ChibiOS/os/hal/platforms/STM32F1xx/stm32_dma.h

408 lines
16 KiB
C

/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
2011,2012 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/**
* @file STM32F1xx/stm32_dma.h
* @brief DMA helper driver header.
* @note This file requires definitions from the ST header file stm32f10x.h.
* @note This driver uses the new naming convention used for the STM32F2xx
* so the "DMA channels" are referred as "DMA streams".
*
* @addtogroup STM32F1xx_DMA
* @{
*/
#ifndef _STM32_DMA_H_
#define _STM32_DMA_H_
/*===========================================================================*/
/* Driver constants. */
/*===========================================================================*/
/**
* @brief Total number of DMA streams.
* @note This is the total number of streams among all the DMA units.
*/
#if STM32_HAS_DMA2 || defined(__DOXYGEN__)
#define STM32_DMA_STREAMS 12
#else
#define STM32_DMA_STREAMS 7
#endif
/**
* @brief Mask of the ISR bits passed to the DMA callback functions.
*/
#define STM32_DMA_ISR_MASK 0x0F
/**
* @brief Returns the channel associated to the specified stream.
*
* @param[in] n the stream number (0...STM32_DMA_STREAMS-1)
* @param[in] c a stream/channel association word, one channel per
* nibble, not associated channels must be set to 0xF
* @return Always zero, in this platform there is no dynamic
* association between streams and channels.
*/
#define STM32_DMA_GETCHANNEL(n, c) 0
/**
* @brief Checks if a DMA priority is within the valid range.
* @param[in] prio DMA priority
*
* @retval The check result.
* @retval FALSE invalid DMA priority.
* @retval TRUE correct DMA priority.
*/
#define STM32_DMA_IS_VALID_PRIORITY(prio) (((prio) >= 0) && ((prio) <= 3))
/**
* @brief Returns an unique numeric identifier for a DMA stream.
*
* @param[in] dma the DMA unit number
* @param[in] stream the stream number
* @return An unique numeric stream identifier.
*/
#define STM32_DMA_STREAM_ID(dma, stream) ((((dma) - 1) * 7) + ((stream) - 1))
/**
* @brief Returns a DMA stream identifier mask.
*
*
* @param[in] dma the DMA unit number
* @param[in] stream the stream number
* @return A DMA stream identifier mask.
*/
#define STM32_DMA_STREAM_ID_MSK(dma, stream) \
(1 << STM32_DMA_STREAM_ID(dma, stream))
/**
* @brief Checks if a DMA stream unique identifier belongs to a mask.
* @param[in] id the stream numeric identifier
* @param[in] mask the stream numeric identifiers mask
*
* @retval The check result.
* @retval FALSE id does not belong to the mask.
* @retval TRUE id belongs to the mask.
*/
#define STM32_DMA_IS_VALID_ID(id, mask) (((1 << (id)) & (mask)))
/**
* @name DMA streams identifiers
* @{
*/
/**
* @brief Returns a pointer to a stm32_dma_stream_t structure.
*
* @param[in] id the stream numeric identifier
* @return A pointer to the stm32_dma_stream_t constant structure
* associated to the DMA stream.
*/
#define STM32_DMA_STREAM(id) (&_stm32_dma_streams[id])
#define STM32_DMA1_STREAM1 STM32_DMA_STREAM(0)
#define STM32_DMA1_STREAM2 STM32_DMA_STREAM(1)
#define STM32_DMA1_STREAM3 STM32_DMA_STREAM(2)
#define STM32_DMA1_STREAM4 STM32_DMA_STREAM(3)
#define STM32_DMA1_STREAM5 STM32_DMA_STREAM(4)
#define STM32_DMA1_STREAM6 STM32_DMA_STREAM(5)
#define STM32_DMA1_STREAM7 STM32_DMA_STREAM(6)
#define STM32_DMA2_STREAM1 STM32_DMA_STREAM(7)
#define STM32_DMA2_STREAM2 STM32_DMA_STREAM(8)
#define STM32_DMA2_STREAM3 STM32_DMA_STREAM(9)
#define STM32_DMA2_STREAM4 STM32_DMA_STREAM(10)
#define STM32_DMA2_STREAM5 STM32_DMA_STREAM(11)
/** @} */
/**
* @name CR register constants common to all DMA types
* @{
*/
#define STM32_DMA_CR_EN DMA_CCR1_EN
#define STM32_DMA_CR_TEIE DMA_CCR1_TEIE
#define STM32_DMA_CR_HTIE DMA_CCR1_HTIE
#define STM32_DMA_CR_TCIE DMA_CCR1_TCIE
#define STM32_DMA_CR_DIR_MASK (DMA_CCR1_DIR | DMA_CCR1_MEM2MEM)
#define STM32_DMA_CR_DIR_P2M 0
#define STM32_DMA_CR_DIR_M2P DMA_CCR1_DIR
#define STM32_DMA_CR_DIR_M2M DMA_CCR1_MEM2MEM
#define STM32_DMA_CR_CIRC DMA_CCR1_CIRC
#define STM32_DMA_CR_PINC DMA_CCR1_PINC
#define STM32_DMA_CR_MINC DMA_CCR1_MINC
