diff --git a/firmware/config/boards/cypress/config/controllers/algo/rusefi_generated.h b/firmware/config/boards/cypress/config/controllers/algo/rusefi_generated.h index 163009c70b..ee3dfd020d 100644 --- a/firmware/config/boards/cypress/config/controllers/algo/rusefi_generated.h +++ b/firmware/config/boards/cypress/config/controllers/algo/rusefi_generated.h @@ -1045,7 +1045,7 @@ #define SENT_INPUT_COUNT 1 #define show_Frankenso_presets true #define show_test_presets true -#define SIGNATURE_HASH snap_13528 +#define SIGNATURE_HASH snap_46130 #define specs_s_size 12 #define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4" #define spi_device_e_SPI_DEVICE_1 1 @@ -1320,7 +1320,7 @@ #define ts_show_vbatt true #define ts_show_vr_threshold_2 true #define ts_show_vr_threshold_all true -#define TS_SIGNATURE "rusEFI 2023.01.18.cypress.snap_13528" +#define TS_SIGNATURE "rusEFI 2023.01.20.cypress.snap_46130" #define TS_SINGLE_WRITE_COMMAND 'W' #define TS_SINGLE_WRITE_COMMAND_char W #define TS_TEST_COMMAND 't' diff --git a/firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h b/firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h index 7eca5e1a14..598a44bcb4 100644 --- a/firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h +++ b/firmware/config/boards/kinetis/config/controllers/algo/rusefi_generated.h @@ -1045,7 +1045,7 @@ #define SENT_INPUT_COUNT 1 #define show_Frankenso_presets true #define show_test_presets true -#define SIGNATURE_HASH snap_38420 +#define SIGNATURE_HASH snap_5886 #define specs_s_size 12 #define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4" #define spi_device_e_SPI_DEVICE_1 1 @@ -1320,7 +1320,7 @@ #define ts_show_vbatt true #define ts_show_vr_threshold_2 true #define ts_show_vr_threshold_all true -#define TS_SIGNATURE "rusEFI 2023.01.18.kin.snap_38420" +#define TS_SIGNATURE "rusEFI 2023.01.20.kin.snap_5886" #define TS_SINGLE_WRITE_COMMAND 'W' #define TS_SINGLE_WRITE_COMMAND_char W #define TS_TEST_COMMAND 't' diff --git a/firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h b/firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h index 6fd2298896..c6b56c23bd 100644 --- a/firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h +++ b/firmware/config/boards/subaru_eg33/config/controllers/algo/rusefi_generated.h @@ -995,7 +995,7 @@ #define show_Frankenso_presets false #define show_Proteus_presets false #define show_test_presets false -#define SIGNATURE_HASH snap_60674 +#define SIGNATURE_HASH snap_28136 #define specs_s_size 12 #define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4" #define spi_device_e_SPI_DEVICE_1 1 @@ -1271,7 +1271,7 @@ #define ts_show_vbatt true #define ts_show_vr_threshold_2 true #define ts_show_vr_threshold_all true -#define TS_SIGNATURE "rusEFI 2023.01.18.subaru_eg33_f7.snap_60674" +#define TS_SIGNATURE "rusEFI 2023.01.20.subaru_eg33_f7.snap_28136" #define TS_SINGLE_WRITE_COMMAND 'W' #define TS_SINGLE_WRITE_COMMAND_char W #define TS_TEST_COMMAND 't' diff --git a/firmware/controllers/generated/rusefi_generated.h b/firmware/controllers/generated/rusefi_generated.h index 7a7aafe004..990bc40553 100644 --- a/firmware/controllers/generated/rusefi_generated.h +++ b/firmware/controllers/generated/rusefi_generated.h @@ -1045,7 +1045,7 @@ #define SENT_INPUT_COUNT 1 #define show_Frankenso_presets true #define show_test_presets true -#define SIGNATURE_HASH snap_13528 +#define SIGNATURE_HASH snap_46130 #define specs_s_size 12 #define spi_device_e_auto_enum 0="SPI_NONE",1="SPI_DEVICE_1",2="SPI_DEVICE_2",3="SPI_DEVICE_3",4="SPI_DEVICE_4" #define spi_device_e_SPI_DEVICE_1 1 @@ -1320,7 +1320,7 @@ #define ts_show_vbatt true #define ts_show_vr_threshold_2 true #define ts_show_vr_threshold_all true -#define TS_SIGNATURE "rusEFI 2023.01.18.all.snap_13528" +#define TS_SIGNATURE "rusEFI 2023.01.20.all.snap_46130" #define TS_SINGLE_WRITE_COMMAND 'W' #define TS_SINGLE_WRITE_COMMAND_char W #define TS_TEST_COMMAND 't' diff --git a/firmware/controllers/generated/signature_48way.h b/firmware/controllers/generated/signature_48way.h index 21e87cba24..8677cf3c15 100644 --- a/firmware/controllers/generated/signature_48way.h +++ b/firmware/controllers/generated/signature_48way.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_15511 -#define TS_SIGNATURE "rusEFI 2023.01.18.48way.snap_15511" +#define SIGNATURE_HASH snap_48253 +#define TS_SIGNATURE "rusEFI 2023.01.20.48way.snap_48253" diff --git a/firmware/controllers/generated/signature_all.h b/firmware/controllers/generated/signature_all.h index 72fdb9d5b2..c11693c254 100644 --- a/firmware/controllers/generated/signature_all.h +++ b/firmware/controllers/generated/signature_all.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_13528 -#define TS_SIGNATURE "rusEFI 2023.01.18.all.snap_13528" +#define SIGNATURE_HASH snap_46130 +#define TS_SIGNATURE "rusEFI 2023.01.20.all.snap_46130" diff --git a/firmware/controllers/generated/signature_alphax-2chan.h b/firmware/controllers/generated/signature_alphax-2chan.h index e65a226e0e..9beefdb212 100644 --- a/firmware/controllers/generated/signature_alphax-2chan.h +++ b/firmware/controllers/generated/signature_alphax-2chan.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_43444 -#define TS_SIGNATURE "rusEFI 2023.01.18.alphax-2chan.snap_43444" +#define SIGNATURE_HASH snap_10590 +#define TS_SIGNATURE "rusEFI 2023.01.20.alphax-2chan.snap_10590" diff --git a/firmware/controllers/generated/signature_alphax-4chan.h b/firmware/controllers/generated/signature_alphax-4chan.h index 63897f15d3..d591a3faeb 100644 --- a/firmware/controllers/generated/signature_alphax-4chan.h +++ b/firmware/controllers/generated/signature_alphax-4chan.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_9713 -#define TS_SIGNATURE "rusEFI 2023.01.18.alphax-4chan.snap_9713" +#define SIGNATURE_HASH snap_42267 +#define TS_SIGNATURE "rusEFI 2023.01.20.alphax-4chan.snap_42267" diff --git a/firmware/controllers/generated/signature_alphax-8chan.h b/firmware/controllers/generated/signature_alphax-8chan.h index 5d9f76551f..607e640de4 100644 --- a/firmware/controllers/generated/signature_alphax-8chan.h +++ b/firmware/controllers/generated/signature_alphax-8chan.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_43860 -#define TS_SIGNATURE "rusEFI 2023.01.18.alphax-8chan.snap_43860" +#define SIGNATURE_HASH snap_11198 +#define TS_SIGNATURE "rusEFI 2023.01.20.alphax-8chan.snap_11198" diff --git a/firmware/controllers/generated/signature_atlas.h b/firmware/controllers/generated/signature_atlas.h index 9b9f4dc1b0..8cefdbb05a 100644 --- a/firmware/controllers/generated/signature_atlas.h +++ b/firmware/controllers/generated/signature_atlas.