andreika-git
/
ChibiOS
mirror of https://github.com/andreika-git/ChibiOS.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@3315 35acf78f-673a-0410-8e92-d51de3d6d3f4

This commit is contained in:
gdisirio 2011-09-14 16:53:08 +00:00
parent fbac4d253d
commit ff435ba9f4
11 changed files with 1784 additions and 19 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

36
os/hal/platforms/STM32/mac_lld.c
View File

@ -49,9 +49,6 @@
#error "STM32_HCLK below minimum frequency for ETH operations (20MHz)"
#endif
/* PHY address.*/
#define MACMIIDR_PA (32 << 11)
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
@ -83,14 +80,14 @@ static uint32_t tb[MAC_TRANSMIT_BUFFERS * BUFFER_SLICE];
*
* @param[in] reg register number
* @param[in] value new register value
*
* @notapi
*/
static void mii_write_phy(uint16_t reg, uint16_t value) {
uint32_t miiar;
void _stm32_eth_write_phy(uint32_t reg, uint32_t value) {
miiar = ETH->MACMIIAR | ETH_MACMIIAR_MW | ETH_MACMIIAR_MB;
miiar = (miiar & ~ETH_MACMIIAR_MR) | (reg << 6);
ETH->MACMIIDR = value;
ETH->MACMIIAR = miiar;
ETH->MACMIIAR = BOARD_PHY_ADDR | (reg << 6) | MACMIIDR_CR |
ETH_MACMIIAR_MW | ETH_MACMIIAR_MB;
while ((ETH->MACMIIAR & ETH_MACMIIAR_MB) != 0)
;
}
@ -99,21 +96,23 @@ static void mii_write_phy(uint16_t reg, uint16_t value) {
* @brief Reads a PHY register.
*
* @param[in] reg register number
*
* @notapi
*/
static uint16_t mii_read_phy(uint16_t reg) {
uint32_t miiar;
static uint32_t _stm32_eth_read_phy(uint32_t reg) {
miiar = ETH->MACMIIAR | ETH_MACMIIAR_MB;
miiar = (miiar & ~(ETH_MACMIIAR_MR | ETH_MACMIIAR_MW)) | (reg << 6);
ETH->MACMIIAR = miiar;
ETH->MACMIIAR = BOARD_PHY_ADDR | (reg << 6) | MACMIIDR_CR |
ETH_MACMIIAR_MB;
while ((ETH->MACMIIAR & ETH_MACMIIAR_MB) != 0)
;
return (uint16_t)ETH->MACMIIDR;
return ETH->MACMIIDR;
}
/**
* @brief MII/RMII interface initialization.
*/
#if 0
static void mii_init(void) {
uint32_t i;
@ -126,6 +125,7 @@ static void mii_init(void) {
/* Wrong or defective board.*/
chSysHalt();
}
#endif
/*===========================================================================*/
/* Driver interrupt handlers. */
@ -148,7 +148,7 @@ void mac_lld_init(void) {
/* Descriptor tables are initialized in linked mode, note that the first
word is not initialized here but in mac_lld_start().*/
for (i = 0; i < MAC_RECEIVE_BUFFERS; i++) {
rd[i].rdes1 = RDES1_RCH | MAC_BUFFERS_SIZE;
rd[i].rdes1 = STM32_RDES1_RCH | MAC_BUFFERS_SIZE;
rd[i].rdes2 = (uint32_t)&rb[i * BUFFER_SLICE];
rd[i].rdes3 = (uint32_t)&rb[((i + 1) % MAC_RECEIVE_BUFFERS) *
BUFFER_SLICE];
@ -173,10 +173,10 @@ void mac_lld_start(MACDriver *macp) {
/* Resets the state of all descriptors.*/
for (i = 0; i < MAC_RECEIVE_BUFFERS; i++)
rd[i].rdes0 = RDES0_OWN;
rd[i].rdes0 = STM32_RDES0_OWN;
rxptr = (stm32_eth_rx_descriptor_t *)rd;
for (i = 0; i < MAC_TRANSMIT_BUFFERS; i++)
td[i].tdes0 = TDES0_TCH;
td[i].tdes0 = STM32_TDES0_TCH;
txptr = (stm32_eth_tx_descriptor_t *)td;
/* Soft reset of the MAC core and wait until the reset is complete.*/
@ -185,7 +185,7 @@ void mac_lld_start(MACDriver *macp) {
;
/* MII initialization.*/
mii_init();
// mii_init();
/* Descriptor chains pointers.*/
ETH->DMARDLAR = (uint32_t)rd;

