Auto-generated configs and docs
This commit is contained in:
GitHub build-firmware Action
parent
07e25ccf3c
commit
1a73258778
|
|
@ -1,4 +1,4 @@
|
|||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Wed Nov 11 04:12:47 UTC 2020
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Sat Nov 14 23:07:45 UTC 2020
|
||||
// by class com.rusefi.output.CHeaderConsumer
|
||||
// begin
|
||||
#pragma once
|
||||
|
|
@ -751,14 +751,14 @@ struct engine_configuration_s {
|
|||
offset 76 bit 31 */
|
||||
bool unusedBit_34_31 : 1;
|
||||
/**
|
||||
* Closed throttle. todo: extract these two fields into a structure
|
||||
* Closed throttle, 1 volt = 200 units.
|
||||
* See also tps1_1AdcChannel
|
||||
* set tps_min X
|
||||
* offset 80
|
||||
*/
|
||||
int16_t tpsMin;
|
||||
/**
|
||||
* Full throttle. tpsMax value as 10 bit ADC value. Not Voltage!
|
||||
* Full throttle.
|
||||
* See also tps1_1AdcChannel
|
||||
* set tps_max X
|
||||
* offset 82
|
||||
|
|
@ -1338,6 +1338,7 @@ struct engine_configuration_s {
|
|||
/**
|
||||
* Voltage when the wastegate is fully open.
|
||||
* You probably don't have one of these!
|
||||
* 1 volt = 1000 units
|
||||
* offset 718
|
||||
*/
|
||||
uint16_t wastegatePositionMax;
|
||||
|
|
@ -1350,6 +1351,7 @@ struct engine_configuration_s {
|
|||
/**
|
||||
* Voltage when the idle valve is open.
|
||||
* You probably don't have one of these!
|
||||
* 1 volt = 1000 units
|
||||
* offset 722
|
||||
*/
|
||||
uint16_t idlePositionMax;
|
||||
|
|
@ -3767,4 +3769,4 @@ struct persistent_config_s {
|
|||
typedef struct persistent_config_s persistent_config_s;
|
||||
|
||||
// end
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Wed Nov 11 04:12:47 UTC 2020
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Sat Nov 14 23:07:45 UTC 2020
|
||||
|
|
|
|||
|
|
@ -1211,8 +1211,8 @@
|
|||
#define showHumanReadableWarning_offset 976
|
||||
#define showSdCardWarning_offset 76
|
||||
#define SIGNATURE_BOARD hellen_cypress
|
||||
#define SIGNATURE_DATE 2020.11.11
|
||||
#define SIGNATURE_HASH 1928150240
|
||||
#define SIGNATURE_DATE 2020.11.14
|
||||
#define SIGNATURE_HASH 1029363030
|
||||
#define silentTriggerError_offset 1464
|
||||
#define slowAdcAlpha_offset 2088
|
||||
#define sparkDwellRpmBins_offset 332
|
||||
|
|
@ -1532,7 +1532,7 @@
|
|||
#define ts_show_spi true
|
||||
#define ts_show_trigger_comparator false
|
||||
#define ts_show_tunerstudio_port true
|
||||
#define TS_SIGNATURE "rusEFI 2020.11.11.hellen_cypress.1928150240"
|
||||
#define TS_SIGNATURE "rusEFI 2020.11.14.hellen_cypress.1029363030"
|
||||
#define TS_SINGLE_WRITE_COMMAND 'W'
|
||||
#define TS_SINGLE_WRITE_COMMAND_char W
|
||||
#define TS_TEST_COMMAND 't' // 0x74
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Wed Nov 11 04:12:45 UTC 2020
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Sat Nov 14 23:07:43 UTC 2020
|
||||
// by class com.rusefi.output.CHeaderConsumer
|
||||
// begin
|
||||
#pragma once
|
||||
|
|
@ -751,14 +751,14 @@ struct engine_configuration_s {
|
|||
offset 76 bit 31 */
|
||||
bool unusedBit_34_31 : 1;
|
||||
/**
|
||||
* Closed throttle. todo: extract these two fields into a structure
|
||||
* Closed throttle, 1 volt = 200 units.
|
||||
* See also tps1_1AdcChannel
|
||||
* set tps_min X
|
||||
* offset 80
|
||||
*/
|
||||
int16_t tpsMin;
|
||||
/**
|
||||
* Full throttle. tpsMax value as 10 bit ADC value. Not Voltage!
|
||||
* Full throttle.
|
||||
* See also tps1_1AdcChannel
|
||||
* set tps_max X
|
||||
* offset 82
|
||||
|
|
@ -1338,6 +1338,7 @@ struct engine_configuration_s {
|
|||
/**
|
||||
* Voltage when the wastegate is fully open.
|
||||
* You probably don't have one of these!
|
||||
* 1 volt = 1000 units
|
||||
* offset 718
|
||||
*/
|
||||
uint16_t wastegatePositionMax;
|
||||
|
|
@ -1350,6 +1351,7 @@ struct engine_configuration_s {
|
|||
/**
|
||||
* Voltage when the idle valve is open.
|
||||
* You probably don't have one of these!
|
||||
* 1 volt = 1000 units
|
||||
* offset 722
|
||||
*/
|
||||
uint16_t idlePositionMax;
|
||||
|
|
@ -3767,4 +3769,4 @@ struct persistent_config_s {
|
|||
typedef struct persistent_config_s persistent_config_s;
|
||||
|
||||
// end
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Wed Nov 11 04:12:45 UTC 2020
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Sat Nov 14 23:07:43 UTC 2020
|
||||
|
|
|
|||
|
|
@ -1211,8 +1211,8 @@
|
|||
#define showHumanReadableWarning_offset 976
|
||||
#define showSdCardWarning_offset 76
|
||||
#define SIGNATURE_BOARD kin
|
||||
#define SIGNATURE_DATE 2020.11.11
|
||||
#define SIGNATURE_HASH 602998298
|
||||
#define SIGNATURE_DATE 2020.11.14
|
||||
#define SIGNATURE_HASH 1816588204
|
||||
#define silentTriggerError_offset 1464
|
||||
#define slowAdcAlpha_offset 2088
|
||||
#define sparkDwellRpmBins_offset 332
|
||||
|
|
@ -1532,7 +1532,7 @@
|
|||
#define ts_show_spi true
|
||||
#define ts_show_trigger_comparator true
|
||||
#define ts_show_tunerstudio_port true
|
||||
#define TS_SIGNATURE "rusEFI 2020.11.11.kin.602998298"
|
||||
#define TS_SIGNATURE "rusEFI 2020.11.14.kin.1816588204"
|
||||
#define TS_SINGLE_WRITE_COMMAND 'W'
|
||||
#define TS_SINGLE_WRITE_COMMAND_char W
|
||||
#define TS_TEST_COMMAND 't' // 0x74
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Nov 11 04:12:24 UTC 2020
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Nov 14 23:07:26 UTC 2020
|
||||
// by class com.rusefi.output.CHeaderConsumer
|
||||
// begin
|
||||
#pragma once
|
||||
|
|
@ -751,14 +751,14 @@ struct engine_configuration_s {
|
|||
offset 76 bit 31 */
|
||||
bool unusedBit_34_31 : 1;
|
||||
/**
|
||||
* Closed throttle. todo: extract these two fields into a structure
|
||||
* Closed throttle, 1 volt = 200 units.
