andreika-git
/
rusefi
mirror of https://github.com/andreika-git/rusefi.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

hellen_board_id + hellen-common.mk (#3885) 

* Hellen_board_id

* move EXTI init before config load

* add NT2USF()

* Hellen_board_id unit-tests

* hellen-common.mk

* fix for older macos compiler
This commit is contained in:
Andreika 2022-02-03 18:24:31 +02:00 committed by GitHub
parent ad271ea8cc
commit 2beca221a3
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
22 changed files with 580 additions and 105 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
firmware/config/boards/hellen/alphax-2chan/board.mk
View File

@ -1,8 +1,7 @@
# Combine the related files for a specific platform and MCU. # Combine the related files for a specific platform and MCU.
# Target ECU board design # Target ECU board design
BOARDCPPSRC = $(BOARDS_DIR)/hellen/alphax-2chan/board_configuration.cpp \ BOARDCPPSRC = $(BOARDS_DIR)/hellen/alphax-2chan/board_configuration.cpp
$(BOARDS_DIR)/hellen/hellen_common.cpp
BOARDINC = $(BOARDS_DIR)/hellen/alphax-2chan BOARDINC = $(BOARDS_DIR)/hellen/alphax-2chan
# Set this if you want a default engine type other than normal alphax-2chan # Set this if you want a default engine type other than normal alphax-2chan
@ -17,11 +16,6 @@ endif
DDEFS += -DEFI_MAIN_RELAY_CONTROL=TRUE DDEFS += -DEFI_MAIN_RELAY_CONTROL=TRUE
DDEFS += -DLED_ERROR_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_RUNING_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_WARNING_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_COMMUNICATION_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DTS_NO_SECONDARY DDEFS += -DTS_NO_SECONDARY
# Add them all together # Add them all together
@ -34,6 +28,5 @@ DDEFS += -DEFI_LOGIC_ANALYZER=FALSE
# Enable serial pins on expansion header # Enable serial pins on expansion header
DDEFS += -DEFI_CONSOLE_TX_BRAIN_PIN=GPIOD_6 -DEFI_CONSOLE_RX_BRAIN_PIN=GPIOD_5 -DTS_PRIMARY_PORT=UARTD2 -DSTM32_UART_USE_USART2=1 DDEFS += -DEFI_CONSOLE_TX_BRAIN_PIN=GPIOD_6 -DEFI_CONSOLE_RX_BRAIN_PIN=GPIOD_5 -DTS_PRIMARY_PORT=UARTD2 -DSTM32_UART_USE_USART2=1
# We are running on Hellen-One hardware! include $(BOARDS_DIR)/hellen/hellen-common.mk
DDEFS += -DHW_HELLEN=1

13
firmware/config/boards/hellen/hellen-common.mk Normal file
View File

@ -0,0 +1,13 @@
# Combine the related files for a specific platform and MCU.
# Target ECU board design
BOARDCPPSRC += $(BOARDS_DIR)/hellen/hellen_common.cpp \
$(BOARDS_DIR)/hellen/hellen_board_id.cpp
DDEFS += -DLED_ERROR_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_RUNING_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_WARNING_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_COMMUNICATION_BRAIN_PIN_MODE=INVERTED_OUTPUT
# We are running on Hellen-One hardware!
DDEFS += -DHW_HELLEN=1

12
firmware/config/boards/hellen/hellen-nb1/board.mk
View File

@ -1,8 +1,7 @@
# Combine the related files for a specific platform and MCU. # Combine the related files for a specific platform and MCU.
# Target ECU board design # Target ECU board design
BOARDCPPSRC = $(BOARDS_DIR)/hellen/hellen-nb1/board_configuration.cpp \ BOARDCPPSRC = $(BOARDS_DIR)/hellen/hellen-nb1/board_configuration.cpp
$(BOARDS_DIR)/hellen/hellen_common.cpp
BOARDINC = $(BOARDS_DIR)/hellen/hellen-nb1 BOARDINC = $(BOARDS_DIR)/hellen/hellen-nb1
# Set this if you want a default engine type other than normal hellen-nb1 # Set this if you want a default engine type other than normal hellen-nb1
@ -17,11 +16,6 @@ endif
DDEFS += -DEFI_MAIN_RELAY_CONTROL=TRUE DDEFS += -DEFI_MAIN_RELAY_CONTROL=TRUE
DDEFS += -DLED_ERROR_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_RUNING_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_WARNING_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_COMMUNICATION_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DTS_NO_SECONDARY DDEFS += -DTS_NO_SECONDARY
# Add them all together # Add them all together
@ -34,6 +28,4 @@ DDEFS += -DEFI_LOGIC_ANALYZER=FALSE
# Enable serial pins on expansion header # Enable serial pins on expansion header
DDEFS += -DEFI_CONSOLE_TX_BRAIN_PIN=GPIOD_6 -DEFI_CONSOLE_RX_BRAIN_PIN=GPIOD_5 -DTS_PRIMARY_PORT=UARTD2 -DSTM32_UART_USE_USART2=1 DDEFS += -DEFI_CONSOLE_TX_BRAIN_PIN=GPIOD_6 -DEFI_CONSOLE_RX_BRAIN_PIN=GPIOD_5 -DTS_PRIMARY_PORT=UARTD2 -DSTM32_UART_USE_USART2=1
# We are running on Hellen-One hardware! include $(BOARDS_DIR)/hellen/hellen-common.mk
DDEFS += -DHW_HELLEN=1

11
firmware/config/boards/hellen/hellen121nissan/board.mk
View File

@ -1,8 +1,7 @@
# Combine the related files for a specific platform and MCU. # Combine the related files for a specific platform and MCU.
# Target ECU board design # Target ECU board design
BOARDCPPSRC = $(BOARDS_DIR)/hellen/hellen121nissan/board_configuration.cpp \ BOARDCPPSRC = $(BOARDS_DIR)/hellen/hellen121nissan/board_configuration.cpp
$(BOARDS_DIR)/hellen/hellen_common.cpp
BOARDINC = $(BOARDS_DIR)/hellen/hellen121nissan BOARDINC = $(BOARDS_DIR)/hellen/hellen121nissan
# Set this if you want a default engine type other than normal hellen121nissan # Set this if you want a default engine type other than normal hellen121nissan
@ -17,11 +16,6 @@ endif
DDEFS += -DEFI_MAIN_RELAY_CONTROL=TRUE DDEFS += -DEFI_MAIN_RELAY_CONTROL=TRUE
DDEFS += -DLED_ERROR_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_RUNING_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_WARNING_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_COMMUNICATION_BRAIN_PIN_MODE=INVERTED_OUTPUT
# Disable serial ports on this board as UART3 causes a DMA conflict with the SD card # Disable serial ports on this board as UART3 causes a DMA conflict with the SD card
DDEFS += -DTS_NO_PRIMARY=1 -DTS_NO_SECONDARY=1 DDEFS += -DTS_NO_PRIMARY=1 -DTS_NO_SECONDARY=1
@ -32,5 +26,4 @@ DDEFS += -DEFI_ICU_INPUTS=FALSE -DHAL_TRIGGER_USE_PAL=TRUE
# todo: is it broken? # todo: is it broken?
DDEFS += -DEFI_LOGIC_ANALYZER=FALSE DDEFS += -DEFI_LOGIC_ANALYZER=FALSE
# We are running on Hellen-One hardware! include $(BOARDS_DIR)/hellen/hellen-common.mk
DDEFS += -DHW_HELLEN=1

