2017-12-24 06:30:30 -08:00
|
|
|
1) resolved in 0.11 hi-side driver: the part number is for SOIC package but the board has MSOP package. Part number should be TC4427AEUA
|
|
|
|
|
2) todo: add full 25x2 silkscreen on the back
|
|
|
|
|
3) todo: hi-side net names are weird: control line indeces do not match output line indeces
|
|
|
|
|
4) TODO: 5v power pin with a jumper - that's for a HD44780 so that power could be turned on/off
|
|
|
|
|
5) diode part number is not exactly right: 497-2521-1-ND is a single diode, VCC side stays unprotected
|
|
|
|
|
6) rename 'inj-X' to 'low-X' to reduce confusion?
|
|
|
|
|
7) draw VBatt wiring on the back of the board?
|
|
|
|
|
8) VP label silkscreen should be improved
|
|
|
|
|
9) resolved in 0.1.1 "5v 5v GND" silkscreen on the back is wrong - one of the pins is 3v. todo: check power silkscreen on the front
|
2015-07-10 06:01:56 -07:00
|
|
|
|
2017-12-24 06:30:30 -08:00
|
|
|
10) a jumper to connect VP to +5
|
|
|
|
|
11) a jumper to connect W211 to PC6
|
|
|
|
|
12) a jumper to connect W212 to PA5
|
|
|
|
|
|
|
|
|
|
13) Knock should use 100k and 3.3nF caps. See changes found in Frankenso R0.5
|