|
||||
* See also tps1_1AdcChannel
|
||||
* set tps_min X
|
||||
* offset 80
|
||||
*/
|
||||
int16_t tpsMin;
|
||||
/**
|
||||
* Full throttle. tpsMax value as 10 bit ADC value. Not Voltage!
|
||||
* Full throttle.
|
||||
* See also tps1_1AdcChannel
|
||||
* set tps_max X
|
||||
* offset 82
|
||||
|
|
@ -1338,6 +1338,7 @@ struct engine_configuration_s {
|
|||
/**
|
||||
* Voltage when the wastegate is fully open.
|
||||
* You probably don't have one of these!
|
||||
* 1 volt = 1000 units
|
||||
* offset 718
|
||||
*/
|
||||
uint16_t wastegatePositionMax;
|
||||
|
|
@ -1350,6 +1351,7 @@ struct engine_configuration_s {
|
|||
/**
|
||||
* Voltage when the idle valve is open.
|
||||
* You probably don't have one of these!
|
||||
* 1 volt = 1000 units
|
||||
* offset 722
|
||||
*/
|
||||
uint16_t idlePositionMax;
|
||||
|
|
@ -3767,4 +3769,4 @@ struct persistent_config_s {
|
|||
typedef struct persistent_config_s persistent_config_s;
|
||||
|
||||
// end
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Nov 11 04:12:24 UTC 2020
|
||||
// this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Nov 14 23:07:26 UTC 2020
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Nov 11 04:12:24 UTC 2020
|
||||
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Nov 14 23:07:26 UTC 2020
|
||||
|
||||
// by class com.rusefi.output.FileFsioSettingsConsumer
|
||||
FSIO_SETTING_FANONTEMPERATURE = 1000,
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Nov 11 04:12:24 UTC 2020
|
||||
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Nov 14 23:07:26 UTC 2020
|
||||
|
||||
// by class com.rusefi.output.FileFsioSettingsConsumer
|
||||
case FSIO_SETTING_FANONTEMPERATURE:
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Nov 11 04:12:24 UTC 2020
|
||||
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Nov 14 23:07:26 UTC 2020
|
||||
|
||||
// by class com.rusefi.output.FileFsioSettingsConsumer
|
||||
static LENameOrdinalPair lefanOnTemperature(FSIO_SETTING_FANONTEMPERATURE, "cfg_fanOnTemperature");
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Nov 11 04:12:24 UTC 2020
|
||||
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Nov 14 23:07:26 UTC 2020
|
||||
|
||||
// by class com.rusefi.output.FileFsioSettingsConsumer
|
||||
case FSIO_SETTING_FANONTEMPERATURE:
|
||||
|
|
|
|||
|
|
@ -1211,8 +1211,8 @@
|
|||
#define showHumanReadableWarning_offset 976
|
||||
#define showSdCardWarning_offset 76
|
||||
#define SIGNATURE_BOARD all
|
||||
#define SIGNATURE_DATE 2020.11.11
|
||||
#define SIGNATURE_HASH 3139213859
|
||||
#define SIGNATURE_DATE 2020.11.14
|
||||
#define SIGNATURE_HASH 4104876949
|
||||
#define silentTriggerError_offset 1464
|
||||
#define slowAdcAlpha_offset 2088
|
||||
#define sparkDwellRpmBins_offset 332
|
||||
|
|
@ -1532,7 +1532,7 @@
|
|||
#define ts_show_spi true
|
||||
#define ts_show_trigger_comparator false
|
||||
#define ts_show_tunerstudio_port true
|
||||
#define TS_SIGNATURE "rusEFI 2020.11.11.all.3139213859"
|
||||
#define TS_SIGNATURE "rusEFI 2020.11.14.all.4104876949"
|
||||
#define TS_SINGLE_WRITE_COMMAND 'W'
|
||||
#define TS_SINGLE_WRITE_COMMAND_char W
|
||||
#define TS_TEST_COMMAND 't' // 0x74
|
||||
|
|
|
|||
|
|
@ -3,6 +3,6 @@
|
|||
//
|
||||
|
||||
#define SIGNATURE_BOARD all
|
||||
#define SIGNATURE_DATE 2020.11.12
|
||||
#define SIGNATURE_HASH 2426575371
|
||||
#define TS_SIGNATURE "rusEFI 2020.11.12.all.2426575371"
|
||||
#define SIGNATURE_DATE 2020.11.14
|
||||
#define SIGNATURE_HASH 4104876949
|
||||
#define TS_SIGNATURE "rusEFI 2020.11.14.all.4104876949"
|
||||
|
|
|
|||
|
|
@ -3,6 +3,6 @@
|
|||
//
|
||||
|
||||
#define SIGNATURE_BOARD frankenso_na6
|
||||
#define SIGNATURE_DATE 2020.11.12
|
||||
#define SIGNATURE_HASH 114437104
|
||||
#define TS_SIGNATURE "rusEFI 2020.11.12.frankenso_na6.114437104"
|
||||
#define SIGNATURE_DATE 2020.11.14
|
||||
#define SIGNATURE_HASH 1658569326
|
||||
#define TS_SIGNATURE "rusEFI 2020.11.14.frankenso_na6.1658569326"
|
||||
|
|
|
|||
|
|
@ -3,6 +3,6 @@
|
|||
//
|
||||
|
||||
#define SIGNATURE_BOARD hellen_cypress
|
||||
#define SIGNATURE_DATE 2020.11.12
|
||||
#define SIGNATURE_HASH 1498627272
|
||||
#define TS_SIGNATURE "rusEFI 2020.11.12.hellen_cypress.1498627272"
|
||||
#define SIGNATURE_DATE 2020.11.14
|
||||
#define SIGNATURE_HASH 1029363030
|
||||
#define TS_SIGNATURE "rusEFI 2020.11.14.hellen_cypress.1029363030"
|
||||
|
|
|
|||
|
|
@ -3,6 +3,6 @@
|
|||
//
|
||||
|
||||
#define SIGNATURE_BOARD kin
|
||||
#define SIGNATURE_DATE 2020.11.12
|
||||
#define SIGNATURE_HASH 139396658
|
||||
#define TS_SIGNATURE "rusEFI 2020.11.12.kin.139396658"
