rusefi/.github/workflows/build-firmware.yaml

name: Firmware at GHA

on:
  push:
  pull_request:
  workflow_dispatch:
    inputs:
      lts:
        description: 'LTS Build'
        required: false
        type: boolean
jobs:
  build-firmware:
    runs-on: ubuntu-latest

    strategy:
      # Let all builds finish even if one fails early
      fail-fast: false
      matrix:
        # What boards should we build for? In the 'include' section below,
        # set up what each of these boards needs to build.
        #
        # see also gen_config where we have a similar list for all boards!
        # see also build-primary-bundle where default/primary bundle is build separately
        #
        build-target: [
            alphax-2chan,
            alphax-4chan,
            alphax-8chan,
            m74_9,
            s105,
            harley81,
            hellen72,
            hellen81,
            hellen88bmw,
            hellen88bmw_avr,
            hellen-nb1,
            hellen-gm-e67,
            hellenNA8_96,
            hellenNA6,
            hellen128,
            hellen121vag,
            hellen-honda-k,
            hellen121nissan,
            cypress,
            frankenso_na6,
            kinetis,
            mre_f4,
            mre_f4_no_openblt,
            mre_f4_debug,
            mre_f4_recovery,
            mre_f4_hardware_QC_special_build,
            mre_f7,
            prometheus_405,
            prometheus_469,
            proteus_f4,
            proteus_f4_hardware_QC_special_build,
            proteus_f7,
            proteus_f7_hardware_QC_special_build,
            proteus_h7,
            proteus_legacy,
            stm32f429_nucleo,
            stm32f767_nucleo,
            stm32h743_nucleo,
            subaru_eg33_f7,
            f407-discovery,
            f429-discovery,
            core8,
            48way,
            atlas,
            tdg-pdm8,
        ]

        include:
          # Board configurations
          - build-target: hellen72
            folder: config/boards/hellen/hellen72
            ini-file: rusefi_hellen72.ini
            skip-rate: 90

          - build-target: hellen81
            folder: config/boards/hellen/hellen81
            ini-file: rusefi_hellen81.ini
            skip-rate: 90

          - build-target: alphax-2chan
            folder: config/boards/hellen/alphax-2chan
            ini-file: rusefi_alphax-2chan.ini
            skip-rate: 0

          - build-target: alphax-4chan
            folder: config/boards/hellen/alphax-4chan
            ini-file: rusefi_alphax-4chan.ini

          - build-target: alphax-8chan
            folder: config/boards/hellen/alphax-8chan
            ini-file: rusefi_alphax-8chan.ini

          - build-target: s105
            folder: config/boards/s105
            ini-file: rusefi_s105.ini
            skip-rate: 90

          - build-target: m74_9
            folder: config/boards/m74_9
            ini-file: rusefi_m74_9.ini
            skip-rate: 0

          - build-target: harley81
            folder: config/boards/hellen/harley81
            ini-file: rusefi_harley81.ini
            skip-rate: 90

          - build-target: hellen88bmw
            folder: config/boards/hellen/hellen88bmw
            ini-file: rusefi_hellen88bmw.ini
            skip-rate: 90

          - build-target: hellen88bmw_avr
            folder: config/boards/hellen/hellen88bmw
            ini-file: rusefi_hellen88bmw.ini
            skip-rate: 90

          - build-target: hellen-nb1
            folder: config/boards/hellen/hellen-nb1
            ini-file: rusefi_hellen-nb1.ini
            skip-rate: 90

          - build-target: hellen-gm-e67
            folder: config/boards/hellen/hellen-gm-e67
            ini-file: rusefi_hellen-gm-e67.ini
            skip-rate: 90

          - build-target: hellenNA8_96
            folder: config/boards/hellen/hellenNA8_96
            ini-file: rusefi_hellenNA8_96.ini
            skip-rate: 90

          - build-target: hellenNA6
            folder: config/boards/hellen/hellen64_miataNA6_94
            ini-file: rusefi_hellenNA6.ini
            skip-rate: 90

          - build-target: hellen128
            folder: config/boards/hellen/hellen128
            ini-file: rusefi_hellen128mercedes.ini
            skip-rate: 50

          - build-target: hellen121vag
            folder: config/boards/hellen/hellen121vag
            ini-file: rusefi_hellen121vag.ini
            skip-rate: 90

