CAN1 clock enable */ +#define RCC_APB1ENR_BKPEN ((uint32_t)0x08000000) /*!< Backup interface clock enable */ +#define RCC_APB1ENR_PWREN ((uint32_t)0x10000000) /*!< Power interface clock enable */ + +#ifndef STM32F10X_LD + #define RCC_APB1ENR_TIM4EN ((uint32_t)0x00000004) /*!< Timer 4 clock enable */ + #define RCC_APB1ENR_SPI2EN ((uint32_t)0x00004000) /*!< SPI 2 clock enable */ + #define RCC_APB1ENR_USART3EN ((uint32_t)0x00040000) /*!< USART 3 clock enable */ + #define RCC_APB1ENR_I2C2EN ((uint32_t)0x00400000) /*!< I2C 2 clock enable */ +#endif /* STM32F10X_HD */ + +#if defined (STM32F10X_HD) || defined (STM32F10X_MD) || defined (STM32F10X_LD) + #define RCC_APB1ENR_USBEN ((uint32_t)0x00800000) /*!< USB Device clock enable */ +#endif + +#if defined (STM32F10X_HD) || defined (STM32F10X_CL) + #define RCC_APB1ENR_TIM5EN ((uint32_t)0x00000008) /*!< Timer 5 clock enable */ + #define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010) /*!< Timer 6 clock enable */ + #define RCC_APB1ENR_TIM7EN ((uint32_t)0x00000020) /*!< Timer 7 clock enable */ + #define RCC_APB1ENR_SPI3EN ((uint32_t)0x00008000) /*!< SPI 3 clock enable */ + #define RCC_APB1ENR_UART4EN ((uint32_t)0x00080000) /*!< UART 4 clock enable */ + #define RCC_APB1ENR_UART5EN ((uint32_t)0x00100000) /*!< UART 5 clock enable */ + #define RCC_APB1ENR_DACEN ((uint32_t)0x20000000) /*!< DAC interface clock enable */ +#endif + +#ifdef STM32F10X_CL + #define RCC_APB1ENR_CAN2EN ((uint32_t)0x08000000) /*!< CAN2 clock enable */ +#endif /* STM32F10X_CL */ + +/******************* Bit definition for RCC_BDCR register *******************/ +#define RCC_BDCR_LSEON ((uint32_t)0x00000001) /*!< External Low Speed oscillator enable */ +#define RCC_BDCR_LSERDY ((uint32_t)0x00000002) /*!< External Low Speed oscillator Ready */ +#define RCC_BDCR_LSEBYP ((uint32_t)0x00000004) /*!< External Low Speed oscillator Bypass */ + +#define RCC_BDCR_RTCSEL ((uint32_t)0x00000300) /*!< RTCSEL[1:0] bits (RTC clock source selection) */ +#define RCC_BDCR_RTCSEL_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define RCC_BDCR_RTCSEL_1 ((uint32_t)0x00000200) /*!< Bit 1 */ + +/*!< RTC congiguration */ +#define RCC_BDCR_RTCSEL_NOCLOCK ((uint32_t)0x00000000) /*!< No clock */ +#define RCC_BDCR_RTCSEL_LSE ((uint32_t)0x00000100) /*!< LSE oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_LSI ((uint32_t)0x00000200) /*!< LSI oscillator clock used as RTC clock */ +#define RCC_BDCR_RTCSEL_HSE ((uint32_t)0x00000300) /*!< HSE oscillator clock divided by 128 used as RTC clock */ + +#define RCC_BDCR_RTCEN ((uint32_t)0x00008000) /*!< RTC clock enable */ +#define RCC_BDCR_BDRST ((uint32_t)0x00010000) /*!< Backup domain software reset */ + +/******************* Bit definition for RCC_CSR register ********************/ +#define RCC_CSR_LSION ((uint32_t)0x00000001) /*!< Internal Low Speed oscillator enable */ +#define RCC_CSR_LSIRDY ((uint32_t)0x00000002) /*!< Internal Low Speed oscillator Ready */ +#define RCC_CSR_RMVF ((uint32_t)0x01000000) /*!< Remove reset flag */ +#define RCC_CSR_PINRSTF ((uint32_t)0x04000000) /*!< PIN reset flag */ +#define RCC_CSR_PORRSTF ((uint32_t)0x08000000) /*!< POR/PDR reset flag */ +#define RCC_CSR_SFTRSTF ((uint32_t)0x10000000) /*!< Software Reset flag */ +#define RCC_CSR_IWDGRSTF ((uint32_t)0x20000000) /*!< Independent Watchdog reset flag */ +#define RCC_CSR_WWDGRSTF ((uint32_t)0x40000000) /*!< Window watchdog reset flag */ +#define RCC_CSR_LPWRRSTF ((uint32_t)0x80000000) /*!< Low-Power reset flag */ + +#ifdef STM32F10X_CL +/******************* Bit definition for RCC_AHBRSTR register ****************/ + #define RCC_AHBRSTR_OTGFSRST ((uint32_t)0x00001000) /*!< USB OTG FS reset */ + #define RCC_AHBRSTR_ETHMACRST ((uint32_t)0x00004000) /*!< ETHERNET MAC reset */ + +/******************* Bit definition for RCC_CFGR2 register ******************/ +/*!< PREDIV1 configuration */ + #define RCC_CFGR2_PREDIV1 ((uint32_t)0x0000000F) /*!< PREDIV1[3:0] bits */ + #define RCC_CFGR2_PREDIV1_0 ((uint32_t)0x00000001) /*!< Bit 0 */ + #define RCC_CFGR2_PREDIV1_1 ((uint32_t)0x00000002) /*!< Bit 1 */ + #define RCC_CFGR2_PREDIV1_2 ((uint32_t)0x00000004) /*!< Bit 2 */ + #define RCC_CFGR2_PREDIV1_3 ((uint32_t)0x00000008) /*!< Bit 3 */ + + #define RCC_CFGR2_PREDIV1_DIV1 ((uint32_t)0x00000000) /*!< PREDIV1 input clock not divided */ + #define RCC_CFGR2_PREDIV1_DIV2 ((uint32_t)0x00000001) /*!< PREDIV1 input clock divided by 2 */ + #define RCC_CFGR2_PREDIV1_DIV3 ((uint32_t)0x00000002) /*!< PREDIV1 input clock divided by 3 */ + #define RCC_CFGR2_PREDIV1_DIV4 ((uint32_t)0x00000003) /*!< PREDIV1 input clock divided by 4 */ + #define RCC_CFGR2_PREDIV1_DIV5 ((uint32_t)0x00000004) /*!< PREDIV1 input clock divided by 5 */ + #define RCC_CFGR2_PREDIV1_DIV6 ((uint32_t)0x00000005) /*!< PREDIV1 input clock divided by 6 */ + #define RCC_CFGR2_PREDIV1_DIV7 ((uint32_t)0x00000006) /*!< PREDIV1 input clock divided by 7 */ + #define RCC_CFGR2_PREDIV1_DIV8 ((uint32_t)0x00000007) /*!< PREDIV1 input clock divided by 8 */ + #define RCC_CFGR2_PREDIV1_DIV9 ((uint32_t)0x00000008) /*!< PREDIV1 input clock divided by 9 */ + #define RCC_CFGR2_PREDIV1_DIV10 ((uint32_t)0x00000009) /*!< PREDIV1 input clock divided by 10 */ + #define RCC_CFGR2_PREDIV1_DIV11 ((uint32_t)0x0000000A) /*!< PREDIV1 input clock divided by 11 */ + #define RCC_CFGR2_PREDIV1_DIV12 ((uint32_t)0x0000000B) /*!< PREDIV1 input clock divided by 12 */ + #define RCC_CFGR2_PREDIV1_DIV13 ((uint32_t)0x0000000C) /*!< PREDIV1 input clock divided by 13 */ + #define RCC_CFGR2_PREDIV1_DIV14 ((uint32_t)0x0000000D) /*!< PREDIV1 input clock divided by 14 */ + #define RCC_CFGR2_PREDIV1_DIV15 ((uint32_t)0x0000000E) /*!< PREDIV1 input clock divided by 15 */ + #define RCC_CFGR2_PREDIV1_DIV16 ((uint32_t)0x0000000F) /*!< PREDIV1 input clock divided by 16 */ + +/*!< PREDIV2 configuration */ + #define RCC_CFGR2_PREDIV2 ((uint32_t)0x000000F0) /*!< PREDIV2[3:0] bits */ + #define RCC_CFGR2_PREDIV2_0 ((uint32_t)0x00000010) /*!< Bit 0 */ + #define RCC_CFGR2_PREDIV2_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + #define RCC_CFGR2_PREDIV2_2 ((uint32_t)0x00000040) /*!< Bit 2 */ + #define RCC_CFGR2_PREDIV2_3 ((uint32_t)0x00000080) /*!< Bit 3 */ + + #define RCC_CFGR2_PREDIV2_DIV1 ((uint32_t)0x00000000) /*!< PREDIV2 input clock not divided */ + #define RCC_CFGR2_PREDIV2_DIV2 ((uint32_t)0x00000010) /*!< PREDIV2 input clock divided by 2 */ + #define RCC_CFGR2_PREDIV2_DIV3 ((uint32_t)0x00000020) /*!< PREDIV2 input clock divided by 3 */ + #define RCC_CFGR2_PREDIV2_DIV4 ((uint32_t)0x00000030) /*!< PREDIV2 input clock divided by 4 */ + #define RCC_CFGR2_PREDIV2_DIV5 ((uint32_t)0x00000040) /*!< PREDIV2 input clock divided by 5 */ + #define RCC_CFGR2_PREDIV2_DIV6 ((uint32_t)0x00000050) /*!< PREDIV2 input clock divided by 6 */ + #define RCC_CFGR2_PREDIV2_DIV7 ((uint32_t)0x00000060) /*!< PREDIV2 input clock divided by 7 */ + #define RCC_CFGR2_PREDIV2_DIV8 ((uint32_t)0x00000070) /*!< PREDIV2 input clock divided by 8 */ + #define RCC_CFGR2_PREDIV2_DIV9 ((uint32_t)0x00000080) /*!< PREDIV2 input clock divided by 9 */ + #define RCC_CFGR2_PREDIV2_DIV10 ((uint32_t)0x00000090) /*!< PREDIV2 input clock divided by 10 */ + #define RCC_CFGR2_PREDIV2_DIV11 ((uint32_t)0x000000A0) /*!< PREDIV2 input clock divided by 11 */ + #define RCC_CFGR2_PREDIV2_DIV12 ((uint32_t)0x000000B0) /*!< PREDIV2 input clock divided by 12 */ + #define RCC_CFGR2_PREDIV2_DIV13 ((uint32_t)0x000000C0) /*!< PREDIV2 input clock divided by 13 */ + #define RCC_CFGR2_PREDIV2_DIV14 ((uint32_t)0x000000D0) /*!< PREDIV2 input clock divided by 14 */ + #define RCC_CFGR2_PREDIV2_DIV15 ((uint32_t)0x000000E0) /*!< PREDIV2 input clock divided by 15 */ + #define RCC_CFGR2_PREDIV2_DIV16 ((uint32_t)0x000000F0) /*!< PREDIV2 input clock divided by 16 */ + +/*!< PLL2MUL configuration */ + #define RCC_CFGR2_PLL2MUL ((uint32_t)0x00000F00) /*!< PLL2MUL[3:0] bits */ + #define RCC_CFGR2_PLL2MUL_0 ((uint32_t)0x00000100) /*!< Bit 0 */ + #define RCC_CFGR2_PLL2MUL_1 ((uint32_t)0x00000200) /*!< Bit 1 */ + #define RCC_CFGR2_PLL2MUL_2 ((uint32_t)0x00000400) /*!< Bit 2 */ + #define RCC_CFGR2_PLL2MUL_3 ((uint32_t)0x00000800) /*!< Bit 3 */ + + #define RCC_CFGR2_PLL2MUL8 ((uint32_t)0x00000600) /*!< PLL2 input clock * 8 */ + #define RCC_CFGR2_PLL2MUL9 ((uint32_t)0x00000700) /*!< PLL2 input clock * 9 */ + #define RCC_CFGR2_PLL2MUL10 ((uint32_t)0x00000800) /*!< PLL2 input clock * 10 */ + #define RCC_CFGR2_PLL2MUL11 ((uint32_t)0x00000900) /*!< PLL2 input clock * 11 */ + #define RCC_CFGR2_PLL2MUL12 ((uint32_t)0x00000A00) /*!< PLL2 input clock * 12 */ + #define RCC_CFGR2_PLL2MUL13 ((uint32_t)0x00000B00) /*!< PLL2 input clock * 13 */ + #define RCC_CFGR2_PLL2MUL14 ((uint32_t)0x00000C00) /*!< PLL2 input clock * 14 */ + #define RCC_CFGR2_PLL2MUL16 ((uint32_t)0x00000E00) /*!< PLL2 input clock * 16 */ + #define RCC_CFGR2_PLL2MUL20 ((uint32_t)0x00000F00) /*!< PLL2 input clock * 20 */ + +/*!< PLL3MUL configuration */ + #define RCC_CFGR2_PLL3MUL ((uint32_t)0x0000F000) /*!< PLL3MUL[3:0] bits */ + #define RCC_CFGR2_PLL3MUL_0 ((uint32_t)0x00001000) /*!< Bit 0 */ + #define RCC_CFGR2_PLL3MUL_1 ((uint32_t)0x00002000) /*!< Bit 1 */ + #define RCC_CFGR2_PLL3MUL_2 ((uint32_t)0x00004000) /*!< Bit 2 */ + #define RCC_CFGR2_PLL3MUL_3 ((uint32_t)0x00008000) /*!< Bit 3 */ + + #define RCC_CFGR2_PLL3MUL8 ((uint32_t)0x00006000) /*!< PLL3 input clock * 8 */ + #define RCC_CFGR2_PLL3MUL9 ((uint32_t)0x00007000) /*!< PLL3 input clock * 9 */ + #define RCC_CFGR2_PLL3MUL10 ((uint32_t)0x00008000) /*!< PLL3 input clock * 10 */ + #define RCC_CFGR2_PLL3MUL11 ((uint32_t)0x00009000) /*!< PLL3 input clock * 11 */ + #define RCC_CFGR2_PLL3MUL12 ((uint32_t)0x0000A000) /*!< PLL3 input clock * 12 */ + #define RCC_CFGR2_PLL3MUL13 ((uint32_t)0x0000B000) /*!< PLL3 input clock * 13 */ + #define RCC_CFGR2_PLL3MUL14 ((uint32_t)0x0000C000) /*!< PLL3 input clock * 14 */ + #define RCC_CFGR2_PLL3MUL16 ((uint32_t)0x0000E000) /*!< PLL3 input clock * 16 */ + #define RCC_CFGR2_PLL3MUL20 ((uint32_t)0x0000F000) /*!< PLL3 input clock * 20 */ + + #define RCC_CFGR2_PREDIV1SRC ((uint32_t)0x00010000) /*!< PREDIV1 entry clock source */ + #define RCC_CFGR2_PREDIV1SRC_PLL2 ((uint32_t)0x00010000) /*!< PLL2 selected as PREDIV1 entry clock source */ + #define RCC_CFGR2_PREDIV1SRC_HSE ((uint32_t)0x00000000) /*!< HSE selected as PREDIV1 entry clock source */ + #define RCC_CFGR2_I2S2SRC ((uint32_t)0x00020000) /*!< I2S2 entry clock source */ + #define RCC_CFGR2_I2S3SRC ((uint32_t)0x00040000) /*!< I2S3 clock source */ +#endif /* STM32F10X_CL */ + +/******************************************************************************/ +/* */ +/* General Purpose and Alternate Function I/O */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for GPIO_CRL register *******************/ +#define GPIO_CRL_MODE ((uint32_t)0x33333333) /*!< Port x mode bits */ + +#define GPIO_CRL_MODE0 ((uint32_t)0x00000003) /*!< MODE0[1:0] bits (Port x mode bits, pin 0) */ +#define GPIO_CRL_MODE0_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define GPIO_CRL_MODE0_1 ((uint32_t)0x00000002) /*!< Bit 1 */ + +#define GPIO_CRL_MODE1 ((uint32_t)0x00000030) /*!< MODE1[1:0] bits (Port x mode bits, pin 1) */ +#define GPIO_CRL_MODE1_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define GPIO_CRL_MODE1_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define GPIO_CRL_MODE2 ((uint32_t)0x00000300) /*!