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_49663 -#define TS_SIGNATURE "rusEFI 2023.01.18.atlas.snap_49663" +#define SIGNATURE_HASH snap_16661 +#define TS_SIGNATURE "rusEFI 2023.01.20.atlas.snap_16661" diff --git a/firmware/controllers/generated/signature_core8.h b/firmware/controllers/generated/signature_core8.h index 099e1a8ec3..b10d371467 100644 --- a/firmware/controllers/generated/signature_core8.h +++ b/firmware/controllers/generated/signature_core8.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_25889 -#define TS_SIGNATURE "rusEFI 2023.01.18.core8.snap_25889" +#define SIGNATURE_HASH snap_58827 +#define TS_SIGNATURE "rusEFI 2023.01.20.core8.snap_58827" diff --git a/firmware/controllers/generated/signature_cypress.h b/firmware/controllers/generated/signature_cypress.h index 1b87354d1e..3d7dbccdd0 100644 --- a/firmware/controllers/generated/signature_cypress.h +++ b/firmware/controllers/generated/signature_cypress.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat by SignatureConsumer // -#define SIGNATURE_HASH snap_13528 -#define TS_SIGNATURE "rusEFI 2023.01.18.cypress.snap_13528" +#define SIGNATURE_HASH snap_46130 +#define TS_SIGNATURE "rusEFI 2023.01.20.cypress.snap_46130" diff --git a/firmware/controllers/generated/signature_f407-discovery.h b/firmware/controllers/generated/signature_f407-discovery.h index 8c315b0101..1d460b155e 100644 --- a/firmware/controllers/generated/signature_f407-discovery.h +++ b/firmware/controllers/generated/signature_f407-discovery.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_13528 -#define TS_SIGNATURE "rusEFI 2023.01.18.f407-discovery.snap_13528" +#define SIGNATURE_HASH snap_46130 +#define TS_SIGNATURE "rusEFI 2023.01.20.f407-discovery.snap_46130" diff --git a/firmware/controllers/generated/signature_f429-discovery.h b/firmware/controllers/generated/signature_f429-discovery.h index cbeee270c8..a4631c1ebe 100644 --- a/firmware/controllers/generated/signature_f429-discovery.h +++ b/firmware/controllers/generated/signature_f429-discovery.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_13528 -#define TS_SIGNATURE "rusEFI 2023.01.18.f429-discovery.snap_13528" +#define SIGNATURE_HASH snap_46130 +#define TS_SIGNATURE "rusEFI 2023.01.20.f429-discovery.snap_46130" diff --git a/firmware/controllers/generated/signature_frankenso_na6.h b/firmware/controllers/generated/signature_frankenso_na6.h index 51d0d2a8c6..2046603191 100644 --- a/firmware/controllers/generated/signature_frankenso_na6.h +++ b/firmware/controllers/generated/signature_frankenso_na6.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_51228 -#define TS_SIGNATURE "rusEFI 2023.01.18.frankenso_na6.snap_51228" +#define SIGNATURE_HASH snap_18678 +#define TS_SIGNATURE "rusEFI 2023.01.20.frankenso_na6.snap_18678" diff --git a/firmware/controllers/generated/signature_harley81.h b/firmware/controllers/generated/signature_harley81.h index c74ed3ffec..0139345436 100644 --- a/firmware/controllers/generated/signature_harley81.h +++ b/firmware/controllers/generated/signature_harley81.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_29223 -#define TS_SIGNATURE "rusEFI 2023.01.18.harley81.snap_29223" +#define SIGNATURE_HASH snap_62157 +#define TS_SIGNATURE "rusEFI 2023.01.20.harley81.snap_62157" diff --git a/firmware/controllers/generated/signature_hellen-gm-e67.h b/firmware/controllers/generated/signature_hellen-gm-e67.h index c17560a744..45ae51ab6a 100644 --- a/firmware/controllers/generated/signature_hellen-gm-e67.h +++ b/firmware/controllers/generated/signature_hellen-gm-e67.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_22492 -#define TS_SIGNATURE "rusEFI 2023.01.18.hellen-gm-e67.snap_22492" +#define SIGNATURE_HASH snap_55094 +#define TS_SIGNATURE "rusEFI 2023.01.20.hellen-gm-e67.snap_55094" diff --git a/firmware/controllers/generated/signature_hellen-nb1.h b/firmware/controllers/generated/signature_hellen-nb1.h index 7f1003eadf..5b4cd79d4f 100644 --- a/firmware/controllers/generated/signature_hellen-nb1.h +++ b/firmware/controllers/generated/signature_hellen-nb1.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_1300 -#define TS_SIGNATURE "rusEFI 2023.01.18.hellen-nb1.snap_1300" +#define SIGNATURE_HASH snap_34302 +#define TS_SIGNATURE "rusEFI 2023.01.20.hellen-nb1.snap_34302" diff --git a/firmware/controllers/generated/signature_hellen121nissan.h b/firmware/controllers/generated/signature_hellen121nissan.h index 28e12fe8b1..550863b1c4 100644 --- a/firmware/controllers/generated/signature_hellen121nissan.h +++ b/firmware/controllers/generated/signature_hellen121nissan.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_51530 -#define TS_SIGNATURE "rusEFI 2023.01.18.hellen121nissan.snap_51530" +#define SIGNATURE_HASH snap_18848 +#define TS_SIGNATURE "rusEFI 2023.01.20.hellen121nissan.snap_18848" diff --git a/firmware/controllers/generated/signature_hellen121vag.h b/firmware/controllers/generated/signature_hellen121vag.h index b12aed3eae..75c4f044dc 100644 --- a/firmware/controllers/generated/signature_hellen121vag.h +++ b/firmware/controllers/generated/signature_hellen121vag.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_41925 -#define TS_SIGNATURE "rusEFI 2023.01.18.hellen121vag.snap_41925" +#define SIGNATURE_HASH snap_9007 +#define TS_SIGNATURE "rusEFI 2023.01.20.hellen121vag.snap_9007" diff --git a/firmware/controllers/generated/signature_hellen128.h b/firmware/controllers/generated/signature_hellen128.h index 4ce8fed1a4..a32a681ae7 100644 --- a/firmware/controllers/generated/signature_hellen128.h +++ b/firmware/controllers/generated/signature_hellen128.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_18915 -#define TS_SIGNATURE "rusEFI 2023.01.18.hellen128.snap_18915" +#define SIGNATURE_HASH snap_51465 +#define TS_SIGNATURE "rusEFI 2023.01.20.hellen128.snap_51465" diff --git a/firmware/controllers/generated/signature_hellen154hyundai.h b/firmware/controllers/generated/signature_hellen154hyundai.h index 23a555cdf5..426f065302 100644 --- a/firmware/controllers/generated/signature_hellen154hyundai.h +++ b/firmware/controllers/generated/signature_hellen154hyundai.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_3643 -#define TS_SIGNATURE "rusEFI 2023.01.18.hellen154hyundai.snap_3643" +#define SIGNATURE_HASH snap_36561 +#define TS_SIGNATURE "rusEFI 2023.01.20.hellen154hyundai.snap_36561" diff --git a/firmware/controllers/generated/signature_hellen72.h b/firmware/controllers/generated/signature_hellen72.h index e8c26d3ad9..d19265ef79 100644 --- a/firmware/controllers/generated/signature_hellen72.h +++ b/firmware/controllers/generated/signature_hellen72.