diff --git a/firmware/console/binary/generated/data_logs.ini b/firmware/console/binary/generated/data_logs.ini index 6bfa75ab7b..62613a93fb 100644 --- a/firmware/console/binary/generated/data_logs.ini +++ b/firmware/console/binary/generated/data_logs.ini @@ -392,8 +392,8 @@ entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" entry = idleState, "idleState", int, "%d" -entry = currentIdlePosition, "that's current position with CLT and IAT corrections", float, "%.3f" -entry = baseIdlePosition, "current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)", float, "%.3f" +entry = currentIdlePosition, "idle: current position", float, "%.3f" +entry = baseIdlePosition, "idle: base value", float, "%.3f" entry = iacByTpsTaper, "iacByTpsTaper portion of idle", float, "%.3f" entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" diff --git a/firmware/console/binary/generated/sensors.java b/firmware/console/binary/generated/sensors.java index 98d5a287da..dec492b5b5 100644 --- a/firmware/console/binary/generated/sensors.java +++ b/firmware/console/binary/generated/sensors.java @@ -360,8 +360,8 @@ vvtStateIndex("vvtStateIndex", SensorCategory.SENSOR_INPUTS, FieldType.INT8, 923 wallFuelCorrection("fuel injection time correction to account for wall wetting effect for current cycle", SensorCategory.SENSOR_INPUTS, FieldType.INT, 924, 1.0, -1.0, -1.0, ""), wallFuel("Amount of fuel on the wall, in ms of injector open time for each injector.", SensorCategory.SENSOR_INPUTS, FieldType.INT, 928, 1.0, -1.0, -1.0, ""), idleState("idleState", SensorCategory.SENSOR_INPUTS, FieldType.INT, 932, 1.0, -1.0, -1.0, ""), -currentIdlePosition("that's current position with CLT and IAT corrections", SensorCategory.SENSOR_INPUTS, FieldType.INT, 936, 1.0, -1.0, -1.0, ""), -baseIdlePosition("current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)", SensorCategory.SENSOR_INPUTS, FieldType.INT, 940, 1.0, -1.0, -1.0, ""), +currentIdlePosition("idle: current position\nthat's current position with CLT and IAT corrections", SensorCategory.SENSOR_INPUTS, FieldType.INT, 936, 1.0, -1.0, -1.0, ""), +baseIdlePosition("idle: base value\ncurrent position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)", SensorCategory.SENSOR_INPUTS, FieldType.INT, 940, 1.0, -1.0, -1.0, ""), iacByTpsTaper("iacByTpsTaper portion of idle", SensorCategory.SENSOR_INPUTS, FieldType.INT, 944, 1.0, -1.0, -1.0, ""), throttlePedalUpState("true in IDLE throttle pedal state, false if driver is touching the pedal\ntodo: better name for this field?", SensorCategory.SENSOR_INPUTS, FieldType.INT, 948, 1.0, -1.0, -1.0, ""), targetRpmByClt("targetRpmByClt", SensorCategory.SENSOR_INPUTS, FieldType.INT, 956, 1.0, -1.0, -1.0, ""), diff --git a/firmware/controllers/actuators/idle_state_generated.h b/firmware/controllers/actuators/idle_state_generated.h index 67c6e2fd3b..3b49222dc9 100644 --- a/firmware/controllers/actuators/idle_state_generated.h +++ b/firmware/controllers/actuators/idle_state_generated.h @@ -1,4 +1,4 @@ -// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/actuators/idle_state.txt Sun Apr 17 20:27:25 UTC 2022 +// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/actuators/idle_state.txt Fri Jul 08 04:28:20 UTC 2022 // by class com.rusefi.output.CHeaderConsumer // begin #pragma once @@ -10,12 +10,14 @@ struct idle_state_s { */ idle_state_e idleState = (idle_state_e)0; /** - * that's current position with CLT and IAT corrections + * "idle: current position + * that's current position with CLT and IAT corrections" * offset 4 */ percent_t currentIdlePosition = (percent_t)0; /** - * current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration) + * "idle: base value + * current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)" * offset 8 */ percent_t baseIdlePosition = (percent_t)0; @@ -144,4 +146,4 @@ struct idle_state_s { static_assert(sizeof(idle_state_s) == 32); // end -// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/actuators/idle_state.txt Sun Apr 17 20:27:25 UTC 2022 +// this section was generated automatically by rusEFI tool ConfigDefinition.jar based on (unknown script) controllers/actuators/idle_state.txt Fri Jul 08 04:28:20 UTC 2022 diff --git a/firmware/controllers/generated/signature_hellen88bmw.h b/firmware/controllers/generated/signature_hellen88bmw.h index 4b821219c3..37ccc06bcb 100644 --- a/firmware/controllers/generated/signature_hellen88bmw.h +++ b/firmware/controllers/generated/signature_hellen88bmw.h @@ -2,5 +2,5 @@ // was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh null // -#define SIGNATURE_HASH 2538540918 -#define TS_SIGNATURE "rusEFI 2022.07.08.hellen88bmw.2538540918" +#define SIGNATURE_HASH 2464597267 +#define TS_SIGNATURE "rusEFI 2022.07.08.hellen88bmw.2464597267" diff --git a/firmware/tunerstudio/generated/rusefi.ini b/firmware/tunerstudio/generated/rusefi.ini index 9c78a74f0c..d0580120cc 100644 --- a/firmware/tunerstudio/generated/rusefi.ini +++ b/firmware/tunerstudio/generated/rusefi.ini @@ -85,7 +85,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 03:21:39 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 04:29:06 UTC 2022 pageSize = 21300 page = 1 @@ -4220,8 +4220,8 @@ entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" entry = idleState, "idleState", int, "%d" -entry = currentIdlePosition, "that's current position with CLT and IAT corrections", float, "%.3f" -entry = baseIdlePosition, "current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)", float, "%.3f" +entry = currentIdlePosition, "idle: current position", float, "%.3f" +entry = baseIdlePosition, "idle: base value", float, "%.3f" entry = iacByTpsTaper, "iacByTpsTaper portion of idle", float, "%.3f" entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_48way.ini b/firmware/tunerstudio/generated/rusefi_48way.ini index bcdd28cddf..11b3b67426 100644 --- a/firmware/tunerstudio/generated/rusefi_48way.ini +++ b/firmware/tunerstudio/generated/rusefi_48way.ini @@ -85,7 +85,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 03:21:21 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 04:28:48 UTC 2022 pageSize = 21300 page = 1 @@ -4220,8 +4220,8 @@ entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" entry = idleState, "idleState", int, "%d" -entry = currentIdlePosition, "that's current position with CLT and IAT corrections", float, "%.3f" -entry = baseIdlePosition, "current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)", float, "%.3f" +entry = currentIdlePosition, "idle: current position", float, "%.3f" +entry = baseIdlePosition, "idle: base value", float, "%.3f" entry = iacByTpsTaper, "iacByTpsTaper portion of idle", float, "%.3f" entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini b/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini index 204bc70d60..cbeffd4307 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-2chan.ini @@ -85,7 +85,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 03:20:52 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 04:28:21 UTC 2022 pageSize = 21300 page = 1 @@ -4220,8 +4220,8 @@ entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" entry = idleState, "idleState", int, "%d" -entry = currentIdlePosition, "that's current position with CLT and IAT corrections", float, "%.3f" -entry = baseIdlePosition, "current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)", float, "%.3f" +entry = currentIdlePosition, "idle: current position", float, "%.3f" +entry = baseIdlePosition, "idle: base value", float, "%.3f" entry = iacByTpsTaper, "iacByTpsTaper portion of idle", float, "%.3f" entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini b/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini index 27d4405713..e938548c8d 100644 --- a/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini +++ b/firmware/tunerstudio/generated/rusefi_alphax-4chan.ini @@ -85,7 +85,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 03:20:54 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 04:28:23 UTC 2022 pageSize = 21300 page = 1 @@ -4220,8 +4220,8 @@ entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" entry = idleState, "idleState", int, "%d" -entry = currentIdlePosition, "that's current position with CLT and IAT