From 5c5705c0a10ff53c266fb04a8d8e8def86831f99 Mon Sep 17 00:00:00 2001
From: rusEfi <russianefi@gmail.com>
Date: Thu, 15 Jan 2015 16:03:57 -0600
Subject: [PATCH] auto-sync

---
 .../controllers/algo/engine_configuration.h   | 83 +++++++++++++------
 firmware/rusefi_config.ini                    | 19 ++++-
 2 files changed, 76 insertions(+), 26 deletions(-)

diff --git a/firmware/controllers/algo/engine_configuration.h b/firmware/controllers/algo/engine_configuration.h
index 887ac2566a..fa6a853fc5 100644
--- a/firmware/controllers/algo/engine_configuration.h
+++ b/firmware/controllers/algo/engine_configuration.h
@@ -296,47 +296,82 @@ typedef struct {
  *  todo: re-arrange this structure one we have a stable code version
  */
 typedef struct {
-	// WARNING: by default, our small enums are ONE BYTE. but if the are surrounded by non-enums - alignments do the trick
+	// this section was generated by config_definition.jar on Thu Jan 15 15:59:00 EST 2015
+	// begin
+	/**
+	 * http://rusefi.com/wiki/index.php?title=Manual:Engine_Type
+	 * offset 0
+	*/
 	engine_type_e engineType;
 	/**
 	 * this magic number is used to make sure that what we read from Flash is in fact some configuration
-	 */
+	 * offset 4
+	*/
 	int headerMagicValue;
-
-	float battInjectorLagCorrBins[VBAT_INJECTOR_CURVE_SIZE]; // size 32, offset 8
-	float battInjectorLagCorr[VBAT_INJECTOR_CURVE_SIZE]; // size 32, offset 40
-
-	float cltFuelCorrBins[CLT_CURVE_SIZE]; // size 64, offset 72
-	float cltFuelCorr[CLT_CURVE_SIZE]; // size 64, offset 136
-
-	float iatFuelCorrBins[IAT_CURVE_SIZE]; // size 64, offset 200
-	float iatFuelCorr[IAT_CURVE_SIZE]; // size 64, offset 264
-
+	/**
+	 * offset 8
+	*/
+	float battInjectorLagCorrBins[VBAT_INJECTOR_CURVE_SIZE];
+	/**
+	 * offset 40
+	*/
+	float battInjectorLagCorr[VBAT_INJECTOR_CURVE_SIZE];
+	/**
+	 * offset 72
+	*/
+	float cltFuelCorrBins[CLT_CURVE_SIZE];
+	/**
+	 * offset 136
+	*/
+	float cltFuelCorr[CLT_CURVE_SIZE];
+	/**
+	 * offset 200
+	*/
+	float iatFuelCorrBins[IAT_CURVE_SIZE];
+	/**
+	 * offset 264
+	*/
+	float iatFuelCorr[IAT_CURVE_SIZE];
 	/**
 	 * Should the trigger emulator push data right into trigger input, eliminating the need for physical jumper wires?
 	 * PS: Funny name, right? :)
 	 * todo: make this a bit on some bit field
-	 */
-	int16_t directSelfStimulation; // size 2, offset 328
-
-	// todo: extract these two fields into a structure
-	// todo: we need two sets of TPS parameters - modern ETBs have to sensors
-	int16_t tpsMin; // size 2, offset 330
-	// tpsMax value as 10 bit ADC value. Not Voltage!
-	int16_t tpsMax; // size 2, offset 332
+	 * offset 328
+	*/
+	int16_t directSelfStimulation;
+	/**
+	 * todo: extract these two fields into a structure
+	 * todo: we need two sets of TPS parameters - modern ETBs have to sensors
+	 * offset 330
+	*/
+	int16_t tpsMin;
+	/**
+	 * tpsMax value as 10 bit ADC value. Not Voltage!
+	 * offset 332
+	*/
+	int16_t tpsMax;
+	/**
+	 * offset 334
+	*/
 	int16_t analogChartMode;
-
 	/**
 	 * todo: finish implementation. These values are used for TPS disconnect detection
-	 */
+	 * offset 336
+	*/
 	int16_t tpsErrorLowValue;
+	/**
+	 * offset 338
+	*/
 	int16_t tpsErrorHighValue;
-
+	/**
+	 * offset 340
+	*/
 	float primingSquirtDurationMs;
 	/**
 	 * 360 for two-stroke
 	 * 720 for four-stroke
-	 */
+	 * offset 344
+	*/
 	int engineCycle;
 
 	cranking_parameters_s crankingSettings;
diff --git a/firmware/rusefi_config.ini b/firmware/rusefi_config.ini
index e64d615d3a..4fc1aef9bd 100644
--- a/firmware/rusefi_config.ini
+++ b/firmware/rusefi_config.ini
@@ -7,6 +7,17 @@
 ! each field is declared as
 ! type;name;comment
 
+
+struct cranking_parameters_s
+
+end_struct
+
+
+
+
+
+
+
 engine_type_e;engineType;http://rusefi.com/wiki/index.php?title=Manual:Engine_Type
 
 int;headerMagicValue;this magic number is used to make sure that what we read from Flash is in fact some configuration
@@ -30,8 +41,12 @@ array float IAT_CURVE_SIZE;iatFuelCorr;
 int16_t;directSelfStimulation;Should the trigger emulator push data right into trigger input, eliminating the need for physical jumper wires?\nPS: Funny name, right? :)\ntodo: make this a bit on some bit field
 
 int16_t;tpsMin;todo: extract these two fields into a structure\ntodo: we need two sets of TPS parameters - modern ETBs have to sensors
+int16_t;tpsMax;tpsMax value as 10 bit ADC value. Not Voltage!
 
-int16_t;analogChartMode;todo: finish implementation. These values are used for TPS disconnect detection
-int16_t;tpsErrorLowValue;
+int16_t;analogChartMode;
+
+int16_t;tpsErrorLowValue;todo: finish implementation. These values are used for TPS disconnect detection
 int16_t;tpsErrorHighValue
 
+float;primingSquirtDurationMs
+int;engineCycle;360 for two-stroke\n720 for four-stroke
\ No newline at end of file