min gap tracking override length is actually 1
This commit is contained in:
parent
d0767f0e34
commit
1b02c8e1b0
|
@ -541,7 +541,7 @@ angle_t crankingTimingAngle;Ignition advance angle used during engine cranking,
|
|||
custom ignition_mode_e 1 bits, U08, @OFFSET@, [0:1], "Single Coil", "Individual Coils", "Wasted Spark", "Two Distributors"
|
||||
ignition_mode_e ignitionMode;Single coil = distributor\nIndividual coils = one coil per cylinder (COP, coil-near-plug), requires sequential mode\nWasted spark = Fires pairs of cylinders together, either one coil per pair of cylinders or one coil per cylinder\nTwo distributors = A pair of distributors, found on some BMW, Toyota and other engines\nset ignition_mode X
|
||||
|
||||
int8_t gapTrackingLengthOverride;How many consecutive gap rations have to match expected ranges for sync to happen;"count", 1, 0, 0, @@GAP_TRACKING_LENGTH@@, 0
|
||||
int8_t gapTrackingLengthOverride;How many consecutive gap rations have to match expected ranges for sync to happen;"count", 1, 0, 1, @@GAP_TRACKING_LENGTH@@, 0
|
||||
uint8_t maxIdleVss;Above this speed, disable closed loop idle control. Set to 0 to disable (allow closed loop idle at any speed).;"kph", 1, 0, 0, 100, 0
|
||||
uint16_t minOilPressureAfterStart;Expected oil pressure after starting the engine. If oil pressure does not reach this level within 5 seconds of engine start, fuel will be cut. Set to 0 to disable and always allow starting.;"kPa", 1, 0, 0, 1000, 0
|
||||
|
||||
|
|
Loading…
Reference in New Issue