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_14931 -#define TS_SIGNATURE "rusEFI 2023.01.18.hellen72.snap_14931" +#define SIGNATURE_HASH snap_47801 +#define TS_SIGNATURE "rusEFI 2023.01.20.hellen72.snap_47801" diff --git a/firmware/controllers/generated/signature_hellen81.h b/firmware/controllers/generated/signature_hellen81.h index 96e885e5a3..de203e007a 100644 --- a/firmware/controllers/generated/signature_hellen81.h +++ b/firmware/controllers/generated/signature_hellen81.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_43685 -#define TS_SIGNATURE "rusEFI 2023.01.18.hellen81.snap_43685" +#define SIGNATURE_HASH snap_10831 +#define TS_SIGNATURE "rusEFI 2023.01.20.hellen81.snap_10831" diff --git a/firmware/controllers/generated/signature_hellen88bmw.h b/firmware/controllers/generated/signature_hellen88bmw.h index d1a89cfcef..fba015945e 100644 --- a/firmware/controllers/generated/signature_hellen88bmw.h +++ b/firmware/controllers/generated/signature_hellen88bmw.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_10004 -#define TS_SIGNATURE "rusEFI 2023.01.18.hellen88bmw.snap_10004" +#define SIGNATURE_HASH snap_43006 +#define TS_SIGNATURE "rusEFI 2023.01.20.hellen88bmw.snap_43006" diff --git a/firmware/controllers/generated/signature_hellenNA6.h b/firmware/controllers/generated/signature_hellenNA6.h index e08dde6590..fcba46af7a 100644 --- a/firmware/controllers/generated/signature_hellenNA6.h +++ b/firmware/controllers/generated/signature_hellenNA6.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_34287 -#define TS_SIGNATURE "rusEFI 2023.01.18.hellenNA6.snap_34287" +#define SIGNATURE_HASH snap_1285 +#define TS_SIGNATURE "rusEFI 2023.01.20.hellenNA6.snap_1285" diff --git a/firmware/controllers/generated/signature_hellenNA8_96.h b/firmware/controllers/generated/signature_hellenNA8_96.h index bbfa241313..fdaef09737 100644 --- a/firmware/controllers/generated/signature_hellenNA8_96.h +++ b/firmware/controllers/generated/signature_hellenNA8_96.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_34096 -#define TS_SIGNATURE "rusEFI 2023.01.18.hellenNA8_96.snap_34096" +#define SIGNATURE_HASH snap_1498 +#define TS_SIGNATURE "rusEFI 2023.01.20.hellenNA8_96.snap_1498" diff --git a/firmware/controllers/generated/signature_kin.h b/firmware/controllers/generated/signature_kin.h index ac9f0a6d54..37b5e91305 100644 --- a/firmware/controllers/generated/signature_kin.h +++ b/firmware/controllers/generated/signature_kin.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat by SignatureConsumer // -#define SIGNATURE_HASH snap_38420 -#define TS_SIGNATURE "rusEFI 2023.01.18.kin.snap_38420" +#define SIGNATURE_HASH snap_5886 +#define TS_SIGNATURE "rusEFI 2023.01.20.kin.snap_5886" diff --git a/firmware/controllers/generated/signature_m74_9.h b/firmware/controllers/generated/signature_m74_9.h index d5b101a8eb..9f95646027 100644 --- a/firmware/controllers/generated/signature_m74_9.h +++ b/firmware/controllers/generated/signature_m74_9.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_59875 -#define TS_SIGNATURE "rusEFI 2023.01.18.m74_9.snap_59875" +#define SIGNATURE_HASH snap_26889 +#define TS_SIGNATURE "rusEFI 2023.01.20.m74_9.snap_26889" diff --git a/firmware/controllers/generated/signature_mre_f4.h b/firmware/controllers/generated/signature_mre_f4.h index 4f6c511e62..e1d3c652ea 100644 --- a/firmware/controllers/generated/signature_mre_f4.h +++ b/firmware/controllers/generated/signature_mre_f4.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_21464 -#define TS_SIGNATURE "rusEFI 2023.01.18.mre_f4.snap_21464" +#define SIGNATURE_HASH snap_54066 +#define TS_SIGNATURE "rusEFI 2023.01.20.mre_f4.snap_54066" diff --git a/firmware/controllers/generated/signature_mre_f7.h b/firmware/controllers/generated/signature_mre_f7.h index 32d9d43d23..38c8981b63 100644 --- a/firmware/controllers/generated/signature_mre_f7.h +++ b/firmware/controllers/generated/signature_mre_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_21464 -#define TS_SIGNATURE "rusEFI 2023.01.18.mre_f7.snap_21464" +#define SIGNATURE_HASH snap_54066 +#define TS_SIGNATURE "rusEFI 2023.01.20.mre_f7.snap_54066" diff --git a/firmware/controllers/generated/signature_prometheus_405.h b/firmware/controllers/generated/signature_prometheus_405.h index 5ab0b821f0..a713fae79d 100644 --- a/firmware/controllers/generated/signature_prometheus_405.h +++ b/firmware/controllers/generated/signature_prometheus_405.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_60734 -#define TS_SIGNATURE "rusEFI 2023.01.18.prometheus_405.snap_60734" +#define SIGNATURE_HASH snap_28116 +#define TS_SIGNATURE "rusEFI 2023.01.20.prometheus_405.snap_28116" diff --git a/firmware/controllers/generated/signature_prometheus_469.h b/firmware/controllers/generated/signature_prometheus_469.h index 25593f751d..66b66201f4 100644 --- a/firmware/controllers/generated/signature_prometheus_469.h +++ b/firmware/controllers/generated/signature_prometheus_469.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_60734 -#define TS_SIGNATURE "rusEFI 2023.01.18.prometheus_469.snap_60734" +#define SIGNATURE_HASH snap_28116 +#define TS_SIGNATURE "rusEFI 2023.01.20.prometheus_469.snap_28116" diff --git a/firmware/controllers/generated/signature_proteus_f4.h b/firmware/controllers/generated/signature_proteus_f4.h index ab13cbdfec..45b144f585 100644 --- a/firmware/controllers/generated/signature_proteus_f4.h +++ b/firmware/controllers/generated/signature_proteus_f4.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_65384 -#define TS_SIGNATURE "rusEFI 2023.01.18.proteus_f4.snap_65384" +#define SIGNATURE_HASH snap_32642 +#define TS_SIGNATURE "rusEFI 2023.01.20.proteus_f4.snap_32642" diff --git a/firmware/controllers/generated/signature_proteus_f7.h b/firmware/controllers/generated/signature_proteus_f7.h index 5c1a778877..769c6272c9 100644 --- a/firmware/controllers/generated/signature_proteus_f7.h +++ b/firmware/controllers/generated/signature_proteus_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_65384 -#define TS_SIGNATURE "rusEFI 2023.01.18.proteus_f7.snap_65384" +#define SIGNATURE_HASH snap_32642 +#define TS_SIGNATURE "rusEFI 2023.01.20.proteus_f7.snap_32642" diff --git a/firmware/controllers/generated/signature_proteus_h7.h b/firmware/controllers/generated/signature_proteus_h7.h index c376f87ba4..3fa6466f80 100644 --- a/firmware/controllers/generated/signature_proteus_h7.h +++ b/firmware/controllers/generated/signature_proteus_h7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_65384 -#define TS_SIGNATURE "rusEFI 2023.01.18.proteus_h7.snap_65384" +#define SIGNATURE_HASH snap_32642 +#define TS_SIGNATURE "rusEFI 2023.01.20.proteus_h7.snap_32642" diff --git a/firmware/controllers/generated/signature_s105.h b/firmware/controllers/generated/signature_s105.h index 16ba20b584..5ced4337b3 100644 --- a/firmware/controllers/generated/signature_s105.h +++ b/firmware/controllers/generated/signature_s105.