|
||||
#define SIGNATURE_DATE 2020.11.14
|
||||
#define SIGNATURE_HASH 1816588204
|
||||
#define TS_SIGNATURE "rusEFI 2020.11.14.kin.1816588204"
|
||||
|
|
|
|||
|
|
@ -3,6 +3,6 @@
|
|||
//
|
||||
|
||||
#define SIGNATURE_BOARD mre_f4
|
||||
#define SIGNATURE_DATE 2020.11.12
|
||||
#define SIGNATURE_HASH 4169740901
|
||||
#define TS_SIGNATURE "rusEFI 2020.11.12.mre_f4.4169740901"
|
||||
#define SIGNATURE_DATE 2020.11.14
|
||||
#define SIGNATURE_HASH 2625690619
|
||||
#define TS_SIGNATURE "rusEFI 2020.11.14.mre_f4.2625690619"
|
||||
|
|
|
|||
|
|
@ -3,6 +3,6 @@
|
|||
//
|
||||
|
||||
#define SIGNATURE_BOARD mre_f7
|
||||
#define SIGNATURE_DATE 2020.11.12
|
||||
#define SIGNATURE_HASH 4169740901
|
||||
#define TS_SIGNATURE "rusEFI 2020.11.12.mre_f7.4169740901"
|
||||
#define SIGNATURE_DATE 2020.11.14
|
||||
#define SIGNATURE_HASH 2625690619
|
||||
#define TS_SIGNATURE "rusEFI 2020.11.14.mre_f7.2625690619"
|
||||
|
|
|
|||
|
|
@ -3,6 +3,6 @@
|
|||
//
|
||||
|
||||
#define SIGNATURE_BOARD prometheus_405
|
||||
#define SIGNATURE_DATE 2020.11.12
|
||||
#define SIGNATURE_HASH 3531250778
|
||||
#define TS_SIGNATURE "rusEFI 2020.11.12.prometheus_405.3531250778"
|
||||
#define SIGNATURE_DATE 2020.11.14
|
||||
#define SIGNATURE_HASH 3061020100
|
||||
#define TS_SIGNATURE "rusEFI 2020.11.14.prometheus_405.3061020100"
|
||||
|
|
|
|||
|
|
@ -3,6 +3,6 @@
|
|||
//
|
||||
|
||||
#define SIGNATURE_BOARD prometheus_469
|
||||
#define SIGNATURE_DATE 2020.11.12
|
||||
#define SIGNATURE_HASH 3531250778
|
||||
#define TS_SIGNATURE "rusEFI 2020.11.12.prometheus_469.3531250778"
|
||||
#define SIGNATURE_DATE 2020.11.14
|
||||
#define SIGNATURE_HASH 3061020100
|
||||
#define TS_SIGNATURE "rusEFI 2020.11.14.prometheus_469.3061020100"
|
||||
|
|
|
|||
|
|
@ -3,6 +3,6 @@
|
|||
//
|
||||
|
||||
#define SIGNATURE_BOARD proteus_f4
|
||||
#define SIGNATURE_DATE 2020.11.12
|
||||
#define SIGNATURE_HASH 1493749973
|
||||
#define TS_SIGNATURE "rusEFI 2020.11.12.proteus_f4.1493749973"
|
||||
#define SIGNATURE_DATE 2020.11.14
|
||||
#define SIGNATURE_HASH 1023490379
|
||||
#define TS_SIGNATURE "rusEFI 2020.11.14.proteus_f4.1023490379"
|
||||
|
|
|
|||
|
|
@ -3,6 +3,6 @@
|
|||
//
|
||||
|
||||
#define SIGNATURE_BOARD proteus_f7
|
||||
#define SIGNATURE_DATE 2020.11.12
|
||||
#define SIGNATURE_HASH 1493749973
|
||||
#define TS_SIGNATURE "rusEFI 2020.11.12.proteus_f7.1493749973"
|
||||
#define SIGNATURE_DATE 2020.11.14
|
||||
#define SIGNATURE_HASH 1023490379
|
||||
#define TS_SIGNATURE "rusEFI 2020.11.14.proteus_f7.1023490379"
|
||||
|
|
|
|||
Binary file not shown.
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI 2020.11.12.all.2426575371"
|
||||
signature = "rusEFI 2020.11.14.all.4104876949"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmwave version for title bar.
|
||||
signature = "rusEFI 2020.11.12.all.2426575371" ; signature is expected to be 7 or more characters.
|
||||
signature = "rusEFI 2020.11.14.all.4104876949" ; signature is expected to be 7 or more characters.
|
||||
|
||||
[Constants]
|
||||
; new packet serial format with CRC
|
||||
|
|
@ -74,7 +74,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 12 02:48:50 UTC 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Nov 14 23:07:26 UTC 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -1268,6 +1268,8 @@ page = 1
|
|||
cj125isUrDivided = "Is your UR CJ125 output wired to MCU via resistor divider?\nLooks like 3v range should be enough, divider generally not needed."
|
||||
useCicPidForIdle = "Switch between Industrial and Cic PID implementation"
|
||||
absoluteFuelPressure = "If your fuel regulator does not have vacuum line"
|
||||
tpsMin = "Closed throttle, 1 volt = 200 units.\nSee also tps1_1AdcChannel\nset tps_min X"
|
||||
tpsMax = "Full throttle.\nSee also tps1_1AdcChannel\nset tps_max X"
|
||||
tpsErrorDetectionTooLow = "TPS error detection: what throttle % is unrealistically low?\nAlso used for accelerator pedal error detection if so equiped."
|
||||
tpsErrorDetectionTooHigh = "TPS error detection: what throttle % is unrealistically high?\nAlso used for accelerator pedal error detection if so equiped."
|
||||
cranking_baseFuel = "Base mass of the per-cylinder fuel injected during cranking. This is then modified by the multipliers for CLT, IAT, TPS ect, to give the final cranking pulse width.\nA reasonable starting point is 60mg per liter per cylinder.\nex: 2 liter 4 cyl = 500cc/cyl, so 30mg cranking fuel."
|
||||
|
|
@ -1308,6 +1310,12 @@ page = 1
|
|||
malfunctionIndicatorPin = "Check engine light, also malfunction indicator light. Always blinks once on boot."
