Auto-generated configs and docs

2023-12-10 16:38:35 +00:00 · 2023-12-10 16:38:35 +00:00 · 30fa44ddd4
parent 699ccb1262
commit 30fa44ddd4
96 changed files with 532 additions and 347 deletions
--- a/firmware/config/boards/cypress/config/controllers/algo/engine_configuration_generated_structures.h
+++ b/firmware/config/boards/cypress/config/controllers/algo/engine_configuration_generated_structures.h
@ -1,4 +1,4 @@
-// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Thu Nov 30 23:22:28 UTC 2023
+// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:36:49 UTC 2023
 // by class com.rusefi.output.CHeaderConsumer
 // begin
 #pragma once
@ -2141,11 +2141,13 @@ struct engine_configuration_s {
 	 */
 	boostType_e boostType;
 	/**
-	 * need 4 byte alignment
-	units
 	 * offset 965
 	 */
-	uint8_t alignmentFill_at_965[3];
+	pin_input_mode_e ignitionKeyDigitalPinMode;
+	/**
+	 * offset 966
+	 */
+	Gpio ignitionKeyDigitalPin;
 	/**
 	Hz
 	 * offset 968
@ -2999,76 +3001,76 @@ struct engine_configuration_s {
 	bool can2ListenMode : 1 {};
 	/**
 	offset 1572 bit 8 */
-	bool unusedBit_527_8 : 1 {};
+	bool unusedBit_528_8 : 1 {};
 	/**
 	offset 1572 bit 9 */
-	bool unusedBit_527_9 : 1 {};
+	bool unusedBit_528_9 : 1 {};
 	/**
 	offset 1572 bit 10 */
-	bool unusedBit_527_10 : 1 {};
+	bool unusedBit_528_10 : 1 {};
 	/**
 	offset 1572 bit 11 */
-	bool unusedBit_527_11 : 1 {};
+	bool unusedBit_528_11 : 1 {};
 	/**
 	offset 1572 bit 12 */
-	bool unusedBit_527_12 : 1 {};
+	bool unusedBit_528_12 : 1 {};
 	/**
 	offset 1572 bit 13 */
-	bool unusedBit_527_13 : 1 {};
+	bool unusedBit_528_13 : 1 {};
 	/**
 	offset 1572 bit 14 */
-	bool unusedBit_527_14 : 1 {};
+	bool unusedBit_528_14 : 1 {};
 	/**
 	offset 1572 bit 15 */
-	bool unusedBit_527_15 : 1 {};
+	bool unusedBit_528_15 : 1 {};
 	/**
 	offset 1572 bit 16 */
-	bool unusedBit_527_16 : 1 {};
+	bool unusedBit_528_16 : 1 {};
 	/**
 	offset 1572 bit 17 */
-	bool unusedBit_527_17 : 1 {};
+	bool unusedBit_528_17 : 1 {};
 	/**
 	offset 1572 bit 18 */
-	bool unusedBit_527_18 : 1 {};
+	bool unusedBit_528_18 : 1 {};
 	/**
 	offset 1572 bit 19 */
-	bool unusedBit_527_19 : 1 {};
+	bool unusedBit_528_19 : 1 {};
 	/**
 	offset 1572 bit 20 */
-	bool unusedBit_527_20 : 1 {};
+	bool unusedBit_528_20 : 1 {};
 	/**
 	offset 1572 bit 21 */
-	bool unusedBit_527_21 : 1 {};
+	bool unusedBit_528_21 : 1 {};
 	/**
 	offset 1572 bit 22 */
-	bool unusedBit_527_22 : 1 {};
+	bool unusedBit_528_22 : 1 {};
 	/**
 	offset 1572 bit 23 */
-	bool unusedBit_527_23 : 1 {};
+	bool unusedBit_528_23 : 1 {};
 	/**
 	offset 1572 bit 24 */
-	bool unusedBit_527_24 : 1 {};
+	bool unusedBit_528_24 : 1 {};
 	/**
 	offset 1572 bit 25 */
-	bool unusedBit_527_25 : 1 {};
+	bool unusedBit_528_25 : 1 {};
 	/**
 	offset 1572 bit 26 */
-	bool unusedBit_527_26 : 1 {};
+	bool unusedBit_528_26 : 1 {};
 	/**
 	offset 1572 bit 27 */
-	bool unusedBit_527_27 : 1 {};
+	bool unusedBit_528_27 : 1 {};
 	/**
 	offset 1572 bit 28 */
-	bool unusedBit_527_28 : 1 {};
+	bool unusedBit_528_28 : 1 {};
 	/**
 	offset 1572 bit 29 */
-	bool unusedBit_527_29 : 1 {};
+	bool unusedBit_528_29 : 1 {};
 	/**
 	offset 1572 bit 30 */
-	bool unusedBit_527_30 : 1 {};
+	bool unusedBit_528_30 : 1 {};
 	/**
 	offset 1572 bit 31 */
-	bool unusedBit_527_31 : 1 {};
+	bool unusedBit_528_31 : 1 {};
 	/**
 	 * offset 1576
 	 */
@ -5379,4 +5381,4 @@ struct persistent_config_s {
 static_assert(sizeof(persistent_config_s) == 23880);

 // end
-// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Thu Nov 30 23:22:28 UTC 2023
+// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:36:49 UTC 2023
--- a/firmware/config/boards/cypress/config/controllers/algo/rusefi_generated.h
+++ b/firmware/config/boards/cypress/config/controllers/algo/rusefi_generated.h
@ -818,7 +818,7 @@
 #define SentEtbType_NONE 0
 #define show_Frankenso_presets true
 #define show_test_presets true
-#define SIGNATURE_HASH 2799713815
+#define SIGNATURE_HASH 673865202
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@ -1115,7 +1115,7 @@
 #define ts_show_vr_threshold_2 true
 #define ts_show_vr_threshold_all true
 #define ts_show_vr_threshold_pins true
-#define TS_SIGNATURE "rusEFI master.2023.12.10.cypress.2799713815"
+#define TS_SIGNATURE "rusEFI master.2023.12.10.cypress.673865202"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'
--- a/firmware/config/boards/kinetis/config/controllers/algo/engine_configuration_generated_structures.h
+++ b/firmware/config/boards/kinetis/config/controllers/algo/engine_configuration_generated_structures.h
@ -1,4 +1,4 @@
-// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Thu Nov 30 23:22:27 UTC 2023
+// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:36:48 UTC 2023
 // by class com.rusefi.output.CHeaderConsumer
 // begin
 #pragma once
@ -2141,11 +2141,13 @@ struct engine_configuration_s {
 	 */
 	boostType_e boostType;
 	/**
-	 * need 4 byte alignment
-	units
 	 * offset 965
 	 */
-	uint8_t alignmentFill_at_965[3];
+	pin_input_mode_e ignitionKeyDigitalPinMode;
+	/**
+	 * offset 966
+	 */
+	Gpio ignitionKeyDigitalPin;
 	/**
 	Hz
 	 * offset 968
@ -2999,76 +3001,76 @@ struct engine_configuration_s {
 	bool can2ListenMode : 1 {};
 	/**
 	offset 1572 bit 8 */
-	bool unusedBit_527_8 : 1 {};
+	bool unusedBit_528_8 : 1 {};
 	/**
 	offset 1572 bit 9 */
-	bool unusedBit_527_9 : 1 {};
+	bool unusedBit_528_9 : 1 {};
 	/**
 	offset 1572 bit 10 */
-	bool unusedBit_527_10 : 1 {};
+	bool unusedBit_528_10 : 1 {};
 	/**
 	offset 1572 bit 11 */
-	bool unusedBit_527_11 : 1 {};
+	bool unusedBit_528_11 : 1 {};
 	/**
 	offset 1572 bit 12 */
-	bool unusedBit_527_12 : 1 {};
+	bool unusedBit_528_12 : 1 {};
 	/**
 	offset 1572 bit 13 */
-	bool unusedBit_527_13 : 1 {};
+	bool unusedBit_528_13 : 1 {};
 	/**
 	offset 1572 bit 14 */
-	bool unusedBit_527_14 : 1 {};
+	bool unusedBit_528_14 : 1 {};
 	/**
 	offset 1572 bit 15 */
-	bool unusedBit_527_15 : 1 {};
+	bool unusedBit_528_15 : 1 {};
 	/**
 	offset 1572 bit 16 */
-	bool unusedBit_527_16 : 1 {};
+	bool unusedBit_528_16 : 1 {};
 	/**
 	offset 1572 bit 17 */
-	bool unusedBit_527_17 : 1 {};
+	bool unusedBit_528_17 : 1 {};
 	/**
 	offset 1572 bit 18 */
-	bool unusedBit_527_18 : 1 {};
+	bool unusedBit_528_18 : 1 {};
 	/**
 	offset 1572 bit 19 */
-	bool unusedBit_527_19 : 1 {};
+	bool unusedBit_528_19 : 1 {};
 	/**
 	offset 1572 bit 20 */
-	bool unusedBit_527_20 : 1 {};
+	bool unusedBit_528_20 : 1 {};
 	/**
 	offset 1572 bit 21 */
-	bool unusedBit_527_21 : 1 {};
+	bool unusedBit_528_21 : 1 {};
 	/**
 	offset 1572 bit 22 */
-	bool unusedBit_527_22 : 1 {};
+	bool unusedBit_528_22 : 1 {};
 	/**
 	offset 1572 bit 23 */
-	bool unusedBit_527_23 : 1 {};
+	bool unusedBit_528_23 : 1 {};
 	/**
 	offset 1572 bit 24 */
-	bool unusedBit_527_24 : 1 {};
+	bool unusedBit_528_24 : 1 {};
 	/**
 	offset 1572 bit 25 */
-	bool unusedBit_527_25 : 1 {};
+	bool unusedBit_528_25 : 1 {};
 	/**
 	offset 1572 bit 26 */
-	bool unusedBit_527_26 : 1 {};
+	bool unusedBit_528_26 : 1 {};
 	/**
 	offset 1572 bit 27 */
-	bool unusedBit_527_27 : 1 {};
+	bool unusedBit_528_27 : 1 {};
 	/**
 	offset 1572 bit 28 */
-	bool unusedBit_527_28 : 1 {};
+	bool unusedBit_528_28 : 1 {};
 	/**
 	offset 1572 bit 29 */
-	bool unusedBit_527_29 : 1 {};
+	bool unusedBit_528_29 : 1 {};
 	/**
 	offset 1572 bit 30 */
-	bool unusedBit_527_30 : 1 {};
+	bool unusedBit_528_30 : 1 {};
 	/**
 	offset 1572 bit 31 */
-	bool unusedBit_527_31 : 1 {};
+	bool unusedBit_528_31 : 1 {};
 	/**
 	 * offset 1576
 	 */
@ -5379,4 +5381,4 @@ struct persistent_config_s {
 static_assert(sizeof(persistent_config_s) == 22504);