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_38687 -#define TS_SIGNATURE "rusEFI 2023.01.18.s105.snap_38687" +#define SIGNATURE_HASH snap_6133 +#define TS_SIGNATURE "rusEFI 2023.01.20.s105.snap_6133" diff --git a/firmware/controllers/generated/signature_subaru_eg33_f7.h b/firmware/controllers/generated/signature_subaru_eg33_f7.h index 125b38efa6..b192420b71 100644 --- a/firmware/controllers/generated/signature_subaru_eg33_f7.h +++ b/firmware/controllers/generated/signature_subaru_eg33_f7.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_60674 -#define TS_SIGNATURE "rusEFI 2023.01.18.subaru_eg33_f7.snap_60674" +#define SIGNATURE_HASH snap_28136 +#define TS_SIGNATURE "rusEFI 2023.01.20.subaru_eg33_f7.snap_28136" diff --git a/firmware/controllers/generated/signature_tdg-pdm8.h b/firmware/controllers/generated/signature_tdg-pdm8.h index fcc0f193eb..02ce45e36f 100644 --- a/firmware/controllers/generated/signature_tdg-pdm8.h +++ b/firmware/controllers/generated/signature_tdg-pdm8.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh by SignatureConsumer // -#define SIGNATURE_HASH snap_64140 -#define TS_SIGNATURE "rusEFI 2023.01.18.tdg-pdm8.snap_64140" +#define SIGNATURE_HASH snap_31334 +#define TS_SIGNATURE "rusEFI 2023.01.20.tdg-pdm8.snap_31334" diff --git a/firmware/tunerstudio/generated/rusefi.ini b/firmware/tunerstudio/generated/rusefi.ini index d8407c9db3..11e2985088 100644 --- a/firmware/tunerstudio/generated/rusefi.ini +++ b/firmware/tunerstudio/generated/rusefi.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2023.01.18.all.snap_13528" + signature = "rusEFI 2023.01.20.all.snap_46130" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2023.01.18.all.snap_13528" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2023.01.20.all.snap_46130" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:15:21 UTC 2023 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:22 UTC 2023 pageSize = 22368 page = 1 @@ -4089,6 +4089,11 @@ gaugeCategory = VVT vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0 + gaugeCategory = Ignition sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/firmware/tunerstudio/generated/rusefi_48way.ini b/firmware/tunerstudio/generated/rusefi_48way.ini index 37e357f19f..eff3ba56de 100644 --- a/firmware/tunerstudio/generated/rusefi_48way.ini +++ b/firmware/tunerstudio/generated/rusefi_48way.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2023.01.18.48way.snap_15511" + signature = "rusEFI 2023.01.20.48way.snap_48253" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2023.01.18.48way.snap_15511" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2023.01.20.48way.snap_48253" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:15:01 UTC 2023 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:06 UTC 2023 pageSize = 22368 page = 1 @@ -4089,6 +4089,11 @@ gaugeCategory = VVT vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0 + gaugeCategory = Ignition sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini b/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini index b90322b707..cff25e0ea3 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2023.01.18.alphax-2chan.snap_43444" + signature = "rusEFI 2023.01.20.alphax-2chan.snap_10590" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2023.01.18.alphax-2chan.snap_43444" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2023.01.20.alphax-2chan.snap_10590" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:32 UTC 2023 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:50:42 UTC 2023 pageSize = 22368 page = 1 @@ -4089,6 +4089,11 @@ gaugeCategory = VVT vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0 + gaugeCategory = Ignition sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini b/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini index 54381e0be2..9634db8398 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2023.01.18.alphax-4chan.snap_9713" + signature = "rusEFI 2023.01.20.alphax-4chan.snap_42267" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2023.01.18.alphax-4chan.snap_9713" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2023.01.20.alphax-4chan.snap_42267" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:33 UTC 2023 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:50:43 UTC 2023 pageSize = 22368 page = 1 @@ -4089,6 +4089,11 @@ gaugeCategory = VVT vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0 + gaugeCategory = Ignition sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/firmware/tunerstudio/generated/rusefi_alphax-8chan.ini b/firmware/tunerstudio/generated/rusefi_alphax-8chan.ini index 9a0af06943..73e5b66df2 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-8chan.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-8chan.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2023.01.18.alphax-8chan.snap_43860" + signature = "rusEFI 2023.01.20.alphax-8chan.snap_11198" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2023.01.18.alphax-8chan.snap_43860" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2023.01.20.alphax-8chan.snap_11198" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:35 UTC 2023 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:50:44 UTC 2023 pageSize = 22368 page = 1 @@ -4089,6 +4089,11 @@ gaugeCategory = VVT vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0 + gaugeCategory = Ignition sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/firmware/tunerstudio/generated/rusefi_atlas.ini b/firmware/tunerstudio/generated/rusefi_atlas.ini index 639023b28e..9a740dbe18 100644 --- a/firmware/tunerstudio/generated/rusefi_atlas.ini +++ b/firmware/tunerstudio/generated/rusefi_atlas.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2023.01.18.atlas.snap_49663" + signature = "rusEFI 2023.01.20.atlas.snap_16661" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2023.01.18.atlas.snap_49663" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2023.01.20.atlas.snap_16661" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:15:18 UTC 2023 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:20 UTC 2023 pageSize = 22368 page = 1 @@ -4089,6 +4089,11 @@ gaugeCategory = VVT vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0 + gaugeCategory = Ignition sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/firmware/tunerstudio/generated/rusefi_core8.ini b/firmware/tunerstudio/generated/rusefi_core8.ini index f4b677071f..ce69b290ff 100644 --- a/firmware/tunerstudio/generated/rusefi_core8.ini +++ b/firmware/tunerstudio/generated/rusefi_core8.