< MODE2[1:0] bits (Port x mode bits, pin 2) */ +#define GPIO_CRL_MODE2_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define GPIO_CRL_MODE2_1 ((uint32_t)0x00000200) /*!< Bit 1 */ + +#define GPIO_CRL_MODE3 ((uint32_t)0x00003000) /*!< MODE3[1:0] bits (Port x mode bits, pin 3) */ +#define GPIO_CRL_MODE3_0 ((uint32_t)0x00001000) /*!< Bit 0 */ +#define GPIO_CRL_MODE3_1 ((uint32_t)0x00002000) /*!< Bit 1 */ + +#define GPIO_CRL_MODE4 ((uint32_t)0x00030000) /*!< MODE4[1:0] bits (Port x mode bits, pin 4) */ +#define GPIO_CRL_MODE4_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define GPIO_CRL_MODE4_1 ((uint32_t)0x00020000) /*!< Bit 1 */ + +#define GPIO_CRL_MODE5 ((uint32_t)0x00300000) /*!< MODE5[1:0] bits (Port x mode bits, pin 5) */ +#define GPIO_CRL_MODE5_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define GPIO_CRL_MODE5_1 ((uint32_t)0x00200000) /*!< Bit 1 */ + +#define GPIO_CRL_MODE6 ((uint32_t)0x03000000) /*!< MODE6[1:0] bits (Port x mode bits, pin 6) */ +#define GPIO_CRL_MODE6_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define GPIO_CRL_MODE6_1 ((uint32_t)0x02000000) /*!< Bit 1 */ + +#define GPIO_CRL_MODE7 ((uint32_t)0x30000000) /*!< MODE7[1:0] bits (Port x mode bits, pin 7) */ +#define GPIO_CRL_MODE7_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define GPIO_CRL_MODE7_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +#define GPIO_CRL_CNF ((uint32_t)0xCCCCCCCC) /*!< Port x configuration bits */ + +#define GPIO_CRL_CNF0 ((uint32_t)0x0000000C) /*!< CNF0[1:0] bits (Port x configuration bits, pin 0) */ +#define GPIO_CRL_CNF0_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define GPIO_CRL_CNF0_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define GPIO_CRL_CNF1 ((uint32_t)0x000000C0) /*!< CNF1[1:0] bits (Port x configuration bits, pin 1) */ +#define GPIO_CRL_CNF1_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define GPIO_CRL_CNF1_1 ((uint32_t)0x00000080) /*!< Bit 1 */ + +#define GPIO_CRL_CNF2 ((uint32_t)0x00000C00) /*!< CNF2[1:0] bits (Port x configuration bits, pin 2) */ +#define GPIO_CRL_CNF2_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define GPIO_CRL_CNF2_1 ((uint32_t)0x00000800) /*!< Bit 1 */ + +#define GPIO_CRL_CNF3 ((uint32_t)0x0000C000) /*!< CNF3[1:0] bits (Port x configuration bits, pin 3) */ +#define GPIO_CRL_CNF3_0 ((uint32_t)0x00004000) /*!< Bit 0 */ +#define GPIO_CRL_CNF3_1 ((uint32_t)0x00008000) /*!< Bit 1 */ + +#define GPIO_CRL_CNF4 ((uint32_t)0x000C0000) /*!< CNF4[1:0] bits (Port x configuration bits, pin 4) */ +#define GPIO_CRL_CNF4_0 ((uint32_t)0x00040000) /*!< Bit 0 */ +#define GPIO_CRL_CNF4_1 ((uint32_t)0x00080000) /*!< Bit 1 */ + +#define GPIO_CRL_CNF5 ((uint32_t)0x00C00000) /*!< CNF5[1:0] bits (Port x configuration bits, pin 5) */ +#define GPIO_CRL_CNF5_0 ((uint32_t)0x00400000) /*!< Bit 0 */ +#define GPIO_CRL_CNF5_1 ((uint32_t)0x00800000) /*!< Bit 1 */ + +#define GPIO_CRL_CNF6 ((uint32_t)0x0C000000) /*!< CNF6[1:0] bits (Port x configuration bits, pin 6) */ +#define GPIO_CRL_CNF6_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define GPIO_CRL_CNF6_1 ((uint32_t)0x08000000) /*!< Bit 1 */ + +#define GPIO_CRL_CNF7 ((uint32_t)0xC0000000) /*!< CNF7[1:0] bits (Port x configuration bits, pin 7) */ +#define GPIO_CRL_CNF7_0 ((uint32_t)0x40000000) /*!< Bit 0 */ +#define GPIO_CRL_CNF7_1 ((uint32_t)0x80000000) /*!< Bit 1 */ + +/******************* Bit definition for GPIO_CRH register *******************/ +#define GPIO_CRH_MODE ((uint32_t)0x33333333) /*!< Port x mode bits */ + +#define GPIO_CRH_MODE8 ((uint32_t)0x00000003) /*!< MODE8[1:0] bits (Port x mode bits, pin 8) */ +#define GPIO_CRH_MODE8_0 ((uint32_t)0x00000001) /*!< Bit 0 */ +#define GPIO_CRH_MODE8_1 ((uint32_t)0x00000002) /*!< Bit 1 */ + +#define GPIO_CRH_MODE9 ((uint32_t)0x00000030) /*!< MODE9[1:0] bits (Port x mode bits, pin 9) */ +#define GPIO_CRH_MODE9_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define GPIO_CRH_MODE9_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +#define GPIO_CRH_MODE10 ((uint32_t)0x00000300) /*!< MODE10[1:0] bits (Port x mode bits, pin 10) */ +#define GPIO_CRH_MODE10_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define GPIO_CRH_MODE10_1 ((uint32_t)0x00000200) /*!< Bit 1 */ + +#define GPIO_CRH_MODE11 ((uint32_t)0x00003000) /*!< MODE11[1:0] bits (Port x mode bits, pin 11) */ +#define GPIO_CRH_MODE11_0 ((uint32_t)0x00001000) /*!< Bit 0 */ +#define GPIO_CRH_MODE11_1 ((uint32_t)0x00002000) /*!< Bit 1 */ + +#define GPIO_CRH_MODE12 ((uint32_t)0x00030000) /*!< MODE12[1:0] bits (Port x mode bits, pin 12) */ +#define GPIO_CRH_MODE12_0 ((uint32_t)0x00010000) /*!< Bit 0 */ +#define GPIO_CRH_MODE12_1 ((uint32_t)0x00020000) /*!< Bit 1 */ + +#define GPIO_CRH_MODE13 ((uint32_t)0x00300000) /*!< MODE13[1:0] bits (Port x mode bits, pin 13) */ +#define GPIO_CRH_MODE13_0 ((uint32_t)0x00100000) /*!< Bit 0 */ +#define GPIO_CRH_MODE13_1 ((uint32_t)0x00200000) /*!< Bit 1 */ + +#define GPIO_CRH_MODE14 ((uint32_t)0x03000000) /*!< MODE14[1:0] bits (Port x mode bits, pin 14) */ +#define GPIO_CRH_MODE14_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define GPIO_CRH_MODE14_1 ((uint32_t)0x02000000) /*!< Bit 1 */ + +#define GPIO_CRH_MODE15 ((uint32_t)0x30000000) /*!< MODE15[1:0] bits (Port x mode bits, pin 15) */ +#define GPIO_CRH_MODE15_0 ((uint32_t)0x10000000) /*!< Bit 0 */ +#define GPIO_CRH_MODE15_1 ((uint32_t)0x20000000) /*!< Bit 1 */ + +#define GPIO_CRH_CNF ((uint32_t)0xCCCCCCCC) /*!< Port x configuration bits */ + +#define GPIO_CRH_CNF8 ((uint32_t)0x0000000C) /*!< CNF8[1:0] bits (Port x configuration bits, pin 8) */ +#define GPIO_CRH_CNF8_0 ((uint32_t)0x00000004) /*!< Bit 0 */ +#define GPIO_CRH_CNF8_1 ((uint32_t)0x00000008) /*!< Bit 1 */ + +#define GPIO_CRH_CNF9 ((uint32_t)0x000000C0) /*!< CNF9[1:0] bits (Port x configuration bits, pin 9) */ +#define GPIO_CRH_CNF9_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define GPIO_CRH_CNF9_1 ((uint32_t)0x00000080) /*!< Bit 1 */ + +#define GPIO_CRH_CNF10 ((uint32_t)0x00000C00) /*!< CNF10[1:0] bits (Port x configuration bits, pin 10) */ +#define GPIO_CRH_CNF10_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define GPIO_CRH_CNF10_1 ((uint32_t)0x00000800) /*!< Bit 1 */ + +#define GPIO_CRH_CNF11 ((uint32_t)0x0000C000) /*!< CNF11[1:0] bits (Port x configuration bits, pin 11) */ +#define GPIO_CRH_CNF11_0 ((uint32_t)0x00004000) /*!< Bit 0 */ +#define GPIO_CRH_CNF11_1 ((uint32_t)0x00008000) /*!< Bit 1 */ + +#define GPIO_CRH_CNF12 ((uint32_t)0x000C0000) /*!< CNF12[1:0] bits (Port x configuration bits, pin 12) */ +#define GPIO_CRH_CNF12_0 ((uint32_t)0x00040000) /*!< Bit 0 */ +#define GPIO_CRH_CNF12_1 ((uint32_t)0x00080000) /*!< Bit 1 */ + +#define GPIO_CRH_CNF13 ((uint32_t)0x00C00000) /*!< CNF13[1:0] bits (Port x configuration bits, pin 13) */ +#define GPIO_CRH_CNF13_0 ((uint32_t)0x00400000) /*!< Bit 0 */ +#define GPIO_CRH_CNF13_1 ((uint32_t)0x00800000) /*!< Bit 1 */ + +#define GPIO_CRH_CNF14 ((uint32_t)0x0C000000) /*!< CNF14[1:0] bits (Port x configuration bits, pin 14) */ +#define GPIO_CRH_CNF14_0 ((uint32_t)0x04000000) /*!< Bit 0 */ +#define GPIO_CRH_CNF14_1 ((uint32_t)0x08000000) /*!< Bit 1 */ + +#define GPIO_CRH_CNF15 ((uint32_t)0xC0000000) /*!< CNF15[1:0] bits (Port x configuration bits, pin 15) */ +#define GPIO_CRH_CNF15_0 ((uint32_t)0x40000000) /*!< Bit 0 */ +#define GPIO_CRH_CNF15_1 ((uint32_t)0x80000000) /*!< Bit 1 */ + +/*!<****************** Bit definition for GPIO_IDR register *******************/ +#define GPIO_IDR_IDR0 ((uint16_t)0x0001) /*!< Port input data, bit 0 */ +#define GPIO_IDR_IDR1 ((uint16_t)0x0002) /*!< Port input data, bit 1 */ +#define GPIO_IDR_IDR2 ((uint16_t)0x0004) /*!< Port input data, bit 2 */ +#define GPIO_IDR_IDR3 ((uint16_t)0x0008) /*!< Port input data, bit 3 */ +#define GPIO_IDR_IDR4 ((uint16_t)0x0010) /*!< Port input data, bit 4 */ +#define GPIO_IDR_IDR5 ((uint16_t)0x0020) /*!< Port input data, bit 5 */ +#define GPIO_IDR_IDR6 ((uint16_t)0x0040) /*!< Port input data, bit 6 */ +#define GPIO_IDR_IDR7 ((uint16_t)0x0080) /*!< Port input data, bit 7 */ +#define GPIO_IDR_IDR8 ((uint16_t)0x0100) /*!< Port input data, bit 8 */ +#define GPIO_IDR_IDR9 ((uint16_t)0x0200) /*!< Port input data, bit 9 */ +#define GPIO_IDR_IDR10 ((uint16_t)0x0400) /*!< Port input data, bit 10 */ +#define GPIO_IDR_IDR11 ((uint16_t)0x0800) /*!< Port input data, bit 11 */ +#define GPIO_IDR_IDR12 ((uint16_t)0x1000) /*!< Port input data, bit 12 */ +#define GPIO_IDR_IDR13 ((uint16_t)0x2000) /*!< Port input data, bit 13 */ +#define GPIO_IDR_IDR14 ((uint16_t)0x4000) /*!< Port input data, bit 14 */ +#define GPIO_IDR_IDR15 ((uint16_t)0x8000) /*!< Port input data, bit 15 */ + +/******************* Bit definition for GPIO_ODR register *******************/ +#define GPIO_ODR_ODR0 ((uint16_t)0x0001) /*!< Port output data, bit 0 */ +#define GPIO_ODR_ODR1 ((uint16_t)0x0002) /*!< Port output data, bit 1 */ +#define GPIO_ODR_ODR2 ((uint16_t)0x0004) /*!< Port output data, bit 2 */ +#define GPIO_ODR_ODR3 ((uint16_t)0x0008) /*!< Port output data, bit 3 */ +#define GPIO_ODR_ODR4 ((uint16_t)0x0010) /*!< Port output data, bit 4 */ +#define GPIO_ODR_ODR5 ((uint16_t)0x0020) /*!< Port output data, bit 5 */ +#define GPIO_ODR_ODR6 ((uint16_t)0x0040) /*!< Port output data, bit 6 */ +#define GPIO_ODR_ODR7 ((uint16_t)0x0080) /*!< Port output data, bit 7 */ +#define GPIO_ODR_ODR8 ((uint16_t)0x0100) /*!< Port output data, bit 8 */ +#define GPIO_ODR_ODR9 ((uint16_t)0x0200) /*!< Port output data, bit 9 */ +#define GPIO_ODR_ODR10 ((uint16_t)0x0400) /*!< Port output data, bit 10 */ +#define GPIO_ODR_ODR11 ((uint16_t)0x0800) /*!< Port output data, bit 11 */ +#define GPIO_ODR_ODR12 ((uint16_t)0x1000) /*!< Port output data, bit 12 */ +#define GPIO_ODR_ODR13 ((uint16_t)0x2000) /*!< Port output data, bit 13 */ +#define GPIO_ODR_ODR14 ((uint16_t)0x4000) /*!< Port output data, bit 14 */ +#define GPIO_ODR_ODR15 ((uint16_t)0x8000) /*!< Port output data, bit 15 */ + +/****************** Bit definition for GPIO_BSRR register *******************/ +#define GPIO_BSRR_BS0 ((uint32_t)0x00000001) /*!< Port x Set bit 0 */ +#define GPIO_BSRR_BS1 ((uint32_t)0x00000002) /*!< Port x Set bit 1 */ +#define GPIO_BSRR_BS2 ((uint32_t)0x00000004) /*!< Port x Set bit 2 */ +#define GPIO_BSRR_BS3 ((uint32_t)0x00000008) /*!< Port x Set bit 3 */ +#define GPIO_BSRR_BS4 ((uint32_t)0x00000010) /*!< Port x Set bit 4 */ +#define GPIO_BSRR_BS5 ((uint32_t)0x00000020) /*!< Port x Set bit 5 */ +#define GPIO_BSRR_BS6 ((uint32_t)0x00000040) /*!< Port x Set bit 6 */ +#define GPIO_BSRR_BS7 ((uint32_t)0x00000080) /*!< Port x Set bit 7 */ +#define GPIO_BSRR_BS8 ((uint32_t)0x00000100) /*!< Port x Set bit 8 */ +#define GPIO_BSRR_BS9 ((uint32_t)0x00000200) /*!< Port x Set bit 9 */ +#define GPIO_BSRR_BS10 ((uint32_t)0x00000400) /*!< Port x Set bit 10 */ +#define GPIO_BSRR_BS11 ((uint32_t)0x00000800) /*!< Port x Set bit 11 */ +#define GPIO_BSRR_BS12 ((uint32_t)0x00001000) /*!< Port x Set bit 12 */ +#define GPIO_BSRR_BS13 ((uint32_t)0x00002000) /*!< Port x Set bit 13 */ +#define GPIO_BSRR_BS14 ((uint32_t)0x00004000) /*!< Port x Set bit 14 */ +#define GPIO_BSRR_BS15 ((uint32_t)0x00008000) /*!< Port x Set bit 15 */ + +#define GPIO_BSRR_BR0 ((uint32_t)0x00010000) /*!< Port x Reset bit 0 */ +#define GPIO_BSRR_BR1 ((uint32_t)0x00020000) /*!< Port x Reset bit 1 */ +#define GPIO_BSRR_BR2 ((uint32_t)0x00040000) /*!