From ee082057c9d6407b480ad1f5fb81a872594d40e0 Mon Sep 17 00:00:00 2001 From: Giovanni Di Sirio Date: Thu, 19 Aug 2021 09:27:48 +0000 Subject: [PATCH] EFL driver and demo for STM32F3xx. git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@14671 27425a3e-05d8-49a3-a47f-9c15f0e5edd8 --- testhal/STM32/multi/EFL-MFS/Makefile | 6 + .../EFL-MFS/cfg/stm32f302_nucleo64/halconf.h | 531 ++++++++++++++++++ .../EFL-MFS/cfg/stm32f302_nucleo64/mcuconf.h | 253 +++++++++ .../EFL-MFS/cfg/stm32f302_nucleo64/portab.h | 76 +++ .../EFL-MFS/make/stm32f302_nucleo64.make | 226 ++++++++ 5 files changed, 1092 insertions(+) create mode 100644 testhal/STM32/multi/EFL-MFS/cfg/stm32f302_nucleo64/halconf.h create mode 100644 testhal/STM32/multi/EFL-MFS/cfg/stm32f302_nucleo64/mcuconf.h create mode 100644 testhal/STM32/multi/EFL-MFS/cfg/stm32f302_nucleo64/portab.h create mode 100644 testhal/STM32/multi/EFL-MFS/make/stm32f302_nucleo64.make diff --git a/testhal/STM32/multi/EFL-MFS/Makefile b/testhal/STM32/multi/EFL-MFS/Makefile index 8fed918b3..0cf12d9da 100644 --- a/testhal/STM32/multi/EFL-MFS/Makefile +++ b/testhal/STM32/multi/EFL-MFS/Makefile @@ -8,11 +8,17 @@ all: +@make --no-print-directory -f ./make/stm32l476_discovery.make all @echo ==================================================================== @echo + @echo === Building for STM32F302-Nucleo64 ================================ + +@make --no-print-directory -f ./make/stm32f302_nucleo64.make all + @echo ==================================================================== + @echo clean: @echo +@make --no-print-directory -f ./make/stm32l476_discovery.make clean @echo + +@make --no-print-directory -f ./make/stm32f302_nucleo64.make clean + @echo # ############################################################################## diff --git a/testhal/STM32/multi/EFL-MFS/cfg/stm32f302_nucleo64/halconf.h b/testhal/STM32/multi/EFL-MFS/cfg/stm32f302_nucleo64/halconf.h new file mode 100644 index 000000000..4b190182a --- /dev/null +++ b/testhal/STM32/multi/EFL-MFS/cfg/stm32f302_nucleo64/halconf.h @@ -0,0 +1,531 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#define _CHIBIOS_HAL_CONF_ +#define _CHIBIOS_HAL_CONF_VER_7_1_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EFlash subsystem. + */ +#if !defined(HAL_USE_EFL) || defined(__DOXYGEN__) +#define HAL_USE_EFL TRUE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL TRUE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SIO subsystem. + */ +#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) +#define HAL_USE_SIO FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the TRNG subsystem. + */ +#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) +#define HAL_USE_TRNG FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/** + * @brief Enables the WSPI subsystem. + */ +#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) +#define HAL_USE_WSPI FALSE +#endif + +/*===========================================================================*/ +/* PAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) +#define PAL_USE_CALLBACKS FALSE +#endif + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) +#define PAL_USE_WAIT FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/** + * @brief Enforces the driver to use direct callbacks rather than OSAL events. + */ +#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) +#define CAN_ENFORCE_USE_CALLBACKS FALSE +#endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ +/* DAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) +#define DAC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define DAC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the zero-copy API. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/** + * @brief OCR initialization constant for V20 cards. + */ +#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) +#define SDC_INIT_OCR_V20 0x50FF8000U +#endif + +/** + * @brief OCR initialization constant for non-V20 cards. + */ +#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) +#define SDC_INIT_OCR 0x80100000U +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables circular transfers APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) +#define SPI_USE_CIRCULAR FALSE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/** + * @brief Handling method for SPI CS line. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) +#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +/*===========================================================================*/ +/* WSPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) +#define WSPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define WSPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/testhal/STM32/multi/EFL-MFS/cfg/stm32f302_nucleo64/mcuconf.h b/testhal/STM32/multi/EFL-MFS/cfg/stm32f302_nucleo64/mcuconf.h new file mode 100644 index 000000000..a6a190cdb --- /dev/null +++ b/testhal/STM32/multi/EFL-MFS/cfg/stm32f302_nucleo64/mcuconf.h @@ -0,0 +1,253 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * STM32F3xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F3xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 +#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_USART2SW STM32_USART2SW_PCLK +#define STM32_USART3SW STM32_USART3SW_PCLK +#define STM32_UART4SW STM32_UART4SW_PCLK +#define STM32_UART5SW STM32_UART5SW_PCLK +#define STM32_I2C1SW STM32_I2C1SW_SYSCLK +#define STM32_I2C2SW STM32_I2C2SW_SYSCLK +#define STM32_TIM1SW STM32_TIM1SW_PCLK2 +#define