423 lines
13 KiB
C
423 lines
13 KiB
C
/*
|
|
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
|
|
2011,2012 Giovanni Di Sirio.
|
|
|
|
This file is part of ChibiOS/RT.
|
|
|
|
ChibiOS/RT is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
ChibiOS/RT is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/**
|
|
* @file STM32/OTGv1/usb_lld.h
|
|
* @brief STM32 USB subsystem low level driver header.
|
|
*
|
|
* @addtogroup USB
|
|
* @{
|
|
*/
|
|
|
|
#ifndef _USB_LLD_H_
|
|
#define _USB_LLD_H_
|
|
|
|
#if HAL_USE_USB || defined(__DOXYGEN__)
|
|
|
|
#include "stm32_otg.h"
|
|
|
|
/*===========================================================================*/
|
|
/* Driver constants. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* @brief Maximum endpoint address.
|
|
*/
|
|
#define USB_MAX_ENDPOINTS 3
|
|
|
|
/**
|
|
* @brief The address can be changed immediately upon packet reception.
|
|
*/
|
|
#define USB_SET_ADDRESS_MODE USB_EARLY_SET_ADDRESS
|
|
|
|
/*===========================================================================*/
|
|
/* Driver pre-compile time settings. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* @brief OTG1 driver enable switch.
|
|
* @details If set to @p TRUE the support for USB1 is included.
|
|
* @note The default is @p TRUE.
|
|
*/
|
|
#if !defined(STM32_USB_USE_OTG1) || defined(__DOXYGEN__)
|
|
#define STM32_USB_USE_OTG1 TRUE
|
|
#endif
|
|
|
|
/**
|
|
* @brief OTG1 interrupt priority level setting.
|
|
*/
|
|
#if !defined(STM32_USB_OTG1_IRQ_PRIORITY) || defined(__DOXYGEN__)
|
|
#define STM32_USB_OTG1_IRQ_PRIORITY 14
|
|
#endif
|
|
|
|
/**
|
|
* @brief OTG1 RX shared FIFO size.
|
|
* @note Must be a multiple of 4.
|
|
*/
|
|
#if !defined(STM32_USB_OTG1_RX_FIFO_SIZE) || defined(__DOXYGEN__)
|
|
#define STM32_USB_OTG1_RX_FIFO_SIZE 512
|
|
#endif
|
|
|
|
/*===========================================================================*/
|
|
/* Derived constants and error checks. */
|
|
/*===========================================================================*/
|
|
|
|
#if STM32_USB_USE_OTG1 && !STM32_HAS_OTG1
|
|
#error "OTG1 not present in the selected device"
|
|
#endif
|
|
|
|
#if !STM32_USB_USE_OTG1
|
|
#error "USB driver activated but no USB peripheral assigned"
|
|
#endif
|
|
|
|
#if (STM32_USB_OTG1_RX_FIFO_SIZE & 3) != 0
|
|
#error "RX FIFO size must be a multiple of 4"
|
|
#endif
|
|
|
|
#if defined(STM32F4XX) || defined(STM32F2XX)
|
|
#define STM32_USBCLK STM32_PLL48CLK
|
|
#elif defined(STM32F10X_CL)
|
|
#define STM32_USBCLK STM32_OTGFSCLK
|
|
#else
|
|
#error "unsupported STM32 platform for OTG functionality"
|
|
#endif
|
|
|
|
#if STM32_USBCLK != 48000000
|
|
#error "the USB OTG driver requires a 48MHz clock"
|
|
#endif
|
|
|
|
/*===========================================================================*/
|
|
/* Driver data structures and types. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* @brief Type of an IN endpoint state structure.
|
|
*/
|
|
typedef struct {
|
|
/**
|
|
* @brief Buffer mode, queue or linear.
|
|
*/
|
|
bool_t txqueued;
|
|
/**
|
|
* @brief Requested transmit transfer size.
|
|
*/
|
|
size_t txsize;
|
|
/**
|
|
* @brief Transmitted bytes so far.
|
|
*/
|
|
size_t txcnt;
|
|
union {
|
|
struct {
|
|
/**
|
|
* @brief Pointer to the transmission linear buffer.
|
|
*/
|
|
const uint8_t *txbuf;
|
|
} linear;
|
|
struct {
|
|
/**
|
|
* @brief Pointer to the output queue.
|
|
*/
|
|
OutputQueue *txqueue;
|
|
} queue;
|
|
} mode;
|
|
} USBInEndpointState;
|
|
|
|
/**
|
|
* @brief Type of an OUT endpoint state structure.
|
|
*/
|
|
typedef struct {
|
|
/**
|
|
* @brief Buffer mode, queue or linear.
|
|
*/
|
|
bool_t rxqueued;
|
|
/**
|
|
* @brief Requested receive transfer size.
|
|
*/
|
|
size_t rxsize;
|
|
/**
|
|
* @brief Received bytes so far.
|
|
*/
|
|
size_t rxcnt;
|
|
union {
|
|
struct {
|
|
/**
|
|
* @brief Pointer to the receive linear buffer.