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2023.01.18.core8.snap_25889" + signature = "rusEFI 2023.01.20.core8.snap_58827" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2023.01.18.core8.snap_25889" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2023.01.20.core8.snap_58827" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:59 UTC 2023 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:05 UTC 2023 pageSize = 22368 page = 1 @@ -4089,6 +4089,11 @@ gaugeCategory = VVT vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0 + gaugeCategory = Ignition sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/firmware/tunerstudio/generated/rusefi_cypress.ini b/firmware/tunerstudio/generated/rusefi_cypress.ini index 0da1be2ca6..c0340f4a72 100644 --- a/firmware/tunerstudio/generated/rusefi_cypress.ini +++ b/firmware/tunerstudio/generated/rusefi_cypress.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2023.01.18.cypress.snap_13528" + signature = "rusEFI 2023.01.20.cypress.snap_46130" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2023.01.18.cypress.snap_13528" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2023.01.20.cypress.snap_46130" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Wed Jan 18 04:14:29 UTC 2023 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Fri Jan 20 01:50:40 UTC 2023 pageSize = 22368 page = 1 @@ -4089,6 +4089,11 @@ gaugeCategory = VVT vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0 + gaugeCategory = Ignition sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/firmware/tunerstudio/generated/rusefi_f407-discovery.ini b/firmware/tunerstudio/generated/rusefi_f407-discovery.ini index 83c2e505ab..16879698e7 100644 --- a/firmware/tunerstudio/generated/rusefi_f407-discovery.ini +++ b/firmware/tunerstudio/generated/rusefi_f407-discovery.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2023.01.18.f407-discovery.snap_13528" + signature = "rusEFI 2023.01.20.f407-discovery.snap_46130" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2023.01.18.f407-discovery.snap_13528" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2023.01.20.f407-discovery.snap_46130" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:15:15 UTC 2023 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:17 UTC 2023 pageSize = 22368 page = 1 @@ -4089,6 +4089,11 @@ gaugeCategory = VVT vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0 + gaugeCategory = Ignition sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/firmware/tunerstudio/generated/rusefi_f429-discovery.ini b/firmware/tunerstudio/generated/rusefi_f429-discovery.ini index 5fd42be9f0..ae1e7c1471 100644 --- a/firmware/tunerstudio/generated/rusefi_f429-discovery.ini +++ b/firmware/tunerstudio/generated/rusefi_f429-discovery.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2023.01.18.f429-discovery.snap_13528" + signature = "rusEFI 2023.01.20.f429-discovery.snap_46130" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2023.01.18.f429-discovery.snap_13528" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2023.01.20.f429-discovery.snap_46130" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:15:16 UTC 2023 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:18 UTC 2023 pageSize = 22368 page = 1 @@ -4089,6 +4089,11 @@ gaugeCategory = VVT vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0 + gaugeCategory = Ignition sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini b/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini index ccdce5f02b..0b3dfc8dba 100644 --- a/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini +++ b/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2023.01.18.frankenso_na6.snap_51228" + signature = "rusEFI 2023.01.20.frankenso_na6.snap_18678" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2023.01.18.frankenso_na6.snap_51228" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2023.01.20.frankenso_na6.snap_18678" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:15:05 UTC 2023 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:10 UTC 2023 pageSize = 22368 page = 1 @@ -4089,6 +4089,11 @@ gaugeCategory = VVT vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0 + gaugeCategory = Ignition sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/firmware/tunerstudio/generated/rusefi_harley81.ini b/firmware/tunerstudio/generated/rusefi_harley81.ini index 76d07ae691..db03eca584 100644 --- a/firmware/tunerstudio/generated/rusefi_harley81.ini +++ b/firmware/tunerstudio/generated/rusefi_harley81.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2023.01.18.harley81.snap_29223" + signature = "rusEFI 2023.01.20.harley81.snap_62157" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2023.01.18.harley81.snap_29223" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2023.01.20.harley81.snap_62157" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:36 UTC 2023 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:50:46 UTC 2023 pageSize = 22368 page = 1 @@ -4089,6 +4089,11 @@ gaugeCategory = VVT vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0 + gaugeCategory = Ignition sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini b/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini index 7cd1ff8be6..ceb35212b8 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2023.01.18.hellen-gm-e67.snap_22492" + signature = "rusEFI 2023.01.20.hellen-gm-e67.snap_55094" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2023.01.18.hellen-gm-e67.snap_22492" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2023.01.20.hellen-gm-e67.snap_55094" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:51 UTC 2023 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:50:57 UTC 2023 pageSize = 22368 page = 1 @@ -4089,6 +4089,11 @@ gaugeCategory = VVT vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0 + gaugeCategory = Ignition sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini b/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini index b1204228ba..cb305ffb6f 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2023.01.18.hellen-nb1.snap_1300" + signature = "rusEFI 2023.01.20.hellen-nb1.snap_34302" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2023.01.18.hellen-nb1.snap_1300" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2023.01.20.hellen-nb1.snap_34302" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:49 UTC 2023 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:50:56 UTC 2023 pageSize = 22368 page = 1 @@ -4089,6 +4089,11 @@ gaugeCategory = VVT vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0 + gaugeCategory = Ignition sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini b/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini index 6e04bd0355..f88341bce3 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2023.01.18.hellen121nissan.snap_51530" + signature = "rusEFI 2023.01.20.hellen121nissan.snap_18848" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2023.01.18.hellen121nissan.snap_51530" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2023.01.20.hellen121nissan.snap_18848" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:41 UTC 2023 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:50:50 UTC 2023 pageSize = 22368 page = 1 @@ -4089,6 +4089,11 @@ gaugeCategory = VVT vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0 + gaugeCategory = Ignition sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/firmware/tunerstudio/generated/rusefi_hellen121vag.ini b/firmware/tunerstudio/generated/rusefi_hellen121vag.ini index 7271f955dc..170c2ebf70 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen121vag.