andreika-git
/
ChibiOS
mirror of https://github.com/andreika-git/ChibiOS.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
ChibiOS/os/hal/platforms/STM32/GPIOv2/pal_lld.h

458 lines
13 KiB
C
Raw Blame History

/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
2011,2012,2013 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/**
* @file STM32/GPIOv2/pal_lld.h
* @brief STM32L1xx/STM32F2xx/STM32F4xx GPIO low level driver header.
*
* @addtogroup PAL
* @{
*/
#ifndef _PAL_LLD_H_
#define _PAL_LLD_H_
#if HAL_USE_PAL || defined(__DOXYGEN__)
/*===========================================================================*/
/* Unsupported modes and specific modes */
/*===========================================================================*/
#undef PAL_MODE_RESET
#undef PAL_MODE_UNCONNECTED
#undef PAL_MODE_INPUT
#undef PAL_MODE_INPUT_PULLUP
#undef PAL_MODE_INPUT_PULLDOWN
#undef PAL_MODE_INPUT_ANALOG
#undef PAL_MODE_OUTPUT_PUSHPULL
#undef PAL_MODE_OUTPUT_OPENDRAIN
/**
* @name STM32-specific I/O mode flags
* @{
*/
#define PAL_STM32_MODE_MASK (3 << 0)
#define PAL_STM32_MODE_INPUT (0 << 0)
#define PAL_STM32_MODE_OUTPUT (1 << 0)
#define PAL_STM32_MODE_ALTERNATE (2 << 0)
#define PAL_STM32_MODE_ANALOG (3 << 0)
#define PAL_STM32_OTYPE_MASK (1 << 2)
#define PAL_STM32_OTYPE_PUSHPULL (0 << 2)
#define PAL_STM32_OTYPE_OPENDRAIN (1 << 2)
#define PAL_STM32_OSPEED_MASK (3 << 3)
#define PAL_STM32_OSPEED_LOWEST (0 << 3)
#if defined(STM32F0XX) || defined(STM32F30X) || defined(STM32F37X)
#define PAL_STM32_OSPEED_MID (1 << 3)
#else
#define PAL_STM32_OSPEED_MID1 (1 << 3)
#define PAL_STM32_OSPEED_MID2 (2 << 3)
#endif
#define PAL_STM32_OSPEED_HIGHEST (3 << 3)
#define PAL_STM32_PUDR_MASK (3 << 5)
#define PAL_STM32_PUDR_FLOATING (0 << 5)
#define PAL_STM32_PUDR_PULLUP (1 << 5)
#define PAL_STM32_PUDR_PULLDOWN (2 << 5)
#define PAL_STM32_ALTERNATE_MASK (15 << 7)
#define PAL_STM32_ALTERNATE(n) ((n) << 7)
/**
* @brief Alternate function.
*
* @param[in] n alternate function selector
*/
#define PAL_MODE_ALTERNATE(n) (PAL_STM32_MODE_ALTERNATE | \
PAL_STM32_ALTERNATE(n))
/** @} */
/**
* @name Standard I/O mode flags
* @{
*/
/**
* @brief This mode is implemented as input.
*/
#define PAL_MODE_RESET PAL_STM32_MODE_INPUT
/**
* @brief This mode is implemented as input with pull-up.
*/
#define PAL_MODE_UNCONNECTED PAL_MODE_INPUT_PULLUP
/**
* @brief Regular input high-Z pad.
*/
#define PAL_MODE_INPUT PAL_STM32_MODE_INPUT
/**
* @brief Input pad with weak pull up resistor.
*/
#define PAL_MODE_INPUT_PULLUP (PAL_STM32_MODE_INPUT | \
PAL_STM32_PUDR_PULLUP)
/**
* @brief Input pad with weak pull down resistor.
*/
#define PAL_MODE_INPUT_PULLDOWN (PAL_STM32_MODE_INPUT | \
PAL_STM32_PUDR_PULLDOWN)
/**
* @brief Analog input mode.
*/
#define PAL_MODE_INPUT_ANALOG PAL_STM32_MODE_ANALOG
/**
* @brief Push-pull output pad.
*/
#define PAL_MODE_OUTPUT_PUSHPULL (PAL_STM32_MODE_OUTPUT | \
PAL_STM32_OTYPE_PUSHPULL)
/**
* @brief Open-drain output pad.
