andreika-git
/
rusefi
mirror of https://github.com/andreika-git/rusefi.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

tunerstudio: move SPI devices to separate menu, move useSpiImu out of experimental

This commit is contained in:
Andrey Gusakov 2024-02-18 15:11:28 +03:00 committed by rusefillc
parent c4e41657ec
commit 9754534afc
2 changed files with 9 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
firmware/integration/rusefi_config.txt
View File

@ -460,7 +460,7 @@ bit cltSensorPulldown
bit iatSensorPulldown
bit allowIdenticalPps
bit overrideVvtTriggerGaps
bit useSpiImu
bit useSpiImu;If enabled - use onboard SPI Accelerometer, otherwise listen for CAN messages
bit enableStagedInjection
int16_t tpsMin;Closed throttle, 1 volt = 200 units.\nSee also tps1_1AdcChannel\nset tps_min X;"ADC", 1, 0, 0, 1023, 0

14
firmware/tunerstudio/rusefi.input
View File

@ -1731,7 +1731,7 @@ gaugeCategory = GPPWM Outputs
; looks like TS would append four system indicators below: Data Logging, ???, Not Connected, Protocol Error
[KeyActions]
showPanel = spi, spiFunction
showPanel = spi, spiBuses
showPanel = con, connection
;
@ -2034,7 +2034,8 @@ menuDialog = main
subMenu = engineTypeDialog, "Popular vehicles"
subMenu = std_separator
subMenu = spiFunction, "SPI"@@if_ts_show_spi
subMenu = spiBuses, "SPI Buses"@@if_ts_show_spi
subMenu = spiDevices, "SPI Devices"@@if_ts_show_spi
subMenu = monitoringSettings, "rusEFI console"
subMenu = std_separator
@ -3741,7 +3742,7 @@ cmd_set_engine_type_default = "@@TS_IO_TEST_COMMAND_char@@@@ts_command_e_TS_
field = "SPI device", hip9011SpiDevice, {isHip9011Enabled == 1}
panel = knockThresholdCurve
dialog = spiFunction, "SPI settings"
dialog = spiBuses, "SPI buses settings"
field = "!ECU reboot needed to apply these settings"
field = "SPI1 enable", is_enabled_spi_1
field = "SPI1 MOSI", spi1mosiPin, {is_enabled_spi_1 == 1}
@ -3769,8 +3770,10 @@ cmd_set_engine_type_default = "@@TS_IO_TEST_COMMAND_char@@@@ts_command_e_TS_
field = "SPI4 enable", is_enabled_spi_4
field = "Accelerometer CS pin", accelerometerCsPin@@if_ts_show_onboard_accelerometer
field = "Accelerometer SPI", accelerometerSpiDevice@@if_ts_show_onboard_accelerometer
dialog = spiDevices, "SPI devices settings"
field = "Use SPI accelerometer", useSpiImu
field = "Accelerometer SPI", accelerometerSpiDevice, {useSpiImu == 1}@@if_ts_show_onboard_accelerometer
field = "Accelerometer CS pin", accelerometerCsPin, {useSpiImu == 1}@@if_ts_show_onboard_accelerometer
dialog = stftPartitioning, "Region Configuration"
field = "Idle region RPM", stft_maxIdleRegionRpm
@ -4715,7 +4718,6 @@ dialog = tcuControls, "Transmission Settings"
field = dacOutputPins1, dacOutputPins1
field = dacOutputPins2, dacOutputPins2
field = "Read RPM matching VSS profile", canInputBCM
field = useSpiImu, useSpiImu
field = auxSpeed1Multiplier, auxSpeed1Multiplier
field = useAuxSpeedForSlipRatio, useAuxSpeedForSlipRatio
field = useVssAsSecondWheelSpeed, useVssAsSecondWheelSpeed