< Port x Reset bit 2 */ +#define GPIO_BSRR_BR3 ((uint32_t)0x00080000) /*!< Port x Reset bit 3 */ +#define GPIO_BSRR_BR4 ((uint32_t)0x00100000) /*!< Port x Reset bit 4 */ +#define GPIO_BSRR_BR5 ((uint32_t)0x00200000) /*!< Port x Reset bit 5 */ +#define GPIO_BSRR_BR6 ((uint32_t)0x00400000) /*!< Port x Reset bit 6 */ +#define GPIO_BSRR_BR7 ((uint32_t)0x00800000) /*!< Port x Reset bit 7 */ +#define GPIO_BSRR_BR8 ((uint32_t)0x01000000) /*!< Port x Reset bit 8 */ +#define GPIO_BSRR_BR9 ((uint32_t)0x02000000) /*!< Port x Reset bit 9 */ +#define GPIO_BSRR_BR10 ((uint32_t)0x04000000) /*!< Port x Reset bit 10 */ +#define GPIO_BSRR_BR11 ((uint32_t)0x08000000) /*!< Port x Reset bit 11 */ +#define GPIO_BSRR_BR12 ((uint32_t)0x10000000) /*!< Port x Reset bit 12 */ +#define GPIO_BSRR_BR13 ((uint32_t)0x20000000) /*!< Port x Reset bit 13 */ +#define GPIO_BSRR_BR14 ((uint32_t)0x40000000) /*!< Port x Reset bit 14 */ +#define GPIO_BSRR_BR15 ((uint32_t)0x80000000) /*!< Port x Reset bit 15 */ + +/******************* Bit definition for GPIO_BRR register *******************/ +#define GPIO_BRR_BR0 ((uint16_t)0x0001) /*!< Port x Reset bit 0 */ +#define GPIO_BRR_BR1 ((uint16_t)0x0002) /*!< Port x Reset bit 1 */ +#define GPIO_BRR_BR2 ((uint16_t)0x0004) /*!< Port x Reset bit 2 */ +#define GPIO_BRR_BR3 ((uint16_t)0x0008) /*!< Port x Reset bit 3 */ +#define GPIO_BRR_BR4 ((uint16_t)0x0010) /*!< Port x Reset bit 4 */ +#define GPIO_BRR_BR5 ((uint16_t)0x0020) /*!< Port x Reset bit 5 */ +#define GPIO_BRR_BR6 ((uint16_t)0x0040) /*!< Port x Reset bit 6 */ +#define GPIO_BRR_BR7 ((uint16_t)0x0080) /*!< Port x Reset bit 7 */ +#define GPIO_BRR_BR8 ((uint16_t)0x0100) /*!< Port x Reset bit 8 */ +#define GPIO_BRR_BR9 ((uint16_t)0x0200) /*!< Port x Reset bit 9 */ +#define GPIO_BRR_BR10 ((uint16_t)0x0400) /*!< Port x Reset bit 10 */ +#define GPIO_BRR_BR11 ((uint16_t)0x0800) /*!< Port x Reset bit 11 */ +#define GPIO_BRR_BR12 ((uint16_t)0x1000) /*!< Port x Reset bit 12 */ +#define GPIO_BRR_BR13 ((uint16_t)0x2000) /*!< Port x Reset bit 13 */ +#define GPIO_BRR_BR14 ((uint16_t)0x4000) /*!< Port x Reset bit 14 */ +#define GPIO_BRR_BR15 ((uint16_t)0x8000) /*!< Port x Reset bit 15 */ + +/****************** Bit definition for GPIO_LCKR register *******************/ +#define GPIO_LCKR_LCK0 ((uint32_t)0x00000001) /*!< Port x Lock bit 0 */ +#define GPIO_LCKR_LCK1 ((uint32_t)0x00000002) /*!< Port x Lock bit 1 */ +#define GPIO_LCKR_LCK2 ((uint32_t)0x00000004) /*!< Port x Lock bit 2 */ +#define GPIO_LCKR_LCK3 ((uint32_t)0x00000008) /*!< Port x Lock bit 3 */ +#define GPIO_LCKR_LCK4 ((uint32_t)0x00000010) /*!< Port x Lock bit 4 */ +#define GPIO_LCKR_LCK5 ((uint32_t)0x00000020) /*!< Port x Lock bit 5 */ +#define GPIO_LCKR_LCK6 ((uint32_t)0x00000040) /*!< Port x Lock bit 6 */ +#define GPIO_LCKR_LCK7 ((uint32_t)0x00000080) /*!< Port x Lock bit 7 */ +#define GPIO_LCKR_LCK8 ((uint32_t)0x00000100) /*!< Port x Lock bit 8 */ +#define GPIO_LCKR_LCK9 ((uint32_t)0x00000200) /*!< Port x Lock bit 9 */ +#define GPIO_LCKR_LCK10 ((uint32_t)0x00000400) /*!< Port x Lock bit 10 */ +#define GPIO_LCKR_LCK11 ((uint32_t)0x00000800) /*!< Port x Lock bit 11 */ +#define GPIO_LCKR_LCK12 ((uint32_t)0x00001000) /*!< Port x Lock bit 12 */ +#define GPIO_LCKR_LCK13 ((uint32_t)0x00002000) /*!< Port x Lock bit 13 */ +#define GPIO_LCKR_LCK14 ((uint32_t)0x00004000) /*!< Port x Lock bit 14 */ +#define GPIO_LCKR_LCK15 ((uint32_t)0x00008000) /*!< Port x Lock bit 15 */ +#define GPIO_LCKR_LCKK ((uint32_t)0x00010000) /*!< Lock key */ + +/*----------------------------------------------------------------------------*/ + +/****************** Bit definition for AFIO_EVCR register *******************/ +#define AFIO_EVCR_PIN ((uint8_t)0x0F) /*!< PIN[3:0] bits (Pin selection) */ +#define AFIO_EVCR_PIN_0 ((uint8_t)0x01) /*!< Bit 0 */ +#define AFIO_EVCR_PIN_1 ((uint8_t)0x02) /*!< Bit 1 */ +#define AFIO_EVCR_PIN_2 ((uint8_t)0x04) /*!< Bit 2 */ +#define AFIO_EVCR_PIN_3 ((uint8_t)0x08) /*!< Bit 3 */ + +/*!< PIN configuration */ +#define AFIO_EVCR_PIN_PX0 ((uint8_t)0x00) /*!< Pin 0 selected */ +#define AFIO_EVCR_PIN_PX1 ((uint8_t)0x01) /*!< Pin 1 selected */ +#define AFIO_EVCR_PIN_PX2 ((uint8_t)0x02) /*!< Pin 2 selected */ +#define AFIO_EVCR_PIN_PX3 ((uint8_t)0x03) /*!< Pin 3 selected */ +#define AFIO_EVCR_PIN_PX4 ((uint8_t)0x04) /*!< Pin 4 selected */ +#define AFIO_EVCR_PIN_PX5 ((uint8_t)0x05) /*!< Pin 5 selected */ +#define AFIO_EVCR_PIN_PX6 ((uint8_t)0x06) /*!< Pin 6 selected */ +#define AFIO_EVCR_PIN_PX7 ((uint8_t)0x07) /*!< Pin 7 selected */ +#define AFIO_EVCR_PIN_PX8 ((uint8_t)0x08) /*!< Pin 8 selected */ +#define AFIO_EVCR_PIN_PX9 ((uint8_t)0x09) /*!< Pin 9 selected */ +#define AFIO_EVCR_PIN_PX10 ((uint8_t)0x0A) /*!< Pin 10 selected */ +#define AFIO_EVCR_PIN_PX11 ((uint8_t)0x0B) /*!< Pin 11 selected */ +#define AFIO_EVCR_PIN_PX12 ((uint8_t)0x0C) /*!< Pin 12 selected */ +#define AFIO_EVCR_PIN_PX13 ((uint8_t)0x0D) /*!< Pin 13 selected */ +#define AFIO_EVCR_PIN_PX14 ((uint8_t)0x0E) /*!< Pin 14 selected */ +#define AFIO_EVCR_PIN_PX15 ((uint8_t)0x0F) /*!< Pin 15 selected */ + +#define AFIO_EVCR_PORT ((uint8_t)0x70) /*!< PORT[2:0] bits (Port selection) */ +#define AFIO_EVCR_PORT_0 ((uint8_t)0x10) /*!< Bit 0 */ +#define AFIO_EVCR_PORT_1 ((uint8_t)0x20) /*!< Bit 1 */ +#define AFIO_EVCR_PORT_2 ((uint8_t)0x40) /*!< Bit 2 */ + +/*!< PORT configuration */ +#define AFIO_EVCR_PORT_PA ((uint8_t)0x00) /*!< Port A selected */ +#define AFIO_EVCR_PORT_PB ((uint8_t)0x10) /*!< Port B selected */ +#define AFIO_EVCR_PORT_PC ((uint8_t)0x20) /*!< Port C selected */ +#define AFIO_EVCR_PORT_PD ((uint8_t)0x30) /*!< Port D selected */ +#define AFIO_EVCR_PORT_PE ((uint8_t)0x40) /*!< Port E selected */ + +#define AFIO_EVCR_EVOE ((uint8_t)0x80) /*!< Event Output Enable */ + +/****************** Bit definition for AFIO_MAPR register *******************/ +#define AFIO_MAPR_SPI1_REMAP ((uint32_t)0x00000001) /*!< SPI1 remapping */ +#define AFIO_MAPR_I2C1_REMAP ((uint32_t)0x00000002) /*!< I2C1 remapping */ +#define AFIO_MAPR_USART1_REMAP ((uint32_t)0x00000004) /*!< USART1 remapping */ +#define AFIO_MAPR_USART2_REMAP ((uint32_t)0x00000008) /*!< USART2 remapping */ + +#define AFIO_MAPR_USART3_REMAP ((uint32_t)0x00000030) /*!< USART3_REMAP[1:0] bits (USART3 remapping) */ +#define AFIO_MAPR_USART3_REMAP_0 ((uint32_t)0x00000010) /*!< Bit 0 */ +#define AFIO_MAPR_USART3_REMAP_1 ((uint32_t)0x00000020) /*!< Bit 1 */ + +/* USART3_REMAP configuration */ +#define AFIO_MAPR_USART3_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (TX/PB10, RX/PB11, CK/PB12, CTS/PB13, RTS/PB14) */ +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP ((uint32_t)0x00000010) /*!< Partial remap (TX/PC10, RX/PC11, CK/PC12, CTS/PB13, RTS/PB14) */ +#define AFIO_MAPR_USART3_REMAP_FULLREMAP ((uint32_t)0x00000030) /*!< Full remap (TX/PD8, RX/PD9, CK/PD10, CTS/PD11, RTS/PD12) */ + +#define AFIO_MAPR_TIM1_REMAP ((uint32_t)0x000000C0) /*!< TIM1_REMAP[1:0] bits (TIM1 remapping) */ +#define AFIO_MAPR_TIM1_REMAP_0 ((uint32_t)0x00000040) /*!< Bit 0 */ +#define AFIO_MAPR_TIM1_REMAP_1 ((uint32_t)0x00000080) /*!< Bit 1 */ + +/*!< TIM1_REMAP configuration */ +#define AFIO_MAPR_TIM1_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PB12, CH1N/PB13, CH2N/PB14, CH3N/PB15) */ +#define AFIO_MAPR_TIM1_REMAP_PARTIALREMAP ((uint32_t)0x00000040) /*!< Partial remap (ETR/PA12, CH1/PA8, CH2/PA9, CH3/PA10, CH4/PA11, BKIN/PA6, CH1N/PA7, CH2N/PB0, CH3N/PB1) */ +#define AFIO_MAPR_TIM1_REMAP_FULLREMAP ((uint32_t)0x000000C0) /*!< Full remap (ETR/PE7, CH1/PE9, CH2/PE11, CH3/PE13, CH4/PE14, BKIN/PE15, CH1N/PE8, CH2N/PE10, CH3N/PE12) */ + +#define AFIO_MAPR_TIM2_REMAP ((uint32_t)0x00000300) /*!< TIM2_REMAP[1:0] bits (TIM2 remapping) */ +#define AFIO_MAPR_TIM2_REMAP_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define AFIO_MAPR_TIM2_REMAP_1 ((uint32_t)0x00000200) /*!< Bit 1 */ + +/*!< TIM2_REMAP configuration */ +#define AFIO_MAPR_TIM2_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (CH1/ETR/PA0, CH2/PA1, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP1 ((uint32_t)0x00000100) /*!< Partial remap (CH1/ETR/PA15, CH2/PB3, CH3/PA2, CH4/PA3) */ +#define AFIO_MAPR_TIM2_REMAP_PARTIALREMAP2 ((uint32_t)0x00000200) /*!< Partial remap (CH1/ETR/PA0, CH2/PA1, CH3/PB10, CH4/PB11) */ +#define AFIO_MAPR_TIM2_REMAP_FULLREMAP ((uint32_t)0x00000300) /*!< Full remap (CH1/ETR/PA15, CH2/PB3, CH3/PB10, CH4/PB11) */ + +#define AFIO_MAPR_TIM3_REMAP ((uint32_t)0x00000C00) /*!< TIM3_REMAP[1:0] bits (TIM3 remapping) */ +#define AFIO_MAPR_TIM3_REMAP_0 ((uint32_t)0x00000400) /*!< Bit 0 */ +#define AFIO_MAPR_TIM3_REMAP_1 ((uint32_t)0x00000800) /*!< Bit 1 */ + +/*!< TIM3_REMAP configuration */ +#define AFIO_MAPR_TIM3_REMAP_NOREMAP ((uint32_t)0x00000000) /*!< No remap (CH1/PA6, CH2/PA7, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_PARTIALREMAP ((uint32_t)0x00000800) /*!< Partial remap (CH1/PB4, CH2/PB5, CH3/PB0, CH4/PB1) */ +#define AFIO_MAPR_TIM3_REMAP_FULLREMAP ((uint32_t)0x00000C00) /*!< Full remap (CH1/PC6, CH2/PC7, CH3/PC8, CH4/PC9) */ + +#define AFIO_MAPR_TIM4_REMAP ((uint32_t)0x00001000) /*!< TIM4_REMAP bit (TIM4 remapping) */ + +#define AFIO_MAPR_CAN_REMAP ((uint32_t)0x00006000) /*!< CAN_REMAP[1:0] bits (CAN Alternate function remapping) */ +#define AFIO_MAPR_CAN_REMAP_0 ((uint32_t)0x00002000) /*!< Bit 0 */ +#define AFIO_MAPR_CAN_REMAP_1 ((uint32_t)0x00004000) /*!< Bit 1 */ + +/*!< CAN_REMAP configuration */ +#define AFIO_MAPR_CAN_REMAP_REMAP1 ((uint32_t)0x00000000) /*!< CANRX mapped to PA11, CANTX mapped to PA12 */ +#define AFIO_MAPR_CAN_REMAP_REMAP2 ((uint32_t)0x00004000) /*!< CANRX mapped to PB8, CANTX mapped to PB9 */ +#define AFIO_MAPR_CAN_REMAP_REMAP3 ((uint32_t)0x00006000) /*!< CANRX mapped to PD0, CANTX mapped to PD1 */ + +#define AFIO_MAPR_PD01_REMAP ((uint32_t)0x00008000) /*!< Port D0/Port D1 mapping on OSC_IN/OSC_OUT */ +#define AFIO_MAPR_TIM5CH4_IREMAP ((uint32_t)0x00010000) /*!< TIM5 Channel4 Internal Remap */ +#define AFIO_MAPR_ADC1_ETRGINJ_REMAP ((uint32_t)0x00020000) /*!< ADC 1 External Trigger Injected Conversion remapping */ +#define AFIO_MAPR_ADC1_ETRGREG_REMAP ((uint32_t)0x00040000) /*!< ADC 1 External Trigger Regular Conversion remapping */ +#define AFIO_MAPR_ADC2_ETRGINJ_REMAP ((uint32_t)0x00080000) /*!< ADC 2 External Trigger Injected Conversion remapping */ +#define AFIO_MAPR_ADC2_ETRGREG_REMAP ((uint32_t)0x00100000) /*!< ADC 2 External Trigger Regular Conversion remapping */ + +/*!< SWJ_CFG configuration */ +#define AFIO_MAPR_SWJ_CFG ((uint32_t)0x07000000) /*!< SWJ_CFG[2:0] bits (Serial Wire JTAG configuration) */ +#define AFIO_MAPR_SWJ_CFG_0 ((uint32_t)0x01000000) /*!< Bit 0 */ +#define AFIO_MAPR_SWJ_CFG_1 ((uint32_t)0x02000000) /*!< Bit 1 */ +#define AFIO_MAPR_SWJ_CFG_2 ((uint32_t)0x04000000) /*!< Bit 2 */ + +#define AFIO_MAPR_SWJ_CFG_RESET ((uint32_t)0x00000000) /*!< Full SWJ (JTAG-DP + SW-DP) : Reset State */ +#define AFIO_MAPR_SWJ_CFG_NOJNTRST ((uint32_t)0x01000000) /*!< Full SWJ (JTAG-DP + SW-DP) but without JNTRST */ +#define AFIO_MAPR_SWJ_CFG_JTAGDISABLE ((uint32_t)0x02000000) /*!< JTAG-DP Disabled and SW-DP Enabled */ +#define AFIO_MAPR_SWJ_CFG_DISABLE ((uint32_t)0x04000000) /*!< JTAG-DP Disabled and SW-DP Disabled */ + +#ifdef STM32F10X_CL +/*!< ETH_REMAP configuration */ + #define AFIO_MAPR_ETH_REMAP ((uint32_t)0x00200000) /*!< SPI3_REMAP bit (Ethernet MAC I/O remapping) */ + +/*!