*/
#define PAL_MODE_OUTPUT_OPENDRAIN (PAL_STM32_MODE_OUTPUT | \
PAL_STM32_OTYPE_OPENDRAIN)
/** @} */
/*===========================================================================*/
/* I/O Ports Types and constants. */
/*===========================================================================*/
/**
* @brief STM32 GPIO registers block.
*/
typedef struct {
volatile uint32_t MODER;
volatile uint32_t OTYPER;
volatile uint32_t OSPEEDR;
volatile uint32_t PUPDR;
volatile uint32_t IDR;
volatile uint32_t ODR;
volatile union {
uint32_t W;
struct {
uint16_t set;
uint16_t clear;
} H;
} BSRR;
volatile uint32_t LCKR;
volatile uint32_t AFRL;
volatile uint32_t AFRH;
} GPIO_TypeDef;
/**
* @brief GPIO port setup info.
*/
typedef struct {
/** Initial value for MODER register.*/
uint32_t moder;
/** Initial value for OTYPER register.*/
uint32_t otyper;
/** Initial value for OSPEEDR register.*/
uint32_t ospeedr;
/** Initial value for PUPDR register.*/
uint32_t pupdr;
/** Initial value for ODR register.*/
uint32_t odr;
/** Initial value for AFRL register.*/
uint32_t afrl;
/** Initial value for AFRH register.*/
uint32_t afrh;
} stm32_gpio_setup_t;
/**
* @brief STM32 GPIO static initializer.
* @details An instance of this structure must be passed to @p palInit() at
* system startup time in order to initialize the digital I/O
* subsystem. This represents only the initial setup, specific pads
* or whole ports can be reprogrammed at later time.
*/
typedef struct {
/** @brief Port A setup data.*/
stm32_gpio_setup_t PAData;
/** @brief Port B setup data.*/
stm32_gpio_setup_t PBData;
/** @brief Port C setup data.*/
stm32_gpio_setup_t PCData;
/** @brief Port D setup data.*/
stm32_gpio_setup_t PDData;
#if STM32_HAS_GPIOE
/** @brief Port E setup data.*/
stm32_gpio_setup_t PEData;
#endif
#if STM32_HAS_GPIOF
/** @brief Port F setup data.*/
stm32_gpio_setup_t PFData;
#endif
#if STM32_HAS_GPIOG
/** @brief Port G setup data.*/
stm32_gpio_setup_t PGData;
#endif
#if STM32_HAS_GPIOH
/** @brief Port H setup data.*/
stm32_gpio_setup_t PHData;
#endif
#if STM32_HAS_GPIOI
/** @brief Port I setup data.*/
stm32_gpio_setup_t PIData;
#endif
} PALConfig;
/**
* @brief Width, in bits, of an I/O port.
*/
#define PAL_IOPORTS_WIDTH 16
/**
* @brief Whole port mask.
* @details This macro specifies all the valid bits into a port.
*/
#define PAL_WHOLE_PORT ((ioportmask_t)0xFFFF)
/**
* @brief Digital I/O port sized unsigned type.
*/
typedef uint32_t ioportmask_t;
/**
* @brief Digital I/O modes.
*/
typedef uint32_t iomode_t;
/**
* @brief Port Identifier.
* @details This type can be a scalar or some kind of pointer, do not make
* any assumption about it, use the provided macros when populating
* variables of this type.
*/
typedef GPIO_TypeDef * ioportid_t;
/*===========================================================================*/
/* I/O Ports Identifiers. */
/* The low level driver wraps the definitions already present in the STM32 */
/* firmware library. */
/*===========================================================================*/
/**
* @brief GPIO port A identifier.
*/
#if STM32_HAS_GPIOA || defined(__DOXYGEN__)
#define IOPORT1 GPIOA
#endif
/**
* @brief GPIO port B identifier.
*/
#if STM32_HAS_GPIOB || defined(__DOXYGEN__)
#define IOPORT2 GPIOB
#endif
/**
* @brief GPIO port C identifier.
*/
#if STM32_HAS_GPIOC || defined(__DOXYGEN__)
#define IOPORT3 GPIOC
#endif
/**
* @brief GPIO port D identifier.
*/
#if STM32_HAS_GPIOD || defined(__DOXYGEN__)
#define IOPORT4 GPIOD
#endif
/**
* @brief GPIO port E identifier.
*/
#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
#define IOPORT5 GPIOE
#endif
/**
* @brief GPIO port F identifier.
