112-17

firmware/config/boards/hellen/hellen-112-17/board.mk

@@ -0,0 +1,22 @@
+# Combine the related files for a specific platform and MCU.
+
+# Target ECU board design
+BOARDCPPSRC = $(BOARD_DIR)/board_configuration.cpp
+# Set this if you want a default engine type other than normal
+ifeq ($(VAR_DEF_ENGINE_TYPE),)
+#  VAR_DEF_ENGINE_TYPE = -DDEFAULT_ENGINE_TYPE=engine_type_e::HELLEN_154_HYUNDAI_COUPE_BK2
+endif
+
+DDEFS += -DEFI_MAIN_RELAY_CONTROL=TRUE
+
+#DDEFS += -DADC_MUX_PIN=Gpio::F2
+
+# Add them all together
+DDEFS += -DFIRMWARE_ID=\"hellen-112-17\" $(VAR_DEF_ENGINE_TYPE)
+#DDEFS += -DEFI_SOFTWARE_KNOCK=TRUE -DSTM32_ADC_USE_ADC3=TRUE
+
+DDEFS += -DSHORT_BOARD_NAME=hellen-112-17
+DDEFS += -DHW_HELLEN_K=TRUE
+
+include $(BOARDS_DIR)/hellen/hellen-common144.mk
+DDEFS += -DHW_HELLEN_HONDA=1