corrections", float, "%.3f" -entry = baseIdlePosition, "current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)", float, "%.3f" +entry = currentIdlePosition, "idle: current position", float, "%.3f" +entry = baseIdlePosition, "idle: base value", float, "%.3f" entry = iacByTpsTaper, "iacByTpsTaper portion of idle", float, "%.3f" entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_atlas.ini b/firmware/tunerstudio/generated/rusefi_atlas.ini index 6879a847bb..df474d883a 100644 --- a/firmware/tunerstudio/generated/rusefi_atlas.ini +++ b/firmware/tunerstudio/generated/rusefi_atlas.ini @@ -85,7 +85,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 03:21:35 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 04:29:03 UTC 2022 pageSize = 21300 page = 1 @@ -4220,8 +4220,8 @@ entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" entry = idleState, "idleState", int, "%d" -entry = currentIdlePosition, "that's current position with CLT and IAT corrections", float, "%.3f" -entry = baseIdlePosition, "current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)", float, "%.3f" +entry = currentIdlePosition, "idle: current position", float, "%.3f" +entry = baseIdlePosition, "idle: base value", float, "%.3f" entry = iacByTpsTaper, "iacByTpsTaper portion of idle", float, "%.3f" entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_core8.ini b/firmware/tunerstudio/generated/rusefi_core8.ini index 97bdecbf74..8190751210 100644 --- a/firmware/tunerstudio/generated/rusefi_core8.ini +++ b/firmware/tunerstudio/generated/rusefi_core8.ini @@ -85,7 +85,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 03:21:19 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 04:28:47 UTC 2022 pageSize = 21300 page = 1 @@ -4220,8 +4220,8 @@ entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" entry = idleState, "idleState", int, "%d" -entry = currentIdlePosition, "that's current position with CLT and IAT corrections", float, "%.3f" -entry = baseIdlePosition, "current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)", float, "%.3f" +entry = currentIdlePosition, "idle: current position", float, "%.3f" +entry = baseIdlePosition, "idle: base value", float, "%.3f" entry = iacByTpsTaper, "iacByTpsTaper portion of idle", float, "%.3f" entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_f407-discovery.ini b/firmware/tunerstudio/generated/rusefi_f407-discovery.ini index 453710c06c..c9b780f75f 100644 --- a/firmware/tunerstudio/generated/rusefi_f407-discovery.ini +++ b/firmware/tunerstudio/generated/rusefi_f407-discovery.ini @@ -85,7 +85,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 03:21:32 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 04:29:00 UTC 2022 pageSize = 21300 page = 1 @@ -4220,8 +4220,8 @@ entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" entry = idleState, "idleState", int, "%d" -entry = currentIdlePosition, "that's current position with CLT and IAT corrections", float, "%.3f" -entry = baseIdlePosition, "current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)", float, "%.3f" +entry = currentIdlePosition, "idle: current position", float, "%.3f" +entry = baseIdlePosition, "idle: base value", float, "%.3f" entry = iacByTpsTaper, "iacByTpsTaper portion of idle", float, "%.3f" entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_f429-discovery.ini b/firmware/tunerstudio/generated/rusefi_f429-discovery.ini index 0c79ebc2a7..74a3e3dd7c 100644 --- a/firmware/tunerstudio/generated/rusefi_f429-discovery.ini +++ b/firmware/tunerstudio/generated/rusefi_f429-discovery.ini @@ -85,7 +85,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 03:21:34 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 04:29:02 UTC 2022 pageSize = 21300 page = 1 @@ -4220,8 +4220,8 @@ entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" entry = idleState, "idleState", int, "%d" -entry = currentIdlePosition, "that's current position with CLT and IAT corrections", float, "%.3f" -entry = baseIdlePosition, "current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)", float, "%.3f" +entry = currentIdlePosition, "idle: current position", float, "%.3f" +entry = baseIdlePosition, "idle: base value", float, "%.3f" entry = iacByTpsTaper, "iacByTpsTaper portion of idle", float, "%.3f" entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini b/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini index b38cbc59cb..e230a9cb83 100644 --- a/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini +++ b/firmware/tunerstudio/generated/rusefi_frankenso_na6.ini @@ -85,7 +85,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 03:21:22 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 04:28:50 UTC 2022 pageSize = 21300 page = 1 @@ -4220,8 +4220,8 @@ entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" entry = idleState, "idleState", int, "%d" -entry = currentIdlePosition, "that's current position with CLT and IAT corrections", float, "%.3f" -entry = baseIdlePosition, "current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)", float, "%.3f" +entry = currentIdlePosition, "idle: current position", float, "%.3f" +entry = baseIdlePosition, "idle: base value", float, "%.3f" entry = iacByTpsTaper, "iacByTpsTaper portion of idle", float, "%.3f" entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_harley81.ini b/firmware/tunerstudio/generated/rusefi_harley81.ini index 7ebef6f7bb..8df663b27f 100644 --- a/firmware/tunerstudio/generated/rusefi_harley81.ini +++ b/firmware/tunerstudio/generated/rusefi_harley81.ini @@ -85,7 +85,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 03:20:56 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 04:28:24 UTC 2022 pageSize = 21300 page = 1 @@ -4220,8 +4220,8 @@ entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" entry = idleState, "idleState", int, "%d" -entry = currentIdlePosition, "that's current position with CLT and IAT corrections", float, "%.3f" -entry = baseIdlePosition, "current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)", float, "%.3f" +entry = currentIdlePosition, "idle: current position", float, "%.3f" +entry = baseIdlePosition, "idle: base value", float, "%.3f" entry = iacByTpsTaper, "iacByTpsTaper portion of idle", float, "%.3f" entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini b/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini index b40d713b93..d54d7aae0b 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen-gm-e67.ini @@ -85,7 +85,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 03:21:11 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 04:28:39 UTC 2022 pageSize = 21300 page = 1 @@ -4220,8 +4220,8 @@ entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" entry = idleState, "idleState", int, "%d" -entry = currentIdlePosition, "that's current position with CLT and IAT corrections", float, "%.3f" -entry = baseIdlePosition, "current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)", float, "%.3f" +entry = currentIdlePosition, "idle: current position", float, "%.3f" +entry = baseIdlePosition, "idle: base value", float, "%.3f" entry = iacByTpsTaper, "iacByTpsTaper portion of idle", float, "%.3f" entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini b/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini index c8f87f6100..77e1b5e403 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen-nb1.ini @@ -85,7 +85,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 03:21:09 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 04:28:37 UTC 2022 pageSize = 21300 page = 1 @@ -4220,8 +4220,8 @@ entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" entry = idleState, "idleState", int, "%d" -entry = currentIdlePosition, "that's current position with CLT and IAT corrections", float, "%.3f" -entry = baseIdlePosition, "current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)", float, "%.3f" +entry = currentIdlePosition, "idle: current position", float, "%.3f" +entry = baseIdlePosition, "idle: base value", float, "%.3f" entry = iacByTpsTaper, "iacByTpsTaper portion of idle", float, "%.3f" entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini b/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini index 97e8830c93..91dddca663 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen121nissan.ini @@ -85,7 +85,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 03:21:01 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 04:28:29 UTC 2022 pageSize = 21300 page = 1 @@ -4220,8 +4220,8 @@ entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" entry = idleState, "idleState", int, "%d" -entry = currentIdlePosition, "that's current position with CLT and IAT corrections", float, "%.3f" -entry = baseIdlePosition, "current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)", float, "%.3f" +entry = currentIdlePosition, "idle: current position", float, "%.3f" +entry = baseIdlePosition, "idle: base value", float, "%.3f" entry = iacByTpsTaper, "iacByTpsTaper portion of idle", float, "%.3f" entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_hellen121vag.ini b/firmware/tunerstudio/generated/rusefi_hellen121vag.ini index ef6a75fdc6..3eae7aec6d 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen121vag.