rusefi/firmware/ext/atwinc1500/driver/source/m2m_periph.cpp

106 lines
3.7 KiB
C++
Raw Normal View History

2024-03-01 12:37:55 -08:00
/**
*
* \file
*
* \brief NMC1500 Peripherials Application Interface.
*
* Copyright (c) 2016-2021 Microchip Technology Inc. and its subsidiaries.
*
* \asf_license_start
*
* \page License
*
* Subject to your compliance with these terms, you may use Microchip
* software and any derivatives exclusively with Microchip products.
* It is your responsibility to comply with third party license terms applicable
* to your use of third party software (including open source software) that
* may accompany Microchip software.
*
* THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES,
* WHETHER EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE,
* INCLUDING ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY,
* AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL MICROCHIP BE
* LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL
* LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND WHATSOEVER RELATED TO THE
* SOFTWARE, HOWEVER CAUSED, EVEN IF MICROCHIP HAS BEEN ADVISED OF THE
* POSSIBILITY OR THE DAMAGES ARE FORESEEABLE. TO THE FULLEST EXTENT
* ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL CLAIMS IN ANY WAY
* RELATED TO THIS SOFTWARE WILL NOT EXCEED THE AMOUNT OF FEES, IF ANY,
* THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS SOFTWARE.
*
* \asf_license_stop
*
*/
/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
INCLUDES
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
#include "driver/include/m2m_periph.h"
#include "driver/source/nmasic.h"
#include "m2m_hif.h"
#ifdef CONF_PERIPH
/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
MACROS
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
#define GPIO_OP_DIR 0
#define GPIO_OP_SET 1
#define GPIO_OP_GET 2
/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
DATA TYPES
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
STATIC FUNCTIONS
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
/*
* GPIO read/write skeleton with wakeup/sleep capability.
*/
static sint8 gpio_ioctl(uint8 op, uint8 u8GpioNum, uint8 u8InVal, uint8 * pu8OutVal)
{
sint8 s8Ret = hif_chip_wake();
if(s8Ret != M2M_SUCCESS) goto _EXIT;
if(u8GpioNum >= M2M_PERIPH_GPIO_MAX) goto _EXIT1;
if(op == GPIO_OP_DIR) {
s8Ret = set_gpio_dir(u8GpioNum, u8InVal);
} else if(op == GPIO_OP_SET) {
s8Ret = set_gpio_val(u8GpioNum, u8InVal);
} else if(op == GPIO_OP_GET) {
s8Ret = get_gpio_val(u8GpioNum, pu8OutVal);
}
_EXIT1:
s8Ret = hif_chip_sleep();
_EXIT:
return s8Ret;
}
/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
FUNCTION IMPLEMENTATION
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
sint8 m2m_periph_gpio_set_dir(uint8 u8GpioNum, uint8 u8GpioDir)
{
return gpio_ioctl(GPIO_OP_DIR, u8GpioNum, u8GpioDir, NULL);
}
sint8 m2m_periph_gpio_set_val(uint8 u8GpioNum, uint8 u8GpioVal)
{
return gpio_ioctl(GPIO_OP_SET, u8GpioNum, u8GpioVal, NULL);
}
sint8 m2m_periph_gpio_get_val(uint8 u8GpioNum, uint8 * pu8GpioVal)
{
return gpio_ioctl(GPIO_OP_GET, u8GpioNum, 0, pu8GpioVal);
}
sint8 m2m_periph_pullup_ctrl(uint32 pinmask, uint8 enable)
{
return pullup_ctrl(pinmask, enable);
}
#endif /* CONF_PERIPH */