11
firmware/config/boards/hellen/hellen121vag/board.mk
View File

@ -1,8 +1,7 @@
# Combine the related files for a specific platform and MCU. # Combine the related files for a specific platform and MCU.
# Target ECU board design # Target ECU board design
BOARDCPPSRC = $(BOARDS_DIR)/hellen/hellen121vag/board_configuration.cpp \ BOARDCPPSRC = $(BOARDS_DIR)/hellen/hellen121vag/board_configuration.cpp
$(BOARDS_DIR)/hellen/hellen_common.cpp
BOARDINC = $(BOARDS_DIR)/hellen/hellen121vag BOARDINC = $(BOARDS_DIR)/hellen/hellen121vag
# Set this if you want a default engine type other than normal hellen121vag # Set this if you want a default engine type other than normal hellen121vag
@ -17,11 +16,6 @@ endif
DDEFS += -DEFI_MAIN_RELAY_CONTROL=TRUE DDEFS += -DEFI_MAIN_RELAY_CONTROL=TRUE
DDEFS += -DLED_ERROR_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_RUNING_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_WARNING_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_COMMUNICATION_BRAIN_PIN_MODE=INVERTED_OUTPUT
# Disable serial ports on this board as UART3 causes a DMA conflict with the SD card # Disable serial ports on this board as UART3 causes a DMA conflict with the SD card
DDEFS += -DTS_NO_PRIMARY=1 -DTS_NO_SECONDARY=1 DDEFS += -DTS_NO_PRIMARY=1 -DTS_NO_SECONDARY=1
@ -32,6 +26,5 @@ DDEFS += -DEFI_ICU_INPUTS=FALSE -DHAL_TRIGGER_USE_PAL=TRUE
# todo: is it broken? # todo: is it broken?
DDEFS += -DEFI_LOGIC_ANALYZER=FALSE DDEFS += -DEFI_LOGIC_ANALYZER=FALSE
# We are running on Hellen-One hardware! include $(BOARDS_DIR)/hellen/hellen-common.mk
DDEFS += -DHW_HELLEN=1

11
firmware/config/boards/hellen/hellen128/board.mk
View File

@ -1,8 +1,7 @@
# Combine the related files for a specific platform and MCU. # Combine the related files for a specific platform and MCU.
# Target ECU board design # Target ECU board design
BOARDCPPSRC = $(BOARDS_DIR)/hellen/hellen128/board_configuration.cpp \ BOARDCPPSRC = $(BOARDS_DIR)/hellen/hellen128/board_configuration.cpp
$(BOARDS_DIR)/hellen/hellen_common.cpp
BOARDINC = $(BOARDS_DIR)/hellen/hellen128 BOARDINC = $(BOARDS_DIR)/hellen/hellen128
@ -18,11 +17,6 @@ endif
DDEFS += -DEFI_MAIN_RELAY_CONTROL=TRUE DDEFS += -DEFI_MAIN_RELAY_CONTROL=TRUE
DDEFS += -DLED_ERROR_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_RUNING_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_WARNING_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_COMMUNICATION_BRAIN_PIN_MODE=INVERTED_OUTPUT
# Disable serial ports on this board as UART3 causes a DMA conflict with the SD card # Disable serial ports on this board as UART3 causes a DMA conflict with the SD card
DDEFS += -DTS_NO_PRIMARY=1 -DTS_NO_SECONDARY=1 DDEFS += -DTS_NO_PRIMARY=1 -DTS_NO_SECONDARY=1
@ -33,6 +27,5 @@ DDEFS += -DEFI_ICU_INPUTS=FALSE -DHAL_TRIGGER_USE_PAL=TRUE
# todo: is it broken? # todo: is it broken?
DDEFS += -DEFI_LOGIC_ANALYZER=FALSE DDEFS += -DEFI_LOGIC_ANALYZER=FALSE
# We are running on Hellen-One hardware! include $(BOARDS_DIR)/hellen/hellen-common.mk
DDEFS += -DHW_HELLEN=1

11
firmware/config/boards/hellen/hellen154hyundai/board.mk
View File

@ -1,8 +1,7 @@
# Combine the related files for a specific platform and MCU. # Combine the related files for a specific platform and MCU.
# Target ECU board design # Target ECU board design
BOARDCPPSRC = $(BOARDS_DIR)/hellen/hellen154hyundai/board_configuration.cpp \ BOARDCPPSRC = $(BOARDS_DIR)/hellen/hellen154hyundai/board_configuration.cpp
$(BOARDS_DIR)/hellen/hellen_common.cpp
BOARDINC = $(BOARDS_DIR)/hellen/hellen154hyundai BOARDINC = $(BOARDS_DIR)/hellen/hellen154hyundai
# Set this if you want a default engine type other than normal hellen121nissan # Set this if you want a default engine type other than normal hellen121nissan
@ -17,11 +16,6 @@ endif
DDEFS += -DEFI_MAIN_RELAY_CONTROL=TRUE DDEFS += -DEFI_MAIN_RELAY_CONTROL=TRUE
DDEFS += -DLED_ERROR_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_RUNING_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_WARNING_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_COMMUNICATION_BRAIN_PIN_MODE=INVERTED_OUTPUT
# Disable serial ports on this board as UART3 causes a DMA conflict with the SD card # Disable serial ports on this board as UART3 causes a DMA conflict with the SD card
DDEFS += -DTS_NO_PRIMARY=1 -DTS_NO_SECONDARY=1 DDEFS += -DTS_NO_PRIMARY=1 -DTS_NO_SECONDARY=1
@ -32,6 +26,5 @@ DDEFS += -DEFI_ICU_INPUTS=FALSE -DHAL_TRIGGER_USE_PAL=TRUE
# todo: is it broken? # todo: is it broken?
DDEFS += -DEFI_LOGIC_ANALYZER=FALSE DDEFS += -DEFI_LOGIC_ANALYZER=FALSE
# We are running on Hellen-One hardware! include $(BOARDS_DIR)/hellen/hellen-common.mk
DDEFS += -DHW_HELLEN=1