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen121vag.ini @@ -85,7 +85,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 03:20:59 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 04:28:28 UTC 2022 pageSize = 21300 page = 1 @@ -4220,8 +4220,8 @@ entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" entry = idleState, "idleState", int, "%d" -entry = currentIdlePosition, "that's current position with CLT and IAT corrections", float, "%.3f" -entry = baseIdlePosition, "current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)", float, "%.3f" +entry = currentIdlePosition, "idle: current position", float, "%.3f" +entry = baseIdlePosition, "idle: base value", float, "%.3f" entry = iacByTpsTaper, "iacByTpsTaper portion of idle", float, "%.3f" entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini b/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini index a6d5d24a81..a43395b7d6 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen128mercedes.ini @@ -85,7 +85,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 03:20:57 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 04:28:26 UTC 2022 pageSize = 21300 page = 1 @@ -4220,8 +4220,8 @@ entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" entry = idleState, "idleState", int, "%d" -entry = currentIdlePosition, "that's current position with CLT and IAT corrections", float, "%.3f" -entry = baseIdlePosition, "current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)", float, "%.3f" +entry = currentIdlePosition, "idle: current position", float, "%.3f" +entry = baseIdlePosition, "idle: base value", float, "%.3f" entry = iacByTpsTaper, "iacByTpsTaper portion of idle", float, "%.3f" entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini b/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini index 902101ac1e..0b6a01d244 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen154hyundai.ini @@ -85,7 +85,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 03:21:02 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 04:28:31 UTC 2022 pageSize = 21300 page = 1 @@ -4220,8 +4220,8 @@ entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" entry = idleState, "idleState", int, "%d" -entry = currentIdlePosition, "that's current position with CLT and IAT corrections", float, "%.3f" -entry = baseIdlePosition, "current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)", float, "%.3f" +entry = currentIdlePosition, "idle: current position", float, "%.3f" +entry = baseIdlePosition, "idle: base value", float, "%.3f" entry = iacByTpsTaper, "iacByTpsTaper portion of idle", float, "%.3f" entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_hellen72.ini b/firmware/tunerstudio/generated/rusefi_hellen72.ini index bac2afb80f..dc63d7b2c4 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen72.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen72.ini @@ -85,7 +85,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 03:21:06 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 04:28:34 UTC 2022 pageSize = 21300 page = 1 @@ -4220,8 +4220,8 @@ entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" entry = idleState, "idleState", int, "%d" -entry = currentIdlePosition, "that's current position with CLT and IAT corrections", float, "%.3f" -entry = baseIdlePosition, "current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)", float, "%.3f" +entry = currentIdlePosition, "idle: current position", float, "%.3f" +entry = baseIdlePosition, "idle: base value", float, "%.3f" entry = iacByTpsTaper, "iacByTpsTaper portion of idle", float, "%.3f" entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_hellen81.ini b/firmware/tunerstudio/generated/rusefi_hellen81.ini index ff273b4a25..28f614aa11 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen81.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen81.ini @@ -85,7 +85,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 03:21:07 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 04:28:36 UTC 2022 pageSize = 21300 page = 1 @@ -4220,8 +4220,8 @@ entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" entry = idleState, "idleState", int, "%d" -entry = currentIdlePosition, "that's current position with CLT and IAT corrections", float, "%.3f" -entry = baseIdlePosition, "current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)", float, "%.3f" +entry = currentIdlePosition, "idle: current position", float, "%.3f" +entry = baseIdlePosition, "idle: base value", float, "%.3f" entry = iacByTpsTaper, "iacByTpsTaper portion of idle", float, "%.3f" entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini b/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini index 478a3f596c..b7f86087b6 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen88bmw.ini @@ -32,12 +32,12 @@ enable2ndByteCanID = false [MegaTune] ; https://rusefi.com/forum/viewtopic.php?p=36201#p36201 - signature = "rusEFI 2022.07.08.hellen88bmw.2538540918" + signature = "rusEFI 2022.07.08.hellen88bmw.2464597267" [TunerStudio] queryCommand = "S" versionInfo = "V" ; firmware version for title bar. - signature = "rusEFI 2022.07.08.hellen88bmw.2538540918" ; signature is expected to be 7 or more characters. + signature = "rusEFI 2022.07.08.hellen88bmw.2464597267" ; signature is expected to be 7 or more characters. ; TS will try to use legacy temp units in some cases, showing "deg F" on a CLT gauge that's actually deg C useLegacyFTempUnits = false @@ -85,7 +85,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 03:21:04 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 04:28:32 UTC 2022 pageSize = 21300 page = 1 @@ -152,7 +152,7 @@ map_samplingWindow = array, F32, 244, [8], "deg", 1, 0, -720, 720, 2 map_sensor_lowValue = scalar, F32, 276, "kpa", 1, 0, -400, 800, 2 map_sensor_highValue = scalar, F32, 280, "kpa", 1, 0, -400, 800, 2 map_sensor_type = bits, U08, 284, [0:4], "Custom", "DENSO183", "MPX4250", "HONDA3BAR", "NEON_2003", "22012AA090", "GM 3 Bar", "MPX4100", "Toyota 89420-02010", "MPX4250A", "Bosch 2.5", "Mazda1Bar", "GM 2 Bar", "GM 1 Bar", "MPXH6400" -map_sensor_hwChannel = bits, U08, 285, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT" +map_sensor_hwChannel = bits, U08, 285, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",9="Aux TPS2",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT",15="Aux PPS2",16="Aux TPS3" clt_tempC_1 = scalar, F32, 288, "*C", 1, 0, -40, 200, 1 clt_tempC_2 = scalar, F32, 292, "*C", 1, 0, -40, 200, 1 clt_tempC_3 = scalar, F32, 296, "*C", 1, 0, -40, 200, 1 @@ -160,7 +160,7 @@ clt_resistance_1 = scalar, F32, 300, "Ohm", 1, 0, 0, 200000, 1 clt_resistance_2 = scalar, F32, 304, "Ohm", 1, 0, 0, 200000, 1 clt_resistance_3 = scalar, F32, 308, "Ohm", 1, 0, 0, 200000, 1 clt_bias_resistor = scalar, F32, 312, "Ohm", 1, 0, 0, 200000, 1 -clt_adcChannel = bits, U08, 316, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT" +clt_adcChannel = bits, U08, 316, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",9="Aux TPS2",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT",15="Aux PPS2",16="Aux TPS3" iat_tempC_1 = scalar, F32, 320, "*C", 1, 0, -40, 200, 1 iat_tempC_2 = scalar, F32, 324, "*C", 1, 0, -40, 200, 1 iat_tempC_3 = scalar, F32, 328, "*C", 1, 0, -40, 200, 1 @@ -168,7 +168,7 @@ iat_resistance_1 = scalar, F32, 332, "Ohm", 1, 0, 0, 200000, 1 iat_resistance_2 = scalar, F32, 336, "Ohm", 1, 0, 0, 200000, 1 iat_resistance_3 = scalar, F32, 340, "Ohm", 1, 0, 0, 200000, 1 iat_bias_resistor = scalar, F32, 344, "Ohm", 1, 0, 0, 200000, 1 -iat_adcChannel = bits, U08, 348, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT" +iat_adcChannel = bits, U08, 348, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",9="Aux TPS2",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT",15="Aux PPS2",16="Aux TPS3" launchTimingRetard = scalar, S32, 352, "deg", 1, 0, -180, 180, 2 hip9011PrescalerAndSDO = scalar, S32, 356, "integer", 1, 0, 0, 32, 0 knockBandCustom = scalar, F32, 360, "kHz", 1, 0, 0, 20, 2 @@ -199,10 +199,10 @@ displayMode = bits, U08, 440, [0:1], "none", "hd44780", "hd44780 over pcf8574" byFirmwareVersion = scalar, S32, 444, "index", 1, 0, 0, 300, 0 HD44780width = scalar, S32, 448, "index", 1, 0, 0, 300, 0 HD44780height = scalar, S32, 452, "index", 1, 0, 0, 300, 0 -tps1_1AdcChannel = bits, U08, 456, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT" -vbattAdcChannel = bits, U08, 457, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT" -fuelLevelSensor = bits, U08, 458, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT" -tps2_1AdcChannel = bits, U08, 459, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT" +tps1_1AdcChannel = bits, U08, 456, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",9="Aux TPS2",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT",15="Aux PPS2",16="Aux TPS3" +vbattAdcChannel = bits, U08, 457, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",9="Aux TPS2",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT",15="Aux PPS2",16="Aux TPS3" +fuelLevelSensor = bits, U08, 458, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",9="Aux TPS2",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT",15="Aux PPS2",16="Aux TPS3" +tps2_1AdcChannel = bits, U08, 459, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",9="Aux TPS2",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT",15="Aux PPS2",16="Aux TPS3" idle_derivativeFilterLoss = scalar, F32, 460, "x", 1, 0, -1000000, 1000000, 4 trailingSparkAngle = scalar, S32, 464, "angle", 1, 0, 0, 720, 0 trigger_type = bits, U32, 468, [0:6], "custom toothed wheel", "Ford Aspire", "Dodge Neon 1995", "Miata NA", "INVALID", "GM_7X", "Cooper R50", "Mazda SOHC 4", "60/2", "36/1", "Mercedes Two Segment", "Mitsubishi 4G93", "EZ30", "INVALID", "Dodge Neon 2003", "Mazda DOHC 1+4", "1+1", "INVALID", "Single Tooth", "Dodge Ram 1+16", "60/2 VW", "INVALID", "Dodge Stratus", "36_2_2_2", "Nissan Primera", "dev 2JZ 3/34 simulator", "Rover K", "GM 24x 5 degree", "Honda CBR 600", "2JZ_1_12", "Honda CBR 600 custom", "3/1 skipped", "Dodge Neon 2003 crank", "Miata NB", "INVALID", "INVALID", "Subaru 7+6", "Jeep 18-2-2-2", "12 tooth crank", "Dodge Neon 1995 crank only", "Jeep XJ 4 cyl", "FiatIAQ_P8", "Mazda Z5", "INVALID", "Renix 44-2-2", "Renix 66-2-2-2", "Honda K 12+1", "INVALID", "36/2", "Subaru SVX", "1+16", "Subaru 7 without 6", "INVALID", "TriTach", "GM 60/2/2/2", "Skoda Favorit", "Barra 3+1 Cam", "Kawa KX450F", "Nissan VQ35", "INVALID", "Nissan VQ30", "Nissan QR25", "Mitsubishi 3A92", "Subaru SVX Crank 1", "Subaru SVX Cam VVT", "Ford PIP", "Suzuki G13B", "Honda K 4+1", "Nissan MR18 Crank", "32/2", "36-2-1", "36-2-1-1", "INVALID", "INVALID", "GM 24x 3 degree", "trg75" @@ -212,7 +212,7 @@ unused460 = scalar, S32, 480, "", 1, 0, 0, 100, 0 hip9011SpiDevice = bits, U08, 484, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" failedMapFallback = scalar, U08, 485, "kPa", 1, 0, 0, 100, 0 boostControlSafeDutyCycle = scalar, U08, 486, "%", 1, 0, 0, 100, 0 -mafAdcChannel = bits, U08, 487, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT" +mafAdcChannel = bits, U08, 487, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",9="Aux TPS2",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT",15="Aux PPS2",16="Aux TPS3" globalFuelCorrection = scalar, F32, 488, "coef", 1, 0, 0, 1000, 2 adcVcc = scalar, F32, 492, "volts", 1, 0, 0, 6, 3 mapCamDetectionAnglePosition = scalar, F32, 496, "Deg", 1, 0, 0, 360, 0 @@ -221,19 +221,19 @@ camInputs2 = bits, U16, 502, [0:7], 0="NONE",8="17 - CAM",19="16 - CRANK" camInputs3 = bits, U16, 504, [0:7], 0="NONE",8="17 - CAM",19="16 - CRANK" camInputs4 = bits, U16, 506, [0:7], 0="NONE",8="17 - CAM",19="16 - CRANK" -afr_hwChannel = bits, U08, 508, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT" +afr_hwChannel = bits, U08, 508, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",9="Aux TPS2",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT",15="Aux PPS2",16="Aux TPS3" afr_v1 = scalar, F32, 512, "volts", 1, 0, 0, 10, 2 afr_value1 = scalar, F32, 516, "AFR", 1, 0, 0, 1000, 2 afr_v2 = scalar, F32, 520, "volts", 1, 0, 0, 10, 2 afr_value2 = scalar, F32, 524, "AFR", 1, 0, 0, 1000, 2 -throttlePedalPositionAdcChannel = bits, U08, 528, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT" +throttlePedalPositionAdcChannel = bits, U08, 528, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",9="Aux TPS2",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT",15="Aux PPS2",16="Aux TPS3" tle6240_cs = bits, U16, 530, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PF0", "PF1", "PF2", "PF3", "PF4", "PF5", "PF6", "PF7", "PF8", "PF9", "PF10", "PF11", "PF12", "PF13", "PF14", "PF15", "PG0", "PG1", "PG2", "PG3", "PG4", "PG5", "PG6", "PG7", "PG8", "PG9", "PG10", "PG11", "PG12", "PG13", "PG14", "PG15", "PH0", "PH1", "PH2", "PH3", "PH4", "PH5", "PH6", "PH7", "PH8", "PH9", "PH10", "PH11", "PH12", "PH13", "PH14", "PH15", "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15" tle6240_csPinMode = bits, U08, 532, [0:1], "default", "default inverted", "open collector", "open collector inverted" throttlePedalUpPin = bits, U16, 534, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PF0", "PF1", "PF2", "PF3", "PF4", "PF5", "PF6", "PF7", "PF8", "PF9", "PF10", "PF11", "PF12", "PF13", "PF14", "PF15", "PG0", "PG1", "PG2", "PG3", "PG4", "PG5", "PG6", "PG7", "PG8", "PG9", "PG10", "PG11", "PG12", "PG13", "PG14", "PG15", "PH0", "PH1", "PH2", "PH3", "PH4", "PH5", "PH6", "PH7", "PH8", "PH9", "PH10", "PH11", "PH12", "PH13", "PH14", "PH15", "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15" baroSensor_lowValue = scalar, F32, 536, "kpa", 1, 0, -400, 800, 2 baroSensor_highValue = scalar, F32, 540, "kpa", 1, 0, -400, 800, 2 baroSensor_type = bits, U08, 544, [0:4], "Custom", "DENSO183", "MPX4250", "HONDA3BAR", "NEON_2003", "22012AA090", "GM 3 Bar", "MPX4100", "Toyota 89420-02010", "MPX4250A", "Bosch 2.5", "Mazda1Bar", "GM 2 Bar", "GM 1 Bar", "MPXH6400" -baroSensor_hwChannel = bits, U08, 545, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT" +baroSensor_hwChannel = bits, U08, 545, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",9="Aux TPS2",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT",15="Aux PPS2",16="Aux TPS3" idle_solenoidFrequency = scalar, S32, 548, "Hz", 1, 0, 0, 3000, 0 idle_solenoidPin = bits, U16, 552, [0:7], 0="NONE",26="24 - Coil 6",43="29 - Idle",47="50 - Coil 1",53="27 - MAIN",59="3 - INJ_5",60="5 - INJ_4",61="31 - INJ_3",62="2 - IdleC",65="47 - Tach",68="25 - Coil 5",69="23 - Coil 4",70="52 - Coil 3",71="51 - Coil 2",94="4 - INJ_6",95="7 - INJ_7/VVT",96="35 - INJ_8",105="33 - INJ_1",106="32 - INJ_2",112="1 - OUT_PUMP" idle_stepperDirectionPin = bits, U16, 554, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PF0", "PF1", "PF2", "PF3", "PF4", "PF5", "PF6", "PF7", "PF8", "PF9", "PF10", "PF11", "PF12", "PF13", "PF14", "PF15", "PG0", "PG1", "PG2", "PG3", "PG4", "PG5", "PG6", "PG7", "PG8", "PG9", "PG10", "PG11", "PG12", "PG13", "PG14", "PG15", "PH0", "PH1", "PH2", "PH3", "PH4", "PH5", "PH6", "PH7", "PH8", "PH9", "PH10", "PH11", "PH12", "PH13", "PH14", "PH15", "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15" @@ -304,10 +304,10 @@ debugTriggerSync = bits, U16, 678, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2" digitalPotentiometerSpiDevice = bits, U08, 680, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" mc33972_cs = bits, U16, 682, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PF0", "PF1", "PF2", "PF3", "PF4", "PF5", "PF6", "PF7", "PF8", "PF9", "PF10", "PF11", "PF12", "PF13", "PF14", "PF15", "PG0", "PG1", "PG2", "PG3", "PG4", "PG5", "PG6", "PG7", "PG8", "PG9", "PG10", "PG11", "PG12", "PG13", "PG14", "PG15", "PH0", "PH1", "PH2", "PH3", "PH4", "PH5", "PH6", "PH7", "PH8", "PH9", "PH10", "PH11", "PH12", "PH13", "PH14", "PH15", "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15" mc33972_csPinMode = bits, U08, 684, [0:1], "default", "default inverted", "open collector", "open collector inverted" -auxFastSensor1_adcChannel = bits, U08, 685, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT" -tps1_2AdcChannel = bits, U08, 686, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT" -tps2_2AdcChannel = bits, U08, 687, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT" -throttlePedalPositionSecondAdcChannel = bits, U08, 688, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT" +auxFastSensor1_adcChannel = bits, U08, 685, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",9="Aux TPS2",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT",15="Aux PPS2",16="Aux TPS3" +tps1_2AdcChannel = bits, U08, 686, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",9="Aux TPS2",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT",15="Aux PPS2",16="Aux TPS3" +tps2_2AdcChannel = bits, U08, 687, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",9="Aux TPS2",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT",15="Aux PPS2",16="Aux TPS3" +throttlePedalPositionSecondAdcChannel = bits, U08, 688, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",9="Aux TPS2",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT",15="Aux PPS2",16="Aux TPS3" fuelLevelValues = array, U08, 689, [8], "%", 1, 0, 0, 100, 0 afr_type = bits, S08, 697, [0:2], "BPSX", "Innovate", "14Point7", "Narrow", "PLX", "Custom" idle_antiwindupFreq = scalar, F32, 700, "x", 1, 0, -1000000, 1000000, 4 @@ -413,7 +413,7 @@ mc33972spiDevice = bits, U08, 849, [0:2], "Off", "SPI1", "SPI2", "SPI3", "SPI4" stoichRatioSecondary = scalar, U08, 850, ":1", 0.1, 0, 5, 25, 1 etbMaximumPosition = scalar, U08, 851, "%", 1, 0, 70, 100, 0 sdCardPeriodMs = scalar, S16, 852, "ms", 1, 0, 0, 30000, 0 -idlePositionSensor = bits, U08, 854, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT" +idlePositionSensor = bits, U08, 854, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",9="Aux TPS2",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT",15="Aux PPS2",16="Aux TPS3" debugMapAveraging = bits, U16, 856, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PF0", "PF1", "PF2", "PF3", "PF4", "PF5", "PF6", "PF7", "PF8", "PF9", "PF10", "PF11", "PF12", "PF13", "PF14", "PF15", "PG0", "PG1", "PG2", "PG3", "PG4", "PG5", "PG6", "PG7", "PG8", "PG9", "PG10", "PG11", "PG12", "PG13", "PG14", "PG15", "PH0", "PH1", "PH2", "PH3", "PH4", "PH5", "PH6", "PH7", "PH8", "PH9", "PH10", "PH11", "PH12", "PH13", "PH14", "PH15", "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15" starterRelayDisablePin = bits, U16, 858, [0:7], 0="NONE",26="24 - Coil 6",43="29 - Idle",47="50 - Coil 1",53="27 - MAIN",59="3 - INJ_5",60="5 - INJ_4",61="31 - INJ_3",62="2 - IdleC",65="47 - Tach",68="25 - Coil 5",69="23 - Coil 4",70="52 - Coil 3",71="51 - Coil 2",94="4 - INJ_6",95="7 - INJ_7/VVT",96="35 - INJ_8",105="33 - INJ_1",106="32 - INJ_2",112="1 - OUT_PUMP" starterRelayDisablePinMode = bits, U08, 860, [0:1], "default", "default inverted", "open collector", "open collector inverted" @@ -620,9 +620,9 @@ useFSIO4ForSeriousEngineWarning = bits, U32, 1360, [28:28], "false", "true" launchActivateInverted = bits, U32, 1360, [29:29], "false", "true" twoStroke = bits, U32, 1360, [30:30], "Four Stroke", "Two Stroke" skippedWheelOnCam = bits, U32, 1360, [31:31], "On crankshaft", "On camshaft" -hipOutputChannel = bits, U08, 1364, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT" +hipOutputChannel = bits, U08, 1364, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",9="Aux TPS2",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT",15="Aux PPS2",16="Aux TPS3" acSwitch = bits, U16, 1366, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PF0", "PF1", "PF2", "PF3", "PF4", "PF5", "PF6", "PF7", "PF8", "PF9", "PF10", "PF11", "PF12", "PF13", "PF14", "PF15", "PG0", "PG1", "PG2", "PG3", "PG4", "PG5", "PG6", "PG7", "PG8", "PG9", "PG10", "PG11", "PG12", "PG13", "PG14", "PG15", "PH0", "PH1", "PH2", "PH3", "PH4", "PH5", "PH6", "PH7", "PH8", "PH9", "PH10", "PH11", "PH12", "PH13", "PH14", "PH15", "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15" -vRefAdcChannel = bits, U08, 1368, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT" +vRefAdcChannel = bits, U08, 1368, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",9="Aux TPS2",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT",15="Aux PPS2",16="Aux TPS3" etbNeutralPosition = scalar, U08, 1369, "%", 1, 0, 0, 100, 0 idleMode = bits, U08, 1370, [0:0], "Open Loop + Closed Loop", "Open Loop" isInjectionEnabled = bits, U32, 1372, [0:0], "false", "true" @@ -794,7 +794,7 @@ launchActivatePinMode = bits, U08, 1635, [0:1], "DEFAULT", "PULLUP", "PULLDOWN" can2TxPin = bits, U16, 1636, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PF0", "PF1", "PF2", "PF3", "PF4", "PF5", "PF6", "PF7", "PF8", "PF9", "PF10", "PF11", "PF12", "PF13", "PF14", "PF15", "PG0", "PG1", "PG2", "PG3", "PG4", "PG5", "PG6", "PG7", "PG8", "PG9", "PG10", "PG11", "PG12", "PG13", "PG14", "PG15", "PH0", "PH1", "PH2", "PH3", "PH4", "PH5", "PH6", "PH7", "PH8", "PH9", "PH10", "PH11", "PH12", "PH13", "PH14", "PH15", "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15" can2RxPin = bits, U16, 1638, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PF0", "PF1", "PF2", "PF3", "PF4", "PF5", "PF6", "PF7", "PF8", "PF9", "PF10", "PF11", "PF12", "PF13", "PF14", "PF15", "PG0", "PG1", "PG2", "PG3", "PG4", "PG5", "PG6", "PG7", "PG8", "PG9", "PG10", "PG11", "PG12", "PG13", "PG14", "PG15", "PH0", "PH1", "PH2", "PH3", "PH4", "PH5", "PH6", "PH7", "PH8", "PH9", "PH10", "PH11", "PH12", "PH13", "PH14", "PH15", "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15" starterControlPinMode = bits, U08, 1640, [0:1], "default", "default inverted", "open collector", "open collector inverted" -wastegatePositionSensor = bits, U08, 1641, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT" +wastegatePositionSensor = bits, U08, 1641, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",9="Aux TPS2",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT",15="Aux PPS2",16="Aux TPS3" ignOverrideMode = bits, U08, 1642, [0:2], "None", "MAP", "TPS", "Acc Pedal", "Cyl Filling %" injectorPressureType = bits, U08, 1643, [0:0], "Low", "High" hpfpValvePin = bits, U16, 1644, [0:7], 0="NONE",26="24 - Coil 6",43="29 - Idle",47="50 - Coil 1",53="27 - MAIN",59="3 - INJ_5",60="5 - INJ_4",61="31 - INJ_3",62="2 - IdleC",65="47 - Tach",68="25 - Coil 5",69="23 - Coil 4",70="52 - Coil 3",71="51 - Coil 2",94="4 - INJ_6",95="7 - INJ_7/VVT",96="35 - INJ_8",105="33 - INJ_1",106="32 - INJ_2",112="1 - OUT_PUMP" @@ -827,14 +827,14 @@ vvtMode2 = bits, U08, 1745, [0:4], "Inactive", "Single Tooth Second Half", "2JZ" fan2ExtraIdle = scalar, U08, 1746, "%", 1, 0, 0, 100, 0 primingDelay = scalar, U08, 1747, "sec", 0.01, 0, 0, 1, 2 -auxAnalogInputs1 = bits, U08, 1748, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT" -auxAnalogInputs2 = bits, U08, 1749, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT" -auxAnalogInputs3 = bits, U08, 1750, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT" -auxAnalogInputs4 = bits, U08, 1751, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT" -auxAnalogInputs5 = bits, U08, 1752, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT" -auxAnalogInputs6 = bits, U08, 1753, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT" -auxAnalogInputs7 = bits, U08, 1754, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT" -auxAnalogInputs8 = bits, U08, 1755, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT" +auxAnalogInputs1 = bits, U08, 1748, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",9="Aux TPS2",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT",15="Aux PPS2",16="Aux TPS3" +auxAnalogInputs2 = bits, U08, 