diff --git a/firmware/config/boards/cypress/config/controllers/algo/engine_configuration_generated_structures.h b/firmware/config/boards/cypress/config/controllers/algo/engine_configuration_generated_structures.h index 4fdf3cbc73..e4960b2b3f 100644 --- a/firmware/config/boards/cypress/config/controllers/algo/engine_configuration_generated_structures.h +++ b/firmware/config/boards/cypress/config/controllers/algo/engine_configuration_generated_structures.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:57:58 UTC 2023 +// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:29:17 UTC 2023 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -896,9 +896,7 @@ struct engine_configuration_s { */ injection_mode_e crankingInjectionMode; /** - * This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". - * set injection_mode X - * See also twoWireBatchInjection + * This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. * offset 383 */ injection_mode_e injectionMode; @@ -5311,4 +5309,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 23468); // end -// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:57:58 UTC 2023 +// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:29:17 UTC 2023 diff --git a/firmware/config/boards/cypress/config/controllers/algo/rusefi_generated.h b/firmware/config/boards/cypress/config/controllers/algo/rusefi_generated.h index e50f4032c3..6a61d72797 100644 --- a/firmware/config/boards/cypress/config/controllers/algo/rusefi_generated.h +++ b/firmware/config/boards/cypress/config/controllers/algo/rusefi_generated.h @@ -1084,7 +1084,7 @@ #define SentEtbType_NONE 0 #define show_Frankenso_presets true #define show_test_presets true -#define SIGNATURE_HASH 3353311123 +#define SIGNATURE_HASH 507598441 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4" #define spi_device_e_SPI_DEVICE_1 1 @@ -1375,7 +1375,7 @@ #define ts_show_vbatt true #define ts_show_vr_threshold_2 true #define ts_show_vr_threshold_all true -#define TS_SIGNATURE "rusEFI master.2023.07.19.cypress.3353311123" +#define TS_SIGNATURE "rusEFI master.2023.07.19.cypress.507598441" #define TS_SINGLE_WRITE_COMMAND 'W' #define TS_SINGLE_WRITE_COMMAND_char W #define TS_TEST_COMMAND 't' diff --git a/firmware/config/boards/kinetis/config/controllers/algo/engine_configuration_generated_structures.h b/firmware/config/boards/kinetis/config/controllers/algo/engine_configuration_generated_structures.h index 75f8c7989f..3313f80da9 100644 --- a/firmware/config/boards/kinetis/config/controllers/algo/engine_configuration_generated_structures.h +++ b/firmware/config/boards/kinetis/config/controllers/algo/engine_configuration_generated_structures.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:57:57 UTC 2023 +// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:29:16 UTC 2023 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -896,9 +896,7 @@ struct engine_configuration_s { */ injection_mode_e crankingInjectionMode; /** - * This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". - * set injection_mode X - * See also twoWireBatchInjection + * This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. * offset 383 */ injection_mode_e injectionMode; @@ -5311,4 +5309,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 23468); // end -// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:57:57 UTC 2023 +// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:29:16 UTC 2023 diff --git a/firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h b/firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h index 7716776c2b..a286828072 100644 --- a/firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h +++ b/firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h @@ -1084,7 +1084,7 @@ #define SentEtbType_NONE 0 #define show_Frankenso_presets true #define show_test_presets true -#define SIGNATURE_HASH 2936591711 +#define SIGNATURE_HASH 1989604517 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4" #define spi_device_e_SPI_DEVICE_1 1 @@ -1375,7 +1375,7 @@ #define ts_show_vbatt true #define ts_show_vr_threshold_2 true #define ts_show_vr_threshold_all true -#define TS_SIGNATURE "rusEFI master.2023.07.19.kin.2936591711" +#define TS_SIGNATURE "rusEFI master.2023.07.19.kin.1989604517" #define TS_SINGLE_WRITE_COMMAND 'W' #define TS_SINGLE_WRITE_COMMAND_char W #define TS_TEST_COMMAND 't' diff --git a/firmware/config/boards/subaru_eg33/config/controllers/algo/engine_configuration_generated_structures.h b/firmware/config/boards/subaru_eg33/config/controllers/algo/engine_configuration_generated_structures.h index e586a6f372..7c5cfa36af 100644 --- a/firmware/config/boards/subaru_eg33/config/controllers/algo/engine_configuration_generated_structures.h +++ b/firmware/config/boards/subaru_eg33/config/controllers/algo/engine_configuration_generated_structures.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:57:59 UTC 2023 +// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:29:18 UTC 2023 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -896,9 +896,7 @@ struct engine_configuration_s { */ injection_mode_e crankingInjectionMode; /** - * This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". - * set injection_mode X - * See also twoWireBatchInjection + * This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. * offset 383 */ injection_mode_e injectionMode; @@ -5311,4 +5309,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 23468); // end -// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:57:59 UTC 2023 +// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:29:18 UTC 2023 diff --git a/firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h b/firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h index c9a4a042d8..543280b3a8 100644 --- a/firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h +++ b/firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h @@ -1031,7 +1031,7 @@ #define show_Frankenso_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 3226644612 +#define SIGNATURE_HASH 432836990 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4" #define spi_device_e_SPI_DEVICE_1 1 @@ -1322,7 +1322,7 @@ #define ts_show_vbatt true #define ts_show_vr_threshold_2 true #define ts_show_vr_threshold_all true -#define TS_SIGNATURE "rusEFI master.2023.07.19.subaru_eg33_f7.3226644612" +#define TS_SIGNATURE "rusEFI master.2023.07.19.subaru_eg33_f7.432836990" #define TS_SINGLE_WRITE_COMMAND 'W' #define TS_SINGLE_WRITE_COMMAND_char W #define TS_TEST_COMMAND 't' diff --git a/firmware/controllers/generated/engine_configuration_generated_structures.h b/firmware/controllers/generated/engine_configuration_generated_structures.h index e1c2b1fca8..e426a2b2ec 100644 --- a/firmware/controllers/generated/engine_configuration_generated_structures.h +++ b/firmware/controllers/generated/engine_configuration_generated_structures.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 15:00:00 UTC 2023 +// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:30:54 UTC 2023 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -896,9 +896,7 @@ struct engine_configuration_s { */ injection_mode_e crankingInjectionMode; /** - * This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". - * set injection_mode X - * See also twoWireBatchInjection + * This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. * offset 383 */ injection_mode_e injectionMode; @@ -5311,4 +5309,4 @@ struct persistent_config_s { static_assert(sizeof(persistent_config_s) == 23468); // end -// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 15:00:00 UTC 2023 +// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:30:54 UTC 2023 diff --git a/firmware/controllers/generated/rusefi_generated.h b/firmware/controllers/generated/rusefi_generated.h index 1786fd883a..ad159752c4 100644 --- a/firmware/controllers/generated/rusefi_generated.h +++ b/firmware/controllers/generated/rusefi_generated.h @@ -1084,7 +1084,7 @@ #define SentEtbType_NONE 0 #define show_Frankenso_presets true #define show_test_presets true -#define SIGNATURE_HASH 1690822056 +#define SIGNATURE_HASH 3176776786 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4" #define spi_device_e_SPI_DEVICE_1 1 @@ -1375,7 +1375,7 @@ #define ts_show_vbatt true #define ts_show_vr_threshold_2 true #define ts_show_vr_threshold_all true -#define TS_SIGNATURE "rusEFI master.2023.07.19.f407-discovery.1690822056" +#define TS_SIGNATURE "rusEFI master.2023.07.19.f407-discovery.3176776786" #define TS_SINGLE_WRITE_COMMAND 'W' #define TS_SINGLE_WRITE_COMMAND_char W #define TS_TEST_COMMAND 't' diff --git a/firmware/controllers/generated/signature_48way.h b/firmware/controllers/generated/signature_48way.h index 73f86bad3f..e8863c6555 100644 --- a/firmware/controllers/generated/signature_48way.h +++ b/firmware/controllers/generated/signature_48way.