< CAN2_REMAP configuration */ + #define AFIO_MAPR_CAN2_REMAP ((uint32_t)0x00400000) /*!< CAN2_REMAP bit (CAN2 I/O remapping) */ + +/*!< MII_RMII_SEL configuration */ + #define AFIO_MAPR_MII_RMII_SEL ((uint32_t)0x00800000) /*!< MII_RMII_SEL bit (Ethernet MII or RMII selection) */ + +/*!< SPI3_REMAP configuration */ + #define AFIO_MAPR_SPI3_REMAP ((uint32_t)0x10000000) /*!< SPI3_REMAP bit (SPI3 remapping) */ + +/*!< TIM2ITR1_IREMAP configuration */ + #define AFIO_MAPR_TIM2ITR1_IREMAP ((uint32_t)0x20000000) /*!< TIM2ITR1_IREMAP bit (TIM2 internal trigger 1 remapping) */ + +/*!< PTP_PPS_REMAP configuration */ + #define AFIO_MAPR_PTP_PPS_REMAP ((uint32_t)0x20000000) /*!< PTP_PPS_REMAP bit (Ethernet PTP PPS remapping) */ +#endif + +/***************** Bit definition for AFIO_EXTICR1 register *****************/ +#define AFIO_EXTICR1_EXTI0 ((uint16_t)0x000F) /*!< EXTI 0 configuration */ +#define AFIO_EXTICR1_EXTI1 ((uint16_t)0x00F0) /*!< EXTI 1 configuration */ +#define AFIO_EXTICR1_EXTI2 ((uint16_t)0x0F00) /*!< EXTI 2 configuration */ +#define AFIO_EXTICR1_EXTI3 ((uint16_t)0xF000) /*!< EXTI 3 configuration */ + +/*!< EXTI0 configuration */ +#define AFIO_EXTICR1_EXTI0_PA ((uint16_t)0x0000) /*!< PA[0] pin */ +#define AFIO_EXTICR1_EXTI0_PB ((uint16_t)0x0001) /*!< PB[0] pin */ +#define AFIO_EXTICR1_EXTI0_PC ((uint16_t)0x0002) /*!< PC[0] pin */ +#define AFIO_EXTICR1_EXTI0_PD ((uint16_t)0x0003) /*!< PD[0] pin */ +#define AFIO_EXTICR1_EXTI0_PE ((uint16_t)0x0004) /*!< PE[0] pin */ +#define AFIO_EXTICR1_EXTI0_PF ((uint16_t)0x0005) /*!< PF[0] pin */ +#define AFIO_EXTICR1_EXTI0_PG ((uint16_t)0x0006) /*!< PG[0] pin */ + +/*!< EXTI1 configuration */ +#define AFIO_EXTICR1_EXTI1_PA ((uint16_t)0x0000) /*!< PA[1] pin */ +#define AFIO_EXTICR1_EXTI1_PB ((uint16_t)0x0010) /*!< PB[1] pin */ +#define AFIO_EXTICR1_EXTI1_PC ((uint16_t)0x0020) /*!< PC[1] pin */ +#define AFIO_EXTICR1_EXTI1_PD ((uint16_t)0x0030) /*!< PD[1] pin */ +#define AFIO_EXTICR1_EXTI1_PE ((uint16_t)0x0040) /*!< PE[1] pin */ +#define AFIO_EXTICR1_EXTI1_PF ((uint16_t)0x0050) /*!< PF[1] pin */ +#define AFIO_EXTICR1_EXTI1_PG ((uint16_t)0x0060) /*!< PG[1] pin */ + +/*!< EXTI2 configuration */ +#define AFIO_EXTICR1_EXTI2_PA ((uint16_t)0x0000) /*!< PA[2] pin */ +#define AFIO_EXTICR1_EXTI2_PB ((uint16_t)0x0100) /*!< PB[2] pin */ +#define AFIO_EXTICR1_EXTI2_PC ((uint16_t)0x0200) /*!< PC[2] pin */ +#define AFIO_EXTICR1_EXTI2_PD ((uint16_t)0x0300) /*!< PD[2] pin */ +#define AFIO_EXTICR1_EXTI2_PE ((uint16_t)0x0400) /*!< PE[2] pin */ +#define AFIO_EXTICR1_EXTI2_PF ((uint16_t)0x0500) /*!< PF[2] pin */ +#define AFIO_EXTICR1_EXTI2_PG ((uint16_t)0x0600) /*!< PG[2] pin */ + +/*!< EXTI3 configuration */ +#define AFIO_EXTICR1_EXTI3_PA ((uint16_t)0x0000) /*!< PA[3] pin */ +#define AFIO_EXTICR1_EXTI3_PB ((uint16_t)0x1000) /*!< PB[3] pin */ +#define AFIO_EXTICR1_EXTI3_PC ((uint16_t)0x2000) /*!< PC[3] pin */ +#define AFIO_EXTICR1_EXTI3_PD ((uint16_t)0x3000) /*!< PD[3] pin */ +#define AFIO_EXTICR1_EXTI3_PE ((uint16_t)0x4000) /*!< PE[3] pin */ +#define AFIO_EXTICR1_EXTI3_PF ((uint16_t)0x5000) /*!< PF[3] pin */ +#define AFIO_EXTICR1_EXTI3_PG ((uint16_t)0x6000) /*!< PG[3] pin */ + +/***************** Bit definition for AFIO_EXTICR2 register *****************/ +#define AFIO_EXTICR2_EXTI4 ((uint16_t)0x000F) /*!< EXTI 4 configuration */ +#define AFIO_EXTICR2_EXTI5 ((uint16_t)0x00F0) /*!< EXTI 5 configuration */ +#define AFIO_EXTICR2_EXTI6 ((uint16_t)0x0F00) /*!< EXTI 6 configuration */ +#define AFIO_EXTICR2_EXTI7 ((uint16_t)0xF000) /*!< EXTI 7 configuration */ + +/*!< EXTI4 configuration */ +#define AFIO_EXTICR2_EXTI4_PA ((uint16_t)0x0000) /*!< PA[4] pin */ +#define AFIO_EXTICR2_EXTI4_PB ((uint16_t)0x0001) /*!< PB[4] pin */ +#define AFIO_EXTICR2_EXTI4_PC ((uint16_t)0x0002) /*!< PC[4] pin */ +#define AFIO_EXTICR2_EXTI4_PD ((uint16_t)0x0003) /*!< PD[4] pin */ +#define AFIO_EXTICR2_EXTI4_PE ((uint16_t)0x0004) /*!< PE[4] pin */ +#define AFIO_EXTICR2_EXTI4_PF ((uint16_t)0x0005) /*!< PF[4] pin */ +#define AFIO_EXTICR2_EXTI4_PG ((uint16_t)0x0006) /*!< PG[4] pin */ + +/* EXTI5 configuration */ +#define AFIO_EXTICR2_EXTI5_PA ((uint16_t)0x0000) /*!< PA[5] pin */ +#define AFIO_EXTICR2_EXTI5_PB ((uint16_t)0x0010) /*!< PB[5] pin */ +#define AFIO_EXTICR2_EXTI5_PC ((uint16_t)0x0020) /*!< PC[5] pin */ +#define AFIO_EXTICR2_EXTI5_PD ((uint16_t)0x0030) /*!< PD[5] pin */ +#define AFIO_EXTICR2_EXTI5_PE ((uint16_t)0x0040) /*!< PE[5] pin */ +#define AFIO_EXTICR2_EXTI5_PF ((uint16_t)0x0050) /*!< PF[5] pin */ +#define AFIO_EXTICR2_EXTI5_PG ((uint16_t)0x0060) /*!< PG[5] pin */ + +/*!< EXTI6 configuration */ +#define AFIO_EXTICR2_EXTI6_PA ((uint16_t)0x0000) /*!< PA[6] pin */ +#define AFIO_EXTICR2_EXTI6_PB ((uint16_t)0x0100) /*!< PB[6] pin */ +#define AFIO_EXTICR2_EXTI6_PC ((uint16_t)0x0200) /*!< PC[6] pin */ +#define AFIO_EXTICR2_EXTI6_PD ((uint16_t)0x0300) /*!< PD[6] pin */ +#define AFIO_EXTICR2_EXTI6_PE ((uint16_t)0x0400) /*!< PE[6] pin */ +#define AFIO_EXTICR2_EXTI6_PF ((uint16_t)0x0500) /*!< PF[6] pin */ +#define AFIO_EXTICR2_EXTI6_PG ((uint16_t)0x0600) /*!< PG[6] pin */ + +/*!< EXTI7 configuration */ +#define AFIO_EXTICR2_EXTI7_PA ((uint16_t)0x0000) /*!< PA[7] pin */ +#define AFIO_EXTICR2_EXTI7_PB ((uint16_t)0x1000) /*!< PB[7] pin */ +#define AFIO_EXTICR2_EXTI7_PC ((uint16_t)0x2000) /*!< PC[7] pin */ +#define AFIO_EXTICR2_EXTI7_PD ((uint16_t)0x3000) /*!< PD[7] pin */ +#define AFIO_EXTICR2_EXTI7_PE ((uint16_t)0x4000) /*!< PE[7] pin */ +#define AFIO_EXTICR2_EXTI7_PF ((uint16_t)0x5000) /*!< PF[7] pin */ +#define AFIO_EXTICR2_EXTI7_PG ((uint16_t)0x6000) /*!< PG[7] pin */ + +/***************** Bit definition for AFIO_EXTICR3 register *****************/ +#define AFIO_EXTICR3_EXTI8 ((uint16_t)0x000F) /*!< EXTI 8 configuration */ +#define AFIO_EXTICR3_EXTI9 ((uint16_t)0x00F0) /*!< EXTI 9 configuration */ +#define AFIO_EXTICR3_EXTI10 ((uint16_t)0x0F00) /*!< EXTI 10 configuration */ +#define AFIO_EXTICR3_EXTI11 ((uint16_t)0xF000) /*!< EXTI 11 configuration */ + +/*!< EXTI8 configuration */ +#define AFIO_EXTICR3_EXTI8_PA ((uint16_t)0x0000) /*!< PA[8] pin */ +#define AFIO_EXTICR3_EXTI8_PB ((uint16_t)0x0001) /*!< PB[8] pin */ +#define AFIO_EXTICR3_EXTI8_PC ((uint16_t)0x0002) /*!< PC[8] pin */ +#define AFIO_EXTICR3_EXTI8_PD ((uint16_t)0x0003) /*!< PD[8] pin */ +#define AFIO_EXTICR3_EXTI8_PE ((uint16_t)0x0004) /*!< PE[8] pin */ +#define AFIO_EXTICR3_EXTI8_PF ((uint16_t)0x0005) /*!< PF[8] pin */ +#define AFIO_EXTICR3_EXTI8_PG ((uint16_t)0x0006) /*!< PG[8] pin */ + +/*!< EXTI9 configuration */ +#define AFIO_EXTICR3_EXTI9_PA ((uint16_t)0x0000) /*!< PA[9] pin */ +#define AFIO_EXTICR3_EXTI9_PB ((uint16_t)0x0010) /*!< PB[9] pin */ +#define AFIO_EXTICR3_EXTI9_PC ((uint16_t)0x0020) /*!< PC[9] pin */ +#define AFIO_EXTICR3_EXTI9_PD ((uint16_t)0x0030) /*!< PD[9] pin */ +#define AFIO_EXTICR3_EXTI9_PE ((uint16_t)0x0040) /*!< PE[9] pin */ +#define AFIO_EXTICR3_EXTI9_PF ((uint16_t)0x0050) /*!< PF[9] pin */ +#define AFIO_EXTICR3_EXTI9_PG ((uint16_t)0x0060) /*!< PG[9] pin */ + +/*!< EXTI10 configuration */ +#define AFIO_EXTICR3_EXTI10_PA ((uint16_t)0x0000) /*!< PA[10] pin */ +#define AFIO_EXTICR3_EXTI10_PB ((uint16_t)0x0100) /*!< PB[10] pin */ +#define AFIO_EXTICR3_EXTI10_PC ((uint16_t)0x0200) /*!< PC[10] pin */ +#define AFIO_EXTICR3_EXTI10_PD ((uint16_t)0x0300) /*!< PD[10] pin */ +#define AFIO_EXTICR3_EXTI10_PE ((uint16_t)0x0400) /*!< PE[10] pin */ +#define AFIO_EXTICR3_EXTI10_PF ((uint16_t)0x0500) /*!< PF[10] pin */ +#define AFIO_EXTICR3_EXTI10_PG ((uint16_t)0x0600) /*!< PG[10] pin */ + +/*!< EXTI11 configuration */ +#define AFIO_EXTICR3_EXTI11_PA ((uint16_t)0x0000) /*!< PA[11] pin */ +#define AFIO_EXTICR3_EXTI11_PB ((uint16_t)0x1000) /*!< PB[11] pin */ +#define AFIO_EXTICR3_EXTI11_PC ((uint16_t)0x2000) /*!< PC[11] pin */ +#define AFIO_EXTICR3_EXTI11_PD ((uint16_t)0x3000) /*!< PD[11] pin */ +#define AFIO_EXTICR3_EXTI11_PE ((uint16_t)0x4000) /*!< PE[11] pin */ +#define AFIO_EXTICR3_EXTI11_PF ((uint16_t)0x5000) /*!< PF[11] pin */ +#define AFIO_EXTICR3_EXTI11_PG ((uint16_t)0x6000) /*!< PG[11] pin */ + +/***************** Bit definition for AFIO_EXTICR4 register *****************/ +#define AFIO_EXTICR4_EXTI12 ((uint16_t)0x000F) /*!< EXTI 12 configuration */ +#define AFIO_EXTICR4_EXTI13 ((uint16_t)0x00F0) /*!< EXTI 13 configuration */ +#define AFIO_EXTICR4_EXTI14 ((uint16_t)0x0F00) /*!< EXTI 14 configuration */ +#define AFIO_EXTICR4_EXTI15 ((uint16_t)0xF000) /*!< EXTI 15 configuration */ + +/* EXTI12 configuration */ +#define AFIO_EXTICR4_EXTI12_PA ((uint16_t)0x0000) /*!< PA[12] pin */ +#define AFIO_EXTICR4_EXTI12_PB ((uint16_t)0x0001) /*!< PB[12] pin */ +#define AFIO_EXTICR4_EXTI12_PC ((uint16_t)0x0002) /*!< PC[12] pin */ +#define AFIO_EXTICR4_EXTI12_PD ((uint16_t)0x0003) /*!< PD[12] pin */ +#define AFIO_EXTICR4_EXTI12_PE ((uint16_t)0x0004) /*!< PE[12] pin */ +#define AFIO_EXTICR4_EXTI12_PF ((uint16_t)0x0005) /*!< PF[12] pin */ +#define AFIO_EXTICR4_EXTI12_PG ((uint16_t)0x0006) /*!< PG[12] pin */ + +/* EXTI13 configuration */ +#define AFIO_EXTICR4_EXTI13_PA ((uint16_t)0x0000) /*!< PA[13] pin */ +#define AFIO_EXTICR4_EXTI13_PB ((uint16_t)0x0010) /*!< PB[13] pin */ +#define AFIO_EXTICR4_EXTI13_PC ((uint16_t)0x0020) /*!< PC[13] pin */ +#define AFIO_EXTICR4_EXTI13_PD ((uint16_t)0x0030) /*!< PD[13] pin */ +#define AFIO_EXTICR4_EXTI13_PE ((uint16_t)0x0040) /*!< PE[13] pin */ +#define AFIO_EXTICR4_EXTI13_PF ((uint16_t)0x0050) /*!< PF[13] pin */ +#define AFIO_EXTICR4_EXTI13_PG ((uint16_t)0x0060) /*!< PG[13] pin */ + +/*!< EXTI14 configuration */ +#define AFIO_EXTICR4_EXTI14_PA ((uint16_t)0x0000) /*!< PA[14] pin */ +#define AFIO_EXTICR4_EXTI14_PB ((uint16_t)0x0100) /*!< PB[14] pin */ +#define AFIO_EXTICR4_EXTI14_PC ((uint16_t)0x0200) /*!< PC[14] pin */ +#define AFIO_EXTICR4_EXTI14_PD ((uint16_t)0x0300) /*!< PD[14] pin */ +#define AFIO_EXTICR4_EXTI14_PE ((uint16_t)0x0400) /*!< PE[14] pin */ +#define AFIO_EXTICR4_EXTI14_PF ((uint16_t)0x0500) /*!< PF[14] pin */ +#define AFIO_EXTICR4_EXTI14_PG ((uint16_t)0x0600) /*!< PG[14] pin */ + +/*!< EXTI15 configuration */ +#define AFIO_EXTICR4_EXTI15_PA ((uint16_t)0x0000) /*!< PA[15] pin */ +#define AFIO_EXTICR4_EXTI15_PB ((uint16_t)0x1000) /*!< PB[15] pin */ +#define AFIO_EXTICR4_EXTI15_PC ((uint16_t)0x2000) /*!< PC[15] pin */ +#define AFIO_EXTICR4_EXTI15_PD ((uint16_t)0x3000) /*!< PD[15] pin */ +#define AFIO_EXTICR4_EXTI15_PE ((uint16_t)0x4000) /*!< PE[15] pin */ +#define AFIO_EXTICR4_EXTI15_PF ((uint16_t)0x5000) /*!< PF[15] pin */ +#define AFIO_EXTICR4_EXTI15_PG ((uint16_t)0x6000) /*!< PG[15] pin */ + +/******************************************************************************/ +/* */ +/* SystemTick */ +/* */ +/******************************************************************************/ + +/***************** Bit definition for SysTick_CTRL register *****************/ +#define SysTick_CTRL_ENABLE ((uint32_t)0x00000001) /*!< Counter enable */ +#define SysTick_CTRL_TICKINT ((uint32_t)0x00000002) /*!< Counting down to 0 pends the SysTick handler */ +#define SysTick_CTRL_CLKSOURCE ((uint32_t)0x00000004) /*!< Clock source */ +#define SysTick_CTRL_COUNTFLAG ((uint32_t)0x00010000) /*!< Count Flag */ + +/***************** Bit definition for SysTick_LOAD register *****************/ +#define SysTick_LOAD_RELOAD ((uint32_t)0x00FFFFFF) /*!