          - build-target: hellen121nissan
            folder: config/boards/hellen/hellen121nissan
            ini-file: rusefi_hellen121nissan.ini

          - build-target: hellen-honda-k
            folder: config/boards/hellen/hellen-honda-k
            ini-file: rusefi_hellen-honda-k.ini

          - build-target: hellen154hyundai
            folder: config/boards/hellen/hellen154hyundai
            ini-file: rusefi_hellen154hyundai.ini
            skip-rate: 90

          - build-target: cypress
            folder: config/boards/cypress
            ini-file: rusefi_cypress.ini

          - build-target: frankenso_na6
            folder: config/boards/frankenso
            ini-file: rusefi_frankenso_na6.ini
            skip-rate: 90

          - build-target: kinetis
            folder: config/boards/kinetis
            ini-file: rusefi_kin.ini
            skip-rate: 0

          - build-target: mre_f4
            folder: config/boards/microrusefi
            ini-file: rusefi_mre_f4.ini

          - build-target: mre_f4_no_openblt
            folder: config/boards/microrusefi
            ini-file: rusefi_mre_f4.ini

          - build-target: mre_f4_debug
            folder: config/boards/microrusefi
            ini-file: rusefi_mre_f4.ini
            skip-rate: 95

          - build-target: mre_f4_recovery
            folder: config/boards/microrusefi
            ini-file: rusefi_mre_f4.ini
            skip-rate: 95

          - build-target: mre_f4_hardware_QC_special_build
            folder: config/boards/microrusefi
            ini-file: rusefi_mre_f4.ini
            skip-rate: 90

          - build-target: mre_f7
            folder: config/boards/microrusefi
            ini-file: rusefi_mre_f7.ini
            skip-rate: 90

          - build-target: prometheus_405
            folder: config/boards/prometheus
            ini-file: rusefi_prometheus_405.ini
            skip-rate: 90

          - build-target: prometheus_469
            folder: config/boards/prometheus
            ini-file: rusefi_prometheus_469.ini
            skip-rate: 90

          - build-target: proteus_f4
            folder: config/boards/proteus
            ini-file: rusefi_proteus_f4.ini

          - build-target: proteus_f4_hardware_QC_special_build
            folder: config/boards/proteus
            ini-file: rusefi_proteus_f4.ini

          - build-target: proteus_f7
            folder: config/boards/proteus
            ini-file: rusefi_proteus_f7.ini

          - build-target: proteus_f7_hardware_QC_special_build
            folder: config/boards/proteus
            ini-file: rusefi_proteus_f7.ini
            skip-rate: 90

          - build-target: proteus_h7
            folder: config/boards/proteus
            ini-file: rusefi_proteus_h7.ini
            skip-rate: 90

          - build-target: proteus_legacy
            folder: config/boards/proteus
            ini-file: rusefi_proteus_f7.ini
            skip-rate: 90

          - build-target: stm32f429_nucleo
            folder: config/boards/nucleo_f429
            ini-file: rusefi_stm32f429_nucleo.ini

          - build-target: stm32f767_nucleo
            folder: config/boards/nucleo_f767
            ini-file: rusefi_stm32f767_nucleo.ini
            skip-rate: 95

          - build-target: stm32h743_nucleo
            folder: config/boards/nucleo_h743
            ini-file: rusefi_stm32h743_nucleo.ini
            skip-rate: 95

          - build-target: subaru_eg33_f7
            folder: config/boards/subaru_eg33
            ini-file: rusefi_subaru_eg33_f7.ini
            skip-rate: 50

          - build-target: f407-discovery
            folder: config/boards/f407-discovery
            ini-file: rusefi_f407-discovery.ini
            skip-rate: 0

          - build-target: f429-discovery
            folder: config/boards/f429-discovery
            ini-file: rusefi_f429-discovery.ini
            skip-rate: 95

          - build-target: core8
            folder: config/boards/core8
            ini-file: rusefi_core8.ini
            skip-rate: 95

          - build-target: 48way
            folder: config/boards/48way
            ini-file: rusefi_48way.ini
            skip-rate: 95

          - build-target: atlas
            folder: config/boards/atlas
            ini-file: rusefi_atlas.ini
            skip-rate: 95