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2198208297 -#define TS_SIGNATURE "rusEFI master.2023.07.19.48way.2198208297" +#define SIGNATURE_HASH 1520164563 +#define TS_SIGNATURE "rusEFI master.2023.07.19.48way.1520164563" diff --git a/firmware/controllers/generated/signature_alphax-2chan.h b/firmware/controllers/generated/signature_alphax-2chan.h index f3defd3909..40b2b1429f 100644 --- a/firmware/controllers/generated/signature_alphax-2chan.h +++ b/firmware/controllers/generated/signature_alphax-2chan.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3209567126 -#define TS_SIGNATURE "rusEFI master.2023.07.19.alphax-2chan.3209567126" +#define SIGNATURE_HASH 1724922476 +#define TS_SIGNATURE "rusEFI master.2023.07.19.alphax-2chan.1724922476" diff --git a/firmware/controllers/generated/signature_alphax-4chan.h b/firmware/controllers/generated/signature_alphax-4chan.h index 9875b15b27..1c48c9d09a 100644 --- a/firmware/controllers/generated/signature_alphax-4chan.h +++ b/firmware/controllers/generated/signature_alphax-4chan.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3837704058 -#define TS_SIGNATURE "rusEFI master.2023.07.19.alphax-4chan.3837704058" +#define SIGNATURE_HASH 1025545856 +#define TS_SIGNATURE "rusEFI master.2023.07.19.alphax-4chan.1025545856" diff --git a/firmware/controllers/generated/signature_alphax-4chan_f7.h b/firmware/controllers/generated/signature_alphax-4chan_f7.h index b4fc356377..1fa4f0e7e1 100644 --- a/firmware/controllers/generated/signature_alphax-4chan_f7.h +++ b/firmware/controllers/generated/signature_alphax-4chan_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3837704058 -#define TS_SIGNATURE "rusEFI master.2023.07.19.alphax-4chan_f7.3837704058" +#define SIGNATURE_HASH 1025545856 +#define TS_SIGNATURE "rusEFI master.2023.07.19.alphax-4chan_f7.1025545856" diff --git a/firmware/controllers/generated/signature_alphax-8chan.h b/firmware/controllers/generated/signature_alphax-8chan.h index bb021894e0..be67588d4d 100644 --- a/firmware/controllers/generated/signature_alphax-8chan.h +++ b/firmware/controllers/generated/signature_alphax-8chan.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 4130122128 -#define TS_SIGNATURE "rusEFI master.2023.07.19.alphax-8chan.4130122128" +#define SIGNATURE_HASH 800229482 +#define TS_SIGNATURE "rusEFI master.2023.07.19.alphax-8chan.800229482" diff --git a/firmware/controllers/generated/signature_alphax-8chan_f7.h b/firmware/controllers/generated/signature_alphax-8chan_f7.h index ce6ed24180..1fb423edad 100644 --- a/firmware/controllers/generated/signature_alphax-8chan_f7.h +++ b/firmware/controllers/generated/signature_alphax-8chan_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 4130122128 -#define TS_SIGNATURE "rusEFI master.2023.07.19.alphax-8chan_f7.4130122128" +#define SIGNATURE_HASH 800229482 +#define TS_SIGNATURE "rusEFI master.2023.07.19.alphax-8chan_f7.800229482" diff --git a/firmware/controllers/generated/signature_atlas.h b/firmware/controllers/generated/signature_atlas.h index 5091806779..b0e0be978b 100644 --- a/firmware/controllers/generated/signature_atlas.h +++ b/firmware/controllers/generated/signature_atlas.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3675620020 -#define TS_SIGNATURE "rusEFI master.2023.07.19.atlas.3675620020" +#define SIGNATURE_HASH 42705742 +#define TS_SIGNATURE "rusEFI master.2023.07.19.atlas.42705742" diff --git a/firmware/controllers/generated/signature_core8.h b/firmware/controllers/generated/signature_core8.h index fd14fbe971..5039a0a796 100644 --- a/firmware/controllers/generated/signature_core8.h +++ b/firmware/controllers/generated/signature_core8.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 4294474277 -#define TS_SIGNATURE "rusEFI master.2023.07.19.core8.4294474277" +#define SIGNATURE_HASH 644242399 +#define TS_SIGNATURE "rusEFI master.2023.07.19.core8.644242399" diff --git a/firmware/controllers/generated/signature_cypress.h b/firmware/controllers/generated/signature_cypress.h index 029a554e8c..d51969d371 100644 --- a/firmware/controllers/generated/signature_cypress.h +++ b/firmware/controllers/generated/signature_cypress.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on hellen_cypress_gen_config.bat by SignatureConsumer // -#define SIGNATURE_HASH 3353311123 -#define TS_SIGNATURE "rusEFI master.2023.07.19.cypress.3353311123" +#define SIGNATURE_HASH 507598441 +#define TS_SIGNATURE "rusEFI master.2023.07.19.cypress.507598441" diff --git a/firmware/controllers/generated/signature_f407-discovery.h b/firmware/controllers/generated/signature_f407-discovery.h index 14d0541208..40ecdb4df5 100644 --- a/firmware/controllers/generated/signature_f407-discovery.h +++ b/firmware/controllers/generated/signature_f407-discovery.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1690822056 -#define TS_SIGNATURE "rusEFI master.2023.07.19.f407-discovery.1690822056" +#define SIGNATURE_HASH 3176776786 +#define TS_SIGNATURE "rusEFI master.2023.07.19.f407-discovery.3176776786" diff --git a/firmware/controllers/generated/signature_f429-discovery.h b/firmware/controllers/generated/signature_f429-discovery.h index 149211c0de..1736562113 100644 --- a/firmware/controllers/generated/signature_f429-discovery.h +++ b/firmware/controllers/generated/signature_f429-discovery.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3353311123 -#define TS_SIGNATURE "rusEFI master.2023.07.19.f429-discovery.3353311123" +#define SIGNATURE_HASH 507598441 +#define TS_SIGNATURE "rusEFI master.2023.07.19.f429-discovery.507598441" diff --git a/firmware/controllers/generated/signature_frankenso_na6.h b/firmware/controllers/generated/signature_frankenso_na6.h index b2afa0095b..aad7fa762d 100644 --- a/firmware/controllers/generated/signature_frankenso_na6.h +++ b/firmware/controllers/generated/signature_frankenso_na6.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3851261785 -#define TS_SIGNATURE "rusEFI master.2023.07.19.frankenso_na6.3851261785" +#define SIGNATURE_HASH 1007924899 +#define TS_SIGNATURE "rusEFI master.2023.07.19.frankenso_na6.1007924899" diff --git a/firmware/controllers/generated/signature_harley81.h b/firmware/controllers/generated/signature_harley81.h index fd94467a30..267f74a945 100644 --- a/firmware/controllers/generated/signature_harley81.h +++ b/firmware/controllers/generated/signature_harley81.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 321338074 -#define TS_SIGNATURE "rusEFI master.2023.07.19.harley81.321338074" +#define SIGNATURE_HASH 3401128736 +#define TS_SIGNATURE "rusEFI master.2023.07.19.harley81.3401128736" diff --git a/firmware/controllers/generated/signature_hellen-gm-e67.h b/firmware/controllers/generated/signature_hellen-gm-e67.h index 77f44a591b..7b25a2987c 100644 --- a/firmware/controllers/generated/signature_hellen-gm-e67.h +++ b/firmware/controllers/generated/signature_hellen-gm-e67.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1999487331 -#define TS_SIGNATURE "rusEFI master.2023.07.19.hellen-gm-e67.1999487331" +#define SIGNATURE_HASH 2931024025 +#define TS_SIGNATURE "rusEFI master.2023.07.19.hellen-gm-e67.2931024025" diff --git a/firmware/controllers/generated/signature_hellen-honda-k.h b/firmware/controllers/generated/signature_hellen-honda-k.h index a5f3f224a0..f3837395f4 100644 --- a/firmware/controllers/generated/signature_hellen-honda-k.h +++ b/firmware/controllers/generated/signature_hellen-honda-k.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2701112647 -#define TS_SIGNATURE "rusEFI master.2023.07.19.hellen-honda-k.2701112647" +#define SIGNATURE_HASH 2036438205 +#define TS_SIGNATURE "rusEFI master.2023.07.19.hellen-honda-k.2036438205" diff --git a/firmware/controllers/generated/signature_hellen-nb1.h b/firmware/controllers/generated/signature_hellen-nb1.h index b49f332011..1e3977af25 100644 --- a/firmware/controllers/generated/signature_hellen-nb1.h +++ b/firmware/controllers/generated/signature_hellen-nb1.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 4200163829 -#define TS_SIGNATURE "rusEFI master.2023.07.19.hellen-nb1.4200163829" +#define SIGNATURE_HASH 600262671 +#define TS_SIGNATURE "rusEFI master.2023.07.19.hellen-nb1.600262671" diff --git a/firmware/controllers/generated/signature_hellen121nissan.h b/firmware/controllers/generated/signature_hellen121nissan.h index bfe6ecce08..f37dc44e63 100644 --- a/firmware/controllers/generated/signature_hellen121nissan.h +++ b/firmware/controllers/generated/signature_hellen121nissan.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2914324689 -#define TS_SIGNATURE "rusEFI master.2023.07.19.hellen121nissan.2914324689" +#define SIGNATURE_HASH 1948987691 +#define TS_SIGNATURE "rusEFI master.2023.07.19.hellen121nissan.1948987691" diff --git a/firmware/controllers/generated/signature_hellen121vag.h b/firmware/controllers/generated/signature_hellen121vag.h index 783c56125b..e4dd8154d9 100644 --- a/firmware/controllers/generated/signature_hellen121vag.h +++ b/firmware/controllers/generated/signature_hellen121vag.