29 lines
1.2 KiB
Plaintext
29 lines
1.2 KiB
Plaintext
You must identify the modifications in this text file.
|
|
These modifications are licensed under the TAPR Open Hardware License.
|
|
|
|
-----BEGINING OF THE MODIFICATIONS-----
|
|
|
|
-2018/01/30 - andreika
|
|
Revision 0.020
|
|
+ resistor R13 (near CJ125) connected to pin 22 of U2, not to the ground
|
|
+ transistor Q1 (oxygen sensor heater) changed from VND5 to VND14
|
|
+ resistor R3 (heater MOSFET gate) reduced to 220 Ohm
|
|
+ removed resistor R5 (changed to jumper wire) and capacitor C6
|
|
+ more wide traces for Wideband O2S heater power supply (near P2 connector)
|
|
+ power lines V12 and WV12 (WideBand) now separated
|
|
+ removed erroneous connection of CKPS2+ and R152 to the ground
|
|
+ increased clearance between capacitors C42 and C43
|
|
+ more wide power supply traces for MAX9926
|
|
+ added +5V TVS-diode for supply of MAX9926 (D30)
|
|
+ increased clearances for internal ign.coil ground planes, ign_gnd output moved away
|
|
+ removed connection traces of ign.ground and power ground inside PCB
|
|
+ additional pull-up resistor added for tachometer transistor to +5V (R165)
|
|
|
|
|
|
-2017/04/07 - andreika
|
|
First Revision 0.010
|
|
|
|
-
|
|
|
|
|
|
-----END OF THE MODIFICATIONS----- |