andreika-git
/
rusefi
mirror of https://github.com/andreika-git/rusefi.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

auto-sync

This commit is contained in:
rusEfi 2014-12-19 19:03:44 -06:00
parent af5249b8fc
commit 1db344745b
1 changed files with 9 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
hardware/frankenso/known_issues.txt
View File

@ -28,10 +28,10 @@
28) RESOLVED IN R0.2 better silkscreen for P602 & P604 - explicit "5v" "12v" "GND"
29) RESOLVED IN R0.2 Add LED indicators to injector channels.
30) RESOLVED IN R0.3 3D for C1001 bulk cap has black mark on wrong side
31) RESOLVED IN R0.3 R0.3 We've moved the upper mounting hole too far - we need to move it half way back http://rusefi.com/forum/viewtopic.php?f=4&t=735#p12500
32) RESOLVED IN R0.3 R0.3 C1001 should be 1mm lower to improve clearance with the case
32) R0.3 Q411 should be 1.5mm lower to improve clearance with the case
33) R0.3 Q412 should be moved 3mm to the left, this would probably affect W63 which would affect the whole corner. Maybe move Q412 to the back of the board?
31) RESOLVED IN R0.3 We've moved the upper mounting hole too far - we need to move it half way back http://rusefi.com/forum/viewtopic.php?f=4&t=735#p12500
32) RESOLVED IN R0.3 C1001 should be 1mm lower to improve clearance with the case
32) Q411 should be 1.5mm lower to improve clearance with the case (See 47)
33) Q412 should be moved 3mm to the left, this would probably affect W63 which would affect the whole corner. Maybe move Q412 to the back of the board? (See 47)
34) RESOLVED IN R0.3 R0.3 rename the recently added low-side diodes and LEDs/resistors into 400 range
35) RESOLVED IN R0.3 test pads explicit silkscreen
36) RESOLVED IN R0.3 test pads on the back of the board
@ -45,7 +45,11 @@
44) RESOLVED IN R0.3 Move 12V injector flyback diodes to other side of W2
45) RESOLVED IN R0.3 Short out D10.
46) RESOLVED IN R0.3 add vias around ST processor. Orginal board design was a 2 layer, not it's 4 layer. It's better design practice to have GND via's closer to the GND pins.
47) HIP9011 CS line needs to be pulled down, not pulled up
47) Per 32) and 33) change W64,63 change to single hole, which allows U chips to move away from enclosre metal wall
48) Make hidden text for component values align such that a picture can be caputured that displays the component values.
49) check VR against 1996 Miata's.
50) HIP9011 CS line needs to be pulled down, not pulled up
51) CAN_RX line should be connected to PB12, not PD12
For honda add-on / rewiring board
-- Add 2A high side solinoid drive for VTec sol