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1403086928 -#define TS_SIGNATURE "rusEFI master.2023.07.19.hellen121vag.1403086928" +#define SIGNATURE_HASH 2319403434 +#define TS_SIGNATURE "rusEFI master.2023.07.19.hellen121vag.2319403434" diff --git a/firmware/controllers/generated/signature_hellen128.h b/firmware/controllers/generated/signature_hellen128.h index 72265403bd..d02266ec6f 100644 --- a/firmware/controllers/generated/signature_hellen128.h +++ b/firmware/controllers/generated/signature_hellen128.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3870142469 -#define TS_SIGNATURE "rusEFI master.2023.07.19.hellen128.3870142469" +#define SIGNATURE_HASH 1060344319 +#define TS_SIGNATURE "rusEFI master.2023.07.19.hellen128.1060344319" diff --git a/firmware/controllers/generated/signature_hellen154hyundai.h b/firmware/controllers/generated/signature_hellen154hyundai.h index 1b6ace776e..d31712e810 100644 --- a/firmware/controllers/generated/signature_hellen154hyundai.h +++ b/firmware/controllers/generated/signature_hellen154hyundai.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2678395294 -#define TS_SIGNATURE "rusEFI master.2023.07.19.hellen154hyundai.2678395294" +#define SIGNATURE_HASH 1178284132 +#define TS_SIGNATURE "rusEFI master.2023.07.19.hellen154hyundai.1178284132" diff --git a/firmware/controllers/generated/signature_hellen72.h b/firmware/controllers/generated/signature_hellen72.h index f49980b81a..8be17e31b4 100644 --- a/firmware/controllers/generated/signature_hellen72.h +++ b/firmware/controllers/generated/signature_hellen72.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2879091134 -#define TS_SIGNATURE "rusEFI master.2023.07.19.hellen72.2879091134" +#define SIGNATURE_HASH 1912950852 +#define TS_SIGNATURE "rusEFI master.2023.07.19.hellen72.1912950852" diff --git a/firmware/controllers/generated/signature_hellen81.h b/firmware/controllers/generated/signature_hellen81.h index dc5a405abe..2efed7650d 100644 --- a/firmware/controllers/generated/signature_hellen81.h +++ b/firmware/controllers/generated/signature_hellen81.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 814740350 -#define TS_SIGNATURE "rusEFI master.2023.07.19.hellen81.814740350" +#define SIGNATURE_HASH 3910259332 +#define TS_SIGNATURE "rusEFI master.2023.07.19.hellen81.3910259332" diff --git a/firmware/controllers/generated/signature_hellen88bmw.h b/firmware/controllers/generated/signature_hellen88bmw.h index cfe6358489..b59544bc79 100644 --- a/firmware/controllers/generated/signature_hellen88bmw.h +++ b/firmware/controllers/generated/signature_hellen88bmw.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 293286306 -#define TS_SIGNATURE "rusEFI master.2023.07.19.hellen88bmw.293286306" +#define SIGNATURE_HASH 3370455128 +#define TS_SIGNATURE "rusEFI master.2023.07.19.hellen88bmw.3370455128" diff --git a/firmware/controllers/generated/signature_hellenNA6.h b/firmware/controllers/generated/signature_hellenNA6.h index 2380787dad..73e6b2ce29 100644 --- a/firmware/controllers/generated/signature_hellenNA6.h +++ b/firmware/controllers/generated/signature_hellenNA6.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 752020407 -#define TS_SIGNATURE "rusEFI master.2023.07.19.hellenNA6.752020407" +#define SIGNATURE_HASH 4115450445 +#define TS_SIGNATURE "rusEFI master.2023.07.19.hellenNA6.4115450445" diff --git a/firmware/controllers/generated/signature_hellenNA8_96.h b/firmware/controllers/generated/signature_hellenNA8_96.h index 2c2c3cbd9b..4e403d0e58 100644 --- a/firmware/controllers/generated/signature_hellenNA8_96.h +++ b/firmware/controllers/generated/signature_hellenNA8_96.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2584311994 -#define TS_SIGNATURE "rusEFI master.2023.07.19.hellenNA8_96.2584311994" +#define SIGNATURE_HASH 1133992256 +#define TS_SIGNATURE "rusEFI master.2023.07.19.hellenNA8_96.1133992256" diff --git a/firmware/controllers/generated/signature_kin.h b/firmware/controllers/generated/signature_kin.h index 35d36ccf7e..6898b26ddb 100644 --- a/firmware/controllers/generated/signature_kin.h +++ b/firmware/controllers/generated/signature_kin.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on kinetis_gen_config.bat by SignatureConsumer // -#define SIGNATURE_HASH 2936591711 -#define TS_SIGNATURE "rusEFI master.2023.07.19.kin.2936591711" +#define SIGNATURE_HASH 1989604517 +#define TS_SIGNATURE "rusEFI master.2023.07.19.kin.1989604517" diff --git a/firmware/controllers/generated/signature_m74_9.h b/firmware/controllers/generated/signature_m74_9.h index a454b53420..5c140d8430 100644 --- a/firmware/controllers/generated/signature_m74_9.h +++ b/firmware/controllers/generated/signature_m74_9.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3722734493 -#define TS_SIGNATURE "rusEFI master.2023.07.19.m74_9.3722734493" +#define SIGNATURE_HASH 75123303 +#define TS_SIGNATURE "rusEFI master.2023.07.19.m74_9.75123303" diff --git a/firmware/controllers/generated/signature_mre_f4.h b/firmware/controllers/generated/signature_mre_f4.h index ce30d1ddf3..6188a09e3b 100644 --- a/firmware/controllers/generated/signature_mre_f4.h +++ b/firmware/controllers/generated/signature_mre_f4.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 4180350228 -#define TS_SIGNATURE "rusEFI master.2023.07.19.mre_f4.4180350228" +#define SIGNATURE_HASH 548746478 +#define TS_SIGNATURE "rusEFI master.2023.07.19.mre_f4.548746478" diff --git a/firmware/controllers/generated/signature_mre_f7.h b/firmware/controllers/generated/signature_mre_f7.h index 837cfe79a0..bf2d5f43fb 100644 --- a/firmware/controllers/generated/signature_mre_f7.h +++ b/firmware/controllers/generated/signature_mre_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 4180350228 -#define TS_SIGNATURE "rusEFI master.2023.07.19.mre_f7.4180350228" +#define SIGNATURE_HASH 548746478 +#define TS_SIGNATURE "rusEFI master.2023.07.19.mre_f7.548746478" diff --git a/firmware/controllers/generated/signature_nucleo_f429.h b/firmware/controllers/generated/signature_nucleo_f429.h index ed573ab247..69e2325dc5 100644 --- a/firmware/controllers/generated/signature_nucleo_f429.h +++ b/firmware/controllers/generated/signature_nucleo_f429.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3353311123 -#define TS_SIGNATURE "rusEFI master.2023.07.19.nucleo_f429.3353311123" +#define SIGNATURE_HASH 507598441 +#define TS_SIGNATURE "rusEFI master.2023.07.19.nucleo_f429.507598441" diff --git a/firmware/controllers/generated/signature_nucleo_f767.h b/firmware/controllers/generated/signature_nucleo_f767.h index a62404112c..43387b4ad0 100644 --- a/firmware/controllers/generated/signature_nucleo_f767.h +++ b/firmware/controllers/generated/signature_nucleo_f767.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3353311123 -#define TS_SIGNATURE "rusEFI master.2023.07.19.nucleo_f767.3353311123" +#define SIGNATURE_HASH 507598441 +#define TS_SIGNATURE "rusEFI master.2023.07.19.nucleo_f767.507598441" diff --git a/firmware/controllers/generated/signature_nucleo_h743.h b/firmware/controllers/generated/signature_nucleo_h743.h index f911e71f67..512c2fb68d 100644 --- a/firmware/controllers/generated/signature_nucleo_h743.h +++ b/firmware/controllers/generated/signature_nucleo_h743.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3353311123 -#define TS_SIGNATURE "rusEFI master.2023.07.19.nucleo_h743.3353311123" +#define SIGNATURE_HASH 507598441 +#define TS_SIGNATURE "rusEFI master.2023.07.19.nucleo_h743.507598441" diff --git a/firmware/controllers/generated/signature_prometheus_405.h b/firmware/controllers/generated/signature_prometheus_405.h index cde2a9fa40..a21909c8a9 100644 --- a/firmware/controllers/generated/signature_prometheus_405.h +++ b/firmware/controllers/generated/signature_prometheus_405.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 4148935171 -#define TS_SIGNATURE "rusEFI master.2023.07.19.prometheus_405.4148935171" +#define SIGNATURE_HASH 785751033 +#define TS_SIGNATURE "rusEFI master.2023.07.19.prometheus_405.785751033" diff --git a/firmware/controllers/generated/signature_prometheus_469.h b/firmware/controllers/generated/signature_prometheus_469.h index e39a07f5c1..ce4e96bac1 100644 --- a/firmware/controllers/generated/signature_prometheus_469.h +++ b/firmware/controllers/generated/signature_prometheus_469.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 4148935171 -#define TS_SIGNATURE "rusEFI master.2023.07.19.prometheus_469.4148935171" +#define SIGNATURE_HASH 785751033 +#define TS_SIGNATURE "rusEFI master.2023.07.19.prometheus_469.785751033" diff --git a/firmware/controllers/generated/signature_proteus_f4.h b/firmware/controllers/generated/signature_proteus_f4.h index aafc037573..a4ddd108ea 100644 --- a/firmware/controllers/generated/signature_proteus_f4.h +++ b/firmware/controllers/generated/signature_proteus_f4.