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen121vag.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2023.01.18.hellen121vag.snap_41925" + signature = "rusEFI 2023.01.20.hellen121vag.snap_9007" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2023.01.18.hellen121vag.snap_41925" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2023.01.20.hellen121vag.snap_9007" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:40 UTC 2023 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:50:48 UTC 2023 pageSize = 22368 page = 1 @@ -4089,6 +4089,11 @@ gaugeCategory = VVT vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0 + gaugeCategory = Ignition sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini b/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini index 9c13df149b..0a39b62b1c 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2023.01.18.hellen128.snap_18915" + signature = "rusEFI 2023.01.20.hellen128.snap_51465" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2023.01.18.hellen128.snap_18915" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2023.01.20.hellen128.snap_51465" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:38 UTC 2023 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:50:47 UTC 2023 pageSize = 22368 page = 1 @@ -4089,6 +4089,11 @@ gaugeCategory = VVT vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0 + gaugeCategory = Ignition sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini b/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini index a07e299080..a6116be8a0 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2023.01.18.hellen154hyundai.snap_3643" + signature = "rusEFI 2023.01.20.hellen154hyundai.snap_36561" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2023.01.18.hellen154hyundai.snap_3643" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2023.01.20.hellen154hyundai.snap_36561" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:43 UTC 2023 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:50:51 UTC 2023 pageSize = 22368 page = 1 @@ -4089,6 +4089,11 @@ gaugeCategory = VVT vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0 + gaugeCategory = Ignition sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/firmware/tunerstudio/generated/rusefi_hellen72.ini b/firmware/tunerstudio/generated/rusefi_hellen72.ini index f41860304a..48eaa3b712 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen72.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen72.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2023.01.18.hellen72.snap_14931" + signature = "rusEFI 2023.01.20.hellen72.snap_47801" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2023.01.18.hellen72.snap_14931" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2023.01.20.hellen72.snap_47801" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:46 UTC 2023 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:50:54 UTC 2023 pageSize = 22368 page = 1 @@ -4089,6 +4089,11 @@ gaugeCategory = VVT vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0 + gaugeCategory = Ignition sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/firmware/tunerstudio/generated/rusefi_hellen81.ini b/firmware/tunerstudio/generated/rusefi_hellen81.ini index 9f3878dec4..b9bde98355 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen81.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen81.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2023.01.18.hellen81.snap_43685" + signature = "rusEFI 2023.01.20.hellen81.snap_10831" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2023.01.18.hellen81.snap_43685" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2023.01.20.hellen81.snap_10831" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:48 UTC 2023 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:50:55 UTC 2023 pageSize = 22368 page = 1 @@ -4089,6 +4089,11 @@ gaugeCategory = VVT vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0 + gaugeCategory = Ignition sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini b/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini index 5fc5c3cf44..f9c1b4c6aa 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2023.01.18.hellen88bmw.snap_10004" + signature = "rusEFI 2023.01.20.hellen88bmw.snap_43006" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2023.01.18.hellen88bmw.snap_10004" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2023.01.20.hellen88bmw.snap_43006" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:44 UTC 2023 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:50:52 UTC 2023 pageSize = 22368 page = 1 @@ -4089,6 +4089,11 @@ gaugeCategory = VVT vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0 + gaugeCategory = Ignition sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/firmware/tunerstudio/generated/rusefi_hellenNA6.ini b/firmware/tunerstudio/generated/rusefi_hellenNA6.ini index db0798f85f..13af2a3c24 100644 --- a/firmware/tunerstudio/generated/rusefi_hellenNA6.ini +++ b/firmware/tunerstudio/generated/rusefi_hellenNA6.