11
firmware/config/boards/hellen/hellen64_miataNA6_94/board.mk
View File

@ -1,8 +1,7 @@
# Combine the related files for a specific platform and MCU. # Combine the related files for a specific platform and MCU.
# Target ECU board design # Target ECU board design
BOARDCPPSRC = $(BOARDS_DIR)/hellen/hellen64_miataNA6_94/board_configuration.cpp \ BOARDCPPSRC = $(BOARDS_DIR)/hellen/hellen64_miataNA6_94/board_configuration.cpp
$(BOARDS_DIR)/hellen/hellen_common.cpp
BOARDINC = $(BOARDS_DIR)/hellen/hellen64_miataNA6_94 BOARDINC = $(BOARDS_DIR)/hellen/hellen64_miataNA6_94
# Set this if you want a default engine type other than normal hellen64_miataNA6_94 # Set this if you want a default engine type other than normal hellen64_miataNA6_94
@ -17,11 +16,6 @@ endif
DDEFS += -DEFI_MAIN_RELAY_CONTROL=TRUE DDEFS += -DEFI_MAIN_RELAY_CONTROL=TRUE
DDEFS += -DLED_ERROR_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_RUNING_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_WARNING_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_COMMUNICATION_BRAIN_PIN_MODE=INVERTED_OUTPUT
# Disable serial ports on this board as UART3 causes a DMA conflict with the SD card # Disable serial ports on this board as UART3 causes a DMA conflict with the SD card
DDEFS += -DTS_NO_PRIMARY=1 -DTS_NO_SECONDARY=1 DDEFS += -DTS_NO_PRIMARY=1 -DTS_NO_SECONDARY=1
@ -32,5 +26,4 @@ DDEFS += -DEFI_ICU_INPUTS=FALSE -DHAL_TRIGGER_USE_PAL=TRUE
# todo: is it broken? # todo: is it broken?
DDEFS += -DEFI_LOGIC_ANALYZER=FALSE DDEFS += -DEFI_LOGIC_ANALYZER=FALSE
# We are running on Hellen-One hardware! include $(BOARDS_DIR)/hellen/hellen-common.mk
DDEFS += -DHW_HELLEN=1

11
firmware/config/boards/hellen/hellen72/board.mk
View File

@ -1,8 +1,7 @@
# Combine the related files for a specific platform and MCU. # Combine the related files for a specific platform and MCU.
# Target ECU board design # Target ECU board design
BOARDCPPSRC = $(BOARDS_DIR)/hellen/hellen72/board_configuration.cpp \ BOARDCPPSRC = $(BOARDS_DIR)/hellen/hellen72/board_configuration.cpp
$(BOARDS_DIR)/hellen/hellen_common.cpp
BOARDINC = $(BOARDS_DIR)/hellen/hellen72 BOARDINC = $(BOARDS_DIR)/hellen/hellen72
@ -18,11 +17,6 @@ endif
DDEFS += -DEFI_MAIN_RELAY_CONTROL=TRUE DDEFS += -DEFI_MAIN_RELAY_CONTROL=TRUE
DDEFS += -DLED_ERROR_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_RUNING_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_WARNING_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_COMMUNICATION_BRAIN_PIN_MODE=INVERTED_OUTPUT
# Disable serial ports on this board as UART3 causes a DMA conflict with the SD card # Disable serial ports on this board as UART3 causes a DMA conflict with the SD card
DDEFS += -DTS_NO_PRIMARY=1 -DTS_NO_SECONDARY=1 DDEFS += -DTS_NO_PRIMARY=1 -DTS_NO_SECONDARY=1
@ -33,5 +27,4 @@ DDEFS += -DEFI_ICU_INPUTS=FALSE -DHAL_TRIGGER_USE_PAL=TRUE
# todo: is it broken? # todo: is it broken?
DDEFS += -DEFI_LOGIC_ANALYZER=FALSE DDEFS += -DEFI_LOGIC_ANALYZER=FALSE
# We are running on Hellen-One hardware! include $(BOARDS_DIR)/hellen/hellen-common.mk
DDEFS += -DHW_HELLEN=1

11
firmware/config/boards/hellen/hellen81/board.mk
View File

@ -1,8 +1,7 @@
# Combine the related files for a specific platform and MCU. # Combine the related files for a specific platform and MCU.
# Target ECU board design # Target ECU board design
BOARDCPPSRC = $(BOARDS_DIR)/hellen/hellen81/board_configuration.cpp \ BOARDCPPSRC = $(BOARDS_DIR)/hellen/hellen81/board_configuration.cpp
$(BOARDS_DIR)/hellen/hellen_common.cpp
BOARDINC = $(BOARDS_DIR)/hellen/hellen81 BOARDINC = $(BOARDS_DIR)/hellen/hellen81
# Set this if you want a default engine type other than normal Hellen81 # Set this if you want a default engine type other than normal Hellen81
@ -20,11 +19,6 @@ endif
DDEFS += -DEFI_MAIN_RELAY_CONTROL=TRUE DDEFS += -DEFI_MAIN_RELAY_CONTROL=TRUE
DDEFS += -DLED_ERROR_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_RUNING_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_WARNING_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_COMMUNICATION_BRAIN_PIN_MODE=INVERTED_OUTPUT
# Disable serial ports on this board as UART3 causes a DMA conflict with the SD card # Disable serial ports on this board as UART3 causes a DMA conflict with the SD card
DDEFS += -DTS_NO_PRIMARY -DTS_NO_SECONDARY DDEFS += -DTS_NO_PRIMARY -DTS_NO_SECONDARY
DDEFS += -DEFI_CAN_SERIAL=TRUE DDEFS += -DEFI_CAN_SERIAL=TRUE
@ -48,5 +42,4 @@ TRIGGER_USE_ADC = yes
DDEFS += -DEFI_OVERRIDE_FAST_ADC_FOR_STM32H7=TRUE -DADC_FAST_DEVICE=ADCD1 -DEFI_USE_ONLY_FAST_ADC=TRUE -DEFI_FASTER_UNIFORM_ADC=TRUE -DADC_MAX_CHANNELS_COUNT=16 -DADC_BUF_DEPTH_FAST=1 -DADC_BUF_NUM_AVG=1 DDEFS += -DEFI_OVERRIDE_FAST_ADC_FOR_STM32H7=TRUE -DADC_FAST_DEVICE=ADCD1 -DEFI_USE_ONLY_FAST_ADC=TRUE -DEFI_FASTER_UNIFORM_ADC=TRUE -DADC_MAX_CHANNELS_COUNT=16 -DADC_BUF_DEPTH_FAST=1 -DADC_BUF_NUM_AVG=1
#DDEFS += -DADC_SLOW_DEVICE=ADCD1 #DDEFS += -DADC_SLOW_DEVICE=ADCD1
# We are running on Hellen-One hardware! include $(BOARDS_DIR)/hellen/hellen-common.mk
DDEFS += -DHW_HELLEN=1