 // end
-// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Thu Nov 30 23:22:27 UTC 2023
+// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:36:48 UTC 2023
--- a/firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h
+++ b/firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h
@ -818,7 +818,7 @@
 #define SentEtbType_NONE 0
 #define show_Frankenso_presets true
 #define show_test_presets true
-#define SIGNATURE_HASH 3828480441
+#define SIGNATURE_HASH 1794873948
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@ -1115,7 +1115,7 @@
 #define ts_show_vr_threshold_2 true
 #define ts_show_vr_threshold_all true
 #define ts_show_vr_threshold_pins true
-#define TS_SIGNATURE "rusEFI master.2023.12.10.kin.3828480441"
+#define TS_SIGNATURE "rusEFI master.2023.12.10.kin.1794873948"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'
--- a/firmware/config/boards/subaru_eg33/config/controllers/algo/engine_configuration_generated_structures.h
+++ b/firmware/config/boards/subaru_eg33/config/controllers/algo/engine_configuration_generated_structures.h
@ -1,4 +1,4 @@
-// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Thu Nov 30 23:22:29 UTC 2023
+// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:36:50 UTC 2023
 // by class com.rusefi.output.CHeaderConsumer
 // begin
 #pragma once
@ -2141,11 +2141,13 @@ struct engine_configuration_s {
 	 */
 	boostType_e boostType;
 	/**
-	 * need 4 byte alignment
-	units
 	 * offset 965
 	 */
-	uint8_t alignmentFill_at_965[3];
+	pin_input_mode_e ignitionKeyDigitalPinMode;
+	/**
+	 * offset 966
+	 */
+	Gpio ignitionKeyDigitalPin;
 	/**
 	Hz
 	 * offset 968
@ -2999,76 +3001,76 @@ struct engine_configuration_s {
 	bool can2ListenMode : 1 {};
 	/**
 	offset 1572 bit 8 */
-	bool unusedBit_527_8 : 1 {};
+	bool unusedBit_528_8 : 1 {};
 	/**
 	offset 1572 bit 9 */
-	bool unusedBit_527_9 : 1 {};
+	bool unusedBit_528_9 : 1 {};
 	/**
 	offset 1572 bit 10 */
-	bool unusedBit_527_10 : 1 {};
+	bool unusedBit_528_10 : 1 {};
 	/**
 	offset 1572 bit 11 */
-	bool unusedBit_527_11 : 1 {};
+	bool unusedBit_528_11 : 1 {};
 	/**
 	offset 1572 bit 12 */
-	bool unusedBit_527_12 : 1 {};
+	bool unusedBit_528_12 : 1 {};
 	/**
 	offset 1572 bit 13 */
-	bool unusedBit_527_13 : 1 {};
+	bool unusedBit_528_13 : 1 {};
 	/**
 	offset 1572 bit 14 */
-	bool unusedBit_527_14 : 1 {};
+	bool unusedBit_528_14 : 1 {};
 	/**
 	offset 1572 bit 15 */
-	bool unusedBit_527_15 : 1 {};
+	bool unusedBit_528_15 : 1 {};
 	/**
 	offset 1572 bit 16 */
-	bool unusedBit_527_16 : 1 {};
+	bool unusedBit_528_16 : 1 {};
 	/**
 	offset 1572 bit 17 */
-	bool unusedBit_527_17 : 1 {};
+	bool unusedBit_528_17 : 1 {};
 	/**
 	offset 1572 bit 18 */
-	bool unusedBit_527_18 : 1 {};
+	bool unusedBit_528_18 : 1 {};
 	/**
 	offset 1572 bit 19 */
-	bool unusedBit_527_19 : 1 {};
+	bool unusedBit_528_19 : 1 {};
 	/**
 	offset 1572 bit 20 */
-	bool unusedBit_527_20 : 1 {};
+	bool unusedBit_528_20 : 1 {};
 	/**
 	offset 1572 bit 21 */
-	bool unusedBit_527_21 : 1 {};
+	bool unusedBit_528_21 : 1 {};
 	/**
 	offset 1572 bit 22 */
-	bool unusedBit_527_22 : 1 {};
+	bool unusedBit_528_22 : 1 {};
 	/**
 	offset 1572 bit 23 */
-	bool unusedBit_527_23 : 1 {};
+	bool unusedBit_528_23 : 1 {};
 	/**
 	offset 1572 bit 24 */
-	bool unusedBit_527_24 : 1 {};
+	bool unusedBit_528_24 : 1 {};
 	/**
 	offset 1572 bit 25 */
-	bool unusedBit_527_25 : 1 {};
+	bool unusedBit_528_25 : 1 {};
 	/**
 	offset 1572 bit 26 */
-	bool unusedBit_527_26 : 1 {};
+	bool unusedBit_528_26 : 1 {};
 	/**
 	offset 1572 bit 27 */
-	bool unusedBit_527_27 : 1 {};
+	bool unusedBit_528_27 : 1 {};
 	/**
 	offset 1572 bit 28 */
-	bool unusedBit_527_28 : 1 {};
+	bool unusedBit_528_28 : 1 {};
 	/**
 	offset 1572 bit 29 */
-	bool unusedBit_527_29 : 1 {};
+	bool unusedBit_528_29 : 1 {};
 	/**
 	offset 1572 bit 30 */
-	bool unusedBit_527_30 : 1 {};
+	bool unusedBit_528_30 : 1 {};
 	/**
 	offset 1572 bit 31 */
-	bool unusedBit_527_31 : 1 {};
+	bool unusedBit_528_31 : 1 {};
 	/**
 	 * offset 1576
 	 */
@ -5379,4 +5381,4 @@ struct persistent_config_s {
 static_assert(sizeof(persistent_config_s) == 23880);

