Fixes confirmed on the real car (#5638)

Co-authored-by: pchmura4 <>

firmware/config/engines/honda_k_dbc.cpp

@@ -44,7 +44,7 @@ void setHondaK() {
 
 	engineConfiguration->crankingIACposition = 70;
 	static const uint16_t defaultPostCrankinDurationBins[] = {
-		0, 35, 65, 100, 125, 150, 200, 250
+		0, 65, 100, 125, 150, 250
 	};
 	copyArray(engineConfiguration->postCrankingDurationBins, defaultPostCrankinDurationBins);
 	setTable(engineConfiguration->postCrankingFactor, 1.25f);

firmware/controllers/actuators/idle_thread.cpp

@@ -76,6 +76,12 @@ IIdleController::Phase IdleController::determinePhase(int rpm, int targetRpm, Se
 	}
 #endif // EFI_SHAFT_POSITION_INPUT
 
+	// If we are entering idle, and the PID settings are aggressive, it's good to make a soft entry upon entering closed loop
+	if (m_crankTaperEndTime == 0.0f) {
+		m_crankTaperEndTime = engine->fuelComputer.running.timeSinceCrankingInSecs;
+		m_idleTimingSoftEntryEndTime = m_crankTaperEndTime + engineConfiguration->idleTimingSoftEntryTime;
+	}
+
 	// No other conditions met, we are idling!
 	return Phase::Idling;
 }
@@ -187,18 +193,12 @@ float IdleController::getIdleTimingAdjustment(int rpm, int targetRpm, Phase phas
 	if (phase != Phase::Idling) {
 		m_timingPid.reset();
 		return 0;
-	} else {
-		// If we are entering idle, and the PID settings are aggressive, it's good to make a soft entry upon entering closed loop
-		if (m_lastPhase == Phase::CrankToIdleTaper) {
-			m_crankTaperEndTime = engine->fuelComputer.running.timeSinceCrankingInSecs;
-			m_idleTimingSoftEntryEndTime = m_crankTaperEndTime + engineConfiguration->idleTimingSoftEntryTime;
 	}
+	
 	if (engineConfiguration->idleTimingSoftEntryTime > 0.0f) {
 		// Use interpolation for correction taper
 		m_timingPid.setErrorAmplification(interpolateClamped(m_crankTaperEndTime, 0.0f, m_idleTimingSoftEntryEndTime, 1.0f, engine->fuelComputer.running.timeSinceCrankingInSecs));
 	}
-	}
-
 
 	// We're now in the idle mode, and RPM is inside the Timing-PID regulator work zone!
 	return m_timingPid.getOutput(targetRpm, rpm, FAST_CALLBACK_PERIOD_MS / 1000.0f);

firmware/controllers/algo/defaults/default_cranking.cpp

@@ -24,10 +24,10 @@ void setDefaultCranking() {
 #if !EFI_UNIT_TEST
 	// don't set this for unit tests, as it makes things more complicated to test
 	static const float defaultPostCrankingCLTBins[] = {
-		-20.0f, 0.0f, 30.0f, 60.0f
+		-20.0f, 0.0f, 20.0f, 40.0f, 60.0f, 80.0f
 	};
 	static const uint16_t defaultPostCrankinDurationBins[] = {
-		0, 15, 35, 50, 65, 100, 125, 150
+		0, 15, 35, 65, 100, 150
 	};
 	copyArray(engineConfiguration->postCrankingCLTBins, defaultPostCrankingCLTBins);
 	copyArray(engineConfiguration->postCrankingDurationBins, defaultPostCrankinDurationBins);

firmware/integration/rusefi_config.txt

@@ -177,6 +177,8 @@ struct_no_prefix engine_configuration_s
 
 #define CRANKING_CURVE_SIZE 8
 
+#define CRANKING_ENRICH_COUNT 6
+
 #define IGN_LOAD_COUNT 16
 #define IGN_RPM_COUNT 16
 
@@ -1247,9 +1249,9 @@ tle8888_mode_e tle8888mode;
 	pin_output_mode_e fan2PinMode;
 	float fuelReferencePressure;This is the pressure at which your injector flow is known.\nFor example if your injectors flow 400cc/min at 3.5 bar, enter 350kpa here.;"kPa", 1, 0, 50, 700000, 0
 
-	float[CRANKING_ADVANCE_CURVE_SIZE x DWELL_CURVE_SIZE] postCrankingFactor;;"mult", 1, 0, 1, 3, 2
-	float[CRANKING_ADVANCE_CURVE_SIZE] postCrankingCLTBins;;"C", 1, 0, -100, 100, 0
-	float[DWELL_CURVE_SIZE] postCrankingDurationBins;;"count", 1, 0, 0, 1000, 0
+	float[CRANKING_ENRICH_COUNT x CRANKING_ENRICH_COUNT] postCrankingFactor;;"mult", 1, 0, 1, 3, 2
+	float[CRANKING_ENRICH_COUNT] postCrankingDurationBins;;"count", 1, 0, 0, 1000, 0
+	float[CRANKING_ENRICH_COUNT] postCrankingCLTBins;;"C", 1, 0, -100, 100, 0
 
 	ThermistorConf auxTempSensor1
 	ThermistorConf auxTempSensor2
@@ -1356,7 +1358,7 @@ tChargeMode_e tChargeMode;
 	int16_t etb_iTermMax;iTerm max value;"", 1, 0, -30000, 30000, 0
 
 	pid_s idleTimingPid;See useIdleTimingPidControl
-	float idleTimingSoftEntryTime
+	float idleTimingSoftEntryTime;When entering idle, and the PID settings are aggressive, it's good to make a soft entry upon entering closed loop;"", 1, 0, 0, 100, 1
 
 	int16_t etbRocExpAverageLength;By the way ETB PID runs at 500hz, length in 1/500 of second here.
 

firmware/tunerstudio/rusefi.input

@@ -1305,7 +1305,7 @@ curve = rangeMatrix, "Range Switch Input Matrix"
 		zBins	= hpfpCompensation
 
 	table = postCrankingEnrichmentTbl, postCrankingEnrichmentMap, "After start enrichment", 1
-		xBins	= postCrankingDurationBins, engineCycles
+		xBins	= postCrankingDurationBins, seconds ; TODO "engineCycles" should be there
 		yBins	= postCrankingCLTBins, coolant
 		zBins	= postCrankingFactor