77
os/hal/platforms/STM32/mac_lld.h
View File

@ -1,6 +1,6 @@
/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
2011 Giovanni Di Sirio.
2011 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
@ -35,6 +35,81 @@
/* Driver constants. */
/*===========================================================================*/
/**
* @name RDES0 constants
* @{
*/
#define STM32_RDES0_OWN 0x80000000
#define STM32_RDES0_AFM 0x40000000
#define STM32_RDES0_FL_MASK 0x3FFF0000
#define STM32_RDES0_ES 0x00008000
#define STM32_RDES0_DESERR 0x00004000
#define STM32_RDES0_SAF 0x00002000
#define STM32_RDES0_LE 0x00001000
#define STM32_RDES0_OE 0x00000800
#define STM32_RDES0_VLAN 0x00000400
#define STM32_RDES0_FS 0x00000200
#define STM32_RDES0_LS 0x00000100
#define STM32_RDES0_IPHCE 0x00000080
#define STM32_RDES0_LCO 0x00000040
#define STM32_RDES0_FT 0x00000020
#define STM32_RDES0_RWT 0x00000010
#define STM32_RDES0_RE 0x00000008
#define STM32_RDES0_DE 0x00000004
#define STM32_RDES0_CE 0x00000002
#define STM32_RDES0_PCE 0x00000001
/** @} */
/**
* @name RDES1 constants
* @{
*/
#define STM32_RDES1_DIC 0x80000000
#define STM32_RDES1_RBS2_MASK 0x1FFF0000
#define STM32_RDES1_RER 0x00008000
#define STM32_RDES1_RCH 0x00004000
#define STM32_RDES1_RBS1_MASK 0x00001FFF
/** @} */
/**
* @name TDES0 constants
* @{
*/
#define STM32_TDES0_OWN 0x80000000
#define STM32_TDES0_IC 0x40000000
#define STM32_TDES0_LS 0x20000000
#define STM32_TDES0_FS 0x10000000
#define STM32_TDES0_DC 0x08000000
#define STM32_TDES0_DP 0x04000000
#define STM32_TDES0_TTSE 0x02000000
#define STM32_TDES0_CIC_MASK 0x00C00000
#define STM32_TDES0_TER 0x00200000
#define STM32_TDES0_TCH 0x00100000
#define STM32_TDES0_TTSS 0x00020000
#define STM32_TDES0_IHE 0x00010000
#define STM32_TDES0_ES 0x00008000
#define STM32_TDES0_JT 0x00004000
#define STM32_TDES0_FF 0x00002000
#define STM32_TDES0_IPE 0x00001000
#define STM32_TDES0_LCA 0x00000800
#define STM32_TDES0_NC 0x00000400
#define STM32_TDES0_LCO 0x00000200
#define STM32_TDES0_EC 0x00000100
#define STM32_TDES0_VF 0x00000080
#define STM32_TDES0_CC_MASK 0x00000078
#define STM32_TDES0_ED 0x00000004
#define STM32_TDES0_UF 0x00000002
#define STM32_TDES0_DB 0x00000001
/** @} */
/**
* @name TDES1 constants
* @{
*/
#define STM32_TDES1_TBS2_MASK 0x1FFF0000
#define STM32_TDES1_TBS1_MASK 0x00001FFF
/** @} */
/*===========================================================================*/
/* Driver pre-compile time settings. */
/*===========================================================================*/

1
os/hal/platforms/STM32F1xx/platform.mk
View File

@ -6,6 +6,7 @@ PLATFORMSRC = ${CHIBIOS}/os/hal/platforms/STM32F1xx/hal_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/gpt_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/icu_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/i2c_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/mac_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/pwm_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/serial_lld.c \
${CHIBIOS}/os/hal/platforms/STM32/GPIOv1/pal_lld.c \

211
testhal/STM32F1xx/MAC/.cproject Normal file
View File

@ -0,0 +1,211 @@
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<?fileVersion 4.0.0?>
<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
<storageModule moduleId="org.eclipse.cdt.core.settings">
<cconfiguration id="0.1121060394">
<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.1121060394" moduleId="org.eclipse.cdt.core.settings" name="Default">
<externalSettings/>
<extensions>
<extension id="org.eclipse.cdt.core.GNU_ELF" point="org.eclipse.cdt.core.BinaryParser"/>
<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
</extensions>
</storageModule>
<storageModule moduleId="cdtBuildSystem" version="4.0.0">
<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.1121060394" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
<folderInfo id="0.1121060394." name="/" resourcePath="">
<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1049538698" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
<targetPlatform binaryParser="org.eclipse.cdt.core.GNU_ELF" id="org.eclipse.cdt.build.core.prefbase.toolchain.1049538698.1896480683" name=""/>
<builder command="mingw32-make" id="org.eclipse.cdt.build.core.settings.default.builder.1566633813" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
<tool id="org.eclipse.cdt.build.core.settings.holder.libs.153729928" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
<tool id="org.eclipse.cdt.build.core.settings.holder.1543371144" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1387552345" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
</tool>
<tool id="org.eclipse.cdt.build.core.settings.holder.1388006141" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.425207452" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
</tool>
<tool id="org.eclipse.cdt.build.core.settings.holder.1018681618" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1975555915" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
</tool>
</toolChain>
</folderInfo>
</configuration>
</storageModule>
<storageModule moduleId="scannerConfiguration">
<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="makefileGenerator">
<runAction arguments="-E -P -v -dD" command="" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-c 'gcc -E -P -v -dD &quot;${plugin_state_location}/${specs_file}&quot;'" command="sh" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-c 'g++ -E -P -v -dD &quot;${plugin_state_location}/specs.cpp&quot;'" command="sh" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-c 'gcc -E -P -v -dD &quot;${plugin_state_location}/specs.c&quot;'" command="sh" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<scannerConfigBuildInfo instanceId="0.1121060394">
<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="makefileGenerator">
<runAction arguments="-f ${project_name}_scd.mk" command="make" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC">
<buildOutputProvider>
<openAction enabled="true" filePath=""/>
<parser enabled="true"/>
</buildOutputProvider>
<scannerInfoProvider id="specsFile">
<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/>
<parser enabled="true"/>
</scannerInfoProvider>
</profile>
</scannerConfigBuildInfo>
</storageModule>
<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
</cconfiguration>
</storageModule>
<storageModule moduleId="cdtBuildSystem" version="4.0.0">
<project id="TEST-STM32-MAC.null.1991119762" name="TEST-STM32-MAC"/>
</storageModule>
</cproject>