< Value to load into the SysTick Current Value Register when the counter reaches 0 */ + +/***************** Bit definition for SysTick_VAL register ******************/ +#define SysTick_VAL_CURRENT ((uint32_t)0x00FFFFFF) /*!< Current value at the time the register is accessed */ + +/***************** Bit definition for SysTick_CALIB register ****************/ +#define SysTick_CALIB_TENMS ((uint32_t)0x00FFFFFF) /*!< Reload value to use for 10ms timing */ +#define SysTick_CALIB_SKEW ((uint32_t)0x40000000) /*!< Calibration value is not exactly 10 ms */ +#define SysTick_CALIB_NOREF ((uint32_t)0x80000000) /*!< The reference clock is not provided */ + +/******************************************************************************/ +/* */ +/* Nested Vectored Interrupt Controller */ +/* */ +/******************************************************************************/ + +/****************** Bit definition for NVIC_ISER register *******************/ +#define NVIC_ISER_SETENA ((uint32_t)0xFFFFFFFF) /*!< Interrupt set enable bits */ +#define NVIC_ISER_SETENA_0 ((uint32_t)0x00000001) /*!< bit 0 */ +#define NVIC_ISER_SETENA_1 ((uint32_t)0x00000002) /*!< bit 1 */ +#define NVIC_ISER_SETENA_2 ((uint32_t)0x00000004) /*!< bit 2 */ +#define NVIC_ISER_SETENA_3 ((uint32_t)0x00000008) /*!< bit 3 */ +#define NVIC_ISER_SETENA_4 ((uint32_t)0x00000010) /*!< bit 4 */ +#define NVIC_ISER_SETENA_5 ((uint32_t)0x00000020) /*!< bit 5 */ +#define NVIC_ISER_SETENA_6 ((uint32_t)0x00000040) /*!< bit 6 */ +#define NVIC_ISER_SETENA_7 ((uint32_t)0x00000080) /*!< bit 7 */ +#define NVIC_ISER_SETENA_8 ((uint32_t)0x00000100) /*!< bit 8 */ +#define NVIC_ISER_SETENA_9 ((uint32_t)0x00000200) /*!< bit 9 */ +#define NVIC_ISER_SETENA_10 ((uint32_t)0x00000400) /*!< bit 10 */ +#define NVIC_ISER_SETENA_11 ((uint32_t)0x00000800) /*!< bit 11 */ +#define NVIC_ISER_SETENA_12 ((uint32_t)0x00001000) /*!< bit 12 */ +#define NVIC_ISER_SETENA_13 ((uint32_t)0x00002000) /*!< bit 13 */ +#define NVIC_ISER_SETENA_14 ((uint32_t)0x00004000) /*!< bit 14 */ +#define NVIC_ISER_SETENA_15 ((uint32_t)0x00008000) /*!< bit 15 */ +#define NVIC_ISER_SETENA_16 ((uint32_t)0x00010000) /*!< bit 16 */ +#define NVIC_ISER_SETENA_17 ((uint32_t)0x00020000) /*!< bit 17 */ +#define NVIC_ISER_SETENA_18 ((uint32_t)0x00040000) /*!< bit 18 */ +#define NVIC_ISER_SETENA_19 ((uint32_t)0x00080000) /*!< bit 19 */ +#define NVIC_ISER_SETENA_20 ((uint32_t)0x00100000) /*!< bit 20 */ +#define NVIC_ISER_SETENA_21 ((uint32_t)0x00200000) /*!< bit 21 */ +#define NVIC_ISER_SETENA_22 ((uint32_t)0x00400000) /*!< bit 22 */ +#define NVIC_ISER_SETENA_23 ((uint32_t)0x00800000) /*!< bit 23 */ +#define NVIC_ISER_SETENA_24 ((uint32_t)0x01000000) /*!< bit 24 */ +#define NVIC_ISER_SETENA_25 ((uint32_t)0x02000000) /*!< bit 25 */ +#define NVIC_ISER_SETENA_26 ((uint32_t)0x04000000) /*!< bit 26 */ +#define NVIC_ISER_SETENA_27 ((uint32_t)0x08000000) /*!< bit 27 */ +#define NVIC_ISER_SETENA_28 ((uint32_t)0x10000000) /*!< bit 28 */ +#define NVIC_ISER_SETENA_29 ((uint32_t)0x20000000) /*!< bit 29 */ +#define NVIC_ISER_SETENA_30 ((uint32_t)0x40000000) /*!< bit 30 */ +#define NVIC_ISER_SETENA_31 ((uint32_t)0x80000000) /*!< bit 31 */ + +/****************** Bit definition for NVIC_ICER register *******************/ +#define NVIC_ICER_CLRENA ((uint32_t)0xFFFFFFFF) /*!< Interrupt clear-enable bits */ +#define NVIC_ICER_CLRENA_0 ((uint32_t)0x00000001) /*!< bit 0 */ +#define NVIC_ICER_CLRENA_1 ((uint32_t)0x00000002) /*!< bit 1 */ +#define NVIC_ICER_CLRENA_2 ((uint32_t)0x00000004) /*!< bit 2 */ +#define NVIC_ICER_CLRENA_3 ((uint32_t)0x00000008) /*!< bit 3 */ +#define NVIC_ICER_CLRENA_4 ((uint32_t)0x00000010) /*!< bit 4 */ +#define NVIC_ICER_CLRENA_5 ((uint32_t)0x00000020) /*!< bit 5 */ +#define NVIC_ICER_CLRENA_6 ((uint32_t)0x00000040) /*!< bit 6 */ +#define NVIC_ICER_CLRENA_7 ((uint32_t)0x00000080) /*!< bit 7 */ +#define NVIC_ICER_CLRENA_8 ((uint32_t)0x00000100) /*!< bit 8 */ +#define NVIC_ICER_CLRENA_9 ((uint32_t)0x00000200) /*!< bit 9 */ +#define NVIC_ICER_CLRENA_10 ((uint32_t)0x00000400) /*!< bit 10 */ +#define NVIC_ICER_CLRENA_11 ((uint32_t)0x00000800) /*!< bit 11 */ +#define NVIC_ICER_CLRENA_12 ((uint32_t)0x00001000) /*!< bit 12 */ +#define NVIC_ICER_CLRENA_13 ((uint32_t)0x00002000) /*!< bit 13 */ +#define NVIC_ICER_CLRENA_14 ((uint32_t)0x00004000) /*!< bit 14 */ +#define NVIC_ICER_CLRENA_15 ((uint32_t)0x00008000) /*!< bit 15 */ +#define NVIC_ICER_CLRENA_16 ((uint32_t)0x00010000) /*!< bit 16 */ +#define NVIC_ICER_CLRENA_17 ((uint32_t)0x00020000) /*!< bit 17 */ +#define NVIC_ICER_CLRENA_18 ((uint32_t)0x00040000) /*!< bit 18 */ +#define NVIC_ICER_CLRENA_19 ((uint32_t)0x00080000) /*!< bit 19 */ +#define NVIC_ICER_CLRENA_20 ((uint32_t)0x00100000) /*!< bit 20 */ +#define NVIC_ICER_CLRENA_21 ((uint32_t)0x00200000) /*!< bit 21 */ +#define NVIC_ICER_CLRENA_22 ((uint32_t)0x00400000) /*!< bit 22 */ +#define NVIC_ICER_CLRENA_23 ((uint32_t)0x00800000) /*!< bit 23 */ +#define NVIC_ICER_CLRENA_24 ((uint32_t)0x01000000) /*!< bit 24 */ +#define NVIC_ICER_CLRENA_25 ((uint32_t)0x02000000) /*!< bit 25 */ +#define NVIC_ICER_CLRENA_26 ((uint32_t)0x04000000) /*!< bit 26 */ +#define NVIC_ICER_CLRENA_27 ((uint32_t)0x08000000) /*!< bit 27 */ +#define NVIC_ICER_CLRENA_28 ((uint32_t)0x10000000) /*!< bit 28 */ +#define NVIC_ICER_CLRENA_29 ((uint32_t)0x20000000) /*!< bit 29 */ +#define NVIC_ICER_CLRENA_30 ((uint32_t)0x40000000) /*!< bit 30 */ +#define NVIC_ICER_CLRENA_31 ((uint32_t)0x80000000) /*!< bit 31 */ + +/****************** Bit definition for NVIC_ISPR register *******************/ +#define NVIC_ISPR_SETPEND ((uint32_t)0xFFFFFFFF) /*!< Interrupt set-pending bits */ +#define NVIC_ISPR_SETPEND_0 ((uint32_t)0x00000001) /*!< bit 0 */ +#define NVIC_ISPR_SETPEND_1 ((uint32_t)0x00000002) /*!< bit 1 */ +#define NVIC_ISPR_SETPEND_2 ((uint32_t)0x00000004) /*!< bit 2 */ +#define NVIC_ISPR_SETPEND_3 ((uint32_t)0x00000008) /*!< bit 3 */ +#define NVIC_ISPR_SETPEND_4 ((uint32_t)0x00000010) /*!< bit 4 */ +#define NVIC_ISPR_SETPEND_5 ((uint32_t)0x00000020) /*!< bit 5 */ +#define NVIC_ISPR_SETPEND_6 ((uint32_t)0x00000040) /*!< bit 6 */ +#define NVIC_ISPR_SETPEND_7 ((uint32_t)0x00000080) /*!< bit 7 */ +#define NVIC_ISPR_SETPEND_8 ((uint32_t)0x00000100) /*!< bit 8 */ +#define NVIC_ISPR_SETPEND_9 ((uint32_t)0x00000200) /*!< bit 9 */ +#define NVIC_ISPR_SETPEND_10 ((uint32_t)0x00000400) /*!< bit 10 */ +#define NVIC_ISPR_SETPEND_11 ((uint32_t)0x00000800) /*!< bit 11 */ +#define NVIC_ISPR_SETPEND_12 ((uint32_t)0x00001000) /*!< bit 12 */ +#define NVIC_ISPR_SETPEND_13 ((uint32_t)0x00002000) /*!< bit 13 */ +#define NVIC_ISPR_SETPEND_14 ((uint32_t)0x00004000) /*!< bit 14 */ +#define NVIC_ISPR_SETPEND_15 ((uint32_t)0x00008000) /*!< bit 15 */ +#define NVIC_ISPR_SETPEND_16 ((uint32_t)0x00010000) /*!< bit 16 */ +#define NVIC_ISPR_SETPEND_17 ((uint32_t)0x00020000) /*!< bit 17 */ +#define NVIC_ISPR_SETPEND_18 ((uint32_t)0x00040000) /*!< bit 18 */ +#define NVIC_ISPR_SETPEND_19 ((uint32_t)0x00080000) /*!< bit 19 */ +#define NVIC_ISPR_SETPEND_20 ((uint32_t)0x00100000) /*!< bit 20 */ +#define NVIC_ISPR_SETPEND_21 ((uint32_t)0x00200000) /*!< bit 21 */ +#define NVIC_ISPR_SETPEND_22 ((uint32_t)0x00400000) /*!< bit 22 */ +#define NVIC_ISPR_SETPEND_23 ((uint32_t)0x00800000) /*!< bit 23 */ +#define NVIC_ISPR_SETPEND_24 ((uint32_t)0x01000000) /*!< bit 24 */ +#define NVIC_ISPR_SETPEND_25 ((uint32_t)0x02000000) /*!< bit 25 */ +#define NVIC_ISPR_SETPEND_26 ((uint32_t)0x04000000) /*!< bit 26 */ +#define NVIC_ISPR_SETPEND_27 ((uint32_t)0x08000000) /*!< bit 27 */ +#define NVIC_ISPR_SETPEND_28 ((uint32_t)0x10000000) /*!< bit 28 */ +#define NVIC_ISPR_SETPEND_29 ((uint32_t)0x20000000) /*!< bit 29 */ +#define NVIC_ISPR_SETPEND_30 ((uint32_t)0x40000000) /*!< bit 30 */ +#define NVIC_ISPR_SETPEND_31 ((uint32_t)0x80000000) /*!< bit 31 */ + +/****************** Bit definition for NVIC_ICPR register *******************/ +#define NVIC_ICPR_CLRPEND ((uint32_t)0xFFFFFFFF) /*!< Interrupt clear-pending bits */ +#define NVIC_ICPR_CLRPEND_0 ((uint32_t)0x00000001) /*!< bit 0 */ +#define NVIC_ICPR_CLRPEND_1 ((uint32_t)0x00000002) /*!< bit 1 */ +#define NVIC_ICPR_CLRPEND_2 ((uint32_t)0x00000004) /*!< bit 2 */ +#define NVIC_ICPR_CLRPEND_3 ((uint32_t)0x00000008) /*!< bit 3 */ +#define NVIC_ICPR_CLRPEND_4 ((uint32_t)0x00000010) /*!< bit 4 */ +#define NVIC_ICPR_CLRPEND_5 ((uint32_t)0x00000020) /*!< bit 5 */ +#define NVIC_ICPR_CLRPEND_6 ((uint32_t)0x00000040) /*!< bit 6 */ +#define NVIC_ICPR_CLRPEND_7 ((uint32_t)0x00000080) /*!< bit 7 */ +#define NVIC_ICPR_CLRPEND_8 ((uint32_t)0x00000100) /*!< bit 8 */ +#define NVIC_ICPR_CLRPEND_9 ((uint32_t)0x00000200) /*!< bit 9 */ +#define NVIC_ICPR_CLRPEND_10 ((uint32_t)0x00000400) /*!< bit 10 */ +#define NVIC_ICPR_CLRPEND_11 ((uint32_t)0x00000800) /*!< bit 11 */ +#define NVIC_ICPR_CLRPEND_12 ((uint32_t)0x00001000) /*!< bit 12 */ +#define NVIC_ICPR_CLRPEND_13 ((uint32_t)0x00002000) /*!< bit 13 */ +#define NVIC_ICPR_CLRPEND_14 ((uint32_t)0x00004000) /*!< bit 14 */ +#define NVIC_ICPR_CLRPEND_15 ((uint32_t)0x00008000) /*!< bit 15 */ +#define NVIC_ICPR_CLRPEND_16 ((uint32_t)0x00010000) /*!< bit 16 */ +#define NVIC_ICPR_CLRPEND_17 ((uint32_t)0x00020000) /*!< bit 17 */ +#define NVIC_ICPR_CLRPEND_18 ((uint32_t)0x00040000) /*!< bit 18 */ +#define NVIC_ICPR_CLRPEND_19 ((uint32_t)0x00080000) /*!< bit 19 */ +#define NVIC_ICPR_CLRPEND_20 ((uint32_t)0x00100000) /*!< bit 20 */ +#define NVIC_ICPR_CLRPEND_21 ((uint32_t)0x00200000) /*!< bit 21 */ +#define NVIC_ICPR_CLRPEND_22 ((uint32_t)0x00400000) /*!< bit 22 */ +#define NVIC_ICPR_CLRPEND_23 ((uint32_t)0x00800000) /*!< bit 23 */ +#define NVIC_ICPR_CLRPEND_24 ((uint32_t)0x01000000) /*!< bit 24 */ +#define NVIC_ICPR_CLRPEND_25 ((uint32_t)0x02000000) /*!< bit 25 */ +#define NVIC_ICPR_CLRPEND_26 ((uint32_t)0x04000000) /*!< bit 26 */ +#define NVIC_ICPR_CLRPEND_27 ((uint32_t)0x08000000) /*!< bit 27 */ +#define NVIC_ICPR_CLRPEND_28 ((uint32_t)0x10000000) /*!< bit 28 */ +#define NVIC_ICPR_CLRPEND_29 ((uint32_t)0x20000000) /*!< bit 29 */ +#define NVIC_ICPR_CLRPEND_30 ((uint32_t)0x40000000) /*!< bit 30 */ +#define NVIC_ICPR_CLRPEND_31 ((uint32_t)0x80000000) /*!< bit 31 */ + +/****************** Bit definition for NVIC_IABR register *******************/ +#define NVIC_IABR_ACTIVE ((uint32_t)0xFFFFFFFF) /*!< Interrupt active flags */ +#define NVIC_IABR_ACTIVE_0 ((uint32_t)0x00000001) /*!< bit 0 */ +#define NVIC_IABR_ACTIVE_1 ((uint32_t)0x00000002) /*!< bit 1 */ +#define NVIC_IABR_ACTIVE_2 ((uint32_t)0x00000004) /*!< bit 2 */ +#define NVIC_IABR_ACTIVE_3 ((uint32_t)0x00000008) /*!< bit 3 */ +#define NVIC_IABR_ACTIVE_4 ((uint32_t)0x00000010) /*!< bit 4 */ +#define NVIC_IABR_ACTIVE_5 ((uint32_t)0x00000020) /*!< bit 5 */ +#define NVIC_IABR_ACTIVE_6 ((uint32_t)0x00000040) /*!< bit 6 */ +#define NVIC_IABR_ACTIVE_7 ((uint32_t)0x00000080) /*!< bit 7 */ +#define NVIC_IABR_ACTIVE_8 ((uint32_t)0x00000100) /*!< bit 8 */ +#define NVIC_IABR_ACTIVE_9 ((uint32_t)0x00000200) /*!< bit 9 */ +#define NVIC_IABR_ACTIVE_10 ((uint32_t)0x00000400) /*!< bit 10 */ +#define NVIC_IABR_ACTIVE_11 ((uint32_t)0x00000800) /*!< bit 11 */ +#define NVIC_IABR_ACTIVE_12 ((uint32_t)0x00001000) /*!< bit 12 */ +#define NVIC_IABR_ACTIVE_13 ((uint32_t)0x00002000) /*!< bit 13 */ +#define NVIC_IABR_ACTIVE_14 ((uint32_t)0x00004000) /*!< bit 14 */ +#define NVIC_IABR_ACTIVE_15 ((uint32_t)0x00008000) /*!< bit 15 */ +#define NVIC_IABR_ACTIVE_16 ((uint32_t)0x00010000) /*!< bit 16 */ +#define NVIC_IABR_ACTIVE_17 ((uint32_t)0x00020000) /*!