11
firmware/config/boards/hellen/hellen88bmw/board.mk
View File

@ -1,8 +1,7 @@
# Combine the related files for a specific platform and MCU. # Combine the related files for a specific platform and MCU.
# Target ECU board design # Target ECU board design
BOARDCPPSRC = $(BOARDS_DIR)/hellen/hellen88bmw/board_configuration.cpp \ BOARDCPPSRC = $(BOARDS_DIR)/hellen/hellen88bmw/board_configuration.cpp
$(BOARDS_DIR)/hellen/hellen_common.cpp
BOARDINC = $(BOARDS_DIR)/hellen/hellen88bmw BOARDINC = $(BOARDS_DIR)/hellen/hellen88bmw
# Set this if you want a default engine type other than normal hellen88bmw # Set this if you want a default engine type other than normal hellen88bmw
@ -17,11 +16,6 @@ endif
DDEFS += -DEFI_MAIN_RELAY_CONTROL=TRUE DDEFS += -DEFI_MAIN_RELAY_CONTROL=TRUE
DDEFS += -DLED_ERROR_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_RUNING_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_WARNING_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_COMMUNICATION_BRAIN_PIN_MODE=INVERTED_OUTPUT
# Disable serial ports on this board as UART3 causes a DMA conflict with the SD card # Disable serial ports on this board as UART3 causes a DMA conflict with the SD card
DDEFS += -DTS_NO_PRIMARY=1 -DTS_NO_SECONDARY=1 DDEFS += -DTS_NO_PRIMARY=1 -DTS_NO_SECONDARY=1
@ -32,5 +26,4 @@ DDEFS += -DEFI_ICU_INPUTS=FALSE -DHAL_TRIGGER_USE_PAL=TRUE
# todo: is it broken? # todo: is it broken?
DDEFS += -DEFI_LOGIC_ANALYZER=FALSE DDEFS += -DEFI_LOGIC_ANALYZER=FALSE
# We are running on Hellen-One hardware! include $(BOARDS_DIR)/hellen/hellen-common.mk
DDEFS += -DHW_HELLEN=1

11
firmware/config/boards/hellen/hellenNA8_96/board.mk
View File

@ -1,8 +1,7 @@
# Combine the related files for a specific platform and MCU. # Combine the related files for a specific platform and MCU.
# Target ECU board design # Target ECU board design
BOARDCPPSRC = $(BOARDS_DIR)/hellen/hellen-nb1/board_configuration.cpp \ BOARDCPPSRC = $(BOARDS_DIR)/hellen/hellen-nb1/board_configuration.cpp
$(BOARDS_DIR)/hellen/hellen_common.cpp
BOARDINC = $(BOARDS_DIR)/hellen/hellen-nb1 BOARDINC = $(BOARDS_DIR)/hellen/hellen-nb1
# Set this if you want a default engine type other than normal hellen-nb1 # Set this if you want a default engine type other than normal hellen-nb1
@ -17,11 +16,6 @@ endif
DDEFS += -DEFI_MAIN_RELAY_CONTROL=TRUE DDEFS += -DEFI_MAIN_RELAY_CONTROL=TRUE
DDEFS += -DLED_ERROR_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_RUNING_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_WARNING_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DLED_COMMUNICATION_BRAIN_PIN_MODE=INVERTED_OUTPUT
DDEFS += -DTS_NO_SECONDARY DDEFS += -DTS_NO_SECONDARY
# Add them all together # Add them all together
@ -34,6 +28,5 @@ DDEFS += -DEFI_LOGIC_ANALYZER=FALSE
# Enable serial pins on expansion header # Enable serial pins on expansion header
DDEFS += -DEFI_CONSOLE_TX_BRAIN_PIN=GPIOD_6 -DEFI_CONSOLE_RX_BRAIN_PIN=GPIOD_5 -DTS_PRIMARY_PORT=UARTD2 -DSTM32_UART_USE_USART2=1 DDEFS += -DEFI_CONSOLE_TX_BRAIN_PIN=GPIOD_6 -DEFI_CONSOLE_RX_BRAIN_PIN=GPIOD_5 -DTS_PRIMARY_PORT=UARTD2 -DSTM32_UART_USE_USART2=1
# We are running on Hellen-One hardware! include $(BOARDS_DIR)/hellen/hellen-common.mk
DDEFS += -DHW_HELLEN=1

