diff --git a/firmware/integration/rusefi_config.txt b/firmware/integration/rusefi_config.txt
index 88f49722c3..5d8e17783b 100644
--- a/firmware/integration/rusefi_config.txt
+++ b/firmware/integration/rusefi_config.txt
@@ -392,7 +392,7 @@ bit isCJ125Verbose;enable cj125verbose/disable cj125verbose
 bit cj125isUaDivided;+Is your UA CJ125 output wired to MCU via resistor divider? Ua can go over 3.3v but only at lambda >3, i.e very lean AFR above 44.1\nWhen exposed to free air and 17x gain, Ua will be 4.17 volt
 bit cj125isLsu49;
 bit etb_use_two_wires;+TLE7209 uses two-wire mode. TLE9201 and VNH2SP30 do NOT use two wire mode.
-bit isDoubleSolenoidIdle;
+bit isDoubleSolenoidIdle;+Subaru style where default valve position is somewhere in the middle. First solenoid opens it more while second can close it more than default position.
 bit showSdCardWarning;
 bit cj125isUrDivided;+Is your UR CJ125 output wired to MCU via resistor divider?\nLooks like 3v range should be enough, divider generally not needed.
 bit issue_294_unused;