rusefi/firmware/config/boards/hellen/hellen121vag/board.mk

# Combine the related files for a specific platform and MCU.

# Target ECU board design
BOARDCPPSRC = $(BOARDS_DIR)/hellen/hellen121vag/board_configuration.cpp
BOARDINC = $(BOARDS_DIR)/hellen/hellen121vag

# Set this if you want a default engine type other than normal hellen121vag
ifeq ($(DEFAULT_ENGINE_TYPE),)
  DEFAULT_ENGINE_TYPE = -DDEFAULT_ENGINE_TYPE=HELLEN_121_VAG_4_CYL
endif

# 176 package MCU
ifeq ($(LED_CRITICAL_ERROR_BRAIN_PIN),)
  LED_CRITICAL_ERROR_BRAIN_PIN = -DLED_CRITICAL_ERROR_BRAIN_PIN=GPIOH_8
endif

DDEFS += -DEFI_MAIN_RELAY_CONTROL=TRUE

DDEFS += -DLED_ERROR_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_RUNING_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_WARNING_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_COMMUNICATION_BRAIN_PIN_MODE=INVERTED_OUTPUT

# Disable serial ports on this board as UART3 causes a DMA conflict with the SD card
DDEFS += -DTS_NO_PRIMARY=1 -DTS_NO_SECONDARY=1

# Add them all together
DDEFS += -DEFI_USE_OSC=TRUE -DFIRMWARE_ID=\"hellen121vag\" $(DEFAULT_ENGINE_TYPE) $(LED_CRITICAL_ERROR_BRAIN_PIN) $(LED_COMMUNICATION_BRAIN_PIN)
DDEFS += -DEFI_SOFTWARE_KNOCK=TRUE -DSTM32_ADC_USE_ADC3=TRUE
DDEFS += -DEFI_ICU_INPUTS=FALSE -DHAL_TRIGGER_USE_PAL=TRUE
# todo: is it broken?
DDEFS += -DEFI_LOGIC_ANALYZER=FALSE

# We are running on Hellen-One hardware!
DDEFS += -DHW_HELLEN=1