1749, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",9="Aux TPS2",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT",15="Aux PPS2",16="Aux TPS3" +auxAnalogInputs3 = bits, U08, 1750, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",9="Aux TPS2",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT",15="Aux PPS2",16="Aux TPS3" +auxAnalogInputs4 = bits, U08, 1751, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",9="Aux TPS2",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT",15="Aux PPS2",16="Aux TPS3" +auxAnalogInputs5 = bits, U08, 1752, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",9="Aux TPS2",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT",15="Aux PPS2",16="Aux TPS3" +auxAnalogInputs6 = bits, U08, 1753, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",9="Aux TPS2",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT",15="Aux PPS2",16="Aux TPS3" +auxAnalogInputs7 = bits, U08, 1754, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",9="Aux TPS2",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT",15="Aux PPS2",16="Aux TPS3" +auxAnalogInputs8 = bits, U08, 1755, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",9="Aux TPS2",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT",15="Aux PPS2",16="Aux TPS3" trailingCoilPins1 = bits, U16, 1756, [0:7], 0="NONE",26="24 - Coil 6",43="29 - Idle",47="50 - Coil 1",53="27 - MAIN",59="3 - INJ_5",60="5 - INJ_4",61="31 - INJ_3",62="2 - IdleC",65="47 - Tach",68="25 - Coil 5",69="23 - Coil 4",70="52 - Coil 3",71="51 - Coil 2",94="4 - INJ_6",95="7 - INJ_7/VVT",96="35 - INJ_8",105="33 - INJ_1",106="32 - INJ_2",112="1 - OUT_PUMP" trailingCoilPins2 = bits, U16, 1758, [0:7], 0="NONE",26="24 - Coil 6",43="29 - Idle",47="50 - Coil 1",53="27 - MAIN",59="3 - INJ_5",60="5 - INJ_4",61="31 - INJ_3",62="2 - IdleC",65="47 - Tach",68="25 - Coil 5",69="23 - Coil 4",70="52 - Coil 3",71="51 - Coil 2",94="4 - INJ_6",95="7 - INJ_7/VVT",96="35 - INJ_8",105="33 - INJ_1",106="32 - INJ_2",112="1 - OUT_PUMP" trailingCoilPins3 = bits, U16, 1760, [0:7], 0="NONE",26="24 - Coil 6",43="29 - Idle",47="50 - Coil 1",53="27 - MAIN",59="3 - INJ_5",60="5 - INJ_4",61="31 - INJ_3",62="2 - IdleC",65="47 - Tach",68="25 - Coil 5",69="23 - Coil 4",70="52 - Coil 3",71="51 - Coil 2",94="4 - INJ_6",95="7 - INJ_7/VVT",96="35 - INJ_8",105="33 - INJ_1",106="32 - INJ_2",112="1 - OUT_PUMP" @@ -861,7 +861,7 @@ auxTempSensor1_resistance_1 = scalar, F32, 1808, "Ohm", 1, 0, 0, 200000, 1 auxTempSensor1_resistance_2 = scalar, F32, 1812, "Ohm", 1, 0, 0, 200000, 1 auxTempSensor1_resistance_3 = scalar, F32, 1816, "Ohm", 1, 0, 0, 200000, 1 auxTempSensor1_bias_resistor = scalar, F32, 1820, "Ohm", 1, 0, 0, 200000, 1 -auxTempSensor1_adcChannel = bits, U08, 1824, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT" +auxTempSensor1_adcChannel = bits, U08, 1824, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",9="Aux TPS2",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT",15="Aux PPS2",16="Aux TPS3" auxTempSensor2_tempC_1 = scalar, F32, 1828, "*C", 1, 0, -40, 200, 1 auxTempSensor2_tempC_2 = scalar, F32, 1832, "*C", 1, 0, -40, 200, 1 auxTempSensor2_tempC_3 = scalar, F32, 1836, "*C", 1, 0, -40, 200, 1 @@ -869,7 +869,7 @@ auxTempSensor2_resistance_1 = scalar, F32, 1840, "Ohm", 1, 0, 0, 200000, 1 auxTempSensor2_resistance_2 = scalar, F32, 1844, "Ohm", 1, 0, 0, 200000, 1 auxTempSensor2_resistance_3 = scalar, F32, 1848, "Ohm", 1, 0, 0, 200000, 1 auxTempSensor2_bias_resistor = scalar, F32, 1852, "Ohm", 1, 0, 0, 200000, 1 -auxTempSensor2_adcChannel = bits, U08, 1856, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT" +auxTempSensor2_adcChannel = bits, U08, 1856, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",9="Aux TPS2",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT",15="Aux PPS2",16="Aux TPS3" knockSamplingDuration = scalar, S16, 1860, "Deg", 1, 0, 0, 720, 0 etbFreq = scalar, S16, 1862, "Hz", 1, 0, 0, 3000, 0 etbWastegatePid_pFactor = scalar, F32, 1864, "", 1, 0, -10000, 10000, 4 @@ -909,8 +909,8 @@ stepperEnablePinMode = bits, U08, 1949, [0:1], "default", "default inverted", "o mc33816_rstb = bits, U16, 1950, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PF0", "PF1", "PF2", "PF3", "PF4", "PF5", "PF6", "PF7", "PF8", "PF9", "PF10", "PF11", "PF12", "PF13", "PF14", "PF15", "PG0", "PG1", "PG2", "PG3", "PG4", "PG5", "PG6", "PG7", "PG8", "PG9", "PG10", "PG11", "PG12", "PG13", "PG14", "PG15", "PH0", "PH1", "PH2", "PH3", "PH4", "PH5", "PH6", "PH7", "PH8", "PH9", "PH10", "PH11", "PH12", "PH13", "PH14", "PH15", "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15" mc33816_driven = bits, U16, 1952, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PF0", "PF1", "PF2", "PF3", "PF4", "PF5", "PF6", "PF7", "PF8", "PF9", "PF10", "PF11", "PF12", "PF13", "PF14", "PF15", "PG0", "PG1", "PG2", "PG3", "PG4", "PG5", "PG6", "PG7", "PG8", "PG9", "PG10", "PG11", "PG12", "PG13", "PG14", "PG15", "PH0", "PH1", "PH2", "PH3", "PH4", "PH5", "PH6", "PH7", "PH8", "PH9", "PH10", "PH11", "PH12", "PH13", "PH14", "PH15", "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15" brakePedalPin = bits, U16, 1954, [0:7], "NONE", "INVALID", "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9", "PA10", "PA11", "PA12", "PA13", "PA14", "PA15", "PB0", "PB1", "PB2", "PB3", "PB4", "PB5", "PB6", "PB7", "PB8", "PB9", "PB10", "PB11", "PB12", "PB13", "PB14", "PB15", "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD6", "PD7", "PD8", "PD9", "PD10", "PD11", "PD12", "PD13", "PD14", "PD15", "PE0", "PE1", "PE2", "PE3", "PE4", "PE5", "PE6", "PE7", "PE8", "PE9", "PE10", "PE11", "PE12", "PE13", "PE14", "PE15", "PF0", "PF1", "PF2", "PF3", "PF4", "PF5", "PF6", "PF7", "PF8", "PF9", "PF10", "PF11", "PF12", "PF13", "PF14", "PF15", "PG0", "PG1", "PG2", "PG3", "PG4", "PG5", "PG6", "PG7", "PG8", "PG9", "PG10", "PG11", "PG12", "PG13", "PG14", "PG15", "PH0", "PH1", "PH2", "PH3", "PH4", "PH5", "PH6", "PH7", "PH8", "PH9", "PH10", "PH11", "PH12", "PH13", "PH14", "PH15", "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15" -cj125ua = bits, U08, 1956, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT" -cj125ur = bits, U08, 1957, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT" +cj125ua = bits, U08, 1956, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",9="Aux TPS2",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT",15="Aux PPS2",16="Aux TPS3" +cj125ur = bits, U08, 1957, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",9="Aux TPS2",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT",15="Aux PPS2",16="Aux TPS3" brakePedalPinMode = bits, U08, 1958, [0:1], "DEFAULT", "PULLUP", "PULLDOWN" auxPid1_pFactor = scalar, F32, 1960, "", 1, 0, -10000, 10000, 4 auxPid1_iFactor = scalar, F32, 1964, "", 1, 0, -10000, 10000, 4 @@ -935,7 +935,7 @@ injectorCorrectionPolynomial6 = scalar, F32, 2020, "", 1, 0, -1000, 1000, 4 injectorCorrectionPolynomial7 = scalar, F32, 2024, "", 1, 0, -1000, 1000, 4 injectorCorrectionPolynomial8 = scalar, F32, 2028, "", 1, 0, -1000, 1000, 4 primeBins = array, S08, 2032, [8], "C", 1, 0, -40, 120, 0 -oilPressure_hwChannel = bits, U08, 2040, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT" +oilPressure_hwChannel = bits, U08, 2040, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",9="Aux TPS2",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT",15="Aux PPS2",16="Aux TPS3" oilPressure_v1 = scalar, F32, 2044, "volts", 1, 0, 0, 10, 2 oilPressure_value1 = scalar, F32, 2048, "kPa", 1, 0, 0, 1000000, 2 oilPressure_v2 = scalar, F32, 2052, "volts", 1, 0, 0, 10, 2 @@ -962,12 +962,12 @@ coastingFuelCutTps = scalar, S16, 2094, "%", 1, 0, 0, 20, 0 coastingFuelCutClt = scalar, S16, 2096, "C", 1, 0, -100, 100, 0 pidExtraForLowRpm = scalar, S16, 2098, "%", 1, 0, 0, 100, 0 coastingFuelCutMap = scalar, S16, 2100, "kPa", 1, 0, 0, 250, 0 -highPressureFuel_hwChannel = bits, U08, 2104, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT" +highPressureFuel_hwChannel = bits, U08, 2104, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",9="Aux TPS2",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT",15="Aux PPS2",16="Aux TPS3" highPressureFuel_v1 = scalar, F32, 2108, "volts", 1, 0, 0, 10, 2 highPressureFuel_value1 = scalar, F32, 