From 4b91df6780c17f6e71a58e5ac4ab36ff801e92bb Mon Sep 17 00:00:00 2001 From: rusefi Date: Fri, 1 May 2020 16:51:18 -0400 Subject: [PATCH] OMG usability --- hardware/CJ125_board/known_issues.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/hardware/CJ125_board/known_issues.txt b/hardware/CJ125_board/known_issues.txt index 76ba054721..eb8c1581e8 100644 --- a/hardware/CJ125_board/known_issues.txt +++ b/hardware/CJ125_board/known_issues.txt @@ -17,4 +17,5 @@ 17) and the GND ring around pin 22 CF for better RF rejection. 18) RESOLVED IN R0.4.1 change label from sf.net/projects/rusefi/ to rusefi.com 18) RESOLVED IN R0.4.2 Added LSU 4.2 and 4.9 notes about installing W1 and W2, etc. -19) D2 is reported to not turn off. It is believed the leakage of DIAHD pin is keeping it on even when the MOSFET is off. Unfortunately there is no solid math, or data to back this up. We need to look at what is required to make the LED blink, as well we need to look at the potential this parallel path is causing the heater measurement to measure wrong. \ No newline at end of file +19) D2 is reported to not turn off. It is believed the leakage of DIAHD pin is keeping it on even when the MOSFET is off. Unfortunately there is no solid math, or data to back this up. We need to look at what is required to make the LED blink, as well we need to look at the potential this parallel path is causing the heater measurement to measure wrong. +20) Change DIAHG silkscreen to GATE or Heater Gate or something less confusing than DIAHG