#define STM32_DMA_CR_PSIZE_MASK DMA_CCR1_PSIZE
#define STM32_DMA_CR_PSIZE_BYTE 0
#define STM32_DMA_CR_PSIZE_HWORD DMA_CCR1_PSIZE_0
#define STM32_DMA_CR_PSIZE_WORD DMA_CCR1_PSIZE_1
#define STM32_DMA_CR_MSIZE_MASK DMA_CCR1_MSIZE
#define STM32_DMA_CR_MSIZE_BYTE 0
#define STM32_DMA_CR_MSIZE_HWORD DMA_CCR1_MSIZE_0
#define STM32_DMA_CR_MSIZE_WORD DMA_CCR1_MSIZE_1
#define STM32_DMA_CR_SIZE_MASK (STM32_DMA_CR_MSIZE_MASK | \
STM32_DMA_CR_MSIZE_MASK)
#define STM32_DMA_CR_PL_MASK DMA_CCR1_PL
#define STM32_DMA_CR_PL(n) ((n) << 12)
/** @} */
/**
* @name CR register constants only found in enhanced DMA
* @{
*/
#define STM32_DMA_CR_DMEIE 0 /**< @brief Ignored by normal DMA. */
#define STM32_DMA_CR_CHSEL_MASK 0 /**< @brief Ignored by normal DMA. */
#define STM32_DMA_CR_CHSEL(n) 0 /**< @brief Ignored by normal DMA. */
/** @} */
/**
* @name Status flags passed to the ISR callbacks
* @{
*/
#define STM32_DMA_ISR_FEIF 0
#define STM32_DMA_ISR_DMEIF 0
#define STM32_DMA_ISR_TEIF DMA_ISR_TEIF1
#define STM32_DMA_ISR_HTIF DMA_ISR_HTIF1
#define STM32_DMA_ISR_TCIF DMA_ISR_TCIF1
/** @} */
/*===========================================================================*/
/* Driver pre-compile time settings. */
/*===========================================================================*/
/*===========================================================================*/
/* Derived constants and error checks. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver data structures and types. */
/*===========================================================================*/
/**
* @brief STM32 DMA stream descriptor structure.
*/
typedef struct {
DMA_Channel_TypeDef *channel; /**< @brief Associated DMA channel. */
volatile uint32_t *ifcr; /**< @brief Associated IFCR reg. */
uint8_t ishift; /**< @brief Bits offset in xIFCR
register. */
uint8_t selfindex; /**< @brief Index to self in array. */
uint8_t vector; /**< @brief Associated IRQ vector. */
} stm32_dma_stream_t;
/**
* @brief STM32 DMA ISR function type.
*
* @param[in] p parameter for the registered function
* @param[in] flags pre-shifted content of the ISR register, the bits
* are aligned to bit zero
*/
typedef void (*stm32_dmaisr_t)(void *p, uint32_t flags);
/*===========================================================================*/
/* Driver macros. */
/*===========================================================================*/
/**
* @name Macro Functions
* @{
*/
/**
* @brief Associates a peripheral data register to a DMA stream.
* @note This function can be invoked in both ISR or thread context.
* @pre The stream must have been allocated using @p dmaStreamAllocate().
* @post After use the stream can be released using @p dmaStreamRelease().
*
* @param[in] dmastp pointer to a stm32_dma_stream_t structure
* @param[in] addr value to be written in the CPAR register
*
* @special
*/
#define dmaStreamSetPeripheral(dmastp, addr) { \
(dmastp)->channel->CPAR = (uint32_t)(addr); \
}
/**
* @brief Associates a memory destination to a DMA stream.
* @note This function can be invoked in both ISR or thread context.
* @pre The stream must have been allocated using @p dmaStreamAllocate().
* @post After use the stream can be released using @p dmaStreamRelease().
*
* @param[in] dmastp pointer to a stm32_dma_stream_t structure
* @param[in] addr value to be written in the CMAR register
*
* @special
*/
#define dmaStreamSetMemory0(dmastp, addr) { \
(dmastp)->channel->CMAR = (uint32_t)(addr); \
}
/**
* @brief Sets the number of transfers to be performed.
* @note This function can be invoked in both ISR or thread context.
* @pre The stream must have been allocated using @p dmaStreamAllocate().
* @post After use the stream can be released using @p dmaStreamRelease().
*
* @param[in] dmastp pointer to a stm32_dma_stream_t structure
* @param[in] size value to be written in the CNDTR register
*
* @special
*/
#define dmaStreamSetTransactionSize(dmastp, size) { \
(dmastp)->channel->CNDTR = (uint32_t)(size); \
}
/**
* @brief Returns the number of transfers to be performed.