          - build-target: tdg-pdm8
            folder: config/boards/tdg-pdm8
            ini-file: rusefi_tdg-pdm8.ini
            skip-rate: 95

    steps:
    - name: Check branch name
      if: ${{ contains(github.ref_name, '.') }}
      run: echo '::error::Branch names must not contain ".", this breaks firmware autoupdates.' && exit 1
    - name: Execution throttle early exit
      # Don't skip any jobs if this workflow was run manually.
      if: ${{ matrix.skip-rate && github.event_name != 'workflow_dispatch' }}
      run: if (($(($RANDOM % 100)) < ${{ matrix.skip-rate }})); then echo "skip=true" >> $GITHUB_ENV; fi

    - uses: actions/checkout@v3
      if: ${{ env.skip != 'true' }}

    - name: Checkout Submodules
      if: ${{ env.skip != 'true' }}
      run: |
        git submodule update --init --depth=1 firmware/ChibiOS
        git submodule update --init --depth=1 firmware/ChibiOS-Contrib
        git submodule update --init --depth=1 firmware/libfirmware
        git submodule update --init --depth=1 firmware/ext/lua
        git submodule update --init --depth=1 firmware/ext/uzlib
        git submodule update --init --depth=1 firmware/ext/openblt
        git submodule update --init --depth=1 firmware/controllers/lua/luaaa
        git submodule update --init --depth=1 firmware/controllers/can/wideband_firmware
        git submodule update --init --depth=1 java_console/luaformatter

    - uses: actions/setup-java@v3
      if: ${{ env.skip != 'true' }}
      with:
        distribution: 'zulu'
        java-version: '8'

    - name: Install multilib, mingw, sshpass and mtools
      if: ${{ env.skip != 'true' }}
      working-directory: ./.github/workflows/
      run: |
        sudo ./add-ubuntu-latest-apt-mirrors.sh
        sudo apt-get install gcc-multilib g++-multilib g++-mingw-w64 gcc-mingw-w64 sshpass mtools
        sudo apt-get install zip
        sudo apt-get install dosfstools

    - name: Generate Live Documentation
      if: ${{ env.skip != 'true' }}
      working-directory: ./firmware/
      run: ./gen_live_documentation.sh

      # live_data_ids.h is generated above so order of operations is important here!
    - name: Generate Enum Strings
      if: ${{ env.skip != 'true' }}
      working-directory: ./firmware/
      run: ./gen_enum_to_string.sh

    - name: Generate Configs for build-target
      if: ${{ env.skip != 'true' }}
      working-directory: ./firmware/
      # todo: we have code duplication with gen_config.sh here :(
      run: |
        if [ "${{ matrix.build-target }}" = "kinetis" ]; then
          config/boards/kinetis/config/gen_kinetis_config.sh
          [ $? -eq 0 ] || { echo "ERROR generating board kinetis kin"; exit 1; }
        elif [ "${{ matrix.build-target }}" = "cypress" ]; then
          config/boards/cypress/config/gen_cypress_config.sh
          [ $? -eq 0 ] || { echo "ERROR generating board cypress cypress"; exit 1; }
        elif [ "${{ matrix.build-target }}" = "subaru_eg33_f7" ]; then
          bash config/boards/subaru_eg33/config/gen_subaru_config.sh
          [ $? -eq 0 ] || { echo "ERROR generating board subaru_eg33 subaru_eg33_f7"; exit 1; }
        elif [ "${{ matrix.ini-file }}" = "" ]; then
          echo "ERROR: ${{ matrix.build-target }} is missing ini-file attribute"
          exit -1
        else
          bash gen_config_board.sh ${{matrix.folder}} ${{matrix.build-target}} ${{matrix.ini-file}}
        fi

    # Build machines don't have arm-none-eabi gcc, so let's download it and put it on the path
    - name: Download & Install GCC
      if: ${{ env.skip != 'true' }}
      env:
        ACTIONS_ALLOW_UNSECURE_COMMANDS: 'true'
      run: |
        ./firmware/provide_gcc.sh
        echo "::add-path::`pwd`/gcc-arm-none-eabi/bin"

    # Make sure the compiler we just downloaded works - just print out the version
    - name: Test Compiler
      if: ${{ env.skip != 'true' }}
      run: arm-none-eabi-gcc -v

