ChibiOS

History

Theodore Ateba 2eb2654b94 AVR: Add a demo for ChibiOS/NIL test suite purpose. git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@11176 35acf78f-673a-0410-8e92-d51de3d6d3f4		2017-12-23 15:27:00 +00:00
..
:	AVR: Add a demo for ChibiOS/NIL test suite purpose.	2017-12-23 15:27:00 +00:00
Makefile	AVR: Add a demo for ChibiOS/NIL test suite purpose.	2017-12-23 15:27:00 +00:00
chconf.h	AVR: Add a demo for ChibiOS/NIL test suite purpose.	2017-12-23 15:27:00 +00:00
halconf.h	AVR: Add a demo for ChibiOS/NIL test suite purpose.	2017-12-23 15:27:00 +00:00
main.c	AVR: Add a demo for ChibiOS/NIL test suite purpose.	2017-12-23 15:27:00 +00:00
mcuconf.h	AVR: Add a demo for ChibiOS/NIL test suite purpose.	2017-12-23 15:27:00 +00:00
readme.txt	AVR: Add a demo for ChibiOS/NIL test suite purpose.	2017-12-23 15:27:00 +00:00

readme.txt

*****************************************************************************
** ChibiOS/NIL port for Atmel AVR ATmega2560.                              **
*****************************************************************************

** TARGET **

The demo runs on an Arduino Mega board.

** The Demo **

One thread prints a message to the serial console, which is available on
the board USB connector (FT232 converter).

Another thread toggles the LED on PB7 (pin 13 on Arduino IDE) every 500ms.

** Build Procedure **

The demo was built using the GCC AVR toolchain. It should build with WinAVR too!

** Notes **

This demo runs natively so the Arduino bootloader must be removed and the FUSEs
reprogrammed. The values used for fuses are LFUSE=0xe7 and HFUSE=0x99.