 // end
-// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Thu Nov 30 23:22:29 UTC 2023
+// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:36:50 UTC 2023
--- a/firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h
+++ b/firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h
@ -1056,7 +1056,7 @@
 #define show_Frankenso_presets false
 #define show_Proteus_presets false
 #define show_test_presets false
-#define SIGNATURE_HASH 2708338944
+#define SIGNATURE_HASH 799513317
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@ -1353,7 +1353,7 @@
 #define ts_show_vr_threshold_2 true
 #define ts_show_vr_threshold_all true
 #define ts_show_vr_threshold_pins true
-#define TS_SIGNATURE "rusEFI master.2023.12.10.subaru_eg33_f7.2708338944"
+#define TS_SIGNATURE "rusEFI master.2023.12.10.subaru_eg33_f7.799513317"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'
--- a/firmware/controllers/generated/engine_configuration_generated_structures.h
+++ b/firmware/controllers/generated/engine_configuration_generated_structures.h
@ -1,4 +1,4 @@
-// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Thu Nov 30 23:24:13 UTC 2023
+// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:38:34 UTC 2023
 // by class com.rusefi.output.CHeaderConsumer
 // begin
 #pragma once
@ -2141,11 +2141,13 @@ struct engine_configuration_s {
 	 */
 	boostType_e boostType;
 	/**
-	 * need 4 byte alignment
-	units
 	 * offset 965
 	 */
-	uint8_t alignmentFill_at_965[3];
+	pin_input_mode_e ignitionKeyDigitalPinMode;
+	/**
+	 * offset 966
+	 */
+	Gpio ignitionKeyDigitalPin;
 	/**
 	Hz
 	 * offset 968
@ -2999,76 +3001,76 @@ struct engine_configuration_s {
 	bool can2ListenMode : 1 {};
 	/**
 	offset 1572 bit 8 */
-	bool unusedBit_527_8 : 1 {};
+	bool unusedBit_528_8 : 1 {};
 	/**
 	offset 1572 bit 9 */
-	bool unusedBit_527_9 : 1 {};
+	bool unusedBit_528_9 : 1 {};
 	/**
 	offset 1572 bit 10 */
-	bool unusedBit_527_10 : 1 {};
+	bool unusedBit_528_10 : 1 {};
 	/**
 	offset 1572 bit 11 */
-	bool unusedBit_527_11 : 1 {};
+	bool unusedBit_528_11 : 1 {};
 	/**
 	offset 1572 bit 12 */
-	bool unusedBit_527_12 : 1 {};
+	bool unusedBit_528_12 : 1 {};
 	/**
 	offset 1572 bit 13 */
-	bool unusedBit_527_13 : 1 {};
+	bool unusedBit_528_13 : 1 {};
 	/**
 	offset 1572 bit 14 */
-	bool unusedBit_527_14 : 1 {};
+	bool unusedBit_528_14 : 1 {};
 	/**
 	offset 1572 bit 15 */
-	bool unusedBit_527_15 : 1 {};
+	bool unusedBit_528_15 : 1 {};
 	/**
 	offset 1572 bit 16 */
-	bool unusedBit_527_16 : 1 {};
+	bool unusedBit_528_16 : 1 {};
 	/**
 	offset 1572 bit 17 */
-	bool unusedBit_527_17 : 1 {};
+	bool unusedBit_528_17 : 1 {};
 	/**
 	offset 1572 bit 18 */
-	bool unusedBit_527_18 : 1 {};
+	bool unusedBit_528_18 : 1 {};
 	/**
 	offset 1572 bit 19 */
-	bool unusedBit_527_19 : 1 {};
+	bool unusedBit_528_19 : 1 {};
 	/**
 	offset 1572 bit 20 */
-	bool unusedBit_527_20 : 1 {};
+	bool unusedBit_528_20 : 1 {};
 	/**
 	offset 1572 bit 21 */
-	bool unusedBit_527_21 : 1 {};
+	bool unusedBit_528_21 : 1 {};
 	/**
 	offset 1572 bit 22 */
-	bool unusedBit_527_22 : 1 {};
+	bool unusedBit_528_22 : 1 {};
 	/**
 	offset 1572 bit 23 */
-	bool unusedBit_527_23 : 1 {};
+	bool unusedBit_528_23 : 1 {};
 	/**
 	offset 1572 bit 24 */
-	bool unusedBit_527_24 : 1 {};
+	bool unusedBit_528_24 : 1 {};
 	/**
 	offset 1572 bit 25 */
-	bool unusedBit_527_25 : 1 {};
+	bool unusedBit_528_25 : 1 {};
 	/**
 	offset 1572 bit 26 */
-	bool unusedBit_527_26 : 1 {};
+	bool unusedBit_528_26 : 1 {};
 	/**
 	offset 1572 bit 27 */
-	bool unusedBit_527_27 : 1 {};
+	bool unusedBit_528_27 : 1 {};
 	/**
 	offset 1572 bit 28 */
-	bool unusedBit_527_28 : 1 {};
+	bool unusedBit_528_28 : 1 {};
 	/**
 	offset 1572 bit 29 */
-	bool unusedBit_527_29 : 1 {};
+	bool unusedBit_528_29 : 1 {};
 	/**
 	offset 1572 bit 30 */
-	bool unusedBit_527_30 : 1 {};
+	bool unusedBit_528_30 : 1 {};
 	/**
 	offset 1572 bit 31 */
-	bool unusedBit_527_31 : 1 {};
+	bool unusedBit_528_31 : 1 {};
 	/**
 	 * offset 1576
 	 */
@ -5379,4 +5381,4 @@ struct persistent_config_s {
 static_assert(sizeof(persistent_config_s) == 23880);

 // end
-// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Thu Nov 30 23:24:13 UTC 2023
+// this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:38:34 UTC 2023
--- a/firmware/controllers/generated/rusefi_generated.h
+++ b/firmware/controllers/generated/rusefi_generated.h
@ -1144,7 +1144,7 @@
 #define SentEtbType_NONE 0
 #define show_Frankenso_presets true
 #define show_test_presets true
-#define SIGNATURE_HASH 543073412
+#define SIGNATURE_HASH 2928985953
 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image"
 #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin"
@ -1441,7 +1441,7 @@
 #define ts_show_vr_threshold_2 true
 #define ts_show_vr_threshold_all true
 #define ts_show_vr_threshold_pins true
-#define TS_SIGNATURE "rusEFI master.2023.12.10.f407-discovery.543073412"
+#define TS_SIGNATURE "rusEFI master.2023.12.10.f407-discovery.2928985953"
 #define TS_SIMULATE_CAN '>'
 #define TS_SIMULATE_CAN_char >
 #define TS_SINGLE_WRITE_COMMAND 'W'
--- a/firmware/controllers/generated/signature_alphax-2chan.h
+++ b/firmware/controllers/generated/signature_alphax-2chan.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 3600124432
-#define TS_SIGNATURE "rusEFI master.2023.12.10.alphax-2chan.3600124432"
+#define SIGNATURE_HASH 1482680821
+#define TS_SIGNATURE "rusEFI master.2023.12.10.alphax-2chan.1482680821"
--- a/firmware/controllers/generated/signature_alphax-4chan.h
+++ b/firmware/controllers/generated/signature_alphax-4chan.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 2130227398
-#define TS_SIGNATURE "rusEFI master.2023.12.10.alphax-4chan.2130227398"
+#define SIGNATURE_HASH 4029862691
+#define TS_SIGNATURE "rusEFI master.2023.12.10.alphax-4chan.4029862691"
--- a/firmware/controllers/generated/signature_alphax-4chan_f7.h
+++ b/firmware/controllers/generated/signature_alphax-4chan_f7.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 2130227398
-#define TS_SIGNATURE "rusEFI master.2023.12.10.alphax-4chan_f7.2130227398"
+#define SIGNATURE_HASH 4029862691
+#define TS_SIGNATURE "rusEFI master.2023.12.10.alphax-4chan_f7.4029862691"
--- a/firmware/controllers/generated/signature_alphax-8chan-revA.h
+++ b/firmware/controllers/generated/signature_alphax-8chan-revA.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 2534662164
-#define TS_SIGNATURE "rusEFI master.2023.12.10.alphax-8chan-revA.2534662164"
+#define SIGNATURE_HASH 433685489
+#define TS_SIGNATURE "rusEFI master.2023.12.10.alphax-8chan-revA.433685489"
--- a/firmware/controllers/generated/signature_alphax-8chan.h
+++ b/firmware/controllers/generated/signature_alphax-8chan.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 1220007351
-#define TS_SIGNATURE "rusEFI master.2023.12.10.alphax-8chan.1220007351"
+#define SIGNATURE_HASH 3330127442
+#define TS_SIGNATURE "rusEFI master.2023.12.10.alphax-8chan.3330127442"
--- a/firmware/controllers/generated/signature_alphax-8chan_f7.h
+++ b/firmware/controllers/generated/signature_alphax-8chan_f7.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 1220007351
-#define TS_SIGNATURE "rusEFI master.2023.12.10.alphax-8chan_f7.1220007351"
+#define SIGNATURE_HASH 3330127442
+#define TS_SIGNATURE "rusEFI master.2023.12.10.alphax-8chan_f7.3330127442"
--- a/firmware/controllers/generated/signature_at_start_f435.h
+++ b/firmware/controllers/generated/signature_at_start_f435.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 2799713815
-#define TS_SIGNATURE "rusEFI master.2023.12.10.at_start_f435.2799713815"
+#define SIGNATURE_HASH 673865202
+#define TS_SIGNATURE "rusEFI master.2023.12.10.at_start_f435.673865202"
--- a/firmware/controllers/generated/signature_atlas.h
+++ b/firmware/controllers/generated/signature_atlas.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 3806849625
-#define TS_SIGNATURE "rusEFI master.2023.12.10.atlas.3806849625"
+#define SIGNATURE_HASH 1814923708
+#define TS_SIGNATURE "rusEFI master.2023.12.10.atlas.1814923708"
--- a/firmware/controllers/generated/signature_cypress.h
+++ b/firmware/controllers/generated/signature_cypress.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on hellen_cypress_gen_config.bat by SignatureConsumer
 //