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3097098038 -#define TS_SIGNATURE "rusEFI master.2023.07.19.proteus_f4.3097098038" +#define SIGNATURE_HASH 1627903692 +#define TS_SIGNATURE "rusEFI master.2023.07.19.proteus_f4.1627903692" diff --git a/firmware/controllers/generated/signature_proteus_f7.h b/firmware/controllers/generated/signature_proteus_f7.h index ddfcb9e4c1..a271cf76d9 100644 --- a/firmware/controllers/generated/signature_proteus_f7.h +++ b/firmware/controllers/generated/signature_proteus_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3097098038 -#define TS_SIGNATURE "rusEFI master.2023.07.19.proteus_f7.3097098038" +#define SIGNATURE_HASH 1627903692 +#define TS_SIGNATURE "rusEFI master.2023.07.19.proteus_f7.1627903692" diff --git a/firmware/controllers/generated/signature_proteus_h7.h b/firmware/controllers/generated/signature_proteus_h7.h index 4dad6b9107..59cd5a3fb2 100644 --- a/firmware/controllers/generated/signature_proteus_h7.h +++ b/firmware/controllers/generated/signature_proteus_h7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3097098038 -#define TS_SIGNATURE "rusEFI master.2023.07.19.proteus_h7.3097098038" +#define SIGNATURE_HASH 1627903692 +#define TS_SIGNATURE "rusEFI master.2023.07.19.proteus_h7.1627903692" diff --git a/firmware/controllers/generated/signature_s105.h b/firmware/controllers/generated/signature_s105.h index 127ad0d49a..2ca90ce48a 100644 --- a/firmware/controllers/generated/signature_s105.h +++ b/firmware/controllers/generated/signature_s105.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2743374543 -#define TS_SIGNATURE "rusEFI master.2023.07.19.s105.2743374543" +#define SIGNATURE_HASH 2048570165 +#define TS_SIGNATURE "rusEFI master.2023.07.19.s105.2048570165" diff --git a/firmware/controllers/generated/signature_small-can.h b/firmware/controllers/generated/signature_small-can.h index 399e47ac57..625786a915 100644 --- a/firmware/controllers/generated/signature_small-can.h +++ b/firmware/controllers/generated/signature_small-can.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 760093623 -#define TS_SIGNATURE "rusEFI master.2023.07.19.small-can.760093623" +#define SIGNATURE_HASH 4107287117 +#define TS_SIGNATURE "rusEFI master.2023.07.19.small-can.4107287117" diff --git a/firmware/controllers/generated/signature_subaru_eg33_f7.h b/firmware/controllers/generated/signature_subaru_eg33_f7.h index 1c3d7bf8ef..713090b214 100644 --- a/firmware/controllers/generated/signature_subaru_eg33_f7.h +++ b/firmware/controllers/generated/signature_subaru_eg33_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3226644612 -#define TS_SIGNATURE "rusEFI master.2023.07.19.subaru_eg33_f7.3226644612" +#define SIGNATURE_HASH 432836990 +#define TS_SIGNATURE "rusEFI master.2023.07.19.subaru_eg33_f7.432836990" diff --git a/firmware/controllers/generated/signature_t-b-g.h b/firmware/controllers/generated/signature_t-b-g.h index 6980476098..e2f9796b9c 100644 --- a/firmware/controllers/generated/signature_t-b-g.h +++ b/firmware/controllers/generated/signature_t-b-g.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3353311123 -#define TS_SIGNATURE "rusEFI master.2023.07.19.t-b-g.3353311123" +#define SIGNATURE_HASH 507598441 +#define TS_SIGNATURE "rusEFI master.2023.07.19.t-b-g.507598441" diff --git a/firmware/controllers/generated/signature_tdg-pdm8.h b/firmware/controllers/generated/signature_tdg-pdm8.h index eb2fbe571b..8c37300cce 100644 --- a/firmware/controllers/generated/signature_tdg-pdm8.h +++ b/firmware/controllers/generated/signature_tdg-pdm8.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1299274673 -#define TS_SIGNATURE "rusEFI master.2023.07.19.tdg-pdm8.1299274673" +#define SIGNATURE_HASH 2498722379 +#define TS_SIGNATURE "rusEFI master.2023.07.19.tdg-pdm8.2498722379" diff --git a/firmware/tunerstudio/generated/rusefi.ini b/firmware/tunerstudio/generated/rusefi.ini index 9dbdcf538c..3000ff8567 100644 --- a/firmware/tunerstudio/generated/rusefi.ini +++ b/firmware/tunerstudio/generated/rusefi.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.f407-discovery.1690822056" + signature = "rusEFI master.2023.07.19.f407-discovery.3176776786" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.f407-discovery.1690822056" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.f407-discovery.3176776786" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 15:00:00 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:30:54 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_48way.ini b/firmware/tunerstudio/generated/rusefi_48way.ini index bb0e75e9b3..349d343107 100644 --- a/firmware/tunerstudio/generated/rusefi_48way.ini +++ b/firmware/tunerstudio/generated/rusefi_48way.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.48way.2198208297" + signature = "rusEFI master.2023.07.19.48way.1520164563" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.48way.2198208297" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.48way.1520164563" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","Battery Reference Input (A0)","TPS Reference Input (A1)","CLT Reference Input (A2)","IAT Reference Input (A3)","O2 Reference Input (A4)","INVALID","INVALID","INVALID","MAP Pressure Reference Input (B0)","BARO Pressure Reference Input (B1)","INVALID","INVALID","INVALID","INVALID","Fuel Pressure Reference Input (C4)","Oil Pressure Reference Input (C5)" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:59:08 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:30:13 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini b/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini index ad6c787f35..0ee25cc5f2 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.alphax-2chan.3209567126" + signature = "rusEFI master.2023.07.19.alphax-2chan.1724922476" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.alphax-2chan.3209567126" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.alphax-2chan.1724922476" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","B4 - O2","On-board MAP","INVALID","B5 - TPS","A2 Battery Sense","C7 - CAM Hall/Digital","INVALID","INVALID","INVALID","INVALID","B2 - MAP","B7 - CLT","B3 - IAT" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:58:03 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:29:20 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini b/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini index fe195785c6..40cc6d8e45 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.alphax-4chan.3837704058" + signature = "rusEFI master.2023.07.19.alphax-4chan.1025545856" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.alphax-4chan.3837704058" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.alphax-4chan.1025545856" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","B4 - O2","On-board MAP","D5 - PPS","B5 - TPS","F7 - Ignition Key Voltage","C7 - CAM Hall/Digital","INVALID","D4 - TPS2","INVALID","X5 - AIN3","B2 - MAP","B7 - CLT","B3 - IAT","F6 - PPS2","X5 - AIN4","INVALID","INVALID","INVALID","INVALID","D5 - PPS rev G" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:58:06 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:29:23 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_alphax-4chan_f7.ini b/firmware/tunerstudio/generated/rusefi_alphax-4chan_f7.ini index a1a6ec3563..8ccb92eec5 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-4chan_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-4chan_f7.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.alphax-4chan_f7.3837704058" + signature = "rusEFI master.2023.07.19.alphax-4chan_f7.1025545856" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.alphax-4chan_f7.3837704058" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.alphax-4chan_f7.1025545856" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","B4 - O2","On-board MAP","D5 - PPS","B5 - TPS","F7 - Ignition Key Voltage","C7 - CAM Hall/Digital","INVALID","D4 - TPS2","INVALID","X5 - AIN3","B2 - MAP","B7 - CLT","B3 - IAT","F6 - PPS2","X5 - AIN4","INVALID","INVALID","INVALID","INVALID","D5 - PPS rev G" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:58:09 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:29:26 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_alphax-8chan.ini b/firmware/tunerstudio/generated/rusefi_alphax-8chan.ini index 6210e4c207..2b9d75f9cf 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-8chan.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-8chan.