382
firmware/config/boards/hellen/hellen_board_id.cpp Normal file
View File

@ -0,0 +1,382 @@
/**
* @file boards/hellen/hellen_board_id.cpp
* @brief Board-Id detector for Hellen boards
*
* @author andreika <prometheus.pcb@gmail.com>
* @author Andrey Belomutskiy, (c) 2012-2022
*
* The main idea is to measure the capacitor charge/discharge time
* through a series resistors using standard digital I/O pins.
* One pin is used to provide a Vcc(3.3) or Vdd(0) voltage to the capacitor
* through a resistor, and another pin is used as a digital input. Then vice versa.
*
* The algo:
* 1) Completely discharge the capacitor (all pins are low)
* 2) Charge the capacitor until the voltage crosses the 0->1 voltage threshold (Vt) and measure the charging time #1 (Tc1).
* 3) Immediately discharge the capacitor to some unknown low voltage (Vl) - it should be well below the Vt threshold,
* using the same period of time used for charging as the discharge period (Td = Tc1).
* 4) Immediately charge the capacitor again and measure the time crossing the same 0->1 voltage threshold again (Tc2).
* 5) Repeat the procedure several times to get more precise timings.
* 6) Do some math and find the R and C values.
* 7) Board_Id = the unique combination of indices of the "measured" R1 and R2.
*
* The math proof:
* - Charging formula #1:
* Vt = Vññ * (1 - exp(-Tc1 / RC))
* - Discharging formula:
* Vl = Vt * exp(-Td / RC)
* - Charging formula #2:
* Vl = Vññ * (1 - exp(-Tl / (RC)))
* - Where Tl is a charging time from 0 to Vl:
* Tl = Tc1 - Tc2
* - Solve the equations:
* Vl = Vññ * (1 - exp(-Tl / RC)) = Vt * exp(-Td / RC)
* Vññ * (1 - exp(-Tl / RC)) = Vññ * (1 - exp(-Tc1 / RC)) * exp(-Td / RC)
* (1 - exp(-Tl / RC)) = (1 - exp(-Tc1 / RC)) * exp(-Td / RC)
* - Simplify the equation:
* X = exp(-1/(RC))
* (1 - X^Tc1) * X^Td + X^Tl - 1 = 0
*
* X^Td - X^(Tc1+Td) + X^(Tc2-Tc1) - 1 = 0
*
* Td, Tc1 and Tc2 are known.
* - Solve the power function for X and get the desired R or C.
*
* We use Newton's method (a fast-converging numerical solver when the 1st derivative is known)
* with estimated initial values.
*/
#include "pch.h"
#include "hellen_meta.h"
#include "digital_input_exti.h"
#include "hellen_board_id.h"
/* We use known standard E24 series resistor values (1%) to find the closest match.
The 16 major values should have a guarateed spacing of 15% in a row (1% R tolerance + 10% C tolerance)
These should match the values in the gen_board_id script!
*/
#include "hellen_board_id_resistors.h"
//#define HELLEN_BOARD_ID_DEBUG
#if EFI_PROD_CODE
#if STM32_GPT_USE_TIM6
#define HELLEN_BOARD_ID_GPTDEVICE GPTD6
#else
#error "STM32_GPT_USE_TIM6 is required for Hellen Board-ID detector!"
#endif /* STM32_GPT_USE_TIM6 */
static void hellenBoardIdInputCallback(void *arg, efitick_t nowNt) {
UNUSED(arg);
chibios_rt::CriticalSectionLocker csl;
HellenBoardIdFinderState *state = (HellenBoardIdFinderState *)arg;
// Now start discharging immediately! This should be the first command in the interrupt handler.
palClearPad(state->rOutputPinPort, state->rOutputPinIdx);
state->timeChargeNt = nowNt;
chSemSignalI(&state->boardId_wake); // no need to call chSchRescheduleS() because we're inside the ISR
}
#endif /* EFI_PROD_CODE */
// Newton's numerical method (x is R and y is C, or vice-versa)
float HellenBoardIdSolver::solve(float Tc1, float Tc2, float x0, float y, float deltaX) {
// the discharge time equals to the charge time
float Td = Tc1;
float iC = -1.0f / y;
k1 = iC * Td;
k2 = iC * (Tc1 + Td);
k3 = iC * (Tc1 - Tc2);
// the same method works for R (if C is known) or C (if R is known)
float Xcur, Xnext;
Xnext = x0;
do {
Xcur = Xnext;
Xnext = Xcur - fx(Xcur) / dfx(Xcur);
#ifdef HELLEN_BOARD_ID_DEBUG
efiPrintf ("* %f", Xnext);
#endif /* HELLEN_BOARD_ID_DEBUG */
} while (absF(Xnext - Xcur) > deltaX);
return Xnext;
}
float HellenBoardIdFinderBase::findClosestResistor(float R, bool testOnlyMajorSeries, int *rIdx) {
// the first "major" resistor uses less values (with more spacing between them) so that even less precise method cannot fail.
static const float rOnlyMajorValues[] = {
HELLEN_BOARD_ID_MAJOR_RESISTORS
};
// the minor resistor is always measured after the major one, when the exact capacitance is already knows,
// so we can use more values and detect them with better precision.
static const float rAllValues[] = {
// these are equal to the major values and should be used first
HELLEN_BOARD_ID_MAJOR_RESISTORS
// these are extended series if 256 board IDs aren't enough (16*16).
HELLEN_BOARD_ID_MINOR_RESISTORS
};
size_t rValueSize = testOnlyMajorSeries ? efi::size(rOnlyMajorValues) : efi::size(rAllValues);
*rIdx = -1;
float minDelta = 1.e6f;
for (size_t i = 0; i < rValueSize; i++) {
float delta = absF(R - rAllValues[i]);
if (delta < minDelta) {
minDelta = delta;
*rIdx = i;
#ifdef HELLEN_BOARD_ID_DEBUG
efiPrintf("* [%d] R = %.0f, delta = %f", i, rAllValues[i], delta);
#endif /* HELLEN_BOARD_ID_DEBUG */
}
}
return rAllValues[*rIdx];
}
float HellenBoardIdFinderBase::calcEstimatedResistance(float Tc1_us, float C) {
constexpr float Vcc = 3.3f - 0.1f; // STM32 digital I/O voltage (adjusted for minor voltage drop)
constexpr float V01 = Vcc * 0.5f; // let it be 1.6 volts (closer to the datasheet value), the exact value doesn't matter
// macos compiler doesn't like log() in constexpr
float log1V01Vcc = log(1.0f - V01 / Vcc);
// this is only an estimated value, we cannot use it for Board-ID detection!
float Rest = -Tc1_us / (C * log1V01Vcc);
return Rest;
}
float HellenBoardIdFinderBase::calc(float Tc1_us, float Tc2_us, float Rest, float C, bool testOnlyMajorSeries, float *Rmeasured, float *newC, int *rIdx) {
constexpr float Cest = HELLEN_BOARD_ID_CAPACITOR;
// Now calculate the resistance value
HellenBoardIdSolver rSolver;
// solve the equation for R (1 Ohm precision is more than enough)
*Rmeasured = rSolver.solve(Tc1_us, Tc2_us, Rest, C, 1.0f);
// add 30 Ohms for pin's internal resistance
// (according to the STM32 datasheets, the voltage drop on an output pin can be up to 0.4V for 8 mA current)
constexpr float Rinternal = 30.0f;
float R = findClosestResistor(*Rmeasured - Rinternal, testOnlyMajorSeries, rIdx);
// Find the 'real' capacitance value and use it for the next resistor iteration (gives more precision)
HellenBoardIdSolver cSolver;
// We expect the capacitance to be +-10%
constexpr float capacitorPrecision = 0.1f;
constexpr float Cmin = Cest * (1.0f - capacitorPrecision);
constexpr float Cmax = Cest * (1.0f + capacitorPrecision);
// solve the equation for C (1% precision)
*newC = cSolver.solve(Tc1_us, Tc2_us, Cmin, R + Rinternal, 0.01f);
// in case something went wrong, we must be in the allowed range
*newC = clampF(Cmin, *newC, Cmax);
return R;
}
template <size_t NumPins>
bool HellenBoardIdFinder<NumPins>::measureChargingTimes(int i, float & Tc1_us, float & Tc2_us) {
#if EFI_PROD_CODE
chSemReset(&state.boardId_wake, 0);