STM32_TIM8SW STM32_TIM8SW_PCLK2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY 6 +#define STM32_IRQ_EXTI1_PRIORITY 6 +#define STM32_IRQ_EXTI2_PRIORITY 6 +#define STM32_IRQ_EXTI3_PRIORITY 6 +#define STM32_IRQ_EXTI4_PRIORITY 6 +#define STM32_IRQ_EXTI5_9_PRIORITY 6 +#define STM32_IRQ_EXTI10_15_PRIORITY 6 +#define STM32_IRQ_EXTI16_PRIORITY 6 +#define STM32_IRQ_EXTI17_PRIORITY 6 +#define STM32_IRQ_EXTI18_PRIORITY 6 +#define STM32_IRQ_EXTI19_PRIORITY 6 +#define STM32_IRQ_EXTI20_PRIORITY 6 +#define STM32_IRQ_EXTI21_22_29_PRIORITY 6 +#define STM32_IRQ_EXTI30_32_PRIORITY 6 +#define STM32_IRQ_EXTI33_PRIORITY 6 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_DUAL_MODE FALSE +#define STM32_ADC_COMPACT_SAMPLES FALSE +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC2 FALSE +#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_USE_ADC4 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC2_DMA_PRIORITY 2 +#define STM32_ADC_ADC3_DMA_PRIORITY 2 +#define STM32_ADC_ADC4_DMA_PRIORITY 2 +#define STM32_ADC_ADC12_IRQ_PRIORITY 5 +#define STM32_ADC_ADC3_IRQ_PRIORITY 5 +#define STM32_ADC_ADC4_IRQ_PRIORITY 5 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * DAC driver system settings. + */ +#define STM32_DAC_DUAL_MODE FALSE +#define STM32_DAC_USE_DAC1_CH1 FALSE +#define STM32_DAC_USE_DAC1_CH2 FALSE +#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 +#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 10 +#define STM32_I2C_I2C2_IRQ_PRIORITY 10 +#define STM32_I2C_USE_DMA TRUE +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 TRUE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 FALSE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +#endif /* MCUCONF_H */ diff --git a/testhal/STM32/multi/EFL-MFS/cfg/stm32f302_nucleo64/portab.h b/testhal/STM32/multi/EFL-MFS/cfg/stm32f302_nucleo64/portab.h new file mode 100644 index 000000000..91d49fb9f --- /dev/null +++ b/testhal/STM32/multi/EFL-MFS/cfg/stm32f302_nucleo64/portab.h @@ -0,0 +1,76 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file portab.h + * @brief Application portability macros and structures. + * + * @addtogroup application_portability + * @{ + */ + +#ifndef PORTAB_H +#define PORTAB_H + +/*===========================================================================*/ +/* Module constants. */ +/*===========================================================================*/ + +#define PORTAB_LINE_LED1 LINE_LED_GREEN +#define PORTAB_LINE_LED2 LINE_LED_GREEN +#define PORTAB_LED_OFF PAL_LOW +#define PORTAB_LED_ON PAL_HIGH + +#define PORTAB_LINE_BUTTON LINE_BUTTON +#define PORTAB_BUTTON_PRESSED PAL_LOW + +#define PORTAB_SD1 SD2 + +/*===========================================================================*/ +/* Module pre-compile time settings. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Derived constants and error checks. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Module data structures and types. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Module macros. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* External declarations. */ +/*===========================================================================*/ + +#ifdef __cplusplus +extern "C" { +#endif + void portab_setup(void); +#ifdef __cplusplus +} +#endif + +/*===========================================================================*/ +/* Module inline functions. */ +/*===========================================================================*/ + +#endif /* PORTAB_H */ + +/** @} */ diff --git a/testhal/STM32/multi/EFL-MFS/make/stm32f302_nucleo64.make b/testhal/STM32/multi/EFL-MFS/make/stm32f302_nucleo64.make new file mode 100644 index 000000000..912fa823d --- /dev/null +++ b/testhal/STM32/multi/EFL-MFS/make/stm32f302_nucleo64.make @@ -0,0 +1,226 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O0 -gdwarf-3 -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# FPU-related options. +ifeq ($(USE_FPU_OPT),) + USE_FPU_OPT = -mfloat-abi=$(USE_FPU) -mfpu=fpv4-sp-d16 +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS := ../../../.. +CONFDIR := ./cfg/stm32f302_nucleo64 +BUILDDIR := ./build/stm32f302_nucleo64 +DEPDIR := ./.dep/stm32f302_nucleo64 + +# Licensing files. +include $(CHIBIOS)/os/license/license.mk +# Startup files. +include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f3xx.mk +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F3xx/platform.mk +include $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_F302R8/board.mk +include $(CHIBIOS)/os/hal/osal/rt-nil/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk +# Auto-build files in ./source recursively. +include $(CHIBIOS)/tools/mk/autobuild.mk +# Other files (optional). +include $(CHIBIOS)/test/lib/test.mk +include $(CHIBIOS)/test/mfs/mfs_test.mk +include $(CHIBIOS)/os/hal/lib/complex/mfs/hal_mfs.mk +include $(CHIBIOS)/os/hal/lib/streams/streams.mk + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/STM32F302x8.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(ALLCSRC) \ + $(TESTSRC) \ + $(CONFDIR)/portab.c \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = $(ALLCPPSRC) + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(ALLASMSRC) +ASMXSRC = $(ALLXASMSRC) + +INCDIR = $(ALLINC) $(TESTINC) $(CONFDIR) + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = -DMFS_CFG_MEMORY_ALIGNMENT=8 + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user section +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk +include $(RULESPATH)/rules.mk