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.alphax-8chan.4130122128" + signature = "rusEFI master.2023.07.19.alphax-8chan.800229482" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.alphax-8chan.4130122128" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.alphax-8chan.800229482" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","INVALID","INVALID","17A - PPS","23C - TPS","Battery Sense","INVALID","15D - AN5","24C - TPS2","14A - Analog 1","22A - Analog 22","On-board MAP","16A - CLT","15A - IAT","31C - PPS2","33A - AN3","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","16D - AN6","INVALID","INVALID","INVALID","INVALID","7C - AT4","INVALID","6C - AT3","14D - AN4" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:58:12 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:29:28 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_alphax-8chan_f7.ini b/firmware/tunerstudio/generated/rusefi_alphax-8chan_f7.ini index a597d1289c..94422c69d7 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-8chan_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-8chan_f7.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.alphax-8chan_f7.4130122128" + signature = "rusEFI master.2023.07.19.alphax-8chan_f7.800229482" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.alphax-8chan_f7.4130122128" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.alphax-8chan_f7.800229482" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","INVALID","INVALID","17A - PPS","23C - TPS","Battery Sense","INVALID","15D - AN5","24C - TPS2","14A - Analog 1","22A - Analog 22","On-board MAP","16A - CLT","15A - IAT","31C - PPS2","33A - AN3","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","16D - AN6","INVALID","INVALID","INVALID","INVALID","7C - AT4","INVALID","6C - AT3","14D - AN4" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:58:15 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:29:30 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_atlas.ini b/firmware/tunerstudio/generated/rusefi_atlas.ini index 845cee6299..632cc1cdb5 100644 --- a/firmware/tunerstudio/generated/rusefi_atlas.ini +++ b/firmware/tunerstudio/generated/rusefi_atlas.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.atlas.3675620020" + signature = "rusEFI master.2023.07.19.atlas.42705742" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.atlas.3675620020" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.atlas.42705742" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:59:48 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:30:45 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_core8.ini b/firmware/tunerstudio/generated/rusefi_core8.ini index 4560456ecc..ca6e550966 100644 --- a/firmware/tunerstudio/generated/rusefi_core8.ini +++ b/firmware/tunerstudio/generated/rusefi_core8.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.core8.4294474277" + signature = "rusEFI master.2023.07.19.core8.644242399" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.core8.4294474277" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.core8.644242399" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","On-board Battery Sense (A0)","Analog Inputs 1 (A1)","Analog Inputs 2 (A2)","Analog Inputs 3 (A3)","Analog Inputs 4 (A4)","On-board MAP (A5)","Analog Inputs 6 (A6)","Analog Inputs 7 (A7)","On-board BARO (B0)","Analog Inputs 9 (B1)","Analog Inputs 10 (C0)","Primary On-board O2 (C1)","Secondary On-board O2 (C2)","Analog Inputs 13 (C3)","Analog Inputs 14 (C4)","Analog Inputs 15 (C5)" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:59:05 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:30:11 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_cypress.ini b/firmware/tunerstudio/generated/rusefi_cypress.ini index 489e45a963..c280c23239 100644 --- a/firmware/tunerstudio/generated/rusefi_cypress.ini +++ b/firmware/tunerstudio/generated/rusefi_cypress.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.cypress.3353311123" + signature = "rusEFI master.2023.07.19.cypress.507598441" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.cypress.3353311123" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.cypress.507598441" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:57:58 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:29:17 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_f407-discovery.ini b/firmware/tunerstudio/generated/rusefi_f407-discovery.ini index 2d18e823bb..d50fbc1269 100644 --- a/firmware/tunerstudio/generated/rusefi_f407-discovery.ini +++ b/firmware/tunerstudio/generated/rusefi_f407-discovery.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.f407-discovery.1690822056" + signature = "rusEFI master.2023.07.19.f407-discovery.3176776786" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.f407-discovery.1690822056" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.f407-discovery.3176776786" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:59:54 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:30:50 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_f429-discovery.ini b/firmware/tunerstudio/generated/rusefi_f429-discovery.ini index 4e679b4cde..1739982e41 100644 --- a/firmware/tunerstudio/generated/rusefi_f429-discovery.ini +++ b/firmware/tunerstudio/generated/rusefi_f429-discovery.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.f429-discovery.3353311123" + signature = "rusEFI master.2023.07.19.f429-discovery.507598441" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.f429-discovery.3353311123" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.f429-discovery.507598441" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:59:37 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:30:36 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini b/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini index bbad58c8db..c8b2969fb3 100644 --- a/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini +++ b/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.frankenso_na6.3851261785" + signature = "rusEFI master.2023.07.19.frankenso_na6.1007924899" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.frankenso_na6.3851261785" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.frankenso_na6.1007924899" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","Analog 3O","Analog 3L","Analog 3M","Analog 3J","Analog 3I","INVALID","Analog 3H","Analog 3G","INVALID","INVALID","INVALID","Analog 3P","Analog 3Q","Analog 3N","Analog VBatt","Analog 3E" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:59:19 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:30:23 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_harley81.ini b/firmware/tunerstudio/generated/rusefi_harley81.ini index 48963fe07c..d24cd9d4e3 100644 --- a/firmware/tunerstudio/generated/rusefi_harley81.ini +++ b/firmware/tunerstudio/generated/rusefi_harley81.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.harley81.321338074" + signature = "rusEFI master.2023.07.19.harley81.3401128736" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.harley81.321338074" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.harley81.3401128736" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","27 - TPS 2","INVALID","41 - PPS 1","52 - TPS 1","5 Battery Sense","INVALID","INVALID","42 - PPS 2","INVALID","53 - MAP","55 Engine Temperature","49 CLT","72 IAT","32 Oil Pressure","34 Kickstand Position Sensor" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:58:18 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:29:33 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini b/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini index 561ecc4709..32d0a120dc 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.hellen-gm-e67.1999487331" + signature = "rusEFI master.2023.07.19.hellen-gm-e67.2931024025" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.hellen-gm-e67.1999487331" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.hellen-gm-e67.2931024025" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","C2-60 - Oil Pressure","C3-58 - Baro","C1-47 - PPS1","C2-64 - TPS1","C1-19 Battery Sense","C1-45 Secondary Fuel Level","C3-57 - A/C Pressure","C2-66 - TPS2","C1-44 Primary Fuel Level","C2-65 - Trans Fluids","C3-59 - MAP","C3-55 - CLT","C3-56 - IAT","C1-49 - PPS2","C1-46 Vac Sense" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:58:47 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:29:57 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_hellen-honda-k.ini b/firmware/tunerstudio/generated/rusefi_hellen-honda-k.ini index fb4f7c70f4..713ed8c1bc 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen-honda-k.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen-honda-k.