// full charge/discharge time, and also 'timeout' time
const int Tf_us = 50000; // 50 ms is more than enough to "fully" discharge the capacitor with any two resistors used at the same time.
// 1. Fully discharge the capacitor through both resistors (faster)
for (size_t k = 0; k < NumPins; k++) {
palClearPad(getBrainPinPort(rPins[k]), getBrainPinIndex(rPins[k]));
palSetPadMode(getBrainPinPort(rPins[k]), getBrainPinIndex(rPins[k]), PAL_MODE_OUTPUT_PUSHPULL);
}
// wait max. time because we don't know the resistor values yet
chThdSleepMicroseconds(Tf_us);
// use one pin as an charge/discharge controlling output
state.rOutputPinPort = getBrainPinPort(rPins[i]);
state.rOutputPinIdx = getBrainPinIndex(rPins[i]);
palSetPadMode(state.rOutputPinPort, state.rOutputPinIdx, PAL_MODE_OUTPUT_PUSHPULL);
// use another pin as an input to detect 0->1 crossings
int inputIdx = 1 - i;
state.rInputPinPort = getBrainPinPort(rPins[inputIdx]);
state.rInputPinIdx = getBrainPinIndex(rPins[inputIdx]);
// set only high-Z input mode, no pull-ups/pull-downs allowed!
palSetPadMode(state.rInputPinPort, state.rInputPinIdx, PAL_MODE_INPUT);
efiExtiEnablePin("boardId", rPins[inputIdx], PAL_EVENT_MODE_RISING_EDGE, hellenBoardIdInputCallback, (void *)&state);
int pinState = palReadPad(state.rInputPinPort, state.rInputPinIdx);
if (pinState != 0) {
// the input pin state should be low when the capacitor is fully discharged
efiPrintf("* Board detection error!");
return false;
}
// 2. Start charging until the input pin triggers (V01 threshold is reached)
state.timeChargeNt = 0;
efitick_t nowNt1 = getTimeNowNt();
palSetPad(state.rOutputPinPort, state.rOutputPinIdx);
chSemWaitTimeout(&state.boardId_wake, TIME_US2I(Tf_us));
// 3. At the moment, the discharging has already been started!
// Meanwhile we need to do some checks - until some pre-selected voltage is presumably reached.
// if voltage didn't change on the input pin, then the charging didn't start,
// meaning there's no capacitor and/or resistors on these pins.
if (state.timeChargeNt <= nowNt1) {
efiPrintf("* Hellen Board ID circuitry wasn't detected! Aborting!");
return false;
}
// 4. calculate the first charging time
Tc1_us = NT2USF(state.timeChargeNt - nowNt1);
// We use the same 'charging time' to discharge the capacitor to some random voltage below the threshold voltage.
float Td_us = Tc1_us;
// we can make a tiny delay adjustments to compensate for the code execution overhead (every usec matters!)
efitick_t nowNt2 = getTimeNowNt();
float TdAdj_us = NT2USF(nowNt2 - state.timeChargeNt);
// 5. And now just wait for the rest of the discharge process...
// We cannot use chThdSleepMicroseconds() here because we need more precise delay
gptPolledDelay(&HELLEN_BOARD_ID_GPTDEVICE, Td_us - TdAdj_us);
// the input pin state should be low when the capacitor is discharged to Vl
pinState = palReadPad(state.rInputPinPort, state.rInputPinIdx);
// 6. And immediately begin charging again until the threshold voltage is reached!
state.timeChargeNt = 0;
palSetPad(state.rOutputPinPort, state.rOutputPinIdx);
// Wait for the charging completion
efitick_t nowNt3 = getTimeNowNt();
chSemReset(&state.boardId_wake, 0);
chSemWaitTimeout(&state.boardId_wake, TIME_US2I(Tf_us));
// 7. calculate the second charge time
Tc2_us = NT2USF(state.timeChargeNt - nowNt3);
#ifdef HELLEN_BOARD_ID_DEBUG
efitick_t nowNt4 = getTimeNowNt();
efiPrintf("* dTime21 = %d", (int)(nowNt2 - nowNt1));
efiPrintf("* dTime32 = %d", (int)(nowNt3 - nowNt2));
efiPrintf("* dTime43 = %d", (int)(nowNt4 - nowNt3));
efiPrintf("* Tc1 = %f, Tc2 = %f, Td = %f, TdAdj = %f", Tc1_us, Tc2_us, Td_us, TdAdj_us);
#endif /* HELLEN_BOARD_ID_DEBUG */
// sanity checks
if (pinState != 0) {
efiPrintf("* Board detection error! (Td=%f is too small)", Td_us);
return false;
}
if (state.timeChargeNt <= nowNt3) {
efiPrintf("* Estimates are out of limit! Something went wrong. Aborting!");
return false;
}
efiExtiDisablePin(rPins[inputIdx]);
#endif /* EFI_PROD_CODE */
return true;
}
template <size_t NumPins>
bool HellenBoardIdFinder<NumPins>::measureChargingTimesAveraged(int i, float & Tc1_us, float & Tc2_us) {
const int numTries = 3;
Tc1_us = 0;
Tc2_us = 0;
for (int tries = 0; tries < numTries; tries++) {
// get the charging times
float Tc1i_us = 0, Tc2i_us = 0;
if (!measureChargingTimes(i, Tc1i_us, Tc2i_us))
return false;
Tc1_us += Tc1i_us;
Tc2_us += Tc2i_us;
}
// averaging
Tc1_us /= numTries;
Tc2_us /= numTries;
return true;
}
int detectHellenBoardId() {
int boardId = 0;
#if EFI_PROD_CODE
efiPrintf("Starting Hellen Board ID detection...");
efitick_t beginNt = getTimeNowNt();
// Hellen boards use GPIOF_0 and GPIOF_1.
const int numPins = 2;
brain_pin_e rPins[numPins] = { GPIOF_0, GPIOF_1 };
// We start from the estimated capacitance, but the real one can be +-10%
float C = HELLEN_BOARD_ID_CAPACITOR;
// we need to find the resistor values connected to the mcu pins and to the capacitor.
float R[numPins] = { 0 };
int rIdx[numPins] = { 0 };
HellenBoardIdFinder<numPins> finder(rPins);
// init some ChibiOs objects
chSemObjectInit(&finder.state.boardId_wake, 0);
static constexpr GPTConfig gptCfg = { 1000000 /* 1 MHz timer clock.*/, NULL, 0, 0 };
gptStart(&HELLEN_BOARD_ID_GPTDEVICE, &gptCfg);
// R1 is the first, R2 is the second
for (int i = 0; i < numPins; i++) {
#ifdef HELLEN_BOARD_ID_DEBUG
efiPrintf("*** Resistor R%d...", i + 1);
#endif /* HELLEN_BOARD_ID_DEBUG */
float Tc1_us = 0, Tc2_us = 0;
// We need several measurements for each resistor to increase the presision.
// But if any of the measurements fails, then abort!
if (!finder.measureChargingTimesAveraged(i, Tc1_us, Tc2_us))
break;
// Now roughly estimate the resistor value using the approximate threshold voltage.
float Rest = finder.calcEstimatedResistance(Tc1_us, C);
// check if we are inside the range
if (Rest < 300.0f || Rest > 15000.0f) {
efiPrintf("* Unrealistic estimated resistor value (%f)! Aborting!", Rest);
break;
}
// for the first resistor, we test only "major" values because we don't know the exact capacitance yet
bool testOnlyMajorSeries = (i == 0);
float Rmeasured, newC;
// Now calculate the R and C
R[i] = finder.calc(Tc1_us, Tc2_us, Rest, C, testOnlyMajorSeries, &Rmeasured, &newC, &rIdx[i]);
C = newC;
#ifdef HELLEN_BOARD_ID_DEBUG
efiPrintf("* R = %f, Rmeasured = %f, Rest = %f, Creal = %f", R[i], Rmeasured, Rest, C);
#endif /* HELLEN_BOARD_ID_DEBUG */
}
// in case the process was aborted
for (size_t k = 0; k < numPins; k++) {
efiExtiDisablePin(rPins[k]);
// release the pins
palSetPadMode(getBrainPinPort(rPins[k]), getBrainPinIndex(rPins[k]), PAL_MODE_RESET);
}
gptStop(&HELLEN_BOARD_ID_GPTDEVICE);
efitick_t endNt = getTimeNowNt();
int elapsed_Ms = US2MS(NT2US(endNt - beginNt));
boardId = HELLEN_GET_BOARD_ID(rIdx[0], rIdx[1]);
efiPrintf("* RESULT: BordId = %d, R1 = %.0f, R2 = %.0f (Elapsed time: %d ms)", boardId, R[0], R[1], elapsed_Ms);
#endif /* EFI_PROD_CODE */
return boardId;
}

