diff --git a/firmware/controllers/generated/rusefi_generated_alphax-2chan.h b/firmware/controllers/generated/rusefi_generated_alphax-2chan.h index 536ea6eddc..2502447452 100644 --- a/firmware/controllers/generated/rusefi_generated_alphax-2chan.h +++ b/firmware/controllers/generated/rusefi_generated_alphax-2chan.h @@ -1288,7 +1288,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 179035400 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 1437632165 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1590,6 +1591,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider false +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1621,6 +1623,7 @@ #define ts_show_ego2 true #define ts_show_egt false #define ts_show_etb false +#define ts_show_etb_bias_curve true #define ts_show_etb_pins false #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1705,7 +1708,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.alphax-2chan.179035400" +#define TS_SIGNATURE "rusEFI master.2024.07.20.alphax-2chan.1437632165" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_alphax-4chan.h b/firmware/controllers/generated/rusefi_generated_alphax-4chan.h index 22a7a10c5c..60804bb575 100644 --- a/firmware/controllers/generated/rusefi_generated_alphax-4chan.h +++ b/firmware/controllers/generated/rusefi_generated_alphax-4chan.h @@ -1289,7 +1289,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 3664394221 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 2238803008 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1591,6 +1592,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider false +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1622,6 +1624,7 @@ #define ts_show_ego2 true #define ts_show_egt false #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins false #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1706,7 +1709,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.alphax-4chan.3664394221" +#define TS_SIGNATURE "rusEFI master.2024.07.20.alphax-4chan.2238803008" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_alphax-4chan_f7.h b/firmware/controllers/generated/rusefi_generated_alphax-4chan_f7.h index 3850593fb1..44ada819fd 100644 --- a/firmware/controllers/generated/rusefi_generated_alphax-4chan_f7.h +++ b/firmware/controllers/generated/rusefi_generated_alphax-4chan_f7.h @@ -1289,7 +1289,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 3664394221 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 2238803008 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1591,6 +1592,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider false +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1622,6 +1624,7 @@ #define ts_show_ego2 true #define ts_show_egt false #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins false #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1706,7 +1709,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.alphax-4chan_f7.3664394221" +#define TS_SIGNATURE "rusEFI master.2024.07.20.alphax-4chan_f7.2238803008" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_alphax-8chan-revA.h b/firmware/controllers/generated/rusefi_generated_alphax-8chan-revA.h index 18b34fc0aa..23986bb3e7 100644 --- a/firmware/controllers/generated/rusefi_generated_alphax-8chan-revA.h +++ b/firmware/controllers/generated/rusefi_generated_alphax-8chan-revA.h @@ -1288,7 +1288,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 3630593746 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 2273127807 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1590,6 +1591,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider false +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1621,6 +1623,7 @@ #define ts_show_ego2 true #define ts_show_egt false #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins false #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1705,7 +1708,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.alphax-8chan-revA.3630593746" +#define TS_SIGNATURE "rusEFI master.2024.07.20.alphax-8chan-revA.2273127807" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_alphax-8chan.h b/firmware/controllers/generated/rusefi_generated_alphax-8chan.h index cf775cd2e1..0ce23a84a5 100644 --- a/firmware/controllers/generated/rusefi_generated_alphax-8chan.h +++ b/firmware/controllers/generated/rusefi_generated_alphax-8chan.h @@ -1288,7 +1288,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 3654662667 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 2261705126 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1590,6 +1591,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider false +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1621,6 +1623,7 @@ #define ts_show_ego2 true #define ts_show_egt false #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins false #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1705,7 +1708,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.alphax-8chan.3654662667" +#define TS_SIGNATURE "rusEFI master.2024.07.20.alphax-8chan.2261705126" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_alphax-8chan_f7.h b/firmware/controllers/generated/rusefi_generated_alphax-8chan_f7.h index dbe965dae6..d8be288676 100644 --- a/firmware/controllers/generated/rusefi_generated_alphax-8chan_f7.h +++ b/firmware/controllers/generated/rusefi_generated_alphax-8chan_f7.h @@ -1288,7 +1288,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 3654662667 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 2261705126 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1590,6 +1591,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider false +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1621,6 +1623,7 @@ #define ts_show_ego2 true #define ts_show_egt false #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins false #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1705,7 +1708,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.alphax-8chan_f7.3654662667" +#define TS_SIGNATURE "rusEFI master.2024.07.20.alphax-8chan_f7.2261705126" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_alphax-silver.h b/firmware/controllers/generated/rusefi_generated_alphax-silver.h index 572e63d2dd..b2dcba9fbb 100644 --- a/firmware/controllers/generated/rusefi_generated_alphax-silver.h +++ b/firmware/controllers/generated/rusefi_generated_alphax-silver.h @@ -1287,7 +1287,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 1188898185 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 432438820 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1589,6 +1590,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider false +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1620,6 +1622,7 @@ #define ts_show_ego2 true #define ts_show_egt false #define ts_show_etb false +#define ts_show_etb_bias_curve true #define ts_show_etb_pins false #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1704,7 +1707,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.alphax-silver.1188898185" +#define TS_SIGNATURE "rusEFI master.2024.07.20.alphax-silver.432438820" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_at_start_f435.h b/firmware/controllers/generated/rusefi_generated_at_start_f435.h index 2b810bb5b5..7cf3b93bd5 100644 --- a/firmware/controllers/generated/rusefi_generated_at_start_f435.h +++ b/firmware/controllers/generated/rusefi_generated_at_start_f435.h @@ -1290,7 +1290,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 2070097455 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 611874178 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1592,6 +1593,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider true +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1623,6 +1625,7 @@ #define ts_show_ego2 true #define ts_show_egt true #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins true #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1707,7 +1710,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.at_start_f435.2070097455" +#define TS_SIGNATURE "rusEFI master.2024.07.20.at_start_f435.611874178" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_atlas.h b/firmware/controllers/generated/rusefi_generated_atlas.h index bcef78f771..c38dee63dd 100644 --- a/firmware/controllers/generated/rusefi_generated_atlas.h +++ b/firmware/controllers/generated/rusefi_generated_atlas.h @@ -1290,7 +1290,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 1063582305 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 1618977228 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1592,6 +1593,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider true +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1623,6 +1625,7 @@ #define ts_show_ego2 true #define ts_show_egt true #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins false #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1707,7 +1710,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.atlas.1063582305" +#define TS_SIGNATURE "rusEFI master.2024.07.20.atlas.1618977228" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_f407-discovery.h b/firmware/controllers/generated/rusefi_generated_f407-discovery.h index 4d1228a375..3197abb1c2 100644 --- a/firmware/controllers/generated/rusefi_generated_f407-discovery.h +++ b/firmware/controllers/generated/rusefi_generated_f407-discovery.h @@ -1290,7 +1290,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets true -#define SIGNATURE_HASH 3744650574 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 2150207203 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1592,6 +1593,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider true +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1623,6 +1625,7 @@ #define ts_show_ego2 true #define ts_show_egt true #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins true #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1707,7 +1710,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.f407-discovery.3744650574" +#define TS_SIGNATURE "rusEFI master.2024.07.20.f407-discovery.2150207203" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_f429-discovery.h b/firmware/controllers/generated/rusefi_generated_f429-discovery.h index 6a17acb074..92103710ac 100644 --- a/firmware/controllers/generated/rusefi_generated_f429-discovery.h +++ b/firmware/controllers/generated/rusefi_generated_f429-discovery.h @@ -1290,7 +1290,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 2070097455 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 611874178 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1592,6 +1593,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider true +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1623,6 +1625,7 @@ #define ts_show_ego2 true #define ts_show_egt true #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins true #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1707,7 +1710,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.f429-discovery.2070097455" +#define TS_SIGNATURE "rusEFI master.2024.07.20.f429-discovery.611874178" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_f469-discovery.h b/firmware/controllers/generated/rusefi_generated_f469-discovery.h index 23595596dd..72540728b2 100644 --- a/firmware/controllers/generated/rusefi_generated_f469-discovery.h +++ b/firmware/controllers/generated/rusefi_generated_f469-discovery.h @@ -1290,7 +1290,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 1236543676 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 380597009 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1592,6 +1593,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider true +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1623,6 +1625,7 @@ #define ts_show_ego2 true #define ts_show_egt true #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins true #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1707,7 +1710,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.f469-discovery.1236543676" +#define TS_SIGNATURE "rusEFI master.2024.07.20.f469-discovery.380597009" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_frankenso_na6.h b/firmware/controllers/generated/rusefi_generated_frankenso_na6.h index 4feac37771..e807db3fa8 100644 --- a/firmware/controllers/generated/rusefi_generated_frankenso_na6.h +++ b/firmware/controllers/generated/rusefi_generated_frankenso_na6.h @@ -1290,7 +1290,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets true -#define SIGNATURE_HASH 769677876 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 1929052569 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1592,6 +1593,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider true +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1623,6 +1625,7 @@ #define ts_show_ego2 true #define ts_show_egt true #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins true #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1707,7 +1710,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.frankenso_na6.769677876" +#define TS_SIGNATURE "rusEFI master.2024.07.20.frankenso_na6.1929052569" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_haba208.h b/firmware/controllers/generated/rusefi_generated_haba208.h index 685c334de3..8bab1449a1 100644 --- a/firmware/controllers/generated/rusefi_generated_haba208.h +++ b/firmware/controllers/generated/rusefi_generated_haba208.h @@ -1290,7 +1290,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 2070097455 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 611874178 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1592,6 +1593,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider true +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1623,6 +1625,7 @@ #define ts_show_ego2 true #define ts_show_egt true #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins true #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1707,7 +1710,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.haba208.2070097455" +#define TS_SIGNATURE "rusEFI master.2024.07.20.haba208.611874178" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_hellen-112-17.h b/firmware/controllers/generated/rusefi_generated_hellen-112-17.h index f919ee4107..0efbee5773 100644 --- a/firmware/controllers/generated/rusefi_generated_hellen-112-17.h +++ b/firmware/controllers/generated/rusefi_generated_hellen-112-17.h @@ -1291,7 +1291,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 4067145387 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 2909859078 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1593,6 +1594,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider false +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1624,6 +1626,7 @@ #define ts_show_ego2 true #define ts_show_egt false #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins false #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1708,7 +1711,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen-112-17.4067145387" +#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen-112-17.2909859078" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_hellen-gm-e67.h b/firmware/controllers/generated/rusefi_generated_hellen-gm-e67.h index 83e731bf2f..a501bbbd32 100644 --- a/firmware/controllers/generated/rusefi_generated_hellen-gm-e67.h +++ b/firmware/controllers/generated/rusefi_generated_hellen-gm-e67.h @@ -1290,7 +1290,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 3071953303 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 3892384314 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1592,6 +1593,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider false +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1623,6 +1625,7 @@ #define ts_show_ego2 true #define ts_show_egt false #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins false #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1707,7 +1710,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen-gm-e67.3071953303" +#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen-gm-e67.3892384314" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_hellen-honda-k.h b/firmware/controllers/generated/rusefi_generated_hellen-honda-k.h index cbbe3d3225..36f8ba6deb 100644 --- a/firmware/controllers/generated/rusefi_generated_hellen-honda-k.h +++ b/firmware/controllers/generated/rusefi_generated_hellen-honda-k.h @@ -1289,7 +1289,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 2046998629 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 622453704 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1592,6 +1593,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider false +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 false #define ts_show_bank2_cam2 false @@ -1624,6 +1626,7 @@ #define ts_show_ego2 true #define ts_show_egt false #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins false #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1708,7 +1711,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen-honda-k.2046998629" +#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen-honda-k.622453704" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_hellen-nb1.h b/firmware/controllers/generated/rusefi_generated_hellen-nb1.h index e10f112e48..777c0a3ecf 100644 --- a/firmware/controllers/generated/rusefi_generated_hellen-nb1.h +++ b/firmware/controllers/generated/rusefi_generated_hellen-nb1.h @@ -1291,7 +1291,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 2457589775 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 3445654434 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1593,6 +1594,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider false +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1624,6 +1626,7 @@ #define ts_show_ego2 true #define ts_show_egt false #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins false #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1708,7 +1711,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen-nb1.2457589775" +#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen-nb1.3445654434" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_hellen121nissan.h b/firmware/controllers/generated/rusefi_generated_hellen121nissan.h index 5263045716..d4ccfa6c4d 100644 --- a/firmware/controllers/generated/rusefi_generated_hellen121nissan.h +++ b/firmware/controllers/generated/rusefi_generated_hellen121nissan.h @@ -1291,7 +1291,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 3742551637 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 2148111864 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1593,6 +1594,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider false +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1624,6 +1626,7 @@ #define ts_show_ego2 true #define ts_show_egt false #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins false #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1708,7 +1711,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen121nissan.3742551637" +#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen121nissan.2148111864" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_hellen121vag.h b/firmware/controllers/generated/rusefi_generated_hellen121vag.h index e2113696ad..548c29bb07 100644 --- a/firmware/controllers/generated/rusefi_generated_hellen121vag.h +++ b/firmware/controllers/generated/rusefi_generated_hellen121vag.h @@ -1291,7 +1291,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 3404552908 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 2515927393 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1593,6 +1594,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider false +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1624,6 +1626,7 @@ #define ts_show_ego2 true #define ts_show_egt false #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins false #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1708,7 +1711,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen121vag.3404552908" +#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen121vag.2515927393" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_hellen128.h b/firmware/controllers/generated/rusefi_generated_hellen128.h index 166c956048..05e4136ea2 100644 --- a/firmware/controllers/generated/rusefi_generated_hellen128.h +++ b/firmware/controllers/generated/rusefi_generated_hellen128.h @@ -1291,7 +1291,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 2532377816 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 3387580277 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1593,6 +1594,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider false +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1624,6 +1626,7 @@ #define ts_show_ego2 true #define ts_show_egt false #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins false #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1708,7 +1711,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen128.2532377816" +#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen128.3387580277" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_hellen154hyundai.h b/firmware/controllers/generated/rusefi_generated_hellen154hyundai.h index 6355e57f7d..1086ea65cb 100644 --- a/firmware/controllers/generated/rusefi_generated_hellen154hyundai.h +++ b/firmware/controllers/generated/rusefi_generated_hellen154hyundai.h @@ -1291,7 +1291,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 537276888 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 2132634229 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1593,6 +1594,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider false +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 false #define ts_show_bank2_cam2 false @@ -1624,6 +1626,7 @@ #define ts_show_ego2 true #define ts_show_egt false #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins false #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1708,7 +1711,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen154hyundai.537276888" +#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen154hyundai.2132634229" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_hellen154hyundai_f7.h b/firmware/controllers/generated/rusefi_generated_hellen154hyundai_f7.h index 4ef9101945..c6fddecea7 100644 --- a/firmware/controllers/generated/rusefi_generated_hellen154hyundai_f7.h +++ b/firmware/controllers/generated/rusefi_generated_hellen154hyundai_f7.h @@ -1291,7 +1291,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 707126594 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 1967046383 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1593,6 +1594,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider false +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 false #define ts_show_bank2_cam2 false @@ -1624,6 +1626,7 @@ #define ts_show_ego2 true #define ts_show_egt false #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins false #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1708,7 +1711,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen154hyundai_f7.707126594" +#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen154hyundai_f7.1967046383" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_hellen72.h b/firmware/controllers/generated/rusefi_generated_hellen72.h index b638368862..c721483644 100644 --- a/firmware/controllers/generated/rusefi_generated_hellen72.h +++ b/firmware/controllers/generated/rusefi_generated_hellen72.h @@ -1291,7 +1291,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 4219656883 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 2761523486 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1593,6 +1594,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider false +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1624,6 +1626,7 @@ #define ts_show_ego2 true #define ts_show_egt false #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins false #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1708,7 +1711,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen72.4219656883" +#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen72.2761523486" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_hellen81.h b/firmware/controllers/generated/rusefi_generated_hellen81.h index 9ce8dcca9f..9520f16e42 100644 --- a/firmware/controllers/generated/rusefi_generated_hellen81.h +++ b/firmware/controllers/generated/rusefi_generated_hellen81.h @@ -1290,7 +1290,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 519290569 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 1105782116 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1592,6 +1593,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider false +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1623,6 +1625,7 @@ #define ts_show_ego2 true #define ts_show_egt false #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins false #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1707,7 +1710,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen81.519290569" +#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen81.1105782116" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_hellen88bmw.h b/firmware/controllers/generated/rusefi_generated_hellen88bmw.h index da9f46a24e..478bbba91c 100644 --- a/firmware/controllers/generated/rusefi_generated_hellen88bmw.h +++ b/firmware/controllers/generated/rusefi_generated_hellen88bmw.h @@ -1291,7 +1291,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 164670346 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 1456205863 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1593,6 +1594,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider false +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1624,6 +1626,7 @@ #define ts_show_ego2 true #define ts_show_egt false #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins false #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1708,7 +1711,7 @@ #define ts_show_vvt_output false #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen88bmw.164670346" +#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen88bmw.1456205863" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_hellenNA6.h b/firmware/controllers/generated/rusefi_generated_hellenNA6.h index eb3e14c047..3a82749449 100644 --- a/firmware/controllers/generated/rusefi_generated_hellenNA6.h +++ b/firmware/controllers/generated/rusefi_generated_hellenNA6.h @@ -1291,7 +1291,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 4022783439 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 2967311970 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1593,6 +1594,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider false +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1624,6 +1626,7 @@ #define ts_show_ego2 true #define ts_show_egt false #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins false #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1708,7 +1711,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.hellenNA6.4022783439" +#define TS_SIGNATURE "rusEFI master.2024.07.20.hellenNA6.2967311970" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_hellenNA8_96.h b/firmware/controllers/generated/rusefi_generated_hellenNA8_96.h index baf937a64f..a114c18d9f 100644 --- a/firmware/controllers/generated/rusefi_generated_hellenNA8_96.h +++ b/firmware/controllers/generated/rusefi_generated_hellenNA8_96.h @@ -1292,7 +1292,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 270307073 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 1325913260 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1594,6 +1595,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider false +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1625,6 +1627,7 @@ #define ts_show_ego2 true #define ts_show_egt false #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins false #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1709,7 +1712,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.hellenNA8_96.270307073" +#define TS_SIGNATURE "rusEFI master.2024.07.20.hellenNA8_96.1325913260" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_m74_9.h b/firmware/controllers/generated/rusefi_generated_m74_9.h index c17f4b231c..0cdba5752f 100644 --- a/firmware/controllers/generated/rusefi_generated_m74_9.h +++ b/firmware/controllers/generated/rusefi_generated_m74_9.h @@ -1290,7 +1290,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 3487110896 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 2428652893 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1592,6 +1593,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider false +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1624,6 +1626,7 @@ #define ts_show_ego2 true #define ts_show_egt false #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins false #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1708,7 +1711,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.m74_9.3487110896" +#define TS_SIGNATURE "rusEFI master.2024.07.20.m74_9.2428652893" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_mre-legacy_f4.h b/firmware/controllers/generated/rusefi_generated_mre-legacy_f4.h index ef3f04906d..27887e158d 100644 --- a/firmware/controllers/generated/rusefi_generated_mre-legacy_f4.h +++ b/firmware/controllers/generated/rusefi_generated_mre-legacy_f4.h @@ -1291,7 +1291,8 @@ #define show_microRusEFI_presets true #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 1715753824 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 962529485 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1593,6 +1594,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider false +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1624,6 +1626,7 @@ #define ts_show_ego2 true #define ts_show_egt true #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins false #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1708,7 +1711,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.mre-legacy_f4.1715753824" +#define TS_SIGNATURE "rusEFI master.2024.07.20.mre-legacy_f4.962529485" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_mre_f4.h b/firmware/controllers/generated/rusefi_generated_mre_f4.h index 63d7c59378..76c87c73ac 100644 --- a/firmware/controllers/generated/rusefi_generated_mre_f4.h +++ b/firmware/controllers/generated/rusefi_generated_mre_f4.h @@ -1291,7 +1291,8 @@ #define show_microRusEFI_presets true #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 1715753824 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 962529485 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1593,6 +1594,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider false +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1624,6 +1626,7 @@ #define ts_show_ego2 true #define ts_show_egt true #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins false #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1708,7 +1711,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.mre_f4.1715753824" +#define TS_SIGNATURE "rusEFI master.2024.07.20.mre_f4.962529485" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_mre_f7.h b/firmware/controllers/generated/rusefi_generated_mre_f7.h index 773a3c3c17..d05e2926fe 100644 --- a/firmware/controllers/generated/rusefi_generated_mre_f7.h +++ b/firmware/controllers/generated/rusefi_generated_mre_f7.h @@ -1291,7 +1291,8 @@ #define show_microRusEFI_presets true #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 1715753824 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 962529485 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1593,6 +1594,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider false +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1624,6 +1626,7 @@ #define ts_show_ego2 true #define ts_show_egt true #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins false #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1708,7 +1711,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.mre_f7.1715753824" +#define TS_SIGNATURE "rusEFI master.2024.07.20.mre_f7.962529485" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_nucleo_f413.h b/firmware/controllers/generated/rusefi_generated_nucleo_f413.h index 2a7200c4d5..209ad21490 100644 --- a/firmware/controllers/generated/rusefi_generated_nucleo_f413.h +++ b/firmware/controllers/generated/rusefi_generated_nucleo_f413.h @@ -1290,7 +1290,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 2070097455 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 611874178 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1592,6 +1593,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider true +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1623,6 +1625,7 @@ #define ts_show_ego2 true #define ts_show_egt true #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins true #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1707,7 +1710,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.nucleo_f413.2070097455" +#define TS_SIGNATURE "rusEFI master.2024.07.20.nucleo_f413.611874178" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_prometheus_405.h b/firmware/controllers/generated/rusefi_generated_prometheus_405.h index 859692f5dc..4312b85fc4 100644 --- a/firmware/controllers/generated/rusefi_generated_prometheus_405.h +++ b/firmware/controllers/generated/rusefi_generated_prometheus_405.h @@ -1290,7 +1290,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 1274536895 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 351057938 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1592,6 +1593,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider true +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1623,6 +1625,7 @@ #define ts_show_ego2 true #define ts_show_egt true #define ts_show_etb false +#define ts_show_etb_bias_curve true #define ts_show_etb_pins true #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1707,7 +1710,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.prometheus_405.1274536895" +#define TS_SIGNATURE "rusEFI master.2024.07.20.prometheus_405.351057938" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_prometheus_469.h b/firmware/controllers/generated/rusefi_generated_prometheus_469.h index 7cedcb8078..38926d6c4d 100644 --- a/firmware/controllers/generated/rusefi_generated_prometheus_469.h +++ b/firmware/controllers/generated/rusefi_generated_prometheus_469.h @@ -1290,7 +1290,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 1274536895 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 351057938 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1592,6 +1593,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider true +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1623,6 +1625,7 @@ #define ts_show_ego2 true #define ts_show_egt true #define ts_show_etb false +#define ts_show_etb_bias_curve true #define ts_show_etb_pins true #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1707,7 +1710,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.prometheus_469.1274536895" +#define TS_SIGNATURE "rusEFI master.2024.07.20.prometheus_469.351057938" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_proteus_f4.h b/firmware/controllers/generated/rusefi_generated_proteus_f4.h index 83e9e9e5cc..afc928ecd6 100644 --- a/firmware/controllers/generated/rusefi_generated_proteus_f4.h +++ b/firmware/controllers/generated/rusefi_generated_proteus_f4.h @@ -1290,7 +1290,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets true #define show_test_presets false -#define SIGNATURE_HASH 2440598541 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 3462647712 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1592,6 +1593,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider false +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1623,6 +1625,7 @@ #define ts_show_ego2 true #define ts_show_egt true #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins true #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1707,7 +1710,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.proteus_f4.2440598541" +#define TS_SIGNATURE "rusEFI master.2024.07.20.proteus_f4.3462647712" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_proteus_f7.h b/firmware/controllers/generated/rusefi_generated_proteus_f7.h index 3ab0897a8b..845d2e453e 100644 --- a/firmware/controllers/generated/rusefi_generated_proteus_f7.h +++ b/firmware/controllers/generated/rusefi_generated_proteus_f7.h @@ -1290,7 +1290,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets true #define show_test_presets false -#define SIGNATURE_HASH 2440598541 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 3462647712 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1592,6 +1593,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider false +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1623,6 +1625,7 @@ #define ts_show_ego2 true #define ts_show_egt true #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins true #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1707,7 +1710,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.proteus_f7.2440598541" +#define TS_SIGNATURE "rusEFI master.2024.07.20.proteus_f7.3462647712" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_proteus_h7.h b/firmware/controllers/generated/rusefi_generated_proteus_h7.h index 6c80417944..e3ba532549 100644 --- a/firmware/controllers/generated/rusefi_generated_proteus_h7.h +++ b/firmware/controllers/generated/rusefi_generated_proteus_h7.h @@ -1290,7 +1290,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets true #define show_test_presets false -#define SIGNATURE_HASH 2440598541 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 3462647712 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1592,6 +1593,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider false +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1623,6 +1625,7 @@ #define ts_show_ego2 true #define ts_show_egt true #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins true #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1707,7 +1710,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.proteus_h7.2440598541" +#define TS_SIGNATURE "rusEFI master.2024.07.20.proteus_h7.3462647712" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_s105.h b/firmware/controllers/generated/rusefi_generated_s105.h index 01984e5389..752963e1b1 100644 --- a/firmware/controllers/generated/rusefi_generated_s105.h +++ b/firmware/controllers/generated/rusefi_generated_s105.h @@ -1290,7 +1290,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 3303583469 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 2616456512 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1592,6 +1593,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider false +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1624,6 +1626,7 @@ #define ts_show_ego2 true #define ts_show_egt false #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins false #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1708,7 +1711,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.s105.3303583469" +#define TS_SIGNATURE "rusEFI master.2024.07.20.s105.2616456512" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_small-can-board.h b/firmware/controllers/generated/rusefi_generated_small-can-board.h index 10960ba4ea..d172a039d0 100644 --- a/firmware/controllers/generated/rusefi_generated_small-can-board.h +++ b/firmware/controllers/generated/rusefi_generated_small-can-board.h @@ -1291,7 +1291,8 @@ #define show_Proteus_presets false #define show_small_can_board_presets true #define show_test_presets false -#define SIGNATURE_HASH 3717073933 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 2190825376 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1593,6 +1594,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider false +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1625,6 +1627,7 @@ #define ts_show_egt false #define ts_show_engine_control false #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins false #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1709,7 +1712,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.small-can-board.3717073933" +#define TS_SIGNATURE "rusEFI master.2024.07.20.small-can-board.2190825376" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_stm32f429_nucleo.h b/firmware/controllers/generated/rusefi_generated_stm32f429_nucleo.h index abe4197133..9267b51f8f 100644 --- a/firmware/controllers/generated/rusefi_generated_stm32f429_nucleo.h +++ b/firmware/controllers/generated/rusefi_generated_stm32f429_nucleo.h @@ -1290,7 +1290,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 2070097455 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 611874178 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1592,6 +1593,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider true +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1623,6 +1625,7 @@ #define ts_show_ego2 true #define ts_show_egt true #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins true #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1707,7 +1710,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.stm32f429_nucleo.2070097455" +#define TS_SIGNATURE "rusEFI master.2024.07.20.stm32f429_nucleo.611874178" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_stm32f767_nucleo.h b/firmware/controllers/generated/rusefi_generated_stm32f767_nucleo.h index bace16a939..bbbfc7fa47 100644 --- a/firmware/controllers/generated/rusefi_generated_stm32f767_nucleo.h +++ b/firmware/controllers/generated/rusefi_generated_stm32f767_nucleo.h @@ -1290,7 +1290,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 2070097455 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 611874178 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1592,6 +1593,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider true +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1623,6 +1625,7 @@ #define ts_show_ego2 true #define ts_show_egt true #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins true #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1707,7 +1710,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.stm32f767_nucleo.2070097455" +#define TS_SIGNATURE "rusEFI master.2024.07.20.stm32f767_nucleo.611874178" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_stm32h743_nucleo.h b/firmware/controllers/generated/rusefi_generated_stm32h743_nucleo.h index ffab151f35..ea59835bbb 100644 --- a/firmware/controllers/generated/rusefi_generated_stm32h743_nucleo.h +++ b/firmware/controllers/generated/rusefi_generated_stm32h743_nucleo.h @@ -1290,7 +1290,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 2070097455 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 611874178 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1592,6 +1593,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider true +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1623,6 +1625,7 @@ #define ts_show_ego2 true #define ts_show_egt true #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins true #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1707,7 +1710,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.stm32h743_nucleo.2070097455" +#define TS_SIGNATURE "rusEFI master.2024.07.20.stm32h743_nucleo.611874178" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_subaru_eg33_f7.h b/firmware/controllers/generated/rusefi_generated_subaru_eg33_f7.h index b411741560..c702f09f99 100644 --- a/firmware/controllers/generated/rusefi_generated_subaru_eg33_f7.h +++ b/firmware/controllers/generated/rusefi_generated_subaru_eg33_f7.h @@ -1290,7 +1290,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 608310897 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 2069450204 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1592,6 +1593,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider false +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1623,6 +1625,7 @@ #define ts_show_ego2 true #define ts_show_egt false #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins true #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1708,7 +1711,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.subaru_eg33_f7.608310897" +#define TS_SIGNATURE "rusEFI master.2024.07.20.subaru_eg33_f7.2069450204" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_t-b-g.h b/firmware/controllers/generated/rusefi_generated_t-b-g.h index bba01c104b..3f95086b12 100644 --- a/firmware/controllers/generated/rusefi_generated_t-b-g.h +++ b/firmware/controllers/generated/rusefi_generated_t-b-g.h @@ -1290,7 +1290,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 2070097455 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 611874178 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1592,6 +1593,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider true +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1623,6 +1625,7 @@ #define ts_show_ego2 true #define ts_show_egt true #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins true #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1707,7 +1710,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.t-b-g.2070097455" +#define TS_SIGNATURE "rusEFI master.2024.07.20.t-b-g.611874178" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_tdg-pdm8.h b/firmware/controllers/generated/rusefi_generated_tdg-pdm8.h index cdc9620236..ec128268fd 100644 --- a/firmware/controllers/generated/rusefi_generated_tdg-pdm8.h +++ b/firmware/controllers/generated/rusefi_generated_tdg-pdm8.h @@ -1290,7 +1290,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 1095668391 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 508938506 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1592,6 +1593,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider true +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1623,6 +1625,7 @@ #define ts_show_ego2 true #define ts_show_egt true #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins true #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1707,7 +1710,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.tdg-pdm8.1095668391" +#define TS_SIGNATURE "rusEFI master.2024.07.20.tdg-pdm8.508938506" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_uaefi.h b/firmware/controllers/generated/rusefi_generated_uaefi.h index 7ca63bc323..8255171acf 100644 --- a/firmware/controllers/generated/rusefi_generated_uaefi.h +++ b/firmware/controllers/generated/rusefi_generated_uaefi.h @@ -1291,7 +1291,8 @@ #define show_Proteus_presets false #define show_test_presets false #define show_uaefi_presets true -#define SIGNATURE_HASH 1040430001 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 1629022236 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1593,6 +1594,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider false +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1624,6 +1626,7 @@ #define ts_show_ego2 true #define ts_show_egt false #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins true #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1708,7 +1711,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.uaefi.1040430001" +#define TS_SIGNATURE "rusEFI master.2024.07.20.uaefi.1629022236" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/rusefi_generated_uaefi121.h b/firmware/controllers/generated/rusefi_generated_uaefi121.h index 62133c993c..0328877aae 100644 --- a/firmware/controllers/generated/rusefi_generated_uaefi121.h +++ b/firmware/controllers/generated/rusefi_generated_uaefi121.h @@ -1290,7 +1290,8 @@ #define show_microRusEFI_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH 697599773 +#define show_vvt_output_pin true +#define SIGNATURE_HASH 1989139632 #define SIMULATOR_TUNE_BIN_FILE_NAME "generated/simulator_tune_image.bin" #define SIMULATOR_TUNE_BIN_FILE_NAME_PREFIX "generated/simulator_tune_image" #define SIMULATOR_TUNE_BIN_FILE_NAME_SUFFIX ".bin" @@ -1592,6 +1593,7 @@ #define ts_show_air_conditioning true #define ts_show_alternator true #define ts_show_analog_divider false +#define ts_show_aux_sensors true #define ts_show_auxserial_pins true #define ts_show_bank2_cam1 true #define ts_show_bank2_cam2 true @@ -1623,6 +1625,7 @@ #define ts_show_ego2 true #define ts_show_egt false #define ts_show_etb true +#define ts_show_etb_bias_curve true #define ts_show_etb_pins true #define ts_show_exhaust_vvt true #define ts_show_experimental true @@ -1707,7 +1710,7 @@ #define ts_show_vvt_output true #define ts_show_wbo_canbus_index true #define ts_show_wbo_canbus_set_index true -#define TS_SIGNATURE "rusEFI master.2024.07.20.uaefi121.697599773" +#define TS_SIGNATURE "rusEFI master.2024.07.20.uaefi121.1989139632" #define TS_SIMULATE_CAN '>' #define TS_SIMULATE_CAN_char > #define TS_SINGLE_WRITE_COMMAND 'W' diff --git a/firmware/controllers/generated/signature_alphax-2chan.h b/firmware/controllers/generated/signature_alphax-2chan.h index d344e3bf61..e6b13f5f14 100644 --- a/firmware/controllers/generated/signature_alphax-2chan.h +++ b/firmware/controllers/generated/signature_alphax-2chan.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 179035400 -#define TS_SIGNATURE "rusEFI master.2024.07.20.alphax-2chan.179035400" +#define SIGNATURE_HASH 1437632165 +#define TS_SIGNATURE "rusEFI master.2024.07.20.alphax-2chan.1437632165" diff --git a/firmware/controllers/generated/signature_alphax-4chan.h b/firmware/controllers/generated/signature_alphax-4chan.h index 5401d5e227..faf2af11c1 100644 --- a/firmware/controllers/generated/signature_alphax-4chan.h +++ b/firmware/controllers/generated/signature_alphax-4chan.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3664394221 -#define TS_SIGNATURE "rusEFI master.2024.07.20.alphax-4chan.3664394221" +#define SIGNATURE_HASH 2238803008 +#define TS_SIGNATURE "rusEFI master.2024.07.20.alphax-4chan.2238803008" diff --git a/firmware/controllers/generated/signature_alphax-4chan_f7.h b/firmware/controllers/generated/signature_alphax-4chan_f7.h index f873feb69a..02eacbb510 100644 --- a/firmware/controllers/generated/signature_alphax-4chan_f7.h +++ b/firmware/controllers/generated/signature_alphax-4chan_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3664394221 -#define TS_SIGNATURE "rusEFI master.2024.07.20.alphax-4chan_f7.3664394221" +#define SIGNATURE_HASH 2238803008 +#define TS_SIGNATURE "rusEFI master.2024.07.20.alphax-4chan_f7.2238803008" diff --git a/firmware/controllers/generated/signature_alphax-8chan-revA.h b/firmware/controllers/generated/signature_alphax-8chan-revA.h index e1b1002494..9edb3bab03 100644 --- a/firmware/controllers/generated/signature_alphax-8chan-revA.h +++ b/firmware/controllers/generated/signature_alphax-8chan-revA.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3630593746 -#define TS_SIGNATURE "rusEFI master.2024.07.20.alphax-8chan-revA.3630593746" +#define SIGNATURE_HASH 2273127807 +#define TS_SIGNATURE "rusEFI master.2024.07.20.alphax-8chan-revA.2273127807" diff --git a/firmware/controllers/generated/signature_alphax-8chan.h b/firmware/controllers/generated/signature_alphax-8chan.h index ebdbd07b61..f787d84527 100644 --- a/firmware/controllers/generated/signature_alphax-8chan.h +++ b/firmware/controllers/generated/signature_alphax-8chan.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3654662667 -#define TS_SIGNATURE "rusEFI master.2024.07.20.alphax-8chan.3654662667" +#define SIGNATURE_HASH 2261705126 +#define TS_SIGNATURE "rusEFI master.2024.07.20.alphax-8chan.2261705126" diff --git a/firmware/controllers/generated/signature_alphax-8chan_f7.h b/firmware/controllers/generated/signature_alphax-8chan_f7.h index d153f2a5c7..091c7f6398 100644 --- a/firmware/controllers/generated/signature_alphax-8chan_f7.h +++ b/firmware/controllers/generated/signature_alphax-8chan_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3654662667 -#define TS_SIGNATURE "rusEFI master.2024.07.20.alphax-8chan_f7.3654662667" +#define SIGNATURE_HASH 2261705126 +#define TS_SIGNATURE "rusEFI master.2024.07.20.alphax-8chan_f7.2261705126" diff --git a/firmware/controllers/generated/signature_alphax-silver.h b/firmware/controllers/generated/signature_alphax-silver.h index d11bf699ce..54996967ed 100644 --- a/firmware/controllers/generated/signature_alphax-silver.h +++ b/firmware/controllers/generated/signature_alphax-silver.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1188898185 -#define TS_SIGNATURE "rusEFI master.2024.07.20.alphax-silver.1188898185" +#define SIGNATURE_HASH 432438820 +#define TS_SIGNATURE "rusEFI master.2024.07.20.alphax-silver.432438820" diff --git a/firmware/controllers/generated/signature_at_start_f435.h b/firmware/controllers/generated/signature_at_start_f435.h index 34d28ff1f4..66ee5e3444 100644 --- a/firmware/controllers/generated/signature_at_start_f435.h +++ b/firmware/controllers/generated/signature_at_start_f435.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2070097455 -#define TS_SIGNATURE "rusEFI master.2024.07.20.at_start_f435.2070097455" +#define SIGNATURE_HASH 611874178 +#define TS_SIGNATURE "rusEFI master.2024.07.20.at_start_f435.611874178" diff --git a/firmware/controllers/generated/signature_atlas.h b/firmware/controllers/generated/signature_atlas.h index fdb9772fbd..ee5295a7b4 100644 --- a/firmware/controllers/generated/signature_atlas.h +++ b/firmware/controllers/generated/signature_atlas.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1063582305 -#define TS_SIGNATURE "rusEFI master.2024.07.20.atlas.1063582305" +#define SIGNATURE_HASH 1618977228 +#define TS_SIGNATURE "rusEFI master.2024.07.20.atlas.1618977228" diff --git a/firmware/controllers/generated/signature_f407-discovery.h b/firmware/controllers/generated/signature_f407-discovery.h index 18b184a011..05aa431f7e 100644 --- a/firmware/controllers/generated/signature_f407-discovery.h +++ b/firmware/controllers/generated/signature_f407-discovery.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3744650574 -#define TS_SIGNATURE "rusEFI master.2024.07.20.f407-discovery.3744650574" +#define SIGNATURE_HASH 2150207203 +#define TS_SIGNATURE "rusEFI master.2024.07.20.f407-discovery.2150207203" diff --git a/firmware/controllers/generated/signature_f429-discovery.h b/firmware/controllers/generated/signature_f429-discovery.h index 92bf7bc3ba..a085ae2705 100644 --- a/firmware/controllers/generated/signature_f429-discovery.h +++ b/firmware/controllers/generated/signature_f429-discovery.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2070097455 -#define TS_SIGNATURE "rusEFI master.2024.07.20.f429-discovery.2070097455" +#define SIGNATURE_HASH 611874178 +#define TS_SIGNATURE "rusEFI master.2024.07.20.f429-discovery.611874178" diff --git a/firmware/controllers/generated/signature_f469-discovery.h b/firmware/controllers/generated/signature_f469-discovery.h index 3b89e99955..0d8ec741b4 100644 --- a/firmware/controllers/generated/signature_f469-discovery.h +++ b/firmware/controllers/generated/signature_f469-discovery.