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.hellen-honda-k.2701112647" + signature = "rusEFI master.2023.07.19.hellen-honda-k.2036438205" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.hellen-honda-k.2701112647" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.hellen-honda-k.2036438205" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","INVALID","INVALID","INVALID","A15 TPS","E9 Ignition Key Voltage","INVALID","INVALID","INVALID","INVALID","A19 - MAP","INVALID","B8 - CLT","B17 IAT" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:16:51 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:29:42 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini b/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini index b3b65c6334..7245fbad4a 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.hellen-nb1.4200163829" + signature = "rusEFI master.2023.07.19.hellen-nb1.600262671" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.hellen-nb1.4200163829" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.hellen-nb1.600262671" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","2C - O2S","TPS1","intMAP","1G - Steering/RES2","3E - TPS","1B - Battery Sense","2H - CAM","3S - EGR BOOST IN","2A - Pressure Input","2J - CRANK","2L - MAF","3D - MAP","2E - Coolant","2B - IAT","4C - IN TEMP/PPS2","1P - AC Switch" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:58:45 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:29:55 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini b/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini index 1590a0e792..681af22219 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.hellen121nissan.2914324689" + signature = "rusEFI master.2023.07.19.hellen121nissan.1948987691" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.hellen121nissan.2914324689" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.hellen121nissan.1948987691" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","51 - MAF","INVALID","Aux P68","106 - PPS 1","50 - TPS 1","109 Ignition Key Voltage","INVALID","INVALID","69 - TPS 2","INVALID","Aux P66","Aux P67","73 - CLT","34 - IAT","98 - PPS 2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:58:27 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:29:40 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_hellen121vag.ini b/firmware/tunerstudio/generated/rusefi_hellen121vag.ini index 1c9722cf17..b7e5194359 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen121vag.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen121vag.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.hellen121vag.1403086928" + signature = "rusEFI master.2023.07.19.hellen121vag.2319403434" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.hellen121vag.1403086928" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.hellen121vag.2319403434" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","14 - O2","INVALID","INVALID","34 In PPS1","92 - TPS 1","106 - KNOCK","86 - CAM1","87 - CAM2","84 - TPS2","INVALID","29 In Maf","101 - MAP2","93 - CLT","85 - IAT","35 In PPS2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:58:24 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:29:38 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini b/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini index 8b45f1d493..be4f43e780 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.hellen128.3870142469" + signature = "rusEFI master.2023.07.19.hellen128.1060344319" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.hellen128.3870142469" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.hellen128.1060344319" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","P36_IN_O2S","P32_IN_O2S2","P40_IN_MAP3","C24 - PPS1","E31 - TPS1","Battery Sense","E40 - IN_CAM","P30_IN_AUX4","E34 - TPS2","E37 - Crank Input","E47 - MAF","E23 - MAP","E29 - Coolant Temp","E45 - IAT","C25 - PPS2","P41_IN_AUX3" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:58:21 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:29:35 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini b/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini index 8f60659735..01da554d7a 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.hellen154hyundai.2678395294" + signature = "rusEFI master.2023.07.19.hellen154hyundai.1178284132" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.hellen154hyundai.2678395294" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.hellen154hyundai.1178284132" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","K21 Ambient Temperature","K58 Oil Temp","A/C pressure","PPS 1","TPS 1","K2 Ignition Key Voltage","X10 AIN2","INVALID","TPS 2","X11 AIN1","Map Sensor K31","K10 Sensor","CLT","IAT","PPS 2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:58:33 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:29:45 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_hellen72.ini b/firmware/tunerstudio/generated/rusefi_hellen72.ini index 21d1f2c6e1..4525ed4ad0 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen72.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen72.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.hellen72.2879091134" + signature = "rusEFI master.2023.07.19.hellen72.1912950852" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.hellen72.2879091134" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.hellen72.1912950852" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","5N - TPS2","3L - IGN_7 / AFR","intMAP (A15)","5P - PPS1","4V - TPS (A17)","4S/4T - Alternator voltage","3V - CAM (A19)","4J - VTCS/AUX4 (A20)","4F - AC_PRES/AUX1 (A23)","3Y - CRANK (A24)","4X - MAF (A9)","4U - MAP2/Ign8 (A10)","4P - CLT (A11)","4N - IAT (A14)","5M - PPS2 OR TEMPERATURE SENSOR","4AE - EGR/MAP4 (A22)" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:58:39 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:29:50 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_hellen81.ini b/firmware/tunerstudio/generated/rusefi_hellen81.ini index b5277e9ee0..fbce7f1421 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen81.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen81.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.hellen81.814740350" + signature = "rusEFI master.2023.07.19.hellen81.3910259332" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.hellen81.814740350" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.hellen81.3910259332" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","18 - IN_O2S","55 - IN_O2S2","41 - IN_MAP3","78 - IN_PPS","16 - IN_TPS","13 - IN_VIGN","79 - IN_CAM","77 - IN_AUX4","74 - IN_AUX1","15 - IN_CRANK (A24)","37 - IN_MAP1","38 - IN_MAP2","39 - IN_CLT","40 - IN_IAT","75 - IN_AUX2","76 - IN_AUX3" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:58:42 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:29:52 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini b/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini index 57ec45791f..edbe16c55d 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.hellen88bmw.293286306" + signature = "rusEFI master.2023.07.19.hellen88bmw.3370455128" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.hellen88bmw.293286306" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.hellen88bmw.3370455128" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","VIN5","VIN6","INVALID","PPS1","73 - TPS","56 - Battery Sense","17 - CAM","Aux BARO","Aux TPS2","16 - CRANK","41 - MAF","Aux MAP","78 - CLT","77 - IAT","Aux PPS2","Aux TPS3" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:58:36 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:29:47 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_hellenNA6.ini b/firmware/tunerstudio/generated/rusefi_hellenNA6.ini index 1eb8243e45..3aaa3c4595 100644 --- a/firmware/tunerstudio/generated/rusefi_hellenNA6.ini +++ b/firmware/tunerstudio/generated/rusefi_hellenNA6.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.hellenNA6.752020407" + signature = "rusEFI master.2023.07.19.hellenNA6.4115450445" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.hellenNA6.752020407" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.hellenNA6.4115450445" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","3N - O2S","2N - Temperature Sensor","intMAP (A15)","4I - PPS1","TPS Input","1B - Battery Sense","INVALID","4G - PPS2 OR TEMPERATURE SENSOR","4H - TPS2","INVALID","3O - MAF","2M - Pressure Sensor","3Q - CLT","3P - IAT","1V - Clutch Switch","1Q AC Switch" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:58:50 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:29:59 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini b/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini index 4617f6d46e..e3d607329f 100644 --- a/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini +++ b/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.hellenNA8_96.2584311994" + signature = "rusEFI master.2023.07.19.hellenNA8_96.1133992256" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.hellenNA8_96.2584311994" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.hellenNA8_96.1133992256" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","2C - O2S","TPS1","intMAP","PPS1","2F - TPS","3B - Battery Sense","3G - CAM","3S - EGR BOOST IN","2A - Pressure Input","3F - CRANK","2B - MAF","INVALID","2G - Coolant","2B - IAT","4C - IN TEMP/PPS2","1K - AC Switch" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:58:53 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:30:02 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_kin.ini b/firmware/tunerstudio/generated/rusefi_kin.ini index a30f805486..dcf53602d1 100644 --- a/firmware/tunerstudio/generated/rusefi_kin.ini +++ b/firmware/tunerstudio/generated/rusefi_kin.