-#define SIGNATURE_HASH 2799713815
-#define TS_SIGNATURE "rusEFI master.2023.12.10.cypress.2799713815"
+#define SIGNATURE_HASH 673865202
+#define TS_SIGNATURE "rusEFI master.2023.12.10.cypress.673865202"
--- a/firmware/controllers/generated/signature_f407-discovery.h
+++ b/firmware/controllers/generated/signature_f407-discovery.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 543073412
-#define TS_SIGNATURE "rusEFI master.2023.12.10.f407-discovery.543073412"
+#define SIGNATURE_HASH 2928985953
+#define TS_SIGNATURE "rusEFI master.2023.12.10.f407-discovery.2928985953"
--- a/firmware/controllers/generated/signature_f429-discovery.h
+++ b/firmware/controllers/generated/signature_f429-discovery.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 2799713815
-#define TS_SIGNATURE "rusEFI master.2023.12.10.f429-discovery.2799713815"
+#define SIGNATURE_HASH 673865202
+#define TS_SIGNATURE "rusEFI master.2023.12.10.f429-discovery.673865202"
--- a/firmware/controllers/generated/signature_frankenso_na6.h
+++ b/firmware/controllers/generated/signature_frankenso_na6.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 2226314973
-#define TS_SIGNATURE "rusEFI master.2023.12.10.frankenso_na6.2226314973"
+#define SIGNATURE_HASH 175684920
+#define TS_SIGNATURE "rusEFI master.2023.12.10.frankenso_na6.175684920"
--- a/firmware/controllers/generated/signature_hellen-112-17.h
+++ b/firmware/controllers/generated/signature_hellen-112-17.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 3228789563
-#define TS_SIGNATURE "rusEFI master.2023.12.10.hellen-112-17.3228789563"
+#define SIGNATURE_HASH 1320749278
+#define TS_SIGNATURE "rusEFI master.2023.12.10.hellen-112-17.1320749278"
--- a/firmware/controllers/generated/signature_hellen-gm-e67.h
+++ b/firmware/controllers/generated/signature_hellen-gm-e67.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 370313447
-#define TS_SIGNATURE "rusEFI master.2023.12.10.hellen-gm-e67.370313447"
+#define SIGNATURE_HASH 2564352770
+#define TS_SIGNATURE "rusEFI master.2023.12.10.hellen-gm-e67.2564352770"
--- a/firmware/controllers/generated/signature_hellen-honda-k.h
+++ b/firmware/controllers/generated/signature_hellen-honda-k.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 2130706484
-#define TS_SIGNATURE "rusEFI master.2023.12.10.hellen-honda-k.2130706484"
+#define SIGNATURE_HASH 4056572881
+#define TS_SIGNATURE "rusEFI master.2023.12.10.hellen-honda-k.4056572881"
--- a/firmware/controllers/generated/signature_hellen-nb1.h
+++ b/firmware/controllers/generated/signature_hellen-nb1.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 3374461696
-#define TS_SIGNATURE "rusEFI master.2023.12.10.hellen-nb1.3374461696"
+#define SIGNATURE_HASH 1206407397
+#define TS_SIGNATURE "rusEFI master.2023.12.10.hellen-nb1.1206407397"
--- a/firmware/controllers/generated/signature_hellen121nissan.h
+++ b/firmware/controllers/generated/signature_hellen121nissan.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 1071044643
-#define TS_SIGNATURE "rusEFI master.2023.12.10.hellen121nissan.1071044643"
+#define SIGNATURE_HASH 2971450310
+#define TS_SIGNATURE "rusEFI master.2023.12.10.hellen121nissan.2971450310"
--- a/firmware/controllers/generated/signature_hellen121vag.h
+++ b/firmware/controllers/generated/signature_hellen121vag.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 849224148
-#define TS_SIGNATURE "rusEFI master.2023.12.10.hellen121vag.849224148"
+#define SIGNATURE_HASH 3159638577
+#define TS_SIGNATURE "rusEFI master.2023.12.10.hellen121vag.3159638577"
--- a/firmware/controllers/generated/signature_hellen128.h
+++ b/firmware/controllers/generated/signature_hellen128.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 1764931965
-#define TS_SIGNATURE "rusEFI master.2023.12.10.hellen128.1764931965"
+#define SIGNATURE_HASH 3891845784
+#define TS_SIGNATURE "rusEFI master.2023.12.10.hellen128.3891845784"
--- a/firmware/controllers/generated/signature_hellen154hyundai.h
+++ b/firmware/controllers/generated/signature_hellen154hyundai.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 2487429803
-#define TS_SIGNATURE "rusEFI master.2023.12.10.hellen154hyundai.2487429803"
+#define SIGNATURE_HASH 445204814
+#define TS_SIGNATURE "rusEFI master.2023.12.10.hellen154hyundai.445204814"
--- a/firmware/controllers/generated/signature_hellen72.h
+++ b/firmware/controllers/generated/signature_hellen72.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 3399759930
-#define TS_SIGNATURE "rusEFI master.2023.12.10.hellen72.3399759930"
+#define SIGNATURE_HASH 1148083167
+#define TS_SIGNATURE "rusEFI master.2023.12.10.hellen72.1148083167"
--- a/firmware/controllers/generated/signature_hellen81.h
+++ b/firmware/controllers/generated/signature_hellen81.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 2075380856
-#define TS_SIGNATURE "rusEFI master.2023.12.10.hellen81.2075380856"
+#define SIGNATURE_HASH 4118392733
+#define TS_SIGNATURE "rusEFI master.2023.12.10.hellen81.4118392733"
--- a/firmware/controllers/generated/signature_hellen88bmw.h
+++ b/firmware/controllers/generated/signature_hellen88bmw.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 1220916179
-#define TS_SIGNATURE "rusEFI master.2023.12.10.hellen88bmw.1220916179"
+#define SIGNATURE_HASH 3322925110
+#define TS_SIGNATURE "rusEFI master.2023.12.10.hellen88bmw.3322925110"
--- a/firmware/controllers/generated/signature_hellenNA6.h
+++ b/firmware/controllers/generated/signature_hellenNA6.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 1307419187
-#define TS_SIGNATURE "rusEFI master.2023.12.10.hellenNA6.1307419187"
+#define SIGNATURE_HASH 3274162646
+#define TS_SIGNATURE "rusEFI master.2023.12.10.hellenNA6.3274162646"
--- a/firmware/controllers/generated/signature_hellenNA8_96.h
+++ b/firmware/controllers/generated/signature_hellenNA8_96.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 726446844
-#define TS_SIGNATURE "rusEFI master.2023.12.10.hellenNA8_96.726446844"
+#define SIGNATURE_HASH 2777075993
+#define TS_SIGNATURE "rusEFI master.2023.12.10.hellenNA8_96.2777075993"
--- a/firmware/controllers/generated/signature_kin.h
+++ b/firmware/controllers/generated/signature_kin.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on kinetis_gen_config.bat by SignatureConsumer
 //

-#define SIGNATURE_HASH 3828480441
-#define TS_SIGNATURE "rusEFI master.2023.12.10.kin.3828480441"
+#define SIGNATURE_HASH 1794873948
+#define TS_SIGNATURE "rusEFI master.2023.12.10.kin.1794873948"
--- a/firmware/controllers/generated/signature_m74_9.h
+++ b/firmware/controllers/generated/signature_m74_9.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 787384381
-#define TS_SIGNATURE "rusEFI master.2023.12.10.m74_9.787384381"
+#define SIGNATURE_HASH 2686774232
+#define TS_SIGNATURE "rusEFI master.2023.12.10.m74_9.2686774232"
--- a/firmware/controllers/generated/signature_mre_f4.h
+++ b/firmware/controllers/generated/signature_mre_f4.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 2240665495
-#define TS_SIGNATURE "rusEFI master.2023.12.10.mre_f4.2240665495"
+#define SIGNATURE_HASH 189248626
+#define TS_SIGNATURE "rusEFI master.2023.12.10.mre_f4.189248626"
--- a/firmware/controllers/generated/signature_mre_f7.h
+++ b/firmware/controllers/generated/signature_mre_f7.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 2240665495
-#define TS_SIGNATURE "rusEFI master.2023.12.10.mre_f7.2240665495"
+#define SIGNATURE_HASH 189248626
+#define TS_SIGNATURE "rusEFI master.2023.12.10.mre_f7.189248626"
--- a/firmware/controllers/generated/signature_nucleo_f429.h
+++ b/firmware/controllers/generated/signature_nucleo_f429.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 2799713815
-#define TS_SIGNATURE "rusEFI master.2023.12.10.nucleo_f429.2799713815"
+#define SIGNATURE_HASH 673865202
+#define TS_SIGNATURE "rusEFI master.2023.12.10.nucleo_f429.673865202"
--- a/firmware/controllers/generated/signature_nucleo_f767.h
+++ b/firmware/controllers/generated/signature_nucleo_f767.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 2799713815
-#define TS_SIGNATURE "rusEFI master.2023.12.10.nucleo_f767.2799713815"
+#define SIGNATURE_HASH 673865202
+#define TS_SIGNATURE "rusEFI master.2023.12.10.nucleo_f767.673865202"
--- a/firmware/controllers/generated/signature_nucleo_h743.h
+++ b/firmware/controllers/generated/signature_nucleo_h743.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 2799713815
-#define TS_SIGNATURE "rusEFI master.2023.12.10.nucleo_h743.2799713815"
+#define SIGNATURE_HASH 673865202
+#define TS_SIGNATURE "rusEFI master.2023.12.10.nucleo_h743.673865202"
--- a/firmware/controllers/generated/signature_prometheus_405.h
+++ b/firmware/controllers/generated/signature_prometheus_405.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 2524246919
-#define TS_SIGNATURE "rusEFI master.2023.12.10.prometheus_405.2524246919"
+#define SIGNATURE_HASH 415141986
+#define TS_SIGNATURE "rusEFI master.2023.12.10.prometheus_405.415141986"
--- a/firmware/controllers/generated/signature_prometheus_469.h
+++ b/firmware/controllers/generated/signature_prometheus_469.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 2524246919
-#define TS_SIGNATURE "rusEFI master.2023.12.10.prometheus_469.2524246919"
+#define SIGNATURE_HASH 415141986
+#define TS_SIGNATURE "rusEFI master.2023.12.10.prometheus_469.415141986"
--- a/firmware/controllers/generated/signature_proteus_f4.h
+++ b/firmware/controllers/generated/signature_proteus_f4.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 2800992365
-#define TS_SIGNATURE "rusEFI master.2023.12.10.proteus_f4.2800992365"
+#define SIGNATURE_HASH 674866056
+#define TS_SIGNATURE "rusEFI master.2023.12.10.proteus_f4.674866056"
--- a/firmware/controllers/generated/signature_proteus_f7.h
+++ b/firmware/controllers/generated/signature_proteus_f7.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 2800992365
-#define TS_SIGNATURE "rusEFI master.2023.12.10.proteus_f7.2800992365"
+#define SIGNATURE_HASH 674866056
+#define TS_SIGNATURE "rusEFI master.2023.12.10.proteus_f7.674866056"
--- a/firmware/controllers/generated/signature_proteus_h7.h
+++ b/firmware/controllers/generated/signature_proteus_h7.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 2800992365
-#define TS_SIGNATURE "rusEFI master.2023.12.10.proteus_h7.2800992365"
+#define SIGNATURE_HASH 674866056
+#define TS_SIGNATURE "rusEFI master.2023.12.10.proteus_h7.674866056"
--- a/firmware/controllers/generated/signature_s105.h
+++ b/firmware/controllers/generated/signature_s105.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 3385581169
-#define TS_SIGNATURE "rusEFI master.2023.12.10.s105.3385581169"
+#define SIGNATURE_HASH 1191296404
+#define TS_SIGNATURE "rusEFI master.2023.12.10.s105.1191296404"
--- a/firmware/controllers/generated/signature_small-can-board.h
+++ b/firmware/controllers/generated/signature_small-can-board.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 2876244507
-#define TS_SIGNATURE "rusEFI master.2023.12.10.small-can-board.2876244507"
+#define SIGNATURE_HASH 632971774
+#define TS_SIGNATURE "rusEFI master.2023.12.10.small-can-board.632971774"
--- a/firmware/controllers/generated/signature_subaru_eg33_f7.h
+++ b/firmware/controllers/generated/signature_subaru_eg33_f7.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 2708338944
-#define TS_SIGNATURE "rusEFI master.2023.12.10.subaru_eg33_f7.2708338944"
+#define SIGNATURE_HASH 799513317
+#define TS_SIGNATURE "rusEFI master.2023.12.10.subaru_eg33_f7.799513317"
--- a/firmware/controllers/generated/signature_t-b-g.h
+++ b/firmware/controllers/generated/signature_t-b-g.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 2799713815
-#define TS_SIGNATURE "rusEFI master.2023.12.10.t-b-g.2799713815"
+#define SIGNATURE_HASH 673865202
+#define TS_SIGNATURE "rusEFI master.2023.12.10.t-b-g.673865202"
--- a/firmware/controllers/generated/signature_tdg-pdm8.h
+++ b/firmware/controllers/generated/signature_tdg-pdm8.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 743313973
-#define TS_SIGNATURE "rusEFI master.2023.12.10.tdg-pdm8.743313973"
+#define SIGNATURE_HASH 2726588880
+#define TS_SIGNATURE "rusEFI master.2023.12.10.tdg-pdm8.2726588880"
--- a/firmware/controllers/generated/signature_uaefi.h
+++ b/firmware/controllers/generated/signature_uaefi.h
@ -2,5 +2,5 @@
 // was generated automatically by rusEFI tool config_definition.jar based on gen_config.sh by SignatureConsumer
 //