* @note This function can be invoked in both ISR or thread context.
* @pre The stream must have been allocated using @p dmaStreamAllocate().
* @post After use the stream can be released using @p dmaStreamRelease().
*
* @param[in] dmastp pointer to a stm32_dma_stream_t structure
* @return The number of transfers to be performed.
*
* @special
*/
#define dmaStreamGetTransactionSize(dmastp) ((size_t)((dmastp)->channel->CNDTR))
/**
* @brief Programs the stream mode settings.
* @note This function can be invoked in both ISR or thread context.
* @pre The stream must have been allocated using @p dmaStreamAllocate().
* @post After use the stream can be released using @p dmaStreamRelease().
*
* @param[in] dmastp pointer to a stm32_dma_stream_t structure
* @param[in] mode value to be written in the CCR register
*
* @special
*/
#define dmaStreamSetMode(dmastp, mode) { \
(dmastp)->channel->CCR = (uint32_t)(mode); \
}
/**
* @brief DMA stream enable.
* @note This function can be invoked in both ISR or thread context.
* @pre The stream must have been allocated using @p dmaStreamAllocate().
* @post After use the stream can be released using @p dmaStreamRelease().
*
* @param[in] dmastp pointer to a stm32_dma_stream_t structure
*
* @special
*/
#define dmaStreamEnable(dmastp) { \
(dmastp)->channel->CCR |= STM32_DMA_CR_EN; \
}
/**
* @brief DMA stream disable.
* @details The function disables the specified stream and then clears any
* pending interrupt.
* @note This function can be invoked in both ISR or thread context.
* @pre The stream must have been allocated using @p dmaStreamAllocate().
* @post After use the stream can be released using @p dmaStreamRelease().
*
* @param[in] dmastp pointer to a stm32_dma_stream_t structure
*
* @special
*/
#define dmaStreamDisable(dmastp) { \
(dmastp)->channel->CCR &= ~STM32_DMA_CR_EN; \
dmaStreamClearInterrupt(dmastp); \
}
/**
* @brief DMA stream interrupt sources clear.
* @note This function can be invoked in both ISR or thread context.
* @pre The stream must have been allocated using @p dmaStreamAllocate().
* @post After use the stream can be released using @p dmaStreamRelease().
*
* @param[in] dmastp pointer to a stm32_dma_stream_t structure
*
* @special
*/
#define dmaStreamClearInterrupt(dmastp) { \
*(dmastp)->ifcr = STM32_DMA_ISR_MASK << (dmastp)->ishift; \
}
/**
* @brief Starts a memory to memory operation using the specified stream.
* @note The default transfer data mode is "byte to byte" but it can be
* changed by specifying extra options in the @p mode parameter.
* @pre The stream must have been allocated using @p dmaStreamAllocate().
* @post After use the stream can be released using @p dmaStreamRelease().
*
* @param[in] dmastp pointer to a stm32_dma_stream_t structure
* @param[in] mode value to be written in the CCR register, this value
* is implicitly ORed with:
* - @p STM32_DMA_CR_MINC
* - @p STM32_DMA_CR_PINC
* - @p STM32_DMA_CR_DIR_M2M
* - @p STM32_DMA_CR_EN
* .
* @param[in] src source address
* @param[in] dst destination address
* @param[in] n number of data units to copy
*/
#define dmaStartMemCopy(dmastp, mode, src, dst, n) { \
dmaStreamSetPeripheral(dmastp, src); \
dmaStreamSetMemory0(dmastp, dst); \
dmaStreamSetTransactionSize(dmastp, n); \
dmaStreamSetMode(dmastp, (mode) | \
STM32_DMA_CR_MINC | STM32_DMA_CR_PINC | \
STM32_DMA_CR_DIR_M2M | STM32_DMA_CR_EN); \
}
/**
* @brief Polled wait for DMA transfer end.
* @pre The stream must have been allocated using @p dmaStreamAllocate().
* @post After use the stream can be released using @p dmaStreamRelease().
*
* @param[in] dmastp pointer to a stm32_dma_stream_t structure
*/
#define dmaWaitCompletion(dmastp) { \
while ((dmastp)->channel->CNDTR > 0) \
; \
dmaStreamDisable(dmastp); \
}
/** @} */
/*===========================================================================*/
/* External declarations. */
/*===========================================================================*/
#if !defined(__DOXYGEN__)
extern const stm32_dma_stream_t _stm32_dma_streams[STM32_DMA_STREAMS];
#endif
#ifdef __cplusplus
extern "C" {
#endif
void dmaInit(void);
bool_t dmaStreamAllocate(const stm32_dma_stream_t *dmastp,
uint32_t priority,
stm32_dmaisr_t func,
void *param);
void dmaStreamRelease(const stm32_dma_stream_t *dmastp);
#ifdef __cplusplus
}
#endif
#endif /* _STM32_DMA_H_ */
/** @} */