ChibiOS

History

Giovanni Di Sirio 5ad3d2426f Removed references to QSPI to most configuration files, more to do. git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@12330 110e8d01-0319-4d1e-a829-52ad28d1bb01		2018-10-06 04:48:41 +00:00
..
Makefile	Update testhal makefile to avoid compîlation errors with chlib.h and chlicense files.	2018-03-15 08:03:58 +00:00
chconf.h	Mass update of configuration files.	2018-09-29 16:14:19 +00:00
halconf.h	Removed references to QSPI to most configuration files, more to do.	2018-10-06 04:48:41 +00:00
main.c	AVR: Add a testhal demo for XMEGA128U4A to test the SERIAL low level driver.	2018-02-12 20:18:58 +00:00
mcuconf.h	AVR: Add a testhal demo for XMEGA128U4A to test the SERIAL low level driver.	2018-02-12 20:18:58 +00:00
readme.txt	AVR: Add a testhal demo for XMEGA128U4A to test the SERIAL low level driver.	2018-02-12 20:18:58 +00:00

readme.txt

*****************************************************************************
** ChibiOS/RT port for ATxmega128a4u.                                      **
*****************************************************************************

** TARGET **

The demo runs on the mattair Tech MT-DB-X4 board.

** The Demo **

The demo demonstrate the use of the serial driver and print an Hello world
massage with a counter value so that the user can see that differents value
are printed to a connected console. To see the messages, you need to connect
an FTDI converter to USARTC0 (PINC3 is MCU TX and PINC2 is MCU RX).

** Build Procedure **

The demo was built using the GCC AVR toolchain. It should build with WinAVR too!

** Programming procedure **

The board can be flash by using the Makefile and the DFU Programmer tools.
See the make file for more details.