ChibiOS/testex/STM32/STM32F7xx/SPI-ADXL355
Giovanni Di Sirio f84032701c Mass EOL change to Unix mode.
git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@15872 27425a3e-05d8-49a3-a47f-9c15f0e5edd8
2022-12-11 14:52:30 +00:00
..
cfg Mass EOL change to Unix mode. 2022-12-11 14:52:30 +00:00
.cproject Mass EOL change to Unix mode. 2022-12-11 14:52:30 +00:00
.project Mass EOL change to Unix mode. 2022-12-11 14:52:30 +00:00
Makefile Mass EOL change to Unix mode. 2022-12-11 14:52:30 +00:00
main.c Mass change: Source code convention changed from CRLF to just CR (Unix). 2022-08-29 15:54:32 +00:00
readme.txt Mass EOL change to Unix mode. 2022-12-11 14:52:30 +00:00

readme.txt

*****************************************************************************
** ChibiOS/HAL + ChibiOS/EX - SPI + ADXL355 demo for STM32F7xx.            **
*****************************************************************************

** TARGET **

The demo runs on an STM32 Discovery-F7. It has been tested 
connecting an external the EVAL-ADXL355.

** The Demo **

The application demonstrates the use of the STM32F7xx SPI driver in order
to acquire data from ADXL355 using ChibiOS/EX.

** Board Setup **

With reference to the ADI UG-1030 (EVAL-ADXL354/EVAL-ADXL355 User Guide) and
to the ST UM1907 (STM32 Discovery-F746G User Manual) the following connection
are need:
 ---------------------------------------------
|     EVAL-ADXL355     |    STM32 Discovery   |
|---------------------------------------------|
|                      |                      |
|         P1.1         |      ARD_IOREF       |
|         P1.3         |       ARD_3V3        |
|         P1.5         |       ARD_GND        |
|                      |                      |
|         P2.2         |       ARD_D9         |
|         P2.4         |       ARD_D13        |
|         P2.5         |       ARD_D11        |
|         P2.6         |       ARD_D12        |
 ---------------------------------------------
** Build Procedure **

The demo has been tested using the free Codesourcery GCC-based toolchain
and YAGARTO.
Just modify the TRGT line in the makefile in order to use different GCC ports.

** Notes **

Some files used by the demo are not part of ChibiOS/RT but are copyright of
ST Microelectronics and are licensed under a different license.
Also note that not all the files present in the ST library are distributed
with ChibiOS/RT, you can find the whole library on the ST web site:

                             http://www.st.com