|
||||
idle_antiwindupFreq = "0.1 is a good default value"
|
||||
acIdleExtraOffset = "Additional idle PID offset while A/C is active"
|
||||
can2SleepPeriodMs = "CANbus thread period, ms"
|
||||
wastegatePositionMin = "Voltage when the wastegate is closed.\nYou probably don't have one of these!"
|
||||
wastegatePositionMax = "Voltage when the wastegate is fully open.\nYou probably don't have one of these!\n1 volt = 1000 units"
|
||||
idlePositionMin = "Voltage when the idle valve is closed.\nYou probably don't have one of these!"
|
||||
idlePositionMax = "Voltage when the idle valve is open.\nYou probably don't have one of these!\n1 volt = 1000 units"
|
||||
tunerStudioSerialSpeed = "Secondary TTL channel baud rate"
|
||||
compressionRatio = "Just for reference really, not taken into account by any logic at this point"
|
||||
useStepperIdle = "This setting should only be used if you have a stepper motor idle valve and a stepper motor driver installed."
|
||||
enableVerboseCanTx = "CAN broadcast using custom rusEFI protocol\nenable can_broadcast/disable can_broadcast"
|
||||
|
|
|
|||
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI 2020.11.12.frankenso_na6.114437104"
|
||||
signature = "rusEFI 2020.11.14.frankenso_na6.1658569326"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmwave version for title bar.
|
||||
signature = "rusEFI 2020.11.12.frankenso_na6.114437104" ; signature is expected to be 7 or more characters.
|
||||
signature = "rusEFI 2020.11.14.frankenso_na6.1658569326" ; signature is expected to be 7 or more characters.
|
||||
|
||||
[Constants]
|
||||
; new packet serial format with CRC
|
||||
|
|
@ -74,7 +74,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 12 02:48:55 UTC 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Nov 14 23:07:31 UTC 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -1268,6 +1268,8 @@ page = 1
|
|||
cj125isUrDivided = "Is your UR CJ125 output wired to MCU via resistor divider?\nLooks like 3v range should be enough, divider generally not needed."
|
||||
useCicPidForIdle = "Switch between Industrial and Cic PID implementation"
|
||||
absoluteFuelPressure = "If your fuel regulator does not have vacuum line"
|
||||
tpsMin = "Closed throttle, 1 volt = 200 units.\nSee also tps1_1AdcChannel\nset tps_min X"
|
||||
tpsMax = "Full throttle.\nSee also tps1_1AdcChannel\nset tps_max X"
|
||||
tpsErrorDetectionTooLow = "TPS error detection: what throttle % is unrealistically low?\nAlso used for accelerator pedal error detection if so equiped."
|
||||
tpsErrorDetectionTooHigh = "TPS error detection: what throttle % is unrealistically high?\nAlso used for accelerator pedal error detection if so equiped."
|
||||
cranking_baseFuel = "Base mass of the per-cylinder fuel injected during cranking. This is then modified by the multipliers for CLT, IAT, TPS ect, to give the final cranking pulse width.\nA reasonable starting point is 60mg per liter per cylinder.\nex: 2 liter 4 cyl = 500cc/cyl, so 30mg cranking fuel."
|
||||
|
|
@ -1308,6 +1310,12 @@ page = 1
|
|||
malfunctionIndicatorPin = "Check engine light, also malfunction indicator light. Always blinks once on boot."
|
||||
idle_antiwindupFreq = "0.1 is a good default value"
|
||||
acIdleExtraOffset = "Additional idle PID offset while A/C is active"
|
||||
can2SleepPeriodMs = "CANbus thread period, ms"
|
||||
wastegatePositionMin = "Voltage when the wastegate is closed.\nYou probably don't have one of these!"
|
||||
wastegatePositionMax = "Voltage when the wastegate is fully open.\nYou probably don't have one of these!\n1 volt = 1000 units"
|
||||
idlePositionMin = "Voltage when the idle valve is closed.\nYou probably don't have one of these!"
|
||||
idlePositionMax = "Voltage when the idle valve is open.\nYou probably don't have one of these!\n1 volt = 1000 units"
|
||||
tunerStudioSerialSpeed = "Secondary TTL channel baud rate"
|
||||
compressionRatio = "Just for reference really, not taken into account by any logic at this point"
|
||||
useStepperIdle = "This setting should only be used if you have a stepper motor idle valve and a stepper motor driver installed."
|
||||
enableVerboseCanTx = "CAN broadcast using custom rusEFI protocol\nenable can_broadcast/disable can_broadcast"
|
||||
|
|
|
|||
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI 2020.11.12.hellen_cypress.1498627272"
|
||||
signature = "rusEFI 2020.11.14.hellen_cypress.1029363030"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmwave version for title bar.
|
||||
signature = "rusEFI 2020.11.12.hellen_cypress.1498627272" ; signature is expected to be 7 or more characters.
|
||||
signature = "rusEFI 2020.11.14.hellen_cypress.1029363030" ; signature is expected to be 7 or more characters.
|
||||
|
||||
[Constants]
|
||||
; new packet serial format with CRC
|
||||
|
|
@ -74,7 +74,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Thu Nov 12 02:49:05 UTC 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Sat Nov 14 23:07:45 UTC 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -1268,6 +1268,8 @@ page = 1
|
|||
cj125isUrDivided = "Is your UR CJ125 output wired to MCU via resistor divider?\nLooks like 3v range should be enough, divider generally not needed."
|
||||
useCicPidForIdle = "Switch between Industrial and Cic PID implementation"
|
||||
absoluteFuelPressure = "If your fuel regulator does not have vacuum line"
|
||||
tpsMin = "Closed throttle, 1 volt = 200 units.\nSee also tps1_1AdcChannel\nset tps_min X"
|
||||
tpsMax = "Full throttle.\nSee also tps1_1AdcChannel\nset tps_max X"
|
||||
tpsErrorDetectionTooLow = "TPS error detection: what throttle % is unrealistically low?\nAlso used for accelerator pedal error detection if so equiped."
|
||||
tpsErrorDetectionTooHigh = "TPS error detection: what throttle % is unrealistically high?\nAlso used for accelerator pedal error detection if so equiped."
|
||||
cranking_baseFuel = "Base mass of the per-cylinder fuel injected during cranking. This is then modified by the multipliers for CLT, IAT, TPS ect, to give the final cranking pulse width.\nA reasonable starting point is 60mg per liter per cylinder.\nex: 2 liter 4 cyl = 500cc/cyl, so 30mg cranking fuel."
|
||||
|
|
@ -1308,6 +1310,12 @@ page = 1
|
|||
malfunctionIndicatorPin = "Check engine light, also malfunction indicator light. Always blinks once on boot."