-#define SIGNATURE_HASH 238822305
-#define TS_SIGNATURE "rusEFI master.2023.12.10.uaefi.238822305"
+#define SIGNATURE_HASH 2163621956
+#define TS_SIGNATURE "rusEFI master.2023.12.10.uaefi.2163621956"
--- a/firmware/tunerstudio/generated/rusefi.ini
+++ b/firmware/tunerstudio/generated/rusefi.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.f407-discovery.543073412"
+	signature	= "rusEFI master.2023.12.10.f407-discovery.2928985953"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.f407-discovery.543073412" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.f407-discovery.2928985953" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:52:12 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:38:34 UTC 2023

 pageSize            = 23880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7950,6 +7952,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini
+++ b/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.alphax-2chan.3600124432"
+	signature	= "rusEFI master.2023.12.10.alphax-2chan.1482680821"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.alphax-2chan.3600124432" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.alphax-2chan.1482680821" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="NONE","INVALID","B4 - O2","On-board MAP","INVALID","B5 - TPS","A2 Battery Sense","C7 - CAM Hall/Digital","X7 - AIN4","X1 - AIN1","INVALID","INVALID","B2 - MAP","B7 - CLT","B3 - IAT","X3 - AIN2"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:50:26 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:36:53 UTC 2023

 pageSize            = 23880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7920,6 +7922,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini
+++ b/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.alphax-4chan.2130227398"
+	signature	= "rusEFI master.2023.12.10.alphax-4chan.4029862691"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.alphax-4chan.2130227398" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.alphax-4chan.4029862691" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="NONE","INVALID","B4 - O2","On-board MAP","D5 - PPS","B5 - TPS","F7 - Ignition Key Voltage","C7 - CAM Hall/Digital","INVALID","D4 - TPS2","INVALID","X5 - AIN3","B2 - MAP","B7 - CLT","B3 - IAT","F6 - PPS2","X7 - AIN4","INVALID","INVALID","INVALID","X3 - AIN2","X1 - AIN1 and D5 on older boards"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:50:29 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:36:55 UTC 2023

 pageSize            = 23880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7923,6 +7925,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_alphax-4chan_f7.ini
+++ b/firmware/tunerstudio/generated/rusefi_alphax-4chan_f7.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.alphax-4chan_f7.2130227398"
+	signature	= "rusEFI master.2023.12.10.alphax-4chan_f7.4029862691"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.alphax-4chan_f7.2130227398" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.alphax-4chan_f7.4029862691" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="NONE","INVALID","B4 - O2","On-board MAP","D5 - PPS","B5 - TPS","F7 - Ignition Key Voltage","C7 - CAM Hall/Digital","INVALID","D4 - TPS2","INVALID","X5 - AIN3","B2 - MAP","B7 - CLT","B3 - IAT","F6 - PPS2","X7 - AIN4","INVALID","INVALID","INVALID","X3 - AIN2","X1 - AIN1 and D5 on older boards"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:50:32 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:36:58 UTC 2023

 pageSize            = 23880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7923,6 +7925,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_alphax-8chan-revA.ini
+++ b/firmware/tunerstudio/generated/rusefi_alphax-8chan-revA.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.alphax-8chan-revA.2534662164"
+	signature	= "rusEFI master.2023.12.10.alphax-8chan-revA.433685489"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.alphax-8chan-revA.2534662164" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.alphax-8chan-revA.433685489" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="NONE","INVALID","INVALID","INVALID","17A - PPS","23C - TPS","Battery Sense","INVALID","15D - AN5","24C - TPS2","14A - Analog 1","22A - Analog 22","On-board MAP","16A - CLT","15A - IAT","31C - PPS2","33A - AN3","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","16D - AN6","INVALID","INVALID","INVALID","INVALID","7C - AT4","INVALID","6C - AT3","14D - AN4"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:50:40 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:37:06 UTC 2023

 pageSize            = 23880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7924,6 +7926,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_alphax-8chan.ini
+++ b/firmware/tunerstudio/generated/rusefi_alphax-8chan.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.alphax-8chan.1220007351"
+	signature	= "rusEFI master.2023.12.10.alphax-8chan.3330127442"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.alphax-8chan.1220007351" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.alphax-8chan.3330127442" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="NONE","INVALID","3A - Aux Analog 2","On-board MAP","32A - PPS Sensor Input","31A - TPS Sensor Input","24 - Ignition Key Voltage","INVALID","INVALID","19A - Aux Analog 6","1A - Aux Analog 1","2A - Aux Analog 4","INVALID","29A - CLT Sensor Input","27A - IAT Sensor Input","INVALID","12A - Aux Analog 8","INVALID","11A - Aux Analog 3","INVALID","34A - PPS2 Sensor Input","33A - TPS2 Sensor Input","INVALID","INVALID","INVALID","4A - Aux Analog 7","INVALID","10A - Aux Analog 5","INVALID","28A - Aux Temp 2","28A - Aux Temp 1","INVALID","20A - Aux Analog 9"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:50:34 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:37:01 UTC 2023

 pageSize            = 23896
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7927,6 +7929,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_alphax-8chan_f7.ini
+++ b/firmware/tunerstudio/generated/rusefi_alphax-8chan_f7.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.alphax-8chan_f7.1220007351"
+	signature	= "rusEFI master.2023.12.10.alphax-8chan_f7.3330127442"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.alphax-8chan_f7.1220007351" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.alphax-8chan_f7.3330127442" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="NONE","INVALID","3A - Aux Analog 2","On-board MAP","32A - PPS Sensor Input","31A - TPS Sensor Input","24 - Ignition Key Voltage","INVALID","INVALID","19A - Aux Analog 6","1A - Aux Analog 1","2A - Aux Analog 4","INVALID","29A - CLT Sensor Input","27A - IAT Sensor Input","INVALID","12A - Aux Analog 8","INVALID","11A - Aux Analog 3","INVALID","34A - PPS2 Sensor Input","33A - TPS2 Sensor Input","INVALID","INVALID","INVALID","4A - Aux Analog 7","INVALID","10A - Aux Analog 5","INVALID","28A - Aux Temp 2","28A - Aux Temp 1","INVALID","20A - Aux Analog 9"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:50:37 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:37:03 UTC 2023

 pageSize            = 23896
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7927,6 +7929,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_at_start_f435.ini
+++ b/firmware/tunerstudio/generated/rusefi_at_start_f435.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.at_start_f435.2799713815"
+	signature	= "rusEFI master.2023.12.10.at_start_f435.673865202"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.at_start_f435.2799713815" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.at_start_f435.673865202" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:52:07 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:38:29 UTC 2023

