From 52799b9452c39e648b8e3a0815a693123dfed007 Mon Sep 17 00:00:00 2001 From: rusefillc Date: Thu, 14 Nov 2024 17:05:54 -0500 Subject: [PATCH] only:datasheet --- firmware/config/boards/hellen_meta.h | 3 +++ firmware/config/boards/hellen_mm100_meta.h | 2 ++ firmware/config/boards/hellen_mm176_meta.h | 1 + 3 files changed, 6 insertions(+) diff --git a/firmware/config/boards/hellen_meta.h b/firmware/config/boards/hellen_meta.h index 01fc6966c4..b5dc36d75f 100644 --- a/firmware/config/boards/hellen_meta.h +++ b/firmware/config/boards/hellen_meta.h @@ -100,6 +100,7 @@ void detectHellenBoardType(); #define H144_GP9 Gpio::F2 #define H144_OUT_IO1 D3 +// TIM1_CH2 #define H144_OUT_IO2 A9 #define H144_OUT_IO3 G14 #define H144_OUT_IO4 G5 @@ -110,6 +111,7 @@ void detectHellenBoardType(); #define H144_OUT_IO9 G13 #define H144_OUT_IO10 G12 #define H144_OUT_IO11 G2 +// TIM1_CH1 #define H144_OUT_IO12 A8 #define H144_OUT_IO13 G6 @@ -169,6 +171,7 @@ void detectHellenBoardType(); #define H144_IN_AUX2 EFI_ADC_14 // fun fact: same input goes to TWO stm32 pins so that we can use it both as analog and ICU capture //#define H144_IN_AUX2_DIGITAL C4 +// TIM1_CH1 #define H144_IN_AUX2_DIGITAL E9 // AIN20 PA7 diff --git a/firmware/config/boards/hellen_mm100_meta.h b/firmware/config/boards/hellen_mm100_meta.h index 273f6613e0..eed3ac8ec0 100644 --- a/firmware/config/boards/hellen_mm100_meta.h +++ b/firmware/config/boards/hellen_mm100_meta.h @@ -12,6 +12,7 @@ #define MM100_INJ1 D3 // uaefi121 is the first board compatible with CAN bus ST bootloader, we had to adjust a few pins #define MM100_MEGA_UAEFI_INJ1 D0 +// TIM1_CH1 #define MM100_INJ2 A9 #define MM100_INJ3 D11 #define MM100_INJ4 D10 @@ -32,6 +33,7 @@ #define MM100_IN_CRANK_ANALOG EFI_ADC_9 #define MM100_IN_CAM A6 #define MM100_IN_CAM_ANALOG EFI_ADC_6 +// TIM1_CH2 #define MM100_IN_VSS E11 #define MM100_IN_TPS A4 #define MM100_IN_TPS_ANALOG EFI_ADC_4 diff --git a/firmware/config/boards/hellen_mm176_meta.h b/firmware/config/boards/hellen_mm176_meta.h index 2e350e93d6..c92bf8e1ea 100644 --- a/firmware/config/boards/hellen_mm176_meta.h +++ b/firmware/config/boards/hellen_mm176_meta.h @@ -99,6 +99,7 @@ #define MM176_IN_D1 E12 #define MM176_IN_D2 E13 +// TIM1_CH4 #define MM176_IN_D3 E14 #define MM176_IN_D4 E15