|
||||
idle_antiwindupFreq = "0.1 is a good default value"
|
||||
acIdleExtraOffset = "Additional idle PID offset while A/C is active"
|
||||
can2SleepPeriodMs = "CANbus thread period, ms"
|
||||
wastegatePositionMin = "Voltage when the wastegate is closed.\nYou probably don't have one of these!"
|
||||
wastegatePositionMax = "Voltage when the wastegate is fully open.\nYou probably don't have one of these!\n1 volt = 1000 units"
|
||||
idlePositionMin = "Voltage when the idle valve is closed.\nYou probably don't have one of these!"
|
||||
idlePositionMax = "Voltage when the idle valve is open.\nYou probably don't have one of these!\n1 volt = 1000 units"
|
||||
tunerStudioSerialSpeed = "Secondary TTL channel baud rate"
|
||||
compressionRatio = "Just for reference really, not taken into account by any logic at this point"
|
||||
useStepperIdle = "This setting should only be used if you have a stepper motor idle valve and a stepper motor driver installed."
|
||||
enableVerboseCanTx = "CAN broadcast using custom rusEFI protocol\nenable can_broadcast/disable can_broadcast"
|
||||
|
|
|
|||
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI 2020.11.12.kin.139396658"
|
||||
signature = "rusEFI 2020.11.14.kin.1816588204"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmwave version for title bar.
|
||||
signature = "rusEFI 2020.11.12.kin.139396658" ; signature is expected to be 7 or more characters.
|
||||
signature = "rusEFI 2020.11.14.kin.1816588204" ; signature is expected to be 7 or more characters.
|
||||
|
||||
[Constants]
|
||||
; new packet serial format with CRC
|
||||
|
|
@ -74,7 +74,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Thu Nov 12 02:49:03 UTC 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Sat Nov 14 23:07:43 UTC 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -1268,6 +1268,8 @@ page = 1
|
|||
cj125isUrDivided = "Is your UR CJ125 output wired to MCU via resistor divider?\nLooks like 3v range should be enough, divider generally not needed."
|
||||
useCicPidForIdle = "Switch between Industrial and Cic PID implementation"
|
||||
absoluteFuelPressure = "If your fuel regulator does not have vacuum line"
|
||||
tpsMin = "Closed throttle, 1 volt = 200 units.\nSee also tps1_1AdcChannel\nset tps_min X"
|
||||
tpsMax = "Full throttle.\nSee also tps1_1AdcChannel\nset tps_max X"
|
||||
tpsErrorDetectionTooLow = "TPS error detection: what throttle % is unrealistically low?\nAlso used for accelerator pedal error detection if so equiped."
|
||||
tpsErrorDetectionTooHigh = "TPS error detection: what throttle % is unrealistically high?\nAlso used for accelerator pedal error detection if so equiped."
|
||||
cranking_baseFuel = "Base mass of the per-cylinder fuel injected during cranking. This is then modified by the multipliers for CLT, IAT, TPS ect, to give the final cranking pulse width.\nA reasonable starting point is 60mg per liter per cylinder.\nex: 2 liter 4 cyl = 500cc/cyl, so 30mg cranking fuel."
|
||||
|
|
@ -1308,6 +1310,12 @@ page = 1
|
|||
malfunctionIndicatorPin = "Check engine light, also malfunction indicator light. Always blinks once on boot."
|
||||
idle_antiwindupFreq = "0.1 is a good default value"
|
||||
acIdleExtraOffset = "Additional idle PID offset while A/C is active"
|
||||
can2SleepPeriodMs = "CANbus thread period, ms"
|
||||
wastegatePositionMin = "Voltage when the wastegate is closed.\nYou probably don't have one of these!"
|
||||
wastegatePositionMax = "Voltage when the wastegate is fully open.\nYou probably don't have one of these!\n1 volt = 1000 units"
|
||||
idlePositionMin = "Voltage when the idle valve is closed.\nYou probably don't have one of these!"
|
||||
idlePositionMax = "Voltage when the idle valve is open.\nYou probably don't have one of these!\n1 volt = 1000 units"
|
||||
tunerStudioSerialSpeed = "Secondary TTL channel baud rate"
|
||||
compressionRatio = "Just for reference really, not taken into account by any logic at this point"
|
||||
useStepperIdle = "This setting should only be used if you have a stepper motor idle valve and a stepper motor driver installed."
|
||||
enableVerboseCanTx = "CAN broadcast using custom rusEFI protocol\nenable can_broadcast/disable can_broadcast"
|
||||
|
|
|
|||
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI 2020.11.12.mre_f4.4169740901"
|
||||
signature = "rusEFI 2020.11.14.mre_f4.2625690619"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmwave version for title bar.
|
||||
signature = "rusEFI 2020.11.12.mre_f4.4169740901" ; signature is expected to be 7 or more characters.
|
||||
signature = "rusEFI 2020.11.14.mre_f4.2625690619" ; signature is expected to be 7 or more characters.
|
||||
|
||||
[Constants]
|
||||
; new packet serial format with CRC
|
||||
|
|
@ -74,7 +74,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 12 02:48:54 UTC 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Nov 14 23:07:30 UTC 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -1268,6 +1268,8 @@ page = 1
|
|||
cj125isUrDivided = "Is your UR CJ125 output wired to MCU via resistor divider?\nLooks like 3v range should be enough, divider generally not needed."
|
||||
useCicPidForIdle = "Switch between Industrial and Cic PID implementation"
|
||||
absoluteFuelPressure = "If your fuel regulator does not have vacuum line"
|
||||
tpsMin = "Closed throttle, 1 volt = 200 units.\nSee also tps1_1AdcChannel\nset tps_min X"
|
||||
tpsMax = "Full throttle.\nSee also tps1_1AdcChannel\nset tps_max X"
|
||||
tpsErrorDetectionTooLow = "TPS error detection: what throttle % is unrealistically low?\nAlso used for accelerator pedal error detection if so equiped."
|
||||
tpsErrorDetectionTooHigh = "TPS error detection: what throttle % is unrealistically high?\nAlso used for accelerator pedal error detection if so equiped."
|
||||
cranking_baseFuel = "Base mass of the per-cylinder fuel injected during cranking. This is then modified by the multipliers for CLT, IAT, TPS ect, to give the final cranking pulse width.\nA reasonable starting point is 60mg per liter per cylinder.\nex: 2 liter 4 cyl = 500cc/cyl, so 30mg cranking fuel."
|
||||
|
|
@ -1308,6 +1310,12 @@ page = 1
|
|||
malfunctionIndicatorPin = "Check engine light, also malfunction indicator light. Always blinks once on boot."