77
firmware/config/boards/hellen/hellen_board_id.h Normal file
View File

@ -0,0 +1,77 @@
/**
* @file boards/hellen/hellen_board_id.h
* @brief Board-Id detector for Hellen boards
*
* @author andreika <prometheus.pcb@gmail.com>
* @author Andrey Belomutskiy, (c) 2012-2022
*/
#pragma once
// this is used by the detection method and should be visible to the interrupt handler (hellenBoardIdInputCallback)
class HellenBoardIdFinderState
{
public:
efitick_t timeChargeNt = 0;
ioportid_t rOutputPinPort;
int rOutputPinIdx;
ioportid_t rInputPinPort;
int rInputPinIdx;
#if EFI_PROD_CODE
semaphore_t boardId_wake;
#endif /* EFI_PROD_CODE */
};
// We need to solve the following equation for R or C:
// X^Td - X^(Tc1+Td) + X^(Tc2-Tc1) - 1 = 0
// where: X = exp(-1/(RC))
class HellenBoardIdSolver
{
public:
float fx(float x) {
return exp(k1 / x) - exp(k2 / x) + exp(k3 / x) - 1.0;
}
// first-order derivative
float dfx(float x) {
return (-1.0f / (x * x)) * (k1 * exp(k1 / x) - k2 * exp(k2 / x) + k3 * exp(k3 / x));
}
// Newton numerical method (x is R and y is C, or vice-versa)
float solve(float Tc1, float Tc2, float x0, float y, float deltaX);
private:
// exponential function coefs (see solve())
float k1, k2, k3;
};
class HellenBoardIdFinderBase
{
public:
float calc(float Tc1_us, float Tc2_us, float Rest, float C, bool testOnlyMajorSeries, float *Rmeasured, float *Cest, int *rIdx);
float findClosestResistor(float R, bool testOnlyMajorSeries, int *rIdx);
float calcEstimatedResistance(float Tc1_us, float C);
public:
HellenBoardIdFinderState state;
};
template <size_t NumPins>
class HellenBoardIdFinder : public HellenBoardIdFinderBase
{
public:
HellenBoardIdFinder(brain_pin_e (&rP)[NumPins]) : rPins(rP) {}
// R1 or R2
bool measureChargingTimes(int i, float & Tc1_us, float & Tc2_us);
bool measureChargingTimesAveraged(int i, float & Tc1_us, float & Tc2_us);
public:
brain_pin_e (&rPins)[NumPins];
HellenBoardIdFinderState state;
};

14
firmware/config/boards/hellen/hellen_board_id_resistors.h Normal file
View File

@ -0,0 +1,14 @@
//
// was generated automatically by Hellen Board-ID generation tool gen_hellen_board_id.jar
//
// major_idx = 0..15
#define HELLEN_BOARD_ID_MAJOR_RESISTORS 510, 620, 750, 1000, 1200, 1500, 1800, 2200, 2700, 3300, 3900, 4700, 5600, 6800, 8200, 10000,
// minor_idx = 0..12
#define HELLEN_BOARD_ID_MINOR_RESISTORS 560, 680, 820, 1100, 1200, 2000, 2400, 3000, 3600, 4300, 5100, 6200, 7500,
// C = 1uF
#define HELLEN_BOARD_ID_CAPACITOR 1.0f
// R1_IDX = 0..15, R2_IDX = 0..28 (max. 464 boardIds)
#define HELLEN_GET_BOARD_ID(R1_IDX, R2_IDX) ((R1_IDX) * 100 + (R2_IDX))

7
firmware/config/boards/hellen/hellen_common.cpp
View File

@ -33,7 +33,7 @@ void setHellen176LedPins() {
} }
// this should be called before setHellenXXXLedPins() // this should be called before setHellenXXXLedPins()
void detectHellenBoardType() { void detectHellenMcuType() {
// we test the red LED1 pin because the red LED used has the smallest voltage drop, // we test the red LED1 pin because the red LED used has the smallest voltage drop,
// and thus can be detected more accurately // and thus can be detected more accurately
static const brain_pin_e led1Pins[2] = { static const brain_pin_e led1Pins[2] = {
@ -70,3 +70,8 @@ void detectHellenBoardType() {
efiPrintf("* Cannot detect Hellen mcu module!"); efiPrintf("* Cannot detect Hellen mcu module!");
} }
} }
void detectHellenBoardType() {
detectHellenMcuType();
detectHellenBoardId();
}

1
firmware/config/boards/hellen_meta.h
View File

@ -13,6 +13,7 @@ void setHellenDefaultVrThresholds();
void setHellen144LedPins(); void setHellen144LedPins();
void setHellen176LedPins(); void setHellen176LedPins();
int detectHellenBoardId();
void detectHellenBoardType(); void detectHellenBoardType();
// stm32 UART8 // stm32 UART8