85
testhal/STM32F1xx/MAC/.project Normal file
View File

@ -0,0 +1,85 @@
<?xml version="1.0" encoding="UTF-8"?>
<projectDescription>
<name>TEST-STM32-MAC</name>
<comment></comment>
<projects>
</projects>
<buildSpec>
<buildCommand>
<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
<triggers>clean,full,incremental,</triggers>
<arguments>
<dictionary>
<key>?name?</key>
<value></value>
</dictionary>
<dictionary>
<key>org.eclipse.cdt.make.core.append_environment</key>
<value>true</value>
</dictionary>
<dictionary>
<key>org.eclipse.cdt.make.core.autoBuildTarget</key>
<value>all</value>
</dictionary>
<dictionary>
<key>org.eclipse.cdt.make.core.buildArguments</key>
<value></value>
</dictionary>
<dictionary>
<key>org.eclipse.cdt.make.core.buildCommand</key>
<value>mingw32-make</value>
</dictionary>
<dictionary>
<key>org.eclipse.cdt.make.core.cleanBuildTarget</key>
<value>clean</value>
</dictionary>
<dictionary>
<key>org.eclipse.cdt.make.core.contents</key>
<value>org.eclipse.cdt.make.core.activeConfigSettings</value>
</dictionary>
<dictionary>
<key>org.eclipse.cdt.make.core.enableAutoBuild</key>
<value>false</value>
</dictionary>
<dictionary>
<key>org.eclipse.cdt.make.core.enableCleanBuild</key>
<value>true</value>
</dictionary>
<dictionary>
<key>org.eclipse.cdt.make.core.enableFullBuild</key>
<value>true</value>
</dictionary>
<dictionary>
<key>org.eclipse.cdt.make.core.fullBuildTarget</key>
<value>all</value>
</dictionary>
<dictionary>
<key>org.eclipse.cdt.make.core.stopOnError</key>
<value>true</value>
</dictionary>
<dictionary>
<key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key>
<value>false</value>
</dictionary>
</arguments>
</buildCommand>
<buildCommand>
<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
<triggers>full,incremental,</triggers>
<arguments>
</arguments>
</buildCommand>
</buildSpec>
<natures>
<nature>org.eclipse.cdt.core.cnature</nature>
<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
</natures>
<linkedResources>
<link>
<name>os</name>
<type>2</type>
<location>C:/Projects/ChibiOS-RT/os</location>
</link>
</linkedResources>
</projectDescription>

203
testhal/STM32F1xx/MAC/Makefile Normal file
View File

@ -0,0 +1,203 @@
##############################################################################
# Build global options
# NOTE: Can be overridden externally.
#
# Compiler options here.
ifeq ($(USE_OPT),)
USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
endif
# C++ specific options here (added to USE_OPT).
ifeq ($(USE_CPPOPT),)
USE_CPPOPT = -fno-rtti
endif
# Enable this if you want the linker to remove unused code and data
ifeq ($(USE_LINK_GC),)
USE_LINK_GC = yes
endif
# If enabled, this option allows to compile the application in THUMB mode.
ifeq ($(USE_THUMB),)
USE_THUMB = yes
endif
# Enable register caching optimization (read documentation).
ifeq ($(USE_CURRP_CACHING),)
USE_CURRP_CACHING = no
endif
#
# Build global options
##############################################################################
##############################################################################
# Architecture or project specific options
#
# Enable this if you really want to use the STM FWLib.
ifeq ($(USE_FWLIB),)
USE_FWLIB = no
endif
#
# Architecture or project specific options
##############################################################################
##############################################################################
# Project, sources and paths
#
# Define project name here
PROJECT = ch
# Imported source files and paths
CHIBIOS = ../../..
include $(CHIBIOS)/boards/OLIMEX_STM32_P107/board.mk
include $(CHIBIOS)/os/hal/platforms/STM32F1xx/platform.mk
include $(CHIBIOS)/os/hal/hal.mk
include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F1xx/port.mk
include $(CHIBIOS)/os/kernel/kernel.mk
# Define linker script file here
LDSCRIPT= $(PORTLD)/STM32F103xB.ld
# C sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
CSRC = $(PORTSRC) \
$(KERNSRC) \
$(TESTSRC) \
$(HALSRC) \
$(PLATFORMSRC) \
$(BOARDSRC) \
$(CHIBIOS)/os/various/evtimer.c \
$(CHIBIOS)/os/various/syscalls.c \
main.c
# C++ sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
CPPSRC =
# C sources to be compiled in ARM mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
# option that results in lower performance and larger code size.
ACSRC =
# C++ sources to be compiled in ARM mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
# option that results in lower performance and larger code size.
ACPPSRC =
# C sources to be compiled in THUMB mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
# option that results in lower performance and larger code size.
TCSRC =
# C sources to be compiled in THUMB mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
# option that results in lower performance and larger code size.
TCPPSRC =
# List ASM source files here
ASMSRC = $(PORTASM)
INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \
$(HALINC) $(PLATFORMINC) $(BOARDINC) \
$(CHIBIOS)/os/various
#
# Project, sources and paths
##############################################################################
##############################################################################
# Compiler settings
#
MCU = cortex-m3
#TRGT = arm-elf-
TRGT = arm-none-eabi-
CC = $(TRGT)gcc
CPPC = $(TRGT)g++
# Enable loading with g++ only if you need C++ runtime support.
# NOTE: You can use C++ even without C++ support if you are careful. C++
# runtime support makes code size explode.
LD = $(TRGT)gcc
#LD = $(TRGT)g++
CP = $(TRGT)objcopy
AS = $(TRGT)gcc -x assembler-with-cpp
OD = $(TRGT)objdump
HEX = $(CP) -O ihex
BIN = $(CP) -O binary
# ARM-specific options here
AOPT =
# THUMB-specific options here
TOPT = -mthumb -DTHUMB
# Define C warning options here
CWARN = -Wall -Wextra -Wstrict-prototypes
# Define C++ warning options here
CPPWARN = -Wall -Wextra
#
# Compiler settings
##############################################################################
##############################################################################
# Start of default section
#
# List all default C defines here, like -D_DEBUG=1
DDEFS =
# List all default ASM defines here, like -D_DEBUG=1
DADEFS =
# List all default directories to look for include files here
DINCDIR =
# List the default directory to look for the libraries here
DLIBDIR =
# List all default libraries here
DLIBS =
#
# End of default section
##############################################################################
##############################################################################
# Start of user section
#
# List all user C define here, like -D_DEBUG=1
UDEFS =
# Define ASM defines here
UADEFS =
# List all user directories here
UINCDIR =
# List the user directory to look for the libraries here
ULIBDIR =
# List all user libraries here
ULIBS =
#
# End of user defines
##############################################################################
ifeq ($(USE_FWLIB),yes)
include $(CHIBIOS)/ext/stm32lib/stm32lib.mk
CSRC += $(STM32SRC)
INCDIR += $(STM32INC)
USE_OPT += -DUSE_STDPERIPH_DRIVER
endif
include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk

535
testhal/STM32F1xx/MAC/chconf.h Normal file
View File

@ -0,0 +1,535 @@
/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
2011 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/**
* @file templates/chconf.h
* @brief Configuration file template.
* @details A copy of this file must be placed in each project directory, it
* contains the application specific kernel settings.
*
* @addtogroup config
* @details Kernel related settings and hooks.
* @{
*/
#ifndef _CHCONF_H_
#define _CHCONF_H_
/*===========================================================================*/
/**
* @name Kernel parameters and options
* @{
*/
/*===========================================================================*/
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__)
#define CH_FREQUENCY 1000
#endif
/**
* @brief Round robin interval.
* @details This constant is the number of system ticks allowed for the
* threads before preemption occurs. Setting this value to zero
* disables the preemption for threads with equal priority and the
* round robin becomes cooperative. Note that higher priority
* threads can still preempt, the kernel is always preemptive.
*
* @note Disabling the round robin preemption makes the kernel more compact
* and generally faster.
*/
#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__)
#define CH_TIME_QUANTUM 20
#endif
/**
* @brief Managed RAM size.
* @details Size of the RAM area to be managed by the OS. If set to zero
* then the whole available RAM is used. The core memory is made
* available to the heap allocator and/or can be used directly through
* the simplified core memory allocator.
*
* @note In order to let the OS manage the whole RAM the linker script must
* provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_USE_MEMCORE.
*/
#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__)
#define CH_MEMCORE_SIZE 0
#endif
/**
* @brief Idle thread automatic spawn suppression.
* @details When this option is activated the function @p chSysInit()
* does not spawn the idle thread automatically. The application has
* then the responsibility to do one of the following:
* - Spawn a custom idle thread at priority @p IDLEPRIO.
* - Change the main() thread priority to @p IDLEPRIO then enter
* an endless loop. In this scenario the @p main() thread acts as
* the idle thread.
* .
* @note Unless an idle thread is spawned the @p main() thread must not
* enter a sleep state.
*/
#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__)
#define CH_NO_IDLE_THREAD FALSE
#endif
/** @} */
/*===========================================================================*/
/**
* @name Performance options
* @{
*/
/*===========================================================================*/
/**
* @brief OS optimization.
* @details If enabled then time efficient rather than space efficient code
* is used when two possible implementations exist.
*
* @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__)
#define CH_OPTIMIZE_SPEED TRUE
#endif
/** @} */
/*===========================================================================*/
/**
* @name Subsystem options
* @{
*/
/*===========================================================================*/
/**
* @brief Threads registry APIs.
* @details If enabled then the registry APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__)
#define CH_USE_REGISTRY TRUE
#endif
/**
* @brief Threads synchronization APIs.
* @details If enabled then the @p chThdWait() function is included in
* the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__)
#define CH_USE_WAITEXIT TRUE
#endif
/**
* @brief Semaphores APIs.
* @details If enabled then the Semaphores APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__)
#define CH_USE_SEMAPHORES TRUE
#endif
/**
* @brief Semaphores queuing mode.
* @details If enabled then the threads are enqueued on semaphores by
* priority rather than in FIFO order.
*
* @note The default is @p FALSE. Enable this if you have special requirements.
* @note Requires @p CH_USE_SEMAPHORES.
*/
#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__)
#define CH_USE_SEMAPHORES_PRIORITY FALSE
#endif
/**
* @brief Atomic semaphore API.
* @details If enabled then the semaphores the @p chSemSignalWait() API
* is included in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_USE_SEMAPHORES.
*/
#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__)
#define CH_USE_SEMSW TRUE
#endif
/**
* @brief Mutexes APIs.
* @details If enabled then the mutexes APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__)
#define CH_USE_MUTEXES TRUE
#endif
/**
* @brief Conditional Variables APIs.
* @details If enabled then the conditional variables APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_USE_MUTEXES.
*/
#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__)
#define CH_USE_CONDVARS TRUE
#endif
/**
* @brief Conditional Variables APIs with timeout.
* @details If enabled then the conditional variables APIs with timeout
* specification are included in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_USE_CONDVARS.
*/
#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__)
#define CH_USE_CONDVARS_TIMEOUT TRUE
#endif
/**
* @brief Events Flags APIs.
* @details If enabled then the event flags APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__)
#define CH_USE_EVENTS TRUE
#endif
/**
* @brief Events Flags APIs with timeout.
* @details If enabled then the events APIs with timeout specification
* are included in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_USE_EVENTS.
*/
#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__)
#define CH_USE_EVENTS_TIMEOUT TRUE
#endif
/**
* @brief Synchronous Messages APIs.
* @details If enabled then the synchronous messages APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__)
#define CH_USE_MESSAGES TRUE
#endif
/**
* @brief Synchronous Messages queuing mode.
* @details If enabled then messages are served by priority rather than in
* FIFO order.
*
* @note The default is @p FALSE. Enable this if you have special requirements.
* @note Requires @p CH_USE_MESSAGES.
*/
#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__)
#define CH_USE_MESSAGES_PRIORITY FALSE
#endif
/**
* @brief Mailboxes APIs.
* @details If enabled then the asynchronous messages (mailboxes) APIs are
* included in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_USE_SEMAPHORES.
*/
#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__)