 pageSize            = 23880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7946,6 +7948,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_atlas.ini
+++ b/firmware/tunerstudio/generated/rusefi_atlas.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.atlas.3806849625"
+	signature	= "rusEFI master.2023.12.10.atlas.1814923708"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.atlas.3806849625" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.atlas.1814923708" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:52:00 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:38:22 UTC 2023

 pageSize            = 23380
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7938,6 +7940,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_cypress.ini
+++ b/firmware/tunerstudio/generated/rusefi_cypress.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.cypress.2799713815"
+	signature	= "rusEFI master.2023.12.10.cypress.673865202"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.cypress.2799713815" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.cypress.673865202" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:50:23 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:36:49 UTC 2023

 pageSize            = 23880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7946,6 +7948,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_f407-discovery.ini
+++ b/firmware/tunerstudio/generated/rusefi_f407-discovery.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.f407-discovery.543073412"
+	signature	= "rusEFI master.2023.12.10.f407-discovery.2928985953"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.f407-discovery.543073412" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.f407-discovery.2928985953" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:52:05 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:38:27 UTC 2023

 pageSize            = 23880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7950,6 +7952,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_f429-discovery.ini
+++ b/firmware/tunerstudio/generated/rusefi_f429-discovery.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.f429-discovery.2799713815"
+	signature	= "rusEFI master.2023.12.10.f429-discovery.673865202"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.f429-discovery.2799713815" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.f429-discovery.673865202" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:51:50 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:38:13 UTC 2023

 pageSize            = 23880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7946,6 +7948,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini
+++ b/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.frankenso_na6.2226314973"
+	signature	= "rusEFI master.2023.12.10.frankenso_na6.175684920"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.frankenso_na6.2226314973" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.frankenso_na6.175684920" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="NONE","Analog 3O","Analog 3L","Analog 3M","Analog 3J","Analog 3I","INVALID","Analog 3H","Analog 3G","INVALID","INVALID","INVALID","Analog 3P","Analog 3Q","Analog 3N","Analog VBatt","Analog 3E"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:51:34 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:37:58 UTC 2023

 pageSize            = 23880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7946,6 +7948,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_hellen-112-17.ini
+++ b/firmware/tunerstudio/generated/rusefi_hellen-112-17.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.hellen-112-17.3228789563"
+	signature	= "rusEFI master.2023.12.10.hellen-112-17.1320749278"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.hellen-112-17.3228789563" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.hellen-112-17.1320749278" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="NONE","220 TPS Throttle Position 2","114 Analog Input","INVALID","121 PPS1","203 TPS Throttle Position 1","INVALID","107 TODO","119 Analog Input","110 Analog Input","INVALID","219 MAP","109 Analog Input","215 CLT","227 IAT","111 Analog Input","112 Analog Input"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:51:01 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:37:26 UTC 2023

 pageSize            = 23880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7921,6 +7923,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini
+++ b/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.hellen-gm-e67.370313447"
+	signature	= "rusEFI master.2023.12.10.hellen-gm-e67.2564352770"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.hellen-gm-e67.370313447" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.hellen-gm-e67.2564352770" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="NONE","INVALID","C2-60 - Oil Pressure","C3-58 - Baro","C1-47 - PPS1","C2-64 - TPS1","C1-19 Battery Sense","C1-45 Secondary Fuel Level","C3-57 - A/C Pressure","C2-66 - TPS2","C1-44 Primary Fuel Level","C2-65 - Trans Fluids","C3-59 - MAP","C3-55 - CLT","C3-56 - IAT","C1-49 - PPS2","C1-46 Vac Sense"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:51:11 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:37:36 UTC 2023

 pageSize            = 23880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7937,6 +7939,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_hellen-honda-k.ini
+++ b/firmware/tunerstudio/generated/rusefi_hellen-honda-k.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.hellen-honda-k.2130706484"
+	signature	= "rusEFI master.2023.12.10.hellen-honda-k.4056572881"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.hellen-honda-k.2130706484" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.hellen-honda-k.4056572881" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="NONE","INVALID","INVALID","INVALID","INVALID","A15 TPS","E9 Ignition Key Voltage","INVALID","INVALID","Aux Analog 1","INVALID","A19 - MAP","INVALID","B8 - CLT","B17 IAT","Aux Analog 2","Aux Analog 3"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:50:50 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:37:16 UTC 2023

 pageSize            = 24552
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7920,6 +7922,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini
+++ b/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.hellen-nb1.3374461696"
+	signature	= "rusEFI master.2023.12.10.hellen-nb1.1206407397"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.hellen-nb1.3374461696" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.hellen-nb1.1206407397" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="NONE","2C - O2S","TPS1","intMAP","1G - Steering/RES2","3E - TPS","1B - Battery Sense","2H - CAM","3S - EGR BOOST IN","2A - Pressure Input","2J - CRANK","2L - MAF","3D - MAP","2E - Coolant","2B - IAT","4C - IN TEMP/PPS2","1P - AC Switch"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:51:08 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:37:33 UTC 2023

 pageSize            = 23880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7937,6 +7939,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini
+++ b/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.hellen121nissan.1071044643"
+	signature	= "rusEFI master.2023.12.10.hellen121nissan.2971450310"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.hellen121nissan.1071044643" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.hellen121nissan.2971450310" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="NONE","51 - MAF","INVALID","Aux P68","106 - PPS 1","50 - TPS 1","109 Ignition Key Voltage","INVALID","INVALID","69 - TPS 2","INVALID","Aux P66","Aux P67","73 - CLT","34 - IAT","98 - PPS 2"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:50:47 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:37:13 UTC 2023

 pageSize            = 23880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7920,6 +7922,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_hellen121vag.ini
+++ b/firmware/tunerstudio/generated/rusefi_hellen121vag.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.hellen121vag.849224148"
+	signature	= "rusEFI master.2023.12.10.hellen121vag.3159638577"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.hellen121vag.849224148" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.hellen121vag.3159638577" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="NONE","14 - O2","INVALID","INVALID","34 In PPS1","92 - TPS 1","106 - KNOCK","86 - CAM1","87 - CAM2","84 - TPS2","INVALID","29 In Maf","101 - MAP2","93 - CLT","85 - IAT","35 In PPS2"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:50:45 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:37:11 UTC 2023

 pageSize            = 23880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7937,6 +7939,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini
+++ b/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.hellen128.1764931965"
+	signature	= "rusEFI master.2023.12.10.hellen128.3891845784"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.hellen128.1764931965" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.hellen128.3891845784" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="NONE","P36_IN_O2S","P32_IN_O2S2","P40_IN_MAP3","C24 - PPS1","E31 - TPS1","Battery Sense","E40 - IN_CAM","P30_IN_AUX4","E34 - TPS2","E37 - Crank Input","E47 - MAF","E23 - MAP","E29 - Coolant Temp","E45 - IAT","C25 - PPS2","P41_IN_AUX3"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:50:42 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:37:08 UTC 2023

 pageSize            = 23880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7936,6 +7938,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini
+++ b/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.hellen154hyundai.2487429803"
+	signature	= "rusEFI master.2023.12.10.hellen154hyundai.445204814"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.hellen154hyundai.2487429803" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.hellen154hyundai.445204814" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="NONE","K21 Ambient Temperature","K58 Oil Temp","K54 A/C pressure","PPS 1","TPS 1","K2 Ignition Key Voltage","X10 AIN2","INVALID","TPS 2","X11 AIN1","Map Sensor K31","K10 Sensor","CLT","IAT","PPS 2"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:50:53 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:37:18 UTC 2023

 pageSize            = 23880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7920,6 +7922,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_hellen72.ini
+++ b/firmware/tunerstudio/generated/rusefi_hellen72.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.hellen72.3399759930"
+	signature	= "rusEFI master.2023.12.10.hellen72.1148083167"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.hellen72.3399759930" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.hellen72.1148083167" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="NONE","5N - TPS2","3L - IGN_7 / AFR","intMAP (A15)","5P - PPS1","4V - TPS (A17)","4S/4T - Alternator voltage","3V - CAM (A19)","4J - VTCS/AUX4 (A20)","4F - AC_PRES/AUX1 (A23)","3Y - CRANK (A24)","4X - MAF (A9)","4U - MAP2/Ign8 (A10)","4P - CLT (A11)","4N - IAT (A14)","5M - PPS2 OR TEMPERATURE SENSOR","4AE - EGR/MAP4 (A22)"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:51:03 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:37:29 UTC 2023

 pageSize            = 23880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7937,6 +7939,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_hellen81.ini
+++ b/firmware/tunerstudio/generated/rusefi_hellen81.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.hellen81.2075380856"
+	signature	= "rusEFI master.2023.12.10.hellen81.4118392733"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.hellen81.2075380856" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.hellen81.4118392733" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="NONE","18 - IN_O2S","55 - IN_O2S2","41 - IN_MAP3","78 - IN_PPS","16 - IN_TPS","13 - IN_VIGN","79 - IN_CAM","77 - IN_AUX4","74 - IN_AUX1","15 - IN_CRANK (A24)","37 - IN_MAP1","38 - IN_MAP2","39 - IN_CLT","40 - IN_IAT","75 - IN_AUX2","76 - IN_AUX3"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:51:06 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:37:31 UTC 2023