9
firmware/hw_layer/hardware.cpp
View File

@ -428,6 +428,11 @@ void initHardwareNoConfig() {
#if EFI_FILE_LOGGING #if EFI_FILE_LOGGING
initEarlyMmcCard(); initEarlyMmcCard();
#endif // EFI_FILE_LOGGING #endif // EFI_FILE_LOGGING
#if HAL_USE_PAL && EFI_PROD_CODE
// this should be initialized before detectBoardType()
efiExtiInit();
#endif // HAL_USE_PAL
} }
void stopHardware() { void stopHardware() {
@ -475,10 +480,6 @@ __attribute__((weak)) void boardInitHardware() { }
__attribute__((weak)) void setPinConfigurationOverrides() { } __attribute__((weak)) void setPinConfigurationOverrides() { }
void initHardware() { void initHardware() {
#if HAL_USE_PAL && EFI_PROD_CODE
efiExtiInit();
#endif // HAL_USE_PAL
#if EFI_HD44780_LCD #if EFI_HD44780_LCD
lcd_HD44780_init(); lcd_HD44780_init();
if (hasFirmwareError()) if (hasFirmwareError())

1
firmware/util/efitime.h
View File

@ -34,6 +34,7 @@
// And back // And back
#define NT2US(x) ((x) / US_TO_NT_MULTIPLIER) #define NT2US(x) ((x) / US_TO_NT_MULTIPLIER)
#define NT2USF(x) (((float)(x)) / US_TO_NT_MULTIPLIER)
// milliseconds to ticks // milliseconds to ticks
#define MS2NT(msTime) US2NT(MS2US(msTime)) #define MS2NT(msTime) US2NT(MS2US(msTime))

2
unit_tests/Makefile
View File

@ -29,6 +29,7 @@ CPPSRC += $(ALLCPPSRC) \
$(DEVELOPMENT_DIR)/engine_sniffer.cpp \ $(DEVELOPMENT_DIR)/engine_sniffer.cpp \
$(PROJECT_DIR)/console/binary/tooth_logger.cpp \ $(PROJECT_DIR)/console/binary/tooth_logger.cpp \
$(PROJECT_DIR)/console/binary_log/log_field.cpp \ $(PROJECT_DIR)/console/binary_log/log_field.cpp \
$(PROJECT_DIR)/config/boards/hellen/hellen_board_id.cpp \
$(PROJECT_DIR)/../unit_tests/logicdata.cpp \ $(PROJECT_DIR)/../unit_tests/logicdata.cpp \
$(PROJECT_DIR)/../unit_tests/main.cpp \ $(PROJECT_DIR)/../unit_tests/main.cpp \
$(PROJECT_DIR)/../unit_tests/global_mocks.cpp \ $(PROJECT_DIR)/../unit_tests/global_mocks.cpp \
@ -38,6 +39,7 @@ INCDIR += \
$(PCH_DIR) \ $(PCH_DIR) \
$(UNIT_TESTS_DIR) \ $(UNIT_TESTS_DIR) \
$(ALLINC) \ $(ALLINC) \
$(PROJECT_DIR)/config/boards/hellen \
$(UNIT_TESTS_DIR)/test_data_structures \ $(UNIT_TESTS_DIR)/test_data_structures \
$(UNIT_TESTS_DIR)/chibios-mock \ $(UNIT_TESTS_DIR)/chibios-mock \
$(UNIT_TESTS_DIR)/tests \ $(UNIT_TESTS_DIR)/tests \

56
unit_tests/tests/test_hellen_board_id.cpp Normal file
View File

@ -0,0 +1,56 @@
/*
* @file test_hellen_board_id.cpp
*
* @date Jan 20, 2022
* @author andreika <prometheus.pcb@gmail.com>
* @author Andrey Belomutskiy, (c) 2012-2022
*/
#include "pch.h"
#include "gtest/gtest.h"
#include "hellen_meta.h"
#include "digital_input_exti.h"
#include "hellen_board_id.h"
TEST(hellen_board_id, testNewtonSolver) {
// let's prove that our formula is independent of the threshold voltage:
HellenBoardIdSolver solver;
// 1.5V threshold
EXPECT_NEAR(1100, solver.solve(666.74938f, 353.32522f, 1000.0f, 1.0f, 1.0f), 0.001);
// 2.5V threshold
EXPECT_NEAR(1100, solver.solve(1558.773f, 1335.563f, 1000.0f, 1.0f, 1.0f), 0.001);
}
TEST(hellen_board_id, testClosestResistor) {
HellenBoardIdFinderBase finder;
int rIdx;
// use only major series
EXPECT_FLOAT_EQ(1000, finder.findClosestResistor(876, true, &rIdx));
EXPECT_FLOAT_EQ(1000, finder.findClosestResistor(1100, true, &rIdx));
EXPECT_FLOAT_EQ(1200, finder.findClosestResistor(1100+1, true, &rIdx));
// use full series
EXPECT_FLOAT_EQ(1000, finder.findClosestResistor(1050, false, &rIdx));
EXPECT_FLOAT_EQ(1100, finder.findClosestResistor(1050+1, false, &rIdx));
EXPECT_FLOAT_EQ(1100, finder.findClosestResistor(1149, false, &rIdx));
EXPECT_FLOAT_EQ(1200, finder.findClosestResistor(1150, false, &rIdx));
EXPECT_FLOAT_EQ(510, finder.findClosestResistor(0, true, &rIdx));
ASSERT_EQ(0, rIdx);
}
TEST(hellen_board_id, testEstimatedResistor) {
HellenBoardIdFinderBase finder;
EXPECT_NEAR(10000, finder.calcEstimatedResistance(6931.4718055995f, 1.0f), 0.001);
}
TEST(hellen_board_id, testCalc) {
HellenBoardIdFinderBase finder;
float Rmeasured, newC;
int rIdx;
float R = finder.calc(1024.714f, 724.639555f, 1099.0f, 1.0f, false, &Rmeasured, &newC, &rIdx);
EXPECT_NEAR(1100, R, 0.001);
EXPECT_NEAR(1099.998779, Rmeasured, 0.001);
EXPECT_NEAR(0.973396897, newC, 0.001);
ASSERT_EQ(19, rIdx);
}

1
unit_tests/tests/tests.mk
View File

@ -85,6 +85,7 @@ TESTS_SRC_CPP = \
tests/test_limp.cpp \ tests/test_limp.cpp \
tests/trigger/test_all_triggers.cpp \ tests/trigger/test_all_triggers.cpp \
tests/test_can_serial.cpp \ tests/test_can_serial.cpp \
tests/test_hellen_board_id.cpp \
tests/sensor/test_frequency_sensor.cpp \ tests/sensor/test_frequency_sensor.cpp \
tests/sensor/test_turbocharger_speed_converter.cpp \ tests/sensor/test_turbocharger_speed_converter.cpp \
tests/sensor/test_vehicle_speed_converter.cpp \ tests/sensor/test_vehicle_speed_converter.cpp \