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1236543676 -#define TS_SIGNATURE "rusEFI master.2024.07.20.f469-discovery.1236543676" +#define SIGNATURE_HASH 380597009 +#define TS_SIGNATURE "rusEFI master.2024.07.20.f469-discovery.380597009" diff --git a/firmware/controllers/generated/signature_frankenso_na6.h b/firmware/controllers/generated/signature_frankenso_na6.h index 46e4b6aa5e..720d9afcb4 100644 --- a/firmware/controllers/generated/signature_frankenso_na6.h +++ b/firmware/controllers/generated/signature_frankenso_na6.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 769677876 -#define TS_SIGNATURE "rusEFI master.2024.07.20.frankenso_na6.769677876" +#define SIGNATURE_HASH 1929052569 +#define TS_SIGNATURE "rusEFI master.2024.07.20.frankenso_na6.1929052569" diff --git a/firmware/controllers/generated/signature_haba208.h b/firmware/controllers/generated/signature_haba208.h index fcfa8cdba7..146992d904 100644 --- a/firmware/controllers/generated/signature_haba208.h +++ b/firmware/controllers/generated/signature_haba208.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2070097455 -#define TS_SIGNATURE "rusEFI master.2024.07.20.haba208.2070097455" +#define SIGNATURE_HASH 611874178 +#define TS_SIGNATURE "rusEFI master.2024.07.20.haba208.611874178" diff --git a/firmware/controllers/generated/signature_hellen-112-17.h b/firmware/controllers/generated/signature_hellen-112-17.h index ba9a0483b3..d54474f9e4 100644 --- a/firmware/controllers/generated/signature_hellen-112-17.h +++ b/firmware/controllers/generated/signature_hellen-112-17.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 4067145387 -#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen-112-17.4067145387" +#define SIGNATURE_HASH 2909859078 +#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen-112-17.2909859078" diff --git a/firmware/controllers/generated/signature_hellen-gm-e67.h b/firmware/controllers/generated/signature_hellen-gm-e67.h index 56e1bb293d..63f1f2a9ee 100644 --- a/firmware/controllers/generated/signature_hellen-gm-e67.h +++ b/firmware/controllers/generated/signature_hellen-gm-e67.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3071953303 -#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen-gm-e67.3071953303" +#define SIGNATURE_HASH 3892384314 +#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen-gm-e67.3892384314" diff --git a/firmware/controllers/generated/signature_hellen-honda-k.h b/firmware/controllers/generated/signature_hellen-honda-k.h index 60896e75bc..1c1246fdfc 100644 --- a/firmware/controllers/generated/signature_hellen-honda-k.h +++ b/firmware/controllers/generated/signature_hellen-honda-k.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2046998629 -#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen-honda-k.2046998629" +#define SIGNATURE_HASH 622453704 +#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen-honda-k.622453704" diff --git a/firmware/controllers/generated/signature_hellen-nb1.h b/firmware/controllers/generated/signature_hellen-nb1.h index df607f56b6..1df5e32c2e 100644 --- a/firmware/controllers/generated/signature_hellen-nb1.h +++ b/firmware/controllers/generated/signature_hellen-nb1.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2457589775 -#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen-nb1.2457589775" +#define SIGNATURE_HASH 3445654434 +#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen-nb1.3445654434" diff --git a/firmware/controllers/generated/signature_hellen121nissan.h b/firmware/controllers/generated/signature_hellen121nissan.h index 917ef38eb6..3805010696 100644 --- a/firmware/controllers/generated/signature_hellen121nissan.h +++ b/firmware/controllers/generated/signature_hellen121nissan.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3742551637 -#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen121nissan.3742551637" +#define SIGNATURE_HASH 2148111864 +#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen121nissan.2148111864" diff --git a/firmware/controllers/generated/signature_hellen121vag.h b/firmware/controllers/generated/signature_hellen121vag.h index e55480b3d1..2f77f59ed4 100644 --- a/firmware/controllers/generated/signature_hellen121vag.h +++ b/firmware/controllers/generated/signature_hellen121vag.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3404552908 -#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen121vag.3404552908" +#define SIGNATURE_HASH 2515927393 +#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen121vag.2515927393" diff --git a/firmware/controllers/generated/signature_hellen128.h b/firmware/controllers/generated/signature_hellen128.h index 6e47b883dc..df89b90be0 100644 --- a/firmware/controllers/generated/signature_hellen128.h +++ b/firmware/controllers/generated/signature_hellen128.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2532377816 -#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen128.2532377816" +#define SIGNATURE_HASH 3387580277 +#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen128.3387580277" diff --git a/firmware/controllers/generated/signature_hellen154hyundai.h b/firmware/controllers/generated/signature_hellen154hyundai.h index 62efb1166a..92641fa4bc 100644 --- a/firmware/controllers/generated/signature_hellen154hyundai.h +++ b/firmware/controllers/generated/signature_hellen154hyundai.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 537276888 -#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen154hyundai.537276888" +#define SIGNATURE_HASH 2132634229 +#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen154hyundai.2132634229" diff --git a/firmware/controllers/generated/signature_hellen154hyundai_f7.h b/firmware/controllers/generated/signature_hellen154hyundai_f7.h index 5b05c5cac4..cbc5072b1d 100644 --- a/firmware/controllers/generated/signature_hellen154hyundai_f7.h +++ b/firmware/controllers/generated/signature_hellen154hyundai_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 707126594 -#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen154hyundai_f7.707126594" +#define SIGNATURE_HASH 1967046383 +#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen154hyundai_f7.1967046383" diff --git a/firmware/controllers/generated/signature_hellen72.h b/firmware/controllers/generated/signature_hellen72.h index 450344f854..7b907ac25b 100644 --- a/firmware/controllers/generated/signature_hellen72.h +++ b/firmware/controllers/generated/signature_hellen72.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 4219656883 -#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen72.4219656883" +#define SIGNATURE_HASH 2761523486 +#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen72.2761523486" diff --git a/firmware/controllers/generated/signature_hellen81.h b/firmware/controllers/generated/signature_hellen81.h index 0ac110a506..631b56894a 100644 --- a/firmware/controllers/generated/signature_hellen81.h +++ b/firmware/controllers/generated/signature_hellen81.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 519290569 -#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen81.519290569" +#define SIGNATURE_HASH 1105782116 +#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen81.1105782116" diff --git a/firmware/controllers/generated/signature_hellen88bmw.h b/firmware/controllers/generated/signature_hellen88bmw.h index 81cf81ddc5..f20cc2a845 100644 --- a/firmware/controllers/generated/signature_hellen88bmw.h +++ b/firmware/controllers/generated/signature_hellen88bmw.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 164670346 -#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen88bmw.164670346" +#define SIGNATURE_HASH 1456205863 +#define TS_SIGNATURE "rusEFI master.2024.07.20.hellen88bmw.1456205863" diff --git a/firmware/controllers/generated/signature_hellenNA6.h b/firmware/controllers/generated/signature_hellenNA6.h index f06b193f77..e89400ce67 100644 --- a/firmware/controllers/generated/signature_hellenNA6.h +++ b/firmware/controllers/generated/signature_hellenNA6.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 4022783439 -#define TS_SIGNATURE "rusEFI master.2024.07.20.hellenNA6.4022783439" +#define SIGNATURE_HASH 2967311970 +#define TS_SIGNATURE "rusEFI master.2024.07.20.hellenNA6.2967311970" diff --git a/firmware/controllers/generated/signature_hellenNA8_96.h b/firmware/controllers/generated/signature_hellenNA8_96.h index 6ce0b58a7c..b5e386aec9 100644 --- a/firmware/controllers/generated/signature_hellenNA8_96.h +++ b/firmware/controllers/generated/signature_hellenNA8_96.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 270307073 -#define TS_SIGNATURE "rusEFI master.2024.07.20.hellenNA8_96.270307073" +#define SIGNATURE_HASH 1325913260 +#define TS_SIGNATURE "rusEFI master.2024.07.20.hellenNA8_96.1325913260" diff --git a/firmware/controllers/generated/signature_m74_9.h b/firmware/controllers/generated/signature_m74_9.h index 9d8d2f0f02..3edfe40373 100644 --- a/firmware/controllers/generated/signature_m74_9.h +++ b/firmware/controllers/generated/signature_m74_9.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3487110896 -#define TS_SIGNATURE "rusEFI master.2024.07.20.m74_9.3487110896" +#define SIGNATURE_HASH 2428652893 +#define TS_SIGNATURE "rusEFI master.2024.07.20.m74_9.2428652893" diff --git a/firmware/controllers/generated/signature_mre-legacy_f4.h b/firmware/controllers/generated/signature_mre-legacy_f4.h index 6a56250f82..aeb9b5d3cf 100644 --- a/firmware/controllers/generated/signature_mre-legacy_f4.h +++ b/firmware/controllers/generated/signature_mre-legacy_f4.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1715753824 -#define TS_SIGNATURE "rusEFI master.2024.07.20.mre-legacy_f4.1715753824" +#define SIGNATURE_HASH 962529485 +#define TS_SIGNATURE "rusEFI master.2024.07.20.mre-legacy_f4.962529485" diff --git a/firmware/controllers/generated/signature_mre_f4.h b/firmware/controllers/generated/signature_mre_f4.h index 22fc295b72..9c59fdd71d 100644 --- a/firmware/controllers/generated/signature_mre_f4.h +++ b/firmware/controllers/generated/signature_mre_f4.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1715753824 -#define TS_SIGNATURE "rusEFI master.2024.07.20.mre_f4.1715753824" +#define SIGNATURE_HASH 962529485 +#define TS_SIGNATURE "rusEFI master.2024.07.20.mre_f4.962529485" diff --git a/firmware/controllers/generated/signature_mre_f7.h b/firmware/controllers/generated/signature_mre_f7.h index 42731b5866..56b7bfb609 100644 --- a/firmware/controllers/generated/signature_mre_f7.h +++ b/firmware/controllers/generated/signature_mre_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1715753824 -#define TS_SIGNATURE "rusEFI master.2024.07.20.mre_f7.1715753824" +#define SIGNATURE_HASH 962529485 +#define TS_SIGNATURE "rusEFI master.2024.07.20.mre_f7.962529485" diff --git a/firmware/controllers/generated/signature_nucleo_f413.h b/firmware/controllers/generated/signature_nucleo_f413.h index 2242e574a8..d0a2f42532 100644 --- a/firmware/controllers/generated/signature_nucleo_f413.h +++ b/firmware/controllers/generated/signature_nucleo_f413.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2070097455 -#define TS_SIGNATURE "rusEFI master.2024.07.20.nucleo_f413.2070097455" +#define SIGNATURE_HASH 611874178 +#define TS_SIGNATURE "rusEFI master.2024.07.20.nucleo_f413.611874178" diff --git a/firmware/controllers/generated/signature_prometheus_405.h b/firmware/controllers/generated/signature_prometheus_405.h index a150436da1..7c3d50e6c1 100644 --- a/firmware/controllers/generated/signature_prometheus_405.h +++ b/firmware/controllers/generated/signature_prometheus_405.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1274536895 -#define TS_SIGNATURE "rusEFI master.2024.07.20.prometheus_405.1274536895" +#define SIGNATURE_HASH 351057938 +#define TS_SIGNATURE "rusEFI master.2024.07.20.prometheus_405.351057938" diff --git a/firmware/controllers/generated/signature_prometheus_469.h b/firmware/controllers/generated/signature_prometheus_469.h index 341b67a4cb..36062bfe6e 100644 --- a/firmware/controllers/generated/signature_prometheus_469.h +++ b/firmware/controllers/generated/signature_prometheus_469.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1274536895 -#define TS_SIGNATURE "rusEFI master.2024.07.20.prometheus_469.1274536895" +#define SIGNATURE_HASH 351057938 +#define TS_SIGNATURE "rusEFI master.2024.07.20.prometheus_469.351057938" diff --git a/firmware/controllers/generated/signature_proteus_f4.h b/firmware/controllers/generated/signature_proteus_f4.h index 8f24d544e5..ef8517b60c 100644 --- a/firmware/controllers/generated/signature_proteus_f4.h +++ b/firmware/controllers/generated/signature_proteus_f4.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2440598541 -#define TS_SIGNATURE "rusEFI master.2024.07.20.proteus_f4.2440598541" +#define SIGNATURE_HASH 3462647712 +#define TS_SIGNATURE "rusEFI master.2024.07.20.proteus_f4.3462647712" diff --git a/firmware/controllers/generated/signature_proteus_f7.h b/firmware/controllers/generated/signature_proteus_f7.h index 7329220e6c..b50478ef04 100644 --- a/firmware/controllers/generated/signature_proteus_f7.h +++ b/firmware/controllers/generated/signature_proteus_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2440598541 -#define TS_SIGNATURE "rusEFI master.2024.07.20.proteus_f7.2440598541" +#define SIGNATURE_HASH 3462647712 +#define TS_SIGNATURE "rusEFI master.2024.07.20.proteus_f7.3462647712" diff --git a/firmware/controllers/generated/signature_proteus_h7.h b/firmware/controllers/generated/signature_proteus_h7.h index 47c207ab8a..2b4ffe81ff 100644 --- a/firmware/controllers/generated/signature_proteus_h7.h +++ b/firmware/controllers/generated/signature_proteus_h7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2440598541 -#define TS_SIGNATURE "rusEFI master.2024.07.20.proteus_h7.2440598541" +#define SIGNATURE_HASH 3462647712 +#define TS_SIGNATURE "rusEFI master.2024.07.20.proteus_h7.3462647712" diff --git a/firmware/controllers/generated/signature_s105.h b/firmware/controllers/generated/signature_s105.h index 8ad9aefb94..8168ed6651 100644 --- a/firmware/controllers/generated/signature_s105.h +++ b/firmware/controllers/generated/signature_s105.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3303583469 -#define TS_SIGNATURE "rusEFI master.2024.07.20.s105.3303583469" +#define SIGNATURE_HASH 2616456512 +#define TS_SIGNATURE "rusEFI master.2024.07.20.s105.2616456512" diff --git a/firmware/controllers/generated/signature_small-can-board.h b/firmware/controllers/generated/signature_small-can-board.h index 478ad28d64..9b5f8e38ea 100644 --- a/firmware/controllers/generated/signature_small-can-board.h +++ b/firmware/controllers/generated/signature_small-can-board.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 3717073933 -#define TS_SIGNATURE "rusEFI master.2024.07.20.small-can-board.3717073933" +#define SIGNATURE_HASH 2190825376 +#define TS_SIGNATURE "rusEFI master.2024.07.20.small-can-board.2190825376" diff --git a/firmware/controllers/generated/signature_stm32f429_nucleo.h b/firmware/controllers/generated/signature_stm32f429_nucleo.h index 1fcd12ac74..b5cf3329ab 100644 --- a/firmware/controllers/generated/signature_stm32f429_nucleo.h +++ b/firmware/controllers/generated/signature_stm32f429_nucleo.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2070097455 -#define TS_SIGNATURE "rusEFI master.2024.07.20.stm32f429_nucleo.2070097455" +#define SIGNATURE_HASH 611874178 +#define TS_SIGNATURE "rusEFI master.2024.07.20.stm32f429_nucleo.611874178" diff --git a/firmware/controllers/generated/signature_stm32f767_nucleo.h b/firmware/controllers/generated/signature_stm32f767_nucleo.h index 89f67d0364..871d8b10c4 100644 --- a/firmware/controllers/generated/signature_stm32f767_nucleo.h +++ b/firmware/controllers/generated/signature_stm32f767_nucleo.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2070097455 -#define TS_SIGNATURE "rusEFI master.2024.07.20.stm32f767_nucleo.2070097455" +#define SIGNATURE_HASH 611874178 +#define TS_SIGNATURE "rusEFI master.2024.07.20.stm32f767_nucleo.611874178" diff --git a/firmware/controllers/generated/signature_stm32h743_nucleo.h b/firmware/controllers/generated/signature_stm32h743_nucleo.h index 39f3e7ad94..10183a893c 100644 --- a/firmware/controllers/generated/signature_stm32h743_nucleo.h +++ b/firmware/controllers/generated/signature_stm32h743_nucleo.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2070097455 -#define TS_SIGNATURE "rusEFI master.2024.07.20.stm32h743_nucleo.2070097455" +#define SIGNATURE_HASH 611874178 +#define TS_SIGNATURE "rusEFI master.2024.07.20.stm32h743_nucleo.611874178" diff --git a/firmware/controllers/generated/signature_subaru_eg33_f7.h b/firmware/controllers/generated/signature_subaru_eg33_f7.h index 09bb938468..1636f885b2 100644 --- a/firmware/controllers/generated/signature_subaru_eg33_f7.h +++ b/firmware/controllers/generated/signature_subaru_eg33_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 608310897 -#define TS_SIGNATURE "rusEFI master.2024.07.20.subaru_eg33_f7.608310897" +#define SIGNATURE_HASH 2069450204 +#define TS_SIGNATURE "rusEFI master.2024.07.20.subaru_eg33_f7.2069450204" diff --git a/firmware/controllers/generated/signature_t-b-g.h b/firmware/controllers/generated/signature_t-b-g.h index e47f6ca972..e339daa0cd 100644 --- a/firmware/controllers/generated/signature_t-b-g.h +++ b/firmware/controllers/generated/signature_t-b-g.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 2070097455 -#define TS_SIGNATURE "rusEFI master.2024.07.20.t-b-g.2070097455" +#define SIGNATURE_HASH 611874178 +#define TS_SIGNATURE "rusEFI master.2024.07.20.t-b-g.611874178" diff --git a/firmware/controllers/generated/signature_tdg-pdm8.h b/firmware/controllers/generated/signature_tdg-pdm8.h index 730d68dd98..f2486f3658 100644 --- a/firmware/controllers/generated/signature_tdg-pdm8.h +++ b/firmware/controllers/generated/signature_tdg-pdm8.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1095668391 -#define TS_SIGNATURE "rusEFI master.2024.07.20.tdg-pdm8.1095668391" +#define SIGNATURE_HASH 508938506 +#define TS_SIGNATURE "rusEFI master.2024.07.20.tdg-pdm8.508938506" diff --git a/firmware/controllers/generated/signature_uaefi.h b/firmware/controllers/generated/signature_uaefi.h index 07757796cc..12538cb3e6 100644 --- a/firmware/controllers/generated/signature_uaefi.h +++ b/firmware/controllers/generated/signature_uaefi.