ChibiOS

History

Giovanni Di Sirio 5928999fd5 Mass update of configuration files with QSPI settings. git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@9486 35acf78f-673a-0410-8e92-d51de3d6d3f4		2016-05-15 09:18:27 +00:00
..
Makefile	Makefiles mass update.	2016-04-23 06:03:22 +00:00
chconf.h	[AVR] Zeroed time quantum	2016-04-16 03:19:53 +00:00
halconf.h	Mass update of configuration files with QSPI settings.	2016-05-15 09:18:27 +00:00
main.c	[AVR] Fixed WA declaration	2016-04-16 03:17:10 +00:00
mcuconf.h	git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@9153 35acf78f-673a-0410-8e92-d51de3d6d3f4	2016-03-23 18:43:19 +00:00
readme.txt	Initial RT-3.0 Arduino Mega port	2014-06-29 23:15:11 +00:00

readme.txt

*****************************************************************************
** ChibiOS/RT port for Atmel AVR ATmega1280.                                **
*****************************************************************************

** TARGET **

The demo runs on an Arduino Mega board.

** The Demo **

The demo currently just prints the TestThread output on Serial0, which is
available on the board USB connector (FT232 converter), and toggles the LED
on PB7 (pin 13 on Arduino IDE) every second.

** Build Procedure **

The demo was built using the GCC AVR toolchain. It should build with WinAVR too!

** Notes **

This demo runs natively so the Arduino bootloader must be removed and the FUSEs
reprogrammed. The values used for fuses are LFUSE=0xe7 and HFUSE=0x99.