#define CH_USE_MAILBOXES TRUE
#endif
/**
* @brief I/O Queues APIs.
* @details If enabled then the I/O queues APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__)
#define CH_USE_QUEUES TRUE
#endif
/**
* @brief Core Memory Manager APIs.
* @details If enabled then the core memory manager APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__)
#define CH_USE_MEMCORE TRUE
#endif
/**
* @brief Heap Allocator APIs.
* @details If enabled then the memory heap allocator APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or
* @p CH_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__)
#define CH_USE_HEAP TRUE
#endif
/**
* @brief C-runtime allocator.
* @details If enabled the the heap allocator APIs just wrap the C-runtime
* @p malloc() and @p free() functions.
*
* @note The default is @p FALSE.
* @note Requires @p CH_USE_HEAP.
* @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the
* appropriate documentation.
*/
#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__)
#define CH_USE_MALLOC_HEAP FALSE
#endif
/**
* @brief Memory Pools Allocator APIs.
* @details If enabled then the memory pools allocator APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__)
#define CH_USE_MEMPOOLS TRUE
#endif
/**
* @brief Dynamic Threads APIs.
* @details If enabled then the dynamic threads creation APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_USE_WAITEXIT.
* @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS.
*/
#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__)
#define CH_USE_DYNAMIC TRUE
#endif
/** @} */
/*===========================================================================*/
/**
* @name Debug options
* @{
*/
/*===========================================================================*/
/**
* @brief Debug option, system state check.
* @details If enabled the correct call protocol for system APIs is checked
* at runtime.
*
* @note The default is @p FALSE.
*/
#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__)
#define CH_DBG_SYSTEM_STATE_CHECK TRUE
#endif
/**
* @brief Debug option, parameters checks.
* @details If enabled then the checks on the API functions input
* parameters are activated.
*
* @note The default is @p FALSE.
*/
#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__)
#define CH_DBG_ENABLE_CHECKS TRUE
#endif
/**
* @brief Debug option, consistency checks.
* @details If enabled then all the assertions in the kernel code are
* activated. This includes consistency checks inside the kernel,
* runtime anomalies and port-defined checks.
*
* @note The default is @p FALSE.
*/
#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__)
#define CH_DBG_ENABLE_ASSERTS TRUE
#endif
/**
* @brief Debug option, trace buffer.
* @details If enabled then the context switch circular trace buffer is
* activated.
*
* @note The default is @p FALSE.
*/
#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__)
#define CH_DBG_ENABLE_TRACE TRUE
#endif
/**
* @brief Debug option, stack checks.
* @details If enabled then a runtime stack check is performed.
*
* @note The default is @p FALSE.
* @note The stack check is performed in a architecture/port dependent way.
* It may not be implemented or some ports.
* @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__)
#define CH_DBG_ENABLE_STACK_CHECK TRUE
#endif
/**
* @brief Debug option, stacks initialization.
* @details If enabled then the threads working area is filled with a byte
* value when a thread is created. This can be useful for the
* runtime measurement of the used stack.
*
* @note The default is @p FALSE.
*/
#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__)
#define CH_DBG_FILL_THREADS TRUE
#endif
/**
* @brief Debug option, threads profiling.
* @details If enabled then a field is added to the @p Thread structure that
* counts the system ticks occurred while executing the thread.
*
* @note The default is @p TRUE.
* @note This debug option is defaulted to TRUE because it is required by
* some test cases into the test suite.
*/
#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__)
#define CH_DBG_THREADS_PROFILING TRUE
#endif
/** @} */
/*===========================================================================*/
/**
* @name Kernel hooks
* @{
*/
/*===========================================================================*/
/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p Thread structure.
*/
#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__)
#define THREAD_EXT_FIELDS \
/* Add threads custom fields here.*/
#endif
/**
* @brief Threads initialization hook.
* @details User initialization code added to the @p chThdInit() API.
*
* @note It is invoked from within @p chThdInit() and implicitily from all
* the threads creation APIs.
*/
#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__)
#define THREAD_EXT_INIT_HOOK(tp) { \
/* Add threads initialization code here.*/ \
}
#endif
/**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
*
* @note It is inserted into lock zone.
* @note It is also invoked when the threads simply return in order to
* terminate.
*/
#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__)
#define THREAD_EXT_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
}
#endif
/**
* @brief Context switch hook.
* @details This hook is invoked just before switching between threads.
*/
#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__)
#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \
/* System halt code here.*/ \
}
#endif
/**
* @brief Idle Loop hook.
* @details This hook is continuously invoked by the idle thread loop.
*/
#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__)
#define IDLE_LOOP_HOOK() { \
/* Idle loop code here.*/ \
}
#endif
/**
* @brief System tick event hook.
* @details This hook is invoked in the system tick handler immediately
* after processing the virtual timers queue.
*/
#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__)
#define SYSTEM_TICK_EVENT_HOOK() { \
/* System tick event code here.*/ \
}
#endif
/**
* @brief System halt hook.
* @details This hook is invoked in case to a system halting error before
* the system is halted.
*/
#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__)
#define SYSTEM_HALT_HOOK() { \
/* System halt code here.*/ \
}
#endif
/** @} */
/*===========================================================================*/
/* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
#endif /* _CHCONF_H_ */
/** @} */