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 1040430001 -#define TS_SIGNATURE "rusEFI master.2024.07.20.uaefi.1040430001" +#define SIGNATURE_HASH 1629022236 +#define TS_SIGNATURE "rusEFI master.2024.07.20.uaefi.1629022236" diff --git a/firmware/controllers/generated/signature_uaefi121.h b/firmware/controllers/generated/signature_uaefi121.h index e1d0f38ff0..49c89607c6 100644 --- a/firmware/controllers/generated/signature_uaefi121.h +++ b/firmware/controllers/generated/signature_uaefi121.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool config_definition-all.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH 697599773 -#define TS_SIGNATURE "rusEFI master.2024.07.20.uaefi121.697599773" +#define SIGNATURE_HASH 1989139632 +#define TS_SIGNATURE "rusEFI master.2024.07.20.uaefi121.1989139632" diff --git a/firmware/tunerstudio/generated/rusefi.ini b/firmware/tunerstudio/generated/rusefi.ini index ae9bf09b6f..55a94d2613 100644 --- a/firmware/tunerstudio/generated/rusefi.ini +++ b/firmware/tunerstudio/generated/rusefi.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.f407-discovery.3744650574" + signature = "rusEFI master.2024.07.20.f407-discovery.2150207203" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.f407-discovery.3744650574" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.f407-discovery.2150207203" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:08:38 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:09:57 UTC 2024 pageSize = 22800 page = 1 @@ -6150,8 +6150,8 @@ menuDialog = main subMenu = egtInputs, "EGT" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8670,11 +8670,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini b/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini index d38278eb66..a8e6bb41bc 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.alphax-2chan.179035400" + signature = "rusEFI master.2024.07.20.alphax-2chan.1437632165" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.alphax-2chan.179035400" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.alphax-2chan.1437632165" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","B4 - O2","On-board MAP","INVALID","B5 - TPS","A2 Battery Sense","C7 - CAM Hall/Digital","INVALID","X1 - AIN1","INVALID","INVALID","B2 - MAP","B7 - CLT","B3 - IAT","X3 - AIN2","X7 - AIN4" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:07:59 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:09:19 UTC 2024 pageSize = 22804 page = 1 @@ -6055,6 +6055,8 @@ menuDialog = main subMenu = gppwm3, "General Purpose PWM 3" subMenu = gppwm4, "General Purpose PWM 4" + subMenu = etbTpsBiasCurve, "ETB bias curve (feed forward)" + subMenu = throttle2TrimTbl, "ETB #2 Trim", { tps2_1AdcChannel != 0 } subMenu = std_separator subMenu = vvtPidDialog, "VVT outputs and PID", { vvtMode1 != 0 } @@ -6128,8 +6130,8 @@ menuDialog = main subMenu = compressorDischargeTemperature, "Compressor discharge temp" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -7238,12 +7240,6 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Cylinder 4", cylinderBankSelect4, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 3} field = "Cylinder 5 ", cylinderBankSelect5, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 4} field = "Cylinder 6 ", cylinderBankSelect6, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 5} - field = "Cylinder 7 ", cylinderBankSelect7, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 6} - field = "Cylinder 8 ", cylinderBankSelect8, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 7} - field = "Cylinder 9 ", cylinderBankSelect9, {isInjectionEnabled == 1 && cylindersCount > 8} - field = "Cylinder 10 ", cylinderBankSelect10, {isInjectionEnabled == 1 && cylindersCount > 9} - field = "Cylinder 11 ", cylinderBankSelect11, {isInjectionEnabled == 1 && cylindersCount > 10} - field = "Cylinder 12 ", cylinderBankSelect12, {isInjectionEnabled == 1 && cylindersCount > 11} dialog = injectorNonlinearPolynomial, "Polynomial Adder", yAxis field = "Add nonlinearity below pulse", applyNonlinearBelowPulse @@ -7331,12 +7327,6 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Offset cyl 4", timing_offset_cylinder4, {cylindersCount > 3} field = "Offset cyl 5", timing_offset_cylinder5, {cylindersCount > 4} field = "Offset cyl 6", timing_offset_cylinder6, {cylindersCount > 5} - field = "Offset cyl 7", timing_offset_cylinder7, {cylindersCount > 6} - field = "Offset cyl 8", timing_offset_cylinder8, {cylindersCount > 7} - field = "Offset cyl 9", timing_offset_cylinder9, {cylindersCount > 8} - field = "Offset cyl 10", timing_offset_cylinder10, {cylindersCount > 9} - field = "Offset cyl 11", timing_offset_cylinder11, {cylindersCount > 10} - field = "Offset cyl 12", timing_offset_cylinder12, {cylindersCount > 11} dialog = stagedInjectionOutputs, "", yAxis field = "Injection Stage 2 Output 1", injectionPinsStage21, {isInjectionEnabled && enableStagedInjection} @@ -8588,11 +8578,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini b/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini index 418092bf10..c5f7bda6da 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.alphax-4chan.3664394221" + signature = "rusEFI master.2024.07.20.alphax-4chan.2238803008" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.alphax-4chan.3664394221" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.alphax-4chan.2238803008" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","B4 - O2","On-board MAP","D5 - PPS","B5 - TPS","F7 - Ignition Key Voltage","C7 - CAM Hall/Digital","X7 - AIN4","D4 - TPS2","INVALID","X5 - AIN3","B2 - MAP","B7 - CLT","B3 - IAT","F6 - PPS2","INVALID","INVALID","INVALID","INVALID","X3 - AIN2","X1 - AIN1 and D5 on older boards" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:08:28 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:09:48 UTC 2024 pageSize = 22804 page = 1 @@ -6170,8 +6170,8 @@ menuDialog = main subMenu = compressorDischargeTemperature, "Compressor discharge temp" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8657,11 +8657,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_alphax-4chan_f7.ini b/firmware/tunerstudio/generated/rusefi_alphax-4chan_f7.ini index 59a3d2cdb3..034c82d36d 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-4chan_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-4chan_f7.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.alphax-4chan_f7.3664394221" + signature = "rusEFI master.2024.07.20.alphax-4chan_f7.2238803008" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.alphax-4chan_f7.3664394221" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.alphax-4chan_f7.2238803008" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","B4 - O2","On-board MAP","D5 - PPS","B5 - TPS","F7 - Ignition Key Voltage","C7 - CAM Hall/Digital","X7 - AIN4","D4 - TPS2","INVALID","X5 - AIN3","B2 - MAP","B7 - CLT","B3 - IAT","F6 - PPS2","INVALID","INVALID","INVALID","INVALID","X3 - AIN2","X1 - AIN1 and D5 on older boards" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:08:27 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:09:46 UTC 2024 pageSize = 22804 page = 1 @@ -6170,8 +6170,8 @@ menuDialog = main subMenu = compressorDischargeTemperature, "Compressor discharge temp" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8657,11 +8657,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_alphax-8chan-revA.ini b/firmware/tunerstudio/generated/rusefi_alphax-8chan-revA.ini index 117e39e53d..633541e58e 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-8chan-revA.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-8chan-revA.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.alphax-8chan-revA.3630593746" + signature = "rusEFI master.2024.07.20.alphax-8chan-revA.2273127807" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.alphax-8chan-revA.3630593746" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.alphax-8chan-revA.2273127807" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","INVALID","INVALID","17A - PPS","23C - TPS","Battery Sense","INVALID","15D - AN5","24C - TPS2","14A - Analog 1","22A - Analog 22","On-board MAP","16A - CLT","15A - IAT","31C - PPS2","33A - AN3","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","16D - AN6","INVALID","INVALID","INVALID","INVALID","7C - AT4","INVALID","6C - AT3","14D - AN4" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:08:01 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:09:20 UTC 2024 pageSize = 22804 page = 1 @@ -6152,8 +6152,8 @@ menuDialog = main subMenu = compressorDischargeTemperature, "Compressor discharge temp" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8633,11 +8633,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_alphax-8chan.ini b/firmware/tunerstudio/generated/rusefi_alphax-8chan.ini index 7e5bebaf87..6d92acc14f 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-8chan.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-8chan.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.alphax-8chan.3654662667" + signature = "rusEFI master.2024.07.20.alphax-8chan.2261705126" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.alphax-8chan.3654662667" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.alphax-8chan.2261705126" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","3A - Aux Analog 2","On-board MAP","32A - PPS Sensor Input","31A - TPS Sensor Input","24 - Ignition Key Voltage","INVALID","INVALID","19A - Aux Analog 6","1A - Aux Analog 1","2A - Aux Analog 4","INVALID","29A - CLT Sensor Input","27A - IAT Sensor Input","INVALID","12A - Aux Analog 8","INVALID","11A - Aux Analog 3","INVALID","34A - PPS2 Sensor Input","33A - TPS2 Sensor Input","INVALID","INVALID","INVALID","4A - Aux Analog 7","INVALID","10A - Aux Analog 5","INVALID","28A - Aux Temp 2","28A - Aux Temp 1","INVALID","20A - Aux Analog 9" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:08:23 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:09:42 UTC 2024 pageSize = 22820 page = 1 @@ -6156,8 +6156,8 @@ menuDialog = main subMenu = compressorDischargeTemperature, "Compressor discharge temp" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8637,11 +8637,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_alphax-8chan_f7.ini b/firmware/tunerstudio/generated/rusefi_alphax-8chan_f7.ini index f371631645..1f25fe6b02 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-8chan_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-8chan_f7.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.alphax-8chan_f7.3654662667" + signature = "rusEFI master.2024.07.20.alphax-8chan_f7.2261705126" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.alphax-8chan_f7.3654662667" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.alphax-8chan_f7.2261705126" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","3A - Aux Analog 2","On-board MAP","32A - PPS Sensor Input","31A - TPS Sensor Input","24 - Ignition Key Voltage","INVALID","INVALID","19A - Aux Analog 6","1A - Aux Analog 1","2A - Aux Analog 4","INVALID","29A - CLT Sensor Input","27A - IAT Sensor Input","INVALID","12A - Aux Analog 8","INVALID","11A - Aux Analog 3","INVALID","34A - PPS2 Sensor Input","33A - TPS2 Sensor Input","INVALID","INVALID","INVALID","4A - Aux Analog 7","INVALID","10A - Aux Analog 5","INVALID","28A - Aux Temp 2","28A - Aux Temp 1","INVALID","20A - Aux Analog 9" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:08:26 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:09:45 UTC 2024 pageSize = 22820 page = 1 @@ -6156,8 +6156,8 @@ menuDialog = main subMenu = compressorDischargeTemperature, "Compressor discharge temp" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8637,11 +8637,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_alphax-silver.ini b/firmware/tunerstudio/generated/rusefi_alphax-silver.ini index 54d0dfc632..b9f04158c7 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-silver.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-silver.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.alphax-silver.1188898185" + signature = "rusEFI master.2024.07.20.alphax-silver.432438820" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.alphax-silver.1188898185" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.alphax-silver.432438820" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","INVALID","INVALID","INVALID","18A - TPS","9A Battery Sense","INVALID","INVALID","INVALID","INVALID","21A - MAP","On-board MAP","19A - CLT","20A - IAT" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:08:12 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:09:31 UTC 2024 pageSize = 22804 page = 1 @@ -6053,6 +6053,7 @@ menuDialog = main subMenu = gppwm3, "General Purpose PWM 3" subMenu = gppwm4, "General Purpose PWM 4" + subMenu = etbTpsBiasCurve, "ETB bias curve (feed forward)" subMenu = std_separator subMenu = vvtPidDialog, "VVT outputs and PID", { vvtMode1 != 0 } @@ -6125,8 +6126,8 @@ menuDialog = main subMenu = compressorDischargeTemperature, "Compressor discharge temp" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -7236,12 +7237,6 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Cylinder 4", cylinderBankSelect4, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 3} field = "Cylinder 5 ", cylinderBankSelect5, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 4} field = "Cylinder 6 ", cylinderBankSelect6, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 5} - field = "Cylinder 7 ", cylinderBankSelect7, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 6} - field = "Cylinder 8 ", cylinderBankSelect8, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 7} - field = "Cylinder 9 ", cylinderBankSelect9, {isInjectionEnabled == 1 && cylindersCount > 8} - field = "Cylinder 10 ", cylinderBankSelect10, {isInjectionEnabled == 1 && cylindersCount > 9} - field = "Cylinder 11 ", cylinderBankSelect11, {isInjectionEnabled == 1 && cylindersCount > 10} - field = "Cylinder 12 ", cylinderBankSelect12, {isInjectionEnabled == 1 && cylindersCount > 11} dialog = injectorNonlinearPolynomial, "Polynomial Adder", yAxis field = "Add nonlinearity below pulse", applyNonlinearBelowPulse @@ -7329,12 +7324,6 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Offset cyl 4", timing_offset_cylinder4, {cylindersCount > 3} field = "Offset cyl 5", timing_offset_cylinder5, {cylindersCount > 4} field = "Offset cyl 6", timing_offset_cylinder6, {cylindersCount > 5} - field = "Offset cyl 7", timing_offset_cylinder7, {cylindersCount > 6} - field = "Offset cyl 8", timing_offset_cylinder8, {cylindersCount > 7} - field = "Offset cyl 9", timing_offset_cylinder9, {cylindersCount > 8} - field = "Offset cyl 10", timing_offset_cylinder10, {cylindersCount > 9} - field = "Offset cyl 11", timing_offset_cylinder11, {cylindersCount > 10} - field = "Offset cyl 12", timing_offset_cylinder12, {cylindersCount > 11} dialog = stagedInjectionOutputs, "", yAxis field = "Injection Stage 2 Output 1", injectionPinsStage21, {isInjectionEnabled && enableStagedInjection} @@ -8583,11 +8572,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_at_start_f435.ini b/firmware/tunerstudio/generated/rusefi_at_start_f435.ini index 11f63381f9..035fdf61f9 100644 --- a/firmware/tunerstudio/generated/rusefi_at_start_f435.ini +++ b/firmware/tunerstudio/generated/rusefi_at_start_f435.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.at_start_f435.2070097455" + signature = "rusEFI master.2024.07.20.at_start_f435.611874178" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.at_start_f435.2070097455" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.at_start_f435.611874178" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:07:08 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:08:29 UTC 2024 pageSize = 22800 page = 1 @@ -6146,8 +6146,8 @@ menuDialog = main subMenu = egtInputs, "EGT" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8659,11 +8659,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_atlas.ini b/firmware/tunerstudio/generated/rusefi_atlas.ini index 41427c9d88..8a50b28af9 100644 --- a/firmware/tunerstudio/generated/rusefi_atlas.ini +++ b/firmware/tunerstudio/generated/rusefi_atlas.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.atlas.1063582305" + signature = "rusEFI master.2024.07.20.atlas.1618977228" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.atlas.1063582305" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.atlas.1618977228" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:07:52 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:09:12 UTC 2024 pageSize = 22300 page = 1 @@ -6146,8 +6146,8 @@ menuDialog = main subMenu = egtInputs, "EGT" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8651,11 +8651,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_f407-discovery.ini b/firmware/tunerstudio/generated/rusefi_f407-discovery.ini index aa71fdaa80..9e8f3792c1 100644 --- a/firmware/tunerstudio/generated/rusefi_f407-discovery.ini +++ b/firmware/tunerstudio/generated/rusefi_f407-discovery.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.f407-discovery.3744650574" + signature = "rusEFI master.2024.07.20.f407-discovery.2150207203" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.f407-discovery.3744650574" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.f407-discovery.2150207203" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:07:22 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:08:43 UTC 2024 pageSize = 22800 page = 1 @@ -6150,8 +6150,8 @@ menuDialog = main subMenu = egtInputs, "EGT" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8670,11 +8670,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_f429-discovery.ini b/firmware/tunerstudio/generated/rusefi_f429-discovery.ini index be19e3ece7..eaf8bb56f2 100644 --- a/firmware/tunerstudio/generated/rusefi_f429-discovery.ini +++ b/firmware/tunerstudio/generated/rusefi_f429-discovery.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.f429-discovery.2070097455" + signature = "rusEFI master.2024.07.20.f429-discovery.611874178" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.f429-discovery.2070097455" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.f429-discovery.611874178" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:07:42 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:09:02 UTC 2024 pageSize = 22800 page = 1 @@ -6146,8 +6146,8 @@ menuDialog = main subMenu = egtInputs, "EGT" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8659,11 +8659,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_f469-discovery.ini b/firmware/tunerstudio/generated/rusefi_f469-discovery.ini index 35c52f4c38..d80eb2978b 100644 --- a/firmware/tunerstudio/generated/rusefi_f469-discovery.ini +++ b/firmware/tunerstudio/generated/rusefi_f469-discovery.