    - name: Configs Set SSH variables
      if: ${{ env.skip != 'true' }}
      env:
        ACTIONS_ALLOW_UNSECURE_COMMANDS: 'true'
      run: |
        if [ "${{github.event_name}}" = "push" ] && [ "${{github.ref}}" = "refs/heads/master" ] || [ "${{toJSON(inputs.lts)}}" = "true" ]; then
          echo "::set-env name=RUSEFI_SSH_SERVER::${{secrets.RUSEFI_SSH_SERVER}}";
          echo "::set-env name=RUSEFI_SSH_USER::${{secrets.RUSEFI_SSH_USER}}";
          echo "::set-env name=RUSEFI_SSH_PASS::${{secrets.RUSEFI_SSH_PASS}}";
        fi

    # Build rusEFI console
    - name: Build console
      if: ${{( github.event_name == 'push' && github.ref == 'refs/heads/master' && env.skip != 'true' ) || inputs.lts }}
      run: bash misc/jenkins/build_java_console.sh

    # Build the simulator
    - name: Build simulator
      if: ${{( github.event_name == 'push' && github.ref == 'refs/heads/master' && env.skip != 'true' ) || inputs.lts }}
      # 'OS="Windows_NT"' allows us to build Windows executable on unix
      run: OS="Windows_NT" bash misc/jenkins/build_simulator.sh

    # Build the firmware!
    - name: Build Firmware
      if: ${{ env.skip != 'true' }}
      run: bash misc/jenkins/compile_other_versions/compile.sh ${{matrix.folder}} ${{matrix.build-target}}

    - name: Package Bundle
      if: ${{( github.event_name == 'push' && github.ref == 'refs/heads/master' && env.skip != 'true' ) || inputs.lts }}
      run: bash misc/jenkins/compile_other_versions/prepare_bundle.sh ${{matrix.build-target}} "${{matrix.ini-file}}" ${{ github.ref_name }} ${{ toJSON(inputs.lts) }}

    - name: Upload .ini files
      if: ${{( github.event_name == 'push' && github.ref == 'refs/heads/master' && env.skip != 'true' ) || inputs.lts }}
      working-directory: ./firmware/tunerstudio/generated
      run: |
        ../upload_ini.sh ${{matrix.ini-file}} ${{ secrets.RUSEFI_ONLINE_FTP_USER }} ${{ secrets.RUSEFI_ONLINE_FTP_PASS }} ${{ secrets.RUSEFI_FTP_SERVER }}

    - name: Upload build elf
      if: ${{ github.event_name != 'push' || github.ref != 'refs/heads/master' && env.skip != 'true' && !inputs.lts }}
      uses: actions/upload-artifact@v3
      with:
        name: rusefi_${{matrix.build-target}}.elf
        path: ./firmware/build/rusefi.elf

    - name: Upload build bin
      if: ${{ github.event_name != 'push' || github.ref != 'refs/heads/master' && env.skip != 'true' && !inputs.lts }}
      uses: actions/upload-artifact@v3
      with:
        name: rusefi_${{matrix.build-target}}.bin
        path: ./firmware/deliver/rusefi*.bin

    - name: Upload build hex
      if: ${{ github.event_name != 'push' || github.ref != 'refs/heads/master' && env.skip != 'true' && !inputs.lts }}
      uses: actions/upload-artifact@v3
      with:
        name: rusefi_${{matrix.build-target}}.hex
        path: ./firmware/deliver/rusefi*.hex

    - name: Upload build dfu
      if: ${{ github.event_name != 'push' || github.ref != 'refs/heads/master' && env.skip != 'true' && !inputs.lts }}
      uses: actions/upload-artifact@v3
      with:
        name: rusefi_${{matrix.build-target}}.dfu
        path: ./firmware/deliver/rusefi*.dfu

    - name: Upload bundle
      if: ${{( github.event_name == 'push' && github.ref == 'refs/heads/master' && env.skip != 'true' ) || inputs.lts }}
      uses: actions/upload-artifact@v3
      with:
        name: rusefi_bundle_${{matrix.build-target}}.zip
        path: ./artifacts/rusefi_bundle*.zip

    - name: Upload autoupdate bundle
      if: ${{( github.event_name == 'push' && github.ref == 'refs/heads/master' && env.skip != 'true' ) || inputs.lts }}
      uses: actions/upload-artifact@v3
      with:
        name: rusefi_bundle_${{matrix.build-target}}_autoupdate.zip
        path: ./artifacts/rusefi_bundle_${{matrix.build-target}}_autoupdate.zip