ChibiOS/testhal/STM32/STM32F3xx/UART
Uladzimir Pylinski 0edf3f363b [STM32. USARTv2] Added receiver timeout handling.
git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@9713 35acf78f-673a-0410-8e92-d51de3d6d3f4
2016-07-19 18:56:03 +00:00
..
.cproject
.project
Makefile GCC asm files extension changed from .s to .S. 2016-04-23 06:47:26 +00:00
chconf.h Separate trace module, simplified tracer configuration. 2016-04-05 07:36:15 +00:00
halconf.h Mass update of configuration files with QSPI settings. 2016-05-15 09:18:27 +00:00
main.c [STM32. USARTv2] Added receiver timeout handling. 2016-07-19 18:56:03 +00:00
mcuconf.h git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@9153 35acf78f-673a-0410-8e92-d51de3d6d3f4 2016-03-23 18:43:19 +00:00
readme.txt Added watchdog driver model (WDG), to be completed and tested. 2015-12-03 13:49:06 +00:00

readme.txt

*****************************************************************************
** ChibiOS/HAL - UART driver demo for STM32F3xx.                           **
*****************************************************************************

** TARGET **

The demo runs on an STMicroelectronics STM32F3-Discovery board.

** The Demo **

The application demonstrates the use of the STM32F3xx UART driver.

** Board Setup **

- Connect an RS232 transceiver to pins PA9(TX) and PA10(RX).
- Connect a terminal emulator to the transceiver (38400-N-8-1).

** Build Procedure **

The demo has been tested using the free Codesourcery GCC-based toolchain
and YAGARTO.
Just modify the TRGT line in the makefile in order to use different GCC ports.

** Notes **

Some files used by the demo are not part of ChibiOS/RT but are copyright of
ST Microelectronics and are licensed under a different license.
Also note that not all the files present in the ST library are distributed
with ChibiOS/RT, you can find the whole library on the ST web site:

                             http://www.st.com