starting with lame analog

only:alphax-4k-gdi

firmware/config/boards/hellen/alphax-4K-GDI/board.mk

@@ -7,7 +7,7 @@ BOARDCPPSRC = $(BOARD_DIR)/board_configuration.cpp
 
 DDEFS += -DEFI_MAIN_RELAY_CONTROL=TRUE
 DDEFS += -DEFI_MC33816=TRUE
-DDEFS += -DBOARD_TLE9104_COUNT=4
+DDEFS += -DBOARD_TLE9104_COUNT=1
 
 
 

firmware/config/boards/hellen/alphax-4K-GDI/board_configuration.cpp

@@ -2,6 +2,7 @@
 #include "pch.h"
 #include "defaults.h"
 #include "hellen_meta.h"
+#include "drivers/gpio/tle9104.h"
 
 void setBoardConfigOverrides() {
     setHellenSdCardSpi1Hardware();
@@ -22,11 +23,12 @@ void setBoardConfigOverrides() {
 }
 
 void setBoardDefaultConfiguration() {
-	engineConfiguration->injectionPins[0] = Gpio::H144_LS_1;
-	engineConfiguration->injectionPins[1] = Gpio::H144_LS_2;
-	engineConfiguration->injectionPins[2] = Gpio::H144_LS_3;
-	engineConfiguration->injectionPins[3] = Gpio::H144_LS_4;
+	engineConfiguration->injectionPins[0] = Gpio::TLE9104_0_OUT_0;
+	engineConfiguration->injectionPins[1] = Gpio::TLE9104_0_OUT_1;
+	engineConfiguration->injectionPins[2] = Gpio::TLE9104_0_OUT_2;
+	engineConfiguration->injectionPins[3] = Gpio::TLE9104_0_OUT_3;
 
+	engineConfiguration->map.sensor.hwChannel = H144_IN_MAP1;
 	engineConfiguration->clt.adcChannel = H144_IN_CLT;
 	engineConfiguration->iat.adcChannel = H144_IN_IAT;
 	engineConfiguration->tps1_1AdcChannel = H144_IN_TPS;
@@ -34,6 +36,34 @@ void setBoardDefaultConfiguration() {
 	setPPSInputs(H144_IN_PPS, H144_IN_PPS2);
 }
 
+static const tle9104_config tle9104_cfg[BOARD_TLE9104_COUNT] = {
+	{
+		.spi_bus = &SPID2,
+		.spi_config = {
+			.circular = false,
+			.end_cb = NULL,
+			.ssport = GPIOD,
+			.sspad = 4,
+			.cr1 =
+				SPI_CR1_16BIT_MODE |
+				SPI_CR1_SSM |
+				SPI_CR1_SSI |
+				((3 << SPI_CR1_BR_Pos) & SPI_CR1_BR) |	// div = 16
+				SPI_CR1_MSTR |
+				SPI_CR1_CPHA |
+				0,
+			.cr2 = SPI_CR2_16BIT_MODE
+		},
+		.direct_io = {
+			{ .port = GPIOD, .pad = 3 },
+			{ .port = GPIOA, .pad = 9 },
+			{ .port = GPIOG, .pad = 14 },
+			{ .port = GPIOG, .pad = 5 }
+		},
+		.resn = Gpio::Unassigned,
+		.en   = Gpio::Unassigned
+	}};
+
 /*PUBLIC_API_WEAK*/ void boardInitHardware() {
   setHellenMegaEnPin();
     {
@@ -55,6 +85,16 @@ void setBoardDefaultConfiguration() {
     	static OutputPin csLs4;
 	    csLs4.initPin("csLs4", Gpio::H144_GP_IO4);
 	    csLs4.setValue(1);
+    }
+	{
+	  static OutputPin TleEn;
+	  TleEn.initPin("TLE9104 En", H144_UART8_RX);
+	  TleEn.setValue(1);
+	  }
+	  {
+	    static OutputPin TleReset;
+	    TleReset.initPin("TLE9104 Reset", H144_UART8_TX);
+	    TleReset.setValue(1);
     }
     {
     	static OutputPin csDcEtb;
@@ -66,5 +106,20 @@ void setBoardDefaultConfiguration() {
 	    csDcAux.initPin("cs-dc-aux", Gpio::H144_GP_IO6);
 	    csDcAux.setValue(1);
     }
-
 }
+
+static Gpio OUTPUTS[] = {
+	Gpio::TLE9104_0_OUT_0,
+	Gpio::TLE9104_0_OUT_1,
+	Gpio::TLE9104_0_OUT_2,
+	Gpio::TLE9104_0_OUT_3,
+};
+
+int getBoardMetaOutputsCount() {
+    return efi::size(OUTPUTS);
+}
+
+Gpio* getBoardMetaOutputs() {
+    return OUTPUTS;
+}
+