< bit 17 */ +#define NVIC_IABR_ACTIVE_18 ((uint32_t)0x00040000) /*!< bit 18 */ +#define NVIC_IABR_ACTIVE_19 ((uint32_t)0x00080000) /*!< bit 19 */ +#define NVIC_IABR_ACTIVE_20 ((uint32_t)0x00100000) /*!< bit 20 */ +#define NVIC_IABR_ACTIVE_21 ((uint32_t)0x00200000) /*!< bit 21 */ +#define NVIC_IABR_ACTIVE_22 ((uint32_t)0x00400000) /*!< bit 22 */ +#define NVIC_IABR_ACTIVE_23 ((uint32_t)0x00800000) /*!< bit 23 */ +#define NVIC_IABR_ACTIVE_24 ((uint32_t)0x01000000) /*!< bit 24 */ +#define NVIC_IABR_ACTIVE_25 ((uint32_t)0x02000000) /*!< bit 25 */ +#define NVIC_IABR_ACTIVE_26 ((uint32_t)0x04000000) /*!< bit 26 */ +#define NVIC_IABR_ACTIVE_27 ((uint32_t)0x08000000) /*!< bit 27 */ +#define NVIC_IABR_ACTIVE_28 ((uint32_t)0x10000000) /*!< bit 28 */ +#define NVIC_IABR_ACTIVE_29 ((uint32_t)0x20000000) /*!< bit 29 */ +#define NVIC_IABR_ACTIVE_30 ((uint32_t)0x40000000) /*!< bit 30 */ +#define NVIC_IABR_ACTIVE_31 ((uint32_t)0x80000000) /*!< bit 31 */ + +/****************** Bit definition for NVIC_PRI0 register *******************/ +#define NVIC_IPR0_PRI_0 ((uint32_t)0x000000FF) /*!< Priority of interrupt 0 */ +#define NVIC_IPR0_PRI_1 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 1 */ +#define NVIC_IPR0_PRI_2 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 2 */ +#define NVIC_IPR0_PRI_3 ((uint32_t)0xFF000000) /*!< Priority of interrupt 3 */ + +/****************** Bit definition for NVIC_PRI1 register *******************/ +#define NVIC_IPR1_PRI_4 ((uint32_t)0x000000FF) /*!< Priority of interrupt 4 */ +#define NVIC_IPR1_PRI_5 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 5 */ +#define NVIC_IPR1_PRI_6 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 6 */ +#define NVIC_IPR1_PRI_7 ((uint32_t)0xFF000000) /*!< Priority of interrupt 7 */ + +/****************** Bit definition for NVIC_PRI2 register *******************/ +#define NVIC_IPR2_PRI_8 ((uint32_t)0x000000FF) /*!< Priority of interrupt 8 */ +#define NVIC_IPR2_PRI_9 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 9 */ +#define NVIC_IPR2_PRI_10 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 10 */ +#define NVIC_IPR2_PRI_11 ((uint32_t)0xFF000000) /*!< Priority of interrupt 11 */ + +/****************** Bit definition for NVIC_PRI3 register *******************/ +#define NVIC_IPR3_PRI_12 ((uint32_t)0x000000FF) /*!< Priority of interrupt 12 */ +#define NVIC_IPR3_PRI_13 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 13 */ +#define NVIC_IPR3_PRI_14 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 14 */ +#define NVIC_IPR3_PRI_15 ((uint32_t)0xFF000000) /*!< Priority of interrupt 15 */ + +/****************** Bit definition for NVIC_PRI4 register *******************/ +#define NVIC_IPR4_PRI_16 ((uint32_t)0x000000FF) /*!< Priority of interrupt 16 */ +#define NVIC_IPR4_PRI_17 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 17 */ +#define NVIC_IPR4_PRI_18 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 18 */ +#define NVIC_IPR4_PRI_19 ((uint32_t)0xFF000000) /*!< Priority of interrupt 19 */ + +/****************** Bit definition for NVIC_PRI5 register *******************/ +#define NVIC_IPR5_PRI_20 ((uint32_t)0x000000FF) /*!< Priority of interrupt 20 */ +#define NVIC_IPR5_PRI_21 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 21 */ +#define NVIC_IPR5_PRI_22 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 22 */ +#define NVIC_IPR5_PRI_23 ((uint32_t)0xFF000000) /*!< Priority of interrupt 23 */ + +/****************** Bit definition for NVIC_PRI6 register *******************/ +#define NVIC_IPR6_PRI_24 ((uint32_t)0x000000FF) /*!< Priority of interrupt 24 */ +#define NVIC_IPR6_PRI_25 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 25 */ +#define NVIC_IPR6_PRI_26 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 26 */ +#define NVIC_IPR6_PRI_27 ((uint32_t)0xFF000000) /*!< Priority of interrupt 27 */ + +/****************** Bit definition for NVIC_PRI7 register *******************/ +#define NVIC_IPR7_PRI_28 ((uint32_t)0x000000FF) /*!< Priority of interrupt 28 */ +#define NVIC_IPR7_PRI_29 ((uint32_t)0x0000FF00) /*!< Priority of interrupt 29 */ +#define NVIC_IPR7_PRI_30 ((uint32_t)0x00FF0000) /*!< Priority of interrupt 30 */ +#define NVIC_IPR7_PRI_31 ((uint32_t)0xFF000000) /*!< Priority of interrupt 31 */ + +/****************** Bit definition for SCB_CPUID register *******************/ +#define SCB_CPUID_REVISION ((uint32_t)0x0000000F) /*!< Implementation defined revision number */ +#define SCB_CPUID_PARTNO ((uint32_t)0x0000FFF0) /*!< Number of processor within family */ +#define SCB_CPUID_Constant ((uint32_t)0x000F0000) /*!< Reads as 0x0F */ +#define SCB_CPUID_VARIANT ((uint32_t)0x00F00000) /*!< Implementation defined variant number */ +#define SCB_CPUID_IMPLEMENTER ((uint32_t)0xFF000000) /*!< Implementer code. ARM is 0x41 */ + +/******************* Bit definition for SCB_ICSR register *******************/ +#define SCB_ICSR_VECTACTIVE ((uint32_t)0x000001FF) /*!< Active ISR number field */ +#define SCB_ICSR_RETTOBASE ((uint32_t)0x00000800) /*!< All active exceptions minus the IPSR_current_exception yields the empty set */ +#define SCB_ICSR_VECTPENDING ((uint32_t)0x003FF000) /*!< Pending ISR number field */ +#define SCB_ICSR_ISRPENDING ((uint32_t)0x00400000) /*!< Interrupt pending flag */ +#define SCB_ICSR_ISRPREEMPT ((uint32_t)0x00800000) /*!< It indicates that a pending interrupt becomes active in the next running cycle */ +#define SCB_ICSR_PENDSTCLR ((uint32_t)0x02000000) /*!< Clear pending SysTick bit */ +#define SCB_ICSR_PENDSTSET ((uint32_t)0x04000000) /*!< Set pending SysTick bit */ +#define SCB_ICSR_PENDSVCLR ((uint32_t)0x08000000) /*!< Clear pending pendSV bit */ +#define SCB_ICSR_PENDSVSET ((uint32_t)0x10000000) /*!< Set pending pendSV bit */ +#define SCB_ICSR_NMIPENDSET ((uint32_t)0x80000000) /*!< Set pending NMI bit */ + +/******************* Bit definition for SCB_VTOR register *******************/ +#define SCB_VTOR_TBLOFF ((uint32_t)0x1FFFFF80) /*!< Vector table base offset field */ +#define SCB_VTOR_TBLBASE ((uint32_t)0x20000000) /*!< Table base in code(0) or RAM(1) */ + +/*!<***************** Bit definition for SCB_AIRCR register *******************/ +#define SCB_AIRCR_VECTRESET ((uint32_t)0x00000001) /*!< System Reset bit */ +#define SCB_AIRCR_VECTCLRACTIVE ((uint32_t)0x00000002) /*!< Clear active vector bit */ +#define SCB_AIRCR_SYSRESETREQ ((uint32_t)0x00000004) /*!< Requests chip control logic to generate a reset */ + +#define SCB_AIRCR_PRIGROUP ((uint32_t)0x00000700) /*!< PRIGROUP[2:0] bits (Priority group) */ +#define SCB_AIRCR_PRIGROUP_0 ((uint32_t)0x00000100) /*!< Bit 0 */ +#define SCB_AIRCR_PRIGROUP_1 ((uint32_t)0x00000200) /*!< Bit 1 */ +#define SCB_AIRCR_PRIGROUP_2 ((uint32_t)0x00000400) /*!< Bit 2 */ + +/* prority group configuration */ +#define SCB_AIRCR_PRIGROUP0 ((uint32_t)0x00000000) /*!< Priority group=0 (7 bits of pre-emption priority, 1 bit of subpriority) */ +#define SCB_AIRCR_PRIGROUP1 ((uint32_t)0x00000100) /*!< Priority group=1 (6 bits of pre-emption priority, 2 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP2 ((uint32_t)0x00000200) /*!< Priority group=2 (5 bits of pre-emption priority, 3 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP3 ((uint32_t)0x00000300) /*!< Priority group=3 (4 bits of pre-emption priority, 4 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP4 ((uint32_t)0x00000400) /*!< Priority group=4 (3 bits of pre-emption priority, 5 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP5 ((uint32_t)0x00000500) /*!< Priority group=5 (2 bits of pre-emption priority, 6 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP6 ((uint32_t)0x00000600) /*!< Priority group=6 (1 bit of pre-emption priority, 7 bits of subpriority) */ +#define SCB_AIRCR_PRIGROUP7 ((uint32_t)0x00000700) /*!< Priority group=7 (no pre-emption priority, 8 bits of subpriority) */ + +#define SCB_AIRCR_ENDIANESS ((uint32_t)0x00008000) /*!< Data endianness bit */ +#define SCB_AIRCR_VECTKEY ((uint32_t)0xFFFF0000) /*!< Register key (VECTKEY) - Reads as 0xFA05 (VECTKEYSTAT) */ + +/******************* Bit definition for SCB_SCR register ********************/ +#define SCB_SCR_SLEEPONEXIT ((uint8_t)0x02) /*!< Sleep on exit bit */ +#define SCB_SCR_SLEEPDEEP ((uint8_t)0x04) /*!< Sleep deep bit */ +#define SCB_SCR_SEVONPEND ((uint8_t)0x10) /*!< Wake up from WFE */ + +/******************** Bit definition for SCB_CCR register *******************/ +#define SCB_CCR_NONBASETHRDENA ((uint16_t)0x0001) /*!< Thread mode can be entered from any level in Handler mode by controlled return value */ +#define SCB_CCR_USERSETMPEND ((uint16_t)0x0002) /*!< Enables user code to write the Software Trigger Interrupt register to trigger (pend) a Main exception */ +#define SCB_CCR_UNALIGN_TRP ((uint16_t)0x0008) /*!< Trap for unaligned access */ +#define SCB_CCR_DIV_0_TRP ((uint16_t)0x0010) /*!< Trap on Divide by 0 */ +#define SCB_CCR_BFHFNMIGN ((uint16_t)0x0100) /*!< Handlers running at priority -1 and -2 */ +#define SCB_CCR_STKALIGN ((uint16_t)0x0200) /*!< On exception entry, the SP used prior to the exception is adjusted to be 8-byte aligned */ + +/******************* Bit definition for SCB_SHPR register ********************/ +#define SCB_SHPR_PRI_N ((uint32_t)0x000000FF) /*!< Priority of system handler 4,8, and 12. Mem Manage, reserved and Debug Monitor */ +#define SCB_SHPR_PRI_N1 ((uint32_t)0x0000FF00) /*!< Priority of system handler 5,9, and 13. Bus Fault, reserved and reserved */ +#define SCB_SHPR_PRI_N2 ((uint32_t)0x00FF0000) /*!< Priority of system handler 6,10, and 14. Usage Fault, reserved and PendSV */ +#define SCB_SHPR_PRI_N3 ((uint32_t)0xFF000000) /*!< Priority of system handler 7,11, and 15. Reserved, SVCall and SysTick */ + +/****************** Bit definition for SCB_SHCSR register *******************/ +#define SCB_SHCSR_MEMFAULTACT ((uint32_t)0x00000001) /*!< MemManage is active */ +#define SCB_SHCSR_BUSFAULTACT ((uint32_t)0x00000002) /*!< BusFault is active */ +#define SCB_SHCSR_USGFAULTACT ((uint32_t)0x00000008) /*!< UsageFault is active */ +#define SCB_SHCSR_SVCALLACT ((uint32_t)0x00000080) /*!< SVCall is active */ +#define SCB_SHCSR_MONITORACT ((uint32_t)0x00000100) /*!< Monitor is active */ +#define SCB_SHCSR_PENDSVACT ((uint32_t)0x00000400) /*!< PendSV is active */ +#define SCB_SHCSR_SYSTICKACT ((uint32_t)0x00000800) /*!< SysTick is active */ +#define SCB_SHCSR_USGFAULTPENDED ((uint32_t)0x00001000) /*!< Usage Fault is pended */ +#define SCB_SHCSR_MEMFAULTPENDED ((uint32_t)0x00002000) /*!< MemManage is pended */ +#define SCB_SHCSR_BUSFAULTPENDED ((uint32_t)0x00004000) /*!< Bus Fault is pended */ +#define SCB_SHCSR_SVCALLPENDED ((uint32_t)0x00008000) /*!< SVCall is pended */ +#define SCB_SHCSR_MEMFAULTENA ((uint32_t)0x00010000) /*!< MemManage enable */ +#define SCB_SHCSR_BUSFAULTENA ((uint32_t)0x00020000) /*!< Bus Fault enable */ +#define SCB_SHCSR_USGFAULTENA ((uint32_t)0x00040000) /*!< UsageFault enable */ + +/******************* Bit definition for SCB_CFSR register *******************/ +/*!< MFSR */ +#define SCB_CFSR_IACCVIOL ((uint32_t)0x00000001) /*!< Instruction access violation */ +#define SCB_CFSR_DACCVIOL ((uint32_t)0x00000002) /*!< Data access violation */ +#define SCB_CFSR_MUNSTKERR ((uint32_t)0x00000008) /*!< Unstacking error */ +#define SCB_CFSR_MSTKERR ((uint32_t)0x00000010) /*!