 pageSize            = 23880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7935,6 +7937,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini
+++ b/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.hellen88bmw.1220916179"
+	signature	= "rusEFI master.2023.12.10.hellen88bmw.3322925110"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.hellen88bmw.1220916179" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.hellen88bmw.3322925110" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="NONE","VIN5","VIN6","INVALID","PPS1","73 - TPS","56 - Battery Sense","17 - CAM","Aux BARO","Aux TPS2","16 - CRANK","41 - MAF","Aux MAP","78 - CLT","77 - IAT","Aux PPS2","Aux TPS3"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:50:56 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:37:21 UTC 2023

 pageSize            = 23880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7936,6 +7938,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_hellenNA6.ini
+++ b/firmware/tunerstudio/generated/rusefi_hellenNA6.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.hellenNA6.1307419187"
+	signature	= "rusEFI master.2023.12.10.hellenNA6.3274162646"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.hellenNA6.1307419187" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.hellenNA6.3274162646" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="NONE","3N - O2S","2N - Temperature Sensor","intMAP (A15)","4I - PPS1","TPS Input","1B - Battery Sense","INVALID","4G - PPS2 OR TEMPERATURE SENSOR","4H - TPS2","INVALID","3O - MAF","2M - Pressure Sensor","3Q - CLT","3P - IAT","1V - Clutch Switch","1Q AC Switch"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:51:13 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:37:39 UTC 2023

 pageSize            = 23880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7937,6 +7939,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini
+++ b/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.hellenNA8_96.726446844"
+	signature	= "rusEFI master.2023.12.10.hellenNA8_96.2777075993"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.hellenNA8_96.726446844" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.hellenNA8_96.2777075993" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="NONE","2C - O2S","TPS1","intMAP","PPS1","2F - TPS","3B - Battery Sense","3G - CAM","3S - EGR BOOST IN","2A - Pressure Input","3F - CRANK","2B - MAF","INVALID","2G - Coolant","2B - IAT","4C - IN TEMP/PPS2","1K - AC Switch"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:51:16 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:37:41 UTC 2023

 pageSize            = 23880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7937,6 +7939,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_kin.ini
+++ b/firmware/tunerstudio/generated/rusefi_kin.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.kin.3828480441"
+	signature	= "rusEFI master.2023.12.10.kin.1794873948"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.kin.3828480441" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.kin.1794873948" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="Disabled", "PA2", "PA3", "INVALID", "PD3", "INVALID", "INVALID", "INVALID", "PB12", "PB13", "INVALID", "PE2", "INVALID", "PC14", "PC15", "PC16", "PC17"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:50:21 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:36:48 UTC 2023

 pageSize            = 22504
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7947,6 +7949,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_m74_9.ini
+++ b/firmware/tunerstudio/generated/rusefi_m74_9.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.m74_9.787384381"
+	signature	= "rusEFI master.2023.12.10.m74_9.2686774232"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.m74_9.787384381" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.m74_9.2686774232" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="NONE","INVALID","MAF/MAP sensor signal","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","Pedal position sensor 1 signal","Pedal position sensor 2 signal","ETB position sensor 1 signal","ETB position sensor 2 signal"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:51:26 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:37:51 UTC 2023

 pageSize            = 23880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7937,6 +7939,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_mre_f4.ini
+++ b/firmware/tunerstudio/generated/rusefi_mre_f4.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.mre_f4.2240665495"
+	signature	= "rusEFI master.2023.12.10.mre_f4.189248626"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.mre_f4.2240665495" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.mre_f4.189248626" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="NONE","18 - AN temp 1","23 - AN temp 2","24 - AN temp 3 or Hall Input","22 - AN temp 4 or Hall Input","28 - AN volt 10, Aux Reuse","INVALID","26 - AN volt 2","31 - AN volt 3","36 - AN volt 8, Aux Reuse","40 - AN volt 9, Aux Reuse","27 - AN volt 1","Battery Sense","19 - AN volt 4","20 - AN volt 5","32 - AN volt 6, Aux Reuse","30 - AN volt 7"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:51:24 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:37:48 UTC 2023

 pageSize            = 23880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7936,6 +7938,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_mre_f7.ini
+++ b/firmware/tunerstudio/generated/rusefi_mre_f7.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.mre_f7.2240665495"
+	signature	= "rusEFI master.2023.12.10.mre_f7.189248626"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.mre_f7.2240665495" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.mre_f7.189248626" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="NONE","18 - AN temp 1","23 - AN temp 2","24 - AN temp 3 or Hall Input","22 - AN temp 4 or Hall Input","28 - AN volt 10, Aux Reuse","INVALID","26 - AN volt 2","31 - AN volt 3","36 - AN volt 8, Aux Reuse","40 - AN volt 9, Aux Reuse","27 - AN volt 1","Battery Sense","19 - AN volt 4","20 - AN volt 5","32 - AN volt 6, Aux Reuse","30 - AN volt 7"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:51:21 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:37:46 UTC 2023

 pageSize            = 23880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7936,6 +7938,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_nucleo_f429.ini
+++ b/firmware/tunerstudio/generated/rusefi_nucleo_f429.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.nucleo_f429.2799713815"
+	signature	= "rusEFI master.2023.12.10.nucleo_f429.673865202"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.nucleo_f429.2799713815" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.nucleo_f429.673865202" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:51:52 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:38:15 UTC 2023

 pageSize            = 23880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7946,6 +7948,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_nucleo_f767.ini
+++ b/firmware/tunerstudio/generated/rusefi_nucleo_f767.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.nucleo_f767.2799713815"
+	signature	= "rusEFI master.2023.12.10.nucleo_f767.673865202"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.nucleo_f767.2799713815" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.nucleo_f767.673865202" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:51:55 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:38:17 UTC 2023

 pageSize            = 23880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7946,6 +7948,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_nucleo_h743.ini
+++ b/firmware/tunerstudio/generated/rusefi_nucleo_h743.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.nucleo_h743.2799713815"
+	signature	= "rusEFI master.2023.12.10.nucleo_h743.673865202"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.nucleo_h743.2799713815" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.nucleo_h743.673865202" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:51:57 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:38:20 UTC 2023

 pageSize            = 23880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7946,6 +7948,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_prometheus_405.ini
+++ b/firmware/tunerstudio/generated/rusefi_prometheus_405.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.prometheus_405.2524246919"
+	signature	= "rusEFI master.2023.12.10.prometheus_405.415141986"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.prometheus_405.2524246919" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.prometheus_405.415141986" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:51:39 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:38:03 UTC 2023

 pageSize            = 23880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7941,6 +7943,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_prometheus_469.ini
+++ b/firmware/tunerstudio/generated/rusefi_prometheus_469.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.prometheus_469.2524246919"
+	signature	= "rusEFI master.2023.12.10.prometheus_469.415141986"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.prometheus_469.2524246919" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.prometheus_469.415141986" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:51:37 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:38:01 UTC 2023

 pageSize            = 23880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7941,6 +7943,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_proteus_f4.ini
+++ b/firmware/tunerstudio/generated/rusefi_proteus_f4.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.proteus_f4.2800992365"
+	signature	= "rusEFI master.2023.12.10.proteus_f4.674866056"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.proteus_f4.2800992365" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.proteus_f4.674866056" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="NONE","Analog Volt 5","Analog Volt 6","Analog Volt 7","Analog Volt 8","Analog Volt 9","Analog Volt 10","Analog Volt 11","Battery Sense","Analog Temp 3","Analog Temp 4","Analog Volt 1","Analog Volt 2","Analog Volt 3","Analog Volt 4","Analog Temp 1","Analog Temp 2"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:51:45 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:38:08 UTC 2023

 pageSize            = 27880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7940,6 +7942,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_proteus_f7.ini
+++ b/firmware/tunerstudio/generated/rusefi_proteus_f7.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.proteus_f7.2800992365"
+	signature	= "rusEFI master.2023.12.10.proteus_f7.674866056"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.proteus_f7.2800992365" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.proteus_f7.674866056" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="NONE","Analog Volt 5","Analog Volt 6","Analog Volt 7","Analog Volt 8","Analog Volt 9","Analog Volt 10","Analog Volt 11","Battery Sense","Analog Temp 3","Analog Temp 4","Analog Volt 1","Analog Volt 2","Analog Volt 3","Analog Volt 4","Analog Temp 1","Analog Temp 2"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:51:42 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:38:05 UTC 2023

 pageSize            = 27880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7940,6 +7942,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_proteus_h7.ini
+++ b/firmware/tunerstudio/generated/rusefi_proteus_h7.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.proteus_h7.2800992365"
+	signature	= "rusEFI master.2023.12.10.proteus_h7.674866056"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.proteus_h7.2800992365" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.proteus_h7.674866056" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="NONE","Analog Volt 5","Analog Volt 6","Analog Volt 7","Analog Volt 8","Analog Volt 9","Analog Volt 10","Analog Volt 11","Battery Sense","Analog Temp 3","Analog Temp 4","Analog Volt 1","Analog Volt 2","Analog Volt 3","Analog Volt 4","Analog Temp 1","Analog Temp 2"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:51:47 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:38:10 UTC 2023

 pageSize            = 27880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7940,6 +7942,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_s105.ini
+++ b/firmware/tunerstudio/generated/rusefi_s105.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.s105.3385581169"
+	signature	= "rusEFI master.2023.12.10.s105.1191296404"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.s105.3385581169" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.s105.1191296404" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="NONE","56 - MAP","16 - TPS","19 - Knock","39 - CLT","INVALID","opt 55 - AFR 2","opt 21 - AC Press","18 - AFR 1","13 - Ignition switch in (15)","44 - +12 sense (MR)","INVALID","na 37 - MAF","INVALID","INVALID","40 - IAT"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:51:29 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:37:53 UTC 2023