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.f469-discovery.1236543676" + signature = "rusEFI master.2024.07.20.f469-discovery.380597009" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.f469-discovery.1236543676" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.f469-discovery.380597009" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:07:48 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:09:08 UTC 2024 pageSize = 22800 page = 1 @@ -6146,8 +6146,8 @@ menuDialog = main subMenu = egtInputs, "EGT" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8659,11 +8659,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini b/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini index 7352248537..11a6eda8e7 100644 --- a/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini +++ b/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.frankenso_na6.769677876" + signature = "rusEFI master.2024.07.20.frankenso_na6.1929052569" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.frankenso_na6.769677876" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.frankenso_na6.1929052569" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","Analog 3O","Analog 3L","Analog 3M","Analog 3J","Analog 3I","INVALID","Analog 3H","Analog 3G","INVALID","INVALID","INVALID","Analog 3P","Analog 3Q","Analog 3N","Analog VBatt","Analog 3E" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:08:34 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:09:53 UTC 2024 pageSize = 22800 page = 1 @@ -6146,8 +6146,8 @@ menuDialog = main subMenu = egtInputs, "EGT" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8659,11 +8659,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_haba208.ini b/firmware/tunerstudio/generated/rusefi_haba208.ini index 11bf3eb589..3863873fc8 100644 --- a/firmware/tunerstudio/generated/rusefi_haba208.ini +++ b/firmware/tunerstudio/generated/rusefi_haba208.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.haba208.2070097455" + signature = "rusEFI master.2024.07.20.haba208.611874178" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.haba208.2070097455" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.haba208.611874178" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:07:09 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:08:30 UTC 2024 pageSize = 22800 page = 1 @@ -6146,8 +6146,8 @@ menuDialog = main subMenu = egtInputs, "EGT" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8659,11 +8659,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_hellen-112-17.ini b/firmware/tunerstudio/generated/rusefi_hellen-112-17.ini index 5961f97a29..96a37f6c5b 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen-112-17.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen-112-17.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.hellen-112-17.4067145387" + signature = "rusEFI master.2024.07.20.hellen-112-17.2909859078" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.hellen-112-17.4067145387" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.hellen-112-17.2909859078" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","B20 TPS Throttle Position 2","A14 Analog Input","INVALID","A21 PPS1","B03 TPS Throttle Position 1","INVALID","A07 TODO","A12 Analog Input","A10 Analog Input","INVALID","B19 MAP","A09 Analog Input","B15 CLT","B27 IAT","A11 Analog Input","A19 Analog Input" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:08:02 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:09:22 UTC 2024 pageSize = 22800 page = 1 @@ -6147,8 +6147,8 @@ menuDialog = main subMenu = compressorDischargeTemperature, "Compressor discharge temp" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8625,11 +8625,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini b/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini index f72c666095..209a9b1aad 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.hellen-gm-e67.3071953303" + signature = "rusEFI master.2024.07.20.hellen-gm-e67.3892384314" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.hellen-gm-e67.3071953303" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.hellen-gm-e67.3892384314" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","C2-60 - Oil Pressure","C3-58 - Baro","C1-47 - PPS1","C2-64 - TPS1","C1-19 Battery Sense","C1-45 Secondary Fuel Level","C3-57 - A/C Pressure","C2-66 - TPS2","C1-44 Primary Fuel Level","C2-65 - Trans Fluids","C3-59 - MAP","C3-55 - CLT","C3-56 - IAT","C1-49 - PPS2","C1-46 Vac Sense" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:08:19 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:09:38 UTC 2024 pageSize = 22800 page = 1 @@ -6147,8 +6147,8 @@ menuDialog = main subMenu = compressorDischargeTemperature, "Compressor discharge temp" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8650,11 +8650,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_hellen-honda-k.ini b/firmware/tunerstudio/generated/rusefi_hellen-honda-k.ini index 17ee05728e..d611f480e2 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen-honda-k.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen-honda-k.ini @@ -4,12 +4,12 @@ enable2ndByteCanID = false [SettingGroups] [MegaTune] - signature = "rusEFI master.2024.07.20.hellen-honda-k.2046998629" + signature = "rusEFI master.2024.07.20.hellen-honda-k.622453704" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.hellen-honda-k.2046998629" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.hellen-honda-k.622453704" ; signature is expected to be 7 or more characters. useLegacyFTempUnits = false ignoreMissingBitOptions = true @@ -5906,7 +5906,6 @@ menuDialog = main subMenu = etbDialog, "Electronic throttle body" subMenu = etbTpsBiasCurve, "ETB bias curve (feed forward)" subMenu = pedalToTpsTbl, "ETB pedal target" - subMenu = throttle2TrimTbl, "ETB #2 Trim", { tps2_1AdcChannel != 0 } subMenu = std_separator subMenu = vvtPidDialog, "VVT outputs and PID", { vvtMode1 != 0 } @@ -5976,8 +5975,8 @@ menuDialog = main subMenu = compressorDischargeTemperature, "Compressor discharge temp" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -7050,14 +7049,6 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Cylinder 2", cylinderBankSelect2, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 1} field = "Cylinder 3", cylinderBankSelect3, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 2} field = "Cylinder 4", cylinderBankSelect4, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 3} - field = "Cylinder 5 ", cylinderBankSelect5, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 4} - field = "Cylinder 6 ", cylinderBankSelect6, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 5} - field = "Cylinder 7 ", cylinderBankSelect7, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 6} - field = "Cylinder 8 ", cylinderBankSelect8, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 7} - field = "Cylinder 9 ", cylinderBankSelect9, {isInjectionEnabled == 1 && cylindersCount > 8} - field = "Cylinder 10 ", cylinderBankSelect10, {isInjectionEnabled == 1 && cylindersCount > 9} - field = "Cylinder 11 ", cylinderBankSelect11, {isInjectionEnabled == 1 && cylindersCount > 10} - field = "Cylinder 12 ", cylinderBankSelect12, {isInjectionEnabled == 1 && cylindersCount > 11} dialog = injectorNonlinearPolynomial, "Polynomial Adder", yAxis field = "Add nonlinearity below pulse", applyNonlinearBelowPulse @@ -7141,14 +7132,6 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Offset cyl 2", timing_offset_cylinder2, {cylindersCount > 1} field = "Offset cyl 3", timing_offset_cylinder3, {cylindersCount > 2} field = "Offset cyl 4", timing_offset_cylinder4, {cylindersCount > 3} - field = "Offset cyl 5", timing_offset_cylinder5, {cylindersCount > 4} - field = "Offset cyl 6", timing_offset_cylinder6, {cylindersCount > 5} - field = "Offset cyl 7", timing_offset_cylinder7, {cylindersCount > 6} - field = "Offset cyl 8", timing_offset_cylinder8, {cylindersCount > 7} - field = "Offset cyl 9", timing_offset_cylinder9, {cylindersCount > 8} - field = "Offset cyl 10", timing_offset_cylinder10, {cylindersCount > 9} - field = "Offset cyl 11", timing_offset_cylinder11, {cylindersCount > 10} - field = "Offset cyl 12", timing_offset_cylinder12, {cylindersCount > 11} dialog = stagedInjectionOutputs, "", yAxis field = "Injection Stage 2 Output 1", injectionPinsStage21, {isInjectionEnabled && enableStagedInjection} @@ -8372,10 +8355,8 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini b/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini index abf5e561be..2ee00c7db3 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.hellen-nb1.2457589775" + signature = "rusEFI master.2024.07.20.hellen-nb1.3445654434" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.hellen-nb1.2457589775" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.hellen-nb1.3445654434" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","2C - O2S","TPS1","intMAP","1G - Steering/RES2","3E - TPS","1B - Battery Sense","2H - CAM","3S - EGR BOOST IN","2A - Pressure Input","2J - CRANK","2L - MAF","3D - MAP","2E - Coolant","2B - IAT","4C - IN TEMP/PPS2","1P - AC Switch" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:08:05 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:09:24 UTC 2024 pageSize = 22800 page = 1 @@ -6147,8 +6147,8 @@ menuDialog = main subMenu = compressorDischargeTemperature, "Compressor discharge temp" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8650,11 +8650,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini b/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini index ab1d252a98..78bbda8ec3 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.hellen121nissan.3742551637" + signature = "rusEFI master.2024.07.20.hellen121nissan.2148111864" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.hellen121nissan.3742551637" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.hellen121nissan.2148111864" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","51 - MAF","INVALID","Aux P68","106 - PPS 1","50 - TPS 1","109 Ignition Key Voltage","INVALID","INVALID","69 - TPS 2","INVALID","Aux P66","Aux P67","73 - CLT","34 - IAT","98 - PPS 2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:08:21 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:09:41 UTC 2024 pageSize = 22800 page = 1 @@ -6074,7 +6074,6 @@ menuDialog = main subMenu = etbDialog, "Electronic throttle body" subMenu = etbTpsBiasCurve, "ETB bias curve (feed forward)" subMenu = pedalToTpsTbl, "ETB pedal target" - subMenu = throttle2TrimTbl, "ETB #2 Trim", { tps2_1AdcChannel != 0 } subMenu = std_separator subMenu = vvtPidDialog, "VVT outputs and PID", { vvtMode1 != 0 } @@ -6147,8 +6146,8 @@ menuDialog = main subMenu = compressorDischargeTemperature, "Compressor discharge temp" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8616,11 +8615,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_hellen121vag.ini b/firmware/tunerstudio/generated/rusefi_hellen121vag.ini index 365beccd87..c7d0cdd208 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen121vag.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen121vag.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.hellen121vag.3404552908" + signature = "rusEFI master.2024.07.20.hellen121vag.2515927393" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.hellen121vag.3404552908" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.hellen121vag.2515927393" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","14 - O2","INVALID","INVALID","34 In PPS1","92 - TPS 1","106 - KNOCK","86 - CAM1","87 - CAM2","84 - TPS2","INVALID","29 In Maf","101 - MAP2","93 - CLT","85 - IAT","35 In PPS2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:07:58 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:09:17 UTC 2024 pageSize = 22800 page = 1 @@ -6074,7 +6074,6 @@ menuDialog = main subMenu = etbDialog, "Electronic throttle body" subMenu = etbTpsBiasCurve, "ETB bias curve (feed forward)" subMenu = pedalToTpsTbl, "ETB pedal target" - subMenu = throttle2TrimTbl, "ETB #2 Trim", { tps2_1AdcChannel != 0 } subMenu = std_separator subMenu = vvtPidDialog, "VVT outputs and PID", { vvtMode1 != 0 } @@ -6147,8 +6146,8 @@ menuDialog = main subMenu = compressorDischargeTemperature, "Compressor discharge temp" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8643,11 +8642,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_hellen128.ini b/firmware/tunerstudio/generated/rusefi_hellen128.ini index b6e8ecc802..10955cbfa4 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen128.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen128.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.hellen128.2532377816" + signature = "rusEFI master.2024.07.20.hellen128.3387580277" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.hellen128.2532377816" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.hellen128.3387580277" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","P36_IN_O2S","P32_IN_O2S2","P40_IN_MAP3","C24 - PPS1","E31 - TPS1","Battery Sense","E40 - IN_CAM","P30_IN_AUX4","E34 - TPS2","E37 - Crank Input","E47 - MAF","E23 - MAP","E29 - Coolant Temp","E45 - IAT","C25 - PPS2","P41_IN_AUX3" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:08:10 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:09:30 UTC 2024 pageSize = 22800 page = 1 @@ -6147,8 +6147,8 @@ menuDialog = main subMenu = compressorDischargeTemperature, "Compressor discharge temp" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8649,11 +8649,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini b/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini index 492e3dc791..273a6b703d 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.hellen154hyundai.537276888" + signature = "rusEFI master.2024.07.20.hellen154hyundai.2132634229" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.hellen154hyundai.537276888" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.hellen154hyundai.2132634229" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","K21 Ambient Temperature","K58 Oil Temp","K54 A/C pressure","PPS 1","TPS 1","K2 Ignition Key Voltage","X10 AIN2","BK2 Wastegate Position - 22","TPS 2","X11 AIN1","Map Sensor K31","K10 Sensor","CLT","IAT","PPS 2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:07:56 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:09:16 UTC 2024 pageSize = 22800 page = 1 @@ -6058,7 +6058,6 @@ menuDialog = main subMenu = etbDialog, "Electronic throttle body" subMenu = etbTpsBiasCurve, "ETB bias curve (feed forward)" subMenu = pedalToTpsTbl, "ETB pedal target" - subMenu = throttle2TrimTbl, "ETB #2 Trim", { tps2_1AdcChannel != 0 } subMenu = std_separator subMenu = vvtPidDialog, "VVT outputs and PID", { vvtMode1 != 0 } @@ -6128,8 +6127,8 @@ menuDialog = main subMenu = compressorDischargeTemperature, "Compressor discharge temp" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -7235,10 +7234,6 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Cylinder 6 ", cylinderBankSelect6, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 5} field = "Cylinder 7 ", cylinderBankSelect7, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 6} field = "Cylinder 8 ", cylinderBankSelect8, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 7} - field = "Cylinder 9 ", cylinderBankSelect9, {isInjectionEnabled == 1 && cylindersCount > 8} - field = "Cylinder 10 ", cylinderBankSelect10, {isInjectionEnabled == 1 && cylindersCount > 9} - field = "Cylinder 11 ", cylinderBankSelect11, {isInjectionEnabled == 1 && cylindersCount > 10} - field = "Cylinder 12 ", cylinderBankSelect12, {isInjectionEnabled == 1 && cylindersCount > 11} dialog = injectorNonlinearPolynomial, "Polynomial Adder", yAxis field = "Add nonlinearity below pulse", applyNonlinearBelowPulse @@ -7330,10 +7325,6 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Offset cyl 6", timing_offset_cylinder6, {cylindersCount > 5} field = "Offset cyl 7", timing_offset_cylinder7, {cylindersCount > 6} field = "Offset cyl 8", timing_offset_cylinder8, {cylindersCount > 7} - field = "Offset cyl 9", timing_offset_cylinder9, {cylindersCount > 8} - field = "Offset cyl 10", timing_offset_cylinder10, {cylindersCount > 9} - field = "Offset cyl 11", timing_offset_cylinder11, {cylindersCount > 10} - field = "Offset cyl 12", timing_offset_cylinder12, {cylindersCount > 11} dialog = stagedInjectionOutputs, "", yAxis field = "Injection Stage 2 Output 1", injectionPinsStage21, {isInjectionEnabled && enableStagedInjection} @@ -8578,10 +8569,8 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_hellen154hyundai_f7.ini b/firmware/tunerstudio/generated/rusefi_hellen154hyundai_f7.ini index 2ea73c8bc2..89e82fe175 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen154hyundai_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen154hyundai_f7.