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2023.01.18.hellenNA6.snap_34287" + signature = "rusEFI 2023.01.20.hellenNA6.snap_1285" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2023.01.18.hellenNA6.snap_34287" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2023.01.20.hellenNA6.snap_1285" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:52 UTC 2023 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:50:59 UTC 2023 pageSize = 22368 page = 1 @@ -4089,6 +4089,11 @@ gaugeCategory = VVT vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0 + gaugeCategory = Ignition sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini b/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini index 9cd329ec0e..46b31207b4 100644 --- a/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini +++ b/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2023.01.18.hellenNA8_96.snap_34096" + signature = "rusEFI 2023.01.20.hellenNA8_96.snap_1498" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2023.01.18.hellenNA8_96.snap_34096" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2023.01.20.hellenNA8_96.snap_1498" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:54 UTC 2023 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:01 UTC 2023 pageSize = 22368 page = 1 @@ -4089,6 +4089,11 @@ gaugeCategory = VVT vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0 + gaugeCategory = Ignition sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/firmware/tunerstudio/generated/rusefi_kin.ini b/firmware/tunerstudio/generated/rusefi_kin.ini index dd89891ad0..e9ec4555f2 100644 --- a/firmware/tunerstudio/generated/rusefi_kin.ini +++ b/firmware/tunerstudio/generated/rusefi_kin.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2023.01.18.kin.snap_38420" + signature = "rusEFI 2023.01.20.kin.snap_5886" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2023.01.18.kin.snap_38420" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2023.01.20.kin.snap_5886" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Wed Jan 18 04:14:28 UTC 2023 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Fri Jan 20 01:50:39 UTC 2023 pageSize = 22368 page = 1 @@ -4089,6 +4089,11 @@ gaugeCategory = VVT vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0 + gaugeCategory = Ignition sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/firmware/tunerstudio/generated/rusefi_m74_9.ini b/firmware/tunerstudio/generated/rusefi_m74_9.ini index daf6c21a85..c0e3e29d72 100644 --- a/firmware/tunerstudio/generated/rusefi_m74_9.ini +++ b/firmware/tunerstudio/generated/rusefi_m74_9.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2023.01.18.m74_9.snap_59875" + signature = "rusEFI 2023.01.20.m74_9.snap_26889" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2023.01.18.m74_9.snap_59875" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2023.01.20.m74_9.snap_26889" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:15:02 UTC 2023 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:07 UTC 2023 pageSize = 22368 page = 1 @@ -4089,6 +4089,11 @@ gaugeCategory = VVT vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0 + gaugeCategory = Ignition sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/firmware/tunerstudio/generated/rusefi_mre_f4.ini b/firmware/tunerstudio/generated/rusefi_mre_f4.ini index 0c751a6649..3659acc7e3 100644 --- a/firmware/tunerstudio/generated/rusefi_mre_f4.ini +++ b/firmware/tunerstudio/generated/rusefi_mre_f4.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2023.01.18.mre_f4.snap_21464" + signature = "rusEFI 2023.01.20.mre_f4.snap_54066" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2023.01.18.mre_f4.snap_21464" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2023.01.20.mre_f4.snap_54066" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:57 UTC 2023 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:03 UTC 2023 pageSize = 22368 page = 1 @@ -4089,6 +4089,11 @@ gaugeCategory = VVT vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0 + gaugeCategory = Ignition sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/firmware/tunerstudio/generated/rusefi_mre_f7.ini b/firmware/tunerstudio/generated/rusefi_mre_f7.ini index d44fa8488e..6a726785c2 100644 --- a/firmware/tunerstudio/generated/rusefi_mre_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_mre_f7.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2023.01.18.mre_f7.snap_21464" + signature = "rusEFI 2023.01.20.mre_f7.snap_54066" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2023.01.18.mre_f7.snap_21464" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2023.01.20.mre_f7.snap_54066" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:56 UTC 2023 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:02 UTC 2023 pageSize = 22368 page = 1 @@ -4089,6 +4089,11 @@ gaugeCategory = VVT vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0 + gaugeCategory = Ignition sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/firmware/tunerstudio/generated/rusefi_prometheus_405.ini b/firmware/tunerstudio/generated/rusefi_prometheus_405.ini index f49026de4a..071d9a8956 100644 --- a/firmware/tunerstudio/generated/rusefi_prometheus_405.ini +++ b/firmware/tunerstudio/generated/rusefi_prometheus_405.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2023.01.18.prometheus_405.snap_60734" + signature = "rusEFI 2023.01.20.prometheus_405.snap_28116" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2023.01.18.prometheus_405.snap_60734" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2023.01.20.prometheus_405.snap_28116" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:15:08 UTC 2023 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:12 UTC 2023 pageSize = 22368 page = 1 @@ -4089,6 +4089,11 @@ gaugeCategory = VVT vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0 + gaugeCategory = Ignition sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/firmware/tunerstudio/generated/rusefi_prometheus_469.ini b/firmware/tunerstudio/generated/rusefi_prometheus_469.ini index f364602be5..df7a8e8a2d 100644 --- a/firmware/tunerstudio/generated/rusefi_prometheus_469.ini +++ b/firmware/tunerstudio/generated/rusefi_prometheus_469.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2023.01.18.prometheus_469.snap_60734" + signature = "rusEFI 2023.01.20.prometheus_469.snap_28116" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2023.01.18.prometheus_469.snap_60734" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2023.01.20.prometheus_469.snap_28116" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:15:07 UTC 2023 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:11 UTC 2023 pageSize = 22368 page = 1 @@ -4089,6 +4089,11 @@ gaugeCategory = VVT vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0 + gaugeCategory = Ignition sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/firmware/tunerstudio/generated/rusefi_proteus_f4.ini b/firmware/tunerstudio/generated/rusefi_proteus_f4.ini index 3091c93d25..c6b4b8fbf1 100644 --- a/firmware/tunerstudio/generated/rusefi_proteus_f4.ini +++ b/firmware/tunerstudio/generated/rusefi_proteus_f4.