|
|
*/
|
|
uint8_t *rxbuf;
|
|
} linear;
|
|
struct {
|
|
/**
|
|
* @brief Pointer to the input queue.
|
|
*/
|
|
InputQueue *rxqueue;
|
|
} queue;
|
|
} mode;
|
|
} USBOutEndpointState;
|
|
|
|
/**
|
|
* @brief Type of an USB endpoint configuration structure.
|
|
* @note Platform specific restrictions may apply to endpoints.
|
|
*/
|
|
typedef struct {
|
|
/**
|
|
* @brief Type and mode of the endpoint.
|
|
*/
|
|
uint32_t ep_mode;
|
|
/**
|
|
* @brief Setup packet notification callback.
|
|
* @details This callback is invoked when a setup packet has been
|
|
* received.
|
|
* @post The application must immediately call @p usbReadPacket() in
|
|
* order to access the received packet.
|
|
* @note This field is only valid for @p USB_EP_MODE_TYPE_CTRL
|
|
* endpoints, it should be set to @p NULL for other endpoint
|
|
* types.
|
|
*/
|
|
usbepcallback_t setup_cb;
|
|
/**
|
|
* @brief IN endpoint notification callback.
|
|
* @details This field must be set to @p NULL if the IN endpoint is not
|
|
* used.
|
|
*/
|
|
usbepcallback_t in_cb;
|
|
/**
|
|
* @brief OUT endpoint notification callback.
|
|
* @details This field must be set to @p NULL if the OUT endpoint is not
|
|
* used.
|
|
*/
|
|
usbepcallback_t out_cb;
|
|
/**
|
|
* @brief IN endpoint maximum packet size.
|
|
* @details This field must be set to zero if the IN endpoint is not
|
|
* used.
|
|
*/
|
|
uint16_t in_maxsize;
|
|
/**
|
|
* @brief OUT endpoint maximum packet size.
|
|
* @details This field must be set to zero if the OUT endpoint is not
|
|
* used.
|
|
*/
|
|
uint16_t out_maxsize;
|
|
/**
|
|
* @brief @p USBEndpointState associated to the IN endpoint.
|
|
* @details This structure maintains the state of the IN endpoint.
|
|
*/
|
|
USBInEndpointState *in_state;
|
|
/**
|
|
* @brief @p USBEndpointState associated to the OUT endpoint.
|
|
* @details This structure maintains the state of the OUT endpoint.
|
|
*/
|
|
USBOutEndpointState *out_state;
|
|
/* End of the mandatory fields.*/
|
|
/**
|
|
* @brief Pointer to a buffer for setup packets.
|
|
* @details Setup packets require a dedicated 8-bytes buffer, set this
|
|
* field to @p NULL for non-control endpoints.
|
|
*/
|
|
uint8_t *setup_buf;
|
|
} USBEndpointConfig;
|
|
|
|
/**
|
|
* @brief Type of an USB driver configuration structure.
|
|
*/
|
|
typedef struct {
|
|
/**
|
|
* @brief USB events callback.
|
|
* @details This callback is invoked when an USB driver event is registered.
|
|
*/
|
|
usbeventcb_t event_cb;
|
|
/**
|
|
* @brief Device GET_DESCRIPTOR request callback.
|
|
* @note This callback is mandatory and cannot be set to @p NULL.
|
|
*/
|
|
usbgetdescriptor_t get_descriptor_cb;
|
|
/**
|
|
* @brief Requests hook callback.
|
|
* @details This hook allows to be notified of standard requests or to
|
|
* handle non standard requests.
|
|
*/
|
|
usbreqhandler_t requests_hook_cb;
|
|
/**
|
|
* @brief Start Of Frame callback.
|
|
*/
|
|
usbcallback_t sof_cb;
|
|
/* End of the mandatory fields.*/
|
|
} USBConfig;
|
|
|
|
/**
|
|
* @brief Structure representing an USB driver.
|
|
*/
|
|
struct USBDriver {
|
|
/**
|
|
* @brief Driver state.
|
|
*/
|
|
usbstate_t state;
|
|
/**
|
|
* @brief Current configuration data.
|
|
*/
|
|
const USBConfig *config;
|
|
/**
|
|
* @brief Field available to user, it can be used to associate an
|
|
* application-defined handler to the USB driver.
|
|
*/
|
|
void *param;
|
|
/**
|
|
* @brief Bit map of the transmitting IN endpoints.
|
|
*/
|
|
uint16_t transmitting;
|
|
/**
|
|
* @brief Bit map of the receiving OUT endpoints.
|
|
*/
|
|
uint16_t receiving;
|
|
/**
|
|
* @brief Active endpoints configurations.
|
|
*/
|
|
const USBEndpointConfig *epc[USB_MAX_ENDPOINTS + 1];
|
|
/**
|
|
* @brief Endpoint 0 state.
|
|
*/
|
|
usbep0state_t ep0state;
|
|
/**
|
|
* @brief Next position in the buffer to be transferred through endpoint 0.