firmware/config/boards/hellen/hellen-112-17/board_configuration.cpp

@@ -0,0 +1,187 @@
+/**
+ * @file boards/hellen/hellen-honda-k/board_configuration.cpp
+ *
+ * See https://rusefi.com/s/XX
+ *
+ * @author Andrey Belomutskiy, (c) 2012-2023
+ */
+
+#include "pch.h"
+#include "defaults.h"
+#include "hellen_meta.h"
+#include "honda_k_dbc.h"
+
+static void setInjectorPins() {
+	engineConfiguration->injectionPins[0] = Gpio::H144_LS_1;
+	engineConfiguration->injectionPins[1] = Gpio::H144_LS_2;
+	engineConfiguration->injectionPins[2] = Gpio::H144_LS_3;
+	engineConfiguration->injectionPins[3] = Gpio::H144_LS_4;
+}
+
+static void setIgnitionPins() {
+	engineConfiguration->ignitionPins[0] = Gpio::H144_IGN_1;
+	engineConfiguration->ignitionPins[1] = Gpio::H144_IGN_2;
+	engineConfiguration->ignitionPins[2] = Gpio::H144_IGN_3;
+	engineConfiguration->ignitionPins[3] = Gpio::H144_IGN_4;
+}
+
+static void setupVbatt() {
+	// 4.7k high side/4.7k low side = 2.0 ratio divider
+	engineConfiguration->analogInputDividerCoefficient = 2.0f;
+
+	// set vbatt_divider 5.835
+	// 33k / 6.8k
+	engineConfiguration->vbattDividerCoeff = (33 + 6.8) / 6.8; // 5.835
+
+	// pin input +12 from Main Relay
+	engineConfiguration->vbattAdcChannel = EFI_ADC_5; // 4T
+
+	engineConfiguration->adcVcc = 3.29f;
+}
+
+static void setupDefaultSensorInputs() {
+    engineConfiguration->vehicleSpeedSensorInputPin = Gpio::H144_IN_VSS;
+
+	engineConfiguration->tps1_1AdcChannel = H144_IN_TPS;
+
+	engineConfiguration->mafAdcChannel = EFI_ADC_NONE;
+	engineConfiguration->map.sensor.hwChannel = H144_IN_MAP1;
+
+	engineConfiguration->afr.hwChannel = EFI_ADC_NONE;
+
+	engineConfiguration->clt.adcChannel = H144_IN_CLT;
+
+	engineConfiguration->iat.adcChannel = H144_IN_IAT;
+}
+
+void onBoardStandBy() {
+    efiPrintf("K: onBoardStandBy");
+    hellenBoardStandBy();
+}
+
+#include "hellen_leds_144.cpp"
+
+void setBoardConfigOverrides() {
+	setHellenMegaEnPin();
+	setupVbatt();
+
+	setHellenSdCardSpi1();
+	configureHellenMegaAccCS2Pin();
+	configureHellenCanTerminator();
+
+	engineConfiguration->clt.config.bias_resistor = 4700;
+	engineConfiguration->iat.config.bias_resistor = 4700;
+
+	engineConfiguration->triggerInputPins[0] = Gpio::H144_IN_RES1;
+	engineConfiguration->camInputs[0] = Gpio::H144_IN_RES3;
+	// ex or in?
+	engineConfiguration->camInputs[1] = Gpio::H144_IN_RES2;
+
+
+//    //ETB1
+//    // PWM pin
+//    engineConfiguration->etbIo[0].controlPin = Gpio::H144_OUT_PWM2;
+//    // DIR pin
+//	engineConfiguration->etbIo[0].directionPin1 = Gpio::H144_OUT_PWM3;
+//   	// Disable pin
+//   	engineConfiguration->etbIo[0].disablePin = Gpio::H144_OUT_IO12;
+//   	// Unused
+// 	engineConfiguration->etbIo[0].directionPin2 = Gpio::Unassigned;
+
+}
+
+/**
+ * @brief   Board-specific configuration defaults.
+ *
+ * See also setDefaultEngineConfiguration
+ *
+ * @todo    Add your board-specific code, if any.
+ */
+void setBoardDefaultConfiguration() {
+	setInjectorPins();
+	setIgnitionPins();
+	setHondaK();
+
+    // not override since sometimes we have isues?
+	setHellenMMbaro();
+
+	engineConfiguration->displayLogicLevelsInEngineSniffer = true;
+
+	engineConfiguration->globalTriggerAngleOffset = 663;
+
+	engineConfiguration->enableSoftwareKnock = true;
+
+	engineConfiguration->canTxPin = H176_CAN_TX;
+	engineConfiguration->canRxPin = H176_CAN_RX;
+
+    engineConfiguration->vvtPins[0] = Gpio::H144_OUT_PWM4;
+
+    gppwm_channel *vtsControl = &engineConfiguration->gppwm[0];
+    // vtsControl->pin = Gpio::H144_OUT_IO6;
+
+	engineConfiguration->fuelPumpPin = Gpio::H144_OUT_IO13;;
+	engineConfiguration->idle.solenoidPin = Gpio::H144_LS_6;
+	engineConfiguration->fanPin = Gpio::H144_OUT_IO12;
+	engineConfiguration->mainRelayPin = Gpio::H144_OUT_IO3;
+	engineConfiguration->malfunctionIndicatorPin = Gpio::H144_OUT_IO7;
+
+	// how come this is not denso 183?!
+	engineConfiguration->map.sensor.type = MT_CUSTOM;
+	engineConfiguration->map.sensor.lowValue = 11.4;
+	engineConfiguration->mapLowValueVoltage = 0.5;
+	engineConfiguration->map.sensor.highValue = 170.7;
+	engineConfiguration->mapHighValueVoltage = 4.8;
+
+    engineConfiguration->enableKline = true;
+    engineConfiguration->kLineBaudRate = 9600;
+	engineConfiguration->hondaK = true;
+	engineConfiguration->verboseKLine = true;
+
+	engineConfiguration->brakePedalPin = Gpio::H144_IN_CAM;
+	engineConfiguration->acRelayPin = Gpio::H144_LS_5;
+    engineConfiguration->tachOutputPin = Gpio::H144_OUT_IO10;
+    // A/C switch on k-line
+
+	// "required" hardware is done - set some reasonable defaults
+	setupDefaultSensorInputs();
+	engineConfiguration->enableVerboseCanTx = true;
+
+	engineConfiguration->etbFunctions[0] = DC_None;
+	engineConfiguration->etbFunctions[1] = DC_Wastegate;
+
+	// Some sensible defaults for other options
+	setCrankOperationMode();
+
+	setAlgorithm(LM_SPEED_DENSITY);
+
+	engineConfiguration->injectorCompensationMode = ICM_FixedRailPressure;
+
+	setCommonNTCSensor(&engineConfiguration->clt, HELLEN_DEFAULT_AT_PULLUP);
+	setCommonNTCSensor(&engineConfiguration->iat, HELLEN_DEFAULT_AT_PULLUP);
+
+    setTPS1Calibration(100, 650);
+	hellenWbo();
+}
+
+static Gpio OUTPUTS[] = {
+		Gpio::H144_LS_1, // 1 inj 1
+		Gpio::H144_LS_2,
+		Gpio::H144_LS_3,
+		Gpio::H144_LS_4, // 4
+	Gpio::H144_LS_5, // 5 A/C relay
+	Gpio::H144_LS_6, // 6 idle air
+	Gpio::H144_LS_7, // 7 intake runner
+	Gpio::H144_LS_8, // 8 Lockout Solenoid
+	Gpio::H144_OUT_IO12, // 9 Radiator Relay Output
+	Gpio::H144_OUT_PWM6, // 10 B21 EVAP
+	Gpio::H144_OUT_PWM5, // 11 B23 VTC VVT
+	Gpio::H144_OUT_IO3, // E7 12 main relay
+};
+
+int getBoardMetaOutputsCount() {
+    return efi::size(OUTPUTS);
+}
+
+Gpio* getBoardMetaOutputs() {
+    return OUTPUTS;
+}

firmware/config/boards/hellen/hellen-112-17/compile_hellen-hellen-112-17.sh

@@ -0,0 +1,4 @@
+#!/bin/bash
+
+cd ..
+bash ../common_make.sh hellen/hellen-112-17 ARCH_STM32F4

firmware/config/boards/hellen/hellen-112-17/knock_config.h

@@ -0,0 +1 @@
+#include "../hellen_knock_config.h"