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2023.01.18.proteus_f4.snap_65384" + signature = "rusEFI 2023.01.20.proteus_f4.snap_32642" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2023.01.18.proteus_f4.snap_65384" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2023.01.20.proteus_f4.snap_32642" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:15:12 UTC 2023 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:15 UTC 2023 pageSize = 26368 page = 1 @@ -4089,6 +4089,11 @@ gaugeCategory = VVT vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0 + gaugeCategory = Ignition sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/firmware/tunerstudio/generated/rusefi_proteus_f7.ini b/firmware/tunerstudio/generated/rusefi_proteus_f7.ini index 7c4d0e3e68..3660f82bf5 100644 --- a/firmware/tunerstudio/generated/rusefi_proteus_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_proteus_f7.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2023.01.18.proteus_f7.snap_65384" + signature = "rusEFI 2023.01.20.proteus_f7.snap_32642" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2023.01.18.proteus_f7.snap_65384" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2023.01.20.proteus_f7.snap_32642" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:15:10 UTC 2023 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:13 UTC 2023 pageSize = 26368 page = 1 @@ -4089,6 +4089,11 @@ gaugeCategory = VVT vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0 + gaugeCategory = Ignition sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/firmware/tunerstudio/generated/rusefi_proteus_h7.ini b/firmware/tunerstudio/generated/rusefi_proteus_h7.ini index ed28fb871d..38999ec1a1 100644 --- a/firmware/tunerstudio/generated/rusefi_proteus_h7.ini +++ b/firmware/tunerstudio/generated/rusefi_proteus_h7.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2023.01.18.proteus_h7.snap_65384" + signature = "rusEFI 2023.01.20.proteus_h7.snap_32642" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2023.01.18.proteus_h7.snap_65384" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2023.01.20.proteus_h7.snap_32642" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:15:13 UTC 2023 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:16 UTC 2023 pageSize = 26368 page = 1 @@ -4089,6 +4089,11 @@ gaugeCategory = VVT vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0 + gaugeCategory = Ignition sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/firmware/tunerstudio/generated/rusefi_s105.ini b/firmware/tunerstudio/generated/rusefi_s105.ini index 9faa8460e3..d8d3057cfc 100644 --- a/firmware/tunerstudio/generated/rusefi_s105.ini +++ b/firmware/tunerstudio/generated/rusefi_s105.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2023.01.18.s105.snap_38687" + signature = "rusEFI 2023.01.20.s105.snap_6133" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2023.01.18.s105.snap_38687" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2023.01.20.s105.snap_6133" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:15:04 UTC 2023 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:08 UTC 2023 pageSize = 22368 page = 1 @@ -4089,6 +4089,11 @@ gaugeCategory = VVT vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0 + gaugeCategory = Ignition sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini b/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini index f44867eaac..4d61c3f262 100644 --- a/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2023.01.18.subaru_eg33_f7.snap_60674" + signature = "rusEFI 2023.01.20.subaru_eg33_f7.snap_28136" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2023.01.18.subaru_eg33_f7.snap_60674" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2023.01.20.subaru_eg33_f7.snap_28136" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh integration/rusefi_config.txt Wed Jan 18 04:14:30 UTC 2023 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh integration/rusefi_config.txt Fri Jan 20 01:50:41 UTC 2023 pageSize = 22368 page = 1 @@ -4089,6 +4089,11 @@ gaugeCategory = VVT vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0 + gaugeCategory = Ignition sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini b/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini index bd9d2bcd4e..f850087582 100644 --- a/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini +++ b/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini @@ -33,12 +33,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2023.01.18.tdg-pdm8.snap_64140" + signature = "rusEFI 2023.01.20.tdg-pdm8.snap_31334" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature= "rusEFI 2023.01.18.tdg-pdm8.snap_64140" ; signature is expected to be 7 or more characters. + signature= "rusEFI 2023.01.20.tdg-pdm8.snap_31334" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -86,7 +86,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:15:19 UTC 2023 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:21 UTC 2023 pageSize = 22368 page = 1 @@ -4089,6 +4089,11 @@ gaugeCategory = VVT vvtTargets2Gauge = vvtTargets2, "VVT: bank 1 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets3Gauge = vvtTargets3, "VVT: bank 2 intake target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 vvtTargets4Gauge = vvtTargets4, "VVT: bank 2 exhaust target", "deg", -60, 60, -60, -60, 60, 60, 0, 0 + vvtOutput1Gauge = vvtStatus1_output, "vvt: output 1", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput2Gauge = vvtStatus2_output, "vvt: output 2", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput3Gauge = vvtStatus3_output, "vvt: output 3", "", 00, 100, -60, -60, 60, 60, 0, 0 + vvtOutput4Gauge = vvtStatus4_output, "vvt: output 4", "", 00, 100, -60, -60, 60, 60, 0, 0 + gaugeCategory = Ignition sparkCutReasonGauge = sparkCutReason,"Spark Cut Code", "code", 0.0,0.0, 0.0,0.0, 0.0,0.0, 0,0 diff --git a/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java b/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java index 06b56f3642..02f3ac16aa 100644 --- a/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java +++ b/java_console/models/src/main/java/com/rusefi/config/generated/Fields.java @@ -1,6 +1,6 @@ package com.rusefi.config.generated; -// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Wed Jan 18 04:15:24 UTC 2023 +// this file was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jan 20 01:51:23 UTC 2023 // by class com.rusefi.output.FileJavaFieldsConsumer import com.rusefi.config.*; @@ -1202,7 +1202,7 @@ public class Fields { public static final int TS_RESPONSE_UNDERRUN = 0x80; public static final int TS_RESPONSE_UNRECOGNIZED_COMMAND = 0x83; public static final char TS_SET_LOGGER_SWITCH = 'l'; - public static final String TS_SIGNATURE = "rusEFI 2023.01.18.all.snap_13528"; + public static final String TS_SIGNATURE = "rusEFI 2023.01.20.all.snap_46130"; public static final char TS_SINGLE_WRITE_COMMAND = 'W'; public static final char TS_TEST_COMMAND = 't'; public static final int TS_TOTAL_OUTPUT_SIZE = 1300;