2112, "kPa", 1, 0, 0, 1000000, 2 highPressureFuel_v2 = scalar, F32, 2116, "volts", 1, 0, 0, 10, 2 highPressureFuel_value2 = scalar, F32, 2120, "kPa", 1, 0, 0, 1000000, 2 -lowPressureFuel_hwChannel = bits, U08, 2124, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT" +lowPressureFuel_hwChannel = bits, U08, 2124, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",9="Aux TPS2",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT",15="Aux PPS2",16="Aux TPS3" lowPressureFuel_v1 = scalar, F32, 2128, "volts", 1, 0, 0, 10, 2 lowPressureFuel_value1 = scalar, F32, 2132, "kPa", 1, 0, 0, 1000000, 2 lowPressureFuel_v2 = scalar, F32, 2136, "volts", 1, 0, 0, 10, 2 @@ -1184,12 +1184,12 @@ torqueRpmBins = array, U16, 3672, [6], "RPM", 1, 0, 0, 65000, 0 torqueLoadBins = array, U16, 3684, [6], "Load", 1, 0, 0, 65000, 0 gearControllerMode = bits, U08, 3696, [0:1], "None", "Button Shift" transmissionControllerMode = bits, U08, 3697, [0:1], "None", "Simple Transmission", "GM 4L6X" -auxLinear1_hwChannel = bits, U08, 3700, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT" +auxLinear1_hwChannel = bits, U08, 3700, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",9="Aux TPS2",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT",15="Aux PPS2",16="Aux TPS3" auxLinear1_v1 = scalar, F32, 3704, "volts", 1, 0, 0, 10, 2 auxLinear1_value1 = scalar, F32, 3708, "kPa", 1, 0, 0, 1000000, 2 auxLinear1_v2 = scalar, F32, 3712, "volts", 1, 0, 0, 10, 2 auxLinear1_value2 = scalar, F32, 3716, "kPa", 1, 0, 0, 1000000, 2 -auxLinear2_hwChannel = bits, U08, 3720, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT" +auxLinear2_hwChannel = bits, U08, 3720, [0:5], 0="NONE",5="73 - TPS",7="17 - CAM",8="Aux BARO",9="Aux TPS2",10="16 - CRANK",11="41 - MAF",12="Aux MAP",13="78 - CLT",14="77 - IAT",15="Aux PPS2",16="Aux TPS3" auxLinear2_v1 = scalar, F32, 3724, "volts", 1, 0, 0, 10, 2 auxLinear2_value1 = scalar, F32, 3728, "kPa", 1, 0, 0, 1000000, 2 auxLinear2_v2 = scalar, F32, 3732, "volts", 1, 0, 0, 10, 2 @@ -4220,8 +4220,8 @@ entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" entry = idleState, "idleState", int, "%d" -entry = currentIdlePosition, "that's current position with CLT and IAT corrections", float, "%.3f" -entry = baseIdlePosition, "current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)", float, "%.3f" +entry = currentIdlePosition, "idle: current position", float, "%.3f" +entry = baseIdlePosition, "idle: base value", float, "%.3f" entry = iacByTpsTaper, "iacByTpsTaper portion of idle", float, "%.3f" entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_hellenNA6.ini b/firmware/tunerstudio/generated/rusefi_hellenNA6.ini index e3ae5348e9..5e99e51dde 100644 --- a/firmware/tunerstudio/generated/rusefi_hellenNA6.ini +++ b/firmware/tunerstudio/generated/rusefi_hellenNA6.ini @@ -85,7 +85,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 03:21:12 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 04:28:40 UTC 2022 pageSize = 21300 page = 1 @@ -4220,8 +4220,8 @@ entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" entry = idleState, "idleState", int, "%d" -entry = currentIdlePosition, "that's current position with CLT and IAT corrections", float, "%.3f" -entry = baseIdlePosition, "current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)", float, "%.3f" +entry = currentIdlePosition, "idle: current position", float, "%.3f" +entry = baseIdlePosition, "idle: base value", float, "%.3f" entry = iacByTpsTaper, "iacByTpsTaper portion of idle", float, "%.3f" entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini b/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini index 819b3c9257..5aee379fbb 100644 --- a/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini +++ b/firmware/tunerstudio/generated/rusefi_hellenNA8_96.ini @@ -85,7 +85,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 03:21:14 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 04:28:42 UTC 2022 pageSize = 21300 page = 1 @@ -4220,8 +4220,8 @@ entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" entry = idleState, "idleState", int, "%d" -entry = currentIdlePosition, "that's current position with CLT and IAT corrections", float, "%.3f" -entry = baseIdlePosition, "current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)", float, "%.3f" +entry = currentIdlePosition, "idle: current position", float, "%.3f" +entry = baseIdlePosition, "idle: base value", float, "%.3f" entry = iacByTpsTaper, "iacByTpsTaper portion of idle", float, "%.3f" entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_hellen_cypress.ini b/firmware/tunerstudio/generated/rusefi_hellen_cypress.ini index cc72b3b715..eff09c4f4a 100644 --- a/firmware/tunerstudio/generated/rusefi_hellen_cypress.ini +++ b/firmware/tunerstudio/generated/rusefi_hellen_cypress.ini @@ -85,7 +85,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Fri Jul 08 03:21:41 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on hellen_cypress_gen_config.bat integration/rusefi_config.txt Fri Jul 08 04:29:09 UTC 2022 pageSize = 21300 page = 1 @@ -4220,8 +4220,8 @@ entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" entry = idleState, "idleState", int, "%d" -entry = currentIdlePosition, "that's current position with CLT and IAT corrections", float, "%.3f" -entry = baseIdlePosition, "current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)", float, "%.3f" +entry = currentIdlePosition, "idle: current position", float, "%.3f" +entry = baseIdlePosition, "idle: base value", float, "%.3f" entry = iacByTpsTaper, "iacByTpsTaper portion of idle", float, "%.3f" entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_kinetis.ini b/firmware/tunerstudio/generated/rusefi_kinetis.ini index 63b6cc31d6..671b1a1f93 100644 --- a/firmware/tunerstudio/generated/rusefi_kinetis.ini +++ b/firmware/tunerstudio/generated/rusefi_kinetis.ini @@ -85,7 +85,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Fri Jul 08 03:21:40 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on kinetis_gen_config.bat integration/rusefi_config.txt Fri Jul 08 04:29:08 UTC 2022 pageSize = 21272 page = 1 @@ -4181,8 +4181,8 @@ entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" entry = idleState, "idleState", int, "%d" -entry = currentIdlePosition, "that's current position with CLT and IAT corrections", float, "%.3f" -entry = baseIdlePosition, "current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)", float, "%.3f" +entry = currentIdlePosition, "idle: current position", float, "%.3f" +entry = baseIdlePosition, "idle: base value", float, "%.3f" entry = iacByTpsTaper, "iacByTpsTaper portion of idle", float, "%.3f" entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_mre_f4.ini b/firmware/tunerstudio/generated/rusefi_mre_f4.ini index aaa37c9b3e..6a116ca43b 100644 --- a/firmware/tunerstudio/generated/rusefi_mre_f4.ini +++ b/firmware/tunerstudio/generated/rusefi_mre_f4.ini @@ -85,7 +85,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 03:21:17 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 04:28:45 UTC 2022 pageSize = 21300 page = 1 @@ -4220,8 +4220,8 @@ entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" entry = idleState, "idleState", int, "%d" -entry = currentIdlePosition, "that's current position with CLT and IAT corrections", float, "%.3f" -entry = baseIdlePosition, "current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)", float, "%.3f" +entry = currentIdlePosition, "idle: current position", float, "%.3f" +entry = baseIdlePosition, "idle: base value", float, "%.3f" entry = iacByTpsTaper, "iacByTpsTaper portion of idle", float, "%.3f" entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_mre_f7.ini b/firmware/tunerstudio/generated/rusefi_mre_f7.ini index 0c9a28f635..c6679fa68d 100644 --- a/firmware/tunerstudio/generated/rusefi_mre_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_mre_f7.ini @@ -85,7 +85,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 03:21:16 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 04:28:44 UTC 2022 pageSize = 21300 page = 1 @@ -4220,8 +4220,8 @@ entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" entry = idleState, "idleState", int, "%d" -entry = currentIdlePosition, "that's current position