328
testhal/STM32F1xx/MAC/halconf.h Normal file
View File

@ -0,0 +1,328 @@
/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
2011 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/**
* @file templates/halconf.h
* @brief HAL configuration header.
* @details HAL configuration file, this file allows to enable or disable the
* various device drivers from your application. You may also use
* this file in order to override the device drivers default settings.
*
* @addtogroup HAL_CONF
* @{
*/
#ifndef _HALCONF_H_
#define _HALCONF_H_
#include "mcuconf.h"
/**
* @brief Enables the PAL subsystem.
*/
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
#define HAL_USE_PAL TRUE
#endif
/**
* @brief Enables the ADC subsystem.
*/
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
#define HAL_USE_ADC FALSE
#endif
/**
* @brief Enables the CAN subsystem.
*/
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
#define HAL_USE_CAN FALSE
#endif
/**
* @brief Enables the EXT subsystem.
*/
#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
#define HAL_USE_EXT FALSE
#endif
/**
* @brief Enables the GPT subsystem.
*/
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
#define HAL_USE_GPT FALSE
#endif
/**
* @brief Enables the I2C subsystem.
*/
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
#define HAL_USE_I2C FALSE
#endif
/**
* @brief Enables the ICU subsystem.
*/
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
#define HAL_USE_ICU FALSE
#endif
/**
* @brief Enables the MAC subsystem.
*/
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
#define HAL_USE_MAC TRUE
#endif
/**
* @brief Enables the MMC_SPI subsystem.
*/
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
#define HAL_USE_MMC_SPI FALSE
#endif
/**
* @brief Enables the PWM subsystem.
*/
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
#define HAL_USE_PWM FALSE
#endif
/**
* @brief Enables the SDC subsystem.
*/
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
#define HAL_USE_SDC FALSE
#endif
/**
* @brief Enables the SERIAL subsystem.
*/
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
#define HAL_USE_SERIAL FALSE
#endif
/**
* @brief Enables the SERIAL over USB subsystem.
*/
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
#define HAL_USE_SERIAL_USB FALSE
#endif
/**
* @brief Enables the SPI subsystem.
*/
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
#define HAL_USE_SPI FALSE
#endif
/**
* @brief Enables the UART subsystem.
*/
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
#define HAL_USE_UART FALSE
#endif
/**
* @brief Enables the USB subsystem.
*/
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
#define HAL_USE_USB FALSE
#endif
/*===========================================================================*/
/* ADC driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
#define ADC_USE_WAIT TRUE
#endif
/**
* @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define ADC_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
/* CAN driver related settings. */
/*===========================================================================*/
/**
* @brief Sleep mode related APIs inclusion switch.
*/
#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
#define CAN_USE_SLEEP_MODE TRUE
#endif
/*===========================================================================*/
/* I2C driver related settings. */
/*===========================================================================*/
/**
* @brief Enables the mutual exclusion APIs on the I2C bus.
*/
#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define I2C_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
/* MAC driver related settings. */
/*===========================================================================*/
/**
* @brief Enables an event sources for incoming packets.
*/
#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
#define MAC_USE_EVENTS TRUE
#endif
/*===========================================================================*/
/* MMC_SPI driver related settings. */
/*===========================================================================*/
/**
* @brief Block size for MMC transfers.
*/
#if !defined(MMC_SECTOR_SIZE) || defined(__DOXYGEN__)
#define MMC_SECTOR_SIZE 512
#endif
/**
* @brief Delays insertions.
* @details If enabled this options inserts delays into the MMC waiting
* routines releasing some extra CPU time for the threads with
* lower priority, this may slow down the driver a bit however.
* This option is recommended also if the SPI driver does not
* use a DMA channel and heavily loads the CPU.
*/
#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
#define MMC_NICE_WAITING TRUE
#endif
/**
* @brief Number of positive insertion queries before generating the
* insertion event.
*/
#if !defined(MMC_POLLING_INTERVAL) || defined(__DOXYGEN__)
#define MMC_POLLING_INTERVAL 10
#endif
/**
* @brief Interval, in milliseconds, between insertion queries.
*/
#if !defined(MMC_POLLING_DELAY) || defined(__DOXYGEN__)
#define MMC_POLLING_DELAY 10
#endif
/**
* @brief Uses the SPI polled API for small data transfers.
* @details Polled transfers usually improve performance because it
* saves two context switches and interrupt servicing. Note
* that this option has no effect on large transfers which
* are always performed using DMAs/IRQs.
*/
#if !defined(MMC_USE_SPI_POLLING) || defined(__DOXYGEN__)
#define MMC_USE_SPI_POLLING TRUE
#endif
/*===========================================================================*/
/* SDC driver related settings. */
/*===========================================================================*/
/**
* @brief Number of initialization attempts before rejecting the card.
* @note Attempts are performed at 10mS intevals.
*/
#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
#define SDC_INIT_RETRY 100
#endif
/**
* @brief Include support for MMC cards.
* @note MMC support is not yet implemented so this option must be kept
* at @p FALSE.
*/
#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
#define SDC_MMC_SUPPORT FALSE
#endif
/**
* @brief Delays insertions.
* @details If enabled this options inserts delays into the MMC waiting
* routines releasing some extra CPU time for the threads with
* lower priority, this may slow down the driver a bit however.
*/
#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
#define SDC_NICE_WAITING TRUE
#endif
/*===========================================================================*/
/* SERIAL driver related settings. */
/*===========================================================================*/
/**
* @brief Default bit rate.
* @details Configuration parameter, this is the baud rate selected for the
* default configuration.
*/
#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
#define SERIAL_DEFAULT_BITRATE 38400
#endif
/**
* @brief Serial buffers size.
* @details Configuration parameter, you can change the depth of the queue
* buffers depending on the requirements of your application.
* @note The default is 64 bytes for both the transmission and receive
* buffers.
*/
#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
#define SERIAL_BUFFERS_SIZE 16
#endif
/*===========================================================================*/
/* SPI driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
#define SPI_USE_WAIT TRUE
#endif
/**
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define SPI_USE_MUTUAL_EXCLUSION TRUE
#endif
#endif /* _HALCONF_H_ */
/** @} */