 pageSize            = 23880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7937,6 +7939,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_small-can-board.ini
+++ b/firmware/tunerstudio/generated/rusefi_small-can-board.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.small-can-board.2876244507"
+	signature	= "rusEFI master.2023.12.10.small-can-board.632971774"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.small-can-board.2876244507" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.small-can-board.632971774" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="NONE","INVALID","INVALID","B2 - Analog/Digital Input","B3 - Analog/Digital Input","B4 - Analog/Digital Input","B5 - Analog/Digital Input","B7 - Analog/Digital Input","C1 - Analog/Digital Input","INVALID","INVALID","INVALID","A2 Battery Sense","INVALID","INVALID","C2 - Analog/Digital Input","C4 - Analog/Digital Input"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:51:19 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:37:43 UTC 2023

 pageSize            = 23880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7938,6 +7940,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini
+++ b/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.subaru_eg33_f7.2708338944"
+	signature	= "rusEFI master.2023.12.10.subaru_eg33_f7.799513317"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.subaru_eg33_f7.2708338944" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.subaru_eg33_f7.799513317" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="NONE","AUX0_18 - MAP Ain","INVALID","INVALID","B05 - MAF Ain","INVALID","AUX0_19 - IAT Ain","A02 - VBat","INVALID","A06 - Oxyg 2 Ain","A04 - EGR t Ain","INVALID","A18 - AUX0 Ain","B02 - TPS Ain","INVALID","A03 - Coolant t Ain","A06 - Oxyg 1 Ain"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:50:24 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:36:50 UTC 2023

 pageSize            = 23880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7946,6 +7948,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_t-b-g.ini
+++ b/firmware/tunerstudio/generated/rusefi_t-b-g.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.t-b-g.2799713815"
+	signature	= "rusEFI master.2023.12.10.t-b-g.673865202"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.t-b-g.2799713815" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.t-b-g.673865202" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:51:32 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:37:56 UTC 2023

 pageSize            = 23880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7946,6 +7948,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini
+++ b/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.tdg-pdm8.743313973"
+	signature	= "rusEFI master.2023.12.10.tdg-pdm8.2726588880"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.tdg-pdm8.743313973" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.tdg-pdm8.2726588880" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="NONE","INVALID","INVALID","INVALID","INVALID","Battery Sense","INVALID","INVALID","INVALID","Sense 7","Sense 8","Sense 1","Sense 2","Sense 3","Sense 4","Sense 5","Sense 6"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:52:02 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:38:25 UTC 2023

 pageSize            = 23880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7946,6 +7948,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/firmware/tunerstudio/generated/rusefi_uaefi.ini
+++ b/firmware/tunerstudio/generated/rusefi_uaefi.ini
@ -34,12 +34,12 @@ enable2ndByteCanID = false

 [MegaTune]
 ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201
-	signature	= "rusEFI master.2023.12.10.uaefi.238822305"
+	signature	= "rusEFI master.2023.12.10.uaefi.2163621956"

 [TunerStudio]
 	queryCommand	= "S"
 	versionInfo	= "V"  ; firmware version for title bar.
-	signature= "rusEFI master.2023.12.10.uaefi.238822305" ; signature is expected to be 7 or more characters.
+	signature= "rusEFI master.2023.12.10.uaefi.2163621956" ; signature is expected to be 7 or more characters.

 	; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C
 	useLegacyFTempUnits = false
@ -92,7 +92,7 @@ enable2ndByteCanID = false
 #define adc_channel_e_list="NONE","D1 AUX1","C3 AUX2","INVALID","D6 PPS1","D13 TPS1","A7 Voltage From Key","INVALID","INVALID","C14 TPS2","INVALID","D9 MAP","INVALID","D16 CLT","D15 IAT","C4 PPS2","C15 AUX3"

 ; CONFIG_DEFINITION_START
-; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:50:58 UTC 2023
+; this section was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:37:24 UTC 2023

 pageSize            = 23880
 page = 1
@ -512,6 +512,8 @@ boostPid_periodMs = scalar, S16, 958, "ms", 1, 0, 0, 3000, 0
 boostPid_minValue = scalar, S16, 960, "", 1, 0, -30000, 30000, 0
 boostPid_maxValue = scalar, S16, 962, "", 1, 0, -30000, 30000, 0
 boostType = bits, U08, 964, [0:0], "Open Loop", "Open + Closed Loop"
+ignitionKeyDigitalPinMode = bits, U08, 965, [0:1], "DEFAULT", "PULLUP", "PULLDOWN"
+ignitionKeyDigitalPin = bits, U16, 966, [0:7], $gpio_list
 boostPwmFrequency = scalar, S32, 968, "Hz", 1, 0, 0, 3000, 0
 launchActivationMode = bits, S08, 972, [0:1], "Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"
 antiLagActivationMode = bits, S08, 973, [0:0], "Switch Input", "Always Active"
@ -7921,6 +7923,8 @@ dialog = lambda_monitorDialog, "lambda_monitor"
 ;			Engine->Battery & Alternator
 	dialog = batteryDialog, "Battery Settings",	yAxis
 		field = "vBatt ADC input",						vbattAdcChannel
+		field = "Ignition Key Switch",                  ignitionKeyDigitalPin
+		field = "Ignition Key Switch Mode",             ignitionKeyDigitalPinMode
 		field = "Battery Input Divider Coefficient",	vbattDividerCoeff
 	dialog = alternator, "Alternator Settings",	yAxis
 		field = "Enabled",								isAlternatorControlEnabled
--- a/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java
+++ b/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java
@ -1,6 +1,6 @@
 package com.rusefi.config.generated;

-// this file was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 15:52:12 UTC 2023
+// this file was generated automatically by rusEFI tool config_definition.jar based on (unknown script) integration/rusefi_config.txt Sun Dec 10 16:38:34 UTC 2023

 // by class com.rusefi.output.FileJavaFieldsConsumer
 import com.rusefi.config.*;
@ -1084,7 +1084,6 @@ public class Fields {
 	public static final int SentEtbType_FORD_TYPE_1 = 2;
 	public static final int SentEtbType_GM_TYPE_1 = 1;
 	public static final int SentEtbType_NONE = 0;
-	public static final int SIGNATURE_HASH = 543073412;
 	public static final String SIMULATOR_TUNE_BIN_FILE_NAME = "generated/simulator_tune_image.bin";
 	public static final String SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX = "generated/simulator_tune_image";
 	public static final String SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX = ".bin";
@ -1313,7 +1312,7 @@ public class Fields {
 	public static final int TS_RESPONSE_UNDERRUN = 0x80;
 	public static final int TS_RESPONSE_UNRECOGNIZED_COMMAND = 0x83;
 	public static final char TS_SET_LOGGER_SWITCH = 'l';
-	public static final String TS_SIGNATURE = "rusEFI master.2023.12.10.f407-discovery.543073412";
+	public static final String TS_SIGNATURE = "rusEFI master.2023.12.10.f407-discovery.2928985953";
 	public static final char TS_SIMULATE_CAN = '>';
 	public static final char TS_SINGLE_WRITE_COMMAND = 'W';
 	public static final char TS_TEST_COMMAND = 't';
@ -1837,7 +1836,8 @@ public class Fields {
 	public static final Field BOOSTPID_MINVALUE = Field.create("BOOSTPID_MINVALUE", 960, FieldType.INT16).setScale(1.0).setBaseOffset(0);
 	public static final Field BOOSTPID_MAXVALUE = Field.create("BOOSTPID_MAXVALUE", 962, FieldType.INT16).setScale(1.0).setBaseOffset(0);
 	public static final Field BOOSTTYPE = Field.create("BOOSTTYPE", 964, FieldType.INT8).setScale(1.0).setBaseOffset(0);
-	public static final Field ALIGNMENTFILL_AT_965 = Field.create("ALIGNMENTFILL_AT_965", 965, FieldType.INT8).setScale(1.0).setBaseOffset(0);
+	public static final Field IGNITIONKEYDIGITALPINMODE = Field.create("IGNITIONKEYDIGITALPINMODE", 965, FieldType.INT8, pin_input_mode_e).setScale(1.0).setBaseOffset(0);
+	public static final Field IGNITIONKEYDIGITALPIN = Field.create("IGNITIONKEYDIGITALPIN", 966, FieldType.INT16, Gpio).setScale(1.0).setBaseOffset(0);
 	public static final Field BOOSTPWMFREQUENCY = Field.create("BOOSTPWMFREQUENCY", 968, FieldType.INT).setScale(1.0).setBaseOffset(0);
 	public static final String[] launchActivationMode_e = {"Launch Button", "Clutch Down Switch", "Always Active(Disabled By Speed)"};
 	public static final Field LAUNCHACTIVATIONMODE = Field.create("LAUNCHACTIVATIONMODE", 972, FieldType.INT8, launchActivationMode_e).setScale(1.0).setBaseOffset(0);
@ -3425,7 +3425,8 @@ public class Fields {
 	BOOSTPID_MINVALUE,
 	BOOSTPID_MAXVALUE,
 	BOOSTTYPE,
-	ALIGNMENTFILL_AT_965,
+	IGNITIONKEYDIGITALPINMODE,
+	IGNITIONKEYDIGITALPIN,
 	BOOSTPWMFREQUENCY,
 	LAUNCHACTIVATIONMODE,
 	ANTILAGACTIVATIONMODE,