< Stacking error */ +#define SCB_CFSR_MMARVALID ((uint32_t)0x00000080) /*!< Memory Manage Address Register address valid flag */ +/*!< BFSR */ +#define SCB_CFSR_IBUSERR ((uint32_t)0x00000100) /*!< Instruction bus error flag */ +#define SCB_CFSR_PRECISERR ((uint32_t)0x00000200) /*!< Precise data bus error */ +#define SCB_CFSR_IMPRECISERR ((uint32_t)0x00000400) /*!< Imprecise data bus error */ +#define SCB_CFSR_UNSTKERR ((uint32_t)0x00000800) /*!< Unstacking error */ +#define SCB_CFSR_STKERR ((uint32_t)0x00001000) /*!< Stacking error */ +#define SCB_CFSR_BFARVALID ((uint32_t)0x00008000) /*!< Bus Fault Address Register address valid flag */ +/*!< UFSR */ +#define SCB_CFSR_UNDEFINSTR ((uint32_t)0x00010000) /*!< The processor attempt to excecute an undefined instruction */ +#define SCB_CFSR_INVSTATE ((uint32_t)0x00020000) /*!< Invalid combination of EPSR and instruction */ +#define SCB_CFSR_INVPC ((uint32_t)0x00040000) /*!< Attempt to load EXC_RETURN into pc illegally */ +#define SCB_CFSR_NOCP ((uint32_t)0x00080000) /*!< Attempt to use a coprocessor instruction */ +#define SCB_CFSR_UNALIGNED ((uint32_t)0x01000000) /*!< Fault occurs when there is an attempt to make an unaligned memory access */ +#define SCB_CFSR_DIVBYZERO ((uint32_t)0x02000000) /*!< Fault occurs when SDIV or DIV instruction is used with a divisor of 0 */ + +/******************* Bit definition for SCB_HFSR register *******************/ +#define SCB_HFSR_VECTTBL ((uint32_t)0x00000002) /*!< Fault occures because of vector table read on exception processing */ +#define SCB_HFSR_FORCED ((uint32_t)0x40000000) /*!< Hard Fault activated when a configurable Fault was received and cannot activate */ +#define SCB_HFSR_DEBUGEVT ((uint32_t)0x80000000) /*!< Fault related to debug */ + +/******************* Bit definition for SCB_DFSR register *******************/ +#define SCB_DFSR_HALTED ((uint8_t)0x01) /*!< Halt request flag */ +#define SCB_DFSR_BKPT ((uint8_t)0x02) /*!< BKPT flag */ +#define SCB_DFSR_DWTTRAP ((uint8_t)0x04) /*!< Data Watchpoint and Trace (DWT) flag */ +#define SCB_DFSR_VCATCH ((uint8_t)0x08) /*!< Vector catch flag */ +#define SCB_DFSR_EXTERNAL ((uint8_t)0x10) /*!< External debug request flag */ + +/******************* Bit definition for SCB_MMFAR register ******************/ +#define SCB_MMFAR_ADDRESS ((uint32_t)0xFFFFFFFF) /*!< Mem Manage fault address field */ + +/******************* Bit definition for SCB_BFAR register *******************/ +#define SCB_BFAR_ADDRESS ((uint32_t)0xFFFFFFFF) /*!< Bus fault address field */ + +/******************* Bit definition for SCB_afsr register *******************/ +#define SCB_AFSR_IMPDEF ((uint32_t)0xFFFFFFFF) /*!< Implementation defined */ + +/******************************************************************************/ +/* */ +/* External Interrupt/Event Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for EXTI_IMR register *******************/ +#define EXTI_IMR_MR0 ((uint32_t)0x00000001) /*!< Interrupt Mask on line 0 */ +#define EXTI_IMR_MR1 ((uint32_t)0x00000002) /*!< Interrupt Mask on line 1 */ +#define EXTI_IMR_MR2 ((uint32_t)0x00000004) /*!< Interrupt Mask on line 2 */ +#define EXTI_IMR_MR3 ((uint32_t)0x00000008) /*!< Interrupt Mask on line 3 */ +#define EXTI_IMR_MR4 ((uint32_t)0x00000010) /*!< Interrupt Mask on line 4 */ +#define EXTI_IMR_MR5 ((uint32_t)0x00000020) /*!< Interrupt Mask on line 5 */ +#define EXTI_IMR_MR6 ((uint32_t)0x00000040) /*!< Interrupt Mask on line 6 */ +#define EXTI_IMR_MR7 ((uint32_t)0x00000080) /*!< Interrupt Mask on line 7 */ +#define EXTI_IMR_MR8 ((uint32_t)0x00000100) /*!< Interrupt Mask on line 8 */ +#define EXTI_IMR_MR9 ((uint32_t)0x00000200) /*!< Interrupt Mask on line 9 */ +#define EXTI_IMR_MR10 ((uint32_t)0x00000400) /*!< Interrupt Mask on line 10 */ +#define EXTI_IMR_MR11 ((uint32_t)0x00000800) /*!< Interrupt Mask on line 11 */ +#define EXTI_IMR_MR12 ((uint32_t)0x00001000) /*!< Interrupt Mask on line 12 */ +#define EXTI_IMR_MR13 ((uint32_t)0x00002000) /*!< Interrupt Mask on line 13 */ +#define EXTI_IMR_MR14 ((uint32_t)0x00004000) /*!< Interrupt Mask on line 14 */ +#define EXTI_IMR_MR15 ((uint32_t)0x00008000) /*!< Interrupt Mask on line 15 */ +#define EXTI_IMR_MR16 ((uint32_t)0x00010000) /*!< Interrupt Mask on line 16 */ +#define EXTI_IMR_MR17 ((uint32_t)0x00020000) /*!< Interrupt Mask on line 17 */ +#define EXTI_IMR_MR18 ((uint32_t)0x00040000) /*!< Interrupt Mask on line 18 */ +#define EXTI_IMR_MR19 ((uint32_t)0x00080000) /*!< Interrupt Mask on line 19 */ + +/******************* Bit definition for EXTI_EMR register *******************/ +#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */ +#define EXTI_EMR_MR1 ((uint32_t)0x00000002) /*!< Event Mask on line 1 */ +#define EXTI_EMR_MR2 ((uint32_t)0x00000004) /*!< Event Mask on line 2 */ +#define EXTI_EMR_MR3 ((uint32_t)0x00000008) /*!< Event Mask on line 3 */ +#define EXTI_EMR_MR4 ((uint32_t)0x00000010) /*!< Event Mask on line 4 */ +#define EXTI_EMR_MR5 ((uint32_t)0x00000020) /*!< Event Mask on line 5 */ +#define EXTI_EMR_MR6 ((uint32_t)0x00000040) /*!< Event Mask on line 6 */ +#define EXTI_EMR_MR7 ((uint32_t)0x00000080) /*!< Event Mask on line 7 */ +#define EXTI_EMR_MR8 ((uint32_t)0x00000100) /*!< Event Mask on line 8 */ +#define EXTI_EMR_MR9 ((uint32_t)0x00000200) /*!< Event Mask on line 9 */ +#define EXTI_EMR_MR10 ((uint32_t)0x00000400) /*!< Event Mask on line 10 */ +#define EXTI_EMR_MR11 ((uint32_t)0x00000800) /*!< Event Mask on line 11 */ +#define EXTI_EMR_MR12 ((uint32_t)0x00001000) /*!< Event Mask on line 12 */ +#define EXTI_EMR_MR13 ((uint32_t)0x00002000) /*!< Event Mask on line 13 */ +#define EXTI_EMR_MR14 ((uint32_t)0x00004000) /*!< Event Mask on line 14 */ +#define EXTI_EMR_MR15 ((uint32_t)0x00008000) /*!< Event Mask on line 15 */ +#define EXTI_EMR_MR16 ((uint32_t)0x00010000) /*!< Event Mask on line 16 */ +#define EXTI_EMR_MR17 ((uint32_t)0x00020000) /*!< Event Mask on line 17 */ +#define EXTI_EMR_MR18 ((uint32_t)0x00040000) /*!< Event Mask on line 18 */ +#define EXTI_EMR_MR19 ((uint32_t)0x00080000) /*!< Event Mask on line 19 */ + +/****************** Bit definition for EXTI_RTSR register *******************/ +#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */ +#define EXTI_RTSR_TR1 ((uint32_t)0x00000002) /*!< Rising trigger event configuration bit of line 1 */ +#define EXTI_RTSR_TR2 ((uint32_t)0x00000004) /*!< Rising trigger event configuration bit of line 2 */ +#define EXTI_RTSR_TR3 ((uint32_t)0x00000008) /*!< Rising trigger event configuration bit of line 3 */ +#define EXTI_RTSR_TR4 ((uint32_t)0x00000010) /*!< Rising trigger event configuration bit of line 4 */ +#define EXTI_RTSR_TR5 ((uint32_t)0x00000020) /*!< Rising trigger event configuration bit of line 5 */ +#define EXTI_RTSR_TR6 ((uint32_t)0x00000040) /*!< Rising trigger event configuration bit of line 6 */ +#define EXTI_RTSR_TR7 ((uint32_t)0x00000080) /*!< Rising trigger event configuration bit of line 7 */ +#define EXTI_RTSR_TR8 ((uint32_t)0x00000100) /*!< Rising trigger event configuration bit of line 8 */ +#define EXTI_RTSR_TR9 ((uint32_t)0x00000200) /*!< Rising trigger event configuration bit of line 9 */ +#define EXTI_RTSR_TR10 ((uint32_t)0x00000400) /*!< Rising trigger event configuration bit of line 10 */ +#define EXTI_RTSR_TR11 ((uint32_t)0x00000800) /*!< Rising trigger event configuration bit of line 11 */ +#define EXTI_RTSR_TR12 ((uint32_t)0x00001000) /*!< Rising trigger event configuration bit of line 12 */ +#define EXTI_RTSR_TR13 ((uint32_t)0x00002000) /*!< Rising trigger event configuration bit of line 13 */ +#define EXTI_RTSR_TR14 ((uint32_t)0x00004000) /*!< Rising trigger event configuration bit of line 14 */ +#define EXTI_RTSR_TR15 ((uint32_t)0x00008000) /*!< Rising trigger event configuration bit of line 15 */ +#define EXTI_RTSR_TR16 ((uint32_t)0x00010000) /*!< Rising trigger event configuration bit of line 16 */ +#define EXTI_RTSR_TR17 ((uint32_t)0x00020000) /*!< Rising trigger event configuration bit of line 17 */ +#define EXTI_RTSR_TR18 ((uint32_t)0x00040000) /*!< Rising trigger event configuration bit of line 18 */ +#define EXTI_RTSR_TR19 ((uint32_t)0x00080000) /*!< Rising trigger event configuration bit of line 19 */ + +/****************** Bit definition for EXTI_FTSR register *******************/ +#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */ +#define EXTI_FTSR_TR1 ((uint32_t)0x00000002) /*!< Falling trigger event configuration bit of line 1 */ +#define EXTI_FTSR_TR2 ((uint32_t)0x00000004) /*!< Falling trigger event configuration bit of line 2 */ +#define EXTI_FTSR_TR3 ((uint32_t)0x00000008) /*!< Falling trigger event configuration bit of line 3 */ +#define EXTI_FTSR_TR4 ((uint32_t)0x00000010) /*!< Falling trigger event configuration bit of line 4 */ +#define EXTI_FTSR_TR5 ((uint32_t)0x00000020) /*!< Falling trigger event configuration bit of line 5 */ +#define EXTI_FTSR_TR6 ((uint32_t)0x00000040) /*!< Falling trigger event configuration bit of line 6 */ +#define EXTI_FTSR_TR7 ((uint32_t)0x00000080) /*!< Falling trigger event configuration bit of line 7 */ +#define EXTI_FTSR_TR8 ((uint32_t)0x00000100) /*!< Falling trigger event configuration bit of line 8 */ +#define EXTI_FTSR_TR9 ((uint32_t)0x00000200) /*!< Falling trigger event configuration bit of line 9 */ +#define EXTI_FTSR_TR10 ((uint32_t)0x00000400) /*!< Falling trigger event configuration bit of line 10 */ +#define EXTI_FTSR_TR11 ((uint32_t)0x00000800) /*!< Falling trigger event configuration bit of line 11 */ +#define EXTI_FTSR_TR12 ((uint32_t)0x00001000) /*!< Falling trigger event configuration bit of line 12 */ +#define EXTI_FTSR_TR13 ((uint32_t)0x00002000) /*!< Falling trigger event configuration bit of line 13 */ +#define EXTI_FTSR_TR14 ((uint32_t)0x00004000) /*!< Falling trigger event configuration bit of line 14 */ +#define EXTI_FTSR_TR15 ((uint32_t)0x00008000) /*!< Falling trigger event configuration bit of line 15 */ +#define EXTI_FTSR_TR16 ((uint32_t)0x00010000) /*!< Falling trigger event configuration bit of line 16 */ +#define EXTI_FTSR_TR17 ((uint32_t)0x00020000) /*!< Falling trigger event configuration bit of line 17 */ +#define EXTI_FTSR_TR18 ((uint32_t)0x00040000) /*!< Falling trigger event configuration bit of line 18 */ +#define EXTI_FTSR_TR19 ((uint32_t)0x00080000) /*!< Falling trigger event configuration bit of line 19 */ + +/****************** Bit definition for EXTI_SWIER register ******************/ +#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */ +#define EXTI_SWIER_SWIER1 ((uint32_t)0x00000002) /*!< Software Interrupt on line 1 */ +#define EXTI_SWIER_SWIER2 ((uint32_t)0x00000004) /*!< Software Interrupt on line 2 */ +#define EXTI_SWIER_SWIER3 ((uint32_t)0x00000008) /*!< Software Interrupt on line 3 */ +#define EXTI_SWIER_SWIER4 ((uint32_t)0x00000010) /*!< Software Interrupt on line 4 */ +#define EXTI_SWIER_SWIER5 ((uint32_t)0x00000020) /*!< Software Interrupt on line 5 */ +#define EXTI_SWIER_SWIER6 ((uint32_t)0x00000040) /*!< Software Interrupt on line 6 */ +#define EXTI_SWIER_SWIER7 ((uint32_t)0x00000080) /*!< Software Interrupt on line 7 */ +#define EXTI_SWIER_SWIER8 ((uint32_t)0x00000100) /*!< Software Interrupt on line 8 */ +#define EXTI_SWIER_SWIER9 ((uint32_t)0x00000200) /*!< Software Interrupt on line 9 */ +#define EXTI_SWIER_SWIER10 ((uint32_t)0x00000400) /*!< Software Interrupt on line 10 */ +#define EXTI_SWIER_SWIER11 ((uint32_t)0x00000800) /*!