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.hellen154hyundai_f7.707126594" + signature = "rusEFI master.2024.07.20.hellen154hyundai_f7.1967046383" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.hellen154hyundai_f7.707126594" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.hellen154hyundai_f7.1967046383" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","K21 Ambient Temperature","K58 Oil Temp","K54 A/C pressure","PPS 1","TPS 1","K2 Ignition Key Voltage","X10 AIN2","BK2 Wastegate Position - 22","TPS 2","X11 AIN1","Map Sensor K31","K10 Sensor","CLT","IAT","PPS 2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:08:17 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:09:37 UTC 2024 pageSize = 22800 page = 1 @@ -6058,7 +6058,6 @@ menuDialog = main subMenu = etbDialog, "Electronic throttle body" subMenu = etbTpsBiasCurve, "ETB bias curve (feed forward)" subMenu = pedalToTpsTbl, "ETB pedal target" - subMenu = throttle2TrimTbl, "ETB #2 Trim", { tps2_1AdcChannel != 0 } subMenu = std_separator subMenu = vvtPidDialog, "VVT outputs and PID", { vvtMode1 != 0 } @@ -6128,8 +6127,8 @@ menuDialog = main subMenu = compressorDischargeTemperature, "Compressor discharge temp" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -7235,10 +7234,6 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Cylinder 6 ", cylinderBankSelect6, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 5} field = "Cylinder 7 ", cylinderBankSelect7, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 6} field = "Cylinder 8 ", cylinderBankSelect8, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 7} - field = "Cylinder 9 ", cylinderBankSelect9, {isInjectionEnabled == 1 && cylindersCount > 8} - field = "Cylinder 10 ", cylinderBankSelect10, {isInjectionEnabled == 1 && cylindersCount > 9} - field = "Cylinder 11 ", cylinderBankSelect11, {isInjectionEnabled == 1 && cylindersCount > 10} - field = "Cylinder 12 ", cylinderBankSelect12, {isInjectionEnabled == 1 && cylindersCount > 11} dialog = injectorNonlinearPolynomial, "Polynomial Adder", yAxis field = "Add nonlinearity below pulse", applyNonlinearBelowPulse @@ -7330,10 +7325,6 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Offset cyl 6", timing_offset_cylinder6, {cylindersCount > 5} field = "Offset cyl 7", timing_offset_cylinder7, {cylindersCount > 6} field = "Offset cyl 8", timing_offset_cylinder8, {cylindersCount > 7} - field = "Offset cyl 9", timing_offset_cylinder9, {cylindersCount > 8} - field = "Offset cyl 10", timing_offset_cylinder10, {cylindersCount > 9} - field = "Offset cyl 11", timing_offset_cylinder11, {cylindersCount > 10} - field = "Offset cyl 12", timing_offset_cylinder12, {cylindersCount > 11} dialog = stagedInjectionOutputs, "", yAxis field = "Injection Stage 2 Output 1", injectionPinsStage21, {isInjectionEnabled && enableStagedInjection} @@ -8578,10 +8569,8 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_hellen72.ini b/firmware/tunerstudio/generated/rusefi_hellen72.ini index f97a30217a..70c4bff1be 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen72.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen72.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.hellen72.4219656883" + signature = "rusEFI master.2024.07.20.hellen72.2761523486" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.hellen72.4219656883" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.hellen72.2761523486" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","5N - TPS2","3L - IGN_7 / AFR","intMAP (A15)","5P - PPS1","4V - TPS (A17)","4S/4T - Alternator voltage","3V - CAM (A19)","4J - VTCS/AUX4 (A20)","4F - AC_PRES/AUX1 (A23)","3Y - CRANK (A24)","4X - MAF (A9)","4U - MAP2/Ign8 (A10)","4P - CLT (A11)","4N - IAT (A14)","5M - PPS2 OR TEMPERATURE SENSOR","4AE - EGR/MAP4 (A22)" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:07:54 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:09:13 UTC 2024 pageSize = 22800 page = 1 @@ -6147,8 +6147,8 @@ menuDialog = main subMenu = compressorDischargeTemperature, "Compressor discharge temp" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8650,11 +8650,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_hellen81.ini b/firmware/tunerstudio/generated/rusefi_hellen81.ini index 56e692ef40..a820b9dbb9 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen81.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen81.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.hellen81.519290569" + signature = "rusEFI master.2024.07.20.hellen81.1105782116" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.hellen81.519290569" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.hellen81.1105782116" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","18 - IN_O2S","55 - IN_O2S2","41 - IN_MAP3","78 - IN_PPS","16 - IN_TPS","13 - IN_VIGN","79 - IN_CAM","77 - IN_AUX4","74 - IN_AUX1","15 - IN_CRANK (A24)","37 - IN_MAP1","38 - IN_MAP2","39 - IN_CLT","40 - IN_IAT","75 - IN_AUX2","76 - IN_AUX3" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:07:55 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:09:15 UTC 2024 pageSize = 22800 page = 1 @@ -6145,8 +6145,8 @@ menuDialog = main subMenu = compressorDischargeTemperature, "Compressor discharge temp" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8648,11 +8648,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini b/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini index 3cffe4875c..cd67b0bf88 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.hellen88bmw.164670346" + signature = "rusEFI master.2024.07.20.hellen88bmw.1456205863" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.hellen88bmw.164670346" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.hellen88bmw.1456205863" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","VIN5","VIN6","INVALID","PPS1","73 - TPS","56 - Battery Sense","17 - CAM","Aux BARO","Aux TPS2","16 - CRANK","41 - MAF","Aux MAP","78 - CLT","77 - IAT","Aux PPS2","Aux TPS3" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:08:06 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:09:26 UTC 2024 pageSize = 22800 page = 1 @@ -6076,6 +6076,7 @@ menuDialog = main subMenu = pedalToTpsTbl, "ETB pedal target" subMenu = throttle2TrimTbl, "ETB #2 Trim", { tps2_1AdcChannel != 0 } + subMenu = vvtTable2Tbl, "VVT exhaust target", { vvtMode2 != 0 && vvtPins2 != 0 } subMenu = std_separator subMenu = auxInputsDialog, "Lua Analog Inputs" @@ -6143,8 +6144,8 @@ menuDialog = main subMenu = compressorDischargeTemperature, "Compressor discharge temp" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8645,11 +8646,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_hellenNA6.ini b/firmware/tunerstudio/generated/rusefi_hellenNA6.ini index 27ff70c4c6..aeaca3f15a 100644 --- a/firmware/tunerstudio/generated/rusefi_hellenNA6.ini +++ b/firmware/tunerstudio/generated/rusefi_hellenNA6.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.hellenNA6.4022783439" + signature = "rusEFI master.2024.07.20.hellenNA6.2967311970" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.hellenNA6.4022783439" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.hellenNA6.2967311970" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","3N - O2S","2N - Temperature Sensor","intMAP (A15)","4I - PPS1","TPS Input","1B - Battery Sense","INVALID","4G - PPS2 OR TEMPERATURE SENSOR","4H - TPS2","INVALID","3O - MAF","2M - Pressure Sensor","3Q - CLT","3P - IAT","1V - Clutch Switch","1Q AC Switch" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:08:09 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:09:28 UTC 2024 pageSize = 22800 page = 1 @@ -6147,8 +6147,8 @@ menuDialog = main subMenu = compressorDischargeTemperature, "Compressor discharge temp" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8650,11 +8650,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini b/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini index b7db99e4c5..71cf0f1b1e 100644 --- a/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini +++ b/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.hellenNA8_96.270307073" + signature = "rusEFI master.2024.07.20.hellenNA8_96.1325913260" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.hellenNA8_96.270307073" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.hellenNA8_96.1325913260" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","2C - O2S","TPS1","intMAP","PPS1","2F - TPS","3B - Battery Sense","3G - CAM","3S - EGR BOOST IN","2A - Pressure Input","3F - CRANK","2B - MAF","INVALID","2G - Coolant","2B - IAT","4C - IN TEMP/PPS2","1K - AC Switch" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:08:20 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:09:39 UTC 2024 pageSize = 22800 page = 1 @@ -6147,8 +6147,8 @@ menuDialog = main subMenu = compressorDischargeTemperature, "Compressor discharge temp" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8650,11 +8650,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_m74_9.ini b/firmware/tunerstudio/generated/rusefi_m74_9.ini index 903e28b459..362cd36f56 100644 --- a/firmware/tunerstudio/generated/rusefi_m74_9.ini +++ b/firmware/tunerstudio/generated/rusefi_m74_9.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.m74_9.3487110896" + signature = "rusEFI master.2024.07.20.m74_9.2428652893" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.m74_9.3487110896" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.m74_9.2428652893" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","MAF/MAP sensor signal","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","INVALID","Pedal position sensor 1 signal PPS1","Pedal position sensor 2 signal PPS2","ETB TPS position sensor 1 signal","ETB TPS position sensor 2 signal" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:07:51 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:09:11 UTC 2024 pageSize = 22800 page = 1 @@ -6147,8 +6147,8 @@ menuDialog = main subMenu = compressorDischargeTemperature, "Compressor discharge temp" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8652,11 +8652,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_mre-legacy_f4.ini b/firmware/tunerstudio/generated/rusefi_mre-legacy_f4.ini index 004ab770ae..27463140e1 100644 --- a/firmware/tunerstudio/generated/rusefi_mre-legacy_f4.ini +++ b/firmware/tunerstudio/generated/rusefi_mre-legacy_f4.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.mre-legacy_f4.1715753824" + signature = "rusEFI master.2024.07.20.mre-legacy_f4.962529485" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.mre-legacy_f4.1715753824" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.mre-legacy_f4.962529485" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","18 - AN temp 1","23 - AN temp 2","24 - AN temp 3 or Hall Input","22 - AN temp 4 or Hall Input","28 - AN volt 10, Aux Reuse","INVALID","26 - AN volt 2","31 - AN volt 3","36 - AN volt 8, Aux Reuse","40 - AN volt 9, Aux Reuse","27 - AN volt 1","Battery Sense","19 - AN volt 4","20 - AN volt 5","32 - AN volt 6, Aux Reuse","30 - AN volt 7" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:07:43 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:09:03 UTC 2024 pageSize = 24800 page = 1 @@ -6149,8 +6149,8 @@ menuDialog = main subMenu = egtInputs, "EGT" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -7273,10 +7273,6 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Cylinder 6 ", cylinderBankSelect6, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 5} field = "Cylinder 7 ", cylinderBankSelect7, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 6} field = "Cylinder 8 ", cylinderBankSelect8, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 7} - field = "Cylinder 9 ", cylinderBankSelect9, {isInjectionEnabled == 1 && cylindersCount > 8} - field = "Cylinder 10 ", cylinderBankSelect10, {isInjectionEnabled == 1 && cylindersCount > 9} - field = "Cylinder 11 ", cylinderBankSelect11, {isInjectionEnabled == 1 && cylindersCount > 10} - field = "Cylinder 12 ", cylinderBankSelect12, {isInjectionEnabled == 1 && cylindersCount > 11} dialog = injectorNonlinearPolynomial, "Polynomial Adder", yAxis field = "Add nonlinearity below pulse", applyNonlinearBelowPulse @@ -7369,10 +7365,6 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Offset cyl 6", timing_offset_cylinder6, {cylindersCount > 5} field = "Offset cyl 7", timing_offset_cylinder7, {cylindersCount > 6} field = "Offset cyl 8", timing_offset_cylinder8, {cylindersCount > 7} - field = "Offset cyl 9", timing_offset_cylinder9, {cylindersCount > 8} - field = "Offset cyl 10", timing_offset_cylinder10, {cylindersCount > 9} - field = "Offset cyl 11", timing_offset_cylinder11, {cylindersCount > 10} - field = "Offset cyl 12", timing_offset_cylinder12, {cylindersCount > 11} dialog = stagedInjectionOutputs, "", yAxis field = "Injection Stage 2 Output 1", injectionPinsStage21, {isInjectionEnabled && enableStagedInjection} @@ -8633,11 +8625,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_mre_f4.ini b/firmware/tunerstudio/generated/rusefi_mre_f4.ini index c5b9617d43..bf2b7893c9 100644 --- a/firmware/tunerstudio/generated/rusefi_mre_f4.ini +++ b/firmware/tunerstudio/generated/rusefi_mre_f4.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.mre_f4.1715753824" + signature = "rusEFI master.2024.07.20.mre_f4.962529485" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.mre_f4.1715753824" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.mre_f4.962529485" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","18 - AN temp 1","23 - AN temp 2","24 - AN temp 3 or Hall Input","22 - AN temp 4 or Hall Input","28 - AN volt 10, Aux Reuse","INVALID","26 - AN volt 2","31 - AN volt 3","36 - AN volt 8, Aux Reuse","40 - AN volt 9, Aux Reuse","27 - AN volt 1","Battery Sense","19 - AN volt 4","20 - AN volt 5","32 - AN volt 6, Aux Reuse","30 - AN volt 7" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:07:44 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:09:04 UTC 2024 pageSize = 24800 page = 1 @@ -6149,8 +6149,8 @@ menuDialog = main subMenu = egtInputs, "EGT" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -7273,10 +7273,6 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Cylinder 6 ", cylinderBankSelect6, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 5} field = "Cylinder 7 ", cylinderBankSelect7, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 6} field = "Cylinder 8 ", cylinderBankSelect8, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 7} - field = "Cylinder 9 ", cylinderBankSelect9, {isInjectionEnabled == 1 && cylindersCount > 8} - field = "Cylinder 10 ", cylinderBankSelect10, {isInjectionEnabled == 1 && cylindersCount > 9} - field = "Cylinder 11 ", cylinderBankSelect11, {isInjectionEnabled == 1 && cylindersCount > 10} - field = "Cylinder 12 ", cylinderBankSelect12, {isInjectionEnabled == 1 && cylindersCount > 11} dialog = injectorNonlinearPolynomial, "Polynomial Adder", yAxis field = "Add nonlinearity below pulse", applyNonlinearBelowPulse @@ -7369,10 +7365,6 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Offset cyl 6", timing_offset_cylinder6, {cylindersCount > 5} field = "Offset cyl 7", timing_offset_cylinder7, {cylindersCount > 6} field = "Offset cyl 8", timing_offset_cylinder8, {cylindersCount > 7} - field = "Offset cyl 9", timing_offset_cylinder9, {cylindersCount > 8} - field = "Offset cyl 10", timing_offset_cylinder10, {cylindersCount > 9} - field = "Offset cyl 11", timing_offset_cylinder11, {cylindersCount > 10} - field = "Offset cyl 12", timing_offset_cylinder12, {cylindersCount > 11} dialog = stagedInjectionOutputs, "", yAxis field = "Injection Stage 2 Output 1", injectionPinsStage21, {isInjectionEnabled && enableStagedInjection} @@ -8633,11 +8625,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_mre_f7.ini b/firmware/tunerstudio/generated/rusefi_mre_f7.ini index 982261fe46..951ad3c0d4 100644 --- a/firmware/tunerstudio/generated/rusefi_mre_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_mre_f7.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.mre_f7.1715753824" + signature = "rusEFI master.2024.07.20.mre_f7.962529485" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.mre_f7.1715753824" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.mre_f7.962529485" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","18 - AN temp 1","23 - AN temp 2","24 - AN temp 3 or Hall Input","22 - AN temp 4 or Hall Input","28 - AN volt 10, Aux Reuse","INVALID","26 - AN volt 2","31 - AN volt 3","36 - AN volt 8, Aux Reuse","40 - AN volt 9, Aux Reuse","27 - AN volt 1","Battery Sense","19 - AN volt 4","20 - AN volt 5","32 - AN volt 6, Aux Reuse","30 - AN volt 7" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:07:46 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:09:06 UTC 2024 pageSize = 24800 page = 1 @@ -6149,8 +6149,8 @@ menuDialog = main subMenu = egtInputs, "EGT" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -7273,10 +7273,6 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Cylinder 6 ", cylinderBankSelect6, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 5} field = "Cylinder 7 ", cylinderBankSelect7, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 6} field = "Cylinder 8 ", cylinderBankSelect8, {isInjectionEnabled == 1 && injectionMode != 3 && cylindersCount > 7} - field = "Cylinder 9 ", cylinderBankSelect9, {isInjectionEnabled == 1 && cylindersCount > 8} - field = "Cylinder 10 ", cylinderBankSelect10, {isInjectionEnabled == 1 && cylindersCount > 9} - field = "Cylinder 11 ", cylinderBankSelect11, {isInjectionEnabled == 1 && cylindersCount > 10} - field = "Cylinder 12 ", cylinderBankSelect12, {isInjectionEnabled == 1 && cylindersCount > 11} dialog = injectorNonlinearPolynomial, "Polynomial Adder", yAxis field = "Add nonlinearity below pulse", applyNonlinearBelowPulse @@ -7369,10 +7365,6 @@ dialog = lambda_monitorDialog, "lambda_monitor" field = "Offset cyl 6", timing_offset_cylinder6, {cylindersCount > 5} field = "Offset cyl 7", timing_offset_cylinder7, {cylindersCount > 6} field = "Offset cyl 8", timing_offset_cylinder8, {cylindersCount > 7} - field = "Offset cyl 9", timing_offset_cylinder9, {cylindersCount > 8} - field = "Offset cyl 10", timing_offset_cylinder10, {cylindersCount > 9} - field = "Offset cyl 11", timing_offset_cylinder11, {cylindersCount > 10} - field = "Offset cyl 12", timing_offset_cylinder12, {cylindersCount > 11} dialog = stagedInjectionOutputs, "", yAxis field = "Injection Stage 2 Output 1", injectionPinsStage21, {isInjectionEnabled && enableStagedInjection} @@ -8633,11 +8625,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_nucleo_f413.ini b/firmware/tunerstudio/generated/rusefi_nucleo_f413.ini index 21ea1cdd84..e452247876 100644 --- a/firmware/tunerstudio/generated/rusefi_nucleo_f413.ini +++ b/firmware/tunerstudio/generated/rusefi_nucleo_f413.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.nucleo_f413.2070097455" + signature = "rusEFI master.2024.07.20.nucleo_f413.611874178" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.nucleo_f413.2070097455" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.nucleo_f413.611874178" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:07:47 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:09:07 UTC 2024 pageSize = 22800 page = 1 @@ -6146,8 +6146,8 @@ menuDialog = main subMenu = egtInputs, "EGT" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8659,11 +8659,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_prometheus_405.ini b/firmware/tunerstudio/generated/rusefi_prometheus_405.ini index 37de7e3b78..2046281de3 100644 --- a/firmware/tunerstudio/generated/rusefi_prometheus_405.ini +++ b/firmware/tunerstudio/generated/rusefi_prometheus_405.