*/
#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
#define IOPORT6 GPIOF
#endif
/**
* @brief GPIO port G identifier.
*/
#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
#define IOPORT7 GPIOG
#endif
/**
* @brief GPIO port H identifier.
*/
#if STM32_HAS_GPIOH || defined(__DOXYGEN__)
#define IOPORT8 GPIOH
#endif
/**
* @brief GPIO port I identifier.
*/
#if STM32_HAS_GPIOI || defined(__DOXYGEN__)
#define IOPORT9 GPIOI
#endif
/*===========================================================================*/
/* Implementation, some of the following macros could be implemented as */
/* functions, if so please put them in pal_lld.c. */
/*===========================================================================*/
/**
* @brief GPIO ports subsystem initialization.
*
* @notapi
*/
#define pal_lld_init(config) _pal_lld_init(config)
/**
* @brief Reads an I/O port.
* @details This function is implemented by reading the GPIO IDR register, the
* implementation has no side effects.
* @note This function is not meant to be invoked directly by the application
* code.
*
* @param[in] port port identifier
* @return The port bits.
*
* @notapi
*/
#define pal_lld_readport(port) ((port)->IDR)
/**
* @brief Reads the output latch.
* @details This function is implemented by reading the GPIO ODR register, the
* implementation has no side effects.
* @note This function is not meant to be invoked directly by the application
* code.
*
* @param[in] port port identifier
* @return The latched logical states.
*
* @notapi
*/
#define pal_lld_readlatch(port) ((port)->ODR)
/**
* @brief Writes on a I/O port.
* @details This function is implemented by writing the GPIO ODR register, the
* implementation has no side effects.
*
* @param[in] port port identifier
* @param[in] bits bits to be written on the specified port
*
* @notapi
*/
#define pal_lld_writeport(port, bits) ((port)->ODR = (bits))
/**
* @brief Sets a bits mask on a I/O port.
* @details This function is implemented by writing the GPIO BSRR register, the
* implementation has no side effects.
*
* @param[in] port port identifier
* @param[in] bits bits to be ORed on the specified port
*
* @notapi
*/
#define pal_lld_setport(port, bits) ((port)->BSRR.H.set = (uint16_t)(bits))
/**
* @brief Clears a bits mask on a I/O port.
* @details This function is implemented by writing the GPIO BSRR register, the
* implementation has no side effects.
*
* @param[in] port port identifier
* @param[in] bits bits to be cleared on the specified port
*
* @notapi
*/
#define pal_lld_clearport(port, bits) ((port)->BSRR.H.clear = (uint16_t)(bits))
/**
* @brief Writes a group of bits.
* @details This function is implemented by writing the GPIO BSRR register, the
* implementation has no side effects.
*
* @param[in] port port identifier
* @param[in] mask group mask
* @param[in] offset the group bit offset within the port
* @param[in] bits bits to be written. Values exceeding the group
* width are masked.
*
* @notapi
*/
#define pal_lld_writegroup(port, mask, offset, bits) \
((port)->BSRR.W = ((~(bits) & (mask)) << (16 + (offset))) | \
(((bits) & (mask)) << (offset)))
/**
* @brief Pads group mode setup.
* @details This function programs a pads group belonging to the same port
* with the specified mode.
*
* @param[in] port port identifier
* @param[in] mask group mask
* @param[in] offset group bit offset within the port
* @param[in] mode group mode
*
* @notapi
*/
#define pal_lld_setgroupmode(port, mask, offset, mode) \
_pal_lld_setgroupmode(port, mask << offset, mode)
/**
* @brief Writes a logical state on an output pad.
*
* @param[in] port port identifier
* @param[in] pad pad number within the port
* @param[in] bit logical value, the value must be @p PAL_LOW or
* @p PAL_HIGH
*
* @notapi
*/
#define pal_lld_writepad(port, pad, bit) pal_lld_writegroup(port, 1, pad, bit)
extern const PALConfig pal_default_config;
#ifdef __cplusplus
extern "C" {
#endif
void _pal_lld_init(const PALConfig *config);
void _pal_lld_setgroupmode(ioportid_t port,
ioportmask_t mask,
iomode_t mode);
#ifdef __cplusplus
}
#endif
#endif /* HAL_USE_PAL */
#endif /* _PAL_LLD_H_ */
/** @} */
Reference in New Issue View Git Blame Copy Permalink