|
||||
idle_antiwindupFreq = "0.1 is a good default value"
|
||||
acIdleExtraOffset = "Additional idle PID offset while A/C is active"
|
||||
can2SleepPeriodMs = "CANbus thread period, ms"
|
||||
wastegatePositionMin = "Voltage when the wastegate is closed.\nYou probably don't have one of these!"
|
||||
wastegatePositionMax = "Voltage when the wastegate is fully open.\nYou probably don't have one of these!\n1 volt = 1000 units"
|
||||
idlePositionMin = "Voltage when the idle valve is closed.\nYou probably don't have one of these!"
|
||||
idlePositionMax = "Voltage when the idle valve is open.\nYou probably don't have one of these!\n1 volt = 1000 units"
|
||||
tunerStudioSerialSpeed = "Secondary TTL channel baud rate"
|
||||
compressionRatio = "Just for reference really, not taken into account by any logic at this point"
|
||||
useStepperIdle = "This setting should only be used if you have a stepper motor idle valve and a stepper motor driver installed."
|
||||
enableVerboseCanTx = "CAN broadcast using custom rusEFI protocol\nenable can_broadcast/disable can_broadcast"
|
||||
|
|
|
|||
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI 2020.11.12.mre_f7.4169740901"
|
||||
signature = "rusEFI 2020.11.14.mre_f7.2625690619"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmwave version for title bar.
|
||||
signature = "rusEFI 2020.11.12.mre_f7.4169740901" ; signature is expected to be 7 or more characters.
|
||||
signature = "rusEFI 2020.11.14.mre_f7.2625690619" ; signature is expected to be 7 or more characters.
|
||||
|
||||
[Constants]
|
||||
; new packet serial format with CRC
|
||||
|
|
@ -74,7 +74,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 12 02:48:52 UTC 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Nov 14 23:07:28 UTC 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -1268,6 +1268,8 @@ page = 1
|
|||
cj125isUrDivided = "Is your UR CJ125 output wired to MCU via resistor divider?\nLooks like 3v range should be enough, divider generally not needed."
|
||||
useCicPidForIdle = "Switch between Industrial and Cic PID implementation"
|
||||
absoluteFuelPressure = "If your fuel regulator does not have vacuum line"
|
||||
tpsMin = "Closed throttle, 1 volt = 200 units.\nSee also tps1_1AdcChannel\nset tps_min X"
|
||||
tpsMax = "Full throttle.\nSee also tps1_1AdcChannel\nset tps_max X"
|
||||
tpsErrorDetectionTooLow = "TPS error detection: what throttle % is unrealistically low?\nAlso used for accelerator pedal error detection if so equiped."
|
||||
tpsErrorDetectionTooHigh = "TPS error detection: what throttle % is unrealistically high?\nAlso used for accelerator pedal error detection if so equiped."
|
||||
cranking_baseFuel = "Base mass of the per-cylinder fuel injected during cranking. This is then modified by the multipliers for CLT, IAT, TPS ect, to give the final cranking pulse width.\nA reasonable starting point is 60mg per liter per cylinder.\nex: 2 liter 4 cyl = 500cc/cyl, so 30mg cranking fuel."
|
||||
|
|
@ -1308,6 +1310,12 @@ page = 1
|
|||
malfunctionIndicatorPin = "Check engine light, also malfunction indicator light. Always blinks once on boot."
|
||||
idle_antiwindupFreq = "0.1 is a good default value"
|
||||
acIdleExtraOffset = "Additional idle PID offset while A/C is active"
|
||||
can2SleepPeriodMs = "CANbus thread period, ms"
|
||||
wastegatePositionMin = "Voltage when the wastegate is closed.\nYou probably don't have one of these!"
|
||||
wastegatePositionMax = "Voltage when the wastegate is fully open.\nYou probably don't have one of these!\n1 volt = 1000 units"
|
||||
idlePositionMin = "Voltage when the idle valve is closed.\nYou probably don't have one of these!"
|
||||
idlePositionMax = "Voltage when the idle valve is open.\nYou probably don't have one of these!\n1 volt = 1000 units"
|
||||
tunerStudioSerialSpeed = "Secondary TTL channel baud rate"
|
||||
compressionRatio = "Just for reference really, not taken into account by any logic at this point"
|
||||
useStepperIdle = "This setting should only be used if you have a stepper motor idle valve and a stepper motor driver installed."
|
||||
enableVerboseCanTx = "CAN broadcast using custom rusEFI protocol\nenable can_broadcast/disable can_broadcast"
|
||||
|
|
|
|||
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI 2020.11.12.prometheus_405.3531250778"
|
||||
signature = "rusEFI 2020.11.14.prometheus_405.3061020100"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmwave version for title bar.
|
||||
signature = "rusEFI 2020.11.12.prometheus_405.3531250778" ; signature is expected to be 7 or more characters.
|
||||
signature = "rusEFI 2020.11.14.prometheus_405.3061020100" ; signature is expected to be 7 or more characters.
|
||||
|
||||
[Constants]
|
||||
; new packet serial format with CRC
|
||||
|
|
@ -74,7 +74,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 12 02:48:59 UTC 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Nov 14 23:07:36 UTC 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -1268,6 +1268,8 @@ page = 1
|
|||
cj125isUrDivided = "Is your UR CJ125 output wired to MCU via resistor divider?\nLooks like 3v range should be enough, divider generally not needed."
|
||||
useCicPidForIdle = "Switch between Industrial and Cic PID implementation"
|
||||
absoluteFuelPressure = "If your fuel regulator does not have vacuum line"
|
||||
tpsMin = "Closed throttle, 1 volt = 200 units.\nSee also tps1_1AdcChannel\nset tps_min X"
|
||||
tpsMax = "Full throttle.\nSee also tps1_1AdcChannel\nset tps_max X"
|
||||
tpsErrorDetectionTooLow = "TPS error detection: what throttle % is unrealistically low?\nAlso used for accelerator pedal error detection if so equiped."
|
||||
tpsErrorDetectionTooHigh = "TPS error detection: what throttle % is unrealistically high?\nAlso used for accelerator pedal error detection if so equiped."
|
||||
cranking_baseFuel = "Base mass of the per-cylinder fuel injected during cranking. This is then modified by the multipliers for CLT, IAT, TPS ect, to give the final cranking pulse width.\nA reasonable starting point is 60mg per liter per cylinder.\nex: 2 liter 4 cyl = 500cc/cyl, so 30mg cranking fuel."
|
||||
|
|
@ -1308,6 +1310,12 @@ page = 1
|
|||
malfunctionIndicatorPin = "Check engine light, also malfunction indicator light. Always blinks once on boot."