firmware/config/boards/hellen/alphax-4K-GDI/connectors/gdi-A.yaml

@@ -91,6 +91,7 @@ pins:
     function: TPS 1 signal
     ts_name: ___ TPS1
     meta: H144_IN_TPS
+    color: green
     type: av
     class: analog_inputs
 
@@ -98,12 +99,14 @@ pins:
     function: TPS 2 signal
     ts_name: ___ TPS2
     meta: H144_IN_TPS2
+    color: blue
     type: av
     class: analog_inputs
 
 
   - pin: 21A
     function: ECT CLT Coolant
+    color: grey
     type: at
     meta: H144_IN_CLT
     class: analog_inputs
@@ -111,6 +114,7 @@ pins:
 
   - pin: 22A
     function: IAT
+    color: blue
     type: at
     meta: H144_IN_IAT
     class: analog_inputs
@@ -118,6 +122,7 @@ pins:
   - pin: 23A
     function: MAP Signal
     type: av
+    color: yellow
     meta: H144_IN_MAP1
     class: analog_inputs
 

firmware/config/boards/hellen/alphax-4K-GDI/connectors/gdi-B.yaml

@@ -6,6 +6,7 @@ pins:
     class: outputs
     ts_name: ___ Port injector 4
     function: Port injector 4
+    color: orange/brown
     type: ls
 
   - pin: 2B
@@ -13,6 +14,7 @@ pins:
     class: outputs
     ts_name: ___ Port injector 3
     function: Port injector 3
+    color: blue
     type: ls
 
   - pin: 3B
@@ -20,6 +22,7 @@ pins:
     class: outputs
     ts_name: ___ Port injector 2
     function: Port injector 2
+    color: white
     type: ls
 
   - pin: 4B
@@ -27,6 +30,7 @@ pins:
     class: outputs
     ts_name: ___ Port injector 1
     function: Port injector 1
+    color: green
     type: ls
 
   - pin: 5B
@@ -57,6 +61,7 @@ pins:
     meta: H144_IN_PPS
     class: analog_inputs
     ts_name: ___ PPS1
+    color: white
 
   - pin: 20B
     function: PPS 2
@@ -64,6 +69,7 @@ pins:
     meta: H144_IN_PPS2
     class: analog_inputs
     ts_name: ___ PPS2
+    color: orange/brown
 
   - pin: 26B
     function: Power GND

firmware/config/boards/hellen_meta.h

@@ -36,8 +36,8 @@ int detectHellenBoardId();
 void detectHellenBoardType();
 
 // stm32 UART8
-#define H144_UART1_RX Gpio::E0
-#define H144_UART1_TX Gpio::E1
+#define H144_UART8_RX Gpio::E0
+#define H144_UART8_TX Gpio::E1
 
 // stm32 UART2
 #define H144_UART2_RX Gpio::D6

firmware/config/engines/gm_sbc.cpp

@@ -25,7 +25,7 @@ void setStepperHw() {
 	engineConfiguration->stepperDcIo[0].directionPin2 = Gpio::Unassigned;
 	engineConfiguration->stepperDcIo[0].disablePin = Gpio::H144_GP_IO5; // ETB_DIS
 	// using 8chan pinout for DC2: A28 (OUT_DC2+ BL pin "A") and A29 (OUT_DC2- BH pin "B")
-	engineConfiguration->stepperDcIo[1].controlPin = H144_UART1_TX; // DC2_PWM
+	engineConfiguration->stepperDcIo[1].controlPin = H144_UART8_TX; // DC2_PWM
 	engineConfiguration->stepperDcIo[1].directionPin1 = H_SPI3_CS; // DC2_DIR
 	engineConfiguration->stepperDcIo[1].directionPin2 = Gpio::Unassigned;
 #endif // HW_HELLEN