|
|
*/
|
|
uint8_t *ep0next;
|
|
/**
|
|
* @brief Number of bytes yet to be transferred through endpoint 0.
|
|
*/
|
|
size_t ep0n;
|
|
/**
|
|
* @brief Endpoint 0 end transaction callback.
|
|
*/
|
|
usbcallback_t ep0endcb;
|
|
/**
|
|
* @brief Setup packet buffer.
|
|
*/
|
|
uint8_t setup[8];
|
|
/**
|
|
* @brief Current USB device status.
|
|
*/
|
|
uint16_t status;
|
|
/**
|
|
* @brief Assigned USB address.
|
|
*/
|
|
uint8_t address;
|
|
/**
|
|
* @brief Current USB device configuration.
|
|
*/
|
|
uint8_t configuration;
|
|
#if defined(USB_DRIVER_EXT_FIELDS)
|
|
USB_DRIVER_EXT_FIELDS
|
|
#endif
|
|
/* End of the mandatory fields.*/
|
|
/**
|
|
* @brief Pointer to the next address in the packet memory.
|
|
*/
|
|
uint32_t pmnext;
|
|
};
|
|
|
|
/*===========================================================================*/
|
|
/* Driver macros. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* @brief Fetches a 16 bits word value from an USB message.
|
|
*
|
|
* @param[in] p pointer to the 16 bits word
|
|
*
|
|
* @notapi
|
|
*/
|
|
#define usb_lld_fetch_word(p) (*(uint16_t *)(p))
|
|
|
|
/**
|
|
* @brief Returns the exact size of a receive transaction.
|
|
* @details The received size can be different from the size specified in
|
|
* @p usbStartReceiveI() because the last packet could have a size
|
|
* different from the expected one.
|
|
* @pre The OUT endpoint must have been configured in transaction mode
|
|
* in order to use this function.
|
|
*
|
|
* @param[in] usbp pointer to the @p USBDriver object
|
|
* @param[in] ep endpoint number
|
|
* @return Received data size.
|
|
*
|
|
* @notapi
|
|
*/
|
|
#define usb_lld_get_transaction_size(usbp, ep) \
|
|
((usbp)->epc[ep]->out_state->rxcnt)
|
|
|
|
/**
|
|
* @brief Connects the USB device.
|
|
*
|
|
* @api
|
|
*/
|
|
#define usb_lld_connect_bus(usbp) (OTG->GCCFG |= GCCFG_VBUSBSEN)
|
|
|
|
/**
|
|
* @brief Disconnect the USB device.
|
|
*
|
|
* @api
|
|
*/
|
|
#define usb_lld_disconnect_bus(usbp) (OTG->GCCFG &= ~GCCFG_VBUSBSEN)
|
|
|
|
/*===========================================================================*/
|
|
/* External declarations. */
|
|
/*===========================================================================*/
|
|
|
|
#if STM32_USB_USE_OTG1 && !defined(__DOXYGEN__)
|
|
extern USBDriver USBD1;
|
|
#endif
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
void usb_lld_init(void);
|
|
void usb_lld_start(USBDriver *usbp);
|
|
void usb_lld_stop(USBDriver *usbp);
|
|
void usb_lld_reset(USBDriver *usbp);
|
|
void usb_lld_set_address(USBDriver *usbp);
|
|
void usb_lld_init_endpoint(USBDriver *usbp, usbep_t ep);
|
|
void usb_lld_disable_endpoints(USBDriver *usbp);
|
|
usbepstatus_t usb_lld_get_status_in(USBDriver *usbp, usbep_t ep);
|
|
usbepstatus_t usb_lld_get_status_out(USBDriver *usbp, usbep_t ep);
|
|
void usb_lld_read_setup(USBDriver *usbp, usbep_t ep, uint8_t *buf);
|
|
void usb_lld_prepare_receive(USBDriver *usbp, usbep_t ep,
|
|
uint8_t *buf, size_t n);
|
|
void usb_lld_prepare_transmit(USBDriver *usbp, usbep_t ep,
|
|
const uint8_t *buf, size_t n);
|
|
void usb_lld_prepare_queued_receive(USBDriver *usbp, usbep_t ep,
|
|
InputQueue *iq, size_t n);
|
|
void usb_lld_prepare_queued_transmit(USBDriver *usbp, usbep_t ep,
|
|
OutputQueue *oq, size_t n);
|
|
void usb_lld_start_out(USBDriver *usbp, usbep_t ep);
|
|
void usb_lld_start_in(USBDriver *usbp, usbep_t ep);
|
|
void usb_lld_stall_out(USBDriver *usbp, usbep_t ep);
|
|
void usb_lld_stall_in(USBDriver *usbp, usbep_t ep);
|
|
void usb_lld_clear_out(USBDriver *usbp, usbep_t ep);
|
|
void usb_lld_clear_in(USBDriver *usbp, usbep_t ep);
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* HAL_USE_USB */
|
|
|
|
#endif /* _USB_LLD_H_ */
|
|
|
|
/** @} */
|