|
||||
idle_antiwindupFreq = "0.1 is a good default value"
|
||||
acIdleExtraOffset = "Additional idle PID offset while A/C is active"
|
||||
can2SleepPeriodMs = "CANbus thread period, ms"
|
||||
wastegatePositionMin = "Voltage when the wastegate is closed.\nYou probably don't have one of these!"
|
||||
wastegatePositionMax = "Voltage when the wastegate is fully open.\nYou probably don't have one of these!\n1 volt = 1000 units"
|
||||
idlePositionMin = "Voltage when the idle valve is closed.\nYou probably don't have one of these!"
|
||||
idlePositionMax = "Voltage when the idle valve is open.\nYou probably don't have one of these!\n1 volt = 1000 units"
|
||||
tunerStudioSerialSpeed = "Secondary TTL channel baud rate"
|
||||
compressionRatio = "Just for reference really, not taken into account by any logic at this point"
|
||||
useStepperIdle = "This setting should only be used if you have a stepper motor idle valve and a stepper motor driver installed."
|
||||
enableVerboseCanTx = "CAN broadcast using custom rusEFI protocol\nenable can_broadcast/disable can_broadcast"
|
||||
|
|
|
|||
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI 2020.11.12.prometheus_469.3531250778"
|
||||
signature = "rusEFI 2020.11.14.prometheus_469.3061020100"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmwave version for title bar.
|
||||
signature = "rusEFI 2020.11.12.prometheus_469.3531250778" ; signature is expected to be 7 or more characters.
|
||||
signature = "rusEFI 2020.11.14.prometheus_469.3061020100" ; signature is expected to be 7 or more characters.
|
||||
|
||||
[Constants]
|
||||
; new packet serial format with CRC
|
||||
|
|
@ -74,7 +74,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 12 02:48:57 UTC 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Nov 14 23:07:33 UTC 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -1268,6 +1268,8 @@ page = 1
|
|||
cj125isUrDivided = "Is your UR CJ125 output wired to MCU via resistor divider?\nLooks like 3v range should be enough, divider generally not needed."
|
||||
useCicPidForIdle = "Switch between Industrial and Cic PID implementation"
|
||||
absoluteFuelPressure = "If your fuel regulator does not have vacuum line"
|
||||
tpsMin = "Closed throttle, 1 volt = 200 units.\nSee also tps1_1AdcChannel\nset tps_min X"
|
||||
tpsMax = "Full throttle.\nSee also tps1_1AdcChannel\nset tps_max X"
|
||||
tpsErrorDetectionTooLow = "TPS error detection: what throttle % is unrealistically low?\nAlso used for accelerator pedal error detection if so equiped."
|
||||
tpsErrorDetectionTooHigh = "TPS error detection: what throttle % is unrealistically high?\nAlso used for accelerator pedal error detection if so equiped."
|
||||
cranking_baseFuel = "Base mass of the per-cylinder fuel injected during cranking. This is then modified by the multipliers for CLT, IAT, TPS ect, to give the final cranking pulse width.\nA reasonable starting point is 60mg per liter per cylinder.\nex: 2 liter 4 cyl = 500cc/cyl, so 30mg cranking fuel."
|
||||
|
|
@ -1308,6 +1310,12 @@ page = 1
|
|||
malfunctionIndicatorPin = "Check engine light, also malfunction indicator light. Always blinks once on boot."
|
||||
idle_antiwindupFreq = "0.1 is a good default value"
|
||||
acIdleExtraOffset = "Additional idle PID offset while A/C is active"
|
||||
can2SleepPeriodMs = "CANbus thread period, ms"
|
||||
wastegatePositionMin = "Voltage when the wastegate is closed.\nYou probably don't have one of these!"
|
||||
wastegatePositionMax = "Voltage when the wastegate is fully open.\nYou probably don't have one of these!\n1 volt = 1000 units"
|
||||
idlePositionMin = "Voltage when the idle valve is closed.\nYou probably don't have one of these!"
|
||||
idlePositionMax = "Voltage when the idle valve is open.\nYou probably don't have one of these!\n1 volt = 1000 units"
|
||||
tunerStudioSerialSpeed = "Secondary TTL channel baud rate"
|
||||
compressionRatio = "Just for reference really, not taken into account by any logic at this point"
|
||||
useStepperIdle = "This setting should only be used if you have a stepper motor idle valve and a stepper motor driver installed."
|
||||
enableVerboseCanTx = "CAN broadcast using custom rusEFI protocol\nenable can_broadcast/disable can_broadcast"
|
||||
|
|
|
|||
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI 2020.11.12.proteus_f4.1493749973"
|
||||
signature = "rusEFI 2020.11.14.proteus_f4.1023490379"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmwave version for title bar.
|
||||
signature = "rusEFI 2020.11.12.proteus_f4.1493749973" ; signature is expected to be 7 or more characters.
|
||||
signature = "rusEFI 2020.11.14.proteus_f4.1023490379" ; signature is expected to be 7 or more characters.
|
||||
|
||||
[Constants]
|
||||
; new packet serial format with CRC
|
||||
|
|
@ -74,7 +74,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 12 02:49:02 UTC 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Nov 14 23:07:42 UTC 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -1268,6 +1268,8 @@ page = 1
|
|||
cj125isUrDivided = "Is your UR CJ125 output wired to MCU via resistor divider?\nLooks like 3v range should be enough, divider generally not needed."
|
||||
useCicPidForIdle = "Switch between Industrial and Cic PID implementation"
|
||||
absoluteFuelPressure = "If your fuel regulator does not have vacuum line"
|
||||
tpsMin = "Closed throttle, 1 volt = 200 units.\nSee also tps1_1AdcChannel\nset tps_min X"
|
||||
tpsMax = "Full throttle.\nSee also tps1_1AdcChannel\nset tps_max X"
|
||||
tpsErrorDetectionTooLow = "TPS error detection: what throttle % is unrealistically low?\nAlso used for accelerator pedal error detection if so equiped."
|
||||
tpsErrorDetectionTooHigh = "TPS error detection: what throttle % is unrealistically high?\nAlso used for accelerator pedal error detection if so equiped."
|
||||
cranking_baseFuel = "Base mass of the per-cylinder fuel injected during cranking. This is then modified by the multipliers for CLT, IAT, TPS ect, to give the final cranking pulse width.\nA reasonable starting point is 60mg per liter per cylinder.\nex: 2 liter 4 cyl = 500cc/cyl, so 30mg cranking fuel."
|
||||
|
|
@ -1308,6 +1310,12 @@ page = 1
|
|||
malfunctionIndicatorPin = "Check engine light, also malfunction indicator light. Always blinks once on boot."