< Software Interrupt on line 11 */ +#define EXTI_SWIER_SWIER12 ((uint32_t)0x00001000) /*!< Software Interrupt on line 12 */ +#define EXTI_SWIER_SWIER13 ((uint32_t)0x00002000) /*!< Software Interrupt on line 13 */ +#define EXTI_SWIER_SWIER14 ((uint32_t)0x00004000) /*!< Software Interrupt on line 14 */ +#define EXTI_SWIER_SWIER15 ((uint32_t)0x00008000) /*!< Software Interrupt on line 15 */ +#define EXTI_SWIER_SWIER16 ((uint32_t)0x00010000) /*!< Software Interrupt on line 16 */ +#define EXTI_SWIER_SWIER17 ((uint32_t)0x00020000) /*!< Software Interrupt on line 17 */ +#define EXTI_SWIER_SWIER18 ((uint32_t)0x00040000) /*!< Software Interrupt on line 18 */ +#define EXTI_SWIER_SWIER19 ((uint32_t)0x00080000) /*!< Software Interrupt on line 19 */ + +/******************* Bit definition for EXTI_PR register ********************/ +#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit for line 0 */ +#define EXTI_PR_PR1 ((uint32_t)0x00000002) /*!< Pending bit for line 1 */ +#define EXTI_PR_PR2 ((uint32_t)0x00000004) /*!< Pending bit for line 2 */ +#define EXTI_PR_PR3 ((uint32_t)0x00000008) /*!< Pending bit for line 3 */ +#define EXTI_PR_PR4 ((uint32_t)0x00000010) /*!< Pending bit for line 4 */ +#define EXTI_PR_PR5 ((uint32_t)0x00000020) /*!< Pending bit for line 5 */ +#define EXTI_PR_PR6 ((uint32_t)0x00000040) /*!< Pending bit for line 6 */ +#define EXTI_PR_PR7 ((uint32_t)0x00000080) /*!< Pending bit for line 7 */ +#define EXTI_PR_PR8 ((uint32_t)0x00000100) /*!< Pending bit for line 8 */ +#define EXTI_PR_PR9 ((uint32_t)0x00000200) /*!< Pending bit for line 9 */ +#define EXTI_PR_PR10 ((uint32_t)0x00000400) /*!< Pending bit for line 10 */ +#define EXTI_PR_PR11 ((uint32_t)0x00000800) /*!< Pending bit for line 11 */ +#define EXTI_PR_PR12 ((uint32_t)0x00001000) /*!< Pending bit for line 12 */ +#define EXTI_PR_PR13 ((uint32_t)0x00002000) /*!< Pending bit for line 13 */ +#define EXTI_PR_PR14 ((uint32_t)0x00004000) /*!< Pending bit for line 14 */ +#define EXTI_PR_PR15 ((uint32_t)0x00008000) /*!< Pending bit for line 15 */ +#define EXTI_PR_PR16 ((uint32_t)0x00010000) /*!< Pending bit for line 16 */ +#define EXTI_PR_PR17 ((uint32_t)0x00020000) /*!< Pending bit for line 17 */ +#define EXTI_PR_PR18 ((uint32_t)0x00040000) /*!< Pending bit for line 18 */ +#define EXTI_PR_PR19 ((uint32_t)0x00080000) /*!< Pending bit for line 19 */ + +/******************************************************************************/ +/* */ +/* DMA Controller */ +/* */ +/******************************************************************************/ + +/******************* Bit definition for DMA_ISR register ********************/ +#define DMA_ISR_GIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt flag */ +#define DMA_ISR_TCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete flag */ +#define DMA_ISR_HTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer flag */ +#define DMA_ISR_TEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error flag */ +#define DMA_ISR_GIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt flag */ +#define DMA_ISR_TCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete flag */ +#define DMA_ISR_HTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer flag */ +#define DMA_ISR_TEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error flag */ +#define DMA_ISR_GIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt flag */ +#define DMA_ISR_TCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete flag */ +#define DMA_ISR_HTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer flag */ +#define DMA_ISR_TEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error flag */ +#define DMA_ISR_GIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt flag */ +#define DMA_ISR_TCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete flag */ +#define DMA_ISR_HTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer flag */ +#define DMA_ISR_TEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error flag */ +#define DMA_ISR_GIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt flag */ +#define DMA_ISR_TCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete flag */ +#define DMA_ISR_HTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer flag */ +#define DMA_ISR_TEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error flag */ +#define DMA_ISR_GIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt flag */ +#define DMA_ISR_TCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete flag */ +#define DMA_ISR_HTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer flag */ +#define DMA_ISR_TEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error flag */ +#define DMA_ISR_GIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt flag */ +#define DMA_ISR_TCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete flag */ +#define DMA_ISR_HTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer flag */ +#define DMA_ISR_TEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error flag */ + +/******************* Bit definition for DMA_IFCR register *******************/ +#define DMA_IFCR_CGIF1 ((uint32_t)0x00000001) /*!< Channel 1 Global interrupt clearr */ +#define DMA_IFCR_CTCIF1 ((uint32_t)0x00000002) /*!< Channel 1 Transfer Complete clear */ +#define DMA_IFCR_CHTIF1 ((uint32_t)0x00000004) /*!< Channel 1 Half Transfer clear */ +#define DMA_IFCR_CTEIF1 ((uint32_t)0x00000008) /*!< Channel 1 Transfer Error clear */ +#define DMA_IFCR_CGIF2 ((uint32_t)0x00000010) /*!< Channel 2 Global interrupt clear */ +#define DMA_IFCR_CTCIF2 ((uint32_t)0x00000020) /*!< Channel 2 Transfer Complete clear */ +#define DMA_IFCR_CHTIF2 ((uint32_t)0x00000040) /*!< Channel 2 Half Transfer clear */ +#define DMA_IFCR_CTEIF2 ((uint32_t)0x00000080) /*!< Channel 2 Transfer Error clear */ +#define DMA_IFCR_CGIF3 ((uint32_t)0x00000100) /*!< Channel 3 Global interrupt clear */ +#define DMA_IFCR_CTCIF3 ((uint32_t)0x00000200) /*!< Channel 3 Transfer Complete clear */ +#define DMA_IFCR_CHTIF3 ((uint32_t)0x00000400) /*!< Channel 3 Half Transfer clear */ +#define DMA_IFCR_CTEIF3 ((uint32_t)0x00000800) /*!< Channel 3 Transfer Error clear */ +#define DMA_IFCR_CGIF4 ((uint32_t)0x00001000) /*!< Channel 4 Global interrupt clear */ +#define DMA_IFCR_CTCIF4 ((uint32_t)0x00002000) /*!< Channel 4 Transfer Complete clear */ +#define DMA_IFCR_CHTIF4 ((uint32_t)0x00004000) /*!< Channel 4 Half Transfer clear */ +#define DMA_IFCR_CTEIF4 ((uint32_t)0x00008000) /*!< Channel 4 Transfer Error clear */ +#define DMA_IFCR_CGIF5 ((uint32_t)0x00010000) /*!< Channel 5 Global interrupt clear */ +#define DMA_IFCR_CTCIF5 ((uint32_t)0x00020000) /*!< Channel 5 Transfer Complete clear */ +#define DMA_IFCR_CHTIF5 ((uint32_t)0x00040000) /*!< Channel 5 Half Transfer clear */ +#define DMA_IFCR_CTEIF5 ((uint32_t)0x00080000) /*!< Channel 5 Transfer Error clear */ +#define DMA_IFCR_CGIF6 ((uint32_t)0x00100000) /*!< Channel 6 Global interrupt clear */ +#define DMA_IFCR_CTCIF6 ((uint32_t)0x00200000) /*!< Channel 6 Transfer Complete clear */ +#define DMA_IFCR_CHTIF6 ((uint32_t)0x00400000) /*!< Channel 6 Half Transfer clear */ +#define DMA_IFCR_CTEIF6 ((uint32_t)0x00800000) /*!< Channel 6 Transfer Error clear */ +#define DMA_IFCR_CGIF7 ((uint32_t)0x01000000) /*!< Channel 7 Global interrupt clear */ +#define DMA_IFCR_CTCIF7 ((uint32_t)0x02000000) /*!< Channel 7 Transfer Complete clear */ +#define DMA_IFCR_CHTIF7 ((uint32_t)0x04000000) /*!< Channel 7 Half Transfer clear */ +#define DMA_IFCR_CTEIF7 ((uint32_t)0x08000000) /*!< Channel 7 Transfer Error clear */ + +/******************* Bit definition for DMA_CCR1 register *******************/ +#define DMA_CCR1_EN ((uint16_t)0x0001) /*!< Channel enable*/ +#define DMA_CCR1_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR1_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR1_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR1_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR1_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR1_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR1_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR1_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR1_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR1_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR1_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR1_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR1_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR1_PL ((uint16_t)0x3000) /*!< PL[1:0] bits(Channel Priority level) */ +#define DMA_CCR1_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR1_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR1_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ + +/******************* Bit definition for DMA_CCR2 register *******************/ +#define DMA_CCR2_EN ((uint16_t)0x0001) /*!< Channel enable */ +#define DMA_CCR2_TCIE ((uint16_t)0x0002) /*!< ransfer complete interrupt enable */ +#define DMA_CCR2_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR2_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR2_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR2_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR2_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR2_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR2_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR2_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR2_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR2_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR2_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR2_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR2_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ +#define DMA_CCR2_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR2_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR2_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ + +/******************* Bit definition for DMA_CCR3 register *******************/ +#define DMA_CCR3_EN ((uint16_t)0x0001) /*!< Channel enable */ +#define DMA_CCR3_TCIE ((uint16_t)0x0002) /*!< Transfer complete interrupt enable */ +#define DMA_CCR3_HTIE ((uint16_t)0x0004) /*!< Half Transfer interrupt enable */ +#define DMA_CCR3_TEIE ((uint16_t)0x0008) /*!< Transfer error interrupt enable */ +#define DMA_CCR3_DIR ((uint16_t)0x0010) /*!< Data transfer direction */ +#define DMA_CCR3_CIRC ((uint16_t)0x0020) /*!< Circular mode */ +#define DMA_CCR3_PINC ((uint16_t)0x0040) /*!< Peripheral increment mode */ +#define DMA_CCR3_MINC ((uint16_t)0x0080) /*!< Memory increment mode */ + +#define DMA_CCR3_PSIZE ((uint16_t)0x0300) /*!< PSIZE[1:0] bits (Peripheral size) */ +#define DMA_CCR3_PSIZE_0 ((uint16_t)0x0100) /*!< Bit 0 */ +#define DMA_CCR3_PSIZE_1 ((uint16_t)0x0200) /*!< Bit 1 */ + +#define DMA_CCR3_MSIZE ((uint16_t)0x0C00) /*!< MSIZE[1:0] bits (Memory size) */ +#define DMA_CCR3_MSIZE_0 ((uint16_t)0x0400) /*!< Bit 0 */ +#define DMA_CCR3_MSIZE_1 ((uint16_t)0x0800) /*!< Bit 1 */ + +#define DMA_CCR3_PL ((uint16_t)0x3000) /*!< PL[1:0] bits (Channel Priority level) */ +#define DMA_CCR3_PL_0 ((uint16_t)0x1000) /*!< Bit 0 */ +#define DMA_CCR3_PL_1 ((uint16_t)0x2000) /*!< Bit 1 */ + +#define DMA_CCR3_MEM2MEM ((uint16_t)0x4000) /*!< Memory to memory mode */ + +/*!<****************** Bit definition for DMA_CCR4 register *******************/ +#define DMA_CCR4_EN ((uint16_t)0x0001) /*!