119
testhal/STM32F1xx/MAC/main.c Normal file
View File

@ -0,0 +1,119 @@
/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
2011 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "ch.h"
#include "hal.h"
static VirtualTimer vt;
/* LED set to OFF after 200mS.*/
static void ledoff(void *arg) {
(void)arg;
palSetPad(GPIOC, GPIOC_LED);
}
/* Triggered when the button is pressed or released. The LED is set to ON.*/
static void extcb1(EXTDriver *extp, expchannel_t channel) {
(void)extp;
(void)channel;
palClearPad(GPIOC, GPIOC_LED);
chSysLockFromIsr();
if (!chVTIsArmedI(&vt))
chVTSetI(&vt, MS2ST(200), ledoff, NULL);
chSysUnlockFromIsr();
}
/* Triggered when the LED goes OFF.*/
static void extcb2(EXTDriver *extp, expchannel_t channel) {
(void)extp;
(void)channel;
}
static const EXTConfig extcfg = {
{
{EXT_CH_MODE_BOTH_EDGES | EXT_CH_MODE_AUTOSTART, extcb1},
{EXT_CH_MODE_DISABLED, NULL},
{EXT_CH_MODE_DISABLED, NULL},
{EXT_CH_MODE_DISABLED, NULL},
{EXT_CH_MODE_DISABLED, NULL},
{EXT_CH_MODE_DISABLED, NULL},
{EXT_CH_MODE_DISABLED, NULL},
{EXT_CH_MODE_DISABLED, NULL},
{EXT_CH_MODE_DISABLED, NULL},
{EXT_CH_MODE_DISABLED, NULL},
{EXT_CH_MODE_DISABLED, NULL},
{EXT_CH_MODE_DISABLED, NULL},
{EXT_CH_MODE_RISING_EDGE | EXT_CH_MODE_AUTOSTART, extcb2},
{EXT_CH_MODE_DISABLED, NULL},
{EXT_CH_MODE_DISABLED, NULL},
{EXT_CH_MODE_DISABLED, NULL},
},
EXT_MODE_EXTI(EXT_MODE_GPIOA,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
EXT_MODE_GPIOC,
0,
0,
0)
};
/*
* Application entry point.
*/
int main(void) {
/*
* System initializations.
* - HAL initialization, this also initializes the configured device drivers
* and performs the board-specific initializations.
* - Kernel initialization, the main() function becomes a thread and the
* RTOS is active.
*/
halInit();
chSysInit();
/*
* Activates the EXT driver 1.
*/
extStart(&EXTD1, &extcfg);
/*
* Normal main() thread activity, in this demo it enables and disables the
* button EXT channel using 5 seconds intervals.
*/
while (TRUE) {
chThdSleepMilliseconds(5000);
extChannelDisable(&EXTD1, 0);
chThdSleepMilliseconds(5000);
extChannelEnable(&EXTD1, 0);
}
}