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.prometheus_405.1274536895" + signature = "rusEFI master.2024.07.20.prometheus_405.351057938" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.prometheus_405.1274536895" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.prometheus_405.351057938" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:07:15 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:08:35 UTC 2024 pageSize = 22800 page = 1 @@ -6068,6 +6068,8 @@ menuDialog = main subMenu = gppwm3, "General Purpose PWM 3" subMenu = gppwm4, "General Purpose PWM 4" + subMenu = etbTpsBiasCurve, "ETB bias curve (feed forward)" + subMenu = throttle2TrimTbl, "ETB #2 Trim", { tps2_1AdcChannel != 0 } subMenu = std_separator subMenu = vvtPidDialog, "VVT outputs and PID", { vvtMode1 != 0 } @@ -6141,8 +6143,8 @@ menuDialog = main subMenu = egtInputs, "EGT" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8653,11 +8655,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_prometheus_469.ini b/firmware/tunerstudio/generated/rusefi_prometheus_469.ini index 5b1c26e0db..ea1b4b316b 100644 --- a/firmware/tunerstudio/generated/rusefi_prometheus_469.ini +++ b/firmware/tunerstudio/generated/rusefi_prometheus_469.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.prometheus_469.1274536895" + signature = "rusEFI master.2024.07.20.prometheus_469.351057938" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.prometheus_469.1274536895" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.prometheus_469.351057938" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:07:16 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:08:36 UTC 2024 pageSize = 22800 page = 1 @@ -6068,6 +6068,8 @@ menuDialog = main subMenu = gppwm3, "General Purpose PWM 3" subMenu = gppwm4, "General Purpose PWM 4" + subMenu = etbTpsBiasCurve, "ETB bias curve (feed forward)" + subMenu = throttle2TrimTbl, "ETB #2 Trim", { tps2_1AdcChannel != 0 } subMenu = std_separator subMenu = vvtPidDialog, "VVT outputs and PID", { vvtMode1 != 0 } @@ -6141,8 +6143,8 @@ menuDialog = main subMenu = egtInputs, "EGT" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8653,11 +8655,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_proteus_f4.ini b/firmware/tunerstudio/generated/rusefi_proteus_f4.ini index 3a15566bcf..082fe3a5ef 100644 --- a/firmware/tunerstudio/generated/rusefi_proteus_f4.ini +++ b/firmware/tunerstudio/generated/rusefi_proteus_f4.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.proteus_f4.2440598541" + signature = "rusEFI master.2024.07.20.proteus_f4.3462647712" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.proteus_f4.2440598541" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.proteus_f4.3462647712" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","Analog Volt 5","Analog Volt 6","Analog Volt 7","Analog Volt 8","Analog Volt 9","Analog Volt 10","Analog Volt 11","Battery Sense","Analog Temp 3","Analog Temp 4","Analog Volt 1","Analog Volt 2","Analog Volt 3","Analog Volt 4","Analog Temp 1","Analog Temp 2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:07:26 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:08:46 UTC 2024 pageSize = 28300 page = 1 @@ -6160,8 +6160,8 @@ menuDialog = main subMenu = egtInputs, "EGT" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8688,11 +8688,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_proteus_f7.ini b/firmware/tunerstudio/generated/rusefi_proteus_f7.ini index 010bc2d97d..8eded3ce06 100644 --- a/firmware/tunerstudio/generated/rusefi_proteus_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_proteus_f7.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.proteus_f7.2440598541" + signature = "rusEFI master.2024.07.20.proteus_f7.3462647712" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.proteus_f7.2440598541" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.proteus_f7.3462647712" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","Analog Volt 5","Analog Volt 6","Analog Volt 7","Analog Volt 8","Analog Volt 9","Analog Volt 10","Analog Volt 11","Battery Sense","Analog Temp 3","Analog Temp 4","Analog Volt 1","Analog Volt 2","Analog Volt 3","Analog Volt 4","Analog Temp 1","Analog Temp 2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:07:28 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:08:48 UTC 2024 pageSize = 28300 page = 1 @@ -6160,8 +6160,8 @@ menuDialog = main subMenu = egtInputs, "EGT" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8688,11 +8688,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_proteus_h7.ini b/firmware/tunerstudio/generated/rusefi_proteus_h7.ini index 892162bbaa..f302568637 100644 --- a/firmware/tunerstudio/generated/rusefi_proteus_h7.ini +++ b/firmware/tunerstudio/generated/rusefi_proteus_h7.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.proteus_h7.2440598541" + signature = "rusEFI master.2024.07.20.proteus_h7.3462647712" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.proteus_h7.2440598541" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.proteus_h7.3462647712" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","Analog Volt 5","Analog Volt 6","Analog Volt 7","Analog Volt 8","Analog Volt 9","Analog Volt 10","Analog Volt 11","Battery Sense","Analog Temp 3","Analog Temp 4","Analog Volt 1","Analog Volt 2","Analog Volt 3","Analog Volt 4","Analog Temp 1","Analog Temp 2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:07:29 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:08:49 UTC 2024 pageSize = 28300 page = 1 @@ -6160,8 +6160,8 @@ menuDialog = main subMenu = egtInputs, "EGT" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8688,11 +8688,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_s105.ini b/firmware/tunerstudio/generated/rusefi_s105.ini index 29ab700dd7..b4af1cbd6c 100644 --- a/firmware/tunerstudio/generated/rusefi_s105.ini +++ b/firmware/tunerstudio/generated/rusefi_s105.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.s105.3303583469" + signature = "rusEFI master.2024.07.20.s105.2616456512" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.s105.3303583469" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.s105.2616456512" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","56 - MAP","16 - TPS","19 - Knock","39 - CLT","INVALID","opt 55 - AFR 2","opt 21 - AC Press","18 - AFR 1","13 - Ignition switch in (15)","44 - +12 sense (MR)","INVALID","na 37 - MAF","INVALID","INVALID","40 - IAT" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:07:50 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:09:09 UTC 2024 pageSize = 22800 page = 1 @@ -6147,8 +6147,8 @@ menuDialog = main subMenu = compressorDischargeTemperature, "Compressor discharge temp" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8650,11 +8650,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_small-can-board.ini b/firmware/tunerstudio/generated/rusefi_small-can-board.ini index bf8e50defa..796bb25de5 100644 --- a/firmware/tunerstudio/generated/rusefi_small-can-board.ini +++ b/firmware/tunerstudio/generated/rusefi_small-can-board.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.small-can-board.3717073933" + signature = "rusEFI master.2024.07.20.small-can-board.2190825376" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.small-can-board.3717073933" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.small-can-board.2190825376" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","INVALID","B2 - Analog/Digital Input","B3 - Analog/Digital Input","B4 - Analog/Digital Input","B5 - Analog/Digital Input","B7 - Analog/Digital Input","C1 - Analog/Digital Input 6","INVALID","INVALID","INVALID","A2 Battery Sense","INVALID","INVALID","C2 - Analog/Digital Input 7","C4 - Analog/Digital Input 8" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:08:14 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:09:34 UTC 2024 pageSize = 22800 page = 1 @@ -6145,8 +6145,8 @@ menuDialog = main subMenu = compressorDischargeTemperature, "Compressor discharge temp" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8651,11 +8651,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_stm32f429_nucleo.ini b/firmware/tunerstudio/generated/rusefi_stm32f429_nucleo.ini index 7d36dbcbe5..10d6133070 100644 --- a/firmware/tunerstudio/generated/rusefi_stm32f429_nucleo.ini +++ b/firmware/tunerstudio/generated/rusefi_stm32f429_nucleo.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.stm32f429_nucleo.2070097455" + signature = "rusEFI master.2024.07.20.stm32f429_nucleo.611874178" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.stm32f429_nucleo.2070097455" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.stm32f429_nucleo.611874178" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:07:40 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:09:00 UTC 2024 pageSize = 22800 page = 1 @@ -6146,8 +6146,8 @@ menuDialog = main subMenu = egtInputs, "EGT" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8659,11 +8659,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_stm32f767_nucleo.ini b/firmware/tunerstudio/generated/rusefi_stm32f767_nucleo.ini index 8e2e84cd97..70b560d3b6 100644 --- a/firmware/tunerstudio/generated/rusefi_stm32f767_nucleo.ini +++ b/firmware/tunerstudio/generated/rusefi_stm32f767_nucleo.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.stm32f767_nucleo.2070097455" + signature = "rusEFI master.2024.07.20.stm32f767_nucleo.611874178" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.stm32f767_nucleo.2070097455" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.stm32f767_nucleo.611874178" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:07:18 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:08:39 UTC 2024 pageSize = 22800 page = 1 @@ -6146,8 +6146,8 @@ menuDialog = main subMenu = egtInputs, "EGT" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8659,11 +8659,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_stm32h743_nucleo.ini b/firmware/tunerstudio/generated/rusefi_stm32h743_nucleo.ini index af5ac88989..2df83aee90 100644 --- a/firmware/tunerstudio/generated/rusefi_stm32h743_nucleo.ini +++ b/firmware/tunerstudio/generated/rusefi_stm32h743_nucleo.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.stm32h743_nucleo.2070097455" + signature = "rusEFI master.2024.07.20.stm32h743_nucleo.611874178" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.stm32h743_nucleo.2070097455" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.stm32h743_nucleo.611874178" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:07:10 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:08:31 UTC 2024 pageSize = 22800 page = 1 @@ -6146,8 +6146,8 @@ menuDialog = main subMenu = egtInputs, "EGT" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8659,11 +8659,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini b/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini index ed58f08404..e70139c60b 100644 --- a/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.subaru_eg33_f7.608310897" + signature = "rusEFI master.2024.07.20.subaru_eg33_f7.2069450204" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.subaru_eg33_f7.608310897" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.subaru_eg33_f7.2069450204" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","AUX0_18 - MAP Ain","INVALID","INVALID","B05 - MAF Ain","INVALID","AUX0_19 - IAT Ain","A02 - VBat","INVALID","A06 - Oxyg 2 Ain","A04 - EGR t Ain","INVALID","A18 - AUX0 Ain","B02 - TPS Ain","INVALID","A03 - Coolant t Ain","A06 - Oxyg 1 Ain" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:07:12 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:08:32 UTC 2024 pageSize = 22800 page = 1 @@ -6145,8 +6145,8 @@ menuDialog = main subMenu = compressorDischargeTemperature, "Compressor discharge temp" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8657,11 +8657,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_t-b-g.ini b/firmware/tunerstudio/generated/rusefi_t-b-g.ini index 2682a796f0..fe7ce625a3 100644 --- a/firmware/tunerstudio/generated/rusefi_t-b-g.ini +++ b/firmware/tunerstudio/generated/rusefi_t-b-g.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.t-b-g.2070097455" + signature = "rusEFI master.2024.07.20.t-b-g.611874178" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.t-b-g.2070097455" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.t-b-g.611874178" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:07:25 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:08:45 UTC 2024 pageSize = 22800 page = 1 @@ -6146,8 +6146,8 @@ menuDialog = main subMenu = egtInputs, "EGT" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8659,11 +8659,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini b/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini index 5842279726..a890252123 100644 --- a/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini +++ b/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.tdg-pdm8.1095668391" + signature = "rusEFI master.2024.07.20.tdg-pdm8.508938506" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.tdg-pdm8.1095668391" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.tdg-pdm8.508938506" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","INVALID","INVALID","INVALID","INVALID","Battery Sense","INVALID","INVALID","INVALID","Sense 7","Sense 8","Sense 1","Sense 2","Sense 3","Sense 4","Sense 5","Sense 6" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:07:17 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:08:37 UTC 2024 pageSize = 22800 page = 1 @@ -6146,8 +6146,8 @@ menuDialog = main subMenu = egtInputs, "EGT" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8659,11 +8659,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_uaefi.ini b/firmware/tunerstudio/generated/rusefi_uaefi.ini index 35175acbd4..36c9ee87ce 100644 --- a/firmware/tunerstudio/generated/rusefi_uaefi.ini +++ b/firmware/tunerstudio/generated/rusefi_uaefi.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.uaefi.1040430001" + signature = "rusEFI master.2024.07.20.uaefi.1629022236" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.uaefi.1040430001" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.uaefi.1629022236" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="NONE","D1 AUX1","C3 AUX2","INVALID","D6 PPS1","D13 TPS1","A7 Voltage From Key","INVALID","C15 Fuel Pressure / AUX3","C14 TPS2","INVALID","D9 MAP","On-board MAP","D16 CLT Coolant","D15 IAT","C4 PPS2" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:08:33 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:09:52 UTC 2024 pageSize = 22800 page = 1 @@ -6160,8 +6160,8 @@ menuDialog = main subMenu = compressorDischargeTemperature, "Compressor discharge temp" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8655,11 +8655,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/firmware/tunerstudio/generated/rusefi_uaefi121.ini b/firmware/tunerstudio/generated/rusefi_uaefi121.ini index f88a1742c5..2c0c0f6825 100644 --- a/firmware/tunerstudio/generated/rusefi_uaefi121.ini +++ b/firmware/tunerstudio/generated/rusefi_uaefi121.ini @@ -38,12 +38,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI master.2024.07.20.uaefi121.697599773" + signature = "rusEFI master.2024.07.20.uaefi121.1989139632" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI master.2024.07.20.uaefi121.697599773" ; signature is expected to be 7 or more characters. + signature= "rusEFI master.2024.07.20.uaefi121.1989139632" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -100,7 +100,7 @@ enable2ndByteCanID = false #define adc_channel_e_list="Disabled", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PB0", "PB1", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5" ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:08:13 UTC 2024 +; this section was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:09:33 UTC 2024 pageSize = 22800 page = 1 @@ -6160,8 +6160,8 @@ menuDialog = main subMenu = compressorDischargeTemperature, "Compressor discharge temp" subMenu = wastegateIdlePos, "Wastegate and idle position sensors" subMenu = acPressureSensor, "A/C Pressure" - subMenu = std_separator + subMenu = std_separator subMenu = auxLinearSensors, "Aux Sensors" menu = "CAN-bus" @@ -8653,11 +8653,9 @@ dialog = lambda_monitorDialog, "lambda_monitor" dialog = vvtPidDialog0, "Configuration" field = "Activation Delay", vvtActivationDelayMs field = "Do not control below RPM", vvtControlMinRpm - field = "VVT solenoid bank 1 intake", vvtPins1 field = "VVT solenoid bank 1 exhaust", vvtPins2 field = "VVT solenoid bank 2 intake", vvtPins3 field = "VVT solenoid bank 2 exhaust", vvtPins4 - field = "PWM frequency", vvtOutputFrequency, {vvtPins1 != 0 || vvtPins2 != 0} field = "VVT solenoid intake cams control direction", invertVvtControlIntake, { vvtPins1 != 0 || vvtPins3 != 0 } field = "VVT solenoid exhaust cams control direction", invertVvtControlExhaust, { vvtPins2 != 0 || vvtPins4 != 0 } diff --git a/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java b/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java index 1a56cfd801..8e48b472b7 100644 --- a/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java +++ b/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java @@ -1,6 +1,6 @@ package com.rusefi.config.generated; -// this file was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 00:08:38 UTC 2024 +// this file was generated automatically by rusEFI tool config_definition-all.jar based on (unknown script) integration/rusefi_config.txt Sat Jul 20 04:09:57 UTC 2024 // by class com.rusefi.output.FileJavaFieldsConsumer import com.rusefi.config.*; @@ -1466,7 +1466,7 @@ public class Fields { public static final int TS_RESPONSE_UNDERRUN = 0x80; public static final int TS_RESPONSE_UNRECOGNIZED_COMMAND = 0x83; public static final char TS_SET_LOGGER_SWITCH = 'l'; - public static final String TS_SIGNATURE = "rusEFI master.2024.07.20.f407-discovery.3744650574"; + public static final String TS_SIGNATURE = "rusEFI master.2024.07.20.f407-discovery.2150207203"; public static final char TS_SIMULATE_CAN = '>'; public static final char TS_SINGLE_WRITE_COMMAND = 'W'; public static final char TS_TEST_COMMAND = 't';