ChibiOS/demos/STM32/RT-STM32F767ZI-NUCLEO144
Giovanni Di Sirio e82a29e7c6 Files mcuconf.h for STM32F746, F767, L432, L452, L476, L496 received the missing setting STM32_WSPI_QUADSPI1_PRESCALER_VALUE.
git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@14286 27425a3e-05d8-49a3-a47f-9c15f0e5edd8
2021-04-24 07:46:58 +00:00
..
cfg Files mcuconf.h for STM32F746, F767, L432, L452, L476, L496 received the missing setting STM32_WSPI_QUADSPI1_PRESCALER_VALUE. 2021-04-24 07:46:58 +00:00
.cproject Initial support for STM32F767 2016-06-23 22:29:51 +00:00
.project Initial support for STM32F767 2016-06-23 22:29:51 +00:00
Makefile Makefile mass update, all paths changed to new ARMv7-M port. 2020-07-12 16:37:17 +00:00
main.c Mass update of the Apache 2.0 license statement. 2018-01-20 11:44:14 +00:00
readme.txt Fixed wrong readme in RT-STM32F767ZI-NUCLEO144 demo 2016-06-24 13:55:12 +00:00

readme.txt

*****************************************************************************
** ChibiOS/RT port for ARM-Cortex-M7 STM32F767.                            **
*****************************************************************************

** TARGET **

The demo runs on an STM32 Nucleo144-F767ZI board.

** The Demo **

The demo flashes the board LEDs using a thread, by pressing the button located
on the board the test procedure is activated with output on the serial port
SD3 (USART3, mapped on STLink v2-1 Virtual COM Port).

** Build Procedure **

The demo has been tested by using the free Codesourcery GCC-based toolchain
and YAGARTO. just modify the TRGT line in the makefile in order to use
different GCC toolchains.

** Notes **

Some files used by the demo are not part of ChibiOS/RT but are copyright of
ST Microelectronics and are licensed under a different license.
Also note that not all the files present in the ST library are distributed
with ChibiOS/RT, you can find the whole library on the ST web site:

                             http://www.st.com