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.kin.2936591711" + signature = "rusEFI master.2023.07.19.kin.1989604517" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.kin.2936591711" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.kin.1989604517" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA2", "PA3", "INVALID", "PD3", "INVALID", "INVALID", "INVALID", "PB12", "PB13", "INVALID", "PE2", "INVALID", "PC14", "PC15", "PC16", "PC17" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:57:57 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:29:16 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_m74_9.ini b/firmware/tunerstudio/generated/rusefi_m74_9.ini index c0b14f2340..1d84644a8d 100644 --- a/firmware/tunerstudio/generated/rusefi_m74_9.ini +++ b/firmware/tunerstudio/generated/rusefi_m74_9.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.m74_9.3722734493" + signature = "rusEFI master.2023.07.19.m74_9.75123303" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.m74_9.3722734493" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.m74_9.75123303" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:59:11 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:30:16 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_mre_f4.ini b/firmware/tunerstudio/generated/rusefi_mre_f4.ini index 2ce4e02d51..6a618d595d 100644 --- a/firmware/tunerstudio/generated/rusefi_mre_f4.ini +++ b/firmware/tunerstudio/generated/rusefi_mre_f4.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.mre_f4.4180350228" + signature = "rusEFI master.2023.07.19.mre_f4.548746478" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.mre_f4.4180350228" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.mre_f4.548746478" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","18 - AN temp 1","23 - AN temp 2","24 - AN temp 3","22 - AN temp 4","28 - AN volt 10, Aux Reuse","INVALID","26 - AN volt 2","31 - AN volt 3","36 - AN volt 8, Aux Reuse","40 - AN volt 9, Aux Reuse","27 - AN volt 1","Battery Sense","19 - AN volt 4","20 - AN volt 5","32 - AN volt 6, Aux Reuse","30 - AN volt 7" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:59:02 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:30:09 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_mre_f7.ini b/firmware/tunerstudio/generated/rusefi_mre_f7.ini index 9337488f47..64441cb8d3 100644 --- a/firmware/tunerstudio/generated/rusefi_mre_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_mre_f7.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.mre_f7.4180350228" + signature = "rusEFI master.2023.07.19.mre_f7.548746478" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.mre_f7.4180350228" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.mre_f7.548746478" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","18 - AN temp 1","23 - AN temp 2","24 - AN temp 3","22 - AN temp 4","28 - AN volt 10, Aux Reuse","INVALID","26 - AN volt 2","31 - AN volt 3","36 - AN volt 8, Aux Reuse","40 - AN volt 9, Aux Reuse","27 - AN volt 1","Battery Sense","19 - AN volt 4","20 - AN volt 5","32 - AN volt 6, Aux Reuse","30 - AN volt 7" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:58:59 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:30:06 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_nucleo_f429.ini b/firmware/tunerstudio/generated/rusefi_nucleo_f429.ini index de1f64df9a..3a0d330d95 100644 --- a/firmware/tunerstudio/generated/rusefi_nucleo_f429.ini +++ b/firmware/tunerstudio/generated/rusefi_nucleo_f429.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.nucleo_f429.3353311123" + signature = "rusEFI master.2023.07.19.nucleo_f429.507598441" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.nucleo_f429.3353311123" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.nucleo_f429.507598441" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:59:39 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:30:39 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_nucleo_f767.ini b/firmware/tunerstudio/generated/rusefi_nucleo_f767.ini index d63de4543f..9dffb59f49 100644 --- a/firmware/tunerstudio/generated/rusefi_nucleo_f767.ini +++ b/firmware/tunerstudio/generated/rusefi_nucleo_f767.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.nucleo_f767.3353311123" + signature = "rusEFI master.2023.07.19.nucleo_f767.507598441" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.nucleo_f767.3353311123" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.nucleo_f767.507598441" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:59:42 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:30:41 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_nucleo_h743.ini b/firmware/tunerstudio/generated/rusefi_nucleo_h743.ini index 488517a85b..95ddbce59b 100644 --- a/firmware/tunerstudio/generated/rusefi_nucleo_h743.ini +++ b/firmware/tunerstudio/generated/rusefi_nucleo_h743.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.nucleo_h743.3353311123" + signature = "rusEFI master.2023.07.19.nucleo_h743.507598441" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.nucleo_h743.3353311123" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.nucleo_h743.507598441" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:59:45 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:30:43 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_prometheus_405.ini b/firmware/tunerstudio/generated/rusefi_prometheus_405.ini index 791a998914..4a864fa58c 100644 --- a/firmware/tunerstudio/generated/rusefi_prometheus_405.ini +++ b/firmware/tunerstudio/generated/rusefi_prometheus_405.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.prometheus_405.4148935171" + signature = "rusEFI master.2023.07.19.prometheus_405.785751033" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.prometheus_405.4148935171" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.prometheus_405.785751033" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:59:25 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:30:27 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_prometheus_469.ini b/firmware/tunerstudio/generated/rusefi_prometheus_469.ini index 393b8e1b8a..2ac62b417c 100644 --- a/firmware/tunerstudio/generated/rusefi_prometheus_469.ini +++ b/firmware/tunerstudio/generated/rusefi_prometheus_469.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.prometheus_469.4148935171" + signature = "rusEFI master.2023.07.19.prometheus_469.785751033" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.prometheus_469.4148935171" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.prometheus_469.785751033" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:59:22 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:30:25 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_proteus_f4.ini b/firmware/tunerstudio/generated/rusefi_proteus_f4.ini index bf7291af0f..f8d3d9197a 100644 --- a/firmware/tunerstudio/generated/rusefi_proteus_f4.ini +++ b/firmware/tunerstudio/generated/rusefi_proteus_f4.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.proteus_f4.3097098038" + signature = "rusEFI master.2023.07.19.proteus_f4.1627903692" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.proteus_f4.3097098038" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.proteus_f4.1627903692" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","Analog Volt 5","Analog Volt 6","Analog Volt 7","Analog Volt 8","Analog Volt 9","Analog Volt 10","Analog Volt 11","Battery Sense","Analog Temp 3","Analog Temp 4","Analog Volt 1","Analog Volt 2","Analog Volt 3","Analog Volt 4","Analog Temp 1","Analog Temp 2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:59:31 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:30:32 UTC 2023 pageSize = 27468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 27458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_proteus_f7.ini b/firmware/tunerstudio/generated/rusefi_proteus_f7.ini index cc7ead2532..d947fa1029 100644 --- a/firmware/tunerstudio/generated/rusefi_proteus_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_proteus_f7.