|
||||
idle_antiwindupFreq = "0.1 is a good default value"
|
||||
acIdleExtraOffset = "Additional idle PID offset while A/C is active"
|
||||
can2SleepPeriodMs = "CANbus thread period, ms"
|
||||
wastegatePositionMin = "Voltage when the wastegate is closed.\nYou probably don't have one of these!"
|
||||
wastegatePositionMax = "Voltage when the wastegate is fully open.\nYou probably don't have one of these!\n1 volt = 1000 units"
|
||||
idlePositionMin = "Voltage when the idle valve is closed.\nYou probably don't have one of these!"
|
||||
idlePositionMax = "Voltage when the idle valve is open.\nYou probably don't have one of these!\n1 volt = 1000 units"
|
||||
tunerStudioSerialSpeed = "Secondary TTL channel baud rate"
|
||||
compressionRatio = "Just for reference really, not taken into account by any logic at this point"
|
||||
useStepperIdle = "This setting should only be used if you have a stepper motor idle valve and a stepper motor driver installed."
|
||||
enableVerboseCanTx = "CAN broadcast using custom rusEFI protocol\nenable can_broadcast/disable can_broadcast"
|
||||
|
|
|
|||
|
|
@ -33,12 +33,12 @@ enable2ndByteCanID = false
|
|||
|
||||
[MegaTune]
|
||||
; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
|
||||
signature = "rusEFI 2020.11.12.proteus_f7.1493749973"
|
||||
signature = "rusEFI 2020.11.14.proteus_f7.1023490379"
|
||||
|
||||
[TunerStudio]
|
||||
queryCommand = "S"
|
||||
versionInfo = "V" ; firmwave version for title bar.
|
||||
signature = "rusEFI 2020.11.12.proteus_f7.1493749973" ; signature is expected to be 7 or more characters.
|
||||
signature = "rusEFI 2020.11.14.proteus_f7.1023490379" ; signature is expected to be 7 or more characters.
|
||||
|
||||
[Constants]
|
||||
; new packet serial format with CRC
|
||||
|
|
@ -74,7 +74,7 @@ enable2ndByteCanID = false
|
|||
|
||||
; see PAGE_0_SIZE in C source code
|
||||
; CONFIG_DEFINITION_START
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Thu Nov 12 02:49:00 UTC 2020
|
||||
; this section was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Nov 14 23:07:39 UTC 2020
|
||||
|
||||
pageSize = 20000
|
||||
page = 1
|
||||
|
|
@ -1268,6 +1268,8 @@ page = 1
|
|||
cj125isUrDivided = "Is your UR CJ125 output wired to MCU via resistor divider?\nLooks like 3v range should be enough, divider generally not needed."
|
||||
useCicPidForIdle = "Switch between Industrial and Cic PID implementation"
|
||||
absoluteFuelPressure = "If your fuel regulator does not have vacuum line"
|
||||
tpsMin = "Closed throttle, 1 volt = 200 units.\nSee also tps1_1AdcChannel\nset tps_min X"
|
||||
tpsMax = "Full throttle.\nSee also tps1_1AdcChannel\nset tps_max X"
|
||||
tpsErrorDetectionTooLow = "TPS error detection: what throttle % is unrealistically low?\nAlso used for accelerator pedal error detection if so equiped."
|
||||
tpsErrorDetectionTooHigh = "TPS error detection: what throttle % is unrealistically high?\nAlso used for accelerator pedal error detection if so equiped."
|
||||
cranking_baseFuel = "Base mass of the per-cylinder fuel injected during cranking. This is then modified by the multipliers for CLT, IAT, TPS ect, to give the final cranking pulse width.\nA reasonable starting point is 60mg per liter per cylinder.\nex: 2 liter 4 cyl = 500cc/cyl, so 30mg cranking fuel."
|
||||
|
|
@ -1308,6 +1310,12 @@ page = 1
|
|||
malfunctionIndicatorPin = "Check engine light, also malfunction indicator light. Always blinks once on boot."
|
||||
idle_antiwindupFreq = "0.1 is a good default value"
|
||||
acIdleExtraOffset = "Additional idle PID offset while A/C is active"
|
||||
can2SleepPeriodMs = "CANbus thread period, ms"
|
||||
wastegatePositionMin = "Voltage when the wastegate is closed.\nYou probably don't have one of these!"
|
||||
wastegatePositionMax = "Voltage when the wastegate is fully open.\nYou probably don't have one of these!\n1 volt = 1000 units"
|
||||
idlePositionMin = "Voltage when the idle valve is closed.\nYou probably don't have one of these!"
|
||||
idlePositionMax = "Voltage when the idle valve is open.\nYou probably don't have one of these!\n1 volt = 1000 units"
|
||||
tunerStudioSerialSpeed = "Secondary TTL channel baud rate"
|
||||
compressionRatio = "Just for reference really, not taken into account by any logic at this point"
|
||||
useStepperIdle = "This setting should only be used if you have a stepper motor idle valve and a stepper motor driver installed."
|
||||
enableVerboseCanTx = "CAN broadcast using custom rusEFI protocol\nenable can_broadcast/disable can_broadcast"
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
package com.rusefi.config.generated;
|
||||
|
||||
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Nov 11 04:12:24 UTC 2020
|
||||
// this file was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Sat Nov 14 23:07:26 UTC 2020
|
||||
|
||||
// by class com.rusefi.output.FileJavaFieldsConsumer
|
||||
import com.rusefi.config.*;
|
||||
|
|
@ -1435,7 +1435,7 @@ public class Fields {
|
|||
public static final char TS_SD_R_COMMAND = 'r';
|
||||
public static final char TS_SD_W_COMMAND = 'w';
|
||||
public static final char TS_SET_LOGGER_SWITCH = 'l';
|
||||
public static final String TS_SIGNATURE = "rusEFI 2020.11.11.all.3139213859";
|
||||
public static final String TS_SIGNATURE = "rusEFI 2020.11.14.all.4104876949";
|
||||
public static final char TS_SINGLE_WRITE_COMMAND = 'W';
|
||||
public static final int TT_TT_60_2_VW = 20;
|
||||
public static final int TT_TT_ONE = 18;
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
<roms>
|
||||
|
||||
<!-- was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh Wed Nov 11 04:12:25 UTC 2020 -->
|
||||
<!-- was generated automatically by rusEfi tool ConfigDefinition.jar based on gen_config.sh Sat Nov 14 23:07:27 UTC 2020 -->
|
||||
|
||||
<rom>
|
||||
<romid>
|
||||
|
|
|
|||
Loading…
Reference in New Issue