with CLT and IAT corrections", float, "%.3f" -entry = baseIdlePosition, "current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)", float, "%.3f" +entry = currentIdlePosition, "idle: current position", float, "%.3f" +entry = baseIdlePosition, "idle: base value", float, "%.3f" entry = iacByTpsTaper, "iacByTpsTaper portion of idle", float, "%.3f" entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_prometheus_405.ini b/firmware/tunerstudio/generated/rusefi_prometheus_405.ini index 68272653af..e866e6f0f0 100644 --- a/firmware/tunerstudio/generated/rusefi_prometheus_405.ini +++ b/firmware/tunerstudio/generated/rusefi_prometheus_405.ini @@ -85,7 +85,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 03:21:26 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 04:28:53 UTC 2022 pageSize = 21300 page = 1 @@ -4220,8 +4220,8 @@ entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" entry = idleState, "idleState", int, "%d" -entry = currentIdlePosition, "that's current position with CLT and IAT corrections", float, "%.3f" -entry = baseIdlePosition, "current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)", float, "%.3f" +entry = currentIdlePosition, "idle: current position", float, "%.3f" +entry = baseIdlePosition, "idle: base value", float, "%.3f" entry = iacByTpsTaper, "iacByTpsTaper portion of idle", float, "%.3f" entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_prometheus_469.ini b/firmware/tunerstudio/generated/rusefi_prometheus_469.ini index 3e1db2817f..0fd94ff9dd 100644 --- a/firmware/tunerstudio/generated/rusefi_prometheus_469.ini +++ b/firmware/tunerstudio/generated/rusefi_prometheus_469.ini @@ -85,7 +85,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 03:21:24 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 04:28:52 UTC 2022 pageSize = 21300 page = 1 @@ -4220,8 +4220,8 @@ entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" entry = idleState, "idleState", int, "%d" -entry = currentIdlePosition, "that's current position with CLT and IAT corrections", float, "%.3f" -entry = baseIdlePosition, "current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)", float, "%.3f" +entry = currentIdlePosition, "idle: current position", float, "%.3f" +entry = baseIdlePosition, "idle: base value", float, "%.3f" entry = iacByTpsTaper, "iacByTpsTaper portion of idle", float, "%.3f" entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_proteus_f4.ini b/firmware/tunerstudio/generated/rusefi_proteus_f4.ini index ed6b2a992a..45af024db2 100644 --- a/firmware/tunerstudio/generated/rusefi_proteus_f4.ini +++ b/firmware/tunerstudio/generated/rusefi_proteus_f4.ini @@ -85,7 +85,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 03:21:29 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 04:28:56 UTC 2022 pageSize = 21300 page = 1 @@ -4220,8 +4220,8 @@ entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" entry = idleState, "idleState", int, "%d" -entry = currentIdlePosition, "that's current position with CLT and IAT corrections", float, "%.3f" -entry = baseIdlePosition, "current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)", float, "%.3f" +entry = currentIdlePosition, "idle: current position", float, "%.3f" +entry = baseIdlePosition, "idle: base value", float, "%.3f" entry = iacByTpsTaper, "iacByTpsTaper portion of idle", float, "%.3f" entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_proteus_f7.ini b/firmware/tunerstudio/generated/rusefi_proteus_f7.ini index 8c98dc26c0..ec10ffa1cf 100644 --- a/firmware/tunerstudio/generated/rusefi_proteus_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_proteus_f7.ini @@ -85,7 +85,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 03:21:27 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 04:28:55 UTC 2022 pageSize = 21300 page = 1 @@ -4220,8 +4220,8 @@ entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" entry = idleState, "idleState", int, "%d" -entry = currentIdlePosition, "that's current position with CLT and IAT corrections", float, "%.3f" -entry = baseIdlePosition, "current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)", float, "%.3f" +entry = currentIdlePosition, "idle: current position", float, "%.3f" +entry = baseIdlePosition, "idle: base value", float, "%.3f" entry = iacByTpsTaper, "iacByTpsTaper portion of idle", float, "%.3f" entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_proteus_h7.ini b/firmware/tunerstudio/generated/rusefi_proteus_h7.ini index e390182fec..fc3ebc367e 100644 --- a/firmware/tunerstudio/generated/rusefi_proteus_h7.ini +++ b/firmware/tunerstudio/generated/rusefi_proteus_h7.ini @@ -85,7 +85,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 03:21:30 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 04:28:58 UTC 2022 pageSize = 21300 page = 1 @@ -4220,8 +4220,8 @@ entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" entry = idleState, "idleState", int, "%d" -entry = currentIdlePosition, "that's current position with CLT and IAT corrections", float, "%.3f" -entry = baseIdlePosition, "current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)", float, "%.3f" +entry = currentIdlePosition, "idle: current position", float, "%.3f" +entry = baseIdlePosition, "idle: base value", float, "%.3f" entry = iacByTpsTaper, "iacByTpsTaper portion of idle", float, "%.3f" entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini b/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini index cd46be8bb9..f97103cc91 100644 --- a/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini +++ b/firmware/tunerstudio/generated/rusefi_subaru_eg33_f7.ini @@ -85,7 +85,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh integration/rusefi_config.txt Fri Jul 08 03:21:43 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on config/boards/subaru_eg33/config/gen_subaru_config.sh integration/rusefi_config.txt Fri Jul 08 04:29:11 UTC 2022 pageSize = 21300 page = 1 @@ -4220,8 +4220,8 @@ entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" entry = idleState, "idleState", int, "%d" -entry = currentIdlePosition, "that's current position with CLT and IAT corrections", float, "%.3f" -entry = baseIdlePosition, "current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)", float, "%.3f" +entry = currentIdlePosition, "idle: current position", float, "%.3f" +entry = baseIdlePosition, "idle: base value", float, "%.3f" entry = iacByTpsTaper, "iacByTpsTaper portion of idle", float, "%.3f" entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d" diff --git a/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini b/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini index 2003f4f1d8..b58341e499 100644 --- a/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini +++ b/firmware/tunerstudio/generated/rusefi_tdg-pdm8.ini @@ -85,7 +85,7 @@ enable2ndByteCanID = false ; name = scalar, type, offset, units, scale, translate, lo, hi, digits ; CONFIG_DEFINITION_START -; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 03:21:37 UTC 2022 +; this section was generated automatically by rusEFI tool ConfigDefinition.jar based on gen_config.sh integration/rusefi_config.txt Fri Jul 08 04:29:05 UTC 2022 pageSize = 21300 page = 1 @@ -4220,8 +4220,8 @@ entry = vvtStateIndex, "vvtStateIndex", int, "%d" entry = wallFuelCorrection, "fuel injection time correction to account for wall wetting effect for current cycle", float, "%.3f" entry = wallFuel, "Amount of fuel on the wall, in ms of injector open time for each injector.", float, "%.3f" entry = idleState, "idleState", int, "%d" -entry = currentIdlePosition, "that's current position with CLT and IAT corrections", float, "%.3f" -entry = baseIdlePosition, "current position without adjustments (iacByTpsTaper, afterCrankingIACtaperDuration)", float, "%.3f" +entry = currentIdlePosition, "idle: current position", float, "%.3f" +entry = baseIdlePosition, "idle: base value", float, "%.3f" entry = iacByTpsTaper, "iacByTpsTaper portion of idle", float, "%.3f" entry = throttlePedalUpState, "true in IDLE throttle pedal state, false if driver is touching the pedal", int, "%d" entry = mightResetPid, "The idea of 'mightResetPid' is to reset PID only once - each time when TPS > idlePidDeactivationTpsThreshold.", int, "%d"