ChibiOS/testhal/STM32/STM32F4xx/SPI-LIS302DL
Rocco Marco Guglielmi 6e77c0510d Enabled FPU in ChibiOS/EX demos
git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@9498 35acf78f-673a-0410-8e92-d51de3d6d3f4
2016-05-21 14:52:32 +00:00
..
debug EX: added support for LIS302DL 2016-05-10 17:08:27 +00:00
.cproject EX: added support for LIS302DL 2016-05-10 17:08:27 +00:00
.project EX: added support for LIS302DL 2016-05-10 17:08:27 +00:00
Makefile Enabled FPU in ChibiOS/EX demos 2016-05-21 14:52:32 +00:00
chconf.h EX: added support for LIS302DL 2016-05-10 17:08:27 +00:00
halconf.h Mass update of configuration files with QSPI settings. 2016-05-15 09:18:27 +00:00
main.c Fixes an improvements to EX demos 2016-05-12 21:01:59 +00:00
mcuconf.h EX: added support for LIS302DL 2016-05-10 17:08:27 +00:00
readme.txt Small fixes 2016-05-12 16:56:39 +00:00
usbcfg.c EX: added support for LIS302DL 2016-05-10 17:08:27 +00:00
usbcfg.h EX: added support for LIS302DL 2016-05-10 17:08:27 +00:00

readme.txt

*****************************************************************************
** ChibiOS/HAL + ChibiOS/EX - SPI + LIS302L demo for STM32F4xx.            **
*****************************************************************************

** TARGET **

The demo runs on an STM32F407 Discovery board rev MB997B.

** The Demo **

The demo flashes the board LED using a thread, read data from LIS302L printing
it on a BaseSequentialStream (SDU1, mapped on USB virtual COM port).

** Build Procedure **

The demo has been tested by using the free Codesourcery GCC-based toolchain
and YAGARTO.
Just modify the TRGT line in the makefile in order to use different GCC ports.

** Notes **

Some files used by the demo are not part of ChibiOS/RT but are copyright of
ST Microelectronics and are licensed under a different license.
Also note that not all the files present in the ST library are distributed
with ChibiOS/RT, you can find the whole library on the ST web site:

                             http://www.st.com