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.proteus_f7.3097098038" + signature = "rusEFI master.2023.07.19.proteus_f7.1627903692" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.proteus_f7.3097098038" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.proteus_f7.1627903692" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","Analog Volt 5","Analog Volt 6","Analog Volt 7","Analog Volt 8","Analog Volt 9","Analog Volt 10","Analog Volt 11","Battery Sense","Analog Temp 3","Analog Temp 4","Analog Volt 1","Analog Volt 2","Analog Volt 3","Analog Volt 4","Analog Temp 1","Analog Temp 2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:59:28 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:30:29 UTC 2023 pageSize = 27468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 27458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_proteus_h7.ini b/firmware/tunerstudio/generated/rusefi_proteus_h7.ini index e6b78101b0..71669d55eb 100644 --- a/firmware/tunerstudio/generated/rusefi_proteus_h7.ini +++ b/firmware/tunerstudio/generated/rusefi_proteus_h7.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.proteus_h7.3097098038" + signature = "rusEFI master.2023.07.19.proteus_h7.1627903692" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.proteus_h7.3097098038" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.proteus_h7.1627903692" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","Analog Volt 5","Analog Volt 6","Analog Volt 7","Analog Volt 8","Analog Volt 9","Analog Volt 10","Analog Volt 11","Battery Sense","Analog Temp 3","Analog Temp 4","Analog Volt 1","Analog Volt 2","Analog Volt 3","Analog Volt 4","Analog Temp 1","Analog Temp 2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:59:34 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:30:34 UTC 2023 pageSize = 27468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 27458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_s105.ini b/firmware/tunerstudio/generated/rusefi_s105.ini index a1bf05d27a..6cee4e6b3b 100644 --- a/firmware/tunerstudio/generated/rusefi_s105.ini +++ b/firmware/tunerstudio/generated/rusefi_s105.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.s105.2743374543" + signature = "rusEFI master.2023.07.19.s105.2048570165" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.s105.2743374543" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.s105.2048570165" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","56 - MAP","16 - TPS","19 - Knock","39 - CLT","INVALID","opt 55 - AFR 2","opt 21 - AC Press","18 - AFR 1","13 - Ignition switch in (15)","44 - +12 sense (MR)","INVALID","na 37 - MAF","INVALID","INVALID","40 - IAT" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:59:14 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:30:18 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_small-can.ini b/firmware/tunerstudio/generated/rusefi_small-can.ini index f5bc9090a6..9bcfefeb6b 100644 --- a/firmware/tunerstudio/generated/rusefi_small-can.ini +++ b/firmware/tunerstudio/generated/rusefi_small-can.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.small-can.760093623" + signature = "rusEFI master.2023.07.19.small-can.4107287117" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.small-can.760093623" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.small-can.4107287117" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","B4 - Analog input","INVALID","INVALID","INVALID","A2 Battery Sense","INVALID","INVALID","INVALID","INVALID","INVALID","B2 - Analog input" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:58:56 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:30:04 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini b/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini index 0f0b39349d..2cf805fc04 100644 --- a/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.subaru_eg33_f7.3226644612" + signature = "rusEFI master.2023.07.19.subaru_eg33_f7.432836990" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.subaru_eg33_f7.3226644612" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.subaru_eg33_f7.432836990" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","AUX0_18 - MAP Ain","INVALID","INVALID","B05 - MAF Ain","INVALID","AUX0_19 - IAT Ain","A02 - VBat","INVALID","A06 - Oxyg 2 Ain","A04 - EGR t Ain","INVALID","A18 - AUX0 Ain","B02 - TPS Ain","INVALID","A03 - Coolant t Ain","A06 - Oxyg 1 Ain" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:57:59 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:29:18 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_t-b-g.ini b/firmware/tunerstudio/generated/rusefi_t-b-g.ini index 2656909b01..1719d65dd9 100644 --- a/firmware/tunerstudio/generated/rusefi_t-b-g.ini +++ b/firmware/tunerstudio/generated/rusefi_t-b-g.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.t-b-g.3353311123" + signature = "rusEFI master.2023.07.19.t-b-g.507598441" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.t-b-g.3353311123" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.t-b-g.507598441" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:59:17 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:30:20 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini b/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini index 26ad7265e2..3a8daafe64 100644 --- a/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini +++ b/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini @@ -34,12 +34,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2023.07.19.tdg-pdm8.1299274673" + signature = "rusEFI master.2023.07.19.tdg-pdm8.2498722379" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2023.07.19.tdg-pdm8.1299274673" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2023.07.19.tdg-pdm8.2498722379" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -92,7 +92,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","INVALID","INVALID","INVALID","Battery Sense","INVALID","INVALID","INVALID","Sense 7","Sense 8","Sense 1","Sense 2","Sense 3","Sense 4","Sense 5","Sense 6" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 14:59:51 UTC 2023 +; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:30:48 UTC 2023 pageSize = 23468 page = 1 @@ -1553,7 +1553,7 @@ lambdaMaxDeviationRpmBins = array, U16, 23458, [4], "RPM", 1, 0, 0, 18000, 0 cylinderBore = "Cylinder diameter in mm." fuelAlgorithm = "This setting controls which fuel quantity control algorithm is used.\nAlpha-N means drive by TPS commonly only used for NA engines\nSpeed Density requires MAP sensor and is the default choice for may installs\nMAF air charge is a cylinder filling based method that uses a mass air flow sensor." crankingInjectionMode = "This is the injection strategy during engine start. See Fuel/Injection settings for more detail. It is suggested to use "Simultaneous"." - injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups. If your injectors are individually wired you will also need to enable "Two wire batch emulation". \nset injection_mode X\nSee also twoWireBatchInjection" + injectionMode = "This is where the fuel injection type is defined: "Simultaneous" means all injectors will fire together at once. "Sequential" fires the injectors on a per cylinder basis, which requires individually wired injectors. "Batched" will fire the injectors in groups." boostControlMinRpm = "Minimum RPM to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinTps = "Minimum TPS to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." boostControlMinMap = "Minimum MAP to enable boost control. Use this to avoid solenoid noise at idle, and help spool in some cases." diff --git a/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java b/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java index 7b25f9c949..03904d0314 100644 --- a/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java +++ b/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java @@ -1,6 +1,6 @@ package com.rusefi.config.generated; -// this file was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 15:00:00 UTC 2023 +// this file was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Wed Jul 19 16:30:54 UTC 2023 // by class com.rusefi.output.FileJavaFieldsConsumer import com.rusefi.config.*; @@ -1023,7 +1023,6 @@ public class Fields { public static final int SentEtbType_FORD_TYPE_1 = 2; public static final int SentEtbType_GM_TYPE_1 = 1; public static final int SentEtbType_NONE = 0; - public static final int SIGNATURE_HASH = 1690822056; public static final String SIMULATOR_TUNE_BIN_FILE_NAME = "generated/simulator_tune_image.bin"; public static final int spi_device_e_SPI_DEVICE_1 = 1; public static final int spi_device_e_SPI_DEVICE_2 = 2; @@ -1247,7 +1246,7 @@ public class Fields { public static final int TS_RESPONSE_UNDERRUN = 0x80; public static final int TS_RESPONSE_UNRECOGNIZED_COMMAND = 0x83; public static final char TS_SET_LOGGER_SWITCH = 'l'; - public static final String TS_SIGNATURE = "rusEFI master.2023.07.19.f407-discovery.1690822056"; + public static final String TS_SIGNATURE = "rusEFI master.2023.07.19.f407-discovery.3176776786"; public static final char TS_SINGLE_WRITE_COMMAND = 'W'; public static final char TS_TEST_COMMAND = 't'; public static final int TS_TOTAL_OUTPUT_SIZE = 1392;