182
testhal/STM32F1xx/MAC/mcuconf.h Normal file
View File

@ -0,0 +1,182 @@
/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
2011 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
* STM32 drivers configuration.
* The following settings override the default settings present in
* the various device driver implementation headers.
* Note that the settings for each driver only have effect if the whole
* driver is enabled in halconf.h.
*
* IRQ priorities:
* 15...0 Lowest...Highest.
*
* DMA priorities:
* 0...3 Lowest...Highest.
*/
/*
* HAL driver system settings.
*/
#define STM32_ACTIVATE_PLL1 TRUE
#define STM32_ACTIVATE_PLL2 TRUE
#define STM32_ACTIVATE_PLL3 TRUE
#define STM32_SW STM32_SW_PLL
#define STM32_PLLSRC STM32_PLLSRC_PREDIV1
#define STM32_PREDIV1SRC STM32_PREDIV1SRC_PLL2
#define STM32_PREDIV1_VALUE 5
#define STM32_PLLMUL_VALUE 9
#define STM32_PREDIV2_VALUE 5
#define STM32_PLL2MUL_VALUE 8
#define STM32_PLL3MUL_VALUE 10
#define STM32_HPRE STM32_HPRE_DIV1
#define STM32_PPRE1 STM32_PPRE1_DIV2
#define STM32_PPRE2 STM32_PPRE2_DIV2
#define STM32_ADCPRE STM32_ADCPRE_DIV4
#define STM32_OTGFSPRE STM32_OTGFSPRE_DIV3
#define STM32_MCO STM32_MCO_PLL3
/*
* ADC driver system settings.
*/
#define STM32_ADC_USE_ADC1 TRUE
#define STM32_ADC_ADC1_DMA_PRIORITY 2
#define STM32_ADC_ADC1_IRQ_PRIORITY 5
#define STM32_ADC_DMA_ERROR_HOOK(adcp) chSysHalt()
/*
* CAN driver system settings.
*/
#define STM32_CAN_USE_CAN1 TRUE
#define STM32_CAN_CAN1_IRQ_PRIORITY 11
/*
* EXT driver system settings.
*/
#define STM32_EXT_EXTI0_IRQ_PRIORITY 6
#define STM32_EXT_EXTI1_IRQ_PRIORITY 6
#define STM32_EXT_EXTI2_IRQ_PRIORITY 6
#define STM32_EXT_EXTI3_IRQ_PRIORITY 6
#define STM32_EXT_EXTI4_IRQ_PRIORITY 6
#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6
#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6
#define STM32_EXT_EXTI16_IRQ_PRIORITY 6
#define STM32_EXT_EXTI17_IRQ_PRIORITY 6
#define STM32_EXT_EXTI18_IRQ_PRIORITY 6
#define STM32_EXT_EXTI19_IRQ_PRIORITY 6
/*
* GPT driver system settings.
*/
#define STM32_GPT_USE_TIM1 FALSE
#define STM32_GPT_USE_TIM2 FALSE
#define STM32_GPT_USE_TIM3 FALSE
#define STM32_GPT_USE_TIM4 FALSE
#define STM32_GPT_USE_TIM5 FALSE
#define STM32_GPT_USE_TIM8 FALSE
#define STM32_GPT_TIM1_IRQ_PRIORITY 7
#define STM32_GPT_TIM2_IRQ_PRIORITY 7
#define STM32_GPT_TIM3_IRQ_PRIORITY 7
#define STM32_GPT_TIM4_IRQ_PRIORITY 7
#define STM32_GPT_TIM5_IRQ_PRIORITY 7
#define STM32_GPT_TIM8_IRQ_PRIORITY 7
/*
* ICU driver system settings.
*/
#define STM32_ICU_USE_TIM1 FALSE
#define STM32_ICU_USE_TIM2 FALSE
#define STM32_ICU_USE_TIM3 FALSE
#define STM32_ICU_USE_TIM4 TRUE
#define STM32_ICU_USE_TIM5 FALSE
#define STM32_ICU_USE_TIM8 FALSE
#define STM32_ICU_TIM1_IRQ_PRIORITY 7
#define STM32_ICU_TIM2_IRQ_PRIORITY 7
#define STM32_ICU_TIM3_IRQ_PRIORITY 7
#define STM32_ICU_TIM4_IRQ_PRIORITY 7
#define STM32_ICU_TIM5_IRQ_PRIORITY 7
#define STM32_ICU_TIM8_IRQ_PRIORITY 7
/*
* PWM driver system settings.
*/
#define STM32_PWM_USE_ADVANCED TRUE
#define STM32_PWM_USE_TIM1 TRUE
#define STM32_PWM_USE_TIM2 FALSE
#define STM32_PWM_USE_TIM3 FALSE
#define STM32_PWM_USE_TIM4 FALSE
#define STM32_PWM_USE_TIM5 FALSE
#define STM32_PWM_USE_TIM8 FALSE
#define STM32_PWM_TIM1_IRQ_PRIORITY 7
#define STM32_PWM_TIM2_IRQ_PRIORITY 7
#define STM32_PWM_TIM3_IRQ_PRIORITY 7
#define STM32_PWM_TIM4_IRQ_PRIORITY 7
#define STM32_PWM_TIM5_IRQ_PRIORITY 7
#define STM32_PWM_TIM8_IRQ_PRIORITY 7
/*
* SERIAL driver system settings.
*/
#define STM32_SERIAL_USE_USART1 FALSE
#define STM32_SERIAL_USE_USART2 FALSE
#define STM32_SERIAL_USE_USART3 TRUE
#define STM32_SERIAL_USE_UART4 FALSE
#define STM32_SERIAL_USE_UART5 FALSE
#define STM32_SERIAL_USART1_PRIORITY 12
#define STM32_SERIAL_USART2_PRIORITY 12
#define STM32_SERIAL_USART3_PRIORITY 12
#define STM32_SERIAL_UART4_PRIORITY 12
#define STM32_SERIAL_UART5_PRIORITY 12
/*
* SPI driver system settings.
*/
#define STM32_SPI_USE_SPI1 FALSE
#define STM32_SPI_USE_SPI2 FALSE
#define STM32_SPI_USE_SPI3 TRUE
#define STM32_SPI_SPI1_DMA_PRIORITY 1
#define STM32_SPI_SPI2_DMA_PRIORITY 1
#define STM32_SPI_SPI3_DMA_PRIORITY 1
#define STM32_SPI_SPI1_IRQ_PRIORITY 10
#define STM32_SPI_SPI2_IRQ_PRIORITY 10
#define STM32_SPI_SPI3_IRQ_PRIORITY 10
#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt()
/*
* UART driver system settings.
*/
#define STM32_UART_USE_USART1 FALSE
#define STM32_UART_USE_USART2 TRUE
#define STM32_UART_USE_USART3 FALSE
#define STM32_UART_USART1_IRQ_PRIORITY 12
#define STM32_UART_USART2_IRQ_PRIORITY 12
#define STM32_UART_USART3_IRQ_PRIORITY 12
#define STM32_UART_USART1_DMA_PRIORITY 0
#define STM32_UART_USART2_DMA_PRIORITY 0
#define STM32_UART_USART3_DMA_PRIORITY 0
#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt()
/*
* USB driver system settings.
*/
#define STM32_USB_USE_USB1 TRUE
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
#define STM32_USB_USB1_HP_IRQ_PRIORITY 6
#define STM32_USB_USB1_LP_IRQ_PRIORITY 14

26
testhal/STM32F1xx/MAC/readme.txt Normal file
View File

@ -0,0 +1,26 @@
*****************************************************************************
** ChibiOS/RT HAL - MAC driver demo for STM32. **
*****************************************************************************
** TARGET **
The demo runs on an Olimex STM32-P107 board.
** The Demo **
The application demonstrates the use of the STM32 MAC driver.
** Build Procedure **
The demo has been tested by using the free Codesourcery GCC-based toolchain
and YAGARTO.
Just modify the TRGT line in the makefile in order to use different GCC ports.
** Notes **
Some files used by the demo are not part of ChibiOS/RT but are copyright of
ST Microelectronics and are licensed under a different license.
Also note that not all the